| /* | |
| * Marvell Wireless LAN device driver: debugfs | |
| * | |
| * Copyright (C) 2011-2014, Marvell International Ltd. | |
| * | |
| * This software file (the "File") is distributed by Marvell International | |
| * Ltd. under the terms of the GNU General Public License Version 2, June 1991 | |
| * (the "License"). You may use, redistribute and/or modify this File in | |
| * accordance with the terms and conditions of the License, a copy of which | |
| * is available by writing to the Free Software Foundation, Inc., | |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the | |
| * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. | |
| * | |
| * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE | |
| * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE | |
| * ARE EXPRESSLY DISCLAIMED. The License provides additional details about | |
| * this warranty disclaimer. | |
| */ | |
| #include <linux/debugfs.h> | |
| #include "main.h" | |
| #include "11n.h" | |
| static struct dentry *mwifiex_dfs_dir; | |
| static char *bss_modes[] = { | |
| "UNSPECIFIED", | |
| "ADHOC", | |
| "STATION", | |
| "AP", | |
| "AP_VLAN", | |
| "WDS", | |
| "MONITOR", | |
| "MESH_POINT", | |
| "P2P_CLIENT", | |
| "P2P_GO", | |
| "P2P_DEVICE", | |
| }; | |
| /* | |
| * Proc info file read handler. | |
| * | |
| * This function is called when the 'info' file is opened for reading. | |
| * It prints the following driver related information - | |
| * - Driver name | |
| * - Driver version | |
| * - Driver extended version | |
| * - Interface name | |
| * - BSS mode | |
| * - Media state (connected or disconnected) | |
| * - MAC address | |
| * - Total number of Tx bytes | |
| * - Total number of Rx bytes | |
| * - Total number of Tx packets | |
| * - Total number of Rx packets | |
| * - Total number of dropped Tx packets | |
| * - Total number of dropped Rx packets | |
| * - Total number of corrupted Tx packets | |
| * - Total number of corrupted Rx packets | |
| * - Carrier status (on or off) | |
| * - Tx queue status (started or stopped) | |
| * | |
| * For STA mode drivers, it also prints the following extra - | |
| * - ESSID | |
| * - BSSID | |
| * - Channel | |
| * - Region code | |
| * - Multicast count | |
| * - Multicast addresses | |
| */ | |
| static ssize_t | |
| mwifiex_info_read(struct file *file, char __user *ubuf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct mwifiex_private *priv = | |
| (struct mwifiex_private *) file->private_data; | |
| struct net_device *netdev = priv->netdev; | |
| struct netdev_hw_addr *ha; | |
| struct netdev_queue *txq; | |
| unsigned long page = get_zeroed_page(GFP_KERNEL); | |
| char *p = (char *) page, fmt[64]; | |
| struct mwifiex_bss_info info; | |
| ssize_t ret; | |
| int i = 0; | |
| if (!p) | |
| return -ENOMEM; | |
| memset(&info, 0, sizeof(info)); | |
| ret = mwifiex_get_bss_info(priv, &info); | |
| if (ret) | |
| goto free_and_exit; | |
| mwifiex_drv_get_driver_version(priv->adapter, fmt, sizeof(fmt) - 1); | |
| mwifiex_get_ver_ext(priv, 0); | |
| p += sprintf(p, "driver_name = " "\"mwifiex\"\n"); | |
| p += sprintf(p, "driver_version = %s", fmt); | |
| p += sprintf(p, "\nverext = %s", priv->version_str); | |
| p += sprintf(p, "\ninterface_name=\"%s\"\n", netdev->name); | |
| if (info.bss_mode >= ARRAY_SIZE(bss_modes)) | |
| p += sprintf(p, "bss_mode=\"%d\"\n", info.bss_mode); | |
| else | |
| p += sprintf(p, "bss_mode=\"%s\"\n", bss_modes[info.bss_mode]); | |
| p += sprintf(p, "media_state=\"%s\"\n", | |
| (!priv->media_connected ? "Disconnected" : "Connected")); | |
| p += sprintf(p, "mac_address=\"%pM\"\n", netdev->dev_addr); | |
| if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA) { | |
| p += sprintf(p, "multicast_count=\"%d\"\n", | |
| netdev_mc_count(netdev)); | |
| p += sprintf(p, "essid=\"%s\"\n", info.ssid.ssid); | |
| p += sprintf(p, "bssid=\"%pM\"\n", info.bssid); | |
| p += sprintf(p, "channel=\"%d\"\n", (int) info.bss_chan); | |
| p += sprintf(p, "country_code = \"%s\"\n", info.country_code); | |
| p += sprintf(p, "region_code=\"0x%x\"\n", | |
| priv->adapter->region_code); | |
| netdev_for_each_mc_addr(ha, netdev) | |
| p += sprintf(p, "multicast_address[%d]=\"%pM\"\n", | |
| i++, ha->addr); | |
| } | |
| p += sprintf(p, "num_tx_bytes = %lu\n", priv->stats.tx_bytes); | |
| p += sprintf(p, "num_rx_bytes = %lu\n", priv->stats.rx_bytes); | |
| p += sprintf(p, "num_tx_pkts = %lu\n", priv->stats.tx_packets); | |
| p += sprintf(p, "num_rx_pkts = %lu\n", priv->stats.rx_packets); | |
| p += sprintf(p, "num_tx_pkts_dropped = %lu\n", priv->stats.tx_dropped); | |
| p += sprintf(p, "num_rx_pkts_dropped = %lu\n", priv->stats.rx_dropped); | |
| p += sprintf(p, "num_tx_pkts_err = %lu\n", priv->stats.tx_errors); | |
| p += sprintf(p, "num_rx_pkts_err = %lu\n", priv->stats.rx_errors); | |
| p += sprintf(p, "carrier %s\n", ((netif_carrier_ok(priv->netdev)) | |
| ? "on" : "off")); | |
| p += sprintf(p, "tx queue"); | |
| for (i = 0; i < netdev->num_tx_queues; i++) { | |
| txq = netdev_get_tx_queue(netdev, i); | |
| p += sprintf(p, " %d:%s", i, netif_tx_queue_stopped(txq) ? | |
| "stopped" : "started"); | |
| } | |
| p += sprintf(p, "\n"); | |
| ret = simple_read_from_buffer(ubuf, count, ppos, (char *) page, | |
| (unsigned long) p - page); | |
| free_and_exit: | |
| free_page(page); | |
| return ret; | |
| } | |
| /* | |
| * Proc device dump read handler. | |
| * | |
| * This function is called when the 'device_dump' file is opened for | |
| * reading. | |
| * This function dumps driver information and firmware memory segments | |
| * (ex. DTCM, ITCM, SQRAM etc.) for | |
| * debugging. | |
| */ | |
| static ssize_t | |
| mwifiex_device_dump_read(struct file *file, char __user *ubuf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct mwifiex_private *priv = file->private_data; | |
| if (!priv->adapter->if_ops.device_dump) | |
| return -EIO; | |
| priv->adapter->if_ops.device_dump(priv->adapter); | |
| return 0; | |
| } | |
| /* | |
| * Proc getlog file read handler. | |
| * | |
| * This function is called when the 'getlog' file is opened for reading | |
| * It prints the following log information - | |
| * - Number of multicast Tx frames | |
| * - Number of failed packets | |
| * - Number of Tx retries | |
| * - Number of multicast Tx retries | |
| * - Number of duplicate frames | |
| * - Number of RTS successes | |
| * - Number of RTS failures | |
| * - Number of ACK failures | |
| * - Number of fragmented Rx frames | |
| * - Number of multicast Rx frames | |
| * - Number of FCS errors | |
| * - Number of Tx frames | |
| * - WEP ICV error counts | |
| * - Number of received beacons | |
| * - Number of missed beacons | |
| */ | |
| static ssize_t | |
| mwifiex_getlog_read(struct file *file, char __user *ubuf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct mwifiex_private *priv = | |
| (struct mwifiex_private *) file->private_data; | |
| unsigned long page = get_zeroed_page(GFP_KERNEL); | |
| char *p = (char *) page; | |
| ssize_t ret; | |
| struct mwifiex_ds_get_stats stats; | |
| if (!p) | |
| return -ENOMEM; | |
| memset(&stats, 0, sizeof(stats)); | |
| ret = mwifiex_get_stats_info(priv, &stats); | |
| if (ret) | |
| goto free_and_exit; | |
| p += sprintf(p, "\n" | |
| "mcasttxframe %u\n" | |
| "failed %u\n" | |
| "retry %u\n" | |
| "multiretry %u\n" | |
| "framedup %u\n" | |
| "rtssuccess %u\n" | |
| "rtsfailure %u\n" | |
| "ackfailure %u\n" | |
| "rxfrag %u\n" | |
| "mcastrxframe %u\n" | |
| "fcserror %u\n" | |
| "txframe %u\n" | |
| "wepicverrcnt-1 %u\n" | |
| "wepicverrcnt-2 %u\n" | |
| "wepicverrcnt-3 %u\n" | |
| "wepicverrcnt-4 %u\n" | |
| "bcn_rcv_cnt %u\n" | |
| "bcn_miss_cnt %u\n", | |
| stats.mcast_tx_frame, | |
| stats.failed, | |
| stats.retry, | |
| stats.multi_retry, | |
| stats.frame_dup, | |
| stats.rts_success, | |
| stats.rts_failure, | |
| stats.ack_failure, | |
| stats.rx_frag, | |
| stats.mcast_rx_frame, | |
| stats.fcs_error, | |
| stats.tx_frame, | |
| stats.wep_icv_error[0], | |
| stats.wep_icv_error[1], | |
| stats.wep_icv_error[2], | |
| stats.wep_icv_error[3], | |
| stats.bcn_rcv_cnt, | |
| stats.bcn_miss_cnt); | |
| ret = simple_read_from_buffer(ubuf, count, ppos, (char *) page, | |
| (unsigned long) p - page); | |
| free_and_exit: | |
| free_page(page); | |
| return ret; | |
| } | |
| /* Sysfs histogram file read handler. | |
| * | |
| * This function is called when the 'histogram' file is opened for reading | |
| * It prints the following histogram information - | |
| * - Number of histogram samples | |
| * - Receive packet number of each rx_rate | |
| * - Receive packet number of each snr | |
| * - Receive packet number of each nosie_flr | |
| * - Receive packet number of each signal streath | |
| */ | |
| static ssize_t | |
| mwifiex_histogram_read(struct file *file, char __user *ubuf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct mwifiex_private *priv = | |
| (struct mwifiex_private *)file->private_data; | |
| ssize_t ret; | |
| struct mwifiex_histogram_data *phist_data; | |
| int i, value; | |
| unsigned long page = get_zeroed_page(GFP_KERNEL); | |
| char *p = (char *)page; | |
| if (!p) | |
| return -ENOMEM; | |
| if (!priv || !priv->hist_data) | |
| return -EFAULT; | |
| phist_data = priv->hist_data; | |
| p += sprintf(p, "\n" | |
| "total samples = %d\n", | |
| atomic_read(&phist_data->num_samples)); | |
| p += sprintf(p, "rx rates (in Mbps): 0=1M 1=2M"); | |
| p += sprintf(p, "2=5.5M 3=11M 4=6M 5=9M 6=12M\n"); | |
| p += sprintf(p, "7=18M 8=24M 9=36M 10=48M 11=54M"); | |
| p += sprintf(p, "12-27=MCS0-15(BW20) 28-43=MCS0-15(BW40)\n"); | |
| if (ISSUPP_11ACENABLED(priv->adapter->fw_cap_info)) { | |
| p += sprintf(p, "44-53=MCS0-9(VHT:BW20)"); | |
| p += sprintf(p, "54-63=MCS0-9(VHT:BW40)"); | |
| p += sprintf(p, "64-73=MCS0-9(VHT:BW80)\n\n"); | |
| } else { | |
| p += sprintf(p, "\n"); | |
| } | |
| for (i = 0; i < MWIFIEX_MAX_RX_RATES; i++) { | |
| value = atomic_read(&phist_data->rx_rate[i]); | |
| if (value) | |
| p += sprintf(p, "rx_rate[%02d] = %d\n", i, value); | |
| } | |
| if (ISSUPP_11ACENABLED(priv->adapter->fw_cap_info)) { | |
| for (i = MWIFIEX_MAX_RX_RATES; i < MWIFIEX_MAX_AC_RX_RATES; | |
| i++) { | |
| value = atomic_read(&phist_data->rx_rate[i]); | |
| if (value) | |
| p += sprintf(p, "rx_rate[%02d] = %d\n", | |
| i, value); | |
| } | |
| } | |
| for (i = 0; i < MWIFIEX_MAX_SNR; i++) { | |
| value = atomic_read(&phist_data->snr[i]); | |
| if (value) | |
| p += sprintf(p, "snr[%02ddB] = %d\n", i, value); | |
| } | |
| for (i = 0; i < MWIFIEX_MAX_NOISE_FLR; i++) { | |
| value = atomic_read(&phist_data->noise_flr[i]); | |
| if (value) | |
| p += sprintf(p, "noise_flr[-%02ddBm] = %d\n", | |
| (int)(i-128), value); | |
| } | |
| for (i = 0; i < MWIFIEX_MAX_SIG_STRENGTH; i++) { | |
| value = atomic_read(&phist_data->sig_str[i]); | |
| if (value) | |
| p += sprintf(p, "sig_strength[-%02ddBm] = %d\n", | |
| i, value); | |
| } | |
| ret = simple_read_from_buffer(ubuf, count, ppos, (char *)page, | |
| (unsigned long)p - page); | |
| return ret; | |
| } | |
| static ssize_t | |
| mwifiex_histogram_write(struct file *file, const char __user *ubuf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct mwifiex_private *priv = (void *)file->private_data; | |
| if (priv && priv->hist_data) | |
| mwifiex_hist_data_reset(priv); | |
| return 0; | |
| } | |
| static struct mwifiex_debug_info info; | |
| /* | |
| * Proc debug file read handler. | |
| * | |
| * This function is called when the 'debug' file is opened for reading | |
| * It prints the following log information - | |
| * - Interrupt count | |
| * - WMM AC VO packets count | |
| * - WMM AC VI packets count | |
| * - WMM AC BE packets count | |
| * - WMM AC BK packets count | |
| * - Maximum Tx buffer size | |
| * - Tx buffer size | |
| * - Current Tx buffer size | |
| * - Power Save mode | |
| * - Power Save state | |
| * - Deep Sleep status | |
| * - Device wakeup required status | |
| * - Number of wakeup tries | |
| * - Host Sleep configured status | |
| * - Host Sleep activated status | |
| * - Number of Tx timeouts | |
| * - Number of command timeouts | |
| * - Last timed out command ID | |
| * - Last timed out command action | |
| * - Last command ID | |
| * - Last command action | |
| * - Last command index | |
| * - Last command response ID | |
| * - Last command response index | |
| * - Last event | |
| * - Last event index | |
| * - Number of host to card command failures | |
| * - Number of sleep confirm command failures | |
| * - Number of host to card data failure | |
| * - Number of deauthentication events | |
| * - Number of disassociation events | |
| * - Number of link lost events | |
| * - Number of deauthentication commands | |
| * - Number of association success commands | |
| * - Number of association failure commands | |
| * - Number of commands sent | |
| * - Number of data packets sent | |
| * - Number of command responses received | |
| * - Number of events received | |
| * - Tx BA stream table (TID, RA) | |
| * - Rx reorder table (TID, TA, Start window, Window size, Buffer) | |
| */ | |
| static ssize_t | |
| mwifiex_debug_read(struct file *file, char __user *ubuf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct mwifiex_private *priv = | |
| (struct mwifiex_private *) file->private_data; | |
| unsigned long page = get_zeroed_page(GFP_KERNEL); | |
| char *p = (char *) page; | |
| ssize_t ret; | |
| if (!p) | |
| return -ENOMEM; | |
| ret = mwifiex_get_debug_info(priv, &info); | |
| if (ret) | |
| goto free_and_exit; | |
| p += mwifiex_debug_info_to_buffer(priv, p, &info); | |
| ret = simple_read_from_buffer(ubuf, count, ppos, (char *) page, | |
| (unsigned long) p - page); | |
| free_and_exit: | |
| free_page(page); | |
| return ret; | |
| } | |
| static u32 saved_reg_type, saved_reg_offset, saved_reg_value; | |
| /* | |
| * Proc regrdwr file write handler. | |
| * | |
| * This function is called when the 'regrdwr' file is opened for writing | |
| * | |
| * This function can be used to write to a register. | |
| */ | |
| static ssize_t | |
| mwifiex_regrdwr_write(struct file *file, | |
| const char __user *ubuf, size_t count, loff_t *ppos) | |
| { | |
| char *buf; | |
| int ret; | |
| u32 reg_type = 0, reg_offset = 0, reg_value = UINT_MAX; | |
| buf = memdup_user_nul(ubuf, min(count, (size_t)(PAGE_SIZE - 1))); | |
| if (IS_ERR(buf)) | |
| return PTR_ERR(buf); | |
| sscanf(buf, "%u %x %x", ®_type, ®_offset, ®_value); | |
| if (reg_type == 0 || reg_offset == 0) { | |
| ret = -EINVAL; | |
| goto done; | |
| } else { | |
| saved_reg_type = reg_type; | |
| saved_reg_offset = reg_offset; | |
| saved_reg_value = reg_value; | |
| ret = count; | |
| } | |
| done: | |
| kfree(buf); | |
| return ret; | |
| } | |
| /* | |
| * Proc regrdwr file read handler. | |
| * | |
| * This function is called when the 'regrdwr' file is opened for reading | |
| * | |
| * This function can be used to read from a register. | |
| */ | |
| static ssize_t | |
| mwifiex_regrdwr_read(struct file *file, char __user *ubuf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct mwifiex_private *priv = | |
| (struct mwifiex_private *) file->private_data; | |
| unsigned long addr = get_zeroed_page(GFP_KERNEL); | |
| char *buf = (char *) addr; | |
| int pos = 0, ret = 0; | |
| u32 reg_value; | |
| if (!buf) | |
| return -ENOMEM; | |
| if (!saved_reg_type) { | |
| /* No command has been given */ | |
| pos += snprintf(buf, PAGE_SIZE, "0"); | |
| goto done; | |
| } | |
| /* Set command has been given */ | |
| if (saved_reg_value != UINT_MAX) { | |
| ret = mwifiex_reg_write(priv, saved_reg_type, saved_reg_offset, | |
| saved_reg_value); | |
| pos += snprintf(buf, PAGE_SIZE, "%u 0x%x 0x%x\n", | |
| saved_reg_type, saved_reg_offset, | |
| saved_reg_value); | |
| ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos); | |
| goto done; | |
| } | |
| /* Get command has been given */ | |
| ret = mwifiex_reg_read(priv, saved_reg_type, | |
| saved_reg_offset, ®_value); | |
| if (ret) { | |
| ret = -EINVAL; | |
| goto done; | |
| } | |
| pos += snprintf(buf, PAGE_SIZE, "%u 0x%x 0x%x\n", saved_reg_type, | |
| saved_reg_offset, reg_value); | |
| ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos); | |
| done: | |
| free_page(addr); | |
| return ret; | |
| } | |
| /* Proc debug_mask file read handler. | |
| * This function is called when the 'debug_mask' file is opened for reading | |
| * This function can be used read driver debugging mask value. | |
| */ | |
| static ssize_t | |
| mwifiex_debug_mask_read(struct file *file, char __user *ubuf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct mwifiex_private *priv = | |
| (struct mwifiex_private *)file->private_data; | |
| unsigned long page = get_zeroed_page(GFP_KERNEL); | |
| char *buf = (char *)page; | |
| size_t ret = 0; | |
| int pos = 0; | |
| if (!buf) | |
| return -ENOMEM; | |
| pos += snprintf(buf, PAGE_SIZE, "debug mask=0x%08x\n", | |
| priv->adapter->debug_mask); | |
| ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos); | |
| free_page(page); | |
| return ret; | |
| } | |
| /* Proc debug_mask file read handler. | |
| * This function is called when the 'debug_mask' file is opened for reading | |
| * This function can be used read driver debugging mask value. | |
| */ | |
| static ssize_t | |
| mwifiex_debug_mask_write(struct file *file, const char __user *ubuf, | |
| size_t count, loff_t *ppos) | |
| { | |
| int ret; | |
| unsigned long debug_mask; | |
| struct mwifiex_private *priv = (void *)file->private_data; | |
| char *buf; | |
| buf = memdup_user_nul(ubuf, min(count, (size_t)(PAGE_SIZE - 1))); | |
| if (IS_ERR(buf)) | |
| return PTR_ERR(buf); | |
| if (kstrtoul(buf, 0, &debug_mask)) { | |
| ret = -EINVAL; | |
| goto done; | |
| } | |
| priv->adapter->debug_mask = debug_mask; | |
| ret = count; | |
| done: | |
| kfree(buf); | |
| return ret; | |
| } | |
| /* debugfs verext file write handler. | |
| * This function is called when the 'verext' file is opened for write | |
| */ | |
| static ssize_t | |
| mwifiex_verext_write(struct file *file, const char __user *ubuf, | |
| size_t count, loff_t *ppos) | |
| { | |
| int ret; | |
| u32 versionstrsel; | |
| struct mwifiex_private *priv = (void *)file->private_data; | |
| char buf[16]; | |
| memset(buf, 0, sizeof(buf)); | |
| if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) | |
| return -EFAULT; | |
| ret = kstrtou32(buf, 10, &versionstrsel); | |
| if (ret) | |
| return ret; | |
| priv->versionstrsel = versionstrsel; | |
| return count; | |
| } | |
| /* Proc verext file read handler. | |
| * This function is called when the 'verext' file is opened for reading | |
| * This function can be used read driver exteneed verion string. | |
| */ | |
| static ssize_t | |
| mwifiex_verext_read(struct file *file, char __user *ubuf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct mwifiex_private *priv = | |
| (struct mwifiex_private *)file->private_data; | |
| char buf[256]; | |
| int ret; | |
| mwifiex_get_ver_ext(priv, priv->versionstrsel); | |
| ret = snprintf(buf, sizeof(buf), "version string: %s\n", | |
| priv->version_str); | |
| return simple_read_from_buffer(ubuf, count, ppos, buf, ret); | |
| } | |
| /* Proc memrw file write handler. | |
| * This function is called when the 'memrw' file is opened for writing | |
| * This function can be used to write to a memory location. | |
| */ | |
| static ssize_t | |
| mwifiex_memrw_write(struct file *file, const char __user *ubuf, size_t count, | |
| loff_t *ppos) | |
| { | |
| int ret; | |
| char cmd; | |
| struct mwifiex_ds_mem_rw mem_rw; | |
| u16 cmd_action; | |
| struct mwifiex_private *priv = (void *)file->private_data; | |
| char *buf; | |
| buf = memdup_user_nul(ubuf, min(count, (size_t)(PAGE_SIZE - 1))); | |
| if (IS_ERR(buf)) | |
| return PTR_ERR(buf); | |
| ret = sscanf(buf, "%c %x %x", &cmd, &mem_rw.addr, &mem_rw.value); | |
| if (ret != 3) { | |
| ret = -EINVAL; | |
| goto done; | |
| } | |
| if ((cmd == 'r') || (cmd == 'R')) { | |
| cmd_action = HostCmd_ACT_GEN_GET; | |
| mem_rw.value = 0; | |
| } else if ((cmd == 'w') || (cmd == 'W')) { | |
| cmd_action = HostCmd_ACT_GEN_SET; | |
| } else { | |
| ret = -EINVAL; | |
| goto done; | |
| } | |
| memcpy(&priv->mem_rw, &mem_rw, sizeof(mem_rw)); | |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_MEM_ACCESS, cmd_action, 0, | |
| &mem_rw, true)) | |
| ret = -1; | |
| else | |
| ret = count; | |
| done: | |
| kfree(buf); | |
| return ret; | |
| } | |
| /* Proc memrw file read handler. | |
| * This function is called when the 'memrw' file is opened for reading | |
| * This function can be used to read from a memory location. | |
| */ | |
| static ssize_t | |
| mwifiex_memrw_read(struct file *file, char __user *ubuf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct mwifiex_private *priv = (void *)file->private_data; | |
| unsigned long addr = get_zeroed_page(GFP_KERNEL); | |
| char *buf = (char *)addr; | |
| int ret, pos = 0; | |
| if (!buf) | |
| return -ENOMEM; | |
| pos += snprintf(buf, PAGE_SIZE, "0x%x 0x%x\n", priv->mem_rw.addr, | |
| priv->mem_rw.value); | |
| ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos); | |
| free_page(addr); | |
| return ret; | |
| } | |
| static u32 saved_offset = -1, saved_bytes = -1; | |
| /* | |
| * Proc rdeeprom file write handler. | |
| * | |
| * This function is called when the 'rdeeprom' file is opened for writing | |
| * | |
| * This function can be used to write to a RDEEPROM location. | |
| */ | |
| static ssize_t | |
| mwifiex_rdeeprom_write(struct file *file, | |
| const char __user *ubuf, size_t count, loff_t *ppos) | |
| { | |
| char *buf; | |
| int ret = 0; | |
| int offset = -1, bytes = -1; | |
| buf = memdup_user_nul(ubuf, min(count, (size_t)(PAGE_SIZE - 1))); | |
| if (IS_ERR(buf)) | |
| return PTR_ERR(buf); | |
| sscanf(buf, "%d %d", &offset, &bytes); | |
| if (offset == -1 || bytes == -1) { | |
| ret = -EINVAL; | |
| goto done; | |
| } else { | |
| saved_offset = offset; | |
| saved_bytes = bytes; | |
| ret = count; | |
| } | |
| done: | |
| kfree(buf); | |
| return ret; | |
| } | |
| /* | |
| * Proc rdeeprom read write handler. | |
| * | |
| * This function is called when the 'rdeeprom' file is opened for reading | |
| * | |
| * This function can be used to read from a RDEEPROM location. | |
| */ | |
| static ssize_t | |
| mwifiex_rdeeprom_read(struct file *file, char __user *ubuf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct mwifiex_private *priv = | |
| (struct mwifiex_private *) file->private_data; | |
| unsigned long addr = get_zeroed_page(GFP_KERNEL); | |
| char *buf = (char *) addr; | |
| int pos, ret, i; | |
| u8 value[MAX_EEPROM_DATA]; | |
| if (!buf) | |
| return -ENOMEM; | |
| if (saved_offset == -1) { | |
| /* No command has been given */ | |
| pos = snprintf(buf, PAGE_SIZE, "0"); | |
| goto done; | |
| } | |
| /* Get command has been given */ | |
| ret = mwifiex_eeprom_read(priv, (u16) saved_offset, | |
| (u16) saved_bytes, value); | |
| if (ret) { | |
| ret = -EINVAL; | |
| goto out_free; | |
| } | |
| pos = snprintf(buf, PAGE_SIZE, "%d %d ", saved_offset, saved_bytes); | |
| for (i = 0; i < saved_bytes; i++) | |
| pos += scnprintf(buf + pos, PAGE_SIZE - pos, "%d ", value[i]); | |
| done: | |
| ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos); | |
| out_free: | |
| free_page(addr); | |
| return ret; | |
| } | |
| /* Proc hscfg file write handler | |
| * This function can be used to configure the host sleep parameters. | |
| */ | |
| static ssize_t | |
| mwifiex_hscfg_write(struct file *file, const char __user *ubuf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct mwifiex_private *priv = (void *)file->private_data; | |
| char *buf; | |
| int ret, arg_num; | |
| struct mwifiex_ds_hs_cfg hscfg; | |
| int conditions = HS_CFG_COND_DEF; | |
| u32 gpio = HS_CFG_GPIO_DEF, gap = HS_CFG_GAP_DEF; | |
| buf = memdup_user_nul(ubuf, min(count, (size_t)(PAGE_SIZE - 1))); | |
| if (IS_ERR(buf)) | |
| return PTR_ERR(buf); | |
| arg_num = sscanf(buf, "%d %x %x", &conditions, &gpio, &gap); | |
| memset(&hscfg, 0, sizeof(struct mwifiex_ds_hs_cfg)); | |
| if (arg_num > 3) { | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "Too many arguments\n"); | |
| ret = -EINVAL; | |
| goto done; | |
| } | |
| if (arg_num >= 1 && arg_num < 3) | |
| mwifiex_set_hs_params(priv, HostCmd_ACT_GEN_GET, | |
| MWIFIEX_SYNC_CMD, &hscfg); | |
| if (arg_num) { | |
| if (conditions == HS_CFG_CANCEL) { | |
| mwifiex_cancel_hs(priv, MWIFIEX_ASYNC_CMD); | |
| ret = count; | |
| goto done; | |
| } | |
| hscfg.conditions = conditions; | |
| } | |
| if (arg_num >= 2) | |
| hscfg.gpio = gpio; | |
| if (arg_num == 3) | |
| hscfg.gap = gap; | |
| hscfg.is_invoke_hostcmd = false; | |
| mwifiex_set_hs_params(priv, HostCmd_ACT_GEN_SET, | |
| MWIFIEX_SYNC_CMD, &hscfg); | |
| mwifiex_enable_hs(priv->adapter); | |
| priv->adapter->hs_enabling = false; | |
| ret = count; | |
| done: | |
| kfree(buf); | |
| return ret; | |
| } | |
| /* Proc hscfg file read handler | |
| * This function can be used to read host sleep configuration | |
| * parameters from driver. | |
| */ | |
| static ssize_t | |
| mwifiex_hscfg_read(struct file *file, char __user *ubuf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct mwifiex_private *priv = (void *)file->private_data; | |
| unsigned long addr = get_zeroed_page(GFP_KERNEL); | |
| char *buf = (char *)addr; | |
| int pos, ret; | |
| struct mwifiex_ds_hs_cfg hscfg; | |
| if (!buf) | |
| return -ENOMEM; | |
| mwifiex_set_hs_params(priv, HostCmd_ACT_GEN_GET, | |
| MWIFIEX_SYNC_CMD, &hscfg); | |
| pos = snprintf(buf, PAGE_SIZE, "%u 0x%x 0x%x\n", hscfg.conditions, | |
| hscfg.gpio, hscfg.gap); | |
| ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos); | |
| free_page(addr); | |
| return ret; | |
| } | |
| static ssize_t | |
| mwifiex_timeshare_coex_read(struct file *file, char __user *ubuf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct mwifiex_private *priv = file->private_data; | |
| char buf[3]; | |
| bool timeshare_coex; | |
| int ret; | |
| unsigned int len; | |
| if (priv->adapter->fw_api_ver != MWIFIEX_FW_V15) | |
| return -EOPNOTSUPP; | |
| ret = mwifiex_send_cmd(priv, HostCmd_CMD_ROBUST_COEX, | |
| HostCmd_ACT_GEN_GET, 0, ×hare_coex, true); | |
| if (ret) | |
| return ret; | |
| len = sprintf(buf, "%d\n", timeshare_coex); | |
| return simple_read_from_buffer(ubuf, count, ppos, buf, len); | |
| } | |
| static ssize_t | |
| mwifiex_timeshare_coex_write(struct file *file, const char __user *ubuf, | |
| size_t count, loff_t *ppos) | |
| { | |
| bool timeshare_coex; | |
| struct mwifiex_private *priv = file->private_data; | |
| char kbuf[16]; | |
| int ret; | |
| if (priv->adapter->fw_api_ver != MWIFIEX_FW_V15) | |
| return -EOPNOTSUPP; | |
| memset(kbuf, 0, sizeof(kbuf)); | |
| if (copy_from_user(&kbuf, ubuf, min_t(size_t, sizeof(kbuf) - 1, count))) | |
| return -EFAULT; | |
| if (strtobool(kbuf, ×hare_coex)) | |
| return -EINVAL; | |
| ret = mwifiex_send_cmd(priv, HostCmd_CMD_ROBUST_COEX, | |
| HostCmd_ACT_GEN_SET, 0, ×hare_coex, true); | |
| if (ret) | |
| return ret; | |
| else | |
| return count; | |
| } | |
| static ssize_t | |
| mwifiex_reset_write(struct file *file, | |
| const char __user *ubuf, size_t count, loff_t *ppos) | |
| { | |
| struct mwifiex_private *priv = file->private_data; | |
| struct mwifiex_adapter *adapter = priv->adapter; | |
| bool result; | |
| int rc; | |
| rc = kstrtobool_from_user(ubuf, count, &result); | |
| if (rc) | |
| return rc; | |
| if (!result) | |
| return -EINVAL; | |
| if (adapter->if_ops.card_reset) { | |
| dev_info(adapter->dev, "Resetting per request\n"); | |
| adapter->hw_status = MWIFIEX_HW_STATUS_RESET; | |
| mwifiex_cancel_all_pending_cmd(adapter); | |
| adapter->if_ops.card_reset(adapter); | |
| } | |
| return count; | |
| } | |
| #define MWIFIEX_DFS_ADD_FILE(name) do { \ | |
| if (!debugfs_create_file(#name, 0644, priv->dfs_dev_dir, \ | |
| priv, &mwifiex_dfs_##name##_fops)) \ | |
| return; \ | |
| } while (0); | |
| #define MWIFIEX_DFS_FILE_OPS(name) \ | |
| static const struct file_operations mwifiex_dfs_##name##_fops = { \ | |
| .read = mwifiex_##name##_read, \ | |
| .write = mwifiex_##name##_write, \ | |
| .open = simple_open, \ | |
| }; | |
| #define MWIFIEX_DFS_FILE_READ_OPS(name) \ | |
| static const struct file_operations mwifiex_dfs_##name##_fops = { \ | |
| .read = mwifiex_##name##_read, \ | |
| .open = simple_open, \ | |
| }; | |
| #define MWIFIEX_DFS_FILE_WRITE_OPS(name) \ | |
| static const struct file_operations mwifiex_dfs_##name##_fops = { \ | |
| .write = mwifiex_##name##_write, \ | |
| .open = simple_open, \ | |
| }; | |
| MWIFIEX_DFS_FILE_READ_OPS(info); | |
| MWIFIEX_DFS_FILE_READ_OPS(debug); | |
| MWIFIEX_DFS_FILE_READ_OPS(getlog); | |
| MWIFIEX_DFS_FILE_READ_OPS(device_dump); | |
| MWIFIEX_DFS_FILE_OPS(regrdwr); | |
| MWIFIEX_DFS_FILE_OPS(rdeeprom); | |
| MWIFIEX_DFS_FILE_OPS(memrw); | |
| MWIFIEX_DFS_FILE_OPS(hscfg); | |
| MWIFIEX_DFS_FILE_OPS(histogram); | |
| MWIFIEX_DFS_FILE_OPS(debug_mask); | |
| MWIFIEX_DFS_FILE_OPS(timeshare_coex); | |
| MWIFIEX_DFS_FILE_WRITE_OPS(reset); | |
| MWIFIEX_DFS_FILE_OPS(verext); | |
| /* | |
| * This function creates the debug FS directory structure and the files. | |
| */ | |
| void | |
| mwifiex_dev_debugfs_init(struct mwifiex_private *priv) | |
| { | |
| if (!mwifiex_dfs_dir || !priv) | |
| return; | |
| priv->dfs_dev_dir = debugfs_create_dir(priv->netdev->name, | |
| mwifiex_dfs_dir); | |
| if (!priv->dfs_dev_dir) | |
| return; | |
| MWIFIEX_DFS_ADD_FILE(info); | |
| MWIFIEX_DFS_ADD_FILE(debug); | |
| MWIFIEX_DFS_ADD_FILE(getlog); | |
| MWIFIEX_DFS_ADD_FILE(regrdwr); | |
| MWIFIEX_DFS_ADD_FILE(rdeeprom); | |
| MWIFIEX_DFS_ADD_FILE(device_dump); | |
| MWIFIEX_DFS_ADD_FILE(memrw); | |
| MWIFIEX_DFS_ADD_FILE(hscfg); | |
| MWIFIEX_DFS_ADD_FILE(histogram); | |
| MWIFIEX_DFS_ADD_FILE(debug_mask); | |
| MWIFIEX_DFS_ADD_FILE(timeshare_coex); | |
| MWIFIEX_DFS_ADD_FILE(reset); | |
| MWIFIEX_DFS_ADD_FILE(verext); | |
| } | |
| /* | |
| * This function removes the debug FS directory structure and the files. | |
| */ | |
| void | |
| mwifiex_dev_debugfs_remove(struct mwifiex_private *priv) | |
| { | |
| if (!priv) | |
| return; | |
| debugfs_remove_recursive(priv->dfs_dev_dir); | |
| } | |
| /* | |
| * This function creates the top level proc directory. | |
| */ | |
| void | |
| mwifiex_debugfs_init(void) | |
| { | |
| if (!mwifiex_dfs_dir) | |
| mwifiex_dfs_dir = debugfs_create_dir("mwifiex", NULL); | |
| } | |
| /* | |
| * This function removes the top level proc directory. | |
| */ | |
| void | |
| mwifiex_debugfs_remove(void) | |
| { | |
| if (mwifiex_dfs_dir) | |
| debugfs_remove(mwifiex_dfs_dir); | |
| } |