| menuconfig NVMEM | |
| tristate "NVMEM Support" | |
| help | |
| Support for NVMEM(Non Volatile Memory) devices like EEPROM, EFUSES... | |
| This framework is designed to provide a generic interface to NVMEM | |
| from both the Linux Kernel and the userspace. | |
| This driver can also be built as a module. If so, the module | |
| will be called nvmem_core. | |
| If unsure, say no. | |
| if NVMEM | |
| config NVMEM_IMX_OCOTP | |
| tristate "i.MX6 On-Chip OTP Controller support" | |
| depends on SOC_IMX6 || COMPILE_TEST | |
| depends on HAS_IOMEM | |
| help | |
| This is a driver for the On-Chip OTP Controller (OCOTP) available on | |
| i.MX6 SoCs, providing access to 4 Kbits of one-time programmable | |
| eFuses. | |
| This driver can also be built as a module. If so, the module | |
| will be called nvmem-imx-ocotp. | |
| config NVMEM_LPC18XX_EEPROM | |
| tristate "NXP LPC18XX EEPROM Memory Support" | |
| depends on ARCH_LPC18XX || COMPILE_TEST | |
| depends on HAS_IOMEM | |
| help | |
| Say Y here to include support for NXP LPC18xx EEPROM memory found in | |
| NXP LPC185x/3x and LPC435x/3x/2x/1x devices. | |
| To compile this driver as a module, choose M here: the module | |
| will be called nvmem_lpc18xx_eeprom. | |
| config NVMEM_MXS_OCOTP | |
| tristate "Freescale MXS On-Chip OTP Memory Support" | |
| depends on ARCH_MXS || COMPILE_TEST | |
| depends on HAS_IOMEM | |
| help | |
| If you say Y here, you will get readonly access to the | |
| One Time Programmable memory pages that are stored | |
| on the Freescale i.MX23/i.MX28 processor. | |
| This driver can also be built as a module. If so, the module | |
| will be called nvmem-mxs-ocotp. | |
| config MTK_EFUSE | |
| tristate "Mediatek SoCs EFUSE support" | |
| depends on ARCH_MEDIATEK || COMPILE_TEST | |
| depends on HAS_IOMEM | |
| help | |
| This is a driver to access hardware related data like sensor | |
| calibration, HDMI impedance etc. | |
| This driver can also be built as a module. If so, the module | |
| will be called efuse-mtk. | |
| config QCOM_QFPROM | |
| tristate "QCOM QFPROM Support" | |
| depends on ARCH_QCOM || COMPILE_TEST | |
| depends on HAS_IOMEM | |
| help | |
| Say y here to enable QFPROM support. The QFPROM provides access | |
| functions for QFPROM data to rest of the drivers via nvmem interface. | |
| This driver can also be built as a module. If so, the module | |
| will be called nvmem_qfprom. | |
| config ROCKCHIP_EFUSE | |
| tristate "Rockchip eFuse Support" | |
| depends on ARCH_ROCKCHIP || COMPILE_TEST | |
| depends on HAS_IOMEM | |
| help | |
| This is a simple drive to dump specified values of Rockchip SoC | |
| from eFuse, such as cpu-leakage. | |
| This driver can also be built as a module. If so, the module | |
| will be called nvmem_rockchip_efuse. | |
| config NVMEM_SUNXI_SID | |
| tristate "Allwinner SoCs SID support" | |
| depends on ARCH_SUNXI | |
| help | |
| This is a driver for the 'security ID' available on various Allwinner | |
| devices. | |
| This driver can also be built as a module. If so, the module | |
| will be called nvmem_sunxi_sid. | |
| config NVMEM_VF610_OCOTP | |
| tristate "VF610 SoC OCOTP support" | |
| depends on SOC_VF610 || COMPILE_TEST | |
| depends on HAS_IOMEM | |
| help | |
| This is a driver for the 'OCOTP' peripheral available on Vybrid | |
| devices like VF5xx and VF6xx. | |
| This driver can also be build as a module. If so, the module will | |
| be called nvmem-vf610-ocotp. | |
| config MESON_EFUSE | |
| tristate "Amlogic eFuse Support" | |
| depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM | |
| help | |
| This is a driver to retrieve specific values from the eFuse found on | |
| the Amlogic Meson SoCs. | |
| This driver can also be built as a module. If so, the module | |
| will be called nvmem_meson_efuse. | |
| endif |