| # | |
| # PHY | |
| # | |
| menu "PHY Subsystem" | |
| config GENERIC_PHY | |
| bool "PHY Core" | |
| help | |
| Generic PHY support. | |
| This framework is designed to provide a generic interface for PHY | |
| devices present in the kernel. This layer will have the generic | |
| API by which phy drivers can create PHY using the phy framework and | |
| phy users can obtain reference to the PHY. All the users of this | |
| framework should select this config. | |
| config PHY_BCM_NS_USB2 | |
| tristate "Broadcom Northstar USB 2.0 PHY Driver" | |
| depends on ARCH_BCM_IPROC || COMPILE_TEST | |
| depends on HAS_IOMEM && OF | |
| select GENERIC_PHY | |
| help | |
| Enable this to support Broadcom USB 2.0 PHY connected to the USB | |
| controller on Northstar family. | |
| config PHY_BCM_NS_USB3 | |
| tristate "Broadcom Northstar USB 3.0 PHY Driver" | |
| depends on ARCH_BCM_IPROC || COMPILE_TEST | |
| depends on HAS_IOMEM && OF | |
| select GENERIC_PHY | |
| help | |
| Enable this to support Broadcom USB 3.0 PHY connected to the USB | |
| controller on Northstar family. | |
| config PHY_BERLIN_USB | |
| tristate "Marvell Berlin USB PHY Driver" | |
| depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF | |
| select GENERIC_PHY | |
| help | |
| Enable this to support the USB PHY on Marvell Berlin SoCs. | |
| config PHY_BERLIN_SATA | |
| tristate "Marvell Berlin SATA PHY driver" | |
| depends on ARCH_BERLIN && HAS_IOMEM && OF | |
| select GENERIC_PHY | |
| help | |
| Enable this to support the SATA PHY on Marvell Berlin SoCs. | |
| config ARMADA375_USBCLUSTER_PHY | |
| def_bool y | |
| depends on MACH_ARMADA_375 || COMPILE_TEST | |
| depends on OF && HAS_IOMEM | |
| select GENERIC_PHY | |
| config PHY_DA8XX_USB | |
| tristate "TI DA8xx USB PHY Driver" | |
| depends on ARCH_DAVINCI_DA8XX | |
| select GENERIC_PHY | |
| select MFD_SYSCON | |
| help | |
| Enable this to support the USB PHY on DA8xx SoCs. | |
| This driver controls both the USB 1.1 PHY and the USB 2.0 PHY. | |
| config PHY_DM816X_USB | |
| tristate "TI dm816x USB PHY driver" | |
| depends on ARCH_OMAP2PLUS | |
| depends on USB_SUPPORT | |
| select GENERIC_PHY | |
| select USB_PHY | |
| help | |
| Enable this for dm816x USB to work. | |
| config PHY_EXYNOS_MIPI_VIDEO | |
| tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" | |
| depends on HAS_IOMEM | |
| depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST | |
| select GENERIC_PHY | |
| default y if ARCH_S5PV210 || ARCH_EXYNOS | |
| help | |
| Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P | |
| and EXYNOS SoCs. | |
| config PHY_LPC18XX_USB_OTG | |
| tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver" | |
| depends on OF && (ARCH_LPC18XX || COMPILE_TEST) | |
| depends on MFD_SYSCON | |
| select GENERIC_PHY | |
| help | |
| Enable this to support NXP LPC18xx/43xx internal USB OTG PHY. | |
| This driver is need for USB0 support on LPC18xx/43xx and takes | |
| care of enabling and clock setup. | |
| config PHY_PXA_28NM_HSIC | |
| tristate "Marvell USB HSIC 28nm PHY Driver" | |
| depends on HAS_IOMEM | |
| select GENERIC_PHY | |
| help | |
| Enable this to support Marvell USB HSIC PHY driver for Marvell | |
| SoC. This driver will do the PHY initialization and shutdown. | |
| The PHY driver will be used by Marvell ehci driver. | |
| To compile this driver as a module, choose M here. | |
| config PHY_PXA_28NM_USB2 | |
| tristate "Marvell USB 2.0 28nm PHY Driver" | |
| depends on HAS_IOMEM | |
| select GENERIC_PHY | |
| help | |
| Enable this to support Marvell USB 2.0 PHY driver for Marvell | |
| SoC. This driver will do the PHY initialization and shutdown. | |
| The PHY driver will be used by Marvell udc/ehci/otg driver. | |
| To compile this driver as a module, choose M here. | |
| config PHY_MVEBU_SATA | |
| def_bool y | |
| depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD | |
| depends on OF | |
| select GENERIC_PHY | |
| config PHY_MIPHY28LP | |
| tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407" | |
| depends on ARCH_STI | |
| select GENERIC_PHY | |
| help | |
| Enable this to support the miphy transceiver (for SATA/PCIE/USB3) | |
| that is part of STMicroelectronics STiH407 SoC. | |
| config PHY_MIPHY365X | |
| tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series" | |
| depends on ARCH_STI | |
| depends on HAS_IOMEM | |
| depends on OF | |
| select GENERIC_PHY | |
| help | |
| Enable this to support the miphy transceiver (for SATA/PCIE) | |
| that is part of STMicroelectronics STiH41x SoC series. | |
| config PHY_RCAR_GEN2 | |
| tristate "Renesas R-Car generation 2 USB PHY driver" | |
| depends on ARCH_RENESAS | |
| depends on GENERIC_PHY | |
| help | |
| Support for USB PHY found on Renesas R-Car generation 2 SoCs. | |
| config PHY_RCAR_GEN3_USB2 | |
| tristate "Renesas R-Car generation 3 USB 2.0 PHY driver" | |
| depends on ARCH_RENESAS | |
| depends on EXTCON | |
| select GENERIC_PHY | |
| help | |
| Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs. | |
| config OMAP_CONTROL_PHY | |
| tristate "OMAP CONTROL PHY Driver" | |
| depends on ARCH_OMAP2PLUS || COMPILE_TEST | |
| help | |
| Enable this to add support for the PHY part present in the control | |
| module. This driver has API to power on the USB2 PHY and to write to | |
| the mailbox. The mailbox is present only in omap4 and the register to | |
| power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an | |
| additional register to power on USB3 PHY/SATA PHY/PCIE PHY | |
| (PIPE3 PHY). | |
| config OMAP_USB2 | |
| tristate "OMAP USB2 PHY Driver" | |
| depends on ARCH_OMAP2PLUS | |
| depends on USB_SUPPORT | |
| select GENERIC_PHY | |
| select USB_PHY | |
| select OMAP_CONTROL_PHY | |
| depends on OMAP_OCP2SCP | |
| help | |
| Enable this to support the transceiver that is part of SOC. This | |
| driver takes care of all the PHY functionality apart from comparator. | |
| The USB OTG controller communicates with the comparator using this | |
| driver. | |
| config TI_PIPE3 | |
| tristate "TI PIPE3 PHY Driver" | |
| depends on ARCH_OMAP2PLUS || COMPILE_TEST | |
| select GENERIC_PHY | |
| select OMAP_CONTROL_PHY | |
| depends on OMAP_OCP2SCP | |
| help | |
| Enable this to support the PIPE3 PHY that is part of TI SOCs. This | |
| driver takes care of all the PHY functionality apart from comparator. | |
| This driver interacts with the "OMAP Control PHY Driver" to power | |
| on/off the PHY. | |
| config TWL4030_USB | |
| tristate "TWL4030 USB Transceiver Driver" | |
| depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS | |
| depends on USB_SUPPORT | |
| depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't 'y' | |
| select GENERIC_PHY | |
| select USB_PHY | |
| help | |
| Enable this to support the USB OTG transceiver on TWL4030 | |
| family chips (including the TWL5030 and TPS659x0 devices). | |
| This transceiver supports high and full speed devices plus, | |
| in host mode, low speed. | |
| config PHY_EXYNOS_DP_VIDEO | |
| tristate "EXYNOS SoC series Display Port PHY driver" | |
| depends on OF | |
| depends on ARCH_EXYNOS || COMPILE_TEST | |
| default ARCH_EXYNOS | |
| select GENERIC_PHY | |
| help | |
| Support for Display Port PHY found on Samsung EXYNOS SoCs. | |
| config BCM_KONA_USB2_PHY | |
| tristate "Broadcom Kona USB2 PHY Driver" | |
| depends on HAS_IOMEM | |
| select GENERIC_PHY | |
| help | |
| Enable this to support the Broadcom Kona USB 2.0 PHY. | |
| config PHY_EXYNOS5250_SATA | |
| tristate "Exynos5250 Sata SerDes/PHY driver" | |
| depends on SOC_EXYNOS5250 | |
| depends on HAS_IOMEM | |
| depends on OF | |
| select GENERIC_PHY | |
| select I2C | |
| select I2C_S3C2410 | |
| select MFD_SYSCON | |
| help | |
| Enable this to support SATA SerDes/Phy found on Samsung's | |
| Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s, | |
| SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host | |
| port to accept one SATA device. | |
| config PHY_HIX5HD2_SATA | |
| tristate "HIX5HD2 SATA PHY Driver" | |
| depends on ARCH_HIX5HD2 && OF && HAS_IOMEM | |
| select GENERIC_PHY | |
| select MFD_SYSCON | |
| help | |
| Support for SATA PHY on Hisilicon hix5hd2 Soc. | |
| config PHY_MT65XX_USB3 | |
| tristate "Mediatek USB3.0 PHY Driver" | |
| depends on ARCH_MEDIATEK && OF | |
| select GENERIC_PHY | |
| help | |
| Say 'Y' here to add support for Mediatek USB3.0 PHY driver, | |
| it supports multiple usb2.0 and usb3.0 ports. | |
| config PHY_HI6220_USB | |
| tristate "hi6220 USB PHY support" | |
| depends on (ARCH_HISI && ARM64) || COMPILE_TEST | |
| select GENERIC_PHY | |
| select MFD_SYSCON | |
| help | |
| Enable this to support the HISILICON HI6220 USB PHY. | |
| To compile this driver as a module, choose M here. | |
| config PHY_SUN4I_USB | |
| tristate "Allwinner sunxi SoC USB PHY driver" | |
| depends on ARCH_SUNXI && HAS_IOMEM && OF | |
| depends on RESET_CONTROLLER | |
| depends on EXTCON | |
| depends on POWER_SUPPLY | |
| depends on USB_SUPPORT | |
| select GENERIC_PHY | |
| select USB_COMMON | |
| help | |
| Enable this to support the transceiver that is part of Allwinner | |
| sunxi SoCs. | |
| This driver controls the entire USB PHY block, both the USB OTG | |
| parts, as well as the 2 regular USB 2 host PHYs. | |
| config PHY_SUN9I_USB | |
| tristate "Allwinner sun9i SoC USB PHY driver" | |
| depends on ARCH_SUNXI && HAS_IOMEM && OF | |
| depends on RESET_CONTROLLER | |
| depends on USB_SUPPORT | |
| select USB_COMMON | |
| select GENERIC_PHY | |
| help | |
| Enable this to support the transceiver that is part of Allwinner | |
| sun9i SoCs. | |
| This driver controls each individual USB 2 host PHY. | |
| config PHY_SAMSUNG_USB2 | |
| tristate "Samsung USB 2.0 PHY driver" | |
| depends on HAS_IOMEM | |
| depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 | |
| select GENERIC_PHY | |
| select MFD_SYSCON | |
| default ARCH_EXYNOS | |
| help | |
| Enable this to support the Samsung USB 2.0 PHY driver for Samsung | |
| SoCs. This driver provides the interface for USB 2.0 PHY. Support | |
| for particular PHYs will be enabled based on the SoC type in addition | |
| to this driver. | |
| config PHY_S5PV210_USB2 | |
| bool "Support for S5PV210" | |
| depends on PHY_SAMSUNG_USB2 | |
| depends on ARCH_S5PV210 | |
| help | |
| Enable USB PHY support for S5PV210. This option requires that Samsung | |
| USB 2.0 PHY driver is enabled and means that support for this | |
| particular SoC is compiled in the driver. In case of S5PV210 two phys | |
| are available - device and host. | |
| config PHY_EXYNOS4210_USB2 | |
| bool | |
| depends on PHY_SAMSUNG_USB2 | |
| default CPU_EXYNOS4210 | |
| config PHY_EXYNOS4X12_USB2 | |
| bool | |
| depends on PHY_SAMSUNG_USB2 | |
| default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412 | |
| config PHY_EXYNOS5250_USB2 | |
| bool | |
| depends on PHY_SAMSUNG_USB2 | |
| default SOC_EXYNOS5250 || SOC_EXYNOS5420 | |
| config PHY_EXYNOS5_USBDRD | |
| tristate "Exynos5 SoC series USB DRD PHY driver" | |
| depends on ARCH_EXYNOS && OF | |
| depends on HAS_IOMEM | |
| depends on USB_DWC3_EXYNOS | |
| select GENERIC_PHY | |
| select MFD_SYSCON | |
| default y | |
| help | |
| Enable USB DRD PHY support for Exynos 5 SoC series. | |
| This driver provides PHY interface for USB 3.0 DRD controller | |
| present on Exynos5 SoC series. | |
| config PHY_PISTACHIO_USB | |
| tristate "IMG Pistachio USB2.0 PHY driver" | |
| depends on MACH_PISTACHIO | |
| select GENERIC_PHY | |
| help | |
| Enable this to support the USB2.0 PHY on the IMG Pistachio SoC. | |
| config PHY_QCOM_APQ8064_SATA | |
| tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" | |
| depends on ARCH_QCOM | |
| depends on HAS_IOMEM | |
| depends on OF | |
| select GENERIC_PHY | |
| config PHY_QCOM_IPQ806X_SATA | |
| tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" | |
| depends on ARCH_QCOM | |
| depends on HAS_IOMEM | |
| depends on OF | |
| select GENERIC_PHY | |
| config PHY_ROCKCHIP_USB | |
| tristate "Rockchip USB2 PHY Driver" | |
| depends on ARCH_ROCKCHIP && OF | |
| select GENERIC_PHY | |
| help | |
| Enable this to support the Rockchip USB 2.0 PHY. | |
| config PHY_ROCKCHIP_INNO_USB2 | |
| tristate "Rockchip INNO USB2PHY Driver" | |
| depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF | |
| depends on COMMON_CLK | |
| select GENERIC_PHY | |
| help | |
| Support for Rockchip USB2.0 PHY with Innosilicon IP block. | |
| config PHY_ROCKCHIP_EMMC | |
| tristate "Rockchip EMMC PHY Driver" | |
| depends on ARCH_ROCKCHIP && OF | |
| select GENERIC_PHY | |
| help | |
| Enable this to support the Rockchip EMMC PHY. | |
| config PHY_ROCKCHIP_DP | |
| tristate "Rockchip Display Port PHY Driver" | |
| depends on ARCH_ROCKCHIP && OF | |
| select GENERIC_PHY | |
| help | |
| Enable this to support the Rockchip Display Port PHY. | |
| config PHY_ROCKCHIP_PCIE | |
| tristate "Rockchip PCIe PHY Driver" | |
| depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST | |
| select GENERIC_PHY | |
| select MFD_SYSCON | |
| help | |
| Enable this to support the Rockchip PCIe PHY. | |
| config PHY_ROCKCHIP_TYPEC | |
| tristate "Rockchip TYPEC PHY Driver" | |
| depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST) | |
| select EXTCON | |
| select GENERIC_PHY | |
| select RESET_CONTROLLER | |
| help | |
| Enable this to support the Rockchip USB TYPEC PHY. | |
| config PHY_ST_SPEAR1310_MIPHY | |
| tristate "ST SPEAR1310-MIPHY driver" | |
| select GENERIC_PHY | |
| depends on MACH_SPEAR1310 || COMPILE_TEST | |
| help | |
| Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA. | |
| config PHY_ST_SPEAR1340_MIPHY | |
| tristate "ST SPEAR1340-MIPHY driver" | |
| select GENERIC_PHY | |
| depends on MACH_SPEAR1340 || COMPILE_TEST | |
| help | |
| Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA. | |
| config PHY_XGENE | |
| tristate "APM X-Gene 15Gbps PHY support" | |
| depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST) | |
| select GENERIC_PHY | |
| help | |
| This option enables support for APM X-Gene SoC multi-purpose PHY. | |
| config PHY_STIH407_USB | |
| tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family" | |
| depends on RESET_CONTROLLER | |
| depends on ARCH_STI || COMPILE_TEST | |
| select GENERIC_PHY | |
| help | |
| Enable this support to enable the picoPHY device used by USB2 | |
| and USB3 controllers on STMicroelectronics STiH407 SoC families. | |
| config PHY_STIH41X_USB | |
| tristate "STMicroelectronics USB2 PHY driver for STiH41x series" | |
| depends on ARCH_STI | |
| select GENERIC_PHY | |
| help | |
| Enable this to support the USB transceiver that is part of | |
| STMicroelectronics STiH41x SoC series. | |
| config PHY_QCOM_UFS | |
| tristate "Qualcomm UFS PHY driver" | |
| depends on OF && ARCH_QCOM | |
| select GENERIC_PHY | |
| help | |
| Support for UFS PHY on QCOM chipsets. | |
| config PHY_TUSB1210 | |
| tristate "TI TUSB1210 ULPI PHY module" | |
| depends on USB_ULPI_BUS | |
| select GENERIC_PHY | |
| help | |
| Support for TI TUSB1210 USB ULPI PHY. | |
| config PHY_BRCM_SATA | |
| tristate "Broadcom SATA PHY driver" | |
| depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || COMPILE_TEST | |
| depends on OF | |
| select GENERIC_PHY | |
| default ARCH_BCM_IPROC | |
| help | |
| Enable this to support the Broadcom SATA PHY. | |
| If unsure, say N. | |
| config PHY_CYGNUS_PCIE | |
| tristate "Broadcom Cygnus PCIe PHY driver" | |
| depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST) | |
| select GENERIC_PHY | |
| default ARCH_BCM_CYGNUS | |
| help | |
| Enable this to support the Broadcom Cygnus PCIe PHY. | |
| If unsure, say N. | |
| source "drivers/phy/tegra/Kconfig" | |
| config PHY_NS2_PCIE | |
| tristate "Broadcom Northstar2 PCIe PHY driver" | |
| depends on OF && MDIO_BUS_MUX_BCM_IPROC | |
| select GENERIC_PHY | |
| default ARCH_BCM_IPROC | |
| help | |
| Enable this to support the Broadcom Northstar2 PCIe PHY. | |
| If unsure, say N. | |
| endmenu |