| /* | |
| * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 and | |
| * only version 2 as published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| */ | |
| #ifndef UFS_QCOM_PHY_QMP_14NM_H_ | |
| #define UFS_QCOM_PHY_QMP_14NM_H_ | |
| #include "phy-qcom-ufs-i.h" | |
| /* QCOM UFS PHY control registers */ | |
| #define COM_OFF(x) (0x000 + x) | |
| #define PHY_OFF(x) (0xC00 + x) | |
| #define TX_OFF(n, x) (0x400 + (0x400 * n) + x) | |
| #define RX_OFF(n, x) (0x600 + (0x400 * n) + x) | |
| /* UFS PHY QSERDES COM registers */ | |
| #define QSERDES_COM_BG_TIMER COM_OFF(0x0C) | |
| #define QSERDES_COM_BIAS_EN_CLKBUFLR_EN COM_OFF(0x34) | |
| #define QSERDES_COM_SYS_CLK_CTRL COM_OFF(0x3C) | |
| #define QSERDES_COM_LOCK_CMP1_MODE0 COM_OFF(0x4C) | |
| #define QSERDES_COM_LOCK_CMP2_MODE0 COM_OFF(0x50) | |
| #define QSERDES_COM_LOCK_CMP3_MODE0 COM_OFF(0x54) | |
| #define QSERDES_COM_LOCK_CMP1_MODE1 COM_OFF(0x58) | |
| #define QSERDES_COM_LOCK_CMP2_MODE1 COM_OFF(0x5C) | |
| #define QSERDES_COM_LOCK_CMP3_MODE1 COM_OFF(0x60) | |
| #define QSERDES_COM_CP_CTRL_MODE0 COM_OFF(0x78) | |
| #define QSERDES_COM_CP_CTRL_MODE1 COM_OFF(0x7C) | |
| #define QSERDES_COM_PLL_RCTRL_MODE0 COM_OFF(0x84) | |
| #define QSERDES_COM_PLL_RCTRL_MODE1 COM_OFF(0x88) | |
| #define QSERDES_COM_PLL_CCTRL_MODE0 COM_OFF(0x90) | |
| #define QSERDES_COM_PLL_CCTRL_MODE1 COM_OFF(0x94) | |
| #define QSERDES_COM_SYSCLK_EN_SEL COM_OFF(0xAC) | |
| #define QSERDES_COM_RESETSM_CNTRL COM_OFF(0xB4) | |
| #define QSERDES_COM_LOCK_CMP_EN COM_OFF(0xC8) | |
| #define QSERDES_COM_LOCK_CMP_CFG COM_OFF(0xCC) | |
| #define QSERDES_COM_DEC_START_MODE0 COM_OFF(0xD0) | |
| #define QSERDES_COM_DEC_START_MODE1 COM_OFF(0xD4) | |
| #define QSERDES_COM_DIV_FRAC_START1_MODE0 COM_OFF(0xDC) | |
| #define QSERDES_COM_DIV_FRAC_START2_MODE0 COM_OFF(0xE0) | |
| #define QSERDES_COM_DIV_FRAC_START3_MODE0 COM_OFF(0xE4) | |
| #define QSERDES_COM_DIV_FRAC_START1_MODE1 COM_OFF(0xE8) | |
| #define QSERDES_COM_DIV_FRAC_START2_MODE1 COM_OFF(0xEC) | |
| #define QSERDES_COM_DIV_FRAC_START3_MODE1 COM_OFF(0xF0) | |
| #define QSERDES_COM_INTEGLOOP_GAIN0_MODE0 COM_OFF(0x108) | |
| #define QSERDES_COM_INTEGLOOP_GAIN1_MODE0 COM_OFF(0x10C) | |
| #define QSERDES_COM_INTEGLOOP_GAIN0_MODE1 COM_OFF(0x110) | |
| #define QSERDES_COM_INTEGLOOP_GAIN1_MODE1 COM_OFF(0x114) | |
| #define QSERDES_COM_VCO_TUNE_CTRL COM_OFF(0x124) | |
| #define QSERDES_COM_VCO_TUNE_MAP COM_OFF(0x128) | |
| #define QSERDES_COM_VCO_TUNE1_MODE0 COM_OFF(0x12C) | |
| #define QSERDES_COM_VCO_TUNE2_MODE0 COM_OFF(0x130) | |
| #define QSERDES_COM_VCO_TUNE1_MODE1 COM_OFF(0x134) | |
| #define QSERDES_COM_VCO_TUNE2_MODE1 COM_OFF(0x138) | |
| #define QSERDES_COM_VCO_TUNE_TIMER1 COM_OFF(0x144) | |
| #define QSERDES_COM_VCO_TUNE_TIMER2 COM_OFF(0x148) | |
| #define QSERDES_COM_CLK_SELECT COM_OFF(0x174) | |
| #define QSERDES_COM_HSCLK_SEL COM_OFF(0x178) | |
| #define QSERDES_COM_CORECLK_DIV COM_OFF(0x184) | |
| #define QSERDES_COM_CORE_CLK_EN COM_OFF(0x18C) | |
| #define QSERDES_COM_CMN_CONFIG COM_OFF(0x194) | |
| #define QSERDES_COM_SVS_MODE_CLK_SEL COM_OFF(0x19C) | |
| #define QSERDES_COM_CORECLK_DIV_MODE1 COM_OFF(0x1BC) | |
| /* UFS PHY registers */ | |
| #define UFS_PHY_PHY_START PHY_OFF(0x00) | |
| #define UFS_PHY_POWER_DOWN_CONTROL PHY_OFF(0x04) | |
| #define UFS_PHY_PCS_READY_STATUS PHY_OFF(0x168) | |
| /* UFS PHY TX registers */ | |
| #define QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN TX_OFF(0, 0x68) | |
| #define QSERDES_TX_LANE_MODE TX_OFF(0, 0x94) | |
| /* UFS PHY RX registers */ | |
| #define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN RX_OFF(0, 0x40) | |
| #define QSERDES_RX_RX_TERM_BW RX_OFF(0, 0x90) | |
| #define QSERDES_RX_RX_EQ_GAIN1_LSB RX_OFF(0, 0xC4) | |
| #define QSERDES_RX_RX_EQ_GAIN1_MSB RX_OFF(0, 0xC8) | |
| #define QSERDES_RX_RX_EQ_GAIN2_LSB RX_OFF(0, 0xCC) | |
| #define QSERDES_RX_RX_EQ_GAIN2_MSB RX_OFF(0, 0xD0) | |
| #define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2 RX_OFF(0, 0xD8) | |
| #define QSERDES_RX_SIGDET_CNTRL RX_OFF(0, 0x114) | |
| #define QSERDES_RX_SIGDET_LVL RX_OFF(0, 0x118) | |
| #define QSERDES_RX_SIGDET_DEGLITCH_CNTRL RX_OFF(0, 0x11C) | |
| #define QSERDES_RX_RX_INTERFACE_MODE RX_OFF(0, 0x12C) | |
| /* | |
| * This structure represents the 14nm specific phy. | |
| * common_cfg MUST remain the first field in this structure | |
| * in case extra fields are added. This way, when calling | |
| * get_ufs_qcom_phy() of generic phy, we can extract the | |
| * common phy structure (struct ufs_qcom_phy) out of it | |
| * regardless of the relevant specific phy. | |
| */ | |
| struct ufs_qcom_phy_qmp_14nm { | |
| struct ufs_qcom_phy common_cfg; | |
| }; | |
| static struct ufs_qcom_phy_calibration phy_cal_table_rate_A[] = { | |
| UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CMN_CONFIG, 0x0e), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL, 0xd7), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CLK_SELECT, 0x30), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYS_CLK_CTRL, 0x06), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BG_TIMER, 0x0a), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_HSCLK_SEL, 0x05), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV, 0x0a), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_EN, 0x01), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_CTRL, 0x10), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x20), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORE_CLK_EN, 0x00), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_CFG, 0x00), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER1, 0xff), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x14), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE0, 0x82), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE0, 0x0b), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE0, 0x16), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE0, 0x28), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE0, 0x28), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE0, 0x02), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE0, 0xff), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE0, 0x00), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE1, 0x98), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE1, 0x0b), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE1, 0x16), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE1, 0x28), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE1, 0x00), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE1, 0x32), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE1, 0x00), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN, 0x45), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE, 0x02), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_LVL, 0x24), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_CNTRL, 0x02), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_INTERFACE_MODE, 0x00), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x18), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_TERM_BW, 0x5B), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xFF), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3F), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xFF), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x0F), | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0E), | |
| }; | |
| static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = { | |
| UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x54), | |
| }; | |
| #endif |