| /* | |
| * Marvell Wireless LAN device driver: CFG80211 | |
| * | |
| * Copyright (C) 2011-2014, Marvell International Ltd. | |
| * | |
| * This software file (the "File") is distributed by Marvell International | |
| * Ltd. under the terms of the GNU General Public License Version 2, June 1991 | |
| * (the "License"). You may use, redistribute and/or modify this File in | |
| * accordance with the terms and conditions of the License, a copy of which | |
| * is available by writing to the Free Software Foundation, Inc., | |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the | |
| * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. | |
| * | |
| * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE | |
| * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE | |
| * ARE EXPRESSLY DISCLAIMED. The License provides additional details about | |
| * this warranty disclaimer. | |
| */ | |
| #include "cfg80211.h" | |
| #include "main.h" | |
| #include "11n.h" | |
| #include "wmm.h" | |
| static char *reg_alpha2; | |
| module_param(reg_alpha2, charp, 0); | |
| static const struct ieee80211_iface_limit mwifiex_ap_sta_limits[] = { | |
| { | |
| .max = 3, .types = BIT(NL80211_IFTYPE_STATION) | | |
| BIT(NL80211_IFTYPE_P2P_GO) | | |
| BIT(NL80211_IFTYPE_P2P_CLIENT) | | |
| BIT(NL80211_IFTYPE_AP), | |
| }, | |
| }; | |
| static const struct ieee80211_iface_combination | |
| mwifiex_iface_comb_ap_sta = { | |
| .limits = mwifiex_ap_sta_limits, | |
| .num_different_channels = 1, | |
| .n_limits = ARRAY_SIZE(mwifiex_ap_sta_limits), | |
| .max_interfaces = MWIFIEX_MAX_BSS_NUM, | |
| .beacon_int_infra_match = true, | |
| .radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) | | |
| BIT(NL80211_CHAN_WIDTH_20) | | |
| BIT(NL80211_CHAN_WIDTH_40), | |
| }; | |
| static const struct ieee80211_iface_combination | |
| mwifiex_iface_comb_ap_sta_vht = { | |
| .limits = mwifiex_ap_sta_limits, | |
| .num_different_channels = 1, | |
| .n_limits = ARRAY_SIZE(mwifiex_ap_sta_limits), | |
| .max_interfaces = MWIFIEX_MAX_BSS_NUM, | |
| .beacon_int_infra_match = true, | |
| .radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) | | |
| BIT(NL80211_CHAN_WIDTH_20) | | |
| BIT(NL80211_CHAN_WIDTH_40) | | |
| BIT(NL80211_CHAN_WIDTH_80), | |
| }; | |
| static const struct | |
| ieee80211_iface_combination mwifiex_iface_comb_ap_sta_drcs = { | |
| .limits = mwifiex_ap_sta_limits, | |
| .num_different_channels = 2, | |
| .n_limits = ARRAY_SIZE(mwifiex_ap_sta_limits), | |
| .max_interfaces = MWIFIEX_MAX_BSS_NUM, | |
| .beacon_int_infra_match = true, | |
| }; | |
| /* | |
| * This function maps the nl802.11 channel type into driver channel type. | |
| * | |
| * The mapping is as follows - | |
| * NL80211_CHAN_NO_HT -> IEEE80211_HT_PARAM_CHA_SEC_NONE | |
| * NL80211_CHAN_HT20 -> IEEE80211_HT_PARAM_CHA_SEC_NONE | |
| * NL80211_CHAN_HT40PLUS -> IEEE80211_HT_PARAM_CHA_SEC_ABOVE | |
| * NL80211_CHAN_HT40MINUS -> IEEE80211_HT_PARAM_CHA_SEC_BELOW | |
| * Others -> IEEE80211_HT_PARAM_CHA_SEC_NONE | |
| */ | |
| u8 mwifiex_chan_type_to_sec_chan_offset(enum nl80211_channel_type chan_type) | |
| { | |
| switch (chan_type) { | |
| case NL80211_CHAN_NO_HT: | |
| case NL80211_CHAN_HT20: | |
| return IEEE80211_HT_PARAM_CHA_SEC_NONE; | |
| case NL80211_CHAN_HT40PLUS: | |
| return IEEE80211_HT_PARAM_CHA_SEC_ABOVE; | |
| case NL80211_CHAN_HT40MINUS: | |
| return IEEE80211_HT_PARAM_CHA_SEC_BELOW; | |
| default: | |
| return IEEE80211_HT_PARAM_CHA_SEC_NONE; | |
| } | |
| } | |
| /* This function maps IEEE HT secondary channel type to NL80211 channel type | |
| */ | |
| u8 mwifiex_sec_chan_offset_to_chan_type(u8 second_chan_offset) | |
| { | |
| switch (second_chan_offset) { | |
| case IEEE80211_HT_PARAM_CHA_SEC_NONE: | |
| return NL80211_CHAN_HT20; | |
| case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: | |
| return NL80211_CHAN_HT40PLUS; | |
| case IEEE80211_HT_PARAM_CHA_SEC_BELOW: | |
| return NL80211_CHAN_HT40MINUS; | |
| default: | |
| return NL80211_CHAN_HT20; | |
| } | |
| } | |
| /* | |
| * This function checks whether WEP is set. | |
| */ | |
| static int | |
| mwifiex_is_alg_wep(u32 cipher) | |
| { | |
| switch (cipher) { | |
| case WLAN_CIPHER_SUITE_WEP40: | |
| case WLAN_CIPHER_SUITE_WEP104: | |
| return 1; | |
| default: | |
| break; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * This function retrieves the private structure from kernel wiphy structure. | |
| */ | |
| static void *mwifiex_cfg80211_get_adapter(struct wiphy *wiphy) | |
| { | |
| return (void *) (*(unsigned long *) wiphy_priv(wiphy)); | |
| } | |
| /* | |
| * CFG802.11 operation handler to delete a network key. | |
| */ | |
| static int | |
| mwifiex_cfg80211_del_key(struct wiphy *wiphy, struct net_device *netdev, | |
| u8 key_index, bool pairwise, const u8 *mac_addr) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(netdev); | |
| const u8 bc_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; | |
| const u8 *peer_mac = pairwise ? mac_addr : bc_mac; | |
| if (mwifiex_set_encode(priv, NULL, NULL, 0, key_index, peer_mac, 1)) { | |
| mwifiex_dbg(priv->adapter, ERROR, "deleting the crypto keys\n"); | |
| return -EFAULT; | |
| } | |
| mwifiex_dbg(priv->adapter, INFO, "info: crypto keys deleted\n"); | |
| return 0; | |
| } | |
| /* | |
| * This function forms an skb for management frame. | |
| */ | |
| static int | |
| mwifiex_form_mgmt_frame(struct sk_buff *skb, const u8 *buf, size_t len) | |
| { | |
| u8 addr[ETH_ALEN] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}; | |
| u16 pkt_len; | |
| u32 tx_control = 0, pkt_type = PKT_TYPE_MGMT; | |
| pkt_len = len + ETH_ALEN; | |
| skb_reserve(skb, MWIFIEX_MIN_DATA_HEADER_LEN + | |
| MWIFIEX_MGMT_FRAME_HEADER_SIZE + sizeof(pkt_len)); | |
| memcpy(skb_push(skb, sizeof(pkt_len)), &pkt_len, sizeof(pkt_len)); | |
| memcpy(skb_push(skb, sizeof(tx_control)), | |
| &tx_control, sizeof(tx_control)); | |
| memcpy(skb_push(skb, sizeof(pkt_type)), &pkt_type, sizeof(pkt_type)); | |
| /* Add packet data and address4 */ | |
| memcpy(skb_put(skb, sizeof(struct ieee80211_hdr_3addr)), buf, | |
| sizeof(struct ieee80211_hdr_3addr)); | |
| memcpy(skb_put(skb, ETH_ALEN), addr, ETH_ALEN); | |
| memcpy(skb_put(skb, len - sizeof(struct ieee80211_hdr_3addr)), | |
| buf + sizeof(struct ieee80211_hdr_3addr), | |
| len - sizeof(struct ieee80211_hdr_3addr)); | |
| skb->priority = LOW_PRIO_TID; | |
| __net_timestamp(skb); | |
| return 0; | |
| } | |
| /* | |
| * CFG802.11 operation handler to transmit a management frame. | |
| */ | |
| static int | |
| mwifiex_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, | |
| struct cfg80211_mgmt_tx_params *params, u64 *cookie) | |
| { | |
| const u8 *buf = params->buf; | |
| size_t len = params->len; | |
| struct sk_buff *skb; | |
| u16 pkt_len; | |
| const struct ieee80211_mgmt *mgmt; | |
| struct mwifiex_txinfo *tx_info; | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(wdev->netdev); | |
| if (!buf || !len) { | |
| mwifiex_dbg(priv->adapter, ERROR, "invalid buffer and length\n"); | |
| return -EFAULT; | |
| } | |
| mgmt = (const struct ieee80211_mgmt *)buf; | |
| if (GET_BSS_ROLE(priv) != MWIFIEX_BSS_ROLE_STA && | |
| ieee80211_is_probe_resp(mgmt->frame_control)) { | |
| /* Since we support offload probe resp, we need to skip probe | |
| * resp in AP or GO mode */ | |
| mwifiex_dbg(priv->adapter, INFO, | |
| "info: skip to send probe resp in AP or GO mode\n"); | |
| return 0; | |
| } | |
| pkt_len = len + ETH_ALEN; | |
| skb = dev_alloc_skb(MWIFIEX_MIN_DATA_HEADER_LEN + | |
| MWIFIEX_MGMT_FRAME_HEADER_SIZE + | |
| pkt_len + sizeof(pkt_len)); | |
| if (!skb) { | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "allocate skb failed for management frame\n"); | |
| return -ENOMEM; | |
| } | |
| tx_info = MWIFIEX_SKB_TXCB(skb); | |
| memset(tx_info, 0, sizeof(*tx_info)); | |
| tx_info->bss_num = priv->bss_num; | |
| tx_info->bss_type = priv->bss_type; | |
| tx_info->pkt_len = pkt_len; | |
| mwifiex_form_mgmt_frame(skb, buf, len); | |
| *cookie = prandom_u32() | 1; | |
| if (ieee80211_is_action(mgmt->frame_control)) | |
| skb = mwifiex_clone_skb_for_tx_status(priv, | |
| skb, | |
| MWIFIEX_BUF_FLAG_ACTION_TX_STATUS, cookie); | |
| else | |
| cfg80211_mgmt_tx_status(wdev, *cookie, buf, len, true, | |
| GFP_ATOMIC); | |
| mwifiex_queue_tx_pkt(priv, skb); | |
| mwifiex_dbg(priv->adapter, INFO, "info: management frame transmitted\n"); | |
| return 0; | |
| } | |
| /* | |
| * CFG802.11 operation handler to register a mgmt frame. | |
| */ | |
| static void | |
| mwifiex_cfg80211_mgmt_frame_register(struct wiphy *wiphy, | |
| struct wireless_dev *wdev, | |
| u16 frame_type, bool reg) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(wdev->netdev); | |
| u32 mask; | |
| if (reg) | |
| mask = priv->mgmt_frame_mask | BIT(frame_type >> 4); | |
| else | |
| mask = priv->mgmt_frame_mask & ~BIT(frame_type >> 4); | |
| if (mask != priv->mgmt_frame_mask) { | |
| priv->mgmt_frame_mask = mask; | |
| mwifiex_send_cmd(priv, HostCmd_CMD_MGMT_FRAME_REG, | |
| HostCmd_ACT_GEN_SET, 0, | |
| &priv->mgmt_frame_mask, false); | |
| mwifiex_dbg(priv->adapter, INFO, "info: mgmt frame registered\n"); | |
| } | |
| } | |
| /* | |
| * CFG802.11 operation handler to remain on channel. | |
| */ | |
| static int | |
| mwifiex_cfg80211_remain_on_channel(struct wiphy *wiphy, | |
| struct wireless_dev *wdev, | |
| struct ieee80211_channel *chan, | |
| unsigned int duration, u64 *cookie) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(wdev->netdev); | |
| int ret; | |
| if (!chan || !cookie) { | |
| mwifiex_dbg(priv->adapter, ERROR, "Invalid parameter for ROC\n"); | |
| return -EINVAL; | |
| } | |
| if (priv->roc_cfg.cookie) { | |
| mwifiex_dbg(priv->adapter, INFO, | |
| "info: ongoing ROC, cookie = 0x%llx\n", | |
| priv->roc_cfg.cookie); | |
| return -EBUSY; | |
| } | |
| ret = mwifiex_remain_on_chan_cfg(priv, HostCmd_ACT_GEN_SET, chan, | |
| duration); | |
| if (!ret) { | |
| *cookie = prandom_u32() | 1; | |
| priv->roc_cfg.cookie = *cookie; | |
| priv->roc_cfg.chan = *chan; | |
| cfg80211_ready_on_channel(wdev, *cookie, chan, | |
| duration, GFP_ATOMIC); | |
| mwifiex_dbg(priv->adapter, INFO, | |
| "info: ROC, cookie = 0x%llx\n", *cookie); | |
| } | |
| return ret; | |
| } | |
| /* | |
| * CFG802.11 operation handler to cancel remain on channel. | |
| */ | |
| static int | |
| mwifiex_cfg80211_cancel_remain_on_channel(struct wiphy *wiphy, | |
| struct wireless_dev *wdev, u64 cookie) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(wdev->netdev); | |
| int ret; | |
| if (cookie != priv->roc_cfg.cookie) | |
| return -ENOENT; | |
| ret = mwifiex_remain_on_chan_cfg(priv, HostCmd_ACT_GEN_REMOVE, | |
| &priv->roc_cfg.chan, 0); | |
| if (!ret) { | |
| cfg80211_remain_on_channel_expired(wdev, cookie, | |
| &priv->roc_cfg.chan, | |
| GFP_ATOMIC); | |
| memset(&priv->roc_cfg, 0, sizeof(struct mwifiex_roc_cfg)); | |
| mwifiex_dbg(priv->adapter, INFO, | |
| "info: cancel ROC, cookie = 0x%llx\n", cookie); | |
| } | |
| return ret; | |
| } | |
| /* | |
| * CFG802.11 operation handler to set Tx power. | |
| */ | |
| static int | |
| mwifiex_cfg80211_set_tx_power(struct wiphy *wiphy, | |
| struct wireless_dev *wdev, | |
| enum nl80211_tx_power_setting type, | |
| int mbm) | |
| { | |
| struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy); | |
| struct mwifiex_private *priv; | |
| struct mwifiex_power_cfg power_cfg; | |
| int dbm = MBM_TO_DBM(mbm); | |
| if (type == NL80211_TX_POWER_FIXED) { | |
| power_cfg.is_power_auto = 0; | |
| power_cfg.power_level = dbm; | |
| } else { | |
| power_cfg.is_power_auto = 1; | |
| } | |
| priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY); | |
| return mwifiex_set_tx_power(priv, &power_cfg); | |
| } | |
| /* | |
| * CFG802.11 operation handler to get Tx power. | |
| */ | |
| static int | |
| mwifiex_cfg80211_get_tx_power(struct wiphy *wiphy, | |
| struct wireless_dev *wdev, | |
| int *dbm) | |
| { | |
| struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy); | |
| struct mwifiex_private *priv = mwifiex_get_priv(adapter, | |
| MWIFIEX_BSS_ROLE_ANY); | |
| int ret = mwifiex_send_cmd(priv, HostCmd_CMD_RF_TX_PWR, | |
| HostCmd_ACT_GEN_GET, 0, NULL, true); | |
| if (ret < 0) | |
| return ret; | |
| /* tx_power_level is set in HostCmd_CMD_RF_TX_PWR command handler */ | |
| *dbm = priv->tx_power_level; | |
| return 0; | |
| } | |
| /* | |
| * CFG802.11 operation handler to set Power Save option. | |
| * | |
| * The timeout value, if provided, is currently ignored. | |
| */ | |
| static int | |
| mwifiex_cfg80211_set_power_mgmt(struct wiphy *wiphy, | |
| struct net_device *dev, | |
| bool enabled, int timeout) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| u32 ps_mode; | |
| if (timeout) | |
| mwifiex_dbg(priv->adapter, INFO, | |
| "info: ignore timeout value for IEEE Power Save\n"); | |
| ps_mode = enabled; | |
| return mwifiex_drv_set_power(priv, &ps_mode); | |
| } | |
| /* | |
| * CFG802.11 operation handler to set the default network key. | |
| */ | |
| static int | |
| mwifiex_cfg80211_set_default_key(struct wiphy *wiphy, struct net_device *netdev, | |
| u8 key_index, bool unicast, | |
| bool multicast) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(netdev); | |
| /* Return if WEP key not configured */ | |
| if (!priv->sec_info.wep_enabled) | |
| return 0; | |
| if (priv->bss_type == MWIFIEX_BSS_TYPE_UAP) { | |
| priv->wep_key_curr_index = key_index; | |
| } else if (mwifiex_set_encode(priv, NULL, NULL, 0, key_index, | |
| NULL, 0)) { | |
| mwifiex_dbg(priv->adapter, ERROR, "set default Tx key index\n"); | |
| return -EFAULT; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * CFG802.11 operation handler to add a network key. | |
| */ | |
| static int | |
| mwifiex_cfg80211_add_key(struct wiphy *wiphy, struct net_device *netdev, | |
| u8 key_index, bool pairwise, const u8 *mac_addr, | |
| struct key_params *params) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(netdev); | |
| struct mwifiex_wep_key *wep_key; | |
| const u8 bc_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; | |
| const u8 *peer_mac = pairwise ? mac_addr : bc_mac; | |
| if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_UAP && | |
| (params->cipher == WLAN_CIPHER_SUITE_WEP40 || | |
| params->cipher == WLAN_CIPHER_SUITE_WEP104)) { | |
| if (params->key && params->key_len) { | |
| wep_key = &priv->wep_key[key_index]; | |
| memset(wep_key, 0, sizeof(struct mwifiex_wep_key)); | |
| memcpy(wep_key->key_material, params->key, | |
| params->key_len); | |
| wep_key->key_index = key_index; | |
| wep_key->key_length = params->key_len; | |
| priv->sec_info.wep_enabled = 1; | |
| } | |
| return 0; | |
| } | |
| if (mwifiex_set_encode(priv, params, params->key, params->key_len, | |
| key_index, peer_mac, 0)) { | |
| mwifiex_dbg(priv->adapter, ERROR, "crypto keys added\n"); | |
| return -EFAULT; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * CFG802.11 operation handler to set default mgmt key. | |
| */ | |
| static int | |
| mwifiex_cfg80211_set_default_mgmt_key(struct wiphy *wiphy, | |
| struct net_device *netdev, | |
| u8 key_index) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(netdev); | |
| struct mwifiex_ds_encrypt_key encrypt_key; | |
| wiphy_dbg(wiphy, "set default mgmt key, key index=%d\n", key_index); | |
| memset(&encrypt_key, 0, sizeof(struct mwifiex_ds_encrypt_key)); | |
| encrypt_key.key_len = WLAN_KEY_LEN_CCMP; | |
| encrypt_key.key_index = key_index; | |
| encrypt_key.is_igtk_def_key = true; | |
| eth_broadcast_addr(encrypt_key.mac_addr); | |
| return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL, | |
| HostCmd_ACT_GEN_SET, true, &encrypt_key, true); | |
| } | |
| /* | |
| * This function sends domain information to the firmware. | |
| * | |
| * The following information are passed to the firmware - | |
| * - Country codes | |
| * - Sub bands (first channel, number of channels, maximum Tx power) | |
| */ | |
| int mwifiex_send_domain_info_cmd_fw(struct wiphy *wiphy) | |
| { | |
| u8 no_of_triplet = 0; | |
| struct ieee80211_country_ie_triplet *t; | |
| u8 no_of_parsed_chan = 0; | |
| u8 first_chan = 0, next_chan = 0, max_pwr = 0; | |
| u8 i, flag = 0; | |
| enum nl80211_band band; | |
| struct ieee80211_supported_band *sband; | |
| struct ieee80211_channel *ch; | |
| struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy); | |
| struct mwifiex_private *priv; | |
| struct mwifiex_802_11d_domain_reg *domain_info = &adapter->domain_reg; | |
| /* Set country code */ | |
| domain_info->country_code[0] = adapter->country_code[0]; | |
| domain_info->country_code[1] = adapter->country_code[1]; | |
| domain_info->country_code[2] = ' '; | |
| band = mwifiex_band_to_radio_type(adapter->config_bands); | |
| if (!wiphy->bands[band]) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "11D: setting domain info in FW\n"); | |
| return -1; | |
| } | |
| sband = wiphy->bands[band]; | |
| for (i = 0; i < sband->n_channels ; i++) { | |
| ch = &sband->channels[i]; | |
| if (ch->flags & IEEE80211_CHAN_DISABLED) | |
| continue; | |
| if (!flag) { | |
| flag = 1; | |
| first_chan = (u32) ch->hw_value; | |
| next_chan = first_chan; | |
| max_pwr = ch->max_power; | |
| no_of_parsed_chan = 1; | |
| continue; | |
| } | |
| if (ch->hw_value == next_chan + 1 && | |
| ch->max_power == max_pwr) { | |
| next_chan++; | |
| no_of_parsed_chan++; | |
| } else { | |
| t = &domain_info->triplet[no_of_triplet]; | |
| t->chans.first_channel = first_chan; | |
| t->chans.num_channels = no_of_parsed_chan; | |
| t->chans.max_power = max_pwr; | |
| no_of_triplet++; | |
| first_chan = (u32) ch->hw_value; | |
| next_chan = first_chan; | |
| max_pwr = ch->max_power; | |
| no_of_parsed_chan = 1; | |
| } | |
| } | |
| if (flag) { | |
| t = &domain_info->triplet[no_of_triplet]; | |
| t->chans.first_channel = first_chan; | |
| t->chans.num_channels = no_of_parsed_chan; | |
| t->chans.max_power = max_pwr; | |
| no_of_triplet++; | |
| } | |
| domain_info->no_of_triplet = no_of_triplet; | |
| priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY); | |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_802_11D_DOMAIN_INFO, | |
| HostCmd_ACT_GEN_SET, 0, NULL, false)) { | |
| mwifiex_dbg(adapter, INFO, | |
| "11D: setting domain info in FW\n"); | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * CFG802.11 regulatory domain callback function. | |
| * | |
| * This function is called when the regulatory domain is changed due to the | |
| * following reasons - | |
| * - Set by driver | |
| * - Set by system core | |
| * - Set by user | |
| * - Set bt Country IE | |
| */ | |
| static void mwifiex_reg_notifier(struct wiphy *wiphy, | |
| struct regulatory_request *request) | |
| { | |
| struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy); | |
| struct mwifiex_private *priv = mwifiex_get_priv(adapter, | |
| MWIFIEX_BSS_ROLE_ANY); | |
| mwifiex_dbg(adapter, INFO, | |
| "info: cfg80211 regulatory domain callback for %c%c\n", | |
| request->alpha2[0], request->alpha2[1]); | |
| switch (request->initiator) { | |
| case NL80211_REGDOM_SET_BY_DRIVER: | |
| case NL80211_REGDOM_SET_BY_CORE: | |
| case NL80211_REGDOM_SET_BY_USER: | |
| case NL80211_REGDOM_SET_BY_COUNTRY_IE: | |
| break; | |
| default: | |
| mwifiex_dbg(adapter, ERROR, | |
| "unknown regdom initiator: %d\n", | |
| request->initiator); | |
| return; | |
| } | |
| /* Don't send world or same regdom info to firmware */ | |
| if (strncmp(request->alpha2, "00", 2) && | |
| strncmp(request->alpha2, adapter->country_code, | |
| sizeof(request->alpha2))) { | |
| memcpy(adapter->country_code, request->alpha2, | |
| sizeof(request->alpha2)); | |
| mwifiex_send_domain_info_cmd_fw(wiphy); | |
| mwifiex_dnld_txpwr_table(priv); | |
| } | |
| } | |
| /* | |
| * This function sets the fragmentation threshold. | |
| * | |
| * The fragmentation threshold value must lie between MWIFIEX_FRAG_MIN_VALUE | |
| * and MWIFIEX_FRAG_MAX_VALUE. | |
| */ | |
| static int | |
| mwifiex_set_frag(struct mwifiex_private *priv, u32 frag_thr) | |
| { | |
| if (frag_thr < MWIFIEX_FRAG_MIN_VALUE || | |
| frag_thr > MWIFIEX_FRAG_MAX_VALUE) | |
| frag_thr = MWIFIEX_FRAG_MAX_VALUE; | |
| return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_SNMP_MIB, | |
| HostCmd_ACT_GEN_SET, FRAG_THRESH_I, | |
| &frag_thr, true); | |
| } | |
| /* | |
| * This function sets the RTS threshold. | |
| * The rts value must lie between MWIFIEX_RTS_MIN_VALUE | |
| * and MWIFIEX_RTS_MAX_VALUE. | |
| */ | |
| static int | |
| mwifiex_set_rts(struct mwifiex_private *priv, u32 rts_thr) | |
| { | |
| if (rts_thr < MWIFIEX_RTS_MIN_VALUE || rts_thr > MWIFIEX_RTS_MAX_VALUE) | |
| rts_thr = MWIFIEX_RTS_MAX_VALUE; | |
| return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_SNMP_MIB, | |
| HostCmd_ACT_GEN_SET, RTS_THRESH_I, | |
| &rts_thr, true); | |
| } | |
| /* | |
| * CFG802.11 operation handler to set wiphy parameters. | |
| * | |
| * This function can be used to set the RTS threshold and the | |
| * Fragmentation threshold of the driver. | |
| */ | |
| static int | |
| mwifiex_cfg80211_set_wiphy_params(struct wiphy *wiphy, u32 changed) | |
| { | |
| struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy); | |
| struct mwifiex_private *priv; | |
| struct mwifiex_uap_bss_param *bss_cfg; | |
| int ret; | |
| priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY); | |
| switch (priv->bss_role) { | |
| case MWIFIEX_BSS_ROLE_UAP: | |
| if (priv->bss_started) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "cannot change wiphy params when bss started"); | |
| return -EINVAL; | |
| } | |
| bss_cfg = kzalloc(sizeof(*bss_cfg), GFP_KERNEL); | |
| if (!bss_cfg) | |
| return -ENOMEM; | |
| mwifiex_set_sys_config_invalid_data(bss_cfg); | |
| if (changed & WIPHY_PARAM_RTS_THRESHOLD) | |
| bss_cfg->rts_threshold = wiphy->rts_threshold; | |
| if (changed & WIPHY_PARAM_FRAG_THRESHOLD) | |
| bss_cfg->frag_threshold = wiphy->frag_threshold; | |
| if (changed & WIPHY_PARAM_RETRY_LONG) | |
| bss_cfg->retry_limit = wiphy->retry_long; | |
| ret = mwifiex_send_cmd(priv, HostCmd_CMD_UAP_SYS_CONFIG, | |
| HostCmd_ACT_GEN_SET, | |
| UAP_BSS_PARAMS_I, bss_cfg, | |
| false); | |
| kfree(bss_cfg); | |
| if (ret) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "Failed to set wiphy phy params\n"); | |
| return ret; | |
| } | |
| break; | |
| case MWIFIEX_BSS_ROLE_STA: | |
| if (priv->media_connected) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "cannot change wiphy params when connected"); | |
| return -EINVAL; | |
| } | |
| if (changed & WIPHY_PARAM_RTS_THRESHOLD) { | |
| ret = mwifiex_set_rts(priv, | |
| wiphy->rts_threshold); | |
| if (ret) | |
| return ret; | |
| } | |
| if (changed & WIPHY_PARAM_FRAG_THRESHOLD) { | |
| ret = mwifiex_set_frag(priv, | |
| wiphy->frag_threshold); | |
| if (ret) | |
| return ret; | |
| } | |
| break; | |
| } | |
| return 0; | |
| } | |
| static int | |
| mwifiex_cfg80211_deinit_p2p(struct mwifiex_private *priv) | |
| { | |
| u16 mode = P2P_MODE_DISABLE; | |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_P2P_MODE_CFG, | |
| HostCmd_ACT_GEN_SET, 0, &mode, true)) | |
| return -1; | |
| return 0; | |
| } | |
| /* | |
| * This function initializes the functionalities for P2P client. | |
| * The P2P client initialization sequence is: | |
| * disable -> device -> client | |
| */ | |
| static int | |
| mwifiex_cfg80211_init_p2p_client(struct mwifiex_private *priv) | |
| { | |
| u16 mode; | |
| if (mwifiex_cfg80211_deinit_p2p(priv)) | |
| return -1; | |
| mode = P2P_MODE_DEVICE; | |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_P2P_MODE_CFG, | |
| HostCmd_ACT_GEN_SET, 0, &mode, true)) | |
| return -1; | |
| mode = P2P_MODE_CLIENT; | |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_P2P_MODE_CFG, | |
| HostCmd_ACT_GEN_SET, 0, &mode, true)) | |
| return -1; | |
| return 0; | |
| } | |
| /* | |
| * This function initializes the functionalities for P2P GO. | |
| * The P2P GO initialization sequence is: | |
| * disable -> device -> GO | |
| */ | |
| static int | |
| mwifiex_cfg80211_init_p2p_go(struct mwifiex_private *priv) | |
| { | |
| u16 mode; | |
| if (mwifiex_cfg80211_deinit_p2p(priv)) | |
| return -1; | |
| mode = P2P_MODE_DEVICE; | |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_P2P_MODE_CFG, | |
| HostCmd_ACT_GEN_SET, 0, &mode, true)) | |
| return -1; | |
| mode = P2P_MODE_GO; | |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_P2P_MODE_CFG, | |
| HostCmd_ACT_GEN_SET, 0, &mode, true)) | |
| return -1; | |
| return 0; | |
| } | |
| static int mwifiex_deinit_priv_params(struct mwifiex_private *priv) | |
| { | |
| struct mwifiex_adapter *adapter = priv->adapter; | |
| unsigned long flags; | |
| priv->mgmt_frame_mask = 0; | |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_MGMT_FRAME_REG, | |
| HostCmd_ACT_GEN_SET, 0, | |
| &priv->mgmt_frame_mask, false)) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "could not unregister mgmt frame rx\n"); | |
| return -1; | |
| } | |
| mwifiex_deauthenticate(priv, NULL); | |
| spin_lock_irqsave(&adapter->main_proc_lock, flags); | |
| adapter->main_locked = true; | |
| if (adapter->mwifiex_processing) { | |
| spin_unlock_irqrestore(&adapter->main_proc_lock, flags); | |
| flush_workqueue(adapter->workqueue); | |
| } else { | |
| spin_unlock_irqrestore(&adapter->main_proc_lock, flags); | |
| } | |
| spin_lock_irqsave(&adapter->rx_proc_lock, flags); | |
| adapter->rx_locked = true; | |
| if (adapter->rx_processing) { | |
| spin_unlock_irqrestore(&adapter->rx_proc_lock, flags); | |
| flush_workqueue(adapter->rx_workqueue); | |
| } else { | |
| spin_unlock_irqrestore(&adapter->rx_proc_lock, flags); | |
| } | |
| mwifiex_free_priv(priv); | |
| priv->wdev.iftype = NL80211_IFTYPE_UNSPECIFIED; | |
| priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED; | |
| priv->sec_info.authentication_mode = NL80211_AUTHTYPE_OPEN_SYSTEM; | |
| return 0; | |
| } | |
| static int | |
| mwifiex_init_new_priv_params(struct mwifiex_private *priv, | |
| struct net_device *dev, | |
| enum nl80211_iftype type) | |
| { | |
| struct mwifiex_adapter *adapter = priv->adapter; | |
| unsigned long flags; | |
| mwifiex_init_priv(priv); | |
| priv->bss_mode = type; | |
| priv->wdev.iftype = type; | |
| mwifiex_init_priv_params(priv, priv->netdev); | |
| priv->bss_started = 0; | |
| switch (type) { | |
| case NL80211_IFTYPE_STATION: | |
| case NL80211_IFTYPE_ADHOC: | |
| priv->bss_num = mwifiex_get_unused_bss_num(adapter, | |
| MWIFIEX_BSS_TYPE_STA); | |
| priv->bss_role = MWIFIEX_BSS_ROLE_STA; | |
| priv->bss_type = MWIFIEX_BSS_TYPE_STA; | |
| break; | |
| case NL80211_IFTYPE_P2P_CLIENT: | |
| priv->bss_num = mwifiex_get_unused_bss_num(adapter, | |
| MWIFIEX_BSS_TYPE_P2P); | |
| priv->bss_role = MWIFIEX_BSS_ROLE_STA; | |
| priv->bss_type = MWIFIEX_BSS_TYPE_P2P; | |
| break; | |
| case NL80211_IFTYPE_P2P_GO: | |
| priv->bss_num = mwifiex_get_unused_bss_num(adapter, | |
| MWIFIEX_BSS_TYPE_P2P); | |
| priv->bss_role = MWIFIEX_BSS_ROLE_UAP; | |
| priv->bss_type = MWIFIEX_BSS_TYPE_P2P; | |
| break; | |
| case NL80211_IFTYPE_AP: | |
| priv->bss_num = mwifiex_get_unused_bss_num(adapter, | |
| MWIFIEX_BSS_TYPE_UAP); | |
| priv->bss_type = MWIFIEX_BSS_TYPE_UAP; | |
| priv->bss_role = MWIFIEX_BSS_ROLE_UAP; | |
| break; | |
| default: | |
| mwifiex_dbg(adapter, ERROR, | |
| "%s: changing to %d not supported\n", | |
| dev->name, type); | |
| return -EOPNOTSUPP; | |
| } | |
| spin_lock_irqsave(&adapter->main_proc_lock, flags); | |
| adapter->main_locked = false; | |
| spin_unlock_irqrestore(&adapter->main_proc_lock, flags); | |
| spin_lock_irqsave(&adapter->rx_proc_lock, flags); | |
| adapter->rx_locked = false; | |
| spin_unlock_irqrestore(&adapter->rx_proc_lock, flags); | |
| return 0; | |
| } | |
| static int | |
| mwifiex_change_vif_to_p2p(struct net_device *dev, | |
| enum nl80211_iftype curr_iftype, | |
| enum nl80211_iftype type, u32 *flags, | |
| struct vif_params *params) | |
| { | |
| struct mwifiex_private *priv; | |
| struct mwifiex_adapter *adapter; | |
| priv = mwifiex_netdev_get_priv(dev); | |
| if (!priv) | |
| return -1; | |
| adapter = priv->adapter; | |
| if (adapter->curr_iface_comb.p2p_intf == | |
| adapter->iface_limit.p2p_intf) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "cannot create multiple P2P ifaces\n"); | |
| return -1; | |
| } | |
| mwifiex_dbg(adapter, INFO, | |
| "%s: changing role to p2p\n", dev->name); | |
| if (mwifiex_deinit_priv_params(priv)) | |
| return -1; | |
| if (mwifiex_init_new_priv_params(priv, dev, type)) | |
| return -1; | |
| switch (type) { | |
| case NL80211_IFTYPE_P2P_CLIENT: | |
| if (mwifiex_cfg80211_init_p2p_client(priv)) | |
| return -EFAULT; | |
| break; | |
| case NL80211_IFTYPE_P2P_GO: | |
| if (mwifiex_cfg80211_init_p2p_go(priv)) | |
| return -EFAULT; | |
| break; | |
| default: | |
| mwifiex_dbg(adapter, ERROR, | |
| "%s: changing to %d not supported\n", | |
| dev->name, type); | |
| return -EOPNOTSUPP; | |
| } | |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_SET_BSS_MODE, | |
| HostCmd_ACT_GEN_SET, 0, NULL, true)) | |
| return -1; | |
| if (mwifiex_sta_init_cmd(priv, false, false)) | |
| return -1; | |
| switch (curr_iftype) { | |
| case NL80211_IFTYPE_STATION: | |
| case NL80211_IFTYPE_ADHOC: | |
| adapter->curr_iface_comb.sta_intf--; | |
| break; | |
| case NL80211_IFTYPE_AP: | |
| adapter->curr_iface_comb.uap_intf--; | |
| break; | |
| default: | |
| break; | |
| } | |
| adapter->curr_iface_comb.p2p_intf++; | |
| dev->ieee80211_ptr->iftype = type; | |
| return 0; | |
| } | |
| static int | |
| mwifiex_change_vif_to_sta_adhoc(struct net_device *dev, | |
| enum nl80211_iftype curr_iftype, | |
| enum nl80211_iftype type, u32 *flags, | |
| struct vif_params *params) | |
| { | |
| struct mwifiex_private *priv; | |
| struct mwifiex_adapter *adapter; | |
| priv = mwifiex_netdev_get_priv(dev); | |
| if (!priv) | |
| return -1; | |
| adapter = priv->adapter; | |
| if ((curr_iftype != NL80211_IFTYPE_P2P_CLIENT && | |
| curr_iftype != NL80211_IFTYPE_P2P_GO) && | |
| (adapter->curr_iface_comb.sta_intf == | |
| adapter->iface_limit.sta_intf)) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "cannot create multiple station/adhoc ifaces\n"); | |
| return -1; | |
| } | |
| if (type == NL80211_IFTYPE_STATION) | |
| mwifiex_dbg(adapter, INFO, | |
| "%s: changing role to station\n", dev->name); | |
| else | |
| mwifiex_dbg(adapter, INFO, | |
| "%s: changing role to adhoc\n", dev->name); | |
| if (mwifiex_deinit_priv_params(priv)) | |
| return -1; | |
| if (mwifiex_init_new_priv_params(priv, dev, type)) | |
| return -1; | |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_SET_BSS_MODE, | |
| HostCmd_ACT_GEN_SET, 0, NULL, true)) | |
| return -1; | |
| if (mwifiex_sta_init_cmd(priv, false, false)) | |
| return -1; | |
| switch (curr_iftype) { | |
| case NL80211_IFTYPE_P2P_CLIENT: | |
| case NL80211_IFTYPE_P2P_GO: | |
| adapter->curr_iface_comb.p2p_intf--; | |
| break; | |
| case NL80211_IFTYPE_AP: | |
| adapter->curr_iface_comb.uap_intf--; | |
| break; | |
| default: | |
| break; | |
| } | |
| adapter->curr_iface_comb.sta_intf++; | |
| dev->ieee80211_ptr->iftype = type; | |
| return 0; | |
| } | |
| static int | |
| mwifiex_change_vif_to_ap(struct net_device *dev, | |
| enum nl80211_iftype curr_iftype, | |
| enum nl80211_iftype type, u32 *flags, | |
| struct vif_params *params) | |
| { | |
| struct mwifiex_private *priv; | |
| struct mwifiex_adapter *adapter; | |
| priv = mwifiex_netdev_get_priv(dev); | |
| if (!priv) | |
| return -1; | |
| adapter = priv->adapter; | |
| if (adapter->curr_iface_comb.uap_intf == | |
| adapter->iface_limit.uap_intf) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "cannot create multiple AP ifaces\n"); | |
| return -1; | |
| } | |
| mwifiex_dbg(adapter, INFO, | |
| "%s: changing role to AP\n", dev->name); | |
| if (mwifiex_deinit_priv_params(priv)) | |
| return -1; | |
| if (mwifiex_init_new_priv_params(priv, dev, type)) | |
| return -1; | |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_SET_BSS_MODE, | |
| HostCmd_ACT_GEN_SET, 0, NULL, true)) | |
| return -1; | |
| if (mwifiex_sta_init_cmd(priv, false, false)) | |
| return -1; | |
| switch (curr_iftype) { | |
| case NL80211_IFTYPE_P2P_CLIENT: | |
| case NL80211_IFTYPE_P2P_GO: | |
| adapter->curr_iface_comb.p2p_intf--; | |
| break; | |
| case NL80211_IFTYPE_STATION: | |
| case NL80211_IFTYPE_ADHOC: | |
| adapter->curr_iface_comb.sta_intf--; | |
| break; | |
| default: | |
| break; | |
| } | |
| adapter->curr_iface_comb.uap_intf++; | |
| dev->ieee80211_ptr->iftype = type; | |
| return 0; | |
| } | |
| /* | |
| * CFG802.11 operation handler to change interface type. | |
| */ | |
| static int | |
| mwifiex_cfg80211_change_virtual_intf(struct wiphy *wiphy, | |
| struct net_device *dev, | |
| enum nl80211_iftype type, u32 *flags, | |
| struct vif_params *params) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| enum nl80211_iftype curr_iftype = dev->ieee80211_ptr->iftype; | |
| switch (curr_iftype) { | |
| case NL80211_IFTYPE_ADHOC: | |
| switch (type) { | |
| case NL80211_IFTYPE_STATION: | |
| priv->bss_mode = type; | |
| priv->sec_info.authentication_mode = | |
| NL80211_AUTHTYPE_OPEN_SYSTEM; | |
| dev->ieee80211_ptr->iftype = type; | |
| mwifiex_deauthenticate(priv, NULL); | |
| return mwifiex_send_cmd(priv, HostCmd_CMD_SET_BSS_MODE, | |
| HostCmd_ACT_GEN_SET, 0, NULL, | |
| true); | |
| case NL80211_IFTYPE_P2P_CLIENT: | |
| case NL80211_IFTYPE_P2P_GO: | |
| return mwifiex_change_vif_to_p2p(dev, curr_iftype, | |
| type, flags, params); | |
| case NL80211_IFTYPE_AP: | |
| return mwifiex_change_vif_to_ap(dev, curr_iftype, type, | |
| flags, params); | |
| case NL80211_IFTYPE_UNSPECIFIED: | |
| mwifiex_dbg(priv->adapter, INFO, | |
| "%s: kept type as IBSS\n", dev->name); | |
| case NL80211_IFTYPE_ADHOC: /* This shouldn't happen */ | |
| return 0; | |
| default: | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "%s: changing to %d not supported\n", | |
| dev->name, type); | |
| return -EOPNOTSUPP; | |
| } | |
| break; | |
| case NL80211_IFTYPE_STATION: | |
| switch (type) { | |
| case NL80211_IFTYPE_ADHOC: | |
| priv->bss_mode = type; | |
| priv->sec_info.authentication_mode = | |
| NL80211_AUTHTYPE_OPEN_SYSTEM; | |
| dev->ieee80211_ptr->iftype = type; | |
| mwifiex_deauthenticate(priv, NULL); | |
| return mwifiex_send_cmd(priv, HostCmd_CMD_SET_BSS_MODE, | |
| HostCmd_ACT_GEN_SET, 0, NULL, | |
| true); | |
| case NL80211_IFTYPE_P2P_CLIENT: | |
| case NL80211_IFTYPE_P2P_GO: | |
| return mwifiex_change_vif_to_p2p(dev, curr_iftype, | |
| type, flags, params); | |
| case NL80211_IFTYPE_AP: | |
| return mwifiex_change_vif_to_ap(dev, curr_iftype, type, | |
| flags, params); | |
| case NL80211_IFTYPE_UNSPECIFIED: | |
| mwifiex_dbg(priv->adapter, INFO, | |
| "%s: kept type as STA\n", dev->name); | |
| case NL80211_IFTYPE_STATION: /* This shouldn't happen */ | |
| return 0; | |
| default: | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "%s: changing to %d not supported\n", | |
| dev->name, type); | |
| return -EOPNOTSUPP; | |
| } | |
| break; | |
| case NL80211_IFTYPE_AP: | |
| switch (type) { | |
| case NL80211_IFTYPE_ADHOC: | |
| case NL80211_IFTYPE_STATION: | |
| return mwifiex_change_vif_to_sta_adhoc(dev, curr_iftype, | |
| type, flags, | |
| params); | |
| break; | |
| case NL80211_IFTYPE_P2P_CLIENT: | |
| case NL80211_IFTYPE_P2P_GO: | |
| return mwifiex_change_vif_to_p2p(dev, curr_iftype, | |
| type, flags, params); | |
| case NL80211_IFTYPE_UNSPECIFIED: | |
| mwifiex_dbg(priv->adapter, INFO, | |
| "%s: kept type as AP\n", dev->name); | |
| case NL80211_IFTYPE_AP: /* This shouldn't happen */ | |
| return 0; | |
| default: | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "%s: changing to %d not supported\n", | |
| dev->name, type); | |
| return -EOPNOTSUPP; | |
| } | |
| break; | |
| case NL80211_IFTYPE_P2P_CLIENT: | |
| case NL80211_IFTYPE_P2P_GO: | |
| switch (type) { | |
| case NL80211_IFTYPE_STATION: | |
| if (mwifiex_cfg80211_deinit_p2p(priv)) | |
| return -EFAULT; | |
| priv->adapter->curr_iface_comb.p2p_intf--; | |
| priv->adapter->curr_iface_comb.sta_intf++; | |
| dev->ieee80211_ptr->iftype = type; | |
| break; | |
| case NL80211_IFTYPE_ADHOC: | |
| if (mwifiex_cfg80211_deinit_p2p(priv)) | |
| return -EFAULT; | |
| return mwifiex_change_vif_to_sta_adhoc(dev, curr_iftype, | |
| type, flags, | |
| params); | |
| break; | |
| case NL80211_IFTYPE_AP: | |
| if (mwifiex_cfg80211_deinit_p2p(priv)) | |
| return -EFAULT; | |
| return mwifiex_change_vif_to_ap(dev, curr_iftype, type, | |
| flags, params); | |
| case NL80211_IFTYPE_UNSPECIFIED: | |
| mwifiex_dbg(priv->adapter, INFO, | |
| "%s: kept type as P2P\n", dev->name); | |
| case NL80211_IFTYPE_P2P_CLIENT: | |
| case NL80211_IFTYPE_P2P_GO: | |
| return 0; | |
| default: | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "%s: changing to %d not supported\n", | |
| dev->name, type); | |
| return -EOPNOTSUPP; | |
| } | |
| break; | |
| default: | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "%s: unknown iftype: %d\n", | |
| dev->name, dev->ieee80211_ptr->iftype); | |
| return -EOPNOTSUPP; | |
| } | |
| return 0; | |
| } | |
| static void | |
| mwifiex_parse_htinfo(struct mwifiex_private *priv, u8 tx_htinfo, | |
| struct rate_info *rate) | |
| { | |
| struct mwifiex_adapter *adapter = priv->adapter; | |
| if (adapter->is_hw_11ac_capable) { | |
| /* bit[1-0]: 00=LG 01=HT 10=VHT */ | |
| if (tx_htinfo & BIT(0)) { | |
| /* HT */ | |
| rate->mcs = priv->tx_rate; | |
| rate->flags |= RATE_INFO_FLAGS_MCS; | |
| } | |
| if (tx_htinfo & BIT(1)) { | |
| /* VHT */ | |
| rate->mcs = priv->tx_rate & 0x0F; | |
| rate->flags |= RATE_INFO_FLAGS_VHT_MCS; | |
| } | |
| if (tx_htinfo & (BIT(1) | BIT(0))) { | |
| /* HT or VHT */ | |
| switch (tx_htinfo & (BIT(3) | BIT(2))) { | |
| case 0: | |
| rate->bw = RATE_INFO_BW_20; | |
| break; | |
| case (BIT(2)): | |
| rate->bw = RATE_INFO_BW_40; | |
| break; | |
| case (BIT(3)): | |
| rate->bw = RATE_INFO_BW_80; | |
| break; | |
| case (BIT(3) | BIT(2)): | |
| rate->bw = RATE_INFO_BW_160; | |
| break; | |
| } | |
| if (tx_htinfo & BIT(4)) | |
| rate->flags |= RATE_INFO_FLAGS_SHORT_GI; | |
| if ((priv->tx_rate >> 4) == 1) | |
| rate->nss = 2; | |
| else | |
| rate->nss = 1; | |
| } | |
| } else { | |
| /* | |
| * Bit 0 in tx_htinfo indicates that current Tx rate | |
| * is 11n rate. Valid MCS index values for us are 0 to 15. | |
| */ | |
| if ((tx_htinfo & BIT(0)) && (priv->tx_rate < 16)) { | |
| rate->mcs = priv->tx_rate; | |
| rate->flags |= RATE_INFO_FLAGS_MCS; | |
| rate->bw = RATE_INFO_BW_20; | |
| if (tx_htinfo & BIT(1)) | |
| rate->bw = RATE_INFO_BW_40; | |
| if (tx_htinfo & BIT(2)) | |
| rate->flags |= RATE_INFO_FLAGS_SHORT_GI; | |
| } | |
| } | |
| } | |
| /* | |
| * This function dumps the station information on a buffer. | |
| * | |
| * The following information are shown - | |
| * - Total bytes transmitted | |
| * - Total bytes received | |
| * - Total packets transmitted | |
| * - Total packets received | |
| * - Signal quality level | |
| * - Transmission rate | |
| */ | |
| static int | |
| mwifiex_dump_station_info(struct mwifiex_private *priv, | |
| struct mwifiex_sta_node *node, | |
| struct station_info *sinfo) | |
| { | |
| u32 rate; | |
| sinfo->filled = BIT(NL80211_STA_INFO_RX_BYTES) | BIT(NL80211_STA_INFO_TX_BYTES) | | |
| BIT(NL80211_STA_INFO_RX_PACKETS) | BIT(NL80211_STA_INFO_TX_PACKETS) | | |
| BIT(NL80211_STA_INFO_TX_BITRATE) | | |
| BIT(NL80211_STA_INFO_SIGNAL) | BIT(NL80211_STA_INFO_SIGNAL_AVG); | |
| if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_UAP) { | |
| if (!node) | |
| return -ENOENT; | |
| sinfo->filled |= BIT(NL80211_STA_INFO_INACTIVE_TIME) | | |
| BIT(NL80211_STA_INFO_TX_FAILED); | |
| sinfo->inactive_time = | |
| jiffies_to_msecs(jiffies - node->stats.last_rx); | |
| sinfo->signal = node->stats.rssi; | |
| sinfo->signal_avg = node->stats.rssi; | |
| sinfo->rx_bytes = node->stats.rx_bytes; | |
| sinfo->tx_bytes = node->stats.tx_bytes; | |
| sinfo->rx_packets = node->stats.rx_packets; | |
| sinfo->tx_packets = node->stats.tx_packets; | |
| sinfo->tx_failed = node->stats.tx_failed; | |
| mwifiex_parse_htinfo(priv, node->stats.last_tx_htinfo, | |
| &sinfo->txrate); | |
| sinfo->txrate.legacy = node->stats.last_tx_rate * 5; | |
| return 0; | |
| } | |
| /* Get signal information from the firmware */ | |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_RSSI_INFO, | |
| HostCmd_ACT_GEN_GET, 0, NULL, true)) { | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "failed to get signal information\n"); | |
| return -EFAULT; | |
| } | |
| if (mwifiex_drv_get_data_rate(priv, &rate)) { | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "getting data rate error\n"); | |
| return -EFAULT; | |
| } | |
| /* Get DTIM period information from firmware */ | |
| mwifiex_send_cmd(priv, HostCmd_CMD_802_11_SNMP_MIB, | |
| HostCmd_ACT_GEN_GET, DTIM_PERIOD_I, | |
| &priv->dtim_period, true); | |
| mwifiex_parse_htinfo(priv, priv->tx_htinfo, &sinfo->txrate); | |
| sinfo->signal_avg = priv->bcn_rssi_avg; | |
| sinfo->rx_bytes = priv->stats.rx_bytes; | |
| sinfo->tx_bytes = priv->stats.tx_bytes; | |
| sinfo->rx_packets = priv->stats.rx_packets; | |
| sinfo->tx_packets = priv->stats.tx_packets; | |
| sinfo->signal = priv->bcn_rssi_avg; | |
| /* bit rate is in 500 kb/s units. Convert it to 100kb/s units */ | |
| sinfo->txrate.legacy = rate * 5; | |
| if (priv->bss_mode == NL80211_IFTYPE_STATION) { | |
| sinfo->filled |= BIT(NL80211_STA_INFO_BSS_PARAM); | |
| sinfo->bss_param.flags = 0; | |
| if (priv->curr_bss_params.bss_descriptor.cap_info_bitmap & | |
| WLAN_CAPABILITY_SHORT_PREAMBLE) | |
| sinfo->bss_param.flags |= | |
| BSS_PARAM_FLAGS_SHORT_PREAMBLE; | |
| if (priv->curr_bss_params.bss_descriptor.cap_info_bitmap & | |
| WLAN_CAPABILITY_SHORT_SLOT_TIME) | |
| sinfo->bss_param.flags |= | |
| BSS_PARAM_FLAGS_SHORT_SLOT_TIME; | |
| sinfo->bss_param.dtim_period = priv->dtim_period; | |
| sinfo->bss_param.beacon_interval = | |
| priv->curr_bss_params.bss_descriptor.beacon_period; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * CFG802.11 operation handler to get station information. | |
| * | |
| * This function only works in connected mode, and dumps the | |
| * requested station information, if available. | |
| */ | |
| static int | |
| mwifiex_cfg80211_get_station(struct wiphy *wiphy, struct net_device *dev, | |
| const u8 *mac, struct station_info *sinfo) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| if (!priv->media_connected) | |
| return -ENOENT; | |
| if (memcmp(mac, priv->cfg_bssid, ETH_ALEN)) | |
| return -ENOENT; | |
| return mwifiex_dump_station_info(priv, NULL, sinfo); | |
| } | |
| /* | |
| * CFG802.11 operation handler to dump station information. | |
| */ | |
| static int | |
| mwifiex_cfg80211_dump_station(struct wiphy *wiphy, struct net_device *dev, | |
| int idx, u8 *mac, struct station_info *sinfo) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| static struct mwifiex_sta_node *node; | |
| if ((GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA) && | |
| priv->media_connected && idx == 0) { | |
| ether_addr_copy(mac, priv->cfg_bssid); | |
| return mwifiex_dump_station_info(priv, NULL, sinfo); | |
| } else if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_UAP) { | |
| mwifiex_send_cmd(priv, HOST_CMD_APCMD_STA_LIST, | |
| HostCmd_ACT_GEN_GET, 0, NULL, true); | |
| if (node && (&node->list == &priv->sta_list)) { | |
| node = NULL; | |
| return -ENOENT; | |
| } | |
| node = list_prepare_entry(node, &priv->sta_list, list); | |
| list_for_each_entry_continue(node, &priv->sta_list, list) { | |
| ether_addr_copy(mac, node->mac_addr); | |
| return mwifiex_dump_station_info(priv, node, sinfo); | |
| } | |
| } | |
| return -ENOENT; | |
| } | |
| static int | |
| mwifiex_cfg80211_dump_survey(struct wiphy *wiphy, struct net_device *dev, | |
| int idx, struct survey_info *survey) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| struct mwifiex_chan_stats *pchan_stats = priv->adapter->chan_stats; | |
| enum nl80211_band band; | |
| mwifiex_dbg(priv->adapter, DUMP, "dump_survey idx=%d\n", idx); | |
| memset(survey, 0, sizeof(struct survey_info)); | |
| if ((GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA) && | |
| priv->media_connected && idx == 0) { | |
| u8 curr_bss_band = priv->curr_bss_params.band; | |
| u32 chan = priv->curr_bss_params.bss_descriptor.channel; | |
| band = mwifiex_band_to_radio_type(curr_bss_band); | |
| survey->channel = ieee80211_get_channel(wiphy, | |
| ieee80211_channel_to_frequency(chan, band)); | |
| if (priv->bcn_nf_last) { | |
| survey->filled = SURVEY_INFO_NOISE_DBM; | |
| survey->noise = priv->bcn_nf_last; | |
| } | |
| return 0; | |
| } | |
| if (idx >= priv->adapter->num_in_chan_stats) | |
| return -ENOENT; | |
| if (!pchan_stats[idx].cca_scan_dur) | |
| return 0; | |
| band = pchan_stats[idx].bandcfg; | |
| survey->channel = ieee80211_get_channel(wiphy, | |
| ieee80211_channel_to_frequency(pchan_stats[idx].chan_num, band)); | |
| survey->filled = SURVEY_INFO_NOISE_DBM | | |
| SURVEY_INFO_TIME | | |
| SURVEY_INFO_TIME_BUSY; | |
| survey->noise = pchan_stats[idx].noise; | |
| survey->time = pchan_stats[idx].cca_scan_dur; | |
| survey->time_busy = pchan_stats[idx].cca_busy_dur; | |
| return 0; | |
| } | |
| /* Supported rates to be advertised to the cfg80211 */ | |
| static struct ieee80211_rate mwifiex_rates[] = { | |
| {.bitrate = 10, .hw_value = 2, }, | |
| {.bitrate = 20, .hw_value = 4, }, | |
| {.bitrate = 55, .hw_value = 11, }, | |
| {.bitrate = 110, .hw_value = 22, }, | |
| {.bitrate = 60, .hw_value = 12, }, | |
| {.bitrate = 90, .hw_value = 18, }, | |
| {.bitrate = 120, .hw_value = 24, }, | |
| {.bitrate = 180, .hw_value = 36, }, | |
| {.bitrate = 240, .hw_value = 48, }, | |
| {.bitrate = 360, .hw_value = 72, }, | |
| {.bitrate = 480, .hw_value = 96, }, | |
| {.bitrate = 540, .hw_value = 108, }, | |
| }; | |
| /* Channel definitions to be advertised to cfg80211 */ | |
| static struct ieee80211_channel mwifiex_channels_2ghz[] = { | |
| {.center_freq = 2412, .hw_value = 1, }, | |
| {.center_freq = 2417, .hw_value = 2, }, | |
| {.center_freq = 2422, .hw_value = 3, }, | |
| {.center_freq = 2427, .hw_value = 4, }, | |
| {.center_freq = 2432, .hw_value = 5, }, | |
| {.center_freq = 2437, .hw_value = 6, }, | |
| {.center_freq = 2442, .hw_value = 7, }, | |
| {.center_freq = 2447, .hw_value = 8, }, | |
| {.center_freq = 2452, .hw_value = 9, }, | |
| {.center_freq = 2457, .hw_value = 10, }, | |
| {.center_freq = 2462, .hw_value = 11, }, | |
| {.center_freq = 2467, .hw_value = 12, }, | |
| {.center_freq = 2472, .hw_value = 13, }, | |
| {.center_freq = 2484, .hw_value = 14, }, | |
| }; | |
| static struct ieee80211_supported_band mwifiex_band_2ghz = { | |
| .channels = mwifiex_channels_2ghz, | |
| .n_channels = ARRAY_SIZE(mwifiex_channels_2ghz), | |
| .bitrates = mwifiex_rates, | |
| .n_bitrates = ARRAY_SIZE(mwifiex_rates), | |
| }; | |
| static struct ieee80211_channel mwifiex_channels_5ghz[] = { | |
| {.center_freq = 5040, .hw_value = 8, }, | |
| {.center_freq = 5060, .hw_value = 12, }, | |
| {.center_freq = 5080, .hw_value = 16, }, | |
| {.center_freq = 5170, .hw_value = 34, }, | |
| {.center_freq = 5190, .hw_value = 38, }, | |
| {.center_freq = 5210, .hw_value = 42, }, | |
| {.center_freq = 5230, .hw_value = 46, }, | |
| {.center_freq = 5180, .hw_value = 36, }, | |
| {.center_freq = 5200, .hw_value = 40, }, | |
| {.center_freq = 5220, .hw_value = 44, }, | |
| {.center_freq = 5240, .hw_value = 48, }, | |
| {.center_freq = 5260, .hw_value = 52, }, | |
| {.center_freq = 5280, .hw_value = 56, }, | |
| {.center_freq = 5300, .hw_value = 60, }, | |
| {.center_freq = 5320, .hw_value = 64, }, | |
| {.center_freq = 5500, .hw_value = 100, }, | |
| {.center_freq = 5520, .hw_value = 104, }, | |
| {.center_freq = 5540, .hw_value = 108, }, | |
| {.center_freq = 5560, .hw_value = 112, }, | |
| {.center_freq = 5580, .hw_value = 116, }, | |
| {.center_freq = 5600, .hw_value = 120, }, | |
| {.center_freq = 5620, .hw_value = 124, }, | |
| {.center_freq = 5640, .hw_value = 128, }, | |
| {.center_freq = 5660, .hw_value = 132, }, | |
| {.center_freq = 5680, .hw_value = 136, }, | |
| {.center_freq = 5700, .hw_value = 140, }, | |
| {.center_freq = 5745, .hw_value = 149, }, | |
| {.center_freq = 5765, .hw_value = 153, }, | |
| {.center_freq = 5785, .hw_value = 157, }, | |
| {.center_freq = 5805, .hw_value = 161, }, | |
| {.center_freq = 5825, .hw_value = 165, }, | |
| }; | |
| static struct ieee80211_supported_band mwifiex_band_5ghz = { | |
| .channels = mwifiex_channels_5ghz, | |
| .n_channels = ARRAY_SIZE(mwifiex_channels_5ghz), | |
| .bitrates = mwifiex_rates + 4, | |
| .n_bitrates = ARRAY_SIZE(mwifiex_rates) - 4, | |
| }; | |
| /* Supported crypto cipher suits to be advertised to cfg80211 */ | |
| static const u32 mwifiex_cipher_suites[] = { | |
| WLAN_CIPHER_SUITE_WEP40, | |
| WLAN_CIPHER_SUITE_WEP104, | |
| WLAN_CIPHER_SUITE_TKIP, | |
| WLAN_CIPHER_SUITE_CCMP, | |
| WLAN_CIPHER_SUITE_SMS4, | |
| WLAN_CIPHER_SUITE_AES_CMAC, | |
| }; | |
| /* Supported mgmt frame types to be advertised to cfg80211 */ | |
| static const struct ieee80211_txrx_stypes | |
| mwifiex_mgmt_stypes[NUM_NL80211_IFTYPES] = { | |
| [NL80211_IFTYPE_STATION] = { | |
| .tx = BIT(IEEE80211_STYPE_ACTION >> 4) | | |
| BIT(IEEE80211_STYPE_PROBE_RESP >> 4), | |
| .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | | |
| BIT(IEEE80211_STYPE_PROBE_REQ >> 4), | |
| }, | |
| [NL80211_IFTYPE_AP] = { | |
| .tx = BIT(IEEE80211_STYPE_ACTION >> 4) | | |
| BIT(IEEE80211_STYPE_PROBE_RESP >> 4), | |
| .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | | |
| BIT(IEEE80211_STYPE_PROBE_REQ >> 4), | |
| }, | |
| [NL80211_IFTYPE_P2P_CLIENT] = { | |
| .tx = BIT(IEEE80211_STYPE_ACTION >> 4) | | |
| BIT(IEEE80211_STYPE_PROBE_RESP >> 4), | |
| .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | | |
| BIT(IEEE80211_STYPE_PROBE_REQ >> 4), | |
| }, | |
| [NL80211_IFTYPE_P2P_GO] = { | |
| .tx = BIT(IEEE80211_STYPE_ACTION >> 4) | | |
| BIT(IEEE80211_STYPE_PROBE_RESP >> 4), | |
| .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | | |
| BIT(IEEE80211_STYPE_PROBE_REQ >> 4), | |
| }, | |
| }; | |
| /* | |
| * CFG802.11 operation handler for setting bit rates. | |
| * | |
| * Function configures data rates to firmware using bitrate mask | |
| * provided by cfg80211. | |
| */ | |
| static int mwifiex_cfg80211_set_bitrate_mask(struct wiphy *wiphy, | |
| struct net_device *dev, | |
| const u8 *peer, | |
| const struct cfg80211_bitrate_mask *mask) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| u16 bitmap_rates[MAX_BITMAP_RATES_SIZE]; | |
| enum nl80211_band band; | |
| struct mwifiex_adapter *adapter = priv->adapter; | |
| if (!priv->media_connected) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "Can not set Tx data rate in disconnected state\n"); | |
| return -EINVAL; | |
| } | |
| band = mwifiex_band_to_radio_type(priv->curr_bss_params.band); | |
| memset(bitmap_rates, 0, sizeof(bitmap_rates)); | |
| /* Fill HR/DSSS rates. */ | |
| if (band == NL80211_BAND_2GHZ) | |
| bitmap_rates[0] = mask->control[band].legacy & 0x000f; | |
| /* Fill OFDM rates */ | |
| if (band == NL80211_BAND_2GHZ) | |
| bitmap_rates[1] = (mask->control[band].legacy & 0x0ff0) >> 4; | |
| else | |
| bitmap_rates[1] = mask->control[band].legacy; | |
| /* Fill HT MCS rates */ | |
| bitmap_rates[2] = mask->control[band].ht_mcs[0]; | |
| if (adapter->hw_dev_mcs_support == HT_STREAM_2X2) | |
| bitmap_rates[2] |= mask->control[band].ht_mcs[1] << 8; | |
| /* Fill VHT MCS rates */ | |
| if (adapter->fw_api_ver == MWIFIEX_FW_V15) { | |
| bitmap_rates[10] = mask->control[band].vht_mcs[0]; | |
| if (adapter->hw_dev_mcs_support == HT_STREAM_2X2) | |
| bitmap_rates[11] = mask->control[band].vht_mcs[1]; | |
| } | |
| return mwifiex_send_cmd(priv, HostCmd_CMD_TX_RATE_CFG, | |
| HostCmd_ACT_GEN_SET, 0, bitmap_rates, true); | |
| } | |
| /* | |
| * CFG802.11 operation handler for connection quality monitoring. | |
| * | |
| * This function subscribes/unsubscribes HIGH_RSSI and LOW_RSSI | |
| * events to FW. | |
| */ | |
| static int mwifiex_cfg80211_set_cqm_rssi_config(struct wiphy *wiphy, | |
| struct net_device *dev, | |
| s32 rssi_thold, u32 rssi_hyst) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| struct mwifiex_ds_misc_subsc_evt subsc_evt; | |
| priv->cqm_rssi_thold = rssi_thold; | |
| priv->cqm_rssi_hyst = rssi_hyst; | |
| memset(&subsc_evt, 0x00, sizeof(struct mwifiex_ds_misc_subsc_evt)); | |
| subsc_evt.events = BITMASK_BCN_RSSI_LOW | BITMASK_BCN_RSSI_HIGH; | |
| /* Subscribe/unsubscribe low and high rssi events */ | |
| if (rssi_thold && rssi_hyst) { | |
| subsc_evt.action = HostCmd_ACT_BITWISE_SET; | |
| subsc_evt.bcn_l_rssi_cfg.abs_value = abs(rssi_thold); | |
| subsc_evt.bcn_h_rssi_cfg.abs_value = abs(rssi_thold); | |
| subsc_evt.bcn_l_rssi_cfg.evt_freq = 1; | |
| subsc_evt.bcn_h_rssi_cfg.evt_freq = 1; | |
| return mwifiex_send_cmd(priv, | |
| HostCmd_CMD_802_11_SUBSCRIBE_EVENT, | |
| 0, 0, &subsc_evt, true); | |
| } else { | |
| subsc_evt.action = HostCmd_ACT_BITWISE_CLR; | |
| return mwifiex_send_cmd(priv, | |
| HostCmd_CMD_802_11_SUBSCRIBE_EVENT, | |
| 0, 0, &subsc_evt, true); | |
| } | |
| return 0; | |
| } | |
| /* cfg80211 operation handler for change_beacon. | |
| * Function retrieves and sets modified management IEs to FW. | |
| */ | |
| static int mwifiex_cfg80211_change_beacon(struct wiphy *wiphy, | |
| struct net_device *dev, | |
| struct cfg80211_beacon_data *data) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| struct mwifiex_adapter *adapter = priv->adapter; | |
| mwifiex_cancel_scan(adapter); | |
| if (GET_BSS_ROLE(priv) != MWIFIEX_BSS_ROLE_UAP) { | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "%s: bss_type mismatched\n", __func__); | |
| return -EINVAL; | |
| } | |
| if (!priv->bss_started) { | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "%s: bss not started\n", __func__); | |
| return -EINVAL; | |
| } | |
| if (mwifiex_set_mgmt_ies(priv, data)) { | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "%s: setting mgmt ies failed\n", __func__); | |
| return -EFAULT; | |
| } | |
| return 0; | |
| } | |
| /* cfg80211 operation handler for del_station. | |
| * Function deauthenticates station which value is provided in mac parameter. | |
| * If mac is NULL/broadcast, all stations in associated station list are | |
| * deauthenticated. If bss is not started or there are no stations in | |
| * associated stations list, no action is taken. | |
| */ | |
| static int | |
| mwifiex_cfg80211_del_station(struct wiphy *wiphy, struct net_device *dev, | |
| struct station_del_parameters *params) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| struct mwifiex_sta_node *sta_node; | |
| u8 deauth_mac[ETH_ALEN]; | |
| unsigned long flags; | |
| if (!priv->bss_started && priv->wdev.cac_started) { | |
| mwifiex_dbg(priv->adapter, INFO, "%s: abort CAC!\n", __func__); | |
| mwifiex_abort_cac(priv); | |
| } | |
| if (list_empty(&priv->sta_list) || !priv->bss_started) | |
| return 0; | |
| if (!params->mac || is_broadcast_ether_addr(params->mac)) | |
| return 0; | |
| mwifiex_dbg(priv->adapter, INFO, "%s: mac address %pM\n", | |
| __func__, params->mac); | |
| eth_zero_addr(deauth_mac); | |
| spin_lock_irqsave(&priv->sta_list_spinlock, flags); | |
| sta_node = mwifiex_get_sta_entry(priv, params->mac); | |
| if (sta_node) | |
| ether_addr_copy(deauth_mac, params->mac); | |
| spin_unlock_irqrestore(&priv->sta_list_spinlock, flags); | |
| if (is_valid_ether_addr(deauth_mac)) { | |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_UAP_STA_DEAUTH, | |
| HostCmd_ACT_GEN_SET, 0, | |
| deauth_mac, true)) | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| static int | |
| mwifiex_cfg80211_set_antenna(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant) | |
| { | |
| struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy); | |
| struct mwifiex_private *priv = mwifiex_get_priv(adapter, | |
| MWIFIEX_BSS_ROLE_ANY); | |
| struct mwifiex_ds_ant_cfg ant_cfg; | |
| if (!tx_ant || !rx_ant) | |
| return -EOPNOTSUPP; | |
| if (adapter->hw_dev_mcs_support != HT_STREAM_2X2) { | |
| /* Not a MIMO chip. User should provide specific antenna number | |
| * for Tx/Rx path or enable all antennas for diversity | |
| */ | |
| if (tx_ant != rx_ant) | |
| return -EOPNOTSUPP; | |
| if ((tx_ant & (tx_ant - 1)) && | |
| (tx_ant != BIT(adapter->number_of_antenna) - 1)) | |
| return -EOPNOTSUPP; | |
| if ((tx_ant == BIT(adapter->number_of_antenna) - 1) && | |
| (priv->adapter->number_of_antenna > 1)) { | |
| tx_ant = RF_ANTENNA_AUTO; | |
| rx_ant = RF_ANTENNA_AUTO; | |
| } | |
| } else { | |
| struct ieee80211_sta_ht_cap *ht_info; | |
| int rx_mcs_supp; | |
| enum nl80211_band band; | |
| if ((tx_ant == 0x1 && rx_ant == 0x1)) { | |
| adapter->user_dev_mcs_support = HT_STREAM_1X1; | |
| if (adapter->is_hw_11ac_capable) | |
| adapter->usr_dot_11ac_mcs_support = | |
| MWIFIEX_11AC_MCS_MAP_1X1; | |
| } else { | |
| adapter->user_dev_mcs_support = HT_STREAM_2X2; | |
| if (adapter->is_hw_11ac_capable) | |
| adapter->usr_dot_11ac_mcs_support = | |
| MWIFIEX_11AC_MCS_MAP_2X2; | |
| } | |
| for (band = 0; band < NUM_NL80211_BANDS; band++) { | |
| if (!adapter->wiphy->bands[band]) | |
| continue; | |
| ht_info = &adapter->wiphy->bands[band]->ht_cap; | |
| rx_mcs_supp = | |
| GET_RXMCSSUPP(adapter->user_dev_mcs_support); | |
| memset(&ht_info->mcs, 0, adapter->number_of_antenna); | |
| memset(&ht_info->mcs, 0xff, rx_mcs_supp); | |
| } | |
| } | |
| ant_cfg.tx_ant = tx_ant; | |
| ant_cfg.rx_ant = rx_ant; | |
| return mwifiex_send_cmd(priv, HostCmd_CMD_RF_ANTENNA, | |
| HostCmd_ACT_GEN_SET, 0, &ant_cfg, true); | |
| } | |
| static int | |
| mwifiex_cfg80211_get_antenna(struct wiphy *wiphy, u32 *tx_ant, u32 *rx_ant) | |
| { | |
| struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy); | |
| struct mwifiex_private *priv = mwifiex_get_priv(adapter, | |
| MWIFIEX_BSS_ROLE_ANY); | |
| mwifiex_send_cmd(priv, HostCmd_CMD_RF_ANTENNA, | |
| HostCmd_ACT_GEN_GET, 0, NULL, true); | |
| *tx_ant = priv->tx_ant; | |
| *rx_ant = priv->rx_ant; | |
| return 0; | |
| } | |
| /* cfg80211 operation handler for stop ap. | |
| * Function stops BSS running at uAP interface. | |
| */ | |
| static int mwifiex_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *dev) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| mwifiex_abort_cac(priv); | |
| if (mwifiex_del_mgmt_ies(priv)) | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "Failed to delete mgmt IEs!\n"); | |
| priv->ap_11n_enabled = 0; | |
| memset(&priv->bss_cfg, 0, sizeof(priv->bss_cfg)); | |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_UAP_BSS_STOP, | |
| HostCmd_ACT_GEN_SET, 0, NULL, true)) { | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "Failed to stop the BSS\n"); | |
| return -1; | |
| } | |
| if (mwifiex_send_cmd(priv, HOST_CMD_APCMD_SYS_RESET, | |
| HostCmd_ACT_GEN_SET, 0, NULL, true)) { | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "Failed to reset BSS\n"); | |
| return -1; | |
| } | |
| if (netif_carrier_ok(priv->netdev)) | |
| netif_carrier_off(priv->netdev); | |
| mwifiex_stop_net_dev_queue(priv->netdev, priv->adapter); | |
| return 0; | |
| } | |
| /* cfg80211 operation handler for start_ap. | |
| * Function sets beacon period, DTIM period, SSID and security into | |
| * AP config structure. | |
| * AP is configured with these settings and BSS is started. | |
| */ | |
| static int mwifiex_cfg80211_start_ap(struct wiphy *wiphy, | |
| struct net_device *dev, | |
| struct cfg80211_ap_settings *params) | |
| { | |
| struct mwifiex_uap_bss_param *bss_cfg; | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| if (GET_BSS_ROLE(priv) != MWIFIEX_BSS_ROLE_UAP) | |
| return -1; | |
| bss_cfg = kzalloc(sizeof(struct mwifiex_uap_bss_param), GFP_KERNEL); | |
| if (!bss_cfg) | |
| return -ENOMEM; | |
| mwifiex_set_sys_config_invalid_data(bss_cfg); | |
| if (params->beacon_interval) | |
| bss_cfg->beacon_period = params->beacon_interval; | |
| if (params->dtim_period) | |
| bss_cfg->dtim_period = params->dtim_period; | |
| if (params->ssid && params->ssid_len) { | |
| memcpy(bss_cfg->ssid.ssid, params->ssid, params->ssid_len); | |
| bss_cfg->ssid.ssid_len = params->ssid_len; | |
| } | |
| if (params->inactivity_timeout > 0) { | |
| /* sta_ao_timer/ps_sta_ao_timer is in unit of 100ms */ | |
| bss_cfg->sta_ao_timer = 10 * params->inactivity_timeout; | |
| bss_cfg->ps_sta_ao_timer = 10 * params->inactivity_timeout; | |
| } | |
| switch (params->hidden_ssid) { | |
| case NL80211_HIDDEN_SSID_NOT_IN_USE: | |
| bss_cfg->bcast_ssid_ctl = 1; | |
| break; | |
| case NL80211_HIDDEN_SSID_ZERO_LEN: | |
| bss_cfg->bcast_ssid_ctl = 0; | |
| break; | |
| case NL80211_HIDDEN_SSID_ZERO_CONTENTS: | |
| /* firmware doesn't support this type of hidden SSID */ | |
| default: | |
| kfree(bss_cfg); | |
| return -EINVAL; | |
| } | |
| mwifiex_uap_set_channel(priv, bss_cfg, params->chandef); | |
| mwifiex_set_uap_rates(bss_cfg, params); | |
| if (mwifiex_set_secure_params(priv, bss_cfg, params)) { | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "Failed to parse secuirty parameters!\n"); | |
| goto out; | |
| } | |
| mwifiex_set_ht_params(priv, bss_cfg, params); | |
| if (priv->adapter->is_hw_11ac_capable) { | |
| mwifiex_set_vht_params(priv, bss_cfg, params); | |
| mwifiex_set_vht_width(priv, params->chandef.width, | |
| priv->ap_11ac_enabled); | |
| } | |
| if (priv->ap_11ac_enabled) | |
| mwifiex_set_11ac_ba_params(priv); | |
| else | |
| mwifiex_set_ba_params(priv); | |
| mwifiex_set_wmm_params(priv, bss_cfg, params); | |
| if (mwifiex_is_11h_active(priv)) | |
| mwifiex_set_tpc_params(priv, bss_cfg, params); | |
| if (mwifiex_is_11h_active(priv) && | |
| !cfg80211_chandef_dfs_required(wiphy, ¶ms->chandef, | |
| priv->bss_mode)) { | |
| mwifiex_dbg(priv->adapter, INFO, | |
| "Disable 11h extensions in FW\n"); | |
| if (mwifiex_11h_activate(priv, false)) { | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "Failed to disable 11h extensions!!"); | |
| goto out; | |
| } | |
| priv->state_11h.is_11h_active = false; | |
| } | |
| if (mwifiex_config_start_uap(priv, bss_cfg)) { | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "Failed to start AP\n"); | |
| goto out; | |
| } | |
| if (mwifiex_set_mgmt_ies(priv, ¶ms->beacon)) | |
| goto out; | |
| if (!netif_carrier_ok(priv->netdev)) | |
| netif_carrier_on(priv->netdev); | |
| mwifiex_wake_up_net_dev_queue(priv->netdev, priv->adapter); | |
| memcpy(&priv->bss_cfg, bss_cfg, sizeof(priv->bss_cfg)); | |
| kfree(bss_cfg); | |
| return 0; | |
| out: | |
| kfree(bss_cfg); | |
| return -1; | |
| } | |
| /* | |
| * CFG802.11 operation handler for disconnection request. | |
| * | |
| * This function does not work when there is already a disconnection | |
| * procedure going on. | |
| */ | |
| static int | |
| mwifiex_cfg80211_disconnect(struct wiphy *wiphy, struct net_device *dev, | |
| u16 reason_code) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| if (!mwifiex_stop_bg_scan(priv)) | |
| cfg80211_sched_scan_stopped_rtnl(priv->wdev.wiphy); | |
| if (mwifiex_deauthenticate(priv, NULL)) | |
| return -EFAULT; | |
| eth_zero_addr(priv->cfg_bssid); | |
| priv->hs2_enabled = false; | |
| return 0; | |
| } | |
| /* | |
| * This function informs the CFG802.11 subsystem of a new IBSS. | |
| * | |
| * The following information are sent to the CFG802.11 subsystem | |
| * to register the new IBSS. If we do not register the new IBSS, | |
| * a kernel panic will result. | |
| * - SSID | |
| * - SSID length | |
| * - BSSID | |
| * - Channel | |
| */ | |
| static int mwifiex_cfg80211_inform_ibss_bss(struct mwifiex_private *priv) | |
| { | |
| struct ieee80211_channel *chan; | |
| struct mwifiex_bss_info bss_info; | |
| struct cfg80211_bss *bss; | |
| int ie_len; | |
| u8 ie_buf[IEEE80211_MAX_SSID_LEN + sizeof(struct ieee_types_header)]; | |
| enum nl80211_band band; | |
| if (mwifiex_get_bss_info(priv, &bss_info)) | |
| return -1; | |
| ie_buf[0] = WLAN_EID_SSID; | |
| ie_buf[1] = bss_info.ssid.ssid_len; | |
| memcpy(&ie_buf[sizeof(struct ieee_types_header)], | |
| &bss_info.ssid.ssid, bss_info.ssid.ssid_len); | |
| ie_len = ie_buf[1] + sizeof(struct ieee_types_header); | |
| band = mwifiex_band_to_radio_type(priv->curr_bss_params.band); | |
| chan = __ieee80211_get_channel(priv->wdev.wiphy, | |
| ieee80211_channel_to_frequency(bss_info.bss_chan, | |
| band)); | |
| bss = cfg80211_inform_bss(priv->wdev.wiphy, chan, | |
| CFG80211_BSS_FTYPE_UNKNOWN, | |
| bss_info.bssid, 0, WLAN_CAPABILITY_IBSS, | |
| 0, ie_buf, ie_len, 0, GFP_KERNEL); | |
| if (bss) { | |
| cfg80211_put_bss(priv->wdev.wiphy, bss); | |
| ether_addr_copy(priv->cfg_bssid, bss_info.bssid); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * This function connects with a BSS. | |
| * | |
| * This function handles both Infra and Ad-Hoc modes. It also performs | |
| * validity checking on the provided parameters, disconnects from the | |
| * current BSS (if any), sets up the association/scan parameters, | |
| * including security settings, and performs specific SSID scan before | |
| * trying to connect. | |
| * | |
| * For Infra mode, the function returns failure if the specified SSID | |
| * is not found in scan table. However, for Ad-Hoc mode, it can create | |
| * the IBSS if it does not exist. On successful completion in either case, | |
| * the function notifies the CFG802.11 subsystem of the new BSS connection. | |
| */ | |
| static int | |
| mwifiex_cfg80211_assoc(struct mwifiex_private *priv, size_t ssid_len, | |
| const u8 *ssid, const u8 *bssid, int mode, | |
| struct ieee80211_channel *channel, | |
| struct cfg80211_connect_params *sme, bool privacy) | |
| { | |
| struct cfg80211_ssid req_ssid; | |
| int ret, auth_type = 0; | |
| struct cfg80211_bss *bss = NULL; | |
| u8 is_scanning_required = 0; | |
| memset(&req_ssid, 0, sizeof(struct cfg80211_ssid)); | |
| req_ssid.ssid_len = ssid_len; | |
| if (ssid_len > IEEE80211_MAX_SSID_LEN) { | |
| mwifiex_dbg(priv->adapter, ERROR, "invalid SSID - aborting\n"); | |
| return -EINVAL; | |
| } | |
| memcpy(req_ssid.ssid, ssid, ssid_len); | |
| if (!req_ssid.ssid_len || req_ssid.ssid[0] < 0x20) { | |
| mwifiex_dbg(priv->adapter, ERROR, "invalid SSID - aborting\n"); | |
| return -EINVAL; | |
| } | |
| /* As this is new association, clear locally stored | |
| * keys and security related flags */ | |
| priv->sec_info.wpa_enabled = false; | |
| priv->sec_info.wpa2_enabled = false; | |
| priv->wep_key_curr_index = 0; | |
| priv->sec_info.encryption_mode = 0; | |
| priv->sec_info.is_authtype_auto = 0; | |
| ret = mwifiex_set_encode(priv, NULL, NULL, 0, 0, NULL, 1); | |
| if (mode == NL80211_IFTYPE_ADHOC) { | |
| /* "privacy" is set only for ad-hoc mode */ | |
| if (privacy) { | |
| /* | |
| * Keep WLAN_CIPHER_SUITE_WEP104 for now so that | |
| * the firmware can find a matching network from the | |
| * scan. The cfg80211 does not give us the encryption | |
| * mode at this stage so just setting it to WEP here. | |
| */ | |
| priv->sec_info.encryption_mode = | |
| WLAN_CIPHER_SUITE_WEP104; | |
| priv->sec_info.authentication_mode = | |
| NL80211_AUTHTYPE_OPEN_SYSTEM; | |
| } | |
| goto done; | |
| } | |
| /* Now handle infra mode. "sme" is valid for infra mode only */ | |
| if (sme->auth_type == NL80211_AUTHTYPE_AUTOMATIC) { | |
| auth_type = NL80211_AUTHTYPE_OPEN_SYSTEM; | |
| priv->sec_info.is_authtype_auto = 1; | |
| } else { | |
| auth_type = sme->auth_type; | |
| } | |
| if (sme->crypto.n_ciphers_pairwise) { | |
| priv->sec_info.encryption_mode = | |
| sme->crypto.ciphers_pairwise[0]; | |
| priv->sec_info.authentication_mode = auth_type; | |
| } | |
| if (sme->crypto.cipher_group) { | |
| priv->sec_info.encryption_mode = sme->crypto.cipher_group; | |
| priv->sec_info.authentication_mode = auth_type; | |
| } | |
| if (sme->ie) | |
| ret = mwifiex_set_gen_ie(priv, sme->ie, sme->ie_len); | |
| if (sme->key) { | |
| if (mwifiex_is_alg_wep(priv->sec_info.encryption_mode)) { | |
| mwifiex_dbg(priv->adapter, INFO, | |
| "info: setting wep encryption\t" | |
| "with key len %d\n", sme->key_len); | |
| priv->wep_key_curr_index = sme->key_idx; | |
| ret = mwifiex_set_encode(priv, NULL, sme->key, | |
| sme->key_len, sme->key_idx, | |
| NULL, 0); | |
| } | |
| } | |
| done: | |
| /* | |
| * Scan entries are valid for some time (15 sec). So we can save one | |
| * active scan time if we just try cfg80211_get_bss first. If it fails | |
| * then request scan and cfg80211_get_bss() again for final output. | |
| */ | |
| while (1) { | |
| if (is_scanning_required) { | |
| /* Do specific SSID scanning */ | |
| if (mwifiex_request_scan(priv, &req_ssid)) { | |
| mwifiex_dbg(priv->adapter, ERROR, "scan error\n"); | |
| return -EFAULT; | |
| } | |
| } | |
| /* Find the BSS we want using available scan results */ | |
| if (mode == NL80211_IFTYPE_ADHOC) | |
| bss = cfg80211_get_bss(priv->wdev.wiphy, channel, | |
| bssid, ssid, ssid_len, | |
| IEEE80211_BSS_TYPE_IBSS, | |
| IEEE80211_PRIVACY_ANY); | |
| else | |
| bss = cfg80211_get_bss(priv->wdev.wiphy, channel, | |
| bssid, ssid, ssid_len, | |
| IEEE80211_BSS_TYPE_ESS, | |
| IEEE80211_PRIVACY_ANY); | |
| if (!bss) { | |
| if (is_scanning_required) { | |
| mwifiex_dbg(priv->adapter, WARN, | |
| "assoc: requested bss not found in scan results\n"); | |
| break; | |
| } | |
| is_scanning_required = 1; | |
| } else { | |
| mwifiex_dbg(priv->adapter, MSG, | |
| "info: trying to associate to '%.*s' bssid %pM\n", | |
| req_ssid.ssid_len, (char *)req_ssid.ssid, | |
| bss->bssid); | |
| memcpy(&priv->cfg_bssid, bss->bssid, ETH_ALEN); | |
| break; | |
| } | |
| } | |
| ret = mwifiex_bss_start(priv, bss, &req_ssid); | |
| if (ret) | |
| return ret; | |
| if (mode == NL80211_IFTYPE_ADHOC) { | |
| /* Inform the BSS information to kernel, otherwise | |
| * kernel will give a panic after successful assoc */ | |
| if (mwifiex_cfg80211_inform_ibss_bss(priv)) | |
| return -EFAULT; | |
| } | |
| return ret; | |
| } | |
| /* | |
| * CFG802.11 operation handler for association request. | |
| * | |
| * This function does not work when the current mode is set to Ad-Hoc, or | |
| * when there is already an association procedure going on. The given BSS | |
| * information is used to associate. | |
| */ | |
| static int | |
| mwifiex_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev, | |
| struct cfg80211_connect_params *sme) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| struct mwifiex_adapter *adapter = priv->adapter; | |
| int ret; | |
| if (GET_BSS_ROLE(priv) != MWIFIEX_BSS_ROLE_STA) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "%s: reject infra assoc request in non-STA role\n", | |
| dev->name); | |
| return -EINVAL; | |
| } | |
| if (priv->wdev.current_bss) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "%s: already connected\n", dev->name); | |
| return -EALREADY; | |
| } | |
| if (priv->scan_block) | |
| priv->scan_block = false; | |
| if (adapter->surprise_removed || adapter->is_cmd_timedout) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "%s: Ignore connection.\t" | |
| "Card removed or FW in bad state\n", | |
| dev->name); | |
| return -EFAULT; | |
| } | |
| mwifiex_dbg(adapter, INFO, | |
| "info: Trying to associate to %.*s and bssid %pM\n", | |
| (int)sme->ssid_len, (char *)sme->ssid, sme->bssid); | |
| if (!mwifiex_stop_bg_scan(priv)) | |
| cfg80211_sched_scan_stopped_rtnl(priv->wdev.wiphy); | |
| ret = mwifiex_cfg80211_assoc(priv, sme->ssid_len, sme->ssid, sme->bssid, | |
| priv->bss_mode, sme->channel, sme, 0); | |
| if (!ret) { | |
| cfg80211_connect_result(priv->netdev, priv->cfg_bssid, NULL, 0, | |
| NULL, 0, WLAN_STATUS_SUCCESS, | |
| GFP_KERNEL); | |
| mwifiex_dbg(priv->adapter, MSG, | |
| "info: associated to bssid %pM successfully\n", | |
| priv->cfg_bssid); | |
| if (ISSUPP_TDLS_ENABLED(priv->adapter->fw_cap_info) && | |
| priv->adapter->auto_tdls && | |
| priv->bss_type == MWIFIEX_BSS_TYPE_STA) | |
| mwifiex_setup_auto_tdls_timer(priv); | |
| } else { | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "info: association to bssid %pM failed\n", | |
| priv->cfg_bssid); | |
| eth_zero_addr(priv->cfg_bssid); | |
| if (ret > 0) | |
| cfg80211_connect_result(priv->netdev, priv->cfg_bssid, | |
| NULL, 0, NULL, 0, ret, | |
| GFP_KERNEL); | |
| else | |
| cfg80211_connect_result(priv->netdev, priv->cfg_bssid, | |
| NULL, 0, NULL, 0, | |
| WLAN_STATUS_UNSPECIFIED_FAILURE, | |
| GFP_KERNEL); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * This function sets following parameters for ibss network. | |
| * - channel | |
| * - start band | |
| * - 11n flag | |
| * - secondary channel offset | |
| */ | |
| static int mwifiex_set_ibss_params(struct mwifiex_private *priv, | |
| struct cfg80211_ibss_params *params) | |
| { | |
| struct mwifiex_adapter *adapter = priv->adapter; | |
| int index = 0, i; | |
| u8 config_bands = 0; | |
| if (params->chandef.chan->band == NL80211_BAND_2GHZ) { | |
| if (!params->basic_rates) { | |
| config_bands = BAND_B | BAND_G; | |
| } else { | |
| for (i = 0; i < mwifiex_band_2ghz.n_bitrates; i++) { | |
| /* | |
| * Rates below 6 Mbps in the table are CCK | |
| * rates; 802.11b and from 6 they are OFDM; | |
| * 802.11G | |
| */ | |
| if (mwifiex_rates[i].bitrate == 60) { | |
| index = 1 << i; | |
| break; | |
| } | |
| } | |
| if (params->basic_rates < index) { | |
| config_bands = BAND_B; | |
| } else { | |
| config_bands = BAND_G; | |
| if (params->basic_rates % index) | |
| config_bands |= BAND_B; | |
| } | |
| } | |
| if (cfg80211_get_chandef_type(¶ms->chandef) != | |
| NL80211_CHAN_NO_HT) | |
| config_bands |= BAND_G | BAND_GN; | |
| } else { | |
| if (cfg80211_get_chandef_type(¶ms->chandef) == | |
| NL80211_CHAN_NO_HT) | |
| config_bands = BAND_A; | |
| else | |
| config_bands = BAND_AN | BAND_A; | |
| } | |
| if (!((config_bands | adapter->fw_bands) & ~adapter->fw_bands)) { | |
| adapter->config_bands = config_bands; | |
| adapter->adhoc_start_band = config_bands; | |
| if ((config_bands & BAND_GN) || (config_bands & BAND_AN)) | |
| adapter->adhoc_11n_enabled = true; | |
| else | |
| adapter->adhoc_11n_enabled = false; | |
| } | |
| adapter->sec_chan_offset = | |
| mwifiex_chan_type_to_sec_chan_offset( | |
| cfg80211_get_chandef_type(¶ms->chandef)); | |
| priv->adhoc_channel = ieee80211_frequency_to_channel( | |
| params->chandef.chan->center_freq); | |
| mwifiex_dbg(adapter, INFO, | |
| "info: set ibss band %d, chan %d, chan offset %d\n", | |
| config_bands, priv->adhoc_channel, | |
| adapter->sec_chan_offset); | |
| return 0; | |
| } | |
| /* | |
| * CFG802.11 operation handler to join an IBSS. | |
| * | |
| * This function does not work in any mode other than Ad-Hoc, or if | |
| * a join operation is already in progress. | |
| */ | |
| static int | |
| mwifiex_cfg80211_join_ibss(struct wiphy *wiphy, struct net_device *dev, | |
| struct cfg80211_ibss_params *params) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| int ret = 0; | |
| if (priv->bss_mode != NL80211_IFTYPE_ADHOC) { | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "request to join ibss received\t" | |
| "when station is not in ibss mode\n"); | |
| goto done; | |
| } | |
| mwifiex_dbg(priv->adapter, MSG, | |
| "info: trying to join to %.*s and bssid %pM\n", | |
| params->ssid_len, (char *)params->ssid, params->bssid); | |
| mwifiex_set_ibss_params(priv, params); | |
| ret = mwifiex_cfg80211_assoc(priv, params->ssid_len, params->ssid, | |
| params->bssid, priv->bss_mode, | |
| params->chandef.chan, NULL, | |
| params->privacy); | |
| done: | |
| if (!ret) { | |
| cfg80211_ibss_joined(priv->netdev, priv->cfg_bssid, | |
| params->chandef.chan, GFP_KERNEL); | |
| mwifiex_dbg(priv->adapter, MSG, | |
| "info: joined/created adhoc network with bssid\t" | |
| "%pM successfully\n", priv->cfg_bssid); | |
| } else { | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "info: failed creating/joining adhoc network\n"); | |
| } | |
| return ret; | |
| } | |
| /* | |
| * CFG802.11 operation handler to leave an IBSS. | |
| * | |
| * This function does not work if a leave operation is | |
| * already in progress. | |
| */ | |
| static int | |
| mwifiex_cfg80211_leave_ibss(struct wiphy *wiphy, struct net_device *dev) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| mwifiex_dbg(priv->adapter, MSG, "info: disconnecting from essid %pM\n", | |
| priv->cfg_bssid); | |
| if (mwifiex_deauthenticate(priv, NULL)) | |
| return -EFAULT; | |
| eth_zero_addr(priv->cfg_bssid); | |
| return 0; | |
| } | |
| /* | |
| * CFG802.11 operation handler for scan request. | |
| * | |
| * This function issues a scan request to the firmware based upon | |
| * the user specified scan configuration. On successful completion, | |
| * it also informs the results. | |
| */ | |
| static int | |
| mwifiex_cfg80211_scan(struct wiphy *wiphy, | |
| struct cfg80211_scan_request *request) | |
| { | |
| struct net_device *dev = request->wdev->netdev; | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| int i, offset, ret; | |
| struct ieee80211_channel *chan; | |
| struct ieee_types_header *ie; | |
| struct mwifiex_user_scan_cfg *user_scan_cfg; | |
| mwifiex_dbg(priv->adapter, CMD, | |
| "info: received scan request on %s\n", dev->name); | |
| /* Block scan request if scan operation or scan cleanup when interface | |
| * is disabled is in process | |
| */ | |
| if (priv->scan_request || priv->scan_aborting) { | |
| mwifiex_dbg(priv->adapter, WARN, | |
| "cmd: Scan already in process..\n"); | |
| return -EBUSY; | |
| } | |
| if (!priv->wdev.current_bss && priv->scan_block) | |
| priv->scan_block = false; | |
| if (!mwifiex_stop_bg_scan(priv)) | |
| cfg80211_sched_scan_stopped_rtnl(priv->wdev.wiphy); | |
| user_scan_cfg = kzalloc(sizeof(*user_scan_cfg), GFP_KERNEL); | |
| if (!user_scan_cfg) | |
| return -ENOMEM; | |
| priv->scan_request = request; | |
| if (request->flags & NL80211_SCAN_FLAG_RANDOM_ADDR) { | |
| ether_addr_copy(priv->random_mac, request->mac_addr); | |
| for (i = 0; i < ETH_ALEN; i++) { | |
| priv->random_mac[i] &= request->mac_addr_mask[i]; | |
| priv->random_mac[i] |= get_random_int() & | |
| ~(request->mac_addr_mask[i]); | |
| } | |
| } | |
| ether_addr_copy(user_scan_cfg->random_mac, priv->random_mac); | |
| user_scan_cfg->num_ssids = request->n_ssids; | |
| user_scan_cfg->ssid_list = request->ssids; | |
| if (request->ie && request->ie_len) { | |
| offset = 0; | |
| for (i = 0; i < MWIFIEX_MAX_VSIE_NUM; i++) { | |
| if (priv->vs_ie[i].mask != MWIFIEX_VSIE_MASK_CLEAR) | |
| continue; | |
| priv->vs_ie[i].mask = MWIFIEX_VSIE_MASK_SCAN; | |
| ie = (struct ieee_types_header *)(request->ie + offset); | |
| memcpy(&priv->vs_ie[i].ie, ie, sizeof(*ie) + ie->len); | |
| offset += sizeof(*ie) + ie->len; | |
| if (offset >= request->ie_len) | |
| break; | |
| } | |
| } | |
| for (i = 0; i < min_t(u32, request->n_channels, | |
| MWIFIEX_USER_SCAN_CHAN_MAX); i++) { | |
| chan = request->channels[i]; | |
| user_scan_cfg->chan_list[i].chan_number = chan->hw_value; | |
| user_scan_cfg->chan_list[i].radio_type = chan->band; | |
| if ((chan->flags & IEEE80211_CHAN_NO_IR) || !request->n_ssids) | |
| user_scan_cfg->chan_list[i].scan_type = | |
| MWIFIEX_SCAN_TYPE_PASSIVE; | |
| else | |
| user_scan_cfg->chan_list[i].scan_type = | |
| MWIFIEX_SCAN_TYPE_ACTIVE; | |
| user_scan_cfg->chan_list[i].scan_time = 0; | |
| } | |
| if (priv->adapter->scan_chan_gap_enabled && | |
| mwifiex_is_any_intf_active(priv)) | |
| user_scan_cfg->scan_chan_gap = | |
| priv->adapter->scan_chan_gap_time; | |
| ret = mwifiex_scan_networks(priv, user_scan_cfg); | |
| kfree(user_scan_cfg); | |
| if (ret) { | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "scan failed: %d\n", ret); | |
| priv->scan_aborting = false; | |
| priv->scan_request = NULL; | |
| return ret; | |
| } | |
| if (request->ie && request->ie_len) { | |
| for (i = 0; i < MWIFIEX_MAX_VSIE_NUM; i++) { | |
| if (priv->vs_ie[i].mask == MWIFIEX_VSIE_MASK_SCAN) { | |
| priv->vs_ie[i].mask = MWIFIEX_VSIE_MASK_CLEAR; | |
| memset(&priv->vs_ie[i].ie, 0, | |
| MWIFIEX_MAX_VSIE_LEN); | |
| } | |
| } | |
| } | |
| return 0; | |
| } | |
| /* CFG802.11 operation handler for sched_scan_start. | |
| * | |
| * This function issues a bgscan config request to the firmware based upon | |
| * the user specified sched_scan configuration. On successful completion, | |
| * firmware will generate BGSCAN_REPORT event, driver should issue bgscan | |
| * query command to get sched_scan results from firmware. | |
| */ | |
| static int | |
| mwifiex_cfg80211_sched_scan_start(struct wiphy *wiphy, | |
| struct net_device *dev, | |
| struct cfg80211_sched_scan_request *request) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| int i, offset; | |
| struct ieee80211_channel *chan; | |
| struct mwifiex_bg_scan_cfg *bgscan_cfg; | |
| struct ieee_types_header *ie; | |
| if (!request || (!request->n_ssids && !request->n_match_sets)) { | |
| wiphy_err(wiphy, "%s : Invalid Sched_scan parameters", | |
| __func__); | |
| return -EINVAL; | |
| } | |
| wiphy_info(wiphy, "sched_scan start : n_ssids=%d n_match_sets=%d ", | |
| request->n_ssids, request->n_match_sets); | |
| wiphy_info(wiphy, "n_channels=%d interval=%d ie_len=%d\n", | |
| request->n_channels, request->scan_plans->interval, | |
| (int)request->ie_len); | |
| bgscan_cfg = kzalloc(sizeof(*bgscan_cfg), GFP_KERNEL); | |
| if (!bgscan_cfg) | |
| return -ENOMEM; | |
| if (priv->scan_request || priv->scan_aborting) | |
| bgscan_cfg->start_later = true; | |
| bgscan_cfg->num_ssids = request->n_match_sets; | |
| bgscan_cfg->ssid_list = request->match_sets; | |
| if (request->ie && request->ie_len) { | |
| offset = 0; | |
| for (i = 0; i < MWIFIEX_MAX_VSIE_NUM; i++) { | |
| if (priv->vs_ie[i].mask != MWIFIEX_VSIE_MASK_CLEAR) | |
| continue; | |
| priv->vs_ie[i].mask = MWIFIEX_VSIE_MASK_BGSCAN; | |
| ie = (struct ieee_types_header *)(request->ie + offset); | |
| memcpy(&priv->vs_ie[i].ie, ie, sizeof(*ie) + ie->len); | |
| offset += sizeof(*ie) + ie->len; | |
| if (offset >= request->ie_len) | |
| break; | |
| } | |
| } | |
| for (i = 0; i < min_t(u32, request->n_channels, | |
| MWIFIEX_BG_SCAN_CHAN_MAX); i++) { | |
| chan = request->channels[i]; | |
| bgscan_cfg->chan_list[i].chan_number = chan->hw_value; | |
| bgscan_cfg->chan_list[i].radio_type = chan->band; | |
| if ((chan->flags & IEEE80211_CHAN_NO_IR) || !request->n_ssids) | |
| bgscan_cfg->chan_list[i].scan_type = | |
| MWIFIEX_SCAN_TYPE_PASSIVE; | |
| else | |
| bgscan_cfg->chan_list[i].scan_type = | |
| MWIFIEX_SCAN_TYPE_ACTIVE; | |
| bgscan_cfg->chan_list[i].scan_time = 0; | |
| } | |
| bgscan_cfg->chan_per_scan = min_t(u32, request->n_channels, | |
| MWIFIEX_BG_SCAN_CHAN_MAX); | |
| /* Use at least 15 second for per scan cycle */ | |
| bgscan_cfg->scan_interval = (request->scan_plans->interval > | |
| MWIFIEX_BGSCAN_INTERVAL) ? | |
| request->scan_plans->interval : | |
| MWIFIEX_BGSCAN_INTERVAL; | |
| bgscan_cfg->repeat_count = MWIFIEX_BGSCAN_REPEAT_COUNT; | |
| bgscan_cfg->report_condition = MWIFIEX_BGSCAN_SSID_MATCH | | |
| MWIFIEX_BGSCAN_WAIT_ALL_CHAN_DONE; | |
| bgscan_cfg->bss_type = MWIFIEX_BSS_MODE_INFRA; | |
| bgscan_cfg->action = MWIFIEX_BGSCAN_ACT_SET; | |
| bgscan_cfg->enable = true; | |
| if (request->min_rssi_thold != NL80211_SCAN_RSSI_THOLD_OFF) { | |
| bgscan_cfg->report_condition |= MWIFIEX_BGSCAN_SSID_RSSI_MATCH; | |
| bgscan_cfg->rssi_threshold = request->min_rssi_thold; | |
| } | |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_802_11_BG_SCAN_CONFIG, | |
| HostCmd_ACT_GEN_SET, 0, bgscan_cfg, true)) { | |
| kfree(bgscan_cfg); | |
| return -EFAULT; | |
| } | |
| priv->sched_scanning = true; | |
| kfree(bgscan_cfg); | |
| return 0; | |
| } | |
| /* CFG802.11 operation handler for sched_scan_stop. | |
| * | |
| * This function issues a bgscan config command to disable | |
| * previous bgscan configuration in the firmware | |
| */ | |
| static int mwifiex_cfg80211_sched_scan_stop(struct wiphy *wiphy, | |
| struct net_device *dev) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| wiphy_info(wiphy, "sched scan stop!"); | |
| mwifiex_stop_bg_scan(priv); | |
| return 0; | |
| } | |
| static void mwifiex_setup_vht_caps(struct ieee80211_sta_vht_cap *vht_info, | |
| struct mwifiex_private *priv) | |
| { | |
| struct mwifiex_adapter *adapter = priv->adapter; | |
| vht_info->vht_supported = true; | |
| vht_info->cap = adapter->hw_dot_11ac_dev_cap; | |
| /* Update MCS support for VHT */ | |
| vht_info->vht_mcs.rx_mcs_map = cpu_to_le16( | |
| adapter->hw_dot_11ac_mcs_support & 0xFFFF); | |
| vht_info->vht_mcs.rx_highest = 0; | |
| vht_info->vht_mcs.tx_mcs_map = cpu_to_le16( | |
| adapter->hw_dot_11ac_mcs_support >> 16); | |
| vht_info->vht_mcs.tx_highest = 0; | |
| } | |
| /* | |
| * This function sets up the CFG802.11 specific HT capability fields | |
| * with default values. | |
| * | |
| * The following default values are set - | |
| * - HT Supported = True | |
| * - Maximum AMPDU length factor = IEEE80211_HT_MAX_AMPDU_64K | |
| * - Minimum AMPDU spacing = IEEE80211_HT_MPDU_DENSITY_NONE | |
| * - HT Capabilities supported by firmware | |
| * - MCS information, Rx mask = 0xff | |
| * - MCD information, Tx parameters = IEEE80211_HT_MCS_TX_DEFINED (0x01) | |
| */ | |
| static void | |
| mwifiex_setup_ht_caps(struct ieee80211_sta_ht_cap *ht_info, | |
| struct mwifiex_private *priv) | |
| { | |
| int rx_mcs_supp; | |
| struct ieee80211_mcs_info mcs_set; | |
| u8 *mcs = (u8 *)&mcs_set; | |
| struct mwifiex_adapter *adapter = priv->adapter; | |
| ht_info->ht_supported = true; | |
| ht_info->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K; | |
| ht_info->ampdu_density = IEEE80211_HT_MPDU_DENSITY_NONE; | |
| memset(&ht_info->mcs, 0, sizeof(ht_info->mcs)); | |
| /* Fill HT capability information */ | |
| if (ISSUPP_CHANWIDTH40(adapter->hw_dot_11n_dev_cap)) | |
| ht_info->cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40; | |
| else | |
| ht_info->cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; | |
| if (ISSUPP_SHORTGI20(adapter->hw_dot_11n_dev_cap)) | |
| ht_info->cap |= IEEE80211_HT_CAP_SGI_20; | |
| else | |
| ht_info->cap &= ~IEEE80211_HT_CAP_SGI_20; | |
| if (ISSUPP_SHORTGI40(adapter->hw_dot_11n_dev_cap)) | |
| ht_info->cap |= IEEE80211_HT_CAP_SGI_40; | |
| else | |
| ht_info->cap &= ~IEEE80211_HT_CAP_SGI_40; | |
| if (adapter->user_dev_mcs_support == HT_STREAM_2X2) | |
| ht_info->cap |= 2 << IEEE80211_HT_CAP_RX_STBC_SHIFT; | |
| else | |
| ht_info->cap |= 1 << IEEE80211_HT_CAP_RX_STBC_SHIFT; | |
| if (ISSUPP_TXSTBC(adapter->hw_dot_11n_dev_cap)) | |
| ht_info->cap |= IEEE80211_HT_CAP_TX_STBC; | |
| else | |
| ht_info->cap &= ~IEEE80211_HT_CAP_TX_STBC; | |
| if (ISSUPP_GREENFIELD(adapter->hw_dot_11n_dev_cap)) | |
| ht_info->cap |= IEEE80211_HT_CAP_GRN_FLD; | |
| else | |
| ht_info->cap &= ~IEEE80211_HT_CAP_GRN_FLD; | |
| if (ISENABLED_40MHZ_INTOLERANT(adapter->hw_dot_11n_dev_cap)) | |
| ht_info->cap |= IEEE80211_HT_CAP_40MHZ_INTOLERANT; | |
| else | |
| ht_info->cap &= ~IEEE80211_HT_CAP_40MHZ_INTOLERANT; | |
| if (ISSUPP_RXLDPC(adapter->hw_dot_11n_dev_cap)) | |
| ht_info->cap |= IEEE80211_HT_CAP_LDPC_CODING; | |
| else | |
| ht_info->cap &= ~IEEE80211_HT_CAP_LDPC_CODING; | |
| ht_info->cap &= ~IEEE80211_HT_CAP_MAX_AMSDU; | |
| ht_info->cap |= IEEE80211_HT_CAP_SM_PS; | |
| rx_mcs_supp = GET_RXMCSSUPP(adapter->user_dev_mcs_support); | |
| /* Set MCS for 1x1/2x2 */ | |
| memset(mcs, 0xff, rx_mcs_supp); | |
| /* Clear all the other values */ | |
| memset(&mcs[rx_mcs_supp], 0, | |
| sizeof(struct ieee80211_mcs_info) - rx_mcs_supp); | |
| if (priv->bss_mode == NL80211_IFTYPE_STATION || | |
| ISSUPP_CHANWIDTH40(adapter->hw_dot_11n_dev_cap)) | |
| /* Set MCS32 for infra mode or ad-hoc mode with 40MHz support */ | |
| SETHT_MCS32(mcs_set.rx_mask); | |
| memcpy((u8 *) &ht_info->mcs, mcs, sizeof(struct ieee80211_mcs_info)); | |
| ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED; | |
| } | |
| /* | |
| * create a new virtual interface with the given name and name assign type | |
| */ | |
| struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy, | |
| const char *name, | |
| unsigned char name_assign_type, | |
| enum nl80211_iftype type, | |
| u32 *flags, | |
| struct vif_params *params) | |
| { | |
| struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy); | |
| struct mwifiex_private *priv; | |
| struct net_device *dev; | |
| void *mdev_priv; | |
| int ret; | |
| if (!adapter) | |
| return ERR_PTR(-EFAULT); | |
| switch (type) { | |
| case NL80211_IFTYPE_UNSPECIFIED: | |
| case NL80211_IFTYPE_STATION: | |
| case NL80211_IFTYPE_ADHOC: | |
| if (adapter->curr_iface_comb.sta_intf == | |
| adapter->iface_limit.sta_intf) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "cannot create multiple sta/adhoc ifaces\n"); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| priv = mwifiex_get_unused_priv_by_bss_type( | |
| adapter, MWIFIEX_BSS_TYPE_STA); | |
| if (!priv) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "could not get free private struct\n"); | |
| return ERR_PTR(-EFAULT); | |
| } | |
| priv->wdev.wiphy = wiphy; | |
| priv->wdev.iftype = NL80211_IFTYPE_STATION; | |
| if (type == NL80211_IFTYPE_UNSPECIFIED) | |
| priv->bss_mode = NL80211_IFTYPE_STATION; | |
| else | |
| priv->bss_mode = type; | |
| priv->bss_type = MWIFIEX_BSS_TYPE_STA; | |
| priv->frame_type = MWIFIEX_DATA_FRAME_TYPE_ETH_II; | |
| priv->bss_priority = 0; | |
| priv->bss_role = MWIFIEX_BSS_ROLE_STA; | |
| break; | |
| case NL80211_IFTYPE_AP: | |
| if (adapter->curr_iface_comb.uap_intf == | |
| adapter->iface_limit.uap_intf) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "cannot create multiple AP ifaces\n"); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| priv = mwifiex_get_unused_priv_by_bss_type( | |
| adapter, MWIFIEX_BSS_TYPE_UAP); | |
| if (!priv) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "could not get free private struct\n"); | |
| return ERR_PTR(-EFAULT); | |
| } | |
| priv->wdev.wiphy = wiphy; | |
| priv->wdev.iftype = NL80211_IFTYPE_AP; | |
| priv->bss_type = MWIFIEX_BSS_TYPE_UAP; | |
| priv->frame_type = MWIFIEX_DATA_FRAME_TYPE_ETH_II; | |
| priv->bss_priority = 0; | |
| priv->bss_role = MWIFIEX_BSS_ROLE_UAP; | |
| priv->bss_started = 0; | |
| priv->bss_mode = type; | |
| break; | |
| case NL80211_IFTYPE_P2P_CLIENT: | |
| if (adapter->curr_iface_comb.p2p_intf == | |
| adapter->iface_limit.p2p_intf) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "cannot create multiple P2P ifaces\n"); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| priv = mwifiex_get_unused_priv_by_bss_type( | |
| adapter, MWIFIEX_BSS_TYPE_P2P); | |
| if (!priv) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "could not get free private struct\n"); | |
| return ERR_PTR(-EFAULT); | |
| } | |
| priv->wdev.wiphy = wiphy; | |
| /* At start-up, wpa_supplicant tries to change the interface | |
| * to NL80211_IFTYPE_STATION if it is not managed mode. | |
| */ | |
| priv->wdev.iftype = NL80211_IFTYPE_P2P_CLIENT; | |
| priv->bss_mode = NL80211_IFTYPE_P2P_CLIENT; | |
| /* Setting bss_type to P2P tells firmware that this interface | |
| * is receiving P2P peers found during find phase and doing | |
| * action frame handshake. | |
| */ | |
| priv->bss_type = MWIFIEX_BSS_TYPE_P2P; | |
| priv->frame_type = MWIFIEX_DATA_FRAME_TYPE_ETH_II; | |
| priv->bss_priority = MWIFIEX_BSS_ROLE_STA; | |
| priv->bss_role = MWIFIEX_BSS_ROLE_STA; | |
| priv->bss_started = 0; | |
| if (mwifiex_cfg80211_init_p2p_client(priv)) { | |
| memset(&priv->wdev, 0, sizeof(priv->wdev)); | |
| priv->wdev.iftype = NL80211_IFTYPE_UNSPECIFIED; | |
| return ERR_PTR(-EFAULT); | |
| } | |
| break; | |
| default: | |
| mwifiex_dbg(adapter, ERROR, "type not supported\n"); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| dev = alloc_netdev_mqs(sizeof(struct mwifiex_private *), name, | |
| name_assign_type, ether_setup, | |
| IEEE80211_NUM_ACS, 1); | |
| if (!dev) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "no memory available for netdevice\n"); | |
| memset(&priv->wdev, 0, sizeof(priv->wdev)); | |
| priv->wdev.iftype = NL80211_IFTYPE_UNSPECIFIED; | |
| priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED; | |
| return ERR_PTR(-ENOMEM); | |
| } | |
| mwifiex_init_priv_params(priv, dev); | |
| priv->netdev = dev; | |
| ret = mwifiex_send_cmd(priv, HostCmd_CMD_SET_BSS_MODE, | |
| HostCmd_ACT_GEN_SET, 0, NULL, true); | |
| if (ret) | |
| return ERR_PTR(ret); | |
| ret = mwifiex_sta_init_cmd(priv, false, false); | |
| if (ret) | |
| return ERR_PTR(ret); | |
| mwifiex_setup_ht_caps(&wiphy->bands[NL80211_BAND_2GHZ]->ht_cap, priv); | |
| if (adapter->is_hw_11ac_capable) | |
| mwifiex_setup_vht_caps( | |
| &wiphy->bands[NL80211_BAND_2GHZ]->vht_cap, priv); | |
| if (adapter->config_bands & BAND_A) | |
| mwifiex_setup_ht_caps( | |
| &wiphy->bands[NL80211_BAND_5GHZ]->ht_cap, priv); | |
| if ((adapter->config_bands & BAND_A) && adapter->is_hw_11ac_capable) | |
| mwifiex_setup_vht_caps( | |
| &wiphy->bands[NL80211_BAND_5GHZ]->vht_cap, priv); | |
| dev_net_set(dev, wiphy_net(wiphy)); | |
| dev->ieee80211_ptr = &priv->wdev; | |
| dev->ieee80211_ptr->iftype = priv->bss_mode; | |
| memcpy(dev->dev_addr, wiphy->perm_addr, ETH_ALEN); | |
| SET_NETDEV_DEV(dev, wiphy_dev(wiphy)); | |
| dev->flags |= IFF_BROADCAST | IFF_MULTICAST; | |
| dev->watchdog_timeo = MWIFIEX_DEFAULT_WATCHDOG_TIMEOUT; | |
| dev->hard_header_len += MWIFIEX_MIN_DATA_HEADER_LEN; | |
| dev->ethtool_ops = &mwifiex_ethtool_ops; | |
| mdev_priv = netdev_priv(dev); | |
| *((unsigned long *) mdev_priv) = (unsigned long) priv; | |
| SET_NETDEV_DEV(dev, adapter->dev); | |
| /* Register network device */ | |
| if (register_netdevice(dev)) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "cannot register virtual network device\n"); | |
| free_netdev(dev); | |
| priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED; | |
| priv->netdev = NULL; | |
| memset(&priv->wdev, 0, sizeof(priv->wdev)); | |
| priv->wdev.iftype = NL80211_IFTYPE_UNSPECIFIED; | |
| return ERR_PTR(-EFAULT); | |
| } | |
| priv->dfs_cac_workqueue = alloc_workqueue("MWIFIEX_DFS_CAC%s", | |
| WQ_HIGHPRI | | |
| WQ_MEM_RECLAIM | | |
| WQ_UNBOUND, 1, name); | |
| if (!priv->dfs_cac_workqueue) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "cannot register virtual network device\n"); | |
| free_netdev(dev); | |
| priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED; | |
| priv->netdev = NULL; | |
| memset(&priv->wdev, 0, sizeof(priv->wdev)); | |
| priv->wdev.iftype = NL80211_IFTYPE_UNSPECIFIED; | |
| return ERR_PTR(-ENOMEM); | |
| } | |
| INIT_DELAYED_WORK(&priv->dfs_cac_work, mwifiex_dfs_cac_work_queue); | |
| priv->dfs_chan_sw_workqueue = alloc_workqueue("MWIFIEX_DFS_CHSW%s", | |
| WQ_HIGHPRI | WQ_UNBOUND | | |
| WQ_MEM_RECLAIM, 1, name); | |
| if (!priv->dfs_chan_sw_workqueue) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "cannot register virtual network device\n"); | |
| free_netdev(dev); | |
| priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED; | |
| priv->netdev = NULL; | |
| memset(&priv->wdev, 0, sizeof(priv->wdev)); | |
| priv->wdev.iftype = NL80211_IFTYPE_UNSPECIFIED; | |
| return ERR_PTR(-ENOMEM); | |
| } | |
| INIT_DELAYED_WORK(&priv->dfs_chan_sw_work, | |
| mwifiex_dfs_chan_sw_work_queue); | |
| sema_init(&priv->async_sem, 1); | |
| mwifiex_dbg(adapter, INFO, | |
| "info: %s: Marvell 802.11 Adapter\n", dev->name); | |
| #ifdef CONFIG_DEBUG_FS | |
| mwifiex_dev_debugfs_init(priv); | |
| #endif | |
| switch (type) { | |
| case NL80211_IFTYPE_UNSPECIFIED: | |
| case NL80211_IFTYPE_STATION: | |
| case NL80211_IFTYPE_ADHOC: | |
| adapter->curr_iface_comb.sta_intf++; | |
| break; | |
| case NL80211_IFTYPE_AP: | |
| adapter->curr_iface_comb.uap_intf++; | |
| break; | |
| case NL80211_IFTYPE_P2P_CLIENT: | |
| adapter->curr_iface_comb.p2p_intf++; | |
| break; | |
| default: | |
| mwifiex_dbg(adapter, ERROR, "type not supported\n"); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| return &priv->wdev; | |
| } | |
| EXPORT_SYMBOL_GPL(mwifiex_add_virtual_intf); | |
| /* | |
| * del_virtual_intf: remove the virtual interface determined by dev | |
| */ | |
| int mwifiex_del_virtual_intf(struct wiphy *wiphy, struct wireless_dev *wdev) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(wdev->netdev); | |
| struct mwifiex_adapter *adapter = priv->adapter; | |
| struct sk_buff *skb, *tmp; | |
| #ifdef CONFIG_DEBUG_FS | |
| mwifiex_dev_debugfs_remove(priv); | |
| #endif | |
| if (priv->sched_scanning) | |
| priv->sched_scanning = false; | |
| mwifiex_stop_net_dev_queue(priv->netdev, adapter); | |
| skb_queue_walk_safe(&priv->bypass_txq, skb, tmp) | |
| mwifiex_write_data_complete(priv->adapter, skb, 0, -1); | |
| if (netif_carrier_ok(priv->netdev)) | |
| netif_carrier_off(priv->netdev); | |
| if (wdev->netdev->reg_state == NETREG_REGISTERED) | |
| unregister_netdevice(wdev->netdev); | |
| if (priv->dfs_cac_workqueue) { | |
| flush_workqueue(priv->dfs_cac_workqueue); | |
| destroy_workqueue(priv->dfs_cac_workqueue); | |
| priv->dfs_cac_workqueue = NULL; | |
| } | |
| if (priv->dfs_chan_sw_workqueue) { | |
| flush_workqueue(priv->dfs_chan_sw_workqueue); | |
| destroy_workqueue(priv->dfs_chan_sw_workqueue); | |
| priv->dfs_chan_sw_workqueue = NULL; | |
| } | |
| /* Clear the priv in adapter */ | |
| priv->netdev->ieee80211_ptr = NULL; | |
| priv->netdev = NULL; | |
| priv->wdev.iftype = NL80211_IFTYPE_UNSPECIFIED; | |
| priv->media_connected = false; | |
| switch (priv->bss_mode) { | |
| case NL80211_IFTYPE_UNSPECIFIED: | |
| case NL80211_IFTYPE_STATION: | |
| case NL80211_IFTYPE_ADHOC: | |
| adapter->curr_iface_comb.sta_intf--; | |
| break; | |
| case NL80211_IFTYPE_AP: | |
| adapter->curr_iface_comb.uap_intf--; | |
| break; | |
| case NL80211_IFTYPE_P2P_CLIENT: | |
| case NL80211_IFTYPE_P2P_GO: | |
| adapter->curr_iface_comb.p2p_intf--; | |
| break; | |
| default: | |
| mwifiex_dbg(adapter, ERROR, | |
| "del_virtual_intf: type not supported\n"); | |
| break; | |
| } | |
| priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED; | |
| if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA || | |
| GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_UAP) | |
| kfree(priv->hist_data); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(mwifiex_del_virtual_intf); | |
| static bool | |
| mwifiex_is_pattern_supported(struct cfg80211_pkt_pattern *pat, s8 *byte_seq, | |
| u8 max_byte_seq) | |
| { | |
| int j, k, valid_byte_cnt = 0; | |
| bool dont_care_byte = false; | |
| for (j = 0; j < DIV_ROUND_UP(pat->pattern_len, 8); j++) { | |
| for (k = 0; k < 8; k++) { | |
| if (pat->mask[j] & 1 << k) { | |
| memcpy(byte_seq + valid_byte_cnt, | |
| &pat->pattern[j * 8 + k], 1); | |
| valid_byte_cnt++; | |
| if (dont_care_byte) | |
| return false; | |
| } else { | |
| if (valid_byte_cnt) | |
| dont_care_byte = true; | |
| } | |
| /* wildcard bytes record as the offset | |
| * before the valid byte | |
| */ | |
| if (!valid_byte_cnt && !dont_care_byte) | |
| pat->pkt_offset++; | |
| if (valid_byte_cnt > max_byte_seq) | |
| return false; | |
| } | |
| } | |
| byte_seq[max_byte_seq] = valid_byte_cnt; | |
| return true; | |
| } | |
| #ifdef CONFIG_PM | |
| static void mwifiex_set_auto_arp_mef_entry(struct mwifiex_private *priv, | |
| struct mwifiex_mef_entry *mef_entry) | |
| { | |
| int i, filt_num = 0, num_ipv4 = 0; | |
| struct in_device *in_dev; | |
| struct in_ifaddr *ifa; | |
| __be32 ips[MWIFIEX_MAX_SUPPORTED_IPADDR]; | |
| struct mwifiex_adapter *adapter = priv->adapter; | |
| mef_entry->mode = MEF_MODE_HOST_SLEEP; | |
| mef_entry->action = MEF_ACTION_AUTO_ARP; | |
| /* Enable ARP offload feature */ | |
| memset(ips, 0, sizeof(ips)); | |
| for (i = 0; i < MWIFIEX_MAX_BSS_NUM; i++) { | |
| if (adapter->priv[i]->netdev) { | |
| in_dev = __in_dev_get_rtnl(adapter->priv[i]->netdev); | |
| if (!in_dev) | |
| continue; | |
| ifa = in_dev->ifa_list; | |
| if (!ifa || !ifa->ifa_local) | |
| continue; | |
| ips[i] = ifa->ifa_local; | |
| num_ipv4++; | |
| } | |
| } | |
| for (i = 0; i < num_ipv4; i++) { | |
| if (!ips[i]) | |
| continue; | |
| mef_entry->filter[filt_num].repeat = 1; | |
| memcpy(mef_entry->filter[filt_num].byte_seq, | |
| (u8 *)&ips[i], sizeof(ips[i])); | |
| mef_entry->filter[filt_num]. | |
| byte_seq[MWIFIEX_MEF_MAX_BYTESEQ] = | |
| sizeof(ips[i]); | |
| mef_entry->filter[filt_num].offset = 46; | |
| mef_entry->filter[filt_num].filt_type = TYPE_EQ; | |
| if (filt_num) { | |
| mef_entry->filter[filt_num].filt_action = | |
| TYPE_OR; | |
| } | |
| filt_num++; | |
| } | |
| mef_entry->filter[filt_num].repeat = 1; | |
| mef_entry->filter[filt_num].byte_seq[0] = 0x08; | |
| mef_entry->filter[filt_num].byte_seq[1] = 0x06; | |
| mef_entry->filter[filt_num].byte_seq[MWIFIEX_MEF_MAX_BYTESEQ] = 2; | |
| mef_entry->filter[filt_num].offset = 20; | |
| mef_entry->filter[filt_num].filt_type = TYPE_EQ; | |
| mef_entry->filter[filt_num].filt_action = TYPE_AND; | |
| } | |
| static int mwifiex_set_wowlan_mef_entry(struct mwifiex_private *priv, | |
| struct mwifiex_ds_mef_cfg *mef_cfg, | |
| struct mwifiex_mef_entry *mef_entry, | |
| struct cfg80211_wowlan *wowlan) | |
| { | |
| int i, filt_num = 0, ret = 0; | |
| bool first_pat = true; | |
| u8 byte_seq[MWIFIEX_MEF_MAX_BYTESEQ + 1]; | |
| const u8 ipv4_mc_mac[] = {0x33, 0x33}; | |
| const u8 ipv6_mc_mac[] = {0x01, 0x00, 0x5e}; | |
| mef_entry->mode = MEF_MODE_HOST_SLEEP; | |
| mef_entry->action = MEF_ACTION_ALLOW_AND_WAKEUP_HOST; | |
| for (i = 0; i < wowlan->n_patterns; i++) { | |
| memset(byte_seq, 0, sizeof(byte_seq)); | |
| if (!mwifiex_is_pattern_supported(&wowlan->patterns[i], | |
| byte_seq, | |
| MWIFIEX_MEF_MAX_BYTESEQ)) { | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "Pattern not supported\n"); | |
| return -EOPNOTSUPP; | |
| } | |
| if (!wowlan->patterns[i].pkt_offset) { | |
| if (!(byte_seq[0] & 0x01) && | |
| (byte_seq[MWIFIEX_MEF_MAX_BYTESEQ] == 1)) { | |
| mef_cfg->criteria |= MWIFIEX_CRITERIA_UNICAST; | |
| continue; | |
| } else if (is_broadcast_ether_addr(byte_seq)) { | |
| mef_cfg->criteria |= MWIFIEX_CRITERIA_BROADCAST; | |
| continue; | |
| } else if ((!memcmp(byte_seq, ipv4_mc_mac, 2) && | |
| (byte_seq[MWIFIEX_MEF_MAX_BYTESEQ] == 2)) || | |
| (!memcmp(byte_seq, ipv6_mc_mac, 3) && | |
| (byte_seq[MWIFIEX_MEF_MAX_BYTESEQ] == 3))) { | |
| mef_cfg->criteria |= MWIFIEX_CRITERIA_MULTICAST; | |
| continue; | |
| } | |
| } | |
| mef_entry->filter[filt_num].repeat = 1; | |
| mef_entry->filter[filt_num].offset = | |
| wowlan->patterns[i].pkt_offset; | |
| memcpy(mef_entry->filter[filt_num].byte_seq, byte_seq, | |
| sizeof(byte_seq)); | |
| mef_entry->filter[filt_num].filt_type = TYPE_EQ; | |
| if (first_pat) { | |
| first_pat = false; | |
| mwifiex_dbg(priv->adapter, INFO, "Wake on patterns\n"); | |
| } else { | |
| mef_entry->filter[filt_num].filt_action = TYPE_AND; | |
| } | |
| filt_num++; | |
| } | |
| if (wowlan->magic_pkt) { | |
| mef_cfg->criteria |= MWIFIEX_CRITERIA_UNICAST; | |
| mef_entry->filter[filt_num].repeat = 16; | |
| memcpy(mef_entry->filter[filt_num].byte_seq, priv->curr_addr, | |
| ETH_ALEN); | |
| mef_entry->filter[filt_num].byte_seq[MWIFIEX_MEF_MAX_BYTESEQ] = | |
| ETH_ALEN; | |
| mef_entry->filter[filt_num].offset = 28; | |
| mef_entry->filter[filt_num].filt_type = TYPE_EQ; | |
| if (filt_num) | |
| mef_entry->filter[filt_num].filt_action = TYPE_OR; | |
| filt_num++; | |
| mef_entry->filter[filt_num].repeat = 16; | |
| memcpy(mef_entry->filter[filt_num].byte_seq, priv->curr_addr, | |
| ETH_ALEN); | |
| mef_entry->filter[filt_num].byte_seq[MWIFIEX_MEF_MAX_BYTESEQ] = | |
| ETH_ALEN; | |
| mef_entry->filter[filt_num].offset = 56; | |
| mef_entry->filter[filt_num].filt_type = TYPE_EQ; | |
| mef_entry->filter[filt_num].filt_action = TYPE_OR; | |
| mwifiex_dbg(priv->adapter, INFO, "Wake on magic packet\n"); | |
| } | |
| return ret; | |
| } | |
| static int mwifiex_set_mef_filter(struct mwifiex_private *priv, | |
| struct cfg80211_wowlan *wowlan) | |
| { | |
| int ret = 0, num_entries = 1; | |
| struct mwifiex_ds_mef_cfg mef_cfg; | |
| struct mwifiex_mef_entry *mef_entry; | |
| if (wowlan->n_patterns || wowlan->magic_pkt) | |
| num_entries++; | |
| mef_entry = kcalloc(num_entries, sizeof(*mef_entry), GFP_KERNEL); | |
| if (!mef_entry) | |
| return -ENOMEM; | |
| memset(&mef_cfg, 0, sizeof(mef_cfg)); | |
| mef_cfg.criteria |= MWIFIEX_CRITERIA_BROADCAST | | |
| MWIFIEX_CRITERIA_UNICAST; | |
| mef_cfg.num_entries = num_entries; | |
| mef_cfg.mef_entry = mef_entry; | |
| mwifiex_set_auto_arp_mef_entry(priv, &mef_entry[0]); | |
| if (wowlan->n_patterns || wowlan->magic_pkt) { | |
| ret = mwifiex_set_wowlan_mef_entry(priv, &mef_cfg, | |
| &mef_entry[1], wowlan); | |
| if (ret) | |
| goto err; | |
| } | |
| if (!mef_cfg.criteria) | |
| mef_cfg.criteria = MWIFIEX_CRITERIA_BROADCAST | | |
| MWIFIEX_CRITERIA_UNICAST | | |
| MWIFIEX_CRITERIA_MULTICAST; | |
| ret = mwifiex_send_cmd(priv, HostCmd_CMD_MEF_CFG, | |
| HostCmd_ACT_GEN_SET, 0, | |
| &mef_cfg, true); | |
| err: | |
| kfree(mef_entry); | |
| return ret; | |
| } | |
| static int mwifiex_cfg80211_suspend(struct wiphy *wiphy, | |
| struct cfg80211_wowlan *wowlan) | |
| { | |
| struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy); | |
| struct mwifiex_ds_hs_cfg hs_cfg; | |
| int i, ret = 0, retry_num = 10; | |
| struct mwifiex_private *priv; | |
| struct mwifiex_private *sta_priv = | |
| mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA); | |
| sta_priv->scan_aborting = true; | |
| for (i = 0; i < adapter->priv_num; i++) { | |
| priv = adapter->priv[i]; | |
| mwifiex_abort_cac(priv); | |
| } | |
| mwifiex_cancel_all_pending_cmd(adapter); | |
| for (i = 0; i < adapter->priv_num; i++) { | |
| priv = adapter->priv[i]; | |
| if (priv && priv->netdev) { | |
| mwifiex_stop_net_dev_queue(priv->netdev, adapter); | |
| if (netif_carrier_ok(priv->netdev)) | |
| netif_carrier_off(priv->netdev); | |
| } | |
| } | |
| for (i = 0; i < retry_num; i++) { | |
| if (!mwifiex_wmm_lists_empty(adapter) || | |
| !mwifiex_bypass_txlist_empty(adapter) || | |
| !skb_queue_empty(&adapter->tx_data_q)) | |
| usleep_range(10000, 15000); | |
| else | |
| break; | |
| } | |
| if (!wowlan) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "None of the WOWLAN triggers enabled\n"); | |
| ret = 0; | |
| goto done; | |
| } | |
| if (!sta_priv->media_connected && !wowlan->nd_config) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "Can not configure WOWLAN in disconnected state\n"); | |
| ret = 0; | |
| goto done; | |
| } | |
| ret = mwifiex_set_mef_filter(sta_priv, wowlan); | |
| if (ret) { | |
| mwifiex_dbg(adapter, ERROR, "Failed to set MEF filter\n"); | |
| goto done; | |
| } | |
| memset(&hs_cfg, 0, sizeof(hs_cfg)); | |
| hs_cfg.conditions = le32_to_cpu(adapter->hs_cfg.conditions); | |
| if (wowlan->nd_config) { | |
| mwifiex_dbg(adapter, INFO, "Wake on net detect\n"); | |
| hs_cfg.conditions |= HS_CFG_COND_MAC_EVENT; | |
| mwifiex_cfg80211_sched_scan_start(wiphy, sta_priv->netdev, | |
| wowlan->nd_config); | |
| } | |
| if (wowlan->disconnect) { | |
| hs_cfg.conditions |= HS_CFG_COND_MAC_EVENT; | |
| mwifiex_dbg(sta_priv->adapter, INFO, "Wake on device disconnect\n"); | |
| } | |
| hs_cfg.is_invoke_hostcmd = false; | |
| hs_cfg.gpio = adapter->hs_cfg.gpio; | |
| hs_cfg.gap = adapter->hs_cfg.gap; | |
| ret = mwifiex_set_hs_params(sta_priv, HostCmd_ACT_GEN_SET, | |
| MWIFIEX_SYNC_CMD, &hs_cfg); | |
| if (ret) | |
| mwifiex_dbg(adapter, ERROR, "Failed to set HS params\n"); | |
| done: | |
| sta_priv->scan_aborting = false; | |
| return ret; | |
| } | |
| static int mwifiex_cfg80211_resume(struct wiphy *wiphy) | |
| { | |
| struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy); | |
| struct mwifiex_private *priv; | |
| struct mwifiex_ds_wakeup_reason wakeup_reason; | |
| struct cfg80211_wowlan_wakeup wakeup_report; | |
| int i; | |
| bool report_wakeup_reason = true; | |
| for (i = 0; i < adapter->priv_num; i++) { | |
| priv = adapter->priv[i]; | |
| if (priv && priv->netdev) { | |
| if (!netif_carrier_ok(priv->netdev)) | |
| netif_carrier_on(priv->netdev); | |
| mwifiex_wake_up_net_dev_queue(priv->netdev, adapter); | |
| } | |
| } | |
| if (!wiphy->wowlan_config) | |
| goto done; | |
| priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA); | |
| mwifiex_get_wakeup_reason(priv, HostCmd_ACT_GEN_GET, MWIFIEX_SYNC_CMD, | |
| &wakeup_reason); | |
| memset(&wakeup_report, 0, sizeof(struct cfg80211_wowlan_wakeup)); | |
| wakeup_report.pattern_idx = -1; | |
| switch (wakeup_reason.hs_wakeup_reason) { | |
| case NO_HSWAKEUP_REASON: | |
| break; | |
| case BCAST_DATA_MATCHED: | |
| break; | |
| case MCAST_DATA_MATCHED: | |
| break; | |
| case UCAST_DATA_MATCHED: | |
| break; | |
| case MASKTABLE_EVENT_MATCHED: | |
| break; | |
| case NON_MASKABLE_EVENT_MATCHED: | |
| if (wiphy->wowlan_config->disconnect) | |
| wakeup_report.disconnect = true; | |
| if (wiphy->wowlan_config->nd_config) | |
| wakeup_report.net_detect = adapter->nd_info; | |
| break; | |
| case NON_MASKABLE_CONDITION_MATCHED: | |
| break; | |
| case MAGIC_PATTERN_MATCHED: | |
| if (wiphy->wowlan_config->magic_pkt) | |
| wakeup_report.magic_pkt = true; | |
| if (wiphy->wowlan_config->n_patterns) | |
| wakeup_report.pattern_idx = 1; | |
| break; | |
| case GTK_REKEY_FAILURE: | |
| if (wiphy->wowlan_config->gtk_rekey_failure) | |
| wakeup_report.gtk_rekey_failure = true; | |
| break; | |
| default: | |
| report_wakeup_reason = false; | |
| break; | |
| } | |
| if (report_wakeup_reason) | |
| cfg80211_report_wowlan_wakeup(&priv->wdev, &wakeup_report, | |
| GFP_KERNEL); | |
| done: | |
| if (adapter->nd_info) { | |
| for (i = 0 ; i < adapter->nd_info->n_matches ; i++) | |
| kfree(adapter->nd_info->matches[i]); | |
| kfree(adapter->nd_info); | |
| adapter->nd_info = NULL; | |
| } | |
| return 0; | |
| } | |
| static void mwifiex_cfg80211_set_wakeup(struct wiphy *wiphy, | |
| bool enabled) | |
| { | |
| struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy); | |
| device_set_wakeup_enable(adapter->dev, enabled); | |
| } | |
| static int mwifiex_set_rekey_data(struct wiphy *wiphy, struct net_device *dev, | |
| struct cfg80211_gtk_rekey_data *data) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| return mwifiex_send_cmd(priv, HostCmd_CMD_GTK_REKEY_OFFLOAD_CFG, | |
| HostCmd_ACT_GEN_SET, 0, data, true); | |
| } | |
| #endif | |
| static int mwifiex_get_coalesce_pkt_type(u8 *byte_seq) | |
| { | |
| const u8 ipv4_mc_mac[] = {0x33, 0x33}; | |
| const u8 ipv6_mc_mac[] = {0x01, 0x00, 0x5e}; | |
| const u8 bc_mac[] = {0xff, 0xff, 0xff, 0xff}; | |
| if ((byte_seq[0] & 0x01) && | |
| (byte_seq[MWIFIEX_COALESCE_MAX_BYTESEQ] == 1)) | |
| return PACKET_TYPE_UNICAST; | |
| else if (!memcmp(byte_seq, bc_mac, 4)) | |
| return PACKET_TYPE_BROADCAST; | |
| else if ((!memcmp(byte_seq, ipv4_mc_mac, 2) && | |
| byte_seq[MWIFIEX_COALESCE_MAX_BYTESEQ] == 2) || | |
| (!memcmp(byte_seq, ipv6_mc_mac, 3) && | |
| byte_seq[MWIFIEX_COALESCE_MAX_BYTESEQ] == 3)) | |
| return PACKET_TYPE_MULTICAST; | |
| return 0; | |
| } | |
| static int | |
| mwifiex_fill_coalesce_rule_info(struct mwifiex_private *priv, | |
| struct cfg80211_coalesce_rules *crule, | |
| struct mwifiex_coalesce_rule *mrule) | |
| { | |
| u8 byte_seq[MWIFIEX_COALESCE_MAX_BYTESEQ + 1]; | |
| struct filt_field_param *param; | |
| int i; | |
| mrule->max_coalescing_delay = crule->delay; | |
| param = mrule->params; | |
| for (i = 0; i < crule->n_patterns; i++) { | |
| memset(byte_seq, 0, sizeof(byte_seq)); | |
| if (!mwifiex_is_pattern_supported(&crule->patterns[i], | |
| byte_seq, | |
| MWIFIEX_COALESCE_MAX_BYTESEQ)) { | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "Pattern not supported\n"); | |
| return -EOPNOTSUPP; | |
| } | |
| if (!crule->patterns[i].pkt_offset) { | |
| u8 pkt_type; | |
| pkt_type = mwifiex_get_coalesce_pkt_type(byte_seq); | |
| if (pkt_type && mrule->pkt_type) { | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "Multiple packet types not allowed\n"); | |
| return -EOPNOTSUPP; | |
| } else if (pkt_type) { | |
| mrule->pkt_type = pkt_type; | |
| continue; | |
| } | |
| } | |
| if (crule->condition == NL80211_COALESCE_CONDITION_MATCH) | |
| param->operation = RECV_FILTER_MATCH_TYPE_EQ; | |
| else | |
| param->operation = RECV_FILTER_MATCH_TYPE_NE; | |
| param->operand_len = byte_seq[MWIFIEX_COALESCE_MAX_BYTESEQ]; | |
| memcpy(param->operand_byte_stream, byte_seq, | |
| param->operand_len); | |
| param->offset = crule->patterns[i].pkt_offset; | |
| param++; | |
| mrule->num_of_fields++; | |
| } | |
| if (!mrule->pkt_type) { | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "Packet type can not be determined\n"); | |
| return -EOPNOTSUPP; | |
| } | |
| return 0; | |
| } | |
| static int mwifiex_cfg80211_set_coalesce(struct wiphy *wiphy, | |
| struct cfg80211_coalesce *coalesce) | |
| { | |
| struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy); | |
| int i, ret; | |
| struct mwifiex_ds_coalesce_cfg coalesce_cfg; | |
| struct mwifiex_private *priv = | |
| mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA); | |
| memset(&coalesce_cfg, 0, sizeof(coalesce_cfg)); | |
| if (!coalesce) { | |
| mwifiex_dbg(adapter, WARN, | |
| "Disable coalesce and reset all previous rules\n"); | |
| return mwifiex_send_cmd(priv, HostCmd_CMD_COALESCE_CFG, | |
| HostCmd_ACT_GEN_SET, 0, | |
| &coalesce_cfg, true); | |
| } | |
| coalesce_cfg.num_of_rules = coalesce->n_rules; | |
| for (i = 0; i < coalesce->n_rules; i++) { | |
| ret = mwifiex_fill_coalesce_rule_info(priv, &coalesce->rules[i], | |
| &coalesce_cfg.rule[i]); | |
| if (ret) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "Recheck the patterns provided for rule %d\n", | |
| i + 1); | |
| return ret; | |
| } | |
| } | |
| return mwifiex_send_cmd(priv, HostCmd_CMD_COALESCE_CFG, | |
| HostCmd_ACT_GEN_SET, 0, &coalesce_cfg, true); | |
| } | |
| /* cfg80211 ops handler for tdls_mgmt. | |
| * Function prepares TDLS action frame packets and forwards them to FW | |
| */ | |
| static int | |
| mwifiex_cfg80211_tdls_mgmt(struct wiphy *wiphy, struct net_device *dev, | |
| const u8 *peer, u8 action_code, u8 dialog_token, | |
| u16 status_code, u32 peer_capability, | |
| bool initiator, const u8 *extra_ies, | |
| size_t extra_ies_len) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| int ret; | |
| if (!(wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS)) | |
| return -ENOTSUPP; | |
| /* make sure we are in station mode and connected */ | |
| if (!(priv->bss_type == MWIFIEX_BSS_TYPE_STA && priv->media_connected)) | |
| return -ENOTSUPP; | |
| switch (action_code) { | |
| case WLAN_TDLS_SETUP_REQUEST: | |
| mwifiex_dbg(priv->adapter, MSG, | |
| "Send TDLS Setup Request to %pM status_code=%d\n", | |
| peer, status_code); | |
| mwifiex_add_auto_tdls_peer(priv, peer); | |
| ret = mwifiex_send_tdls_data_frame(priv, peer, action_code, | |
| dialog_token, status_code, | |
| extra_ies, extra_ies_len); | |
| break; | |
| case WLAN_TDLS_SETUP_RESPONSE: | |
| mwifiex_add_auto_tdls_peer(priv, peer); | |
| mwifiex_dbg(priv->adapter, MSG, | |
| "Send TDLS Setup Response to %pM status_code=%d\n", | |
| peer, status_code); | |
| ret = mwifiex_send_tdls_data_frame(priv, peer, action_code, | |
| dialog_token, status_code, | |
| extra_ies, extra_ies_len); | |
| break; | |
| case WLAN_TDLS_SETUP_CONFIRM: | |
| mwifiex_dbg(priv->adapter, MSG, | |
| "Send TDLS Confirm to %pM status_code=%d\n", peer, | |
| status_code); | |
| ret = mwifiex_send_tdls_data_frame(priv, peer, action_code, | |
| dialog_token, status_code, | |
| extra_ies, extra_ies_len); | |
| break; | |
| case WLAN_TDLS_TEARDOWN: | |
| mwifiex_dbg(priv->adapter, MSG, | |
| "Send TDLS Tear down to %pM\n", peer); | |
| ret = mwifiex_send_tdls_data_frame(priv, peer, action_code, | |
| dialog_token, status_code, | |
| extra_ies, extra_ies_len); | |
| break; | |
| case WLAN_TDLS_DISCOVERY_REQUEST: | |
| mwifiex_dbg(priv->adapter, MSG, | |
| "Send TDLS Discovery Request to %pM\n", peer); | |
| ret = mwifiex_send_tdls_data_frame(priv, peer, action_code, | |
| dialog_token, status_code, | |
| extra_ies, extra_ies_len); | |
| break; | |
| case WLAN_PUB_ACTION_TDLS_DISCOVER_RES: | |
| mwifiex_dbg(priv->adapter, MSG, | |
| "Send TDLS Discovery Response to %pM\n", peer); | |
| ret = mwifiex_send_tdls_action_frame(priv, peer, action_code, | |
| dialog_token, status_code, | |
| extra_ies, extra_ies_len); | |
| break; | |
| default: | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "Unknown TDLS mgmt/action frame %pM\n", peer); | |
| ret = -EINVAL; | |
| break; | |
| } | |
| return ret; | |
| } | |
| static int | |
| mwifiex_cfg80211_tdls_oper(struct wiphy *wiphy, struct net_device *dev, | |
| const u8 *peer, enum nl80211_tdls_operation action) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| if (!(wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS) || | |
| !(wiphy->flags & WIPHY_FLAG_TDLS_EXTERNAL_SETUP)) | |
| return -ENOTSUPP; | |
| /* make sure we are in station mode and connected */ | |
| if (!(priv->bss_type == MWIFIEX_BSS_TYPE_STA && priv->media_connected)) | |
| return -ENOTSUPP; | |
| mwifiex_dbg(priv->adapter, MSG, | |
| "TDLS peer=%pM, oper=%d\n", peer, action); | |
| switch (action) { | |
| case NL80211_TDLS_ENABLE_LINK: | |
| action = MWIFIEX_TDLS_ENABLE_LINK; | |
| break; | |
| case NL80211_TDLS_DISABLE_LINK: | |
| action = MWIFIEX_TDLS_DISABLE_LINK; | |
| break; | |
| case NL80211_TDLS_TEARDOWN: | |
| /* shouldn't happen!*/ | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "tdls_oper: teardown from driver not supported\n"); | |
| return -EINVAL; | |
| case NL80211_TDLS_SETUP: | |
| /* shouldn't happen!*/ | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "tdls_oper: setup from driver not supported\n"); | |
| return -EINVAL; | |
| case NL80211_TDLS_DISCOVERY_REQ: | |
| /* shouldn't happen!*/ | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "tdls_oper: discovery from driver not supported\n"); | |
| return -EINVAL; | |
| default: | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "tdls_oper: operation not supported\n"); | |
| return -ENOTSUPP; | |
| } | |
| return mwifiex_tdls_oper(priv, peer, action); | |
| } | |
| static int | |
| mwifiex_cfg80211_tdls_chan_switch(struct wiphy *wiphy, struct net_device *dev, | |
| const u8 *addr, u8 oper_class, | |
| struct cfg80211_chan_def *chandef) | |
| { | |
| struct mwifiex_sta_node *sta_ptr; | |
| unsigned long flags; | |
| u16 chan; | |
| u8 second_chan_offset, band; | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| spin_lock_irqsave(&priv->sta_list_spinlock, flags); | |
| sta_ptr = mwifiex_get_sta_entry(priv, addr); | |
| spin_unlock_irqrestore(&priv->sta_list_spinlock, flags); | |
| if (!sta_ptr) { | |
| wiphy_err(wiphy, "%s: Invalid TDLS peer %pM\n", | |
| __func__, addr); | |
| return -ENOENT; | |
| } | |
| if (!(sta_ptr->tdls_cap.extcap.ext_capab[3] & | |
| WLAN_EXT_CAPA4_TDLS_CHAN_SWITCH)) { | |
| wiphy_err(wiphy, "%pM do not support tdls cs\n", addr); | |
| return -ENOENT; | |
| } | |
| if (sta_ptr->tdls_status == TDLS_CHAN_SWITCHING || | |
| sta_ptr->tdls_status == TDLS_IN_OFF_CHAN) { | |
| wiphy_err(wiphy, "channel switch is running, abort request\n"); | |
| return -EALREADY; | |
| } | |
| chan = chandef->chan->hw_value; | |
| second_chan_offset = mwifiex_get_sec_chan_offset(chan); | |
| band = chandef->chan->band; | |
| mwifiex_start_tdls_cs(priv, addr, chan, second_chan_offset, band); | |
| return 0; | |
| } | |
| static void | |
| mwifiex_cfg80211_tdls_cancel_chan_switch(struct wiphy *wiphy, | |
| struct net_device *dev, | |
| const u8 *addr) | |
| { | |
| struct mwifiex_sta_node *sta_ptr; | |
| unsigned long flags; | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| spin_lock_irqsave(&priv->sta_list_spinlock, flags); | |
| sta_ptr = mwifiex_get_sta_entry(priv, addr); | |
| spin_unlock_irqrestore(&priv->sta_list_spinlock, flags); | |
| if (!sta_ptr) { | |
| wiphy_err(wiphy, "%s: Invalid TDLS peer %pM\n", | |
| __func__, addr); | |
| } else if (!(sta_ptr->tdls_status == TDLS_CHAN_SWITCHING || | |
| sta_ptr->tdls_status == TDLS_IN_BASE_CHAN || | |
| sta_ptr->tdls_status == TDLS_IN_OFF_CHAN)) { | |
| wiphy_err(wiphy, "tdls chan switch not initialize by %pM\n", | |
| addr); | |
| } else | |
| mwifiex_stop_tdls_cs(priv, addr); | |
| } | |
| static int | |
| mwifiex_cfg80211_add_station(struct wiphy *wiphy, struct net_device *dev, | |
| const u8 *mac, struct station_parameters *params) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| if (!(params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER))) | |
| return -ENOTSUPP; | |
| /* make sure we are in station mode and connected */ | |
| if ((priv->bss_type != MWIFIEX_BSS_TYPE_STA) || !priv->media_connected) | |
| return -ENOTSUPP; | |
| return mwifiex_tdls_oper(priv, mac, MWIFIEX_TDLS_CREATE_LINK); | |
| } | |
| static int | |
| mwifiex_cfg80211_channel_switch(struct wiphy *wiphy, struct net_device *dev, | |
| struct cfg80211_csa_settings *params) | |
| { | |
| struct ieee_types_header *chsw_ie; | |
| struct ieee80211_channel_sw_ie *channel_sw; | |
| int chsw_msec; | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| if (priv->adapter->scan_processing) { | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "radar detection: scan in process...\n"); | |
| return -EBUSY; | |
| } | |
| if (priv->wdev.cac_started) | |
| return -EBUSY; | |
| if (cfg80211_chandef_identical(¶ms->chandef, | |
| &priv->dfs_chandef)) | |
| return -EINVAL; | |
| chsw_ie = (void *)cfg80211_find_ie(WLAN_EID_CHANNEL_SWITCH, | |
| params->beacon_csa.tail, | |
| params->beacon_csa.tail_len); | |
| if (!chsw_ie) { | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "Could not parse channel switch announcement IE\n"); | |
| return -EINVAL; | |
| } | |
| channel_sw = (void *)(chsw_ie + 1); | |
| if (channel_sw->mode) { | |
| if (netif_carrier_ok(priv->netdev)) | |
| netif_carrier_off(priv->netdev); | |
| mwifiex_stop_net_dev_queue(priv->netdev, priv->adapter); | |
| } | |
| if (mwifiex_del_mgmt_ies(priv)) | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "Failed to delete mgmt IEs!\n"); | |
| if (mwifiex_set_mgmt_ies(priv, ¶ms->beacon_csa)) { | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "%s: setting mgmt ies failed\n", __func__); | |
| return -EFAULT; | |
| } | |
| memcpy(&priv->dfs_chandef, ¶ms->chandef, sizeof(priv->dfs_chandef)); | |
| memcpy(&priv->beacon_after, ¶ms->beacon_after, | |
| sizeof(priv->beacon_after)); | |
| chsw_msec = max(channel_sw->count * priv->bss_cfg.beacon_period, 100); | |
| queue_delayed_work(priv->dfs_chan_sw_workqueue, &priv->dfs_chan_sw_work, | |
| msecs_to_jiffies(chsw_msec)); | |
| return 0; | |
| } | |
| static int mwifiex_cfg80211_get_channel(struct wiphy *wiphy, | |
| struct wireless_dev *wdev, | |
| struct cfg80211_chan_def *chandef) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(wdev->netdev); | |
| struct mwifiex_bssdescriptor *curr_bss; | |
| struct ieee80211_channel *chan; | |
| u8 second_chan_offset; | |
| enum nl80211_channel_type chan_type; | |
| enum nl80211_band band; | |
| int freq; | |
| int ret = -ENODATA; | |
| if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_UAP && | |
| cfg80211_chandef_valid(&priv->bss_chandef)) { | |
| *chandef = priv->bss_chandef; | |
| ret = 0; | |
| } else if (priv->media_connected) { | |
| curr_bss = &priv->curr_bss_params.bss_descriptor; | |
| band = mwifiex_band_to_radio_type(priv->curr_bss_params.band); | |
| freq = ieee80211_channel_to_frequency(curr_bss->channel, band); | |
| chan = ieee80211_get_channel(wiphy, freq); | |
| if (priv->ht_param_present) { | |
| second_chan_offset = priv->assoc_resp_ht_param & | |
| IEEE80211_HT_PARAM_CHA_SEC_OFFSET; | |
| chan_type = mwifiex_sec_chan_offset_to_chan_type | |
| (second_chan_offset); | |
| cfg80211_chandef_create(chandef, chan, chan_type); | |
| } else { | |
| cfg80211_chandef_create(chandef, chan, | |
| NL80211_CHAN_NO_HT); | |
| } | |
| ret = 0; | |
| } | |
| return ret; | |
| } | |
| #ifdef CONFIG_NL80211_TESTMODE | |
| enum mwifiex_tm_attr { | |
| __MWIFIEX_TM_ATTR_INVALID = 0, | |
| MWIFIEX_TM_ATTR_CMD = 1, | |
| MWIFIEX_TM_ATTR_DATA = 2, | |
| /* keep last */ | |
| __MWIFIEX_TM_ATTR_AFTER_LAST, | |
| MWIFIEX_TM_ATTR_MAX = __MWIFIEX_TM_ATTR_AFTER_LAST - 1, | |
| }; | |
| static const struct nla_policy mwifiex_tm_policy[MWIFIEX_TM_ATTR_MAX + 1] = { | |
| [MWIFIEX_TM_ATTR_CMD] = { .type = NLA_U32 }, | |
| [MWIFIEX_TM_ATTR_DATA] = { .type = NLA_BINARY, | |
| .len = MWIFIEX_SIZE_OF_CMD_BUFFER }, | |
| }; | |
| enum mwifiex_tm_command { | |
| MWIFIEX_TM_CMD_HOSTCMD = 0, | |
| }; | |
| static int mwifiex_tm_cmd(struct wiphy *wiphy, struct wireless_dev *wdev, | |
| void *data, int len) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(wdev->netdev); | |
| struct mwifiex_ds_misc_cmd *hostcmd; | |
| struct nlattr *tb[MWIFIEX_TM_ATTR_MAX + 1]; | |
| struct mwifiex_adapter *adapter; | |
| struct sk_buff *skb; | |
| int err; | |
| if (!priv) | |
| return -EINVAL; | |
| adapter = priv->adapter; | |
| err = nla_parse(tb, MWIFIEX_TM_ATTR_MAX, data, len, | |
| mwifiex_tm_policy); | |
| if (err) | |
| return err; | |
| if (!tb[MWIFIEX_TM_ATTR_CMD]) | |
| return -EINVAL; | |
| switch (nla_get_u32(tb[MWIFIEX_TM_ATTR_CMD])) { | |
| case MWIFIEX_TM_CMD_HOSTCMD: | |
| if (!tb[MWIFIEX_TM_ATTR_DATA]) | |
| return -EINVAL; | |
| hostcmd = kzalloc(sizeof(*hostcmd), GFP_KERNEL); | |
| if (!hostcmd) | |
| return -ENOMEM; | |
| hostcmd->len = nla_len(tb[MWIFIEX_TM_ATTR_DATA]); | |
| memcpy(hostcmd->cmd, nla_data(tb[MWIFIEX_TM_ATTR_DATA]), | |
| hostcmd->len); | |
| if (mwifiex_send_cmd(priv, 0, 0, 0, hostcmd, true)) { | |
| dev_err(priv->adapter->dev, "Failed to process hostcmd\n"); | |
| return -EFAULT; | |
| } | |
| /* process hostcmd response*/ | |
| skb = cfg80211_testmode_alloc_reply_skb(wiphy, hostcmd->len); | |
| if (!skb) | |
| return -ENOMEM; | |
| err = nla_put(skb, MWIFIEX_TM_ATTR_DATA, | |
| hostcmd->len, hostcmd->cmd); | |
| if (err) { | |
| kfree_skb(skb); | |
| return -EMSGSIZE; | |
| } | |
| err = cfg80211_testmode_reply(skb); | |
| kfree(hostcmd); | |
| return err; | |
| default: | |
| return -EOPNOTSUPP; | |
| } | |
| } | |
| #endif | |
| static int | |
| mwifiex_cfg80211_start_radar_detection(struct wiphy *wiphy, | |
| struct net_device *dev, | |
| struct cfg80211_chan_def *chandef, | |
| u32 cac_time_ms) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| struct mwifiex_radar_params radar_params; | |
| if (priv->adapter->scan_processing) { | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "radar detection: scan already in process...\n"); | |
| return -EBUSY; | |
| } | |
| if (!mwifiex_is_11h_active(priv)) { | |
| mwifiex_dbg(priv->adapter, INFO, | |
| "Enable 11h extensions in FW\n"); | |
| if (mwifiex_11h_activate(priv, true)) { | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "Failed to activate 11h extensions!!"); | |
| return -1; | |
| } | |
| priv->state_11h.is_11h_active = true; | |
| } | |
| memset(&radar_params, 0, sizeof(struct mwifiex_radar_params)); | |
| radar_params.chandef = chandef; | |
| radar_params.cac_time_ms = cac_time_ms; | |
| memcpy(&priv->dfs_chandef, chandef, sizeof(priv->dfs_chandef)); | |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_CHAN_REPORT_REQUEST, | |
| HostCmd_ACT_GEN_SET, 0, &radar_params, true)) | |
| return -1; | |
| queue_delayed_work(priv->dfs_cac_workqueue, &priv->dfs_cac_work, | |
| msecs_to_jiffies(cac_time_ms)); | |
| return 0; | |
| } | |
| static int | |
| mwifiex_cfg80211_change_station(struct wiphy *wiphy, struct net_device *dev, | |
| const u8 *mac, | |
| struct station_parameters *params) | |
| { | |
| int ret; | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| /* we support change_station handler only for TDLS peers*/ | |
| if (!(params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER))) | |
| return -ENOTSUPP; | |
| /* make sure we are in station mode and connected */ | |
| if ((priv->bss_type != MWIFIEX_BSS_TYPE_STA) || !priv->media_connected) | |
| return -ENOTSUPP; | |
| priv->sta_params = params; | |
| ret = mwifiex_tdls_oper(priv, mac, MWIFIEX_TDLS_CONFIG_LINK); | |
| priv->sta_params = NULL; | |
| return ret; | |
| } | |
| /* station cfg80211 operations */ | |
| static struct cfg80211_ops mwifiex_cfg80211_ops = { | |
| .add_virtual_intf = mwifiex_add_virtual_intf, | |
| .del_virtual_intf = mwifiex_del_virtual_intf, | |
| .change_virtual_intf = mwifiex_cfg80211_change_virtual_intf, | |
| .scan = mwifiex_cfg80211_scan, | |
| .connect = mwifiex_cfg80211_connect, | |
| .disconnect = mwifiex_cfg80211_disconnect, | |
| .get_station = mwifiex_cfg80211_get_station, | |
| .dump_station = mwifiex_cfg80211_dump_station, | |
| .dump_survey = mwifiex_cfg80211_dump_survey, | |
| .set_wiphy_params = mwifiex_cfg80211_set_wiphy_params, | |
| .join_ibss = mwifiex_cfg80211_join_ibss, | |
| .leave_ibss = mwifiex_cfg80211_leave_ibss, | |
| .add_key = mwifiex_cfg80211_add_key, | |
| .del_key = mwifiex_cfg80211_del_key, | |
| .set_default_mgmt_key = mwifiex_cfg80211_set_default_mgmt_key, | |
| .mgmt_tx = mwifiex_cfg80211_mgmt_tx, | |
| .mgmt_frame_register = mwifiex_cfg80211_mgmt_frame_register, | |
| .remain_on_channel = mwifiex_cfg80211_remain_on_channel, | |
| .cancel_remain_on_channel = mwifiex_cfg80211_cancel_remain_on_channel, | |
| .set_default_key = mwifiex_cfg80211_set_default_key, | |
| .set_power_mgmt = mwifiex_cfg80211_set_power_mgmt, | |
| .set_tx_power = mwifiex_cfg80211_set_tx_power, | |
| .get_tx_power = mwifiex_cfg80211_get_tx_power, | |
| .set_bitrate_mask = mwifiex_cfg80211_set_bitrate_mask, | |
| .start_ap = mwifiex_cfg80211_start_ap, | |
| .stop_ap = mwifiex_cfg80211_stop_ap, | |
| .change_beacon = mwifiex_cfg80211_change_beacon, | |
| .set_cqm_rssi_config = mwifiex_cfg80211_set_cqm_rssi_config, | |
| .set_antenna = mwifiex_cfg80211_set_antenna, | |
| .get_antenna = mwifiex_cfg80211_get_antenna, | |
| .del_station = mwifiex_cfg80211_del_station, | |
| .sched_scan_start = mwifiex_cfg80211_sched_scan_start, | |
| .sched_scan_stop = mwifiex_cfg80211_sched_scan_stop, | |
| #ifdef CONFIG_PM | |
| .suspend = mwifiex_cfg80211_suspend, | |
| .resume = mwifiex_cfg80211_resume, | |
| .set_wakeup = mwifiex_cfg80211_set_wakeup, | |
| .set_rekey_data = mwifiex_set_rekey_data, | |
| #endif | |
| .set_coalesce = mwifiex_cfg80211_set_coalesce, | |
| .tdls_mgmt = mwifiex_cfg80211_tdls_mgmt, | |
| .tdls_oper = mwifiex_cfg80211_tdls_oper, | |
| .tdls_channel_switch = mwifiex_cfg80211_tdls_chan_switch, | |
| .tdls_cancel_channel_switch = mwifiex_cfg80211_tdls_cancel_chan_switch, | |
| .add_station = mwifiex_cfg80211_add_station, | |
| .change_station = mwifiex_cfg80211_change_station, | |
| CFG80211_TESTMODE_CMD(mwifiex_tm_cmd) | |
| .get_channel = mwifiex_cfg80211_get_channel, | |
| .start_radar_detection = mwifiex_cfg80211_start_radar_detection, | |
| .channel_switch = mwifiex_cfg80211_channel_switch, | |
| }; | |
| #ifdef CONFIG_PM | |
| static const struct wiphy_wowlan_support mwifiex_wowlan_support = { | |
| .flags = WIPHY_WOWLAN_MAGIC_PKT | WIPHY_WOWLAN_DISCONNECT | | |
| WIPHY_WOWLAN_NET_DETECT | WIPHY_WOWLAN_SUPPORTS_GTK_REKEY | | |
| WIPHY_WOWLAN_GTK_REKEY_FAILURE, | |
| .n_patterns = MWIFIEX_MEF_MAX_FILTERS, | |
| .pattern_min_len = 1, | |
| .pattern_max_len = MWIFIEX_MAX_PATTERN_LEN, | |
| .max_pkt_offset = MWIFIEX_MAX_OFFSET_LEN, | |
| .max_nd_match_sets = MWIFIEX_MAX_ND_MATCH_SETS, | |
| }; | |
| #endif | |
| static bool mwifiex_is_valid_alpha2(const char *alpha2) | |
| { | |
| if (!alpha2 || strlen(alpha2) != 2) | |
| return false; | |
| if (isalpha(alpha2[0]) && isalpha(alpha2[1])) | |
| return true; | |
| return false; | |
| } | |
| static const struct wiphy_coalesce_support mwifiex_coalesce_support = { | |
| .n_rules = MWIFIEX_COALESCE_MAX_RULES, | |
| .max_delay = MWIFIEX_MAX_COALESCING_DELAY, | |
| .n_patterns = MWIFIEX_COALESCE_MAX_FILTERS, | |
| .pattern_min_len = 1, | |
| .pattern_max_len = MWIFIEX_MAX_PATTERN_LEN, | |
| .max_pkt_offset = MWIFIEX_MAX_OFFSET_LEN, | |
| }; | |
| int mwifiex_init_channel_scan_gap(struct mwifiex_adapter *adapter) | |
| { | |
| u32 n_channels_bg, n_channels_a = 0; | |
| n_channels_bg = mwifiex_band_2ghz.n_channels; | |
| if (adapter->config_bands & BAND_A) | |
| n_channels_a = mwifiex_band_5ghz.n_channels; | |
| adapter->num_in_chan_stats = max_t(u32, n_channels_bg, n_channels_a); | |
| adapter->chan_stats = vmalloc(sizeof(*adapter->chan_stats) * | |
| adapter->num_in_chan_stats); | |
| if (!adapter->chan_stats) | |
| return -ENOMEM; | |
| return 0; | |
| } | |
| /* | |
| * This function registers the device with CFG802.11 subsystem. | |
| * | |
| * The function creates the wireless device/wiphy, populates it with | |
| * default parameters and handler function pointers, and finally | |
| * registers the device. | |
| */ | |
| int mwifiex_register_cfg80211(struct mwifiex_adapter *adapter) | |
| { | |
| int ret; | |
| void *wdev_priv; | |
| struct wiphy *wiphy; | |
| struct mwifiex_private *priv = adapter->priv[MWIFIEX_BSS_TYPE_STA]; | |
| u8 *country_code; | |
| u32 thr, retry; | |
| /* create a new wiphy for use with cfg80211 */ | |
| wiphy = wiphy_new(&mwifiex_cfg80211_ops, | |
| sizeof(struct mwifiex_adapter *)); | |
| if (!wiphy) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "%s: creating new wiphy\n", __func__); | |
| return -ENOMEM; | |
| } | |
| wiphy->max_scan_ssids = MWIFIEX_MAX_SSID_LIST_LENGTH; | |
| wiphy->max_scan_ie_len = MWIFIEX_MAX_VSIE_LEN; | |
| wiphy->mgmt_stypes = mwifiex_mgmt_stypes; | |
| wiphy->max_remain_on_channel_duration = 5000; | |
| wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | | |
| BIT(NL80211_IFTYPE_ADHOC) | | |
| BIT(NL80211_IFTYPE_P2P_CLIENT) | | |
| BIT(NL80211_IFTYPE_P2P_GO) | | |
| BIT(NL80211_IFTYPE_AP); | |
| wiphy->bands[NL80211_BAND_2GHZ] = &mwifiex_band_2ghz; | |
| if (adapter->config_bands & BAND_A) | |
| wiphy->bands[NL80211_BAND_5GHZ] = &mwifiex_band_5ghz; | |
| else | |
| wiphy->bands[NL80211_BAND_5GHZ] = NULL; | |
| if (adapter->drcs_enabled && ISSUPP_DRCS_ENABLED(adapter->fw_cap_info)) | |
| wiphy->iface_combinations = &mwifiex_iface_comb_ap_sta_drcs; | |
| else if (adapter->is_hw_11ac_capable) | |
| wiphy->iface_combinations = &mwifiex_iface_comb_ap_sta_vht; | |
| else | |
| wiphy->iface_combinations = &mwifiex_iface_comb_ap_sta; | |
| wiphy->n_iface_combinations = 1; | |
| /* Initialize cipher suits */ | |
| wiphy->cipher_suites = mwifiex_cipher_suites; | |
| wiphy->n_cipher_suites = ARRAY_SIZE(mwifiex_cipher_suites); | |
| if (adapter->regd) { | |
| wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG | | |
| REGULATORY_DISABLE_BEACON_HINTS | | |
| REGULATORY_COUNTRY_IE_IGNORE; | |
| wiphy_apply_custom_regulatory(wiphy, adapter->regd); | |
| } | |
| ether_addr_copy(wiphy->perm_addr, adapter->perm_addr); | |
| wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; | |
| wiphy->flags |= WIPHY_FLAG_HAVE_AP_SME | | |
| WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD | | |
| WIPHY_FLAG_AP_UAPSD | | |
| WIPHY_FLAG_SUPPORTS_SCHED_SCAN | | |
| WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL | | |
| WIPHY_FLAG_HAS_CHANNEL_SWITCH | | |
| WIPHY_FLAG_PS_ON_BY_DEFAULT; | |
| if (ISSUPP_TDLS_ENABLED(adapter->fw_cap_info)) | |
| wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS | | |
| WIPHY_FLAG_TDLS_EXTERNAL_SETUP; | |
| #ifdef CONFIG_PM | |
| wiphy->wowlan = &mwifiex_wowlan_support; | |
| #endif | |
| wiphy->coalesce = &mwifiex_coalesce_support; | |
| wiphy->probe_resp_offload = NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS | | |
| NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 | | |
| NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P; | |
| wiphy->max_sched_scan_ssids = MWIFIEX_MAX_SSID_LIST_LENGTH; | |
| wiphy->max_sched_scan_ie_len = MWIFIEX_MAX_VSIE_LEN; | |
| wiphy->max_match_sets = MWIFIEX_MAX_SSID_LIST_LENGTH; | |
| wiphy->available_antennas_tx = BIT(adapter->number_of_antenna) - 1; | |
| wiphy->available_antennas_rx = BIT(adapter->number_of_antenna) - 1; | |
| wiphy->features |= NL80211_FEATURE_HT_IBSS | | |
| NL80211_FEATURE_INACTIVITY_TIMER | | |
| NL80211_FEATURE_LOW_PRIORITY_SCAN | | |
| NL80211_FEATURE_NEED_OBSS_SCAN | | |
| NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR | | |
| NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR | | |
| NL80211_FEATURE_ND_RANDOM_MAC_ADDR; | |
| if (ISSUPP_TDLS_ENABLED(adapter->fw_cap_info)) | |
| wiphy->features |= NL80211_FEATURE_TDLS_CHANNEL_SWITCH; | |
| if (adapter->fw_api_ver == MWIFIEX_FW_V15) | |
| wiphy->features |= NL80211_FEATURE_SK_TX_STATUS; | |
| /* Reserve space for mwifiex specific private data for BSS */ | |
| wiphy->bss_priv_size = sizeof(struct mwifiex_bss_priv); | |
| wiphy->reg_notifier = mwifiex_reg_notifier; | |
| /* Set struct mwifiex_adapter pointer in wiphy_priv */ | |
| wdev_priv = wiphy_priv(wiphy); | |
| *(unsigned long *)wdev_priv = (unsigned long)adapter; | |
| set_wiphy_dev(wiphy, priv->adapter->dev); | |
| ret = wiphy_register(wiphy); | |
| if (ret < 0) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "%s: wiphy_register failed: %d\n", __func__, ret); | |
| wiphy_free(wiphy); | |
| return ret; | |
| } | |
| if (!adapter->regd) { | |
| if (reg_alpha2 && mwifiex_is_valid_alpha2(reg_alpha2)) { | |
| mwifiex_dbg(adapter, INFO, | |
| "driver hint alpha2: %2.2s\n", reg_alpha2); | |
| regulatory_hint(wiphy, reg_alpha2); | |
| } else { | |
| if (adapter->region_code == 0x00) { | |
| mwifiex_dbg(adapter, WARN, | |
| "Ignore world regulatory domain\n"); | |
| } else { | |
| wiphy->regulatory_flags |= | |
| REGULATORY_DISABLE_BEACON_HINTS | | |
| REGULATORY_COUNTRY_IE_IGNORE; | |
| country_code = | |
| mwifiex_11d_code_2_region( | |
| adapter->region_code); | |
| if (country_code && | |
| regulatory_hint(wiphy, country_code)) | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "regulatory_hint() failed\n"); | |
| } | |
| } | |
| } | |
| mwifiex_send_cmd(priv, HostCmd_CMD_802_11_SNMP_MIB, | |
| HostCmd_ACT_GEN_GET, FRAG_THRESH_I, &thr, true); | |
| wiphy->frag_threshold = thr; | |
| mwifiex_send_cmd(priv, HostCmd_CMD_802_11_SNMP_MIB, | |
| HostCmd_ACT_GEN_GET, RTS_THRESH_I, &thr, true); | |
| wiphy->rts_threshold = thr; | |
| mwifiex_send_cmd(priv, HostCmd_CMD_802_11_SNMP_MIB, | |
| HostCmd_ACT_GEN_GET, SHORT_RETRY_LIM_I, &retry, true); | |
| wiphy->retry_short = (u8) retry; | |
| mwifiex_send_cmd(priv, HostCmd_CMD_802_11_SNMP_MIB, | |
| HostCmd_ACT_GEN_GET, LONG_RETRY_LIM_I, &retry, true); | |
| wiphy->retry_long = (u8) retry; | |
| adapter->wiphy = wiphy; | |
| return ret; | |
| } |