| /* | |
| * This file contains the handling of command. | |
| * It prepares command and sends it to firmware when it is ready. | |
| */ | |
| #include <linux/hardirq.h> | |
| #include <linux/kfifo.h> | |
| #include <linux/sched.h> | |
| #include <linux/slab.h> | |
| #include <linux/if_arp.h> | |
| #include <linux/export.h> | |
| #include "decl.h" | |
| #include "cfg.h" | |
| #include "cmd.h" | |
| #define CAL_NF(nf) ((s32)(-(s32)(nf))) | |
| #define CAL_RSSI(snr, nf) ((s32)((s32)(snr) + CAL_NF(nf))) | |
| /** | |
| * lbs_cmd_copyback - Simple callback that copies response back into command | |
| * | |
| * @priv: A pointer to &struct lbs_private structure | |
| * @extra: A pointer to the original command structure for which | |
| * 'resp' is a response | |
| * @resp: A pointer to the command response | |
| * | |
| * returns: 0 on success, error on failure | |
| */ | |
| int lbs_cmd_copyback(struct lbs_private *priv, unsigned long extra, | |
| struct cmd_header *resp) | |
| { | |
| struct cmd_header *buf = (void *)extra; | |
| uint16_t copy_len; | |
| copy_len = min(le16_to_cpu(buf->size), le16_to_cpu(resp->size)); | |
| memcpy(buf, resp, copy_len); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(lbs_cmd_copyback); | |
| /** | |
| * lbs_cmd_async_callback - Simple callback that ignores the result. | |
| * Use this if you just want to send a command to the hardware, but don't | |
| * care for the result. | |
| * | |
| * @priv: ignored | |
| * @extra: ignored | |
| * @resp: ignored | |
| * | |
| * returns: 0 for success | |
| */ | |
| static int lbs_cmd_async_callback(struct lbs_private *priv, unsigned long extra, | |
| struct cmd_header *resp) | |
| { | |
| return 0; | |
| } | |
| /** | |
| * is_command_allowed_in_ps - tests if a command is allowed in Power Save mode | |
| * | |
| * @cmd: the command ID | |
| * | |
| * returns: 1 if allowed, 0 if not allowed | |
| */ | |
| static u8 is_command_allowed_in_ps(u16 cmd) | |
| { | |
| switch (cmd) { | |
| case CMD_802_11_RSSI: | |
| return 1; | |
| case CMD_802_11_HOST_SLEEP_CFG: | |
| return 1; | |
| default: | |
| break; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * lbs_update_hw_spec - Updates the hardware details like MAC address | |
| * and regulatory region | |
| * | |
| * @priv: A pointer to &struct lbs_private structure | |
| * | |
| * returns: 0 on success, error on failure | |
| */ | |
| int lbs_update_hw_spec(struct lbs_private *priv) | |
| { | |
| struct cmd_ds_get_hw_spec cmd; | |
| int ret = -1; | |
| u32 i; | |
| lbs_deb_enter(LBS_DEB_CMD); | |
| memset(&cmd, 0, sizeof(cmd)); | |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
| memcpy(cmd.permanentaddr, priv->current_addr, ETH_ALEN); | |
| ret = lbs_cmd_with_response(priv, CMD_GET_HW_SPEC, &cmd); | |
| if (ret) | |
| goto out; | |
| priv->fwcapinfo = le32_to_cpu(cmd.fwcapinfo); | |
| /* The firmware release is in an interesting format: the patch | |
| * level is in the most significant nibble ... so fix that: */ | |
| priv->fwrelease = le32_to_cpu(cmd.fwrelease); | |
| priv->fwrelease = (priv->fwrelease << 8) | | |
| (priv->fwrelease >> 24 & 0xff); | |
| /* Some firmware capabilities: | |
| * CF card firmware 5.0.16p0: cap 0x00000303 | |
| * USB dongle firmware 5.110.17p2: cap 0x00000303 | |
| */ | |
| netdev_info(priv->dev, "%pM, fw %u.%u.%up%u, cap 0x%08x\n", | |
| cmd.permanentaddr, | |
| priv->fwrelease >> 24 & 0xff, | |
| priv->fwrelease >> 16 & 0xff, | |
| priv->fwrelease >> 8 & 0xff, | |
| priv->fwrelease & 0xff, | |
| priv->fwcapinfo); | |
| lbs_deb_cmd("GET_HW_SPEC: hardware interface 0x%x, hardware spec 0x%04x\n", | |
| cmd.hwifversion, cmd.version); | |
| /* Clamp region code to 8-bit since FW spec indicates that it should | |
| * only ever be 8-bit, even though the field size is 16-bit. Some firmware | |
| * returns non-zero high 8 bits here. | |
| * | |
| * Firmware version 4.0.102 used in CF8381 has region code shifted. We | |
| * need to check for this problem and handle it properly. | |
| */ | |
| if (MRVL_FW_MAJOR_REV(priv->fwrelease) == MRVL_FW_V4) | |
| priv->regioncode = (le16_to_cpu(cmd.regioncode) >> 8) & 0xFF; | |
| else | |
| priv->regioncode = le16_to_cpu(cmd.regioncode) & 0xFF; | |
| for (i = 0; i < MRVDRV_MAX_REGION_CODE; i++) { | |
| /* use the region code to search for the index */ | |
| if (priv->regioncode == lbs_region_code_to_index[i]) | |
| break; | |
| } | |
| /* if it's unidentified region code, use the default (USA) */ | |
| if (i >= MRVDRV_MAX_REGION_CODE) { | |
| priv->regioncode = 0x10; | |
| netdev_info(priv->dev, | |
| "unidentified region code; using the default (USA)\n"); | |
| } | |
| if (priv->current_addr[0] == 0xff) | |
| memmove(priv->current_addr, cmd.permanentaddr, ETH_ALEN); | |
| if (!priv->copied_hwaddr) { | |
| memcpy(priv->dev->dev_addr, priv->current_addr, ETH_ALEN); | |
| if (priv->mesh_dev) | |
| memcpy(priv->mesh_dev->dev_addr, | |
| priv->current_addr, ETH_ALEN); | |
| priv->copied_hwaddr = 1; | |
| } | |
| out: | |
| lbs_deb_leave(LBS_DEB_CMD); | |
| return ret; | |
| } | |
| static int lbs_ret_host_sleep_cfg(struct lbs_private *priv, unsigned long dummy, | |
| struct cmd_header *resp) | |
| { | |
| lbs_deb_enter(LBS_DEB_CMD); | |
| if (priv->is_host_sleep_activated) { | |
| priv->is_host_sleep_configured = 0; | |
| if (priv->psstate == PS_STATE_FULL_POWER) { | |
| priv->is_host_sleep_activated = 0; | |
| wake_up_interruptible(&priv->host_sleep_q); | |
| } | |
| } else { | |
| priv->is_host_sleep_configured = 1; | |
| } | |
| lbs_deb_leave(LBS_DEB_CMD); | |
| return 0; | |
| } | |
| int lbs_host_sleep_cfg(struct lbs_private *priv, uint32_t criteria, | |
| struct wol_config *p_wol_config) | |
| { | |
| struct cmd_ds_host_sleep cmd_config; | |
| int ret; | |
| /* | |
| * Certain firmware versions do not support EHS_REMOVE_WAKEUP command | |
| * and the card will return a failure. Since we need to be | |
| * able to reset the mask, in those cases we set a 0 mask instead. | |
| */ | |
| if (criteria == EHS_REMOVE_WAKEUP && !priv->ehs_remove_supported) | |
| criteria = 0; | |
| cmd_config.hdr.size = cpu_to_le16(sizeof(cmd_config)); | |
| cmd_config.criteria = cpu_to_le32(criteria); | |
| cmd_config.gpio = priv->wol_gpio; | |
| cmd_config.gap = priv->wol_gap; | |
| if (p_wol_config != NULL) | |
| memcpy((uint8_t *)&cmd_config.wol_conf, (uint8_t *)p_wol_config, | |
| sizeof(struct wol_config)); | |
| else | |
| cmd_config.wol_conf.action = CMD_ACT_ACTION_NONE; | |
| ret = __lbs_cmd(priv, CMD_802_11_HOST_SLEEP_CFG, &cmd_config.hdr, | |
| le16_to_cpu(cmd_config.hdr.size), | |
| lbs_ret_host_sleep_cfg, 0); | |
| if (!ret) { | |
| if (p_wol_config) | |
| memcpy((uint8_t *) p_wol_config, | |
| (uint8_t *)&cmd_config.wol_conf, | |
| sizeof(struct wol_config)); | |
| } else { | |
| netdev_info(priv->dev, "HOST_SLEEP_CFG failed %d\n", ret); | |
| } | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(lbs_host_sleep_cfg); | |
| /** | |
| * lbs_set_ps_mode - Sets the Power Save mode | |
| * | |
| * @priv: A pointer to &struct lbs_private structure | |
| * @cmd_action: The Power Save operation (PS_MODE_ACTION_ENTER_PS or | |
| * PS_MODE_ACTION_EXIT_PS) | |
| * @block: Whether to block on a response or not | |
| * | |
| * returns: 0 on success, error on failure | |
| */ | |
| int lbs_set_ps_mode(struct lbs_private *priv, u16 cmd_action, bool block) | |
| { | |
| struct cmd_ds_802_11_ps_mode cmd; | |
| int ret = 0; | |
| lbs_deb_enter(LBS_DEB_CMD); | |
| memset(&cmd, 0, sizeof(cmd)); | |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
| cmd.action = cpu_to_le16(cmd_action); | |
| if (cmd_action == PS_MODE_ACTION_ENTER_PS) { | |
| lbs_deb_cmd("PS_MODE: action ENTER_PS\n"); | |
| cmd.multipledtim = cpu_to_le16(1); /* Default DTIM multiple */ | |
| } else if (cmd_action == PS_MODE_ACTION_EXIT_PS) { | |
| lbs_deb_cmd("PS_MODE: action EXIT_PS\n"); | |
| } else { | |
| /* We don't handle CONFIRM_SLEEP here because it needs to | |
| * be fastpathed to the firmware. | |
| */ | |
| lbs_deb_cmd("PS_MODE: unknown action 0x%X\n", cmd_action); | |
| ret = -EOPNOTSUPP; | |
| goto out; | |
| } | |
| if (block) | |
| ret = lbs_cmd_with_response(priv, CMD_802_11_PS_MODE, &cmd); | |
| else | |
| lbs_cmd_async(priv, CMD_802_11_PS_MODE, &cmd.hdr, sizeof (cmd)); | |
| out: | |
| lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); | |
| return ret; | |
| } | |
| int lbs_cmd_802_11_sleep_params(struct lbs_private *priv, uint16_t cmd_action, | |
| struct sleep_params *sp) | |
| { | |
| struct cmd_ds_802_11_sleep_params cmd; | |
| int ret; | |
| lbs_deb_enter(LBS_DEB_CMD); | |
| if (cmd_action == CMD_ACT_GET) { | |
| memset(&cmd, 0, sizeof(cmd)); | |
| } else { | |
| cmd.error = cpu_to_le16(sp->sp_error); | |
| cmd.offset = cpu_to_le16(sp->sp_offset); | |
| cmd.stabletime = cpu_to_le16(sp->sp_stabletime); | |
| cmd.calcontrol = sp->sp_calcontrol; | |
| cmd.externalsleepclk = sp->sp_extsleepclk; | |
| cmd.reserved = cpu_to_le16(sp->sp_reserved); | |
| } | |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
| cmd.action = cpu_to_le16(cmd_action); | |
| ret = lbs_cmd_with_response(priv, CMD_802_11_SLEEP_PARAMS, &cmd); | |
| if (!ret) { | |
| lbs_deb_cmd("error 0x%x, offset 0x%x, stabletime 0x%x, " | |
| "calcontrol 0x%x extsleepclk 0x%x\n", | |
| le16_to_cpu(cmd.error), le16_to_cpu(cmd.offset), | |
| le16_to_cpu(cmd.stabletime), cmd.calcontrol, | |
| cmd.externalsleepclk); | |
| sp->sp_error = le16_to_cpu(cmd.error); | |
| sp->sp_offset = le16_to_cpu(cmd.offset); | |
| sp->sp_stabletime = le16_to_cpu(cmd.stabletime); | |
| sp->sp_calcontrol = cmd.calcontrol; | |
| sp->sp_extsleepclk = cmd.externalsleepclk; | |
| sp->sp_reserved = le16_to_cpu(cmd.reserved); | |
| } | |
| lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); | |
| return 0; | |
| } | |
| static int lbs_wait_for_ds_awake(struct lbs_private *priv) | |
| { | |
| int ret = 0; | |
| lbs_deb_enter(LBS_DEB_CMD); | |
| if (priv->is_deep_sleep) { | |
| if (!wait_event_interruptible_timeout(priv->ds_awake_q, | |
| !priv->is_deep_sleep, (10 * HZ))) { | |
| netdev_err(priv->dev, "ds_awake_q: timer expired\n"); | |
| ret = -1; | |
| } | |
| } | |
| lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); | |
| return ret; | |
| } | |
| int lbs_set_deep_sleep(struct lbs_private *priv, int deep_sleep) | |
| { | |
| int ret = 0; | |
| lbs_deb_enter(LBS_DEB_CMD); | |
| if (deep_sleep) { | |
| if (priv->is_deep_sleep != 1) { | |
| lbs_deb_cmd("deep sleep: sleep\n"); | |
| BUG_ON(!priv->enter_deep_sleep); | |
| ret = priv->enter_deep_sleep(priv); | |
| if (!ret) { | |
| netif_stop_queue(priv->dev); | |
| netif_carrier_off(priv->dev); | |
| } | |
| } else { | |
| netdev_err(priv->dev, "deep sleep: already enabled\n"); | |
| } | |
| } else { | |
| if (priv->is_deep_sleep) { | |
| lbs_deb_cmd("deep sleep: wakeup\n"); | |
| BUG_ON(!priv->exit_deep_sleep); | |
| ret = priv->exit_deep_sleep(priv); | |
| if (!ret) { | |
| ret = lbs_wait_for_ds_awake(priv); | |
| if (ret) | |
| netdev_err(priv->dev, | |
| "deep sleep: wakeup failed\n"); | |
| } | |
| } | |
| } | |
| lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); | |
| return ret; | |
| } | |
| static int lbs_ret_host_sleep_activate(struct lbs_private *priv, | |
| unsigned long dummy, | |
| struct cmd_header *cmd) | |
| { | |
| lbs_deb_enter(LBS_DEB_FW); | |
| priv->is_host_sleep_activated = 1; | |
| wake_up_interruptible(&priv->host_sleep_q); | |
| lbs_deb_leave(LBS_DEB_FW); | |
| return 0; | |
| } | |
| int lbs_set_host_sleep(struct lbs_private *priv, int host_sleep) | |
| { | |
| struct cmd_header cmd; | |
| int ret = 0; | |
| uint32_t criteria = EHS_REMOVE_WAKEUP; | |
| lbs_deb_enter(LBS_DEB_CMD); | |
| if (host_sleep) { | |
| if (priv->is_host_sleep_activated != 1) { | |
| memset(&cmd, 0, sizeof(cmd)); | |
| ret = lbs_host_sleep_cfg(priv, priv->wol_criteria, | |
| (struct wol_config *)NULL); | |
| if (ret) { | |
| netdev_info(priv->dev, | |
| "Host sleep configuration failed: %d\n", | |
| ret); | |
| return ret; | |
| } | |
| if (priv->psstate == PS_STATE_FULL_POWER) { | |
| ret = __lbs_cmd(priv, | |
| CMD_802_11_HOST_SLEEP_ACTIVATE, | |
| &cmd, | |
| sizeof(cmd), | |
| lbs_ret_host_sleep_activate, 0); | |
| if (ret) | |
| netdev_info(priv->dev, | |
| "HOST_SLEEP_ACTIVATE failed: %d\n", | |
| ret); | |
| } | |
| if (!wait_event_interruptible_timeout( | |
| priv->host_sleep_q, | |
| priv->is_host_sleep_activated, | |
| (10 * HZ))) { | |
| netdev_err(priv->dev, | |
| "host_sleep_q: timer expired\n"); | |
| ret = -1; | |
| } | |
| } else { | |
| netdev_err(priv->dev, "host sleep: already enabled\n"); | |
| } | |
| } else { | |
| if (priv->is_host_sleep_activated) | |
| ret = lbs_host_sleep_cfg(priv, criteria, | |
| (struct wol_config *)NULL); | |
| } | |
| return ret; | |
| } | |
| /** | |
| * lbs_set_snmp_mib - Set an SNMP MIB value | |
| * | |
| * @priv: A pointer to &struct lbs_private structure | |
| * @oid: The OID to set in the firmware | |
| * @val: Value to set the OID to | |
| * | |
| * returns: 0 on success, error on failure | |
| */ | |
| int lbs_set_snmp_mib(struct lbs_private *priv, u32 oid, u16 val) | |
| { | |
| struct cmd_ds_802_11_snmp_mib cmd; | |
| int ret; | |
| lbs_deb_enter(LBS_DEB_CMD); | |
| memset(&cmd, 0, sizeof (cmd)); | |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
| cmd.action = cpu_to_le16(CMD_ACT_SET); | |
| cmd.oid = cpu_to_le16((u16) oid); | |
| switch (oid) { | |
| case SNMP_MIB_OID_BSS_TYPE: | |
| cmd.bufsize = cpu_to_le16(sizeof(u8)); | |
| cmd.value[0] = val; | |
| break; | |
| case SNMP_MIB_OID_11D_ENABLE: | |
| case SNMP_MIB_OID_FRAG_THRESHOLD: | |
| case SNMP_MIB_OID_RTS_THRESHOLD: | |
| case SNMP_MIB_OID_SHORT_RETRY_LIMIT: | |
| case SNMP_MIB_OID_LONG_RETRY_LIMIT: | |
| cmd.bufsize = cpu_to_le16(sizeof(u16)); | |
| *((__le16 *)(&cmd.value)) = cpu_to_le16(val); | |
| break; | |
| default: | |
| lbs_deb_cmd("SNMP_CMD: (set) unhandled OID 0x%x\n", oid); | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| lbs_deb_cmd("SNMP_CMD: (set) oid 0x%x, oid size 0x%x, value 0x%x\n", | |
| le16_to_cpu(cmd.oid), le16_to_cpu(cmd.bufsize), val); | |
| ret = lbs_cmd_with_response(priv, CMD_802_11_SNMP_MIB, &cmd); | |
| out: | |
| lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); | |
| return ret; | |
| } | |
| /** | |
| * lbs_get_snmp_mib - Get an SNMP MIB value | |
| * | |
| * @priv: A pointer to &struct lbs_private structure | |
| * @oid: The OID to retrieve from the firmware | |
| * @out_val: Location for the returned value | |
| * | |
| * returns: 0 on success, error on failure | |
| */ | |
| int lbs_get_snmp_mib(struct lbs_private *priv, u32 oid, u16 *out_val) | |
| { | |
| struct cmd_ds_802_11_snmp_mib cmd; | |
| int ret; | |
| lbs_deb_enter(LBS_DEB_CMD); | |
| memset(&cmd, 0, sizeof (cmd)); | |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
| cmd.action = cpu_to_le16(CMD_ACT_GET); | |
| cmd.oid = cpu_to_le16(oid); | |
| ret = lbs_cmd_with_response(priv, CMD_802_11_SNMP_MIB, &cmd); | |
| if (ret) | |
| goto out; | |
| switch (le16_to_cpu(cmd.bufsize)) { | |
| case sizeof(u8): | |
| *out_val = cmd.value[0]; | |
| break; | |
| case sizeof(u16): | |
| *out_val = le16_to_cpu(*((__le16 *)(&cmd.value))); | |
| break; | |
| default: | |
| lbs_deb_cmd("SNMP_CMD: (get) unhandled OID 0x%x size %d\n", | |
| oid, le16_to_cpu(cmd.bufsize)); | |
| break; | |
| } | |
| out: | |
| lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); | |
| return ret; | |
| } | |
| /** | |
| * lbs_get_tx_power - Get the min, max, and current TX power | |
| * | |
| * @priv: A pointer to &struct lbs_private structure | |
| * @curlevel: Current power level in dBm | |
| * @minlevel: Minimum supported power level in dBm (optional) | |
| * @maxlevel: Maximum supported power level in dBm (optional) | |
| * | |
| * returns: 0 on success, error on failure | |
| */ | |
| int lbs_get_tx_power(struct lbs_private *priv, s16 *curlevel, s16 *minlevel, | |
| s16 *maxlevel) | |
| { | |
| struct cmd_ds_802_11_rf_tx_power cmd; | |
| int ret; | |
| lbs_deb_enter(LBS_DEB_CMD); | |
| memset(&cmd, 0, sizeof(cmd)); | |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
| cmd.action = cpu_to_le16(CMD_ACT_GET); | |
| ret = lbs_cmd_with_response(priv, CMD_802_11_RF_TX_POWER, &cmd); | |
| if (ret == 0) { | |
| *curlevel = le16_to_cpu(cmd.curlevel); | |
| if (minlevel) | |
| *minlevel = cmd.minlevel; | |
| if (maxlevel) | |
| *maxlevel = cmd.maxlevel; | |
| } | |
| lbs_deb_leave(LBS_DEB_CMD); | |
| return ret; | |
| } | |
| /** | |
| * lbs_set_tx_power - Set the TX power | |
| * | |
| * @priv: A pointer to &struct lbs_private structure | |
| * @dbm: The desired power level in dBm | |
| * | |
| * returns: 0 on success, error on failure | |
| */ | |
| int lbs_set_tx_power(struct lbs_private *priv, s16 dbm) | |
| { | |
| struct cmd_ds_802_11_rf_tx_power cmd; | |
| int ret; | |
| lbs_deb_enter(LBS_DEB_CMD); | |
| memset(&cmd, 0, sizeof(cmd)); | |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
| cmd.action = cpu_to_le16(CMD_ACT_SET); | |
| cmd.curlevel = cpu_to_le16(dbm); | |
| lbs_deb_cmd("SET_RF_TX_POWER: %d dBm\n", dbm); | |
| ret = lbs_cmd_with_response(priv, CMD_802_11_RF_TX_POWER, &cmd); | |
| lbs_deb_leave(LBS_DEB_CMD); | |
| return ret; | |
| } | |
| /** | |
| * lbs_set_monitor_mode - Enable or disable monitor mode | |
| * (only implemented on OLPC usb8388 FW) | |
| * | |
| * @priv: A pointer to &struct lbs_private structure | |
| * @enable: 1 to enable monitor mode, 0 to disable | |
| * | |
| * returns: 0 on success, error on failure | |
| */ | |
| int lbs_set_monitor_mode(struct lbs_private *priv, int enable) | |
| { | |
| struct cmd_ds_802_11_monitor_mode cmd; | |
| int ret; | |
| memset(&cmd, 0, sizeof(cmd)); | |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
| cmd.action = cpu_to_le16(CMD_ACT_SET); | |
| if (enable) | |
| cmd.mode = cpu_to_le16(0x1); | |
| lbs_deb_cmd("SET_MONITOR_MODE: %d\n", enable); | |
| ret = lbs_cmd_with_response(priv, CMD_802_11_MONITOR_MODE, &cmd); | |
| if (ret == 0) { | |
| priv->dev->type = enable ? ARPHRD_IEEE80211_RADIOTAP : | |
| ARPHRD_ETHER; | |
| } | |
| lbs_deb_leave(LBS_DEB_CMD); | |
| return ret; | |
| } | |
| /** | |
| * lbs_get_channel - Get the radio channel | |
| * | |
| * @priv: A pointer to &struct lbs_private structure | |
| * | |
| * returns: The channel on success, error on failure | |
| */ | |
| static int lbs_get_channel(struct lbs_private *priv) | |
| { | |
| struct cmd_ds_802_11_rf_channel cmd; | |
| int ret = 0; | |
| lbs_deb_enter(LBS_DEB_CMD); | |
| memset(&cmd, 0, sizeof(cmd)); | |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
| cmd.action = cpu_to_le16(CMD_OPT_802_11_RF_CHANNEL_GET); | |
| ret = lbs_cmd_with_response(priv, CMD_802_11_RF_CHANNEL, &cmd); | |
| if (ret) | |
| goto out; | |
| ret = le16_to_cpu(cmd.channel); | |
| lbs_deb_cmd("current radio channel is %d\n", ret); | |
| out: | |
| lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); | |
| return ret; | |
| } | |
| int lbs_update_channel(struct lbs_private *priv) | |
| { | |
| int ret; | |
| /* the channel in f/w could be out of sync; get the current channel */ | |
| lbs_deb_enter(LBS_DEB_ASSOC); | |
| ret = lbs_get_channel(priv); | |
| if (ret > 0) { | |
| priv->channel = ret; | |
| ret = 0; | |
| } | |
| lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); | |
| return ret; | |
| } | |
| /** | |
| * lbs_set_channel - Set the radio channel | |
| * | |
| * @priv: A pointer to &struct lbs_private structure | |
| * @channel: The desired channel, or 0 to clear a locked channel | |
| * | |
| * returns: 0 on success, error on failure | |
| */ | |
| int lbs_set_channel(struct lbs_private *priv, u8 channel) | |
| { | |
| struct cmd_ds_802_11_rf_channel cmd; | |
| #ifdef DEBUG | |
| u8 old_channel = priv->channel; | |
| #endif | |
| int ret = 0; | |
| lbs_deb_enter(LBS_DEB_CMD); | |
| memset(&cmd, 0, sizeof(cmd)); | |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
| cmd.action = cpu_to_le16(CMD_OPT_802_11_RF_CHANNEL_SET); | |
| cmd.channel = cpu_to_le16(channel); | |
| ret = lbs_cmd_with_response(priv, CMD_802_11_RF_CHANNEL, &cmd); | |
| if (ret) | |
| goto out; | |
| priv->channel = (uint8_t) le16_to_cpu(cmd.channel); | |
| lbs_deb_cmd("channel switch from %d to %d\n", old_channel, | |
| priv->channel); | |
| out: | |
| lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); | |
| return ret; | |
| } | |
| /** | |
| * lbs_get_rssi - Get current RSSI and noise floor | |
| * | |
| * @priv: A pointer to &struct lbs_private structure | |
| * @rssi: On successful return, signal level in mBm | |
| * @nf: On successful return, Noise floor | |
| * | |
| * returns: The channel on success, error on failure | |
| */ | |
| int lbs_get_rssi(struct lbs_private *priv, s8 *rssi, s8 *nf) | |
| { | |
| struct cmd_ds_802_11_rssi cmd; | |
| int ret = 0; | |
| lbs_deb_enter(LBS_DEB_CMD); | |
| BUG_ON(rssi == NULL); | |
| BUG_ON(nf == NULL); | |
| memset(&cmd, 0, sizeof(cmd)); | |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
| /* Average SNR over last 8 beacons */ | |
| cmd.n_or_snr = cpu_to_le16(8); | |
| ret = lbs_cmd_with_response(priv, CMD_802_11_RSSI, &cmd); | |
| if (ret == 0) { | |
| *nf = CAL_NF(le16_to_cpu(cmd.nf)); | |
| *rssi = CAL_RSSI(le16_to_cpu(cmd.n_or_snr), le16_to_cpu(cmd.nf)); | |
| } | |
| lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); | |
| return ret; | |
| } | |
| /** | |
| * lbs_set_11d_domain_info - Send regulatory and 802.11d domain information | |
| * to the firmware | |
| * | |
| * @priv: pointer to &struct lbs_private | |
| * | |
| * returns: 0 on success, error code on failure | |
| */ | |
| int lbs_set_11d_domain_info(struct lbs_private *priv) | |
| { | |
| struct wiphy *wiphy = priv->wdev->wiphy; | |
| struct ieee80211_supported_band **bands = wiphy->bands; | |
| struct cmd_ds_802_11d_domain_info cmd; | |
| struct mrvl_ie_domain_param_set *domain = &cmd.domain; | |
| struct ieee80211_country_ie_triplet *t; | |
| enum nl80211_band band; | |
| struct ieee80211_channel *ch; | |
| u8 num_triplet = 0; | |
| u8 num_parsed_chan = 0; | |
| u8 first_channel = 0, next_chan = 0, max_pwr = 0; | |
| u8 i, flag = 0; | |
| size_t triplet_size; | |
| int ret = 0; | |
| lbs_deb_enter(LBS_DEB_11D); | |
| if (!priv->country_code[0]) | |
| goto out; | |
| memset(&cmd, 0, sizeof(cmd)); | |
| cmd.action = cpu_to_le16(CMD_ACT_SET); | |
| lbs_deb_11d("Setting country code '%c%c'\n", | |
| priv->country_code[0], priv->country_code[1]); | |
| domain->header.type = cpu_to_le16(TLV_TYPE_DOMAIN); | |
| /* Set country code */ | |
| domain->country_code[0] = priv->country_code[0]; | |
| domain->country_code[1] = priv->country_code[1]; | |
| domain->country_code[2] = ' '; | |
| /* Now set up the channel triplets; firmware is somewhat picky here | |
| * and doesn't validate channel numbers and spans; hence it would | |
| * interpret a triplet of (36, 4, 20) as channels 36, 37, 38, 39. Since | |
| * the last 3 aren't valid channels, the driver is responsible for | |
| * splitting that up into 4 triplet pairs of (36, 1, 20) + (40, 1, 20) | |
| * etc. | |
| */ | |
| for (band = 0; | |
| (band < NUM_NL80211_BANDS) && (num_triplet < MAX_11D_TRIPLETS); | |
| band++) { | |
| if (!bands[band]) | |
| continue; | |
| for (i = 0; | |
| (i < bands[band]->n_channels) && (num_triplet < MAX_11D_TRIPLETS); | |
| i++) { | |
| ch = &bands[band]->channels[i]; | |
| if (ch->flags & IEEE80211_CHAN_DISABLED) | |
| continue; | |
| if (!flag) { | |
| flag = 1; | |
| next_chan = first_channel = (u32) ch->hw_value; | |
| max_pwr = ch->max_power; | |
| num_parsed_chan = 1; | |
| continue; | |
| } | |
| if ((ch->hw_value == next_chan + 1) && | |
| (ch->max_power == max_pwr)) { | |
| /* Consolidate adjacent channels */ | |
| next_chan++; | |
| num_parsed_chan++; | |
| } else { | |
| /* Add this triplet */ | |
| lbs_deb_11d("11D triplet (%d, %d, %d)\n", | |
| first_channel, num_parsed_chan, | |
| max_pwr); | |
| t = &domain->triplet[num_triplet]; | |
| t->chans.first_channel = first_channel; | |
| t->chans.num_channels = num_parsed_chan; | |
| t->chans.max_power = max_pwr; | |
| num_triplet++; | |
| flag = 0; | |
| } | |
| } | |
| if (flag) { | |
| /* Add last triplet */ | |
| lbs_deb_11d("11D triplet (%d, %d, %d)\n", first_channel, | |
| num_parsed_chan, max_pwr); | |
| t = &domain->triplet[num_triplet]; | |
| t->chans.first_channel = first_channel; | |
| t->chans.num_channels = num_parsed_chan; | |
| t->chans.max_power = max_pwr; | |
| num_triplet++; | |
| } | |
| } | |
| lbs_deb_11d("# triplets %d\n", num_triplet); | |
| /* Set command header sizes */ | |
| triplet_size = num_triplet * sizeof(struct ieee80211_country_ie_triplet); | |
| domain->header.len = cpu_to_le16(sizeof(domain->country_code) + | |
| triplet_size); | |
| lbs_deb_hex(LBS_DEB_11D, "802.11D domain param set", | |
| (u8 *) &cmd.domain.country_code, | |
| le16_to_cpu(domain->header.len)); | |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd.hdr) + | |
| sizeof(cmd.action) + | |
| sizeof(cmd.domain.header) + | |
| sizeof(cmd.domain.country_code) + | |
| triplet_size); | |
| ret = lbs_cmd_with_response(priv, CMD_802_11D_DOMAIN_INFO, &cmd); | |
| out: | |
| lbs_deb_leave_args(LBS_DEB_11D, "ret %d", ret); | |
| return ret; | |
| } | |
| /** | |
| * lbs_get_reg - Read a MAC, Baseband, or RF register | |
| * | |
| * @priv: pointer to &struct lbs_private | |
| * @reg: register command, one of CMD_MAC_REG_ACCESS, | |
| * CMD_BBP_REG_ACCESS, or CMD_RF_REG_ACCESS | |
| * @offset: byte offset of the register to get | |
| * @value: on success, the value of the register at 'offset' | |
| * | |
| * returns: 0 on success, error code on failure | |
| */ | |
| int lbs_get_reg(struct lbs_private *priv, u16 reg, u16 offset, u32 *value) | |
| { | |
| struct cmd_ds_reg_access cmd; | |
| int ret = 0; | |
| lbs_deb_enter(LBS_DEB_CMD); | |
| BUG_ON(value == NULL); | |
| memset(&cmd, 0, sizeof(cmd)); | |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
| cmd.action = cpu_to_le16(CMD_ACT_GET); | |
| cmd.offset = cpu_to_le16(offset); | |
| if (reg != CMD_MAC_REG_ACCESS && | |
| reg != CMD_BBP_REG_ACCESS && | |
| reg != CMD_RF_REG_ACCESS) { | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| ret = lbs_cmd_with_response(priv, reg, &cmd); | |
| if (!ret) { | |
| if (reg == CMD_BBP_REG_ACCESS || reg == CMD_RF_REG_ACCESS) | |
| *value = cmd.value.bbp_rf; | |
| else if (reg == CMD_MAC_REG_ACCESS) | |
| *value = le32_to_cpu(cmd.value.mac); | |
| } | |
| out: | |
| lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); | |
| return ret; | |
| } | |
| /** | |
| * lbs_set_reg - Write a MAC, Baseband, or RF register | |
| * | |
| * @priv: pointer to &struct lbs_private | |
| * @reg: register command, one of CMD_MAC_REG_ACCESS, | |
| * CMD_BBP_REG_ACCESS, or CMD_RF_REG_ACCESS | |
| * @offset: byte offset of the register to set | |
| * @value: the value to write to the register at 'offset' | |
| * | |
| * returns: 0 on success, error code on failure | |
| */ | |
| int lbs_set_reg(struct lbs_private *priv, u16 reg, u16 offset, u32 value) | |
| { | |
| struct cmd_ds_reg_access cmd; | |
| int ret = 0; | |
| lbs_deb_enter(LBS_DEB_CMD); | |
| memset(&cmd, 0, sizeof(cmd)); | |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
| cmd.action = cpu_to_le16(CMD_ACT_SET); | |
| cmd.offset = cpu_to_le16(offset); | |
| if (reg == CMD_BBP_REG_ACCESS || reg == CMD_RF_REG_ACCESS) | |
| cmd.value.bbp_rf = (u8) (value & 0xFF); | |
| else if (reg == CMD_MAC_REG_ACCESS) | |
| cmd.value.mac = cpu_to_le32(value); | |
| else { | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| ret = lbs_cmd_with_response(priv, reg, &cmd); | |
| out: | |
| lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); | |
| return ret; | |
| } | |
| static void lbs_queue_cmd(struct lbs_private *priv, | |
| struct cmd_ctrl_node *cmdnode) | |
| { | |
| unsigned long flags; | |
| int addtail = 1; | |
| lbs_deb_enter(LBS_DEB_HOST); | |
| if (!cmdnode) { | |
| lbs_deb_host("QUEUE_CMD: cmdnode is NULL\n"); | |
| goto done; | |
| } | |
| if (!cmdnode->cmdbuf->size) { | |
| lbs_deb_host("DNLD_CMD: cmd size is zero\n"); | |
| goto done; | |
| } | |
| cmdnode->result = 0; | |
| /* Exit_PS command needs to be queued in the header always. */ | |
| if (le16_to_cpu(cmdnode->cmdbuf->command) == CMD_802_11_PS_MODE) { | |
| struct cmd_ds_802_11_ps_mode *psm = (void *)cmdnode->cmdbuf; | |
| if (psm->action == cpu_to_le16(PS_MODE_ACTION_EXIT_PS)) { | |
| if (priv->psstate != PS_STATE_FULL_POWER) | |
| addtail = 0; | |
| } | |
| } | |
| if (le16_to_cpu(cmdnode->cmdbuf->command) == CMD_802_11_WAKEUP_CONFIRM) | |
| addtail = 0; | |
| spin_lock_irqsave(&priv->driver_lock, flags); | |
| if (addtail) | |
| list_add_tail(&cmdnode->list, &priv->cmdpendingq); | |
| else | |
| list_add(&cmdnode->list, &priv->cmdpendingq); | |
| spin_unlock_irqrestore(&priv->driver_lock, flags); | |
| lbs_deb_host("QUEUE_CMD: inserted command 0x%04x into cmdpendingq\n", | |
| le16_to_cpu(cmdnode->cmdbuf->command)); | |
| done: | |
| lbs_deb_leave(LBS_DEB_HOST); | |
| } | |
| static void lbs_submit_command(struct lbs_private *priv, | |
| struct cmd_ctrl_node *cmdnode) | |
| { | |
| unsigned long flags; | |
| struct cmd_header *cmd; | |
| uint16_t cmdsize; | |
| uint16_t command; | |
| int timeo = 3 * HZ; | |
| int ret; | |
| lbs_deb_enter(LBS_DEB_HOST); | |
| cmd = cmdnode->cmdbuf; | |
| spin_lock_irqsave(&priv->driver_lock, flags); | |
| priv->seqnum++; | |
| cmd->seqnum = cpu_to_le16(priv->seqnum); | |
| priv->cur_cmd = cmdnode; | |
| spin_unlock_irqrestore(&priv->driver_lock, flags); | |
| cmdsize = le16_to_cpu(cmd->size); | |
| command = le16_to_cpu(cmd->command); | |
| /* These commands take longer */ | |
| if (command == CMD_802_11_SCAN || command == CMD_802_11_ASSOCIATE) | |
| timeo = 5 * HZ; | |
| lbs_deb_cmd("DNLD_CMD: command 0x%04x, seq %d, size %d\n", | |
| command, le16_to_cpu(cmd->seqnum), cmdsize); | |
| lbs_deb_hex(LBS_DEB_CMD, "DNLD_CMD", (void *) cmdnode->cmdbuf, cmdsize); | |
| ret = priv->hw_host_to_card(priv, MVMS_CMD, (u8 *) cmd, cmdsize); | |
| if (ret) { | |
| netdev_info(priv->dev, "DNLD_CMD: hw_host_to_card failed: %d\n", | |
| ret); | |
| /* Reset dnld state machine, report failure */ | |
| priv->dnld_sent = DNLD_RES_RECEIVED; | |
| lbs_complete_command(priv, cmdnode, ret); | |
| } | |
| if (command == CMD_802_11_DEEP_SLEEP) { | |
| if (priv->is_auto_deep_sleep_enabled) { | |
| priv->wakeup_dev_required = 1; | |
| priv->dnld_sent = 0; | |
| } | |
| priv->is_deep_sleep = 1; | |
| lbs_complete_command(priv, cmdnode, 0); | |
| } else { | |
| /* Setup the timer after transmit command */ | |
| mod_timer(&priv->command_timer, jiffies + timeo); | |
| } | |
| lbs_deb_leave(LBS_DEB_HOST); | |
| } | |
| /* | |
| * This function inserts command node to cmdfreeq | |
| * after cleans it. Requires priv->driver_lock held. | |
| */ | |
| static void __lbs_cleanup_and_insert_cmd(struct lbs_private *priv, | |
| struct cmd_ctrl_node *cmdnode) | |
| { | |
| lbs_deb_enter(LBS_DEB_HOST); | |
| if (!cmdnode) | |
| goto out; | |
| cmdnode->callback = NULL; | |
| cmdnode->callback_arg = 0; | |
| memset(cmdnode->cmdbuf, 0, LBS_CMD_BUFFER_SIZE); | |
| list_add_tail(&cmdnode->list, &priv->cmdfreeq); | |
| out: | |
| lbs_deb_leave(LBS_DEB_HOST); | |
| } | |
| static void lbs_cleanup_and_insert_cmd(struct lbs_private *priv, | |
| struct cmd_ctrl_node *ptempcmd) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&priv->driver_lock, flags); | |
| __lbs_cleanup_and_insert_cmd(priv, ptempcmd); | |
| spin_unlock_irqrestore(&priv->driver_lock, flags); | |
| } | |
| void __lbs_complete_command(struct lbs_private *priv, struct cmd_ctrl_node *cmd, | |
| int result) | |
| { | |
| /* | |
| * Normally, commands are removed from cmdpendingq before being | |
| * submitted. However, we can arrive here on alternative codepaths | |
| * where the command is still pending. Make sure the command really | |
| * isn't part of a list at this point. | |
| */ | |
| list_del_init(&cmd->list); | |
| cmd->result = result; | |
| cmd->cmdwaitqwoken = 1; | |
| wake_up(&cmd->cmdwait_q); | |
| if (!cmd->callback || cmd->callback == lbs_cmd_async_callback) | |
| __lbs_cleanup_and_insert_cmd(priv, cmd); | |
| priv->cur_cmd = NULL; | |
| wake_up(&priv->waitq); | |
| } | |
| void lbs_complete_command(struct lbs_private *priv, struct cmd_ctrl_node *cmd, | |
| int result) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&priv->driver_lock, flags); | |
| __lbs_complete_command(priv, cmd, result); | |
| spin_unlock_irqrestore(&priv->driver_lock, flags); | |
| } | |
| int lbs_set_radio(struct lbs_private *priv, u8 preamble, u8 radio_on) | |
| { | |
| struct cmd_ds_802_11_radio_control cmd; | |
| int ret = -EINVAL; | |
| lbs_deb_enter(LBS_DEB_CMD); | |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
| cmd.action = cpu_to_le16(CMD_ACT_SET); | |
| cmd.control = 0; | |
| /* Only v8 and below support setting the preamble */ | |
| if (priv->fwrelease < 0x09000000) { | |
| switch (preamble) { | |
| case RADIO_PREAMBLE_SHORT: | |
| case RADIO_PREAMBLE_AUTO: | |
| case RADIO_PREAMBLE_LONG: | |
| cmd.control = cpu_to_le16(preamble); | |
| break; | |
| default: | |
| goto out; | |
| } | |
| } | |
| if (radio_on) | |
| cmd.control |= cpu_to_le16(0x1); | |
| else { | |
| cmd.control &= cpu_to_le16(~0x1); | |
| priv->txpower_cur = 0; | |
| } | |
| lbs_deb_cmd("RADIO_CONTROL: radio %s, preamble %d\n", | |
| radio_on ? "ON" : "OFF", preamble); | |
| priv->radio_on = radio_on; | |
| ret = lbs_cmd_with_response(priv, CMD_802_11_RADIO_CONTROL, &cmd); | |
| out: | |
| lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret); | |
| return ret; | |
| } | |
| void lbs_set_mac_control(struct lbs_private *priv) | |
| { | |
| struct cmd_ds_mac_control cmd; | |
| lbs_deb_enter(LBS_DEB_CMD); | |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
| cmd.action = cpu_to_le16(priv->mac_control); | |
| cmd.reserved = 0; | |
| lbs_cmd_async(priv, CMD_MAC_CONTROL, &cmd.hdr, sizeof(cmd)); | |
| lbs_deb_leave(LBS_DEB_CMD); | |
| } | |
| int lbs_set_mac_control_sync(struct lbs_private *priv) | |
| { | |
| struct cmd_ds_mac_control cmd; | |
| int ret = 0; | |
| lbs_deb_enter(LBS_DEB_CMD); | |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
| cmd.action = cpu_to_le16(priv->mac_control); | |
| cmd.reserved = 0; | |
| ret = lbs_cmd_with_response(priv, CMD_MAC_CONTROL, &cmd); | |
| lbs_deb_leave(LBS_DEB_CMD); | |
| return ret; | |
| } | |
| /** | |
| * lbs_allocate_cmd_buffer - allocates the command buffer and links | |
| * it to command free queue | |
| * | |
| * @priv: A pointer to &struct lbs_private structure | |
| * | |
| * returns: 0 for success or -1 on error | |
| */ | |
| int lbs_allocate_cmd_buffer(struct lbs_private *priv) | |
| { | |
| int ret = 0; | |
| u32 bufsize; | |
| u32 i; | |
| struct cmd_ctrl_node *cmdarray; | |
| lbs_deb_enter(LBS_DEB_HOST); | |
| /* Allocate and initialize the command array */ | |
| bufsize = sizeof(struct cmd_ctrl_node) * LBS_NUM_CMD_BUFFERS; | |
| if (!(cmdarray = kzalloc(bufsize, GFP_KERNEL))) { | |
| lbs_deb_host("ALLOC_CMD_BUF: tempcmd_array is NULL\n"); | |
| ret = -1; | |
| goto done; | |
| } | |
| priv->cmd_array = cmdarray; | |
| /* Allocate and initialize each command buffer in the command array */ | |
| for (i = 0; i < LBS_NUM_CMD_BUFFERS; i++) { | |
| cmdarray[i].cmdbuf = kzalloc(LBS_CMD_BUFFER_SIZE, GFP_KERNEL); | |
| if (!cmdarray[i].cmdbuf) { | |
| lbs_deb_host("ALLOC_CMD_BUF: ptempvirtualaddr is NULL\n"); | |
| ret = -1; | |
| goto done; | |
| } | |
| } | |
| for (i = 0; i < LBS_NUM_CMD_BUFFERS; i++) { | |
| init_waitqueue_head(&cmdarray[i].cmdwait_q); | |
| lbs_cleanup_and_insert_cmd(priv, &cmdarray[i]); | |
| } | |
| ret = 0; | |
| done: | |
| lbs_deb_leave_args(LBS_DEB_HOST, "ret %d", ret); | |
| return ret; | |
| } | |
| /** | |
| * lbs_free_cmd_buffer - free the command buffer | |
| * | |
| * @priv: A pointer to &struct lbs_private structure | |
| * | |
| * returns: 0 for success | |
| */ | |
| int lbs_free_cmd_buffer(struct lbs_private *priv) | |
| { | |
| struct cmd_ctrl_node *cmdarray; | |
| unsigned int i; | |
| lbs_deb_enter(LBS_DEB_HOST); | |
| /* need to check if cmd array is allocated or not */ | |
| if (priv->cmd_array == NULL) { | |
| lbs_deb_host("FREE_CMD_BUF: cmd_array is NULL\n"); | |
| goto done; | |
| } | |
| cmdarray = priv->cmd_array; | |
| /* Release shared memory buffers */ | |
| for (i = 0; i < LBS_NUM_CMD_BUFFERS; i++) { | |
| if (cmdarray[i].cmdbuf) { | |
| kfree(cmdarray[i].cmdbuf); | |
| cmdarray[i].cmdbuf = NULL; | |
| } | |
| } | |
| /* Release cmd_ctrl_node */ | |
| if (priv->cmd_array) { | |
| kfree(priv->cmd_array); | |
| priv->cmd_array = NULL; | |
| } | |
| done: | |
| lbs_deb_leave(LBS_DEB_HOST); | |
| return 0; | |
| } | |
| /** | |
| * lbs_get_free_cmd_node - gets a free command node if available in | |
| * command free queue | |
| * | |
| * @priv: A pointer to &struct lbs_private structure | |
| * | |
| * returns: A pointer to &cmd_ctrl_node structure on success | |
| * or %NULL on error | |
| */ | |
| static struct cmd_ctrl_node *lbs_get_free_cmd_node(struct lbs_private *priv) | |
| { | |
| struct cmd_ctrl_node *tempnode; | |
| unsigned long flags; | |
| lbs_deb_enter(LBS_DEB_HOST); | |
| if (!priv) | |
| return NULL; | |
| spin_lock_irqsave(&priv->driver_lock, flags); | |
| if (!list_empty(&priv->cmdfreeq)) { | |
| tempnode = list_first_entry(&priv->cmdfreeq, | |
| struct cmd_ctrl_node, list); | |
| list_del_init(&tempnode->list); | |
| } else { | |
| lbs_deb_host("GET_CMD_NODE: cmd_ctrl_node is not available\n"); | |
| tempnode = NULL; | |
| } | |
| spin_unlock_irqrestore(&priv->driver_lock, flags); | |
| lbs_deb_leave(LBS_DEB_HOST); | |
| return tempnode; | |
| } | |
| /** | |
| * lbs_execute_next_command - execute next command in command | |
| * pending queue. Will put firmware back to PS mode if applicable. | |
| * | |
| * @priv: A pointer to &struct lbs_private structure | |
| * | |
| * returns: 0 on success or -1 on error | |
| */ | |
| int lbs_execute_next_command(struct lbs_private *priv) | |
| { | |
| struct cmd_ctrl_node *cmdnode = NULL; | |
| struct cmd_header *cmd; | |
| unsigned long flags; | |
| int ret = 0; | |
| /* Debug group is LBS_DEB_THREAD and not LBS_DEB_HOST, because the | |
| * only caller to us is lbs_thread() and we get even when a | |
| * data packet is received */ | |
| lbs_deb_enter(LBS_DEB_THREAD); | |
| spin_lock_irqsave(&priv->driver_lock, flags); | |
| if (priv->cur_cmd) { | |
| netdev_alert(priv->dev, | |
| "EXEC_NEXT_CMD: already processing command!\n"); | |
| spin_unlock_irqrestore(&priv->driver_lock, flags); | |
| ret = -1; | |
| goto done; | |
| } | |
| if (!list_empty(&priv->cmdpendingq)) { | |
| cmdnode = list_first_entry(&priv->cmdpendingq, | |
| struct cmd_ctrl_node, list); | |
| } | |
| spin_unlock_irqrestore(&priv->driver_lock, flags); | |
| if (cmdnode) { | |
| cmd = cmdnode->cmdbuf; | |
| if (is_command_allowed_in_ps(le16_to_cpu(cmd->command))) { | |
| if ((priv->psstate == PS_STATE_SLEEP) || | |
| (priv->psstate == PS_STATE_PRE_SLEEP)) { | |
| lbs_deb_host( | |
| "EXEC_NEXT_CMD: cannot send cmd 0x%04x in psstate %d\n", | |
| le16_to_cpu(cmd->command), | |
| priv->psstate); | |
| ret = -1; | |
| goto done; | |
| } | |
| lbs_deb_host("EXEC_NEXT_CMD: OK to send command " | |
| "0x%04x in psstate %d\n", | |
| le16_to_cpu(cmd->command), priv->psstate); | |
| } else if (priv->psstate != PS_STATE_FULL_POWER) { | |
| /* | |
| * 1. Non-PS command: | |
| * Queue it. set needtowakeup to TRUE if current state | |
| * is SLEEP, otherwise call send EXIT_PS. | |
| * 2. PS command but not EXIT_PS: | |
| * Ignore it. | |
| * 3. PS command EXIT_PS: | |
| * Set needtowakeup to TRUE if current state is SLEEP, | |
| * otherwise send this command down to firmware | |
| * immediately. | |
| */ | |
| if (cmd->command != cpu_to_le16(CMD_802_11_PS_MODE)) { | |
| /* Prepare to send Exit PS, | |
| * this non PS command will be sent later */ | |
| if ((priv->psstate == PS_STATE_SLEEP) | |
| || (priv->psstate == PS_STATE_PRE_SLEEP) | |
| ) { | |
| /* w/ new scheme, it will not reach here. | |
| since it is blocked in main_thread. */ | |
| priv->needtowakeup = 1; | |
| } else { | |
| lbs_set_ps_mode(priv, | |
| PS_MODE_ACTION_EXIT_PS, | |
| false); | |
| } | |
| ret = 0; | |
| goto done; | |
| } else { | |
| /* | |
| * PS command. Ignore it if it is not Exit_PS. | |
| * otherwise send it down immediately. | |
| */ | |
| struct cmd_ds_802_11_ps_mode *psm = (void *)cmd; | |
| lbs_deb_host( | |
| "EXEC_NEXT_CMD: PS cmd, action 0x%02x\n", | |
| psm->action); | |
| if (psm->action != | |
| cpu_to_le16(PS_MODE_ACTION_EXIT_PS)) { | |
| lbs_deb_host( | |
| "EXEC_NEXT_CMD: ignore ENTER_PS cmd\n"); | |
| lbs_complete_command(priv, cmdnode, 0); | |
| ret = 0; | |
| goto done; | |
| } | |
| if ((priv->psstate == PS_STATE_SLEEP) || | |
| (priv->psstate == PS_STATE_PRE_SLEEP)) { | |
| lbs_deb_host( | |
| "EXEC_NEXT_CMD: ignore EXIT_PS cmd in sleep\n"); | |
| lbs_complete_command(priv, cmdnode, 0); | |
| priv->needtowakeup = 1; | |
| ret = 0; | |
| goto done; | |
| } | |
| lbs_deb_host( | |
| "EXEC_NEXT_CMD: sending EXIT_PS\n"); | |
| } | |
| } | |
| spin_lock_irqsave(&priv->driver_lock, flags); | |
| list_del_init(&cmdnode->list); | |
| spin_unlock_irqrestore(&priv->driver_lock, flags); | |
| lbs_deb_host("EXEC_NEXT_CMD: sending command 0x%04x\n", | |
| le16_to_cpu(cmd->command)); | |
| lbs_submit_command(priv, cmdnode); | |
| } else { | |
| /* | |
| * check if in power save mode, if yes, put the device back | |
| * to PS mode | |
| */ | |
| if ((priv->psmode != LBS802_11POWERMODECAM) && | |
| (priv->psstate == PS_STATE_FULL_POWER) && | |
| (priv->connect_status == LBS_CONNECTED)) { | |
| lbs_deb_host( | |
| "EXEC_NEXT_CMD: cmdpendingq empty, go back to PS_SLEEP"); | |
| lbs_set_ps_mode(priv, PS_MODE_ACTION_ENTER_PS, | |
| false); | |
| } | |
| } | |
| ret = 0; | |
| done: | |
| lbs_deb_leave(LBS_DEB_THREAD); | |
| return ret; | |
| } | |
| static void lbs_send_confirmsleep(struct lbs_private *priv) | |
| { | |
| unsigned long flags; | |
| int ret; | |
| lbs_deb_enter(LBS_DEB_HOST); | |
| lbs_deb_hex(LBS_DEB_HOST, "sleep confirm", (u8 *) &confirm_sleep, | |
| sizeof(confirm_sleep)); | |
| ret = priv->hw_host_to_card(priv, MVMS_CMD, (u8 *) &confirm_sleep, | |
| sizeof(confirm_sleep)); | |
| if (ret) { | |
| netdev_alert(priv->dev, "confirm_sleep failed\n"); | |
| goto out; | |
| } | |
| spin_lock_irqsave(&priv->driver_lock, flags); | |
| /* We don't get a response on the sleep-confirmation */ | |
| priv->dnld_sent = DNLD_RES_RECEIVED; | |
| if (priv->is_host_sleep_configured) { | |
| priv->is_host_sleep_activated = 1; | |
| wake_up_interruptible(&priv->host_sleep_q); | |
| } | |
| /* If nothing to do, go back to sleep (?) */ | |
| if (!kfifo_len(&priv->event_fifo) && !priv->resp_len[priv->resp_idx]) | |
| priv->psstate = PS_STATE_SLEEP; | |
| spin_unlock_irqrestore(&priv->driver_lock, flags); | |
| out: | |
| lbs_deb_leave(LBS_DEB_HOST); | |
| } | |
| /** | |
| * lbs_ps_confirm_sleep - checks condition and prepares to | |
| * send sleep confirm command to firmware if ok | |
| * | |
| * @priv: A pointer to &struct lbs_private structure | |
| * | |
| * returns: n/a | |
| */ | |
| void lbs_ps_confirm_sleep(struct lbs_private *priv) | |
| { | |
| unsigned long flags =0; | |
| int allowed = 1; | |
| lbs_deb_enter(LBS_DEB_HOST); | |
| spin_lock_irqsave(&priv->driver_lock, flags); | |
| if (priv->dnld_sent) { | |
| allowed = 0; | |
| lbs_deb_host("dnld_sent was set\n"); | |
| } | |
| /* In-progress command? */ | |
| if (priv->cur_cmd) { | |
| allowed = 0; | |
| lbs_deb_host("cur_cmd was set\n"); | |
| } | |
| /* Pending events or command responses? */ | |
| if (kfifo_len(&priv->event_fifo) || priv->resp_len[priv->resp_idx]) { | |
| allowed = 0; | |
| lbs_deb_host("pending events or command responses\n"); | |
| } | |
| spin_unlock_irqrestore(&priv->driver_lock, flags); | |
| if (allowed) { | |
| lbs_deb_host("sending lbs_ps_confirm_sleep\n"); | |
| lbs_send_confirmsleep(priv); | |
| } else { | |
| lbs_deb_host("sleep confirm has been delayed\n"); | |
| } | |
| lbs_deb_leave(LBS_DEB_HOST); | |
| } | |
| /** | |
| * lbs_set_tpc_cfg - Configures the transmission power control functionality | |
| * | |
| * @priv: A pointer to &struct lbs_private structure | |
| * @enable: Transmission power control enable | |
| * @p0: Power level when link quality is good (dBm). | |
| * @p1: Power level when link quality is fair (dBm). | |
| * @p2: Power level when link quality is poor (dBm). | |
| * @usesnr: Use Signal to Noise Ratio in TPC | |
| * | |
| * returns: 0 on success | |
| */ | |
| int lbs_set_tpc_cfg(struct lbs_private *priv, int enable, int8_t p0, int8_t p1, | |
| int8_t p2, int usesnr) | |
| { | |
| struct cmd_ds_802_11_tpc_cfg cmd; | |
| int ret; | |
| memset(&cmd, 0, sizeof(cmd)); | |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
| cmd.action = cpu_to_le16(CMD_ACT_SET); | |
| cmd.enable = !!enable; | |
| cmd.usesnr = !!usesnr; | |
| cmd.P0 = p0; | |
| cmd.P1 = p1; | |
| cmd.P2 = p2; | |
| ret = lbs_cmd_with_response(priv, CMD_802_11_TPC_CFG, &cmd); | |
| return ret; | |
| } | |
| /** | |
| * lbs_set_power_adapt_cfg - Configures the power adaptation settings | |
| * | |
| * @priv: A pointer to &struct lbs_private structure | |
| * @enable: Power adaptation enable | |
| * @p0: Power level for 1, 2, 5.5 and 11 Mbps (dBm). | |
| * @p1: Power level for 6, 9, 12, 18, 22, 24 and 36 Mbps (dBm). | |
| * @p2: Power level for 48 and 54 Mbps (dBm). | |
| * | |
| * returns: 0 on Success | |
| */ | |
| int lbs_set_power_adapt_cfg(struct lbs_private *priv, int enable, int8_t p0, | |
| int8_t p1, int8_t p2) | |
| { | |
| struct cmd_ds_802_11_pa_cfg cmd; | |
| int ret; | |
| memset(&cmd, 0, sizeof(cmd)); | |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
| cmd.action = cpu_to_le16(CMD_ACT_SET); | |
| cmd.enable = !!enable; | |
| cmd.P0 = p0; | |
| cmd.P1 = p1; | |
| cmd.P2 = p2; | |
| ret = lbs_cmd_with_response(priv, CMD_802_11_PA_CFG , &cmd); | |
| return ret; | |
| } | |
| struct cmd_ctrl_node *__lbs_cmd_async(struct lbs_private *priv, | |
| uint16_t command, struct cmd_header *in_cmd, int in_cmd_size, | |
| int (*callback)(struct lbs_private *, unsigned long, struct cmd_header *), | |
| unsigned long callback_arg) | |
| { | |
| struct cmd_ctrl_node *cmdnode; | |
| lbs_deb_enter(LBS_DEB_HOST); | |
| if (priv->surpriseremoved) { | |
| lbs_deb_host("PREP_CMD: card removed\n"); | |
| cmdnode = ERR_PTR(-ENOENT); | |
| goto done; | |
| } | |
| /* No commands are allowed in Deep Sleep until we toggle the GPIO | |
| * to wake up the card and it has signaled that it's ready. | |
| */ | |
| if (!priv->is_auto_deep_sleep_enabled) { | |
| if (priv->is_deep_sleep) { | |
| lbs_deb_cmd("command not allowed in deep sleep\n"); | |
| cmdnode = ERR_PTR(-EBUSY); | |
| goto done; | |
| } | |
| } | |
| cmdnode = lbs_get_free_cmd_node(priv); | |
| if (cmdnode == NULL) { | |
| lbs_deb_host("PREP_CMD: cmdnode is NULL\n"); | |
| /* Wake up main thread to execute next command */ | |
| wake_up(&priv->waitq); | |
| cmdnode = ERR_PTR(-ENOBUFS); | |
| goto done; | |
| } | |
| cmdnode->callback = callback; | |
| cmdnode->callback_arg = callback_arg; | |
| /* Copy the incoming command to the buffer */ | |
| memcpy(cmdnode->cmdbuf, in_cmd, in_cmd_size); | |
| /* Set command, clean result, move to buffer */ | |
| cmdnode->cmdbuf->command = cpu_to_le16(command); | |
| cmdnode->cmdbuf->size = cpu_to_le16(in_cmd_size); | |
| cmdnode->cmdbuf->result = 0; | |
| lbs_deb_host("PREP_CMD: command 0x%04x\n", command); | |
| cmdnode->cmdwaitqwoken = 0; | |
| lbs_queue_cmd(priv, cmdnode); | |
| wake_up(&priv->waitq); | |
| done: | |
| lbs_deb_leave_args(LBS_DEB_HOST, "ret %p", cmdnode); | |
| return cmdnode; | |
| } | |
| void lbs_cmd_async(struct lbs_private *priv, uint16_t command, | |
| struct cmd_header *in_cmd, int in_cmd_size) | |
| { | |
| lbs_deb_enter(LBS_DEB_CMD); | |
| __lbs_cmd_async(priv, command, in_cmd, in_cmd_size, | |
| lbs_cmd_async_callback, 0); | |
| lbs_deb_leave(LBS_DEB_CMD); | |
| } | |
| int __lbs_cmd(struct lbs_private *priv, uint16_t command, | |
| struct cmd_header *in_cmd, int in_cmd_size, | |
| int (*callback)(struct lbs_private *, unsigned long, struct cmd_header *), | |
| unsigned long callback_arg) | |
| { | |
| struct cmd_ctrl_node *cmdnode; | |
| unsigned long flags; | |
| int ret = 0; | |
| lbs_deb_enter(LBS_DEB_HOST); | |
| cmdnode = __lbs_cmd_async(priv, command, in_cmd, in_cmd_size, | |
| callback, callback_arg); | |
| if (IS_ERR(cmdnode)) { | |
| ret = PTR_ERR(cmdnode); | |
| goto done; | |
| } | |
| might_sleep(); | |
| /* | |
| * Be careful with signals here. A signal may be received as the system | |
| * goes into suspend or resume. We do not want this to interrupt the | |
| * command, so we perform an uninterruptible sleep. | |
| */ | |
| wait_event(cmdnode->cmdwait_q, cmdnode->cmdwaitqwoken); | |
| spin_lock_irqsave(&priv->driver_lock, flags); | |
| ret = cmdnode->result; | |
| if (ret) | |
| netdev_info(priv->dev, "PREP_CMD: command 0x%04x failed: %d\n", | |
| command, ret); | |
| __lbs_cleanup_and_insert_cmd(priv, cmdnode); | |
| spin_unlock_irqrestore(&priv->driver_lock, flags); | |
| done: | |
| lbs_deb_leave_args(LBS_DEB_HOST, "ret %d", ret); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(__lbs_cmd); |