| /* | |
| * Marvell Wireless LAN device driver: major functions | |
| * | |
| * Copyright (C) 2011-2014, Marvell International Ltd. | |
| * | |
| * This software file (the "File") is distributed by Marvell International | |
| * Ltd. under the terms of the GNU General Public License Version 2, June 1991 | |
| * (the "License"). You may use, redistribute and/or modify this File in | |
| * accordance with the terms and conditions of the License, a copy of which | |
| * is available by writing to the Free Software Foundation, Inc., | |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the | |
| * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. | |
| * | |
| * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE | |
| * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE | |
| * ARE EXPRESSLY DISCLAIMED. The License provides additional details about | |
| * this warranty disclaimer. | |
| */ | |
| #include "main.h" | |
| #include "wmm.h" | |
| #include "cfg80211.h" | |
| #include "11n.h" | |
| #define VERSION "1.0" | |
| #define MFG_FIRMWARE "mwifiex_mfg.bin" | |
| static unsigned int debug_mask = MWIFIEX_DEFAULT_DEBUG_MASK; | |
| module_param(debug_mask, uint, 0); | |
| MODULE_PARM_DESC(debug_mask, "bitmap for debug flags"); | |
| const char driver_version[] = "mwifiex " VERSION " (%s) "; | |
| static char *cal_data_cfg; | |
| module_param(cal_data_cfg, charp, 0); | |
| static unsigned short driver_mode; | |
| module_param(driver_mode, ushort, 0); | |
| MODULE_PARM_DESC(driver_mode, | |
| "station=0x1(default), ap-sta=0x3, station-p2p=0x5, ap-sta-p2p=0x7"); | |
| bool mfg_mode; | |
| module_param(mfg_mode, bool, 0); | |
| MODULE_PARM_DESC(mfg_mode, "manufacturing mode enable:1, disable:0"); | |
| /* | |
| * This function registers the device and performs all the necessary | |
| * initializations. | |
| * | |
| * The following initialization operations are performed - | |
| * - Allocate adapter structure | |
| * - Save interface specific operations table in adapter | |
| * - Call interface specific initialization routine | |
| * - Allocate private structures | |
| * - Set default adapter structure parameters | |
| * - Initialize locks | |
| * | |
| * In case of any errors during inittialization, this function also ensures | |
| * proper cleanup before exiting. | |
| */ | |
| static int mwifiex_register(void *card, struct mwifiex_if_ops *if_ops, | |
| void **padapter) | |
| { | |
| struct mwifiex_adapter *adapter; | |
| int i; | |
| adapter = kzalloc(sizeof(struct mwifiex_adapter), GFP_KERNEL); | |
| if (!adapter) | |
| return -ENOMEM; | |
| *padapter = adapter; | |
| adapter->card = card; | |
| /* Save interface specific operations in adapter */ | |
| memmove(&adapter->if_ops, if_ops, sizeof(struct mwifiex_if_ops)); | |
| adapter->debug_mask = debug_mask; | |
| /* card specific initialization has been deferred until now .. */ | |
| if (adapter->if_ops.init_if) | |
| if (adapter->if_ops.init_if(adapter)) | |
| goto error; | |
| adapter->priv_num = 0; | |
| for (i = 0; i < MWIFIEX_MAX_BSS_NUM; i++) { | |
| /* Allocate memory for private structure */ | |
| adapter->priv[i] = | |
| kzalloc(sizeof(struct mwifiex_private), GFP_KERNEL); | |
| if (!adapter->priv[i]) | |
| goto error; | |
| adapter->priv[i]->adapter = adapter; | |
| adapter->priv_num++; | |
| } | |
| mwifiex_init_lock_list(adapter); | |
| setup_timer(&adapter->cmd_timer, mwifiex_cmd_timeout_func, | |
| (unsigned long)adapter); | |
| return 0; | |
| error: | |
| mwifiex_dbg(adapter, ERROR, | |
| "info: leave mwifiex_register with error\n"); | |
| for (i = 0; i < adapter->priv_num; i++) | |
| kfree(adapter->priv[i]); | |
| kfree(adapter); | |
| return -1; | |
| } | |
| /* | |
| * This function unregisters the device and performs all the necessary | |
| * cleanups. | |
| * | |
| * The following cleanup operations are performed - | |
| * - Free the timers | |
| * - Free beacon buffers | |
| * - Free private structures | |
| * - Free adapter structure | |
| */ | |
| static int mwifiex_unregister(struct mwifiex_adapter *adapter) | |
| { | |
| s32 i; | |
| if (adapter->if_ops.cleanup_if) | |
| adapter->if_ops.cleanup_if(adapter); | |
| del_timer_sync(&adapter->cmd_timer); | |
| /* Free private structures */ | |
| for (i = 0; i < adapter->priv_num; i++) { | |
| if (adapter->priv[i]) { | |
| mwifiex_free_curr_bcn(adapter->priv[i]); | |
| kfree(adapter->priv[i]); | |
| } | |
| } | |
| if (adapter->nd_info) { | |
| for (i = 0 ; i < adapter->nd_info->n_matches ; i++) | |
| kfree(adapter->nd_info->matches[i]); | |
| kfree(adapter->nd_info); | |
| adapter->nd_info = NULL; | |
| } | |
| kfree(adapter->regd); | |
| vfree(adapter->chan_stats); | |
| kfree(adapter); | |
| return 0; | |
| } | |
| void mwifiex_queue_main_work(struct mwifiex_adapter *adapter) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&adapter->main_proc_lock, flags); | |
| if (adapter->mwifiex_processing) { | |
| adapter->more_task_flag = true; | |
| spin_unlock_irqrestore(&adapter->main_proc_lock, flags); | |
| } else { | |
| spin_unlock_irqrestore(&adapter->main_proc_lock, flags); | |
| queue_work(adapter->workqueue, &adapter->main_work); | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(mwifiex_queue_main_work); | |
| static void mwifiex_queue_rx_work(struct mwifiex_adapter *adapter) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&adapter->rx_proc_lock, flags); | |
| if (adapter->rx_processing) { | |
| spin_unlock_irqrestore(&adapter->rx_proc_lock, flags); | |
| } else { | |
| spin_unlock_irqrestore(&adapter->rx_proc_lock, flags); | |
| queue_work(adapter->rx_workqueue, &adapter->rx_work); | |
| } | |
| } | |
| static int mwifiex_process_rx(struct mwifiex_adapter *adapter) | |
| { | |
| unsigned long flags; | |
| struct sk_buff *skb; | |
| struct mwifiex_rxinfo *rx_info; | |
| spin_lock_irqsave(&adapter->rx_proc_lock, flags); | |
| if (adapter->rx_processing || adapter->rx_locked) { | |
| spin_unlock_irqrestore(&adapter->rx_proc_lock, flags); | |
| goto exit_rx_proc; | |
| } else { | |
| adapter->rx_processing = true; | |
| spin_unlock_irqrestore(&adapter->rx_proc_lock, flags); | |
| } | |
| /* Check for Rx data */ | |
| while ((skb = skb_dequeue(&adapter->rx_data_q))) { | |
| atomic_dec(&adapter->rx_pending); | |
| if ((adapter->delay_main_work || | |
| adapter->iface_type == MWIFIEX_USB) && | |
| (atomic_read(&adapter->rx_pending) < LOW_RX_PENDING)) { | |
| if (adapter->if_ops.submit_rem_rx_urbs) | |
| adapter->if_ops.submit_rem_rx_urbs(adapter); | |
| adapter->delay_main_work = false; | |
| mwifiex_queue_main_work(adapter); | |
| } | |
| rx_info = MWIFIEX_SKB_RXCB(skb); | |
| if (rx_info->buf_type == MWIFIEX_TYPE_AGGR_DATA) { | |
| if (adapter->if_ops.deaggr_pkt) | |
| adapter->if_ops.deaggr_pkt(adapter, skb); | |
| dev_kfree_skb_any(skb); | |
| } else { | |
| mwifiex_handle_rx_packet(adapter, skb); | |
| } | |
| } | |
| spin_lock_irqsave(&adapter->rx_proc_lock, flags); | |
| adapter->rx_processing = false; | |
| spin_unlock_irqrestore(&adapter->rx_proc_lock, flags); | |
| exit_rx_proc: | |
| return 0; | |
| } | |
| /* | |
| * The main process. | |
| * | |
| * This function is the main procedure of the driver and handles various driver | |
| * operations. It runs in a loop and provides the core functionalities. | |
| * | |
| * The main responsibilities of this function are - | |
| * - Ensure concurrency control | |
| * - Handle pending interrupts and call interrupt handlers | |
| * - Wake up the card if required | |
| * - Handle command responses and call response handlers | |
| * - Handle events and call event handlers | |
| * - Execute pending commands | |
| * - Transmit pending data packets | |
| */ | |
| int mwifiex_main_process(struct mwifiex_adapter *adapter) | |
| { | |
| int ret = 0; | |
| unsigned long flags; | |
| spin_lock_irqsave(&adapter->main_proc_lock, flags); | |
| /* Check if already processing */ | |
| if (adapter->mwifiex_processing || adapter->main_locked) { | |
| adapter->more_task_flag = true; | |
| spin_unlock_irqrestore(&adapter->main_proc_lock, flags); | |
| goto exit_main_proc; | |
| } else { | |
| adapter->mwifiex_processing = true; | |
| spin_unlock_irqrestore(&adapter->main_proc_lock, flags); | |
| } | |
| process_start: | |
| do { | |
| if ((adapter->hw_status == MWIFIEX_HW_STATUS_CLOSING) || | |
| (adapter->hw_status == MWIFIEX_HW_STATUS_NOT_READY)) | |
| break; | |
| /* For non-USB interfaces, If we process interrupts first, it | |
| * would increase RX pending even further. Avoid this by | |
| * checking if rx_pending has crossed high threshold and | |
| * schedule rx work queue and then process interrupts. | |
| * For USB interface, there are no interrupts. We already have | |
| * HIGH_RX_PENDING check in usb.c | |
| */ | |
| if (atomic_read(&adapter->rx_pending) >= HIGH_RX_PENDING && | |
| adapter->iface_type != MWIFIEX_USB) { | |
| adapter->delay_main_work = true; | |
| mwifiex_queue_rx_work(adapter); | |
| break; | |
| } | |
| /* Handle pending interrupt if any */ | |
| if (adapter->int_status) { | |
| if (adapter->hs_activated) | |
| mwifiex_process_hs_config(adapter); | |
| if (adapter->if_ops.process_int_status) | |
| adapter->if_ops.process_int_status(adapter); | |
| } | |
| if (adapter->rx_work_enabled && adapter->data_received) | |
| mwifiex_queue_rx_work(adapter); | |
| /* Need to wake up the card ? */ | |
| if ((adapter->ps_state == PS_STATE_SLEEP) && | |
| (adapter->pm_wakeup_card_req && | |
| !adapter->pm_wakeup_fw_try) && | |
| (is_command_pending(adapter) || | |
| !skb_queue_empty(&adapter->tx_data_q) || | |
| !mwifiex_bypass_txlist_empty(adapter) || | |
| !mwifiex_wmm_lists_empty(adapter))) { | |
| adapter->pm_wakeup_fw_try = true; | |
| mod_timer(&adapter->wakeup_timer, jiffies + (HZ*3)); | |
| adapter->if_ops.wakeup(adapter); | |
| continue; | |
| } | |
| if (IS_CARD_RX_RCVD(adapter)) { | |
| adapter->data_received = false; | |
| adapter->pm_wakeup_fw_try = false; | |
| del_timer(&adapter->wakeup_timer); | |
| if (adapter->ps_state == PS_STATE_SLEEP) | |
| adapter->ps_state = PS_STATE_AWAKE; | |
| } else { | |
| /* We have tried to wakeup the card already */ | |
| if (adapter->pm_wakeup_fw_try) | |
| break; | |
| if (adapter->ps_state != PS_STATE_AWAKE) | |
| break; | |
| if (adapter->tx_lock_flag) { | |
| if (adapter->iface_type == MWIFIEX_USB) { | |
| if (!adapter->usb_mc_setup) | |
| break; | |
| } else | |
| break; | |
| } | |
| if ((!adapter->scan_chan_gap_enabled && | |
| adapter->scan_processing) || adapter->data_sent || | |
| mwifiex_is_tdls_chan_switching | |
| (mwifiex_get_priv(adapter, | |
| MWIFIEX_BSS_ROLE_STA)) || | |
| (mwifiex_wmm_lists_empty(adapter) && | |
| mwifiex_bypass_txlist_empty(adapter) && | |
| skb_queue_empty(&adapter->tx_data_q))) { | |
| if (adapter->cmd_sent || adapter->curr_cmd || | |
| !mwifiex_is_send_cmd_allowed | |
| (mwifiex_get_priv(adapter, | |
| MWIFIEX_BSS_ROLE_STA)) || | |
| (!is_command_pending(adapter))) | |
| break; | |
| } | |
| } | |
| /* Check for event */ | |
| if (adapter->event_received) { | |
| adapter->event_received = false; | |
| mwifiex_process_event(adapter); | |
| } | |
| /* Check for Cmd Resp */ | |
| if (adapter->cmd_resp_received) { | |
| adapter->cmd_resp_received = false; | |
| mwifiex_process_cmdresp(adapter); | |
| /* call mwifiex back when init_fw is done */ | |
| if (adapter->hw_status == MWIFIEX_HW_STATUS_INIT_DONE) { | |
| adapter->hw_status = MWIFIEX_HW_STATUS_READY; | |
| mwifiex_init_fw_complete(adapter); | |
| } | |
| } | |
| /* Check if we need to confirm Sleep Request | |
| received previously */ | |
| if (adapter->ps_state == PS_STATE_PRE_SLEEP) { | |
| if (!adapter->cmd_sent && !adapter->curr_cmd) | |
| mwifiex_check_ps_cond(adapter); | |
| } | |
| /* * The ps_state may have been changed during processing of | |
| * Sleep Request event. | |
| */ | |
| if ((adapter->ps_state == PS_STATE_SLEEP) || | |
| (adapter->ps_state == PS_STATE_PRE_SLEEP) || | |
| (adapter->ps_state == PS_STATE_SLEEP_CFM)) { | |
| continue; | |
| } | |
| if (adapter->tx_lock_flag) { | |
| if (adapter->iface_type == MWIFIEX_USB) { | |
| if (!adapter->usb_mc_setup) | |
| continue; | |
| } else | |
| continue; | |
| } | |
| if (!adapter->cmd_sent && !adapter->curr_cmd && | |
| mwifiex_is_send_cmd_allowed | |
| (mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA))) { | |
| if (mwifiex_exec_next_cmd(adapter) == -1) { | |
| ret = -1; | |
| break; | |
| } | |
| } | |
| /** If USB Multi channel setup ongoing, | |
| * wait for ready to tx data. | |
| */ | |
| if (adapter->iface_type == MWIFIEX_USB && | |
| adapter->usb_mc_setup) | |
| continue; | |
| if ((adapter->scan_chan_gap_enabled || | |
| !adapter->scan_processing) && | |
| !adapter->data_sent && | |
| !skb_queue_empty(&adapter->tx_data_q)) { | |
| mwifiex_process_tx_queue(adapter); | |
| if (adapter->hs_activated) { | |
| adapter->is_hs_configured = false; | |
| mwifiex_hs_activated_event | |
| (mwifiex_get_priv | |
| (adapter, MWIFIEX_BSS_ROLE_ANY), | |
| false); | |
| } | |
| } | |
| if ((adapter->scan_chan_gap_enabled || | |
| !adapter->scan_processing) && | |
| !adapter->data_sent && | |
| !mwifiex_bypass_txlist_empty(adapter) && | |
| !mwifiex_is_tdls_chan_switching | |
| (mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA))) { | |
| mwifiex_process_bypass_tx(adapter); | |
| if (adapter->hs_activated) { | |
| adapter->is_hs_configured = false; | |
| mwifiex_hs_activated_event | |
| (mwifiex_get_priv | |
| (adapter, MWIFIEX_BSS_ROLE_ANY), | |
| false); | |
| } | |
| } | |
| if ((adapter->scan_chan_gap_enabled || | |
| !adapter->scan_processing) && | |
| !adapter->data_sent && !mwifiex_wmm_lists_empty(adapter) && | |
| !mwifiex_is_tdls_chan_switching | |
| (mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA))) { | |
| mwifiex_wmm_process_tx(adapter); | |
| if (adapter->hs_activated) { | |
| adapter->is_hs_configured = false; | |
| mwifiex_hs_activated_event | |
| (mwifiex_get_priv | |
| (adapter, MWIFIEX_BSS_ROLE_ANY), | |
| false); | |
| } | |
| } | |
| if (adapter->delay_null_pkt && !adapter->cmd_sent && | |
| !adapter->curr_cmd && !is_command_pending(adapter) && | |
| (mwifiex_wmm_lists_empty(adapter) && | |
| mwifiex_bypass_txlist_empty(adapter) && | |
| skb_queue_empty(&adapter->tx_data_q))) { | |
| if (!mwifiex_send_null_packet | |
| (mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA), | |
| MWIFIEX_TxPD_POWER_MGMT_NULL_PACKET | | |
| MWIFIEX_TxPD_POWER_MGMT_LAST_PACKET)) { | |
| adapter->delay_null_pkt = false; | |
| adapter->ps_state = PS_STATE_SLEEP; | |
| } | |
| break; | |
| } | |
| } while (true); | |
| spin_lock_irqsave(&adapter->main_proc_lock, flags); | |
| if (adapter->more_task_flag) { | |
| adapter->more_task_flag = false; | |
| spin_unlock_irqrestore(&adapter->main_proc_lock, flags); | |
| goto process_start; | |
| } | |
| adapter->mwifiex_processing = false; | |
| spin_unlock_irqrestore(&adapter->main_proc_lock, flags); | |
| exit_main_proc: | |
| if (adapter->hw_status == MWIFIEX_HW_STATUS_CLOSING) | |
| mwifiex_shutdown_drv(adapter); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(mwifiex_main_process); | |
| /* | |
| * This function frees the adapter structure. | |
| * | |
| * Additionally, this closes the netlink socket, frees the timers | |
| * and private structures. | |
| */ | |
| static void mwifiex_free_adapter(struct mwifiex_adapter *adapter) | |
| { | |
| if (!adapter) { | |
| pr_err("%s: adapter is NULL\n", __func__); | |
| return; | |
| } | |
| mwifiex_unregister(adapter); | |
| pr_debug("info: %s: free adapter\n", __func__); | |
| } | |
| /* | |
| * This function cancels all works in the queue and destroys | |
| * the main workqueue. | |
| */ | |
| static void mwifiex_terminate_workqueue(struct mwifiex_adapter *adapter) | |
| { | |
| if (adapter->workqueue) { | |
| flush_workqueue(adapter->workqueue); | |
| destroy_workqueue(adapter->workqueue); | |
| adapter->workqueue = NULL; | |
| } | |
| if (adapter->rx_workqueue) { | |
| flush_workqueue(adapter->rx_workqueue); | |
| destroy_workqueue(adapter->rx_workqueue); | |
| adapter->rx_workqueue = NULL; | |
| } | |
| } | |
| /* | |
| * This function gets firmware and initializes it. | |
| * | |
| * The main initialization steps followed are - | |
| * - Download the correct firmware to card | |
| * - Issue the init commands to firmware | |
| */ | |
| static void mwifiex_fw_dpc(const struct firmware *firmware, void *context) | |
| { | |
| int ret; | |
| char fmt[64]; | |
| struct mwifiex_private *priv; | |
| struct mwifiex_adapter *adapter = context; | |
| struct mwifiex_fw_image fw; | |
| struct semaphore *sem = adapter->card_sem; | |
| bool init_failed = false; | |
| struct wireless_dev *wdev; | |
| if (!firmware) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "Failed to get firmware %s\n", adapter->fw_name); | |
| goto err_dnld_fw; | |
| } | |
| memset(&fw, 0, sizeof(struct mwifiex_fw_image)); | |
| adapter->firmware = firmware; | |
| fw.fw_buf = (u8 *) adapter->firmware->data; | |
| fw.fw_len = adapter->firmware->size; | |
| if (adapter->if_ops.dnld_fw) { | |
| ret = adapter->if_ops.dnld_fw(adapter, &fw); | |
| } else { | |
| ret = mwifiex_dnld_fw(adapter, &fw); | |
| } | |
| if (ret == -1) | |
| goto err_dnld_fw; | |
| mwifiex_dbg(adapter, MSG, "WLAN FW is active\n"); | |
| if (cal_data_cfg) { | |
| if ((request_firmware(&adapter->cal_data, cal_data_cfg, | |
| adapter->dev)) < 0) | |
| mwifiex_dbg(adapter, ERROR, | |
| "Cal data request_firmware() failed\n"); | |
| } | |
| /* enable host interrupt after fw dnld is successful */ | |
| if (adapter->if_ops.enable_int) { | |
| if (adapter->if_ops.enable_int(adapter)) | |
| goto err_dnld_fw; | |
| } | |
| adapter->init_wait_q_woken = false; | |
| ret = mwifiex_init_fw(adapter); | |
| if (ret == -1) { | |
| goto err_init_fw; | |
| } else if (!ret) { | |
| adapter->hw_status = MWIFIEX_HW_STATUS_READY; | |
| goto done; | |
| } | |
| /* Wait for mwifiex_init to complete */ | |
| if (!adapter->mfg_mode) { | |
| wait_event_interruptible(adapter->init_wait_q, | |
| adapter->init_wait_q_woken); | |
| if (adapter->hw_status != MWIFIEX_HW_STATUS_READY) | |
| goto err_init_fw; | |
| } | |
| priv = adapter->priv[MWIFIEX_BSS_ROLE_STA]; | |
| if (!adapter->wiphy) { | |
| if (mwifiex_register_cfg80211(adapter)) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "cannot register with cfg80211\n"); | |
| goto err_init_fw; | |
| } | |
| } | |
| if (mwifiex_init_channel_scan_gap(adapter)) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "could not init channel stats table\n"); | |
| goto err_init_fw; | |
| } | |
| if (driver_mode) { | |
| driver_mode &= MWIFIEX_DRIVER_MODE_BITMASK; | |
| driver_mode |= MWIFIEX_DRIVER_MODE_STA; | |
| } | |
| rtnl_lock(); | |
| /* Create station interface by default */ | |
| wdev = mwifiex_add_virtual_intf(adapter->wiphy, "mlan%d", NET_NAME_ENUM, | |
| NL80211_IFTYPE_STATION, NULL, NULL); | |
| if (IS_ERR(wdev)) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "cannot create default STA interface\n"); | |
| rtnl_unlock(); | |
| goto err_add_intf; | |
| } | |
| if (driver_mode & MWIFIEX_DRIVER_MODE_UAP) { | |
| wdev = mwifiex_add_virtual_intf(adapter->wiphy, "uap%d", NET_NAME_ENUM, | |
| NL80211_IFTYPE_AP, NULL, NULL); | |
| if (IS_ERR(wdev)) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "cannot create AP interface\n"); | |
| rtnl_unlock(); | |
| goto err_add_intf; | |
| } | |
| } | |
| if (driver_mode & MWIFIEX_DRIVER_MODE_P2P) { | |
| wdev = mwifiex_add_virtual_intf(adapter->wiphy, "p2p%d", NET_NAME_ENUM, | |
| NL80211_IFTYPE_P2P_CLIENT, NULL, | |
| NULL); | |
| if (IS_ERR(wdev)) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "cannot create p2p client interface\n"); | |
| rtnl_unlock(); | |
| goto err_add_intf; | |
| } | |
| } | |
| rtnl_unlock(); | |
| mwifiex_drv_get_driver_version(adapter, fmt, sizeof(fmt) - 1); | |
| mwifiex_dbg(adapter, MSG, "driver_version = %s\n", fmt); | |
| goto done; | |
| err_add_intf: | |
| wiphy_unregister(adapter->wiphy); | |
| wiphy_free(adapter->wiphy); | |
| err_init_fw: | |
| if (adapter->if_ops.disable_int) | |
| adapter->if_ops.disable_int(adapter); | |
| err_dnld_fw: | |
| mwifiex_dbg(adapter, ERROR, | |
| "info: %s: unregister device\n", __func__); | |
| if (adapter->if_ops.unregister_dev) | |
| adapter->if_ops.unregister_dev(adapter); | |
| if (adapter->hw_status == MWIFIEX_HW_STATUS_READY) { | |
| pr_debug("info: %s: shutdown mwifiex\n", __func__); | |
| adapter->init_wait_q_woken = false; | |
| if (mwifiex_shutdown_drv(adapter) == -EINPROGRESS) | |
| wait_event_interruptible(adapter->init_wait_q, | |
| adapter->init_wait_q_woken); | |
| } | |
| adapter->surprise_removed = true; | |
| mwifiex_terminate_workqueue(adapter); | |
| init_failed = true; | |
| done: | |
| if (adapter->cal_data) { | |
| release_firmware(adapter->cal_data); | |
| adapter->cal_data = NULL; | |
| } | |
| if (adapter->firmware) { | |
| release_firmware(adapter->firmware); | |
| adapter->firmware = NULL; | |
| } | |
| if (init_failed) | |
| mwifiex_free_adapter(adapter); | |
| up(sem); | |
| return; | |
| } | |
| /* | |
| * This function initializes the hardware and gets firmware. | |
| */ | |
| static int mwifiex_init_hw_fw(struct mwifiex_adapter *adapter, | |
| bool req_fw_nowait) | |
| { | |
| int ret; | |
| /* Override default firmware with manufacturing one if | |
| * manufacturing mode is enabled | |
| */ | |
| if (mfg_mode) { | |
| if (strlcpy(adapter->fw_name, MFG_FIRMWARE, | |
| sizeof(adapter->fw_name)) >= | |
| sizeof(adapter->fw_name)) { | |
| pr_err("%s: fw_name too long!\n", __func__); | |
| return -1; | |
| } | |
| } | |
| if (req_fw_nowait) { | |
| ret = request_firmware_nowait(THIS_MODULE, 1, adapter->fw_name, | |
| adapter->dev, GFP_KERNEL, adapter, | |
| mwifiex_fw_dpc); | |
| if (ret < 0) | |
| mwifiex_dbg(adapter, ERROR, | |
| "request_firmware_nowait error %d\n", ret); | |
| } else { | |
| ret = request_firmware(&adapter->firmware, | |
| adapter->fw_name, | |
| adapter->dev); | |
| if (ret < 0) | |
| mwifiex_dbg(adapter, ERROR, | |
| "request_firmware error %d\n", ret); | |
| else | |
| mwifiex_fw_dpc(adapter->firmware, (void *)adapter); | |
| } | |
| return ret; | |
| } | |
| /* | |
| * CFG802.11 network device handler for open. | |
| * | |
| * Starts the data queue. | |
| */ | |
| static int | |
| mwifiex_open(struct net_device *dev) | |
| { | |
| netif_carrier_off(dev); | |
| return 0; | |
| } | |
| /* | |
| * CFG802.11 network device handler for close. | |
| */ | |
| static int | |
| mwifiex_close(struct net_device *dev) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| if (priv->scan_request) { | |
| struct cfg80211_scan_info info = { | |
| .aborted = true, | |
| }; | |
| mwifiex_dbg(priv->adapter, INFO, | |
| "aborting scan on ndo_stop\n"); | |
| cfg80211_scan_done(priv->scan_request, &info); | |
| priv->scan_request = NULL; | |
| priv->scan_aborting = true; | |
| } | |
| if (priv->sched_scanning) { | |
| mwifiex_dbg(priv->adapter, INFO, | |
| "aborting bgscan on ndo_stop\n"); | |
| mwifiex_stop_bg_scan(priv); | |
| cfg80211_sched_scan_stopped(priv->wdev.wiphy); | |
| } | |
| return 0; | |
| } | |
| static bool | |
| mwifiex_bypass_tx_queue(struct mwifiex_private *priv, | |
| struct sk_buff *skb) | |
| { | |
| struct ethhdr *eth_hdr = (struct ethhdr *)skb->data; | |
| if (ntohs(eth_hdr->h_proto) == ETH_P_PAE || | |
| mwifiex_is_skb_mgmt_frame(skb) || | |
| (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA && | |
| ISSUPP_TDLS_ENABLED(priv->adapter->fw_cap_info) && | |
| (ntohs(eth_hdr->h_proto) == ETH_P_TDLS))) { | |
| mwifiex_dbg(priv->adapter, DATA, | |
| "bypass txqueue; eth type %#x, mgmt %d\n", | |
| ntohs(eth_hdr->h_proto), | |
| mwifiex_is_skb_mgmt_frame(skb)); | |
| return true; | |
| } | |
| return false; | |
| } | |
| /* | |
| * Add buffer into wmm tx queue and queue work to transmit it. | |
| */ | |
| int mwifiex_queue_tx_pkt(struct mwifiex_private *priv, struct sk_buff *skb) | |
| { | |
| struct netdev_queue *txq; | |
| int index = mwifiex_1d_to_wmm_queue[skb->priority]; | |
| if (atomic_inc_return(&priv->wmm_tx_pending[index]) >= MAX_TX_PENDING) { | |
| txq = netdev_get_tx_queue(priv->netdev, index); | |
| if (!netif_tx_queue_stopped(txq)) { | |
| netif_tx_stop_queue(txq); | |
| mwifiex_dbg(priv->adapter, DATA, | |
| "stop queue: %d\n", index); | |
| } | |
| } | |
| if (mwifiex_bypass_tx_queue(priv, skb)) { | |
| atomic_inc(&priv->adapter->tx_pending); | |
| atomic_inc(&priv->adapter->bypass_tx_pending); | |
| mwifiex_wmm_add_buf_bypass_txqueue(priv, skb); | |
| } else { | |
| atomic_inc(&priv->adapter->tx_pending); | |
| mwifiex_wmm_add_buf_txqueue(priv, skb); | |
| } | |
| mwifiex_queue_main_work(priv->adapter); | |
| return 0; | |
| } | |
| struct sk_buff * | |
| mwifiex_clone_skb_for_tx_status(struct mwifiex_private *priv, | |
| struct sk_buff *skb, u8 flag, u64 *cookie) | |
| { | |
| struct sk_buff *orig_skb = skb; | |
| struct mwifiex_txinfo *tx_info, *orig_tx_info; | |
| skb = skb_clone(skb, GFP_ATOMIC); | |
| if (skb) { | |
| unsigned long flags; | |
| int id; | |
| spin_lock_irqsave(&priv->ack_status_lock, flags); | |
| id = idr_alloc(&priv->ack_status_frames, orig_skb, | |
| 1, 0x10, GFP_ATOMIC); | |
| spin_unlock_irqrestore(&priv->ack_status_lock, flags); | |
| if (id >= 0) { | |
| tx_info = MWIFIEX_SKB_TXCB(skb); | |
| tx_info->ack_frame_id = id; | |
| tx_info->flags |= flag; | |
| orig_tx_info = MWIFIEX_SKB_TXCB(orig_skb); | |
| orig_tx_info->ack_frame_id = id; | |
| orig_tx_info->flags |= flag; | |
| if (flag == MWIFIEX_BUF_FLAG_ACTION_TX_STATUS && cookie) | |
| orig_tx_info->cookie = *cookie; | |
| } else if (skb_shared(skb)) { | |
| kfree_skb(orig_skb); | |
| } else { | |
| kfree_skb(skb); | |
| skb = orig_skb; | |
| } | |
| } else { | |
| /* couldn't clone -- lose tx status ... */ | |
| skb = orig_skb; | |
| } | |
| return skb; | |
| } | |
| /* | |
| * CFG802.11 network device handler for data transmission. | |
| */ | |
| static int | |
| mwifiex_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| struct sk_buff *new_skb; | |
| struct mwifiex_txinfo *tx_info; | |
| bool multicast; | |
| mwifiex_dbg(priv->adapter, DATA, | |
| "data: %lu BSS(%d-%d): Data <= kernel\n", | |
| jiffies, priv->bss_type, priv->bss_num); | |
| if (priv->adapter->surprise_removed) { | |
| kfree_skb(skb); | |
| priv->stats.tx_dropped++; | |
| return 0; | |
| } | |
| if (!skb->len || (skb->len > ETH_FRAME_LEN)) { | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "Tx: bad skb len %d\n", skb->len); | |
| kfree_skb(skb); | |
| priv->stats.tx_dropped++; | |
| return 0; | |
| } | |
| if (skb_headroom(skb) < MWIFIEX_MIN_DATA_HEADER_LEN) { | |
| mwifiex_dbg(priv->adapter, DATA, | |
| "data: Tx: insufficient skb headroom %d\n", | |
| skb_headroom(skb)); | |
| /* Insufficient skb headroom - allocate a new skb */ | |
| new_skb = | |
| skb_realloc_headroom(skb, MWIFIEX_MIN_DATA_HEADER_LEN); | |
| if (unlikely(!new_skb)) { | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "Tx: cannot alloca new_skb\n"); | |
| kfree_skb(skb); | |
| priv->stats.tx_dropped++; | |
| return 0; | |
| } | |
| kfree_skb(skb); | |
| skb = new_skb; | |
| mwifiex_dbg(priv->adapter, INFO, | |
| "info: new skb headroomd %d\n", | |
| skb_headroom(skb)); | |
| } | |
| tx_info = MWIFIEX_SKB_TXCB(skb); | |
| memset(tx_info, 0, sizeof(*tx_info)); | |
| tx_info->bss_num = priv->bss_num; | |
| tx_info->bss_type = priv->bss_type; | |
| tx_info->pkt_len = skb->len; | |
| multicast = is_multicast_ether_addr(skb->data); | |
| if (unlikely(!multicast && skb->sk && | |
| skb_shinfo(skb)->tx_flags & SKBTX_WIFI_STATUS && | |
| priv->adapter->fw_api_ver == MWIFIEX_FW_V15)) | |
| skb = mwifiex_clone_skb_for_tx_status(priv, | |
| skb, | |
| MWIFIEX_BUF_FLAG_EAPOL_TX_STATUS, NULL); | |
| /* Record the current time the packet was queued; used to | |
| * determine the amount of time the packet was queued in | |
| * the driver before it was sent to the firmware. | |
| * The delay is then sent along with the packet to the | |
| * firmware for aggregate delay calculation for stats and | |
| * MSDU lifetime expiry. | |
| */ | |
| __net_timestamp(skb); | |
| if (ISSUPP_TDLS_ENABLED(priv->adapter->fw_cap_info) && | |
| priv->bss_type == MWIFIEX_BSS_TYPE_STA && | |
| !ether_addr_equal_unaligned(priv->cfg_bssid, skb->data)) { | |
| if (priv->adapter->auto_tdls && priv->check_tdls_tx) | |
| mwifiex_tdls_check_tx(priv, skb); | |
| } | |
| mwifiex_queue_tx_pkt(priv, skb); | |
| return 0; | |
| } | |
| /* | |
| * CFG802.11 network device handler for setting MAC address. | |
| */ | |
| static int | |
| mwifiex_set_mac_address(struct net_device *dev, void *addr) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| struct sockaddr *hw_addr = addr; | |
| int ret; | |
| memcpy(priv->curr_addr, hw_addr->sa_data, ETH_ALEN); | |
| /* Send request to firmware */ | |
| ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_MAC_ADDRESS, | |
| HostCmd_ACT_GEN_SET, 0, NULL, true); | |
| if (!ret) | |
| memcpy(priv->netdev->dev_addr, priv->curr_addr, ETH_ALEN); | |
| else | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "set mac address failed: ret=%d\n", ret); | |
| memcpy(dev->dev_addr, priv->curr_addr, ETH_ALEN); | |
| return ret; | |
| } | |
| /* | |
| * CFG802.11 network device handler for setting multicast list. | |
| */ | |
| static void mwifiex_set_multicast_list(struct net_device *dev) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| struct mwifiex_multicast_list mcast_list; | |
| if (dev->flags & IFF_PROMISC) { | |
| mcast_list.mode = MWIFIEX_PROMISC_MODE; | |
| } else if (dev->flags & IFF_ALLMULTI || | |
| netdev_mc_count(dev) > MWIFIEX_MAX_MULTICAST_LIST_SIZE) { | |
| mcast_list.mode = MWIFIEX_ALL_MULTI_MODE; | |
| } else { | |
| mcast_list.mode = MWIFIEX_MULTICAST_MODE; | |
| mcast_list.num_multicast_addr = | |
| mwifiex_copy_mcast_addr(&mcast_list, dev); | |
| } | |
| mwifiex_request_set_multicast_list(priv, &mcast_list); | |
| } | |
| /* | |
| * CFG802.11 network device handler for transmission timeout. | |
| */ | |
| static void | |
| mwifiex_tx_timeout(struct net_device *dev) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| priv->num_tx_timeout++; | |
| priv->tx_timeout_cnt++; | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "%lu : Tx timeout(#%d), bss_type-num = %d-%d\n", | |
| jiffies, priv->tx_timeout_cnt, priv->bss_type, | |
| priv->bss_num); | |
| mwifiex_set_trans_start(dev); | |
| if (priv->tx_timeout_cnt > TX_TIMEOUT_THRESHOLD && | |
| priv->adapter->if_ops.card_reset) { | |
| mwifiex_dbg(priv->adapter, ERROR, | |
| "tx_timeout_cnt exceeds threshold.\t" | |
| "Triggering card reset!\n"); | |
| priv->adapter->if_ops.card_reset(priv->adapter); | |
| } | |
| } | |
| void mwifiex_multi_chan_resync(struct mwifiex_adapter *adapter) | |
| { | |
| struct usb_card_rec *card = adapter->card; | |
| struct mwifiex_private *priv; | |
| u16 tx_buf_size; | |
| int i, ret; | |
| card->mc_resync_flag = true; | |
| for (i = 0; i < MWIFIEX_TX_DATA_PORT; i++) { | |
| if (atomic_read(&card->port[i].tx_data_urb_pending)) { | |
| mwifiex_dbg(adapter, WARN, "pending data urb in sys\n"); | |
| return; | |
| } | |
| } | |
| card->mc_resync_flag = false; | |
| tx_buf_size = 0xffff; | |
| priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY); | |
| ret = mwifiex_send_cmd(priv, HostCmd_CMD_RECONFIGURE_TX_BUFF, | |
| HostCmd_ACT_GEN_SET, 0, &tx_buf_size, false); | |
| if (ret) | |
| mwifiex_dbg(adapter, ERROR, | |
| "send reconfig tx buf size cmd err\n"); | |
| } | |
| EXPORT_SYMBOL_GPL(mwifiex_multi_chan_resync); | |
| void mwifiex_drv_info_dump(struct mwifiex_adapter *adapter) | |
| { | |
| void *p; | |
| char drv_version[64]; | |
| struct usb_card_rec *cardp; | |
| struct sdio_mmc_card *sdio_card; | |
| struct mwifiex_private *priv; | |
| int i, idx; | |
| struct netdev_queue *txq; | |
| struct mwifiex_debug_info *debug_info; | |
| if (adapter->drv_info_dump) { | |
| vfree(adapter->drv_info_dump); | |
| adapter->drv_info_dump = NULL; | |
| adapter->drv_info_size = 0; | |
| } | |
| mwifiex_dbg(adapter, MSG, "===mwifiex driverinfo dump start===\n"); | |
| adapter->drv_info_dump = vzalloc(MWIFIEX_DRV_INFO_SIZE_MAX); | |
| if (!adapter->drv_info_dump) | |
| return; | |
| p = (char *)(adapter->drv_info_dump); | |
| p += sprintf(p, "driver_name = " "\"mwifiex\"\n"); | |
| mwifiex_drv_get_driver_version(adapter, drv_version, | |
| sizeof(drv_version) - 1); | |
| p += sprintf(p, "driver_version = %s\n", drv_version); | |
| if (adapter->iface_type == MWIFIEX_USB) { | |
| cardp = (struct usb_card_rec *)adapter->card; | |
| p += sprintf(p, "tx_cmd_urb_pending = %d\n", | |
| atomic_read(&cardp->tx_cmd_urb_pending)); | |
| p += sprintf(p, "tx_data_urb_pending_port_0 = %d\n", | |
| atomic_read(&cardp->port[0].tx_data_urb_pending)); | |
| p += sprintf(p, "tx_data_urb_pending_port_1 = %d\n", | |
| atomic_read(&cardp->port[1].tx_data_urb_pending)); | |
| p += sprintf(p, "rx_cmd_urb_pending = %d\n", | |
| atomic_read(&cardp->rx_cmd_urb_pending)); | |
| p += sprintf(p, "rx_data_urb_pending = %d\n", | |
| atomic_read(&cardp->rx_data_urb_pending)); | |
| } | |
| p += sprintf(p, "tx_pending = %d\n", | |
| atomic_read(&adapter->tx_pending)); | |
| p += sprintf(p, "rx_pending = %d\n", | |
| atomic_read(&adapter->rx_pending)); | |
| if (adapter->iface_type == MWIFIEX_SDIO) { | |
| sdio_card = (struct sdio_mmc_card *)adapter->card; | |
| p += sprintf(p, "\nmp_rd_bitmap=0x%x curr_rd_port=0x%x\n", | |
| sdio_card->mp_rd_bitmap, sdio_card->curr_rd_port); | |
| p += sprintf(p, "mp_wr_bitmap=0x%x curr_wr_port=0x%x\n", | |
| sdio_card->mp_wr_bitmap, sdio_card->curr_wr_port); | |
| } | |
| for (i = 0; i < adapter->priv_num; i++) { | |
| if (!adapter->priv[i] || !adapter->priv[i]->netdev) | |
| continue; | |
| priv = adapter->priv[i]; | |
| p += sprintf(p, "\n[interface : \"%s\"]\n", | |
| priv->netdev->name); | |
| p += sprintf(p, "wmm_tx_pending[0] = %d\n", | |
| atomic_read(&priv->wmm_tx_pending[0])); | |
| p += sprintf(p, "wmm_tx_pending[1] = %d\n", | |
| atomic_read(&priv->wmm_tx_pending[1])); | |
| p += sprintf(p, "wmm_tx_pending[2] = %d\n", | |
| atomic_read(&priv->wmm_tx_pending[2])); | |
| p += sprintf(p, "wmm_tx_pending[3] = %d\n", | |
| atomic_read(&priv->wmm_tx_pending[3])); | |
| p += sprintf(p, "media_state=\"%s\"\n", !priv->media_connected ? | |
| "Disconnected" : "Connected"); | |
| p += sprintf(p, "carrier %s\n", (netif_carrier_ok(priv->netdev) | |
| ? "on" : "off")); | |
| for (idx = 0; idx < priv->netdev->num_tx_queues; idx++) { | |
| txq = netdev_get_tx_queue(priv->netdev, idx); | |
| p += sprintf(p, "tx queue %d:%s ", idx, | |
| netif_tx_queue_stopped(txq) ? | |
| "stopped" : "started"); | |
| } | |
| p += sprintf(p, "\n%s: num_tx_timeout = %d\n", | |
| priv->netdev->name, priv->num_tx_timeout); | |
| } | |
| if (adapter->iface_type == MWIFIEX_SDIO || | |
| adapter->iface_type == MWIFIEX_PCIE) { | |
| p += sprintf(p, "\n=== %s register dump===\n", | |
| adapter->iface_type == MWIFIEX_SDIO ? | |
| "SDIO" : "PCIE"); | |
| if (adapter->if_ops.reg_dump) | |
| p += adapter->if_ops.reg_dump(adapter, p); | |
| } | |
| p += sprintf(p, "\n=== more debug information\n"); | |
| debug_info = kzalloc(sizeof(*debug_info), GFP_KERNEL); | |
| if (debug_info) { | |
| for (i = 0; i < adapter->priv_num; i++) { | |
| if (!adapter->priv[i] || !adapter->priv[i]->netdev) | |
| continue; | |
| priv = adapter->priv[i]; | |
| mwifiex_get_debug_info(priv, debug_info); | |
| p += mwifiex_debug_info_to_buffer(priv, p, debug_info); | |
| break; | |
| } | |
| kfree(debug_info); | |
| } | |
| adapter->drv_info_size = p - adapter->drv_info_dump; | |
| mwifiex_dbg(adapter, MSG, "===mwifiex driverinfo dump end===\n"); | |
| } | |
| EXPORT_SYMBOL_GPL(mwifiex_drv_info_dump); | |
| void mwifiex_upload_device_dump(struct mwifiex_adapter *adapter) | |
| { | |
| u8 idx, *dump_data, *fw_dump_ptr; | |
| u32 dump_len; | |
| dump_len = (strlen("========Start dump driverinfo========\n") + | |
| adapter->drv_info_size + | |
| strlen("\n========End dump========\n")); | |
| for (idx = 0; idx < adapter->num_mem_types; idx++) { | |
| struct memory_type_mapping *entry = | |
| &adapter->mem_type_mapping_tbl[idx]; | |
| if (entry->mem_ptr) { | |
| dump_len += (strlen("========Start dump ") + | |
| strlen(entry->mem_name) + | |
| strlen("========\n") + | |
| (entry->mem_size + 1) + | |
| strlen("\n========End dump========\n")); | |
| } | |
| } | |
| dump_data = vzalloc(dump_len + 1); | |
| if (!dump_data) | |
| goto done; | |
| fw_dump_ptr = dump_data; | |
| /* Dump all the memory data into single file, a userspace script will | |
| * be used to split all the memory data to multiple files | |
| */ | |
| mwifiex_dbg(adapter, MSG, | |
| "== mwifiex dump information to /sys/class/devcoredump start"); | |
| strcpy(fw_dump_ptr, "========Start dump driverinfo========\n"); | |
| fw_dump_ptr += strlen("========Start dump driverinfo========\n"); | |
| memcpy(fw_dump_ptr, adapter->drv_info_dump, adapter->drv_info_size); | |
| fw_dump_ptr += adapter->drv_info_size; | |
| strcpy(fw_dump_ptr, "\n========End dump========\n"); | |
| fw_dump_ptr += strlen("\n========End dump========\n"); | |
| for (idx = 0; idx < adapter->num_mem_types; idx++) { | |
| struct memory_type_mapping *entry = | |
| &adapter->mem_type_mapping_tbl[idx]; | |
| if (entry->mem_ptr) { | |
| strcpy(fw_dump_ptr, "========Start dump "); | |
| fw_dump_ptr += strlen("========Start dump "); | |
| strcpy(fw_dump_ptr, entry->mem_name); | |
| fw_dump_ptr += strlen(entry->mem_name); | |
| strcpy(fw_dump_ptr, "========\n"); | |
| fw_dump_ptr += strlen("========\n"); | |
| memcpy(fw_dump_ptr, entry->mem_ptr, entry->mem_size); | |
| fw_dump_ptr += entry->mem_size; | |
| strcpy(fw_dump_ptr, "\n========End dump========\n"); | |
| fw_dump_ptr += strlen("\n========End dump========\n"); | |
| } | |
| } | |
| /* device dump data will be free in device coredump release function | |
| * after 5 min | |
| */ | |
| dev_coredumpv(adapter->dev, dump_data, dump_len, GFP_KERNEL); | |
| mwifiex_dbg(adapter, MSG, | |
| "== mwifiex dump information to /sys/class/devcoredump end"); | |
| done: | |
| for (idx = 0; idx < adapter->num_mem_types; idx++) { | |
| struct memory_type_mapping *entry = | |
| &adapter->mem_type_mapping_tbl[idx]; | |
| if (entry->mem_ptr) { | |
| vfree(entry->mem_ptr); | |
| entry->mem_ptr = NULL; | |
| } | |
| entry->mem_size = 0; | |
| } | |
| if (adapter->drv_info_dump) { | |
| vfree(adapter->drv_info_dump); | |
| adapter->drv_info_dump = NULL; | |
| adapter->drv_info_size = 0; | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(mwifiex_upload_device_dump); | |
| /* | |
| * CFG802.11 network device handler for statistics retrieval. | |
| */ | |
| static struct net_device_stats *mwifiex_get_stats(struct net_device *dev) | |
| { | |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); | |
| return &priv->stats; | |
| } | |
| static u16 | |
| mwifiex_netdev_select_wmm_queue(struct net_device *dev, struct sk_buff *skb, | |
| void *accel_priv, select_queue_fallback_t fallback) | |
| { | |
| skb->priority = cfg80211_classify8021d(skb, NULL); | |
| return mwifiex_1d_to_wmm_queue[skb->priority]; | |
| } | |
| /* Network device handlers */ | |
| static const struct net_device_ops mwifiex_netdev_ops = { | |
| .ndo_open = mwifiex_open, | |
| .ndo_stop = mwifiex_close, | |
| .ndo_start_xmit = mwifiex_hard_start_xmit, | |
| .ndo_set_mac_address = mwifiex_set_mac_address, | |
| .ndo_validate_addr = eth_validate_addr, | |
| .ndo_tx_timeout = mwifiex_tx_timeout, | |
| .ndo_get_stats = mwifiex_get_stats, | |
| .ndo_set_rx_mode = mwifiex_set_multicast_list, | |
| .ndo_select_queue = mwifiex_netdev_select_wmm_queue, | |
| }; | |
| /* | |
| * This function initializes the private structure parameters. | |
| * | |
| * The following wait queues are initialized - | |
| * - IOCTL wait queue | |
| * - Command wait queue | |
| * - Statistics wait queue | |
| * | |
| * ...and the following default parameters are set - | |
| * - Current key index : Set to 0 | |
| * - Rate index : Set to auto | |
| * - Media connected : Set to disconnected | |
| * - Adhoc link sensed : Set to false | |
| * - Nick name : Set to null | |
| * - Number of Tx timeout : Set to 0 | |
| * - Device address : Set to current address | |
| * - Rx histogram statistc : Set to 0 | |
| * | |
| * In addition, the CFG80211 work queue is also created. | |
| */ | |
| void mwifiex_init_priv_params(struct mwifiex_private *priv, | |
| struct net_device *dev) | |
| { | |
| dev->netdev_ops = &mwifiex_netdev_ops; | |
| dev->destructor = free_netdev; | |
| /* Initialize private structure */ | |
| priv->current_key_index = 0; | |
| priv->media_connected = false; | |
| memset(priv->mgmt_ie, 0, | |
| sizeof(struct mwifiex_ie) * MAX_MGMT_IE_INDEX); | |
| priv->beacon_idx = MWIFIEX_AUTO_IDX_MASK; | |
| priv->proberesp_idx = MWIFIEX_AUTO_IDX_MASK; | |
| priv->assocresp_idx = MWIFIEX_AUTO_IDX_MASK; | |
| priv->gen_idx = MWIFIEX_AUTO_IDX_MASK; | |
| priv->num_tx_timeout = 0; | |
| ether_addr_copy(priv->curr_addr, priv->adapter->perm_addr); | |
| memcpy(dev->dev_addr, priv->curr_addr, ETH_ALEN); | |
| if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA || | |
| GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_UAP) { | |
| priv->hist_data = kmalloc(sizeof(*priv->hist_data), GFP_KERNEL); | |
| if (priv->hist_data) | |
| mwifiex_hist_data_reset(priv); | |
| } | |
| } | |
| /* | |
| * This function check if command is pending. | |
| */ | |
| int is_command_pending(struct mwifiex_adapter *adapter) | |
| { | |
| unsigned long flags; | |
| int is_cmd_pend_q_empty; | |
| spin_lock_irqsave(&adapter->cmd_pending_q_lock, flags); | |
| is_cmd_pend_q_empty = list_empty(&adapter->cmd_pending_q); | |
| spin_unlock_irqrestore(&adapter->cmd_pending_q_lock, flags); | |
| return !is_cmd_pend_q_empty; | |
| } | |
| /* | |
| * This is the RX work queue function. | |
| * | |
| * It handles the RX operations. | |
| */ | |
| static void mwifiex_rx_work_queue(struct work_struct *work) | |
| { | |
| struct mwifiex_adapter *adapter = | |
| container_of(work, struct mwifiex_adapter, rx_work); | |
| if (adapter->surprise_removed) | |
| return; | |
| mwifiex_process_rx(adapter); | |
| } | |
| /* | |
| * This is the main work queue function. | |
| * | |
| * It handles the main process, which in turn handles the complete | |
| * driver operations. | |
| */ | |
| static void mwifiex_main_work_queue(struct work_struct *work) | |
| { | |
| struct mwifiex_adapter *adapter = | |
| container_of(work, struct mwifiex_adapter, main_work); | |
| if (adapter->surprise_removed) | |
| return; | |
| mwifiex_main_process(adapter); | |
| } | |
| /* | |
| * This function gets called during PCIe function level reset. Required | |
| * code is extracted from mwifiex_remove_card() | |
| */ | |
| static int | |
| mwifiex_shutdown_sw(struct mwifiex_adapter *adapter, struct semaphore *sem) | |
| { | |
| struct mwifiex_private *priv; | |
| int i; | |
| if (!adapter) | |
| goto exit_return; | |
| if (down_interruptible(sem)) | |
| goto exit_sem_err; | |
| priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY); | |
| mwifiex_deauthenticate(priv, NULL); | |
| /* We can no longer handle interrupts once we start doing the teardown | |
| * below. | |
| */ | |
| if (adapter->if_ops.disable_int) | |
| adapter->if_ops.disable_int(adapter); | |
| adapter->surprise_removed = true; | |
| mwifiex_terminate_workqueue(adapter); | |
| /* Stop data */ | |
| for (i = 0; i < adapter->priv_num; i++) { | |
| priv = adapter->priv[i]; | |
| if (priv && priv->netdev) { | |
| mwifiex_stop_net_dev_queue(priv->netdev, adapter); | |
| if (netif_carrier_ok(priv->netdev)) | |
| netif_carrier_off(priv->netdev); | |
| netif_device_detach(priv->netdev); | |
| } | |
| } | |
| mwifiex_dbg(adapter, CMD, "cmd: calling mwifiex_shutdown_drv...\n"); | |
| adapter->init_wait_q_woken = false; | |
| if (mwifiex_shutdown_drv(adapter) == -EINPROGRESS) | |
| wait_event_interruptible(adapter->init_wait_q, | |
| adapter->init_wait_q_woken); | |
| if (adapter->if_ops.down_dev) | |
| adapter->if_ops.down_dev(adapter); | |
| mwifiex_dbg(adapter, CMD, "cmd: mwifiex_shutdown_drv done\n"); | |
| if (atomic_read(&adapter->rx_pending) || | |
| atomic_read(&adapter->tx_pending) || | |
| atomic_read(&adapter->cmd_pending)) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "rx_pending=%d, tx_pending=%d,\t" | |
| "cmd_pending=%d\n", | |
| atomic_read(&adapter->rx_pending), | |
| atomic_read(&adapter->tx_pending), | |
| atomic_read(&adapter->cmd_pending)); | |
| } | |
| for (i = 0; i < adapter->priv_num; i++) { | |
| priv = adapter->priv[i]; | |
| if (!priv) | |
| continue; | |
| rtnl_lock(); | |
| if (priv->netdev && | |
| priv->wdev.iftype != NL80211_IFTYPE_UNSPECIFIED) | |
| mwifiex_del_virtual_intf(adapter->wiphy, &priv->wdev); | |
| rtnl_unlock(); | |
| } | |
| up(sem); | |
| exit_sem_err: | |
| mwifiex_dbg(adapter, INFO, "%s, successful\n", __func__); | |
| exit_return: | |
| return 0; | |
| } | |
| /* This function gets called during PCIe function level reset. Required | |
| * code is extracted from mwifiex_add_card() | |
| */ | |
| static int | |
| mwifiex_reinit_sw(struct mwifiex_adapter *adapter, struct semaphore *sem, | |
| struct mwifiex_if_ops *if_ops, u8 iface_type) | |
| { | |
| char fw_name[32]; | |
| struct pcie_service_card *card = adapter->card; | |
| if (down_interruptible(sem)) | |
| goto exit_sem_err; | |
| mwifiex_init_lock_list(adapter); | |
| if (adapter->if_ops.up_dev) | |
| adapter->if_ops.up_dev(adapter); | |
| adapter->iface_type = iface_type; | |
| adapter->card_sem = sem; | |
| adapter->hw_status = MWIFIEX_HW_STATUS_INITIALIZING; | |
| adapter->surprise_removed = false; | |
| init_waitqueue_head(&adapter->init_wait_q); | |
| adapter->is_suspended = false; | |
| adapter->hs_activated = false; | |
| init_waitqueue_head(&adapter->hs_activate_wait_q); | |
| init_waitqueue_head(&adapter->cmd_wait_q.wait); | |
| adapter->cmd_wait_q.status = 0; | |
| adapter->scan_wait_q_woken = false; | |
| if ((num_possible_cpus() > 1) || adapter->iface_type == MWIFIEX_USB) | |
| adapter->rx_work_enabled = true; | |
| adapter->workqueue = | |
| alloc_workqueue("MWIFIEX_WORK_QUEUE", | |
| WQ_HIGHPRI | WQ_MEM_RECLAIM | WQ_UNBOUND, 1); | |
| if (!adapter->workqueue) | |
| goto err_kmalloc; | |
| INIT_WORK(&adapter->main_work, mwifiex_main_work_queue); | |
| if (adapter->rx_work_enabled) { | |
| adapter->rx_workqueue = alloc_workqueue("MWIFIEX_RX_WORK_QUEUE", | |
| WQ_HIGHPRI | | |
| WQ_MEM_RECLAIM | | |
| WQ_UNBOUND, 1); | |
| if (!adapter->rx_workqueue) | |
| goto err_kmalloc; | |
| INIT_WORK(&adapter->rx_work, mwifiex_rx_work_queue); | |
| } | |
| /* Register the device. Fill up the private data structure with | |
| * relevant information from the card. Some code extracted from | |
| * mwifiex_register_dev() | |
| */ | |
| mwifiex_dbg(adapter, INFO, "%s, mwifiex_init_hw_fw()...\n", __func__); | |
| strcpy(fw_name, adapter->fw_name); | |
| strcpy(adapter->fw_name, PCIE8997_DEFAULT_WIFIFW_NAME); | |
| adapter->tx_buf_size = card->pcie.tx_buf_size; | |
| adapter->ext_scan = card->pcie.can_ext_scan; | |
| if (mwifiex_init_hw_fw(adapter, false)) { | |
| strcpy(adapter->fw_name, fw_name); | |
| mwifiex_dbg(adapter, ERROR, | |
| "%s: firmware init failed\n", __func__); | |
| goto err_init_fw; | |
| } | |
| strcpy(adapter->fw_name, fw_name); | |
| mwifiex_dbg(adapter, INFO, "%s, successful\n", __func__); | |
| up(sem); | |
| return 0; | |
| err_init_fw: | |
| mwifiex_dbg(adapter, ERROR, "info: %s: unregister device\n", __func__); | |
| if (adapter->if_ops.unregister_dev) | |
| adapter->if_ops.unregister_dev(adapter); | |
| if (adapter->hw_status == MWIFIEX_HW_STATUS_READY) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "info: %s: shutdown mwifiex\n", __func__); | |
| adapter->init_wait_q_woken = false; | |
| if (mwifiex_shutdown_drv(adapter) == -EINPROGRESS) | |
| wait_event_interruptible(adapter->init_wait_q, | |
| adapter->init_wait_q_woken); | |
| } | |
| err_kmalloc: | |
| mwifiex_terminate_workqueue(adapter); | |
| adapter->surprise_removed = true; | |
| up(sem); | |
| exit_sem_err: | |
| mwifiex_dbg(adapter, INFO, "%s, error\n", __func__); | |
| return -1; | |
| } | |
| /* This function processes pre and post PCIe function level resets. | |
| * It performs software cleanup without touching PCIe specific code. | |
| * Also, during initialization PCIe stuff is skipped. | |
| */ | |
| void mwifiex_do_flr(struct mwifiex_adapter *adapter, bool prepare) | |
| { | |
| struct mwifiex_if_ops if_ops; | |
| if (!prepare) { | |
| mwifiex_reinit_sw(adapter, adapter->card_sem, &if_ops, | |
| adapter->iface_type); | |
| } else { | |
| memcpy(&if_ops, &adapter->if_ops, | |
| sizeof(struct mwifiex_if_ops)); | |
| mwifiex_shutdown_sw(adapter, adapter->card_sem); | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(mwifiex_do_flr); | |
| /* | |
| * This function adds the card. | |
| * | |
| * This function follows the following major steps to set up the device - | |
| * - Initialize software. This includes probing the card, registering | |
| * the interface operations table, and allocating/initializing the | |
| * adapter structure | |
| * - Set up the netlink socket | |
| * - Create and start the main work queue | |
| * - Register the device | |
| * - Initialize firmware and hardware | |
| * - Add logical interfaces | |
| */ | |
| int | |
| mwifiex_add_card(void *card, struct semaphore *sem, | |
| struct mwifiex_if_ops *if_ops, u8 iface_type) | |
| { | |
| struct mwifiex_adapter *adapter; | |
| if (down_interruptible(sem)) | |
| goto exit_sem_err; | |
| if (mwifiex_register(card, if_ops, (void **)&adapter)) { | |
| pr_err("%s: software init failed\n", __func__); | |
| goto err_init_sw; | |
| } | |
| adapter->iface_type = iface_type; | |
| adapter->card_sem = sem; | |
| adapter->hw_status = MWIFIEX_HW_STATUS_INITIALIZING; | |
| adapter->surprise_removed = false; | |
| init_waitqueue_head(&adapter->init_wait_q); | |
| adapter->is_suspended = false; | |
| adapter->hs_activated = false; | |
| init_waitqueue_head(&adapter->hs_activate_wait_q); | |
| init_waitqueue_head(&adapter->cmd_wait_q.wait); | |
| adapter->cmd_wait_q.status = 0; | |
| adapter->scan_wait_q_woken = false; | |
| if ((num_possible_cpus() > 1) || adapter->iface_type == MWIFIEX_USB) { | |
| adapter->rx_work_enabled = true; | |
| pr_notice("rx work enabled, cpus %d\n", num_possible_cpus()); | |
| } | |
| adapter->workqueue = | |
| alloc_workqueue("MWIFIEX_WORK_QUEUE", | |
| WQ_HIGHPRI | WQ_MEM_RECLAIM | WQ_UNBOUND, 1); | |
| if (!adapter->workqueue) | |
| goto err_kmalloc; | |
| INIT_WORK(&adapter->main_work, mwifiex_main_work_queue); | |
| if (adapter->rx_work_enabled) { | |
| adapter->rx_workqueue = alloc_workqueue("MWIFIEX_RX_WORK_QUEUE", | |
| WQ_HIGHPRI | | |
| WQ_MEM_RECLAIM | | |
| WQ_UNBOUND, 1); | |
| if (!adapter->rx_workqueue) | |
| goto err_kmalloc; | |
| INIT_WORK(&adapter->rx_work, mwifiex_rx_work_queue); | |
| } | |
| /* Register the device. Fill up the private data structure with relevant | |
| information from the card. */ | |
| if (adapter->if_ops.register_dev(adapter)) { | |
| pr_err("%s: failed to register mwifiex device\n", __func__); | |
| goto err_registerdev; | |
| } | |
| if (mwifiex_init_hw_fw(adapter, true)) { | |
| pr_err("%s: firmware init failed\n", __func__); | |
| goto err_init_fw; | |
| } | |
| return 0; | |
| err_init_fw: | |
| pr_debug("info: %s: unregister device\n", __func__); | |
| if (adapter->if_ops.unregister_dev) | |
| adapter->if_ops.unregister_dev(adapter); | |
| if (adapter->hw_status == MWIFIEX_HW_STATUS_READY) { | |
| pr_debug("info: %s: shutdown mwifiex\n", __func__); | |
| adapter->init_wait_q_woken = false; | |
| if (mwifiex_shutdown_drv(adapter) == -EINPROGRESS) | |
| wait_event_interruptible(adapter->init_wait_q, | |
| adapter->init_wait_q_woken); | |
| } | |
| err_registerdev: | |
| adapter->surprise_removed = true; | |
| mwifiex_terminate_workqueue(adapter); | |
| err_kmalloc: | |
| mwifiex_free_adapter(adapter); | |
| err_init_sw: | |
| up(sem); | |
| exit_sem_err: | |
| return -1; | |
| } | |
| EXPORT_SYMBOL_GPL(mwifiex_add_card); | |
| /* | |
| * This function removes the card. | |
| * | |
| * This function follows the following major steps to remove the device - | |
| * - Stop data traffic | |
| * - Shutdown firmware | |
| * - Remove the logical interfaces | |
| * - Terminate the work queue | |
| * - Unregister the device | |
| * - Free the adapter structure | |
| */ | |
| int mwifiex_remove_card(struct mwifiex_adapter *adapter, struct semaphore *sem) | |
| { | |
| struct mwifiex_private *priv = NULL; | |
| int i; | |
| if (down_trylock(sem)) | |
| goto exit_sem_err; | |
| if (!adapter) | |
| goto exit_remove; | |
| /* We can no longer handle interrupts once we start doing the teardown | |
| * below. */ | |
| if (adapter->if_ops.disable_int) | |
| adapter->if_ops.disable_int(adapter); | |
| adapter->surprise_removed = true; | |
| mwifiex_terminate_workqueue(adapter); | |
| /* Stop data */ | |
| for (i = 0; i < adapter->priv_num; i++) { | |
| priv = adapter->priv[i]; | |
| if (priv && priv->netdev) { | |
| mwifiex_stop_net_dev_queue(priv->netdev, adapter); | |
| if (netif_carrier_ok(priv->netdev)) | |
| netif_carrier_off(priv->netdev); | |
| } | |
| } | |
| mwifiex_dbg(adapter, CMD, | |
| "cmd: calling mwifiex_shutdown_drv...\n"); | |
| adapter->init_wait_q_woken = false; | |
| if (mwifiex_shutdown_drv(adapter) == -EINPROGRESS) | |
| wait_event_interruptible(adapter->init_wait_q, | |
| adapter->init_wait_q_woken); | |
| mwifiex_dbg(adapter, CMD, | |
| "cmd: mwifiex_shutdown_drv done\n"); | |
| if (atomic_read(&adapter->rx_pending) || | |
| atomic_read(&adapter->tx_pending) || | |
| atomic_read(&adapter->cmd_pending)) { | |
| mwifiex_dbg(adapter, ERROR, | |
| "rx_pending=%d, tx_pending=%d,\t" | |
| "cmd_pending=%d\n", | |
| atomic_read(&adapter->rx_pending), | |
| atomic_read(&adapter->tx_pending), | |
| atomic_read(&adapter->cmd_pending)); | |
| } | |
| for (i = 0; i < adapter->priv_num; i++) { | |
| priv = adapter->priv[i]; | |
| if (!priv) | |
| continue; | |
| rtnl_lock(); | |
| if (priv->netdev && | |
| priv->wdev.iftype != NL80211_IFTYPE_UNSPECIFIED) | |
| mwifiex_del_virtual_intf(adapter->wiphy, &priv->wdev); | |
| rtnl_unlock(); | |
| } | |
| wiphy_unregister(adapter->wiphy); | |
| wiphy_free(adapter->wiphy); | |
| /* Unregister device */ | |
| mwifiex_dbg(adapter, INFO, | |
| "info: unregister device\n"); | |
| if (adapter->if_ops.unregister_dev) | |
| adapter->if_ops.unregister_dev(adapter); | |
| /* Free adapter structure */ | |
| mwifiex_dbg(adapter, INFO, | |
| "info: free adapter\n"); | |
| mwifiex_free_adapter(adapter); | |
| exit_remove: | |
| up(sem); | |
| exit_sem_err: | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(mwifiex_remove_card); | |
| void _mwifiex_dbg(const struct mwifiex_adapter *adapter, int mask, | |
| const char *fmt, ...) | |
| { | |
| struct va_format vaf; | |
| va_list args; | |
| if (!adapter->dev || !(adapter->debug_mask & mask)) | |
| return; | |
| va_start(args, fmt); | |
| vaf.fmt = fmt; | |
| vaf.va = &args; | |
| dev_info(adapter->dev, "%pV", &vaf); | |
| va_end(args); | |
| } | |
| EXPORT_SYMBOL_GPL(_mwifiex_dbg); | |
| /* | |
| * This function initializes the module. | |
| * | |
| * The debug FS is also initialized if configured. | |
| */ | |
| static int | |
| mwifiex_init_module(void) | |
| { | |
| #ifdef CONFIG_DEBUG_FS | |
| mwifiex_debugfs_init(); | |
| #endif | |
| return 0; | |
| } | |
| /* | |
| * This function cleans up the module. | |
| * | |
| * The debug FS is removed if available. | |
| */ | |
| static void | |
| mwifiex_cleanup_module(void) | |
| { | |
| #ifdef CONFIG_DEBUG_FS | |
| mwifiex_debugfs_remove(); | |
| #endif | |
| } | |
| module_init(mwifiex_init_module); | |
| module_exit(mwifiex_cleanup_module); | |
| MODULE_AUTHOR("Marvell International Ltd."); | |
| MODULE_DESCRIPTION("Marvell WiFi-Ex Driver version " VERSION); | |
| MODULE_VERSION(VERSION); | |
| MODULE_LICENSE("GPL v2"); |