| /* | |
| * This file is part of wl1251 | |
| * | |
| * Copyright (c) 1998-2007 Texas Instruments Incorporated | |
| * Copyright (C) 2008 Nokia Corporation | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * version 2 as published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | |
| * 02110-1301 USA | |
| * | |
| */ | |
| #include <linux/skbuff.h> | |
| #include <linux/gfp.h> | |
| #include <net/mac80211.h> | |
| #include "wl1251.h" | |
| #include "reg.h" | |
| #include "io.h" | |
| #include "rx.h" | |
| #include "cmd.h" | |
| #include "acx.h" | |
| static void wl1251_rx_header(struct wl1251 *wl, | |
| struct wl1251_rx_descriptor *desc) | |
| { | |
| u32 rx_packet_ring_addr; | |
| rx_packet_ring_addr = wl->data_path->rx_packet_ring_addr; | |
| if (wl->rx_current_buffer) | |
| rx_packet_ring_addr += wl->data_path->rx_packet_ring_chunk_size; | |
| wl1251_mem_read(wl, rx_packet_ring_addr, desc, sizeof(*desc)); | |
| } | |
| static void wl1251_rx_status(struct wl1251 *wl, | |
| struct wl1251_rx_descriptor *desc, | |
| struct ieee80211_rx_status *status, | |
| u8 beacon) | |
| { | |
| u64 mactime; | |
| int ret; | |
| memset(status, 0, sizeof(struct ieee80211_rx_status)); | |
| status->band = NL80211_BAND_2GHZ; | |
| status->mactime = desc->timestamp; | |
| /* | |
| * The rx status timestamp is a 32 bits value while the TSF is a | |
| * 64 bits one. | |
| * For IBSS merging, TSF is mandatory, so we have to get it | |
| * somehow, so we ask for ACX_TSF_INFO. | |
| * That could be moved to the get_tsf() hook, but unfortunately, | |
| * this one must be atomic, while our SPI routines can sleep. | |
| */ | |
| if ((wl->bss_type == BSS_TYPE_IBSS) && beacon) { | |
| ret = wl1251_acx_tsf_info(wl, &mactime); | |
| if (ret == 0) | |
| status->mactime = mactime; | |
| } | |
| status->signal = desc->rssi; | |
| /* | |
| * FIXME: guessing that snr needs to be divided by two, otherwise | |
| * the values don't make any sense | |
| */ | |
| wl->noise = desc->rssi - desc->snr / 2; | |
| status->freq = ieee80211_channel_to_frequency(desc->channel, | |
| status->band); | |
| status->flag |= RX_FLAG_MACTIME_START; | |
| if (!wl->monitor_present && (desc->flags & RX_DESC_ENCRYPTION_MASK)) { | |
| status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED; | |
| if (likely(!(desc->flags & RX_DESC_DECRYPT_FAIL))) | |
| status->flag |= RX_FLAG_DECRYPTED; | |
| if (unlikely(desc->flags & RX_DESC_MIC_FAIL)) | |
| status->flag |= RX_FLAG_MMIC_ERROR; | |
| } | |
| if (unlikely(!(desc->flags & RX_DESC_VALID_FCS))) | |
| status->flag |= RX_FLAG_FAILED_FCS_CRC; | |
| switch (desc->rate) { | |
| /* skip 1 and 12 Mbps because they have same value 0x0a */ | |
| case RATE_2MBPS: | |
| status->rate_idx = 1; | |
| break; | |
| case RATE_5_5MBPS: | |
| status->rate_idx = 2; | |
| break; | |
| case RATE_11MBPS: | |
| status->rate_idx = 3; | |
| break; | |
| case RATE_6MBPS: | |
| status->rate_idx = 4; | |
| break; | |
| case RATE_9MBPS: | |
| status->rate_idx = 5; | |
| break; | |
| case RATE_18MBPS: | |
| status->rate_idx = 7; | |
| break; | |
| case RATE_24MBPS: | |
| status->rate_idx = 8; | |
| break; | |
| case RATE_36MBPS: | |
| status->rate_idx = 9; | |
| break; | |
| case RATE_48MBPS: | |
| status->rate_idx = 10; | |
| break; | |
| case RATE_54MBPS: | |
| status->rate_idx = 11; | |
| break; | |
| } | |
| /* for 1 and 12 Mbps we have to check the modulation */ | |
| if (desc->rate == RATE_1MBPS) { | |
| if (!(desc->mod_pre & OFDM_RATE_BIT)) | |
| /* CCK -> RATE_1MBPS */ | |
| status->rate_idx = 0; | |
| else | |
| /* OFDM -> RATE_12MBPS */ | |
| status->rate_idx = 6; | |
| } | |
| if (desc->mod_pre & SHORT_PREAMBLE_BIT) | |
| status->flag |= RX_FLAG_SHORTPRE; | |
| } | |
| static void wl1251_rx_body(struct wl1251 *wl, | |
| struct wl1251_rx_descriptor *desc) | |
| { | |
| struct sk_buff *skb; | |
| struct ieee80211_rx_status status; | |
| u8 *rx_buffer, beacon = 0; | |
| u16 length, *fc; | |
| u32 curr_id, last_id_inc, rx_packet_ring_addr; | |
| length = WL1251_RX_ALIGN(desc->length - PLCP_HEADER_LENGTH); | |
| curr_id = (desc->flags & RX_DESC_SEQNUM_MASK) >> RX_DESC_PACKETID_SHIFT; | |
| last_id_inc = (wl->rx_last_id + 1) % (RX_MAX_PACKET_ID + 1); | |
| if (last_id_inc != curr_id) { | |
| wl1251_warning("curr ID:%d, last ID inc:%d", | |
| curr_id, last_id_inc); | |
| wl->rx_last_id = curr_id; | |
| } else { | |
| wl->rx_last_id = last_id_inc; | |
| } | |
| rx_packet_ring_addr = wl->data_path->rx_packet_ring_addr + | |
| sizeof(struct wl1251_rx_descriptor) + 20; | |
| if (wl->rx_current_buffer) | |
| rx_packet_ring_addr += wl->data_path->rx_packet_ring_chunk_size; | |
| skb = __dev_alloc_skb(length, GFP_KERNEL); | |
| if (!skb) { | |
| wl1251_error("Couldn't allocate RX frame"); | |
| return; | |
| } | |
| rx_buffer = skb_put(skb, length); | |
| wl1251_mem_read(wl, rx_packet_ring_addr, rx_buffer, length); | |
| /* The actual length doesn't include the target's alignment */ | |
| skb_trim(skb, desc->length - PLCP_HEADER_LENGTH); | |
| fc = (u16 *)skb->data; | |
| if ((*fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_BEACON) | |
| beacon = 1; | |
| wl1251_rx_status(wl, desc, &status, beacon); | |
| wl1251_debug(DEBUG_RX, "rx skb 0x%p: %d B %s", skb, skb->len, | |
| beacon ? "beacon" : ""); | |
| memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status)); | |
| ieee80211_rx_ni(wl->hw, skb); | |
| } | |
| static void wl1251_rx_ack(struct wl1251 *wl) | |
| { | |
| u32 data, addr; | |
| if (wl->rx_current_buffer) { | |
| addr = ACX_REG_INTERRUPT_TRIG_H; | |
| data = INTR_TRIG_RX_PROC1; | |
| } else { | |
| addr = ACX_REG_INTERRUPT_TRIG; | |
| data = INTR_TRIG_RX_PROC0; | |
| } | |
| wl1251_reg_write32(wl, addr, data); | |
| /* Toggle buffer ring */ | |
| wl->rx_current_buffer = !wl->rx_current_buffer; | |
| } | |
| void wl1251_rx(struct wl1251 *wl) | |
| { | |
| struct wl1251_rx_descriptor *rx_desc; | |
| if (wl->state != WL1251_STATE_ON) | |
| return; | |
| rx_desc = wl->rx_descriptor; | |
| /* We first read the frame's header */ | |
| wl1251_rx_header(wl, rx_desc); | |
| /* Now we can read the body */ | |
| wl1251_rx_body(wl, rx_desc); | |
| /* Finally, we need to ACK the RX */ | |
| wl1251_rx_ack(wl); | |
| } |