| /* | |
| * I2C Link Layer for Samsung S3FWRN5 NCI based Driver | |
| * | |
| * Copyright (C) 2015 Samsung Electrnoics | |
| * Robert Baldyga <r.baldyga@samsung.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms and conditions of the GNU General Public License, | |
| * version 2 or later, as published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, see <http://www.gnu.org/licenses/>. | |
| */ | |
| #include <linux/i2c.h> | |
| #include <linux/gpio.h> | |
| #include <linux/delay.h> | |
| #include <linux/of_gpio.h> | |
| #include <linux/of_irq.h> | |
| #include <linux/module.h> | |
| #include <net/nfc/nfc.h> | |
| #include "s3fwrn5.h" | |
| #define S3FWRN5_I2C_DRIVER_NAME "s3fwrn5_i2c" | |
| #define S3FWRN5_I2C_MAX_PAYLOAD 32 | |
| #define S3FWRN5_EN_WAIT_TIME 150 | |
| struct s3fwrn5_i2c_phy { | |
| struct i2c_client *i2c_dev; | |
| struct nci_dev *ndev; | |
| unsigned int gpio_en; | |
| unsigned int gpio_fw_wake; | |
| struct mutex mutex; | |
| enum s3fwrn5_mode mode; | |
| unsigned int irq_skip:1; | |
| }; | |
| static void s3fwrn5_i2c_set_wake(void *phy_id, bool wake) | |
| { | |
| struct s3fwrn5_i2c_phy *phy = phy_id; | |
| mutex_lock(&phy->mutex); | |
| gpio_set_value(phy->gpio_fw_wake, wake); | |
| msleep(S3FWRN5_EN_WAIT_TIME/2); | |
| mutex_unlock(&phy->mutex); | |
| } | |
| static void s3fwrn5_i2c_set_mode(void *phy_id, enum s3fwrn5_mode mode) | |
| { | |
| struct s3fwrn5_i2c_phy *phy = phy_id; | |
| mutex_lock(&phy->mutex); | |
| if (phy->mode == mode) | |
| goto out; | |
| phy->mode = mode; | |
| gpio_set_value(phy->gpio_en, 1); | |
| gpio_set_value(phy->gpio_fw_wake, 0); | |
| if (mode == S3FWRN5_MODE_FW) | |
| gpio_set_value(phy->gpio_fw_wake, 1); | |
| if (mode != S3FWRN5_MODE_COLD) { | |
| msleep(S3FWRN5_EN_WAIT_TIME); | |
| gpio_set_value(phy->gpio_en, 0); | |
| msleep(S3FWRN5_EN_WAIT_TIME/2); | |
| } | |
| phy->irq_skip = true; | |
| out: | |
| mutex_unlock(&phy->mutex); | |
| } | |
| static enum s3fwrn5_mode s3fwrn5_i2c_get_mode(void *phy_id) | |
| { | |
| struct s3fwrn5_i2c_phy *phy = phy_id; | |
| enum s3fwrn5_mode mode; | |
| mutex_lock(&phy->mutex); | |
| mode = phy->mode; | |
| mutex_unlock(&phy->mutex); | |
| return mode; | |
| } | |
| static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb) | |
| { | |
| struct s3fwrn5_i2c_phy *phy = phy_id; | |
| int ret; | |
| mutex_lock(&phy->mutex); | |
| phy->irq_skip = false; | |
| ret = i2c_master_send(phy->i2c_dev, skb->data, skb->len); | |
| if (ret == -EREMOTEIO) { | |
| /* Retry, chip was in standby */ | |
| usleep_range(110000, 120000); | |
| ret = i2c_master_send(phy->i2c_dev, skb->data, skb->len); | |
| } | |
| mutex_unlock(&phy->mutex); | |
| if (ret < 0) | |
| return ret; | |
| if (ret != skb->len) | |
| return -EREMOTEIO; | |
| return 0; | |
| } | |
| static const struct s3fwrn5_phy_ops i2c_phy_ops = { | |
| .set_wake = s3fwrn5_i2c_set_wake, | |
| .set_mode = s3fwrn5_i2c_set_mode, | |
| .get_mode = s3fwrn5_i2c_get_mode, | |
| .write = s3fwrn5_i2c_write, | |
| }; | |
| static int s3fwrn5_i2c_read(struct s3fwrn5_i2c_phy *phy) | |
| { | |
| struct sk_buff *skb; | |
| size_t hdr_size; | |
| size_t data_len; | |
| char hdr[4]; | |
| int ret; | |
| hdr_size = (phy->mode == S3FWRN5_MODE_NCI) ? | |
| NCI_CTRL_HDR_SIZE : S3FWRN5_FW_HDR_SIZE; | |
| ret = i2c_master_recv(phy->i2c_dev, hdr, hdr_size); | |
| if (ret < 0) | |
| return ret; | |
| if (ret < hdr_size) | |
| return -EBADMSG; | |
| data_len = (phy->mode == S3FWRN5_MODE_NCI) ? | |
| ((struct nci_ctrl_hdr *)hdr)->plen : | |
| ((struct s3fwrn5_fw_header *)hdr)->len; | |
| skb = alloc_skb(hdr_size + data_len, GFP_KERNEL); | |
| if (!skb) | |
| return -ENOMEM; | |
| memcpy(skb_put(skb, hdr_size), hdr, hdr_size); | |
| if (data_len == 0) | |
| goto out; | |
| ret = i2c_master_recv(phy->i2c_dev, skb_put(skb, data_len), data_len); | |
| if (ret != data_len) { | |
| kfree_skb(skb); | |
| return -EBADMSG; | |
| } | |
| out: | |
| return s3fwrn5_recv_frame(phy->ndev, skb, phy->mode); | |
| } | |
| static irqreturn_t s3fwrn5_i2c_irq_thread_fn(int irq, void *phy_id) | |
| { | |
| struct s3fwrn5_i2c_phy *phy = phy_id; | |
| int ret = 0; | |
| if (!phy || !phy->ndev) { | |
| WARN_ON_ONCE(1); | |
| return IRQ_NONE; | |
| } | |
| mutex_lock(&phy->mutex); | |
| if (phy->irq_skip) | |
| goto out; | |
| switch (phy->mode) { | |
| case S3FWRN5_MODE_NCI: | |
| case S3FWRN5_MODE_FW: | |
| ret = s3fwrn5_i2c_read(phy); | |
| break; | |
| case S3FWRN5_MODE_COLD: | |
| ret = -EREMOTEIO; | |
| break; | |
| } | |
| out: | |
| mutex_unlock(&phy->mutex); | |
| return IRQ_HANDLED; | |
| } | |
| static int s3fwrn5_i2c_parse_dt(struct i2c_client *client) | |
| { | |
| struct s3fwrn5_i2c_phy *phy = i2c_get_clientdata(client); | |
| struct device_node *np = client->dev.of_node; | |
| if (!np) | |
| return -ENODEV; | |
| phy->gpio_en = of_get_named_gpio(np, "s3fwrn5,en-gpios", 0); | |
| if (!gpio_is_valid(phy->gpio_en)) | |
| return -ENODEV; | |
| phy->gpio_fw_wake = of_get_named_gpio(np, "s3fwrn5,fw-gpios", 0); | |
| if (!gpio_is_valid(phy->gpio_fw_wake)) | |
| return -ENODEV; | |
| return 0; | |
| } | |
| static int s3fwrn5_i2c_probe(struct i2c_client *client, | |
| const struct i2c_device_id *id) | |
| { | |
| struct s3fwrn5_i2c_phy *phy; | |
| int ret; | |
| phy = devm_kzalloc(&client->dev, sizeof(*phy), GFP_KERNEL); | |
| if (!phy) | |
| return -ENOMEM; | |
| mutex_init(&phy->mutex); | |
| phy->mode = S3FWRN5_MODE_COLD; | |
| phy->irq_skip = true; | |
| phy->i2c_dev = client; | |
| i2c_set_clientdata(client, phy); | |
| ret = s3fwrn5_i2c_parse_dt(client); | |
| if (ret < 0) | |
| return ret; | |
| ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_en, | |
| GPIOF_OUT_INIT_HIGH, "s3fwrn5_en"); | |
| if (ret < 0) | |
| return ret; | |
| ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_fw_wake, | |
| GPIOF_OUT_INIT_LOW, "s3fwrn5_fw_wake"); | |
| if (ret < 0) | |
| return ret; | |
| ret = s3fwrn5_probe(&phy->ndev, phy, &phy->i2c_dev->dev, &i2c_phy_ops, | |
| S3FWRN5_I2C_MAX_PAYLOAD); | |
| if (ret < 0) | |
| return ret; | |
| ret = devm_request_threaded_irq(&client->dev, phy->i2c_dev->irq, NULL, | |
| s3fwrn5_i2c_irq_thread_fn, IRQF_TRIGGER_HIGH | IRQF_ONESHOT, | |
| S3FWRN5_I2C_DRIVER_NAME, phy); | |
| if (ret) | |
| s3fwrn5_remove(phy->ndev); | |
| return ret; | |
| } | |
| static int s3fwrn5_i2c_remove(struct i2c_client *client) | |
| { | |
| struct s3fwrn5_i2c_phy *phy = i2c_get_clientdata(client); | |
| s3fwrn5_remove(phy->ndev); | |
| return 0; | |
| } | |
| static struct i2c_device_id s3fwrn5_i2c_id_table[] = { | |
| {S3FWRN5_I2C_DRIVER_NAME, 0}, | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, s3fwrn5_i2c_id_table); | |
| static const struct of_device_id of_s3fwrn5_i2c_match[] = { | |
| { .compatible = "samsung,s3fwrn5-i2c", }, | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(of, of_s3fwrn5_i2c_match); | |
| static struct i2c_driver s3fwrn5_i2c_driver = { | |
| .driver = { | |
| .owner = THIS_MODULE, | |
| .name = S3FWRN5_I2C_DRIVER_NAME, | |
| .of_match_table = of_match_ptr(of_s3fwrn5_i2c_match), | |
| }, | |
| .probe = s3fwrn5_i2c_probe, | |
| .remove = s3fwrn5_i2c_remove, | |
| .id_table = s3fwrn5_i2c_id_table, | |
| }; | |
| module_i2c_driver(s3fwrn5_i2c_driver); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_DESCRIPTION("I2C driver for Samsung S3FWRN5"); | |
| MODULE_AUTHOR("Robert Baldyga <r.baldyga@samsung.com>"); |