| /****************************************************************************** | |
| * | |
| * This file is provided under a dual BSD/GPLv2 license. When using or | |
| * redistributing this file, you may do so under either license. | |
| * | |
| * GPL LICENSE SUMMARY | |
| * | |
| * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. | |
| * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH | |
| * Copyright(c) 2015 - 2016 Intel Deutschland GmbH | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of version 2 of the GNU General Public License as | |
| * published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, | |
| * USA | |
| * | |
| * The full GNU General Public License is included in this distribution | |
| * in the file called COPYING. | |
| * | |
| * Contact Information: | |
| * Intel Linux Wireless <linuxwifi@intel.com> | |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | |
| * | |
| * BSD LICENSE | |
| * | |
| * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. | |
| * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH | |
| * Copyright(c) 2015 - 2016 Intel Deutschland GmbH | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * | |
| * * Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * * Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in | |
| * the documentation and/or other materials provided with the | |
| * distribution. | |
| * * Neither the name Intel Corporation nor the names of its | |
| * contributors may be used to endorse or promote products derived | |
| * from this software without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| * | |
| *****************************************************************************/ | |
| #ifndef __fw_api_power_h__ | |
| #define __fw_api_power_h__ | |
| /* Power Management Commands, Responses, Notifications */ | |
| /** | |
| * enum iwl_ltr_config_flags - masks for LTR config command flags | |
| * @LTR_CFG_FLAG_FEATURE_ENABLE: Feature operational status | |
| * @LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS: allow LTR change on shadow | |
| * memory access | |
| * @LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH: allow LTR msg send on ANY LTR | |
| * reg change | |
| * @LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3: allow LTR msg send on transition from | |
| * D0 to D3 | |
| * @LTR_CFG_FLAG_SW_SET_SHORT: fixed static short LTR register | |
| * @LTR_CFG_FLAG_SW_SET_LONG: fixed static short LONG register | |
| * @LTR_CFG_FLAG_DENIE_C10_ON_PD: allow going into C10 on PD | |
| */ | |
| enum iwl_ltr_config_flags { | |
| LTR_CFG_FLAG_FEATURE_ENABLE = BIT(0), | |
| LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS = BIT(1), | |
| LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH = BIT(2), | |
| LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3 = BIT(3), | |
| LTR_CFG_FLAG_SW_SET_SHORT = BIT(4), | |
| LTR_CFG_FLAG_SW_SET_LONG = BIT(5), | |
| LTR_CFG_FLAG_DENIE_C10_ON_PD = BIT(6), | |
| }; | |
| /** | |
| * struct iwl_ltr_config_cmd_v1 - configures the LTR | |
| * @flags: See %enum iwl_ltr_config_flags | |
| */ | |
| struct iwl_ltr_config_cmd_v1 { | |
| __le32 flags; | |
| __le32 static_long; | |
| __le32 static_short; | |
| } __packed; /* LTR_CAPABLE_API_S_VER_1 */ | |
| #define LTR_VALID_STATES_NUM 4 | |
| /** | |
| * struct iwl_ltr_config_cmd - configures the LTR | |
| * @flags: See %enum iwl_ltr_config_flags | |
| * @static_long: | |
| * @static_short: | |
| * @ltr_cfg_values: | |
| * @ltr_short_idle_timeout: | |
| */ | |
| struct iwl_ltr_config_cmd { | |
| __le32 flags; | |
| __le32 static_long; | |
| __le32 static_short; | |
| __le32 ltr_cfg_values[LTR_VALID_STATES_NUM]; | |
| __le32 ltr_short_idle_timeout; | |
| } __packed; /* LTR_CAPABLE_API_S_VER_2 */ | |
| /* Radio LP RX Energy Threshold measured in dBm */ | |
| #define POWER_LPRX_RSSI_THRESHOLD 75 | |
| #define POWER_LPRX_RSSI_THRESHOLD_MAX 94 | |
| #define POWER_LPRX_RSSI_THRESHOLD_MIN 30 | |
| /** | |
| * enum iwl_power_flags - masks for power table command flags | |
| * @POWER_FLAGS_POWER_SAVE_ENA_MSK: '1' Allow to save power by turning off | |
| * receiver and transmitter. '0' - does not allow. | |
| * @POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK: '0' Driver disables power management, | |
| * '1' Driver enables PM (use rest of parameters) | |
| * @POWER_FLAGS_SKIP_OVER_DTIM_MSK: '0' PM have to walk up every DTIM, | |
| * '1' PM could sleep over DTIM till listen Interval. | |
| * @POWER_FLAGS_SNOOZE_ENA_MSK: Enable snoozing only if uAPSD is enabled and all | |
| * access categories are both delivery and trigger enabled. | |
| * @POWER_FLAGS_BT_SCO_ENA: Enable BT SCO coex only if uAPSD and | |
| * PBW Snoozing enabled | |
| * @POWER_FLAGS_ADVANCE_PM_ENA_MSK: Advanced PM (uAPSD) enable mask | |
| * @POWER_FLAGS_LPRX_ENA_MSK: Low Power RX enable. | |
| * @POWER_FLAGS_AP_UAPSD_MISBEHAVING_ENA_MSK: AP/GO's uAPSD misbehaving | |
| * detection enablement | |
| */ | |
| enum iwl_power_flags { | |
| POWER_FLAGS_POWER_SAVE_ENA_MSK = BIT(0), | |
| POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK = BIT(1), | |
| POWER_FLAGS_SKIP_OVER_DTIM_MSK = BIT(2), | |
| POWER_FLAGS_SNOOZE_ENA_MSK = BIT(5), | |
| POWER_FLAGS_BT_SCO_ENA = BIT(8), | |
| POWER_FLAGS_ADVANCE_PM_ENA_MSK = BIT(9), | |
| POWER_FLAGS_LPRX_ENA_MSK = BIT(11), | |
| POWER_FLAGS_UAPSD_MISBEHAVING_ENA_MSK = BIT(12), | |
| }; | |
| #define IWL_POWER_VEC_SIZE 5 | |
| /** | |
| * struct iwl_powertable_cmd - legacy power command. Beside old API support this | |
| * is used also with a new power API for device wide power settings. | |
| * POWER_TABLE_CMD = 0x77 (command, has simple generic response) | |
| * | |
| * @flags: Power table command flags from POWER_FLAGS_* | |
| * @keep_alive_seconds: Keep alive period in seconds. Default - 25 sec. | |
| * Minimum allowed:- 3 * DTIM. Keep alive period must be | |
| * set regardless of power scheme or current power state. | |
| * FW use this value also when PM is disabled. | |
| * @rx_data_timeout: Minimum time (usec) from last Rx packet for AM to | |
| * PSM transition - legacy PM | |
| * @tx_data_timeout: Minimum time (usec) from last Tx packet for AM to | |
| * PSM transition - legacy PM | |
| * @sleep_interval: not in use | |
| * @skip_dtim_periods: Number of DTIM periods to skip if Skip over DTIM flag | |
| * is set. For example, if it is required to skip over | |
| * one DTIM, this value need to be set to 2 (DTIM periods). | |
| * @lprx_rssi_threshold: Signal strength up to which LP RX can be enabled. | |
| * Default: 80dbm | |
| */ | |
| struct iwl_powertable_cmd { | |
| /* PM_POWER_TABLE_CMD_API_S_VER_6 */ | |
| __le16 flags; | |
| u8 keep_alive_seconds; | |
| u8 debug_flags; | |
| __le32 rx_data_timeout; | |
| __le32 tx_data_timeout; | |
| __le32 sleep_interval[IWL_POWER_VEC_SIZE]; | |
| __le32 skip_dtim_periods; | |
| __le32 lprx_rssi_threshold; | |
| } __packed; | |
| /** | |
| * enum iwl_device_power_flags - masks for device power command flags | |
| * @DEVIC_POWER_FLAGS_POWER_SAVE_ENA_MSK: '1' Allow to save power by turning off | |
| * receiver and transmitter. '0' - does not allow. | |
| */ | |
| enum iwl_device_power_flags { | |
| DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK = BIT(0), | |
| }; | |
| /** | |
| * struct iwl_device_power_cmd - device wide power command. | |
| * DEVICE_POWER_CMD = 0x77 (command, has simple generic response) | |
| * | |
| * @flags: Power table command flags from DEVICE_POWER_FLAGS_* | |
| */ | |
| struct iwl_device_power_cmd { | |
| /* PM_POWER_TABLE_CMD_API_S_VER_6 */ | |
| __le16 flags; | |
| __le16 reserved; | |
| } __packed; | |
| /** | |
| * struct iwl_mac_power_cmd - New power command containing uAPSD support | |
| * MAC_PM_POWER_TABLE = 0xA9 (command, has simple generic response) | |
| * @id_and_color: MAC contex identifier | |
| * @flags: Power table command flags from POWER_FLAGS_* | |
| * @keep_alive_seconds: Keep alive period in seconds. Default - 25 sec. | |
| * Minimum allowed:- 3 * DTIM. Keep alive period must be | |
| * set regardless of power scheme or current power state. | |
| * FW use this value also when PM is disabled. | |
| * @rx_data_timeout: Minimum time (usec) from last Rx packet for AM to | |
| * PSM transition - legacy PM | |
| * @tx_data_timeout: Minimum time (usec) from last Tx packet for AM to | |
| * PSM transition - legacy PM | |
| * @sleep_interval: not in use | |
| * @skip_dtim_periods: Number of DTIM periods to skip if Skip over DTIM flag | |
| * is set. For example, if it is required to skip over | |
| * one DTIM, this value need to be set to 2 (DTIM periods). | |
| * @rx_data_timeout_uapsd: Minimum time (usec) from last Rx packet for AM to | |
| * PSM transition - uAPSD | |
| * @tx_data_timeout_uapsd: Minimum time (usec) from last Tx packet for AM to | |
| * PSM transition - uAPSD | |
| * @lprx_rssi_threshold: Signal strength up to which LP RX can be enabled. | |
| * Default: 80dbm | |
| * @num_skip_dtim: Number of DTIMs to skip if Skip over DTIM flag is set | |
| * @snooze_interval: Maximum time between attempts to retrieve buffered data | |
| * from the AP [msec] | |
| * @snooze_window: A window of time in which PBW snoozing insures that all | |
| * packets received. It is also the minimum time from last | |
| * received unicast RX packet, before client stops snoozing | |
| * for data. [msec] | |
| * @snooze_step: TBD | |
| * @qndp_tid: TID client shall use for uAPSD QNDP triggers | |
| * @uapsd_ac_flags: Set trigger-enabled and delivery-enabled indication for | |
| * each corresponding AC. | |
| * Use IEEE80211_WMM_IE_STA_QOSINFO_AC* for correct values. | |
| * @uapsd_max_sp: Use IEEE80211_WMM_IE_STA_QOSINFO_SP_* for correct | |
| * values. | |
| * @heavy_tx_thld_packets: TX threshold measured in number of packets | |
| * @heavy_rx_thld_packets: RX threshold measured in number of packets | |
| * @heavy_tx_thld_percentage: TX threshold measured in load's percentage | |
| * @heavy_rx_thld_percentage: RX threshold measured in load's percentage | |
| * @limited_ps_threshold: | |
| */ | |
| struct iwl_mac_power_cmd { | |
| /* CONTEXT_DESC_API_T_VER_1 */ | |
| __le32 id_and_color; | |
| /* CLIENT_PM_POWER_TABLE_S_VER_1 */ | |
| __le16 flags; | |
| __le16 keep_alive_seconds; | |
| __le32 rx_data_timeout; | |
| __le32 tx_data_timeout; | |
| __le32 rx_data_timeout_uapsd; | |
| __le32 tx_data_timeout_uapsd; | |
| u8 lprx_rssi_threshold; | |
| u8 skip_dtim_periods; | |
| __le16 snooze_interval; | |
| __le16 snooze_window; | |
| u8 snooze_step; | |
| u8 qndp_tid; | |
| u8 uapsd_ac_flags; | |
| u8 uapsd_max_sp; | |
| u8 heavy_tx_thld_packets; | |
| u8 heavy_rx_thld_packets; | |
| u8 heavy_tx_thld_percentage; | |
| u8 heavy_rx_thld_percentage; | |
| u8 limited_ps_threshold; | |
| u8 reserved; | |
| } __packed; | |
| /* | |
| * struct iwl_uapsd_misbehaving_ap_notif - FW sends this notification when | |
| * associated AP is identified as improperly implementing uAPSD protocol. | |
| * PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION = 0x78 | |
| * @sta_id: index of station in uCode's station table - associated AP ID in | |
| * this context. | |
| */ | |
| struct iwl_uapsd_misbehaving_ap_notif { | |
| __le32 sta_id; | |
| u8 mac_id; | |
| u8 reserved[3]; | |
| } __packed; | |
| /** | |
| * struct iwl_reduce_tx_power_cmd - TX power reduction command | |
| * REDUCE_TX_POWER_CMD = 0x9f | |
| * @flags: (reserved for future implementation) | |
| * @mac_context_id: id of the mac ctx for which we are reducing TX power. | |
| * @pwr_restriction: TX power restriction in dBms. | |
| */ | |
| struct iwl_reduce_tx_power_cmd { | |
| u8 flags; | |
| u8 mac_context_id; | |
| __le16 pwr_restriction; | |
| } __packed; /* TX_REDUCED_POWER_API_S_VER_1 */ | |
| enum iwl_dev_tx_power_cmd_mode { | |
| IWL_TX_POWER_MODE_SET_MAC = 0, | |
| IWL_TX_POWER_MODE_SET_DEVICE = 1, | |
| IWL_TX_POWER_MODE_SET_CHAINS = 2, | |
| IWL_TX_POWER_MODE_SET_ACK = 3, | |
| }; /* TX_POWER_REDUCED_FLAGS_TYPE_API_E_VER_4 */; | |
| #define IWL_NUM_CHAIN_LIMITS 2 | |
| #define IWL_NUM_SUB_BANDS 5 | |
| /** | |
| * struct iwl_dev_tx_power_cmd - TX power reduction command | |
| * @set_mode: see &enum iwl_dev_tx_power_cmd_mode | |
| * @mac_context_id: id of the mac ctx for which we are reducing TX power. | |
| * @pwr_restriction: TX power restriction in 1/8 dBms. | |
| * @dev_24: device TX power restriction in 1/8 dBms | |
| * @dev_52_low: device TX power restriction upper band - low | |
| * @dev_52_high: device TX power restriction upper band - high | |
| * @per_chain_restriction: per chain restrictions | |
| */ | |
| struct iwl_dev_tx_power_cmd_v3 { | |
| __le32 set_mode; | |
| __le32 mac_context_id; | |
| __le16 pwr_restriction; | |
| __le16 dev_24; | |
| __le16 dev_52_low; | |
| __le16 dev_52_high; | |
| __le16 per_chain_restriction[IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS]; | |
| } __packed; /* TX_REDUCED_POWER_API_S_VER_3 */ | |
| #define IWL_DEV_MAX_TX_POWER 0x7FFF | |
| /** | |
| * struct iwl_dev_tx_power_cmd - TX power reduction command | |
| * @v3: version 3 of the command, embedded here for easier software handling | |
| * @enable_ack_reduction: enable or disable close range ack TX power | |
| * reduction. | |
| */ | |
| struct iwl_dev_tx_power_cmd { | |
| /* v4 is just an extension of v3 - keep this here */ | |
| struct iwl_dev_tx_power_cmd_v3 v3; | |
| u8 enable_ack_reduction; | |
| u8 reserved[3]; | |
| } __packed; /* TX_REDUCED_POWER_API_S_VER_4 */ | |
| /** | |
| * struct iwl_beacon_filter_cmd | |
| * REPLY_BEACON_FILTERING_CMD = 0xd2 (command) | |
| * @id_and_color: MAC contex identifier | |
| * @bf_energy_delta: Used for RSSI filtering, if in 'normal' state. Send beacon | |
| * to driver if delta in Energy values calculated for this and last | |
| * passed beacon is greater than this threshold. Zero value means that | |
| * the Energy change is ignored for beacon filtering, and beacon will | |
| * not be forced to be sent to driver regardless of this delta. Typical | |
| * energy delta 5dB. | |
| * @bf_roaming_energy_delta: Used for RSSI filtering, if in 'roaming' state. | |
| * Send beacon to driver if delta in Energy values calculated for this | |
| * and last passed beacon is greater than this threshold. Zero value | |
| * means that the Energy change is ignored for beacon filtering while in | |
| * Roaming state, typical energy delta 1dB. | |
| * @bf_roaming_state: Used for RSSI filtering. If absolute Energy values | |
| * calculated for current beacon is less than the threshold, use | |
| * Roaming Energy Delta Threshold, otherwise use normal Energy Delta | |
| * Threshold. Typical energy threshold is -72dBm. | |
| * @bf_temp_threshold: This threshold determines the type of temperature | |
| * filtering (Slow or Fast) that is selected (Units are in Celsuis): | |
| * If the current temperature is above this threshold - Fast filter | |
| * will be used, If the current temperature is below this threshold - | |
| * Slow filter will be used. | |
| * @bf_temp_fast_filter: Send Beacon to driver if delta in temperature values | |
| * calculated for this and the last passed beacon is greater than this | |
| * threshold. Zero value means that the temperature change is ignored for | |
| * beacon filtering; beacons will not be forced to be sent to driver | |
| * regardless of whether its temerature has been changed. | |
| * @bf_temp_slow_filter: Send Beacon to driver if delta in temperature values | |
| * calculated for this and the last passed beacon is greater than this | |
| * threshold. Zero value means that the temperature change is ignored for | |
| * beacon filtering; beacons will not be forced to be sent to driver | |
| * regardless of whether its temerature has been changed. | |
| * @bf_enable_beacon_filter: 1, beacon filtering is enabled; 0, disabled. | |
| * @bf_filter_escape_timer: Send beacons to to driver if no beacons were passed | |
| * for a specific period of time. Units: Beacons. | |
| * @ba_escape_timer: Fully receive and parse beacon if no beacons were passed | |
| * for a longer period of time then this escape-timeout. Units: Beacons. | |
| * @ba_enable_beacon_abort: 1, beacon abort is enabled; 0, disabled. | |
| */ | |
| struct iwl_beacon_filter_cmd { | |
| __le32 bf_energy_delta; | |
| __le32 bf_roaming_energy_delta; | |
| __le32 bf_roaming_state; | |
| __le32 bf_temp_threshold; | |
| __le32 bf_temp_fast_filter; | |
| __le32 bf_temp_slow_filter; | |
| __le32 bf_enable_beacon_filter; | |
| __le32 bf_debug_flag; | |
| __le32 bf_escape_timer; | |
| __le32 ba_escape_timer; | |
| __le32 ba_enable_beacon_abort; | |
| } __packed; | |
| /* Beacon filtering and beacon abort */ | |
| #define IWL_BF_ENERGY_DELTA_DEFAULT 5 | |
| #define IWL_BF_ENERGY_DELTA_D0I3 20 | |
| #define IWL_BF_ENERGY_DELTA_MAX 255 | |
| #define IWL_BF_ENERGY_DELTA_MIN 0 | |
| #define IWL_BF_ROAMING_ENERGY_DELTA_DEFAULT 1 | |
| #define IWL_BF_ROAMING_ENERGY_DELTA_D0I3 20 | |
| #define IWL_BF_ROAMING_ENERGY_DELTA_MAX 255 | |
| #define IWL_BF_ROAMING_ENERGY_DELTA_MIN 0 | |
| #define IWL_BF_ROAMING_STATE_DEFAULT 72 | |
| #define IWL_BF_ROAMING_STATE_D0I3 72 | |
| #define IWL_BF_ROAMING_STATE_MAX 255 | |
| #define IWL_BF_ROAMING_STATE_MIN 0 | |
| #define IWL_BF_TEMP_THRESHOLD_DEFAULT 112 | |
| #define IWL_BF_TEMP_THRESHOLD_D0I3 112 | |
| #define IWL_BF_TEMP_THRESHOLD_MAX 255 | |
| #define IWL_BF_TEMP_THRESHOLD_MIN 0 | |
| #define IWL_BF_TEMP_FAST_FILTER_DEFAULT 1 | |
| #define IWL_BF_TEMP_FAST_FILTER_D0I3 1 | |
| #define IWL_BF_TEMP_FAST_FILTER_MAX 255 | |
| #define IWL_BF_TEMP_FAST_FILTER_MIN 0 | |
| #define IWL_BF_TEMP_SLOW_FILTER_DEFAULT 5 | |
| #define IWL_BF_TEMP_SLOW_FILTER_D0I3 20 | |
| #define IWL_BF_TEMP_SLOW_FILTER_MAX 255 | |
| #define IWL_BF_TEMP_SLOW_FILTER_MIN 0 | |
| #define IWL_BF_ENABLE_BEACON_FILTER_DEFAULT 1 | |
| #define IWL_BF_DEBUG_FLAG_DEFAULT 0 | |
| #define IWL_BF_DEBUG_FLAG_D0I3 0 | |
| #define IWL_BF_ESCAPE_TIMER_DEFAULT 0 | |
| #define IWL_BF_ESCAPE_TIMER_D0I3 0 | |
| #define IWL_BF_ESCAPE_TIMER_MAX 1024 | |
| #define IWL_BF_ESCAPE_TIMER_MIN 0 | |
| #define IWL_BA_ESCAPE_TIMER_DEFAULT 6 | |
| #define IWL_BA_ESCAPE_TIMER_D0I3 6 | |
| #define IWL_BA_ESCAPE_TIMER_D3 9 | |
| #define IWL_BA_ESCAPE_TIMER_MAX 1024 | |
| #define IWL_BA_ESCAPE_TIMER_MIN 0 | |
| #define IWL_BA_ENABLE_BEACON_ABORT_DEFAULT 1 | |
| #define IWL_BF_CMD_CONFIG(mode) \ | |
| .bf_energy_delta = cpu_to_le32(IWL_BF_ENERGY_DELTA ## mode), \ | |
| .bf_roaming_energy_delta = \ | |
| cpu_to_le32(IWL_BF_ROAMING_ENERGY_DELTA ## mode), \ | |
| .bf_roaming_state = cpu_to_le32(IWL_BF_ROAMING_STATE ## mode), \ | |
| .bf_temp_threshold = cpu_to_le32(IWL_BF_TEMP_THRESHOLD ## mode), \ | |
| .bf_temp_fast_filter = cpu_to_le32(IWL_BF_TEMP_FAST_FILTER ## mode), \ | |
| .bf_temp_slow_filter = cpu_to_le32(IWL_BF_TEMP_SLOW_FILTER ## mode), \ | |
| .bf_debug_flag = cpu_to_le32(IWL_BF_DEBUG_FLAG ## mode), \ | |
| .bf_escape_timer = cpu_to_le32(IWL_BF_ESCAPE_TIMER ## mode), \ | |
| .ba_escape_timer = cpu_to_le32(IWL_BA_ESCAPE_TIMER ## mode) | |
| #define IWL_BF_CMD_CONFIG_DEFAULTS IWL_BF_CMD_CONFIG(_DEFAULT) | |
| #define IWL_BF_CMD_CONFIG_D0I3 IWL_BF_CMD_CONFIG(_D0I3) | |
| #endif |