| /* | |
| * This file is part of wl1251 | |
| * | |
| * Copyright (C) 2008-2009 Nokia Corporation | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * version 2 as published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | |
| * 02110-1301 USA | |
| * | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/firmware.h> | |
| #include <linux/delay.h> | |
| #include <linux/irq.h> | |
| #include <linux/crc32.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/vmalloc.h> | |
| #include <linux/slab.h> | |
| #include <linux/netdevice.h> | |
| #include "wl1251.h" | |
| #include "wl12xx_80211.h" | |
| #include "reg.h" | |
| #include "io.h" | |
| #include "cmd.h" | |
| #include "event.h" | |
| #include "tx.h" | |
| #include "rx.h" | |
| #include "ps.h" | |
| #include "init.h" | |
| #include "debugfs.h" | |
| #include "boot.h" | |
| void wl1251_enable_interrupts(struct wl1251 *wl) | |
| { | |
| wl->if_ops->enable_irq(wl); | |
| } | |
| void wl1251_disable_interrupts(struct wl1251 *wl) | |
| { | |
| wl->if_ops->disable_irq(wl); | |
| } | |
| static int wl1251_power_off(struct wl1251 *wl) | |
| { | |
| return wl->if_ops->power(wl, false); | |
| } | |
| static int wl1251_power_on(struct wl1251 *wl) | |
| { | |
| return wl->if_ops->power(wl, true); | |
| } | |
| static int wl1251_fetch_firmware(struct wl1251 *wl) | |
| { | |
| const struct firmware *fw; | |
| struct device *dev = wiphy_dev(wl->hw->wiphy); | |
| int ret; | |
| ret = request_firmware(&fw, WL1251_FW_NAME, dev); | |
| if (ret < 0) { | |
| wl1251_error("could not get firmware: %d", ret); | |
| return ret; | |
| } | |
| if (fw->size % 4) { | |
| wl1251_error("firmware size is not multiple of 32 bits: %zu", | |
| fw->size); | |
| ret = -EILSEQ; | |
| goto out; | |
| } | |
| wl->fw_len = fw->size; | |
| wl->fw = vmalloc(wl->fw_len); | |
| if (!wl->fw) { | |
| wl1251_error("could not allocate memory for the firmware"); | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| memcpy(wl->fw, fw->data, wl->fw_len); | |
| ret = 0; | |
| out: | |
| release_firmware(fw); | |
| return ret; | |
| } | |
| static int wl1251_fetch_nvs(struct wl1251 *wl) | |
| { | |
| const struct firmware *fw; | |
| struct device *dev = wiphy_dev(wl->hw->wiphy); | |
| int ret; | |
| ret = request_firmware(&fw, WL1251_NVS_NAME, dev); | |
| if (ret < 0) { | |
| wl1251_error("could not get nvs file: %d", ret); | |
| return ret; | |
| } | |
| if (fw->size % 4) { | |
| wl1251_error("nvs size is not multiple of 32 bits: %zu", | |
| fw->size); | |
| ret = -EILSEQ; | |
| goto out; | |
| } | |
| wl->nvs_len = fw->size; | |
| wl->nvs = kmemdup(fw->data, wl->nvs_len, GFP_KERNEL); | |
| if (!wl->nvs) { | |
| wl1251_error("could not allocate memory for the nvs file"); | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| ret = 0; | |
| out: | |
| release_firmware(fw); | |
| return ret; | |
| } | |
| static void wl1251_fw_wakeup(struct wl1251 *wl) | |
| { | |
| u32 elp_reg; | |
| elp_reg = ELPCTRL_WAKE_UP; | |
| wl1251_write_elp(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg); | |
| elp_reg = wl1251_read_elp(wl, HW_ACCESS_ELP_CTRL_REG_ADDR); | |
| if (!(elp_reg & ELPCTRL_WLAN_READY)) | |
| wl1251_warning("WLAN not ready"); | |
| } | |
| static int wl1251_chip_wakeup(struct wl1251 *wl) | |
| { | |
| int ret; | |
| ret = wl1251_power_on(wl); | |
| if (ret < 0) | |
| return ret; | |
| msleep(WL1251_POWER_ON_SLEEP); | |
| wl->if_ops->reset(wl); | |
| /* We don't need a real memory partition here, because we only want | |
| * to use the registers at this point. */ | |
| wl1251_set_partition(wl, | |
| 0x00000000, | |
| 0x00000000, | |
| REGISTERS_BASE, | |
| REGISTERS_DOWN_SIZE); | |
| /* ELP module wake up */ | |
| wl1251_fw_wakeup(wl); | |
| /* whal_FwCtrl_BootSm() */ | |
| /* 0. read chip id from CHIP_ID */ | |
| wl->chip_id = wl1251_reg_read32(wl, CHIP_ID_B); | |
| /* 1. check if chip id is valid */ | |
| switch (wl->chip_id) { | |
| case CHIP_ID_1251_PG12: | |
| wl1251_debug(DEBUG_BOOT, "chip id 0x%x (1251 PG12)", | |
| wl->chip_id); | |
| break; | |
| case CHIP_ID_1251_PG11: | |
| wl1251_debug(DEBUG_BOOT, "chip id 0x%x (1251 PG11)", | |
| wl->chip_id); | |
| break; | |
| case CHIP_ID_1251_PG10: | |
| default: | |
| wl1251_error("unsupported chip id: 0x%x", wl->chip_id); | |
| ret = -ENODEV; | |
| goto out; | |
| } | |
| if (wl->fw == NULL) { | |
| ret = wl1251_fetch_firmware(wl); | |
| if (ret < 0) | |
| goto out; | |
| } | |
| if (wl->nvs == NULL && !wl->use_eeprom) { | |
| /* No NVS from netlink, try to get it from the filesystem */ | |
| ret = wl1251_fetch_nvs(wl); | |
| if (ret < 0) | |
| goto out; | |
| } | |
| out: | |
| return ret; | |
| } | |
| #define WL1251_IRQ_LOOP_COUNT 10 | |
| static void wl1251_irq_work(struct work_struct *work) | |
| { | |
| u32 intr, ctr = WL1251_IRQ_LOOP_COUNT; | |
| struct wl1251 *wl = | |
| container_of(work, struct wl1251, irq_work); | |
| int ret; | |
| mutex_lock(&wl->mutex); | |
| wl1251_debug(DEBUG_IRQ, "IRQ work"); | |
| if (wl->state == WL1251_STATE_OFF) | |
| goto out; | |
| ret = wl1251_ps_elp_wakeup(wl); | |
| if (ret < 0) | |
| goto out; | |
| wl1251_reg_write32(wl, ACX_REG_INTERRUPT_MASK, WL1251_ACX_INTR_ALL); | |
| intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR); | |
| wl1251_debug(DEBUG_IRQ, "intr: 0x%x", intr); | |
| do { | |
| if (wl->data_path) { | |
| wl->rx_counter = wl1251_mem_read32( | |
| wl, wl->data_path->rx_control_addr); | |
| /* We handle a frmware bug here */ | |
| switch ((wl->rx_counter - wl->rx_handled) & 0xf) { | |
| case 0: | |
| wl1251_debug(DEBUG_IRQ, | |
| "RX: FW and host in sync"); | |
| intr &= ~WL1251_ACX_INTR_RX0_DATA; | |
| intr &= ~WL1251_ACX_INTR_RX1_DATA; | |
| break; | |
| case 1: | |
| wl1251_debug(DEBUG_IRQ, "RX: FW +1"); | |
| intr |= WL1251_ACX_INTR_RX0_DATA; | |
| intr &= ~WL1251_ACX_INTR_RX1_DATA; | |
| break; | |
| case 2: | |
| wl1251_debug(DEBUG_IRQ, "RX: FW +2"); | |
| intr |= WL1251_ACX_INTR_RX0_DATA; | |
| intr |= WL1251_ACX_INTR_RX1_DATA; | |
| break; | |
| default: | |
| wl1251_warning( | |
| "RX: FW and host out of sync: %d", | |
| wl->rx_counter - wl->rx_handled); | |
| break; | |
| } | |
| wl->rx_handled = wl->rx_counter; | |
| wl1251_debug(DEBUG_IRQ, "RX counter: %d", | |
| wl->rx_counter); | |
| } | |
| intr &= wl->intr_mask; | |
| if (intr == 0) { | |
| wl1251_debug(DEBUG_IRQ, "INTR is 0"); | |
| goto out_sleep; | |
| } | |
| if (intr & WL1251_ACX_INTR_RX0_DATA) { | |
| wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX0_DATA"); | |
| wl1251_rx(wl); | |
| } | |
| if (intr & WL1251_ACX_INTR_RX1_DATA) { | |
| wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX1_DATA"); | |
| wl1251_rx(wl); | |
| } | |
| if (intr & WL1251_ACX_INTR_TX_RESULT) { | |
| wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_TX_RESULT"); | |
| wl1251_tx_complete(wl); | |
| } | |
| if (intr & WL1251_ACX_INTR_EVENT_A) { | |
| wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_EVENT_A"); | |
| wl1251_event_handle(wl, 0); | |
| } | |
| if (intr & WL1251_ACX_INTR_EVENT_B) { | |
| wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_EVENT_B"); | |
| wl1251_event_handle(wl, 1); | |
| } | |
| if (intr & WL1251_ACX_INTR_INIT_COMPLETE) | |
| wl1251_debug(DEBUG_IRQ, | |
| "WL1251_ACX_INTR_INIT_COMPLETE"); | |
| if (--ctr == 0) | |
| break; | |
| intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR); | |
| } while (intr); | |
| out_sleep: | |
| wl1251_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask)); | |
| wl1251_ps_elp_sleep(wl); | |
| out: | |
| mutex_unlock(&wl->mutex); | |
| } | |
| static int wl1251_join(struct wl1251 *wl, u8 bss_type, u8 channel, | |
| u16 beacon_interval, u8 dtim_period) | |
| { | |
| int ret; | |
| ret = wl1251_acx_frame_rates(wl, DEFAULT_HW_GEN_TX_RATE, | |
| DEFAULT_HW_GEN_MODULATION_TYPE, | |
| wl->tx_mgmt_frm_rate, | |
| wl->tx_mgmt_frm_mod); | |
| if (ret < 0) | |
| goto out; | |
| /* | |
| * Join command applies filters, and if we are not associated, | |
| * BSSID filter must be disabled for association to work. | |
| */ | |
| if (is_zero_ether_addr(wl->bssid)) | |
| wl->rx_config &= ~CFG_BSSID_FILTER_EN; | |
| ret = wl1251_cmd_join(wl, bss_type, channel, beacon_interval, | |
| dtim_period); | |
| if (ret < 0) | |
| goto out; | |
| ret = wl1251_event_wait(wl, JOIN_EVENT_COMPLETE_ID, 100); | |
| if (ret < 0) | |
| wl1251_warning("join timeout"); | |
| out: | |
| return ret; | |
| } | |
| static void wl1251_op_tx(struct ieee80211_hw *hw, | |
| struct ieee80211_tx_control *control, | |
| struct sk_buff *skb) | |
| { | |
| struct wl1251 *wl = hw->priv; | |
| unsigned long flags; | |
| skb_queue_tail(&wl->tx_queue, skb); | |
| /* | |
| * The chip specific setup must run before the first TX packet - | |
| * before that, the tx_work will not be initialized! | |
| */ | |
| ieee80211_queue_work(wl->hw, &wl->tx_work); | |
| /* | |
| * The workqueue is slow to process the tx_queue and we need stop | |
| * the queue here, otherwise the queue will get too long. | |
| */ | |
| if (skb_queue_len(&wl->tx_queue) >= WL1251_TX_QUEUE_HIGH_WATERMARK) { | |
| wl1251_debug(DEBUG_TX, "op_tx: tx_queue full, stop queues"); | |
| spin_lock_irqsave(&wl->wl_lock, flags); | |
| ieee80211_stop_queues(wl->hw); | |
| wl->tx_queue_stopped = true; | |
| spin_unlock_irqrestore(&wl->wl_lock, flags); | |
| } | |
| } | |
| static int wl1251_op_start(struct ieee80211_hw *hw) | |
| { | |
| struct wl1251 *wl = hw->priv; | |
| struct wiphy *wiphy = hw->wiphy; | |
| int ret = 0; | |
| wl1251_debug(DEBUG_MAC80211, "mac80211 start"); | |
| mutex_lock(&wl->mutex); | |
| if (wl->state != WL1251_STATE_OFF) { | |
| wl1251_error("cannot start because not in off state: %d", | |
| wl->state); | |
| ret = -EBUSY; | |
| goto out; | |
| } | |
| ret = wl1251_chip_wakeup(wl); | |
| if (ret < 0) | |
| goto out; | |
| ret = wl1251_boot(wl); | |
| if (ret < 0) | |
| goto out; | |
| ret = wl1251_hw_init(wl); | |
| if (ret < 0) | |
| goto out; | |
| ret = wl1251_acx_station_id(wl); | |
| if (ret < 0) | |
| goto out; | |
| wl->state = WL1251_STATE_ON; | |
| wl1251_info("firmware booted (%s)", wl->fw_ver); | |
| /* update hw/fw version info in wiphy struct */ | |
| wiphy->hw_version = wl->chip_id; | |
| strncpy(wiphy->fw_version, wl->fw_ver, sizeof(wiphy->fw_version)); | |
| out: | |
| if (ret < 0) | |
| wl1251_power_off(wl); | |
| mutex_unlock(&wl->mutex); | |
| return ret; | |
| } | |
| static void wl1251_op_stop(struct ieee80211_hw *hw) | |
| { | |
| struct wl1251 *wl = hw->priv; | |
| wl1251_info("down"); | |
| wl1251_debug(DEBUG_MAC80211, "mac80211 stop"); | |
| mutex_lock(&wl->mutex); | |
| WARN_ON(wl->state != WL1251_STATE_ON); | |
| if (wl->scanning) { | |
| struct cfg80211_scan_info info = { | |
| .aborted = true, | |
| }; | |
| ieee80211_scan_completed(wl->hw, &info); | |
| wl->scanning = false; | |
| } | |
| wl->state = WL1251_STATE_OFF; | |
| wl1251_disable_interrupts(wl); | |
| mutex_unlock(&wl->mutex); | |
| cancel_work_sync(&wl->irq_work); | |
| cancel_work_sync(&wl->tx_work); | |
| cancel_delayed_work_sync(&wl->elp_work); | |
| mutex_lock(&wl->mutex); | |
| /* let's notify MAC80211 about the remaining pending TX frames */ | |
| wl1251_tx_flush(wl); | |
| wl1251_power_off(wl); | |
| eth_zero_addr(wl->bssid); | |
| wl->listen_int = 1; | |
| wl->bss_type = MAX_BSS_TYPE; | |
| wl->data_in_count = 0; | |
| wl->rx_counter = 0; | |
| wl->rx_handled = 0; | |
| wl->rx_current_buffer = 0; | |
| wl->rx_last_id = 0; | |
| wl->next_tx_complete = 0; | |
| wl->elp = false; | |
| wl->station_mode = STATION_ACTIVE_MODE; | |
| wl->psm_entry_retry = 0; | |
| wl->tx_queue_stopped = false; | |
| wl->power_level = WL1251_DEFAULT_POWER_LEVEL; | |
| wl->rssi_thold = 0; | |
| wl->channel = WL1251_DEFAULT_CHANNEL; | |
| wl->monitor_present = false; | |
| wl->joined = false; | |
| wl1251_debugfs_reset(wl); | |
| mutex_unlock(&wl->mutex); | |
| } | |
| static int wl1251_op_add_interface(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif) | |
| { | |
| struct wl1251 *wl = hw->priv; | |
| int ret = 0; | |
| vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER | | |
| IEEE80211_VIF_SUPPORTS_UAPSD | | |
| IEEE80211_VIF_SUPPORTS_CQM_RSSI; | |
| wl1251_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %pM", | |
| vif->type, vif->addr); | |
| mutex_lock(&wl->mutex); | |
| if (wl->vif) { | |
| ret = -EBUSY; | |
| goto out; | |
| } | |
| wl->vif = vif; | |
| switch (vif->type) { | |
| case NL80211_IFTYPE_STATION: | |
| wl->bss_type = BSS_TYPE_STA_BSS; | |
| break; | |
| case NL80211_IFTYPE_ADHOC: | |
| wl->bss_type = BSS_TYPE_IBSS; | |
| break; | |
| default: | |
| ret = -EOPNOTSUPP; | |
| goto out; | |
| } | |
| if (!ether_addr_equal_unaligned(wl->mac_addr, vif->addr)) { | |
| memcpy(wl->mac_addr, vif->addr, ETH_ALEN); | |
| SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr); | |
| ret = wl1251_acx_station_id(wl); | |
| if (ret < 0) | |
| goto out; | |
| } | |
| out: | |
| mutex_unlock(&wl->mutex); | |
| return ret; | |
| } | |
| static void wl1251_op_remove_interface(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif) | |
| { | |
| struct wl1251 *wl = hw->priv; | |
| mutex_lock(&wl->mutex); | |
| wl1251_debug(DEBUG_MAC80211, "mac80211 remove interface"); | |
| wl->vif = NULL; | |
| eth_zero_addr(wl->bssid); | |
| mutex_unlock(&wl->mutex); | |
| } | |
| static int wl1251_build_null_data(struct wl1251 *wl) | |
| { | |
| struct sk_buff *skb = NULL; | |
| int size; | |
| void *ptr; | |
| int ret = -ENOMEM; | |
| if (wl->bss_type == BSS_TYPE_IBSS) { | |
| size = sizeof(struct wl12xx_null_data_template); | |
| ptr = NULL; | |
| } else { | |
| skb = ieee80211_nullfunc_get(wl->hw, wl->vif); | |
| if (!skb) | |
| goto out; | |
| size = skb->len; | |
| ptr = skb->data; | |
| } | |
| ret = wl1251_cmd_template_set(wl, CMD_NULL_DATA, ptr, size); | |
| out: | |
| dev_kfree_skb(skb); | |
| if (ret) | |
| wl1251_warning("cmd buld null data failed: %d", ret); | |
| return ret; | |
| } | |
| static int wl1251_build_qos_null_data(struct wl1251 *wl) | |
| { | |
| struct ieee80211_qos_hdr template; | |
| memset(&template, 0, sizeof(template)); | |
| memcpy(template.addr1, wl->bssid, ETH_ALEN); | |
| memcpy(template.addr2, wl->mac_addr, ETH_ALEN); | |
| memcpy(template.addr3, wl->bssid, ETH_ALEN); | |
| template.frame_control = cpu_to_le16(IEEE80211_FTYPE_DATA | | |
| IEEE80211_STYPE_QOS_NULLFUNC | | |
| IEEE80211_FCTL_TODS); | |
| /* FIXME: not sure what priority to use here */ | |
| template.qos_ctrl = cpu_to_le16(0); | |
| return wl1251_cmd_template_set(wl, CMD_QOS_NULL_DATA, &template, | |
| sizeof(template)); | |
| } | |
| static bool wl1251_can_do_pm(struct ieee80211_conf *conf, struct wl1251 *wl) | |
| { | |
| return (conf->flags & IEEE80211_CONF_PS) && !wl->monitor_present; | |
| } | |
| static int wl1251_op_config(struct ieee80211_hw *hw, u32 changed) | |
| { | |
| struct wl1251 *wl = hw->priv; | |
| struct ieee80211_conf *conf = &hw->conf; | |
| int channel, ret = 0; | |
| channel = ieee80211_frequency_to_channel( | |
| conf->chandef.chan->center_freq); | |
| wl1251_debug(DEBUG_MAC80211, | |
| "mac80211 config ch %d monitor %s psm %s power %d", | |
| channel, | |
| conf->flags & IEEE80211_CONF_MONITOR ? "on" : "off", | |
| conf->flags & IEEE80211_CONF_PS ? "on" : "off", | |
| conf->power_level); | |
| mutex_lock(&wl->mutex); | |
| ret = wl1251_ps_elp_wakeup(wl); | |
| if (ret < 0) | |
| goto out; | |
| if (changed & IEEE80211_CONF_CHANGE_MONITOR) { | |
| u32 mode; | |
| if (conf->flags & IEEE80211_CONF_MONITOR) { | |
| wl->monitor_present = true; | |
| mode = DF_SNIFF_MODE_ENABLE | DF_ENCRYPTION_DISABLE; | |
| } else { | |
| wl->monitor_present = false; | |
| mode = 0; | |
| } | |
| ret = wl1251_acx_feature_cfg(wl, mode); | |
| if (ret < 0) | |
| goto out_sleep; | |
| } | |
| if (channel != wl->channel) { | |
| wl->channel = channel; | |
| /* | |
| * Use ENABLE_RX command for channel switching when no | |
| * interface is present (monitor mode only). | |
| * This leaves the tx path disabled in firmware, whereas | |
| * the usual JOIN command seems to transmit some frames | |
| * at firmware level. | |
| */ | |
| if (wl->vif == NULL) { | |
| wl->joined = false; | |
| ret = wl1251_cmd_data_path_rx(wl, wl->channel, 1); | |
| } else { | |
| ret = wl1251_join(wl, wl->bss_type, wl->channel, | |
| wl->beacon_int, wl->dtim_period); | |
| } | |
| if (ret < 0) | |
| goto out_sleep; | |
| } | |
| if (wl1251_can_do_pm(conf, wl) && !wl->psm_requested) { | |
| wl1251_debug(DEBUG_PSM, "psm enabled"); | |
| wl->psm_requested = true; | |
| wl->dtim_period = conf->ps_dtim_period; | |
| ret = wl1251_acx_wr_tbtt_and_dtim(wl, wl->beacon_int, | |
| wl->dtim_period); | |
| /* | |
| * mac80211 enables PSM only if we're already associated. | |
| */ | |
| ret = wl1251_ps_set_mode(wl, STATION_POWER_SAVE_MODE); | |
| if (ret < 0) | |
| goto out_sleep; | |
| } else if (!wl1251_can_do_pm(conf, wl) && wl->psm_requested) { | |
| wl1251_debug(DEBUG_PSM, "psm disabled"); | |
| wl->psm_requested = false; | |
| if (wl->station_mode != STATION_ACTIVE_MODE) { | |
| ret = wl1251_ps_set_mode(wl, STATION_ACTIVE_MODE); | |
| if (ret < 0) | |
| goto out_sleep; | |
| } | |
| } | |
| if (changed & IEEE80211_CONF_CHANGE_IDLE && !wl->scanning) { | |
| if (conf->flags & IEEE80211_CONF_IDLE) { | |
| ret = wl1251_ps_set_mode(wl, STATION_IDLE); | |
| if (ret < 0) | |
| goto out_sleep; | |
| } else { | |
| ret = wl1251_ps_set_mode(wl, STATION_ACTIVE_MODE); | |
| if (ret < 0) | |
| goto out_sleep; | |
| ret = wl1251_join(wl, wl->bss_type, wl->channel, | |
| wl->beacon_int, wl->dtim_period); | |
| if (ret < 0) | |
| goto out_sleep; | |
| } | |
| } | |
| if (conf->power_level != wl->power_level) { | |
| ret = wl1251_acx_tx_power(wl, conf->power_level); | |
| if (ret < 0) | |
| goto out_sleep; | |
| wl->power_level = conf->power_level; | |
| } | |
| out_sleep: | |
| wl1251_ps_elp_sleep(wl); | |
| out: | |
| mutex_unlock(&wl->mutex); | |
| return ret; | |
| } | |
| struct wl1251_filter_params { | |
| bool enabled; | |
| int mc_list_length; | |
| u8 mc_list[ACX_MC_ADDRESS_GROUP_MAX][ETH_ALEN]; | |
| }; | |
| static u64 wl1251_op_prepare_multicast(struct ieee80211_hw *hw, | |
| struct netdev_hw_addr_list *mc_list) | |
| { | |
| struct wl1251_filter_params *fp; | |
| struct netdev_hw_addr *ha; | |
| struct wl1251 *wl = hw->priv; | |
| if (unlikely(wl->state == WL1251_STATE_OFF)) | |
| return 0; | |
| fp = kzalloc(sizeof(*fp), GFP_ATOMIC); | |
| if (!fp) { | |
| wl1251_error("Out of memory setting filters."); | |
| return 0; | |
| } | |
| /* update multicast filtering parameters */ | |
| fp->mc_list_length = 0; | |
| if (netdev_hw_addr_list_count(mc_list) > ACX_MC_ADDRESS_GROUP_MAX) { | |
| fp->enabled = false; | |
| } else { | |
| fp->enabled = true; | |
| netdev_hw_addr_list_for_each(ha, mc_list) { | |
| memcpy(fp->mc_list[fp->mc_list_length], | |
| ha->addr, ETH_ALEN); | |
| fp->mc_list_length++; | |
| } | |
| } | |
| return (u64)(unsigned long)fp; | |
| } | |
| #define WL1251_SUPPORTED_FILTERS (FIF_ALLMULTI | \ | |
| FIF_FCSFAIL | \ | |
| FIF_BCN_PRBRESP_PROMISC | \ | |
| FIF_CONTROL | \ | |
| FIF_OTHER_BSS | \ | |
| FIF_PROBE_REQ) | |
| static void wl1251_op_configure_filter(struct ieee80211_hw *hw, | |
| unsigned int changed, | |
| unsigned int *total, u64 multicast) | |
| { | |
| struct wl1251_filter_params *fp = (void *)(unsigned long)multicast; | |
| struct wl1251 *wl = hw->priv; | |
| int ret; | |
| wl1251_debug(DEBUG_MAC80211, "mac80211 configure filter"); | |
| *total &= WL1251_SUPPORTED_FILTERS; | |
| changed &= WL1251_SUPPORTED_FILTERS; | |
| if (changed == 0) { | |
| /* no filters which we support changed */ | |
| kfree(fp); | |
| return; | |
| } | |
| mutex_lock(&wl->mutex); | |
| wl->rx_config = WL1251_DEFAULT_RX_CONFIG; | |
| wl->rx_filter = WL1251_DEFAULT_RX_FILTER; | |
| if (*total & FIF_ALLMULTI) | |
| /* | |
| * CFG_MC_FILTER_EN in rx_config needs to be 0 to receive | |
| * all multicast frames | |
| */ | |
| wl->rx_config &= ~CFG_MC_FILTER_EN; | |
| if (*total & FIF_FCSFAIL) | |
| wl->rx_filter |= CFG_RX_FCS_ERROR; | |
| if (*total & FIF_BCN_PRBRESP_PROMISC) { | |
| wl->rx_config &= ~CFG_BSSID_FILTER_EN; | |
| wl->rx_config &= ~CFG_SSID_FILTER_EN; | |
| } | |
| if (*total & FIF_CONTROL) | |
| wl->rx_filter |= CFG_RX_CTL_EN; | |
| if (*total & FIF_OTHER_BSS || is_zero_ether_addr(wl->bssid)) | |
| wl->rx_config &= ~CFG_BSSID_FILTER_EN; | |
| if (*total & FIF_PROBE_REQ) | |
| wl->rx_filter |= CFG_RX_PREQ_EN; | |
| if (wl->state == WL1251_STATE_OFF) | |
| goto out; | |
| ret = wl1251_ps_elp_wakeup(wl); | |
| if (ret < 0) | |
| goto out; | |
| if (*total & FIF_ALLMULTI) | |
| ret = wl1251_acx_group_address_tbl(wl, false, NULL, 0); | |
| else if (fp) | |
| ret = wl1251_acx_group_address_tbl(wl, fp->enabled, | |
| fp->mc_list, | |
| fp->mc_list_length); | |
| if (ret < 0) | |
| goto out; | |
| /* send filters to firmware */ | |
| wl1251_acx_rx_config(wl, wl->rx_config, wl->rx_filter); | |
| wl1251_ps_elp_sleep(wl); | |
| out: | |
| mutex_unlock(&wl->mutex); | |
| kfree(fp); | |
| } | |
| /* HW encryption */ | |
| static int wl1251_set_key_type(struct wl1251 *wl, | |
| struct wl1251_cmd_set_keys *key, | |
| enum set_key_cmd cmd, | |
| struct ieee80211_key_conf *mac80211_key, | |
| const u8 *addr) | |
| { | |
| switch (mac80211_key->cipher) { | |
| case WLAN_CIPHER_SUITE_WEP40: | |
| case WLAN_CIPHER_SUITE_WEP104: | |
| if (is_broadcast_ether_addr(addr)) | |
| key->key_type = KEY_WEP_DEFAULT; | |
| else | |
| key->key_type = KEY_WEP_ADDR; | |
| mac80211_key->hw_key_idx = mac80211_key->keyidx; | |
| break; | |
| case WLAN_CIPHER_SUITE_TKIP: | |
| if (is_broadcast_ether_addr(addr)) | |
| key->key_type = KEY_TKIP_MIC_GROUP; | |
| else | |
| key->key_type = KEY_TKIP_MIC_PAIRWISE; | |
| mac80211_key->hw_key_idx = mac80211_key->keyidx; | |
| break; | |
| case WLAN_CIPHER_SUITE_CCMP: | |
| if (is_broadcast_ether_addr(addr)) | |
| key->key_type = KEY_AES_GROUP; | |
| else | |
| key->key_type = KEY_AES_PAIRWISE; | |
| mac80211_key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; | |
| break; | |
| default: | |
| wl1251_error("Unknown key cipher 0x%x", mac80211_key->cipher); | |
| return -EOPNOTSUPP; | |
| } | |
| return 0; | |
| } | |
| static int wl1251_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, | |
| struct ieee80211_vif *vif, | |
| struct ieee80211_sta *sta, | |
| struct ieee80211_key_conf *key) | |
| { | |
| struct wl1251 *wl = hw->priv; | |
| struct wl1251_cmd_set_keys *wl_cmd; | |
| const u8 *addr; | |
| int ret; | |
| static const u8 bcast_addr[ETH_ALEN] = | |
| { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; | |
| wl1251_debug(DEBUG_MAC80211, "mac80211 set key"); | |
| wl_cmd = kzalloc(sizeof(*wl_cmd), GFP_KERNEL); | |
| if (!wl_cmd) { | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| addr = sta ? sta->addr : bcast_addr; | |
| wl1251_debug(DEBUG_CRYPT, "CMD: 0x%x", cmd); | |
| wl1251_dump(DEBUG_CRYPT, "ADDR: ", addr, ETH_ALEN); | |
| wl1251_debug(DEBUG_CRYPT, "Key: algo:0x%x, id:%d, len:%d flags 0x%x", | |
| key->cipher, key->keyidx, key->keylen, key->flags); | |
| wl1251_dump(DEBUG_CRYPT, "KEY: ", key->key, key->keylen); | |
| if (is_zero_ether_addr(addr)) { | |
| /* We dont support TX only encryption */ | |
| ret = -EOPNOTSUPP; | |
| goto out; | |
| } | |
| mutex_lock(&wl->mutex); | |
| switch (cmd) { | |
| case SET_KEY: | |
| if (wl->monitor_present) { | |
| ret = -EOPNOTSUPP; | |
| goto out_unlock; | |
| } | |
| wl_cmd->key_action = KEY_ADD_OR_REPLACE; | |
| break; | |
| case DISABLE_KEY: | |
| wl_cmd->key_action = KEY_REMOVE; | |
| break; | |
| default: | |
| wl1251_error("Unsupported key cmd 0x%x", cmd); | |
| break; | |
| } | |
| ret = wl1251_ps_elp_wakeup(wl); | |
| if (ret < 0) | |
| goto out_unlock; | |
| ret = wl1251_set_key_type(wl, wl_cmd, cmd, key, addr); | |
| if (ret < 0) { | |
| wl1251_error("Set KEY type failed"); | |
| goto out_sleep; | |
| } | |
| if (wl_cmd->key_type != KEY_WEP_DEFAULT) | |
| memcpy(wl_cmd->addr, addr, ETH_ALEN); | |
| if ((wl_cmd->key_type == KEY_TKIP_MIC_GROUP) || | |
| (wl_cmd->key_type == KEY_TKIP_MIC_PAIRWISE)) { | |
| /* | |
| * We get the key in the following form: | |
| * TKIP (16 bytes) - TX MIC (8 bytes) - RX MIC (8 bytes) | |
| * but the target is expecting: | |
| * TKIP - RX MIC - TX MIC | |
| */ | |
| memcpy(wl_cmd->key, key->key, 16); | |
| memcpy(wl_cmd->key + 16, key->key + 24, 8); | |
| memcpy(wl_cmd->key + 24, key->key + 16, 8); | |
| } else { | |
| memcpy(wl_cmd->key, key->key, key->keylen); | |
| } | |
| wl_cmd->key_size = key->keylen; | |
| wl_cmd->id = key->keyidx; | |
| wl_cmd->ssid_profile = 0; | |
| wl1251_dump(DEBUG_CRYPT, "TARGET KEY: ", wl_cmd, sizeof(*wl_cmd)); | |
| ret = wl1251_cmd_send(wl, CMD_SET_KEYS, wl_cmd, sizeof(*wl_cmd)); | |
| if (ret < 0) { | |
| wl1251_warning("could not set keys"); | |
| goto out_sleep; | |
| } | |
| out_sleep: | |
| wl1251_ps_elp_sleep(wl); | |
| out_unlock: | |
| mutex_unlock(&wl->mutex); | |
| out: | |
| kfree(wl_cmd); | |
| return ret; | |
| } | |
| static int wl1251_op_hw_scan(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif, | |
| struct ieee80211_scan_request *hw_req) | |
| { | |
| struct cfg80211_scan_request *req = &hw_req->req; | |
| struct wl1251 *wl = hw->priv; | |
| struct sk_buff *skb; | |
| size_t ssid_len = 0; | |
| u8 *ssid = NULL; | |
| int ret; | |
| wl1251_debug(DEBUG_MAC80211, "mac80211 hw scan"); | |
| if (req->n_ssids) { | |
| ssid = req->ssids[0].ssid; | |
| ssid_len = req->ssids[0].ssid_len; | |
| } | |
| mutex_lock(&wl->mutex); | |
| if (wl->scanning) { | |
| wl1251_debug(DEBUG_SCAN, "scan already in progress"); | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| ret = wl1251_ps_elp_wakeup(wl); | |
| if (ret < 0) | |
| goto out; | |
| if (hw->conf.flags & IEEE80211_CONF_IDLE) { | |
| ret = wl1251_ps_set_mode(wl, STATION_ACTIVE_MODE); | |
| if (ret < 0) | |
| goto out_sleep; | |
| ret = wl1251_join(wl, wl->bss_type, wl->channel, | |
| wl->beacon_int, wl->dtim_period); | |
| if (ret < 0) | |
| goto out_sleep; | |
| } | |
| skb = ieee80211_probereq_get(wl->hw, wl->vif->addr, ssid, ssid_len, | |
| req->ie_len); | |
| if (!skb) { | |
| ret = -ENOMEM; | |
| goto out_idle; | |
| } | |
| if (req->ie_len) | |
| memcpy(skb_put(skb, req->ie_len), req->ie, req->ie_len); | |
| ret = wl1251_cmd_template_set(wl, CMD_PROBE_REQ, skb->data, | |
| skb->len); | |
| dev_kfree_skb(skb); | |
| if (ret < 0) | |
| goto out_idle; | |
| ret = wl1251_cmd_trigger_scan_to(wl, 0); | |
| if (ret < 0) | |
| goto out_idle; | |
| wl->scanning = true; | |
| ret = wl1251_cmd_scan(wl, ssid, ssid_len, req->channels, | |
| req->n_channels, WL1251_SCAN_NUM_PROBES); | |
| if (ret < 0) { | |
| wl1251_debug(DEBUG_SCAN, "scan failed %d", ret); | |
| wl->scanning = false; | |
| goto out_idle; | |
| } | |
| goto out_sleep; | |
| out_idle: | |
| if (hw->conf.flags & IEEE80211_CONF_IDLE) | |
| ret = wl1251_ps_set_mode(wl, STATION_IDLE); | |
| out_sleep: | |
| wl1251_ps_elp_sleep(wl); | |
| out: | |
| mutex_unlock(&wl->mutex); | |
| return ret; | |
| } | |
| static int wl1251_op_set_rts_threshold(struct ieee80211_hw *hw, u32 value) | |
| { | |
| struct wl1251 *wl = hw->priv; | |
| int ret; | |
| mutex_lock(&wl->mutex); | |
| ret = wl1251_ps_elp_wakeup(wl); | |
| if (ret < 0) | |
| goto out; | |
| ret = wl1251_acx_rts_threshold(wl, (u16) value); | |
| if (ret < 0) | |
| wl1251_warning("wl1251_op_set_rts_threshold failed: %d", ret); | |
| wl1251_ps_elp_sleep(wl); | |
| out: | |
| mutex_unlock(&wl->mutex); | |
| return ret; | |
| } | |
| static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif, | |
| struct ieee80211_bss_conf *bss_conf, | |
| u32 changed) | |
| { | |
| struct wl1251 *wl = hw->priv; | |
| struct sk_buff *beacon, *skb; | |
| bool enable; | |
| int ret; | |
| wl1251_debug(DEBUG_MAC80211, "mac80211 bss info changed"); | |
| mutex_lock(&wl->mutex); | |
| ret = wl1251_ps_elp_wakeup(wl); | |
| if (ret < 0) | |
| goto out; | |
| if (changed & BSS_CHANGED_CQM) { | |
| ret = wl1251_acx_low_rssi(wl, bss_conf->cqm_rssi_thold, | |
| WL1251_DEFAULT_LOW_RSSI_WEIGHT, | |
| WL1251_DEFAULT_LOW_RSSI_DEPTH, | |
| WL1251_ACX_LOW_RSSI_TYPE_EDGE); | |
| if (ret < 0) | |
| goto out; | |
| wl->rssi_thold = bss_conf->cqm_rssi_thold; | |
| } | |
| if ((changed & BSS_CHANGED_BSSID) && | |
| memcmp(wl->bssid, bss_conf->bssid, ETH_ALEN)) { | |
| memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN); | |
| if (!is_zero_ether_addr(wl->bssid)) { | |
| ret = wl1251_build_null_data(wl); | |
| if (ret < 0) | |
| goto out_sleep; | |
| ret = wl1251_build_qos_null_data(wl); | |
| if (ret < 0) | |
| goto out_sleep; | |
| ret = wl1251_join(wl, wl->bss_type, wl->channel, | |
| wl->beacon_int, wl->dtim_period); | |
| if (ret < 0) | |
| goto out_sleep; | |
| } | |
| } | |
| if (changed & BSS_CHANGED_ASSOC) { | |
| if (bss_conf->assoc) { | |
| wl->beacon_int = bss_conf->beacon_int; | |
| skb = ieee80211_pspoll_get(wl->hw, wl->vif); | |
| if (!skb) | |
| goto out_sleep; | |
| ret = wl1251_cmd_template_set(wl, CMD_PS_POLL, | |
| skb->data, | |
| skb->len); | |
| dev_kfree_skb(skb); | |
| if (ret < 0) | |
| goto out_sleep; | |
| ret = wl1251_acx_aid(wl, bss_conf->aid); | |
| if (ret < 0) | |
| goto out_sleep; | |
| } else { | |
| /* use defaults when not associated */ | |
| wl->beacon_int = WL1251_DEFAULT_BEACON_INT; | |
| wl->dtim_period = WL1251_DEFAULT_DTIM_PERIOD; | |
| } | |
| } | |
| if (changed & BSS_CHANGED_ERP_SLOT) { | |
| if (bss_conf->use_short_slot) | |
| ret = wl1251_acx_slot(wl, SLOT_TIME_SHORT); | |
| else | |
| ret = wl1251_acx_slot(wl, SLOT_TIME_LONG); | |
| if (ret < 0) { | |
| wl1251_warning("Set slot time failed %d", ret); | |
| goto out_sleep; | |
| } | |
| } | |
| if (changed & BSS_CHANGED_ERP_PREAMBLE) { | |
| if (bss_conf->use_short_preamble) | |
| wl1251_acx_set_preamble(wl, ACX_PREAMBLE_SHORT); | |
| else | |
| wl1251_acx_set_preamble(wl, ACX_PREAMBLE_LONG); | |
| } | |
| if (changed & BSS_CHANGED_ERP_CTS_PROT) { | |
| if (bss_conf->use_cts_prot) | |
| ret = wl1251_acx_cts_protect(wl, CTSPROTECT_ENABLE); | |
| else | |
| ret = wl1251_acx_cts_protect(wl, CTSPROTECT_DISABLE); | |
| if (ret < 0) { | |
| wl1251_warning("Set ctsprotect failed %d", ret); | |
| goto out_sleep; | |
| } | |
| } | |
| if (changed & BSS_CHANGED_ARP_FILTER) { | |
| __be32 addr = bss_conf->arp_addr_list[0]; | |
| WARN_ON(wl->bss_type != BSS_TYPE_STA_BSS); | |
| enable = bss_conf->arp_addr_cnt == 1 && bss_conf->assoc; | |
| wl1251_acx_arp_ip_filter(wl, enable, addr); | |
| if (ret < 0) | |
| goto out_sleep; | |
| } | |
| if (changed & BSS_CHANGED_BEACON) { | |
| beacon = ieee80211_beacon_get(hw, vif); | |
| if (!beacon) | |
| goto out_sleep; | |
| ret = wl1251_cmd_template_set(wl, CMD_BEACON, beacon->data, | |
| beacon->len); | |
| if (ret < 0) { | |
| dev_kfree_skb(beacon); | |
| goto out_sleep; | |
| } | |
| ret = wl1251_cmd_template_set(wl, CMD_PROBE_RESP, beacon->data, | |
| beacon->len); | |
| dev_kfree_skb(beacon); | |
| if (ret < 0) | |
| goto out_sleep; | |
| ret = wl1251_join(wl, wl->bss_type, wl->channel, | |
| wl->beacon_int, wl->dtim_period); | |
| if (ret < 0) | |
| goto out_sleep; | |
| } | |
| out_sleep: | |
| wl1251_ps_elp_sleep(wl); | |
| out: | |
| mutex_unlock(&wl->mutex); | |
| } | |
| /* can't be const, mac80211 writes to this */ | |
| static struct ieee80211_rate wl1251_rates[] = { | |
| { .bitrate = 10, | |
| .hw_value = 0x1, | |
| .hw_value_short = 0x1, }, | |
| { .bitrate = 20, | |
| .hw_value = 0x2, | |
| .hw_value_short = 0x2, | |
| .flags = IEEE80211_RATE_SHORT_PREAMBLE }, | |
| { .bitrate = 55, | |
| .hw_value = 0x4, | |
| .hw_value_short = 0x4, | |
| .flags = IEEE80211_RATE_SHORT_PREAMBLE }, | |
| { .bitrate = 110, | |
| .hw_value = 0x20, | |
| .hw_value_short = 0x20, | |
| .flags = IEEE80211_RATE_SHORT_PREAMBLE }, | |
| { .bitrate = 60, | |
| .hw_value = 0x8, | |
| .hw_value_short = 0x8, }, | |
| { .bitrate = 90, | |
| .hw_value = 0x10, | |
| .hw_value_short = 0x10, }, | |
| { .bitrate = 120, | |
| .hw_value = 0x40, | |
| .hw_value_short = 0x40, }, | |
| { .bitrate = 180, | |
| .hw_value = 0x80, | |
| .hw_value_short = 0x80, }, | |
| { .bitrate = 240, | |
| .hw_value = 0x200, | |
| .hw_value_short = 0x200, }, | |
| { .bitrate = 360, | |
| .hw_value = 0x400, | |
| .hw_value_short = 0x400, }, | |
| { .bitrate = 480, | |
| .hw_value = 0x800, | |
| .hw_value_short = 0x800, }, | |
| { .bitrate = 540, | |
| .hw_value = 0x1000, | |
| .hw_value_short = 0x1000, }, | |
| }; | |
| /* can't be const, mac80211 writes to this */ | |
| static struct ieee80211_channel wl1251_channels[] = { | |
| { .hw_value = 1, .center_freq = 2412}, | |
| { .hw_value = 2, .center_freq = 2417}, | |
| { .hw_value = 3, .center_freq = 2422}, | |
| { .hw_value = 4, .center_freq = 2427}, | |
| { .hw_value = 5, .center_freq = 2432}, | |
| { .hw_value = 6, .center_freq = 2437}, | |
| { .hw_value = 7, .center_freq = 2442}, | |
| { .hw_value = 8, .center_freq = 2447}, | |
| { .hw_value = 9, .center_freq = 2452}, | |
| { .hw_value = 10, .center_freq = 2457}, | |
| { .hw_value = 11, .center_freq = 2462}, | |
| { .hw_value = 12, .center_freq = 2467}, | |
| { .hw_value = 13, .center_freq = 2472}, | |
| }; | |
| static int wl1251_op_conf_tx(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif, u16 queue, | |
| const struct ieee80211_tx_queue_params *params) | |
| { | |
| enum wl1251_acx_ps_scheme ps_scheme; | |
| struct wl1251 *wl = hw->priv; | |
| int ret; | |
| mutex_lock(&wl->mutex); | |
| wl1251_debug(DEBUG_MAC80211, "mac80211 conf tx %d", queue); | |
| ret = wl1251_ps_elp_wakeup(wl); | |
| if (ret < 0) | |
| goto out; | |
| /* mac80211 uses units of 32 usec */ | |
| ret = wl1251_acx_ac_cfg(wl, wl1251_tx_get_queue(queue), | |
| params->cw_min, params->cw_max, | |
| params->aifs, params->txop * 32); | |
| if (ret < 0) | |
| goto out_sleep; | |
| if (params->uapsd) | |
| ps_scheme = WL1251_ACX_PS_SCHEME_UPSD_TRIGGER; | |
| else | |
| ps_scheme = WL1251_ACX_PS_SCHEME_LEGACY; | |
| ret = wl1251_acx_tid_cfg(wl, wl1251_tx_get_queue(queue), | |
| CHANNEL_TYPE_EDCF, | |
| wl1251_tx_get_queue(queue), ps_scheme, | |
| WL1251_ACX_ACK_POLICY_LEGACY); | |
| if (ret < 0) | |
| goto out_sleep; | |
| out_sleep: | |
| wl1251_ps_elp_sleep(wl); | |
| out: | |
| mutex_unlock(&wl->mutex); | |
| return ret; | |
| } | |
| static int wl1251_op_get_survey(struct ieee80211_hw *hw, int idx, | |
| struct survey_info *survey) | |
| { | |
| struct wl1251 *wl = hw->priv; | |
| struct ieee80211_conf *conf = &hw->conf; | |
| if (idx != 0) | |
| return -ENOENT; | |
| survey->channel = conf->chandef.chan; | |
| survey->filled = SURVEY_INFO_NOISE_DBM; | |
| survey->noise = wl->noise; | |
| return 0; | |
| } | |
| /* can't be const, mac80211 writes to this */ | |
| static struct ieee80211_supported_band wl1251_band_2ghz = { | |
| .channels = wl1251_channels, | |
| .n_channels = ARRAY_SIZE(wl1251_channels), | |
| .bitrates = wl1251_rates, | |
| .n_bitrates = ARRAY_SIZE(wl1251_rates), | |
| }; | |
| static const struct ieee80211_ops wl1251_ops = { | |
| .start = wl1251_op_start, | |
| .stop = wl1251_op_stop, | |
| .add_interface = wl1251_op_add_interface, | |
| .remove_interface = wl1251_op_remove_interface, | |
| .config = wl1251_op_config, | |
| .prepare_multicast = wl1251_op_prepare_multicast, | |
| .configure_filter = wl1251_op_configure_filter, | |
| .tx = wl1251_op_tx, | |
| .set_key = wl1251_op_set_key, | |
| .hw_scan = wl1251_op_hw_scan, | |
| .bss_info_changed = wl1251_op_bss_info_changed, | |
| .set_rts_threshold = wl1251_op_set_rts_threshold, | |
| .conf_tx = wl1251_op_conf_tx, | |
| .get_survey = wl1251_op_get_survey, | |
| }; | |
| static int wl1251_read_eeprom_byte(struct wl1251 *wl, off_t offset, u8 *data) | |
| { | |
| unsigned long timeout; | |
| wl1251_reg_write32(wl, EE_ADDR, offset); | |
| wl1251_reg_write32(wl, EE_CTL, EE_CTL_READ); | |
| /* EE_CTL_READ clears when data is ready */ | |
| timeout = jiffies + msecs_to_jiffies(100); | |
| while (1) { | |
| if (!(wl1251_reg_read32(wl, EE_CTL) & EE_CTL_READ)) | |
| break; | |
| if (time_after(jiffies, timeout)) | |
| return -ETIMEDOUT; | |
| msleep(1); | |
| } | |
| *data = wl1251_reg_read32(wl, EE_DATA); | |
| return 0; | |
| } | |
| static int wl1251_read_eeprom(struct wl1251 *wl, off_t offset, | |
| u8 *data, size_t len) | |
| { | |
| size_t i; | |
| int ret; | |
| wl1251_reg_write32(wl, EE_START, 0); | |
| for (i = 0; i < len; i++) { | |
| ret = wl1251_read_eeprom_byte(wl, offset + i, &data[i]); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int wl1251_read_eeprom_mac(struct wl1251 *wl) | |
| { | |
| u8 mac[ETH_ALEN]; | |
| int i, ret; | |
| wl1251_set_partition(wl, 0, 0, REGISTERS_BASE, REGISTERS_DOWN_SIZE); | |
| ret = wl1251_read_eeprom(wl, 0x1c, mac, sizeof(mac)); | |
| if (ret < 0) { | |
| wl1251_warning("failed to read MAC address from EEPROM"); | |
| return ret; | |
| } | |
| /* MAC is stored in reverse order */ | |
| for (i = 0; i < ETH_ALEN; i++) | |
| wl->mac_addr[i] = mac[ETH_ALEN - i - 1]; | |
| return 0; | |
| } | |
| static int wl1251_register_hw(struct wl1251 *wl) | |
| { | |
| int ret; | |
| if (wl->mac80211_registered) | |
| return 0; | |
| SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr); | |
| ret = ieee80211_register_hw(wl->hw); | |
| if (ret < 0) { | |
| wl1251_error("unable to register mac80211 hw: %d", ret); | |
| return ret; | |
| } | |
| wl->mac80211_registered = true; | |
| wl1251_notice("loaded"); | |
| return 0; | |
| } | |
| int wl1251_init_ieee80211(struct wl1251 *wl) | |
| { | |
| int ret; | |
| /* The tx descriptor buffer and the TKIP space */ | |
| wl->hw->extra_tx_headroom = sizeof(struct tx_double_buffer_desc) | |
| + WL1251_TKIP_IV_SPACE; | |
| /* unit us */ | |
| /* FIXME: find a proper value */ | |
| ieee80211_hw_set(wl->hw, SIGNAL_DBM); | |
| ieee80211_hw_set(wl->hw, SUPPORTS_PS); | |
| wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | | |
| BIT(NL80211_IFTYPE_ADHOC); | |
| wl->hw->wiphy->max_scan_ssids = 1; | |
| wl->hw->wiphy->bands[NL80211_BAND_2GHZ] = &wl1251_band_2ghz; | |
| wl->hw->queues = 4; | |
| if (wl->use_eeprom) | |
| wl1251_read_eeprom_mac(wl); | |
| ret = wl1251_register_hw(wl); | |
| if (ret) | |
| goto out; | |
| wl1251_debugfs_init(wl); | |
| wl1251_notice("initialized"); | |
| ret = 0; | |
| out: | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(wl1251_init_ieee80211); | |
| struct ieee80211_hw *wl1251_alloc_hw(void) | |
| { | |
| struct ieee80211_hw *hw; | |
| struct wl1251 *wl; | |
| int i; | |
| static const u8 nokia_oui[3] = {0x00, 0x1f, 0xdf}; | |
| hw = ieee80211_alloc_hw(sizeof(*wl), &wl1251_ops); | |
| if (!hw) { | |
| wl1251_error("could not alloc ieee80211_hw"); | |
| return ERR_PTR(-ENOMEM); | |
| } | |
| wl = hw->priv; | |
| memset(wl, 0, sizeof(*wl)); | |
| wl->hw = hw; | |
| wl->data_in_count = 0; | |
| skb_queue_head_init(&wl->tx_queue); | |
| INIT_DELAYED_WORK(&wl->elp_work, wl1251_elp_work); | |
| wl->channel = WL1251_DEFAULT_CHANNEL; | |
| wl->monitor_present = false; | |
| wl->joined = false; | |
| wl->scanning = false; | |
| wl->bss_type = MAX_BSS_TYPE; | |
| wl->default_key = 0; | |
| wl->listen_int = 1; | |
| wl->rx_counter = 0; | |
| wl->rx_handled = 0; | |
| wl->rx_current_buffer = 0; | |
| wl->rx_last_id = 0; | |
| wl->rx_config = WL1251_DEFAULT_RX_CONFIG; | |
| wl->rx_filter = WL1251_DEFAULT_RX_FILTER; | |
| wl->elp = false; | |
| wl->station_mode = STATION_ACTIVE_MODE; | |
| wl->psm_requested = false; | |
| wl->psm_entry_retry = 0; | |
| wl->tx_queue_stopped = false; | |
| wl->power_level = WL1251_DEFAULT_POWER_LEVEL; | |
| wl->rssi_thold = 0; | |
| wl->beacon_int = WL1251_DEFAULT_BEACON_INT; | |
| wl->dtim_period = WL1251_DEFAULT_DTIM_PERIOD; | |
| wl->vif = NULL; | |
| for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++) | |
| wl->tx_frames[i] = NULL; | |
| wl->next_tx_complete = 0; | |
| INIT_WORK(&wl->irq_work, wl1251_irq_work); | |
| INIT_WORK(&wl->tx_work, wl1251_tx_work); | |
| /* | |
| * In case our MAC address is not correctly set, | |
| * we use a random but Nokia MAC. | |
| */ | |
| memcpy(wl->mac_addr, nokia_oui, 3); | |
| get_random_bytes(wl->mac_addr + 3, 3); | |
| wl->state = WL1251_STATE_OFF; | |
| mutex_init(&wl->mutex); | |
| wl->tx_mgmt_frm_rate = DEFAULT_HW_GEN_TX_RATE; | |
| wl->tx_mgmt_frm_mod = DEFAULT_HW_GEN_MODULATION_TYPE; | |
| wl->rx_descriptor = kmalloc(sizeof(*wl->rx_descriptor), GFP_KERNEL); | |
| if (!wl->rx_descriptor) { | |
| wl1251_error("could not allocate memory for rx descriptor"); | |
| ieee80211_free_hw(hw); | |
| return ERR_PTR(-ENOMEM); | |
| } | |
| return hw; | |
| } | |
| EXPORT_SYMBOL_GPL(wl1251_alloc_hw); | |
| int wl1251_free_hw(struct wl1251 *wl) | |
| { | |
| ieee80211_unregister_hw(wl->hw); | |
| wl1251_debugfs_exit(wl); | |
| kfree(wl->target_mem_map); | |
| kfree(wl->data_path); | |
| vfree(wl->fw); | |
| wl->fw = NULL; | |
| kfree(wl->nvs); | |
| wl->nvs = NULL; | |
| kfree(wl->rx_descriptor); | |
| wl->rx_descriptor = NULL; | |
| ieee80211_free_hw(wl->hw); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(wl1251_free_hw); | |
| MODULE_DESCRIPTION("TI wl1251 Wireless LAN Driver Core"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_AUTHOR("Kalle Valo <kvalo@adurom.com>"); | |
| MODULE_FIRMWARE(WL1251_FW_NAME); | |
| MODULE_FIRMWARE(WL1251_NVS_NAME); |