| /* | |
| * Copyright (C) 2014-2015 Broadcom Corporation | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation version 2. | |
| * | |
| * This program is distributed "as is" WITHOUT ANY WARRANTY of any | |
| * kind, whether express or implied; without even the implied warranty | |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * This file contains the Broadcom Iproc GPIO driver that supports 3 | |
| * GPIO controllers on Iproc including the ASIU GPIO controller, the | |
| * chipCommonG GPIO controller, and the always-on GPIO controller. Basic | |
| * PINCONF such as bias pull up/down, and drive strength are also supported | |
| * in this driver. | |
| * | |
| * It provides the functionality where pins from the GPIO can be | |
| * individually muxed to GPIO function, if individual pad | |
| * configuration is supported, through the interaction with respective | |
| * SoCs IOMUX controller. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/slab.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/io.h> | |
| #include <linux/gpio/driver.h> | |
| #include <linux/ioport.h> | |
| #include <linux/of_device.h> | |
| #include <linux/of_irq.h> | |
| #include <linux/pinctrl/pinctrl.h> | |
| #include <linux/pinctrl/pinconf.h> | |
| #include <linux/pinctrl/pinconf-generic.h> | |
| #include "../pinctrl-utils.h" | |
| #define IPROC_GPIO_DATA_IN_OFFSET 0x00 | |
| #define IPROC_GPIO_DATA_OUT_OFFSET 0x04 | |
| #define IPROC_GPIO_OUT_EN_OFFSET 0x08 | |
| #define IPROC_GPIO_INT_TYPE_OFFSET 0x0c | |
| #define IPROC_GPIO_INT_DE_OFFSET 0x10 | |
| #define IPROC_GPIO_INT_EDGE_OFFSET 0x14 | |
| #define IPROC_GPIO_INT_MSK_OFFSET 0x18 | |
| #define IPROC_GPIO_INT_STAT_OFFSET 0x1c | |
| #define IPROC_GPIO_INT_MSTAT_OFFSET 0x20 | |
| #define IPROC_GPIO_INT_CLR_OFFSET 0x24 | |
| #define IPROC_GPIO_PAD_RES_OFFSET 0x34 | |
| #define IPROC_GPIO_RES_EN_OFFSET 0x38 | |
| /* drive strength control for ASIU GPIO */ | |
| #define IPROC_GPIO_ASIU_DRV0_CTRL_OFFSET 0x58 | |
| /* drive strength control for CCM/CRMU (AON) GPIO */ | |
| #define IPROC_GPIO_DRV0_CTRL_OFFSET 0x00 | |
| #define GPIO_BANK_SIZE 0x200 | |
| #define NGPIOS_PER_BANK 32 | |
| #define GPIO_BANK(pin) ((pin) / NGPIOS_PER_BANK) | |
| #define IPROC_GPIO_REG(pin, reg) (GPIO_BANK(pin) * GPIO_BANK_SIZE + (reg)) | |
| #define IPROC_GPIO_SHIFT(pin) ((pin) % NGPIOS_PER_BANK) | |
| #define GPIO_DRV_STRENGTH_BIT_SHIFT 20 | |
| #define GPIO_DRV_STRENGTH_BITS 3 | |
| #define GPIO_DRV_STRENGTH_BIT_MASK ((1 << GPIO_DRV_STRENGTH_BITS) - 1) | |
| enum iproc_pinconf_param { | |
| IPROC_PINCONF_DRIVE_STRENGTH = 0, | |
| IPROC_PINCONF_BIAS_DISABLE, | |
| IPROC_PINCONF_BIAS_PULL_UP, | |
| IPROC_PINCONF_BIAS_PULL_DOWN, | |
| IPROC_PINCON_MAX, | |
| }; | |
| /* | |
| * Iproc GPIO core | |
| * | |
| * @dev: pointer to device | |
| * @base: I/O register base for Iproc GPIO controller | |
| * @io_ctrl: I/O register base for certain type of Iproc GPIO controller that | |
| * has the PINCONF support implemented outside of the GPIO block | |
| * @lock: lock to protect access to I/O registers | |
| * @gc: GPIO chip | |
| * @num_banks: number of GPIO banks, each bank supports up to 32 GPIOs | |
| * @pinmux_is_supported: flag to indicate this GPIO controller contains pins | |
| * that can be individually muxed to GPIO | |
| * @pinconf_disable: contains a list of PINCONF parameters that need to be | |
| * disabled | |
| * @nr_pinconf_disable: total number of PINCONF parameters that need to be | |
| * disabled | |
| * @pctl: pointer to pinctrl_dev | |
| * @pctldesc: pinctrl descriptor | |
| */ | |
| struct iproc_gpio { | |
| struct device *dev; | |
| void __iomem *base; | |
| void __iomem *io_ctrl; | |
| spinlock_t lock; | |
| struct gpio_chip gc; | |
| unsigned num_banks; | |
| bool pinmux_is_supported; | |
| enum pin_config_param *pinconf_disable; | |
| unsigned int nr_pinconf_disable; | |
| struct pinctrl_dev *pctl; | |
| struct pinctrl_desc pctldesc; | |
| }; | |
| /* | |
| * Mapping from PINCONF pins to GPIO pins is 1-to-1 | |
| */ | |
| static inline unsigned iproc_pin_to_gpio(unsigned pin) | |
| { | |
| return pin; | |
| } | |
| /** | |
| * iproc_set_bit - set or clear one bit (corresponding to the GPIO pin) in a | |
| * Iproc GPIO register | |
| * | |
| * @iproc_gpio: Iproc GPIO device | |
| * @reg: register offset | |
| * @gpio: GPIO pin | |
| * @set: set or clear | |
| */ | |
| static inline void iproc_set_bit(struct iproc_gpio *chip, unsigned int reg, | |
| unsigned gpio, bool set) | |
| { | |
| unsigned int offset = IPROC_GPIO_REG(gpio, reg); | |
| unsigned int shift = IPROC_GPIO_SHIFT(gpio); | |
| u32 val; | |
| val = readl(chip->base + offset); | |
| if (set) | |
| val |= BIT(shift); | |
| else | |
| val &= ~BIT(shift); | |
| writel(val, chip->base + offset); | |
| } | |
| static inline bool iproc_get_bit(struct iproc_gpio *chip, unsigned int reg, | |
| unsigned gpio) | |
| { | |
| unsigned int offset = IPROC_GPIO_REG(gpio, reg); | |
| unsigned int shift = IPROC_GPIO_SHIFT(gpio); | |
| return !!(readl(chip->base + offset) & BIT(shift)); | |
| } | |
| static void iproc_gpio_irq_handler(struct irq_desc *desc) | |
| { | |
| struct gpio_chip *gc = irq_desc_get_handler_data(desc); | |
| struct iproc_gpio *chip = gpiochip_get_data(gc); | |
| struct irq_chip *irq_chip = irq_desc_get_chip(desc); | |
| int i, bit; | |
| chained_irq_enter(irq_chip, desc); | |
| /* go through the entire GPIO banks and handle all interrupts */ | |
| for (i = 0; i < chip->num_banks; i++) { | |
| unsigned long val = readl(chip->base + (i * GPIO_BANK_SIZE) + | |
| IPROC_GPIO_INT_MSTAT_OFFSET); | |
| for_each_set_bit(bit, &val, NGPIOS_PER_BANK) { | |
| unsigned pin = NGPIOS_PER_BANK * i + bit; | |
| int child_irq = irq_find_mapping(gc->irqdomain, pin); | |
| /* | |
| * Clear the interrupt before invoking the | |
| * handler, so we do not leave any window | |
| */ | |
| writel(BIT(bit), chip->base + (i * GPIO_BANK_SIZE) + | |
| IPROC_GPIO_INT_CLR_OFFSET); | |
| generic_handle_irq(child_irq); | |
| } | |
| } | |
| chained_irq_exit(irq_chip, desc); | |
| } | |
| static void iproc_gpio_irq_ack(struct irq_data *d) | |
| { | |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); | |
| struct iproc_gpio *chip = gpiochip_get_data(gc); | |
| unsigned gpio = d->hwirq; | |
| unsigned int offset = IPROC_GPIO_REG(gpio, | |
| IPROC_GPIO_INT_CLR_OFFSET); | |
| unsigned int shift = IPROC_GPIO_SHIFT(gpio); | |
| u32 val = BIT(shift); | |
| writel(val, chip->base + offset); | |
| } | |
| /** | |
| * iproc_gpio_irq_set_mask - mask/unmask a GPIO interrupt | |
| * | |
| * @d: IRQ chip data | |
| * @unmask: mask/unmask GPIO interrupt | |
| */ | |
| static void iproc_gpio_irq_set_mask(struct irq_data *d, bool unmask) | |
| { | |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); | |
| struct iproc_gpio *chip = gpiochip_get_data(gc); | |
| unsigned gpio = d->hwirq; | |
| iproc_set_bit(chip, IPROC_GPIO_INT_MSK_OFFSET, gpio, unmask); | |
| } | |
| static void iproc_gpio_irq_mask(struct irq_data *d) | |
| { | |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); | |
| struct iproc_gpio *chip = gpiochip_get_data(gc); | |
| unsigned long flags; | |
| spin_lock_irqsave(&chip->lock, flags); | |
| iproc_gpio_irq_set_mask(d, false); | |
| spin_unlock_irqrestore(&chip->lock, flags); | |
| } | |
| static void iproc_gpio_irq_unmask(struct irq_data *d) | |
| { | |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); | |
| struct iproc_gpio *chip = gpiochip_get_data(gc); | |
| unsigned long flags; | |
| spin_lock_irqsave(&chip->lock, flags); | |
| iproc_gpio_irq_set_mask(d, true); | |
| spin_unlock_irqrestore(&chip->lock, flags); | |
| } | |
| static int iproc_gpio_irq_set_type(struct irq_data *d, unsigned int type) | |
| { | |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); | |
| struct iproc_gpio *chip = gpiochip_get_data(gc); | |
| unsigned gpio = d->hwirq; | |
| bool level_triggered = false; | |
| bool dual_edge = false; | |
| bool rising_or_high = false; | |
| unsigned long flags; | |
| switch (type & IRQ_TYPE_SENSE_MASK) { | |
| case IRQ_TYPE_EDGE_RISING: | |
| rising_or_high = true; | |
| break; | |
| case IRQ_TYPE_EDGE_FALLING: | |
| break; | |
| case IRQ_TYPE_EDGE_BOTH: | |
| dual_edge = true; | |
| break; | |
| case IRQ_TYPE_LEVEL_HIGH: | |
| level_triggered = true; | |
| rising_or_high = true; | |
| break; | |
| case IRQ_TYPE_LEVEL_LOW: | |
| level_triggered = true; | |
| break; | |
| default: | |
| dev_err(chip->dev, "invalid GPIO IRQ type 0x%x\n", | |
| type); | |
| return -EINVAL; | |
| } | |
| spin_lock_irqsave(&chip->lock, flags); | |
| iproc_set_bit(chip, IPROC_GPIO_INT_TYPE_OFFSET, gpio, | |
| level_triggered); | |
| iproc_set_bit(chip, IPROC_GPIO_INT_DE_OFFSET, gpio, dual_edge); | |
| iproc_set_bit(chip, IPROC_GPIO_INT_EDGE_OFFSET, gpio, | |
| rising_or_high); | |
| spin_unlock_irqrestore(&chip->lock, flags); | |
| dev_dbg(chip->dev, | |
| "gpio:%u level_triggered:%d dual_edge:%d rising_or_high:%d\n", | |
| gpio, level_triggered, dual_edge, rising_or_high); | |
| return 0; | |
| } | |
| static struct irq_chip iproc_gpio_irq_chip = { | |
| .name = "bcm-iproc-gpio", | |
| .irq_ack = iproc_gpio_irq_ack, | |
| .irq_mask = iproc_gpio_irq_mask, | |
| .irq_unmask = iproc_gpio_irq_unmask, | |
| .irq_set_type = iproc_gpio_irq_set_type, | |
| }; | |
| /* | |
| * Request the Iproc IOMUX pinmux controller to mux individual pins to GPIO | |
| */ | |
| static int iproc_gpio_request(struct gpio_chip *gc, unsigned offset) | |
| { | |
| struct iproc_gpio *chip = gpiochip_get_data(gc); | |
| unsigned gpio = gc->base + offset; | |
| /* not all Iproc GPIO pins can be muxed individually */ | |
| if (!chip->pinmux_is_supported) | |
| return 0; | |
| return pinctrl_request_gpio(gpio); | |
| } | |
| static void iproc_gpio_free(struct gpio_chip *gc, unsigned offset) | |
| { | |
| struct iproc_gpio *chip = gpiochip_get_data(gc); | |
| unsigned gpio = gc->base + offset; | |
| if (!chip->pinmux_is_supported) | |
| return; | |
| pinctrl_free_gpio(gpio); | |
| } | |
| static int iproc_gpio_direction_input(struct gpio_chip *gc, unsigned gpio) | |
| { | |
| struct iproc_gpio *chip = gpiochip_get_data(gc); | |
| unsigned long flags; | |
| spin_lock_irqsave(&chip->lock, flags); | |
| iproc_set_bit(chip, IPROC_GPIO_OUT_EN_OFFSET, gpio, false); | |
| spin_unlock_irqrestore(&chip->lock, flags); | |
| dev_dbg(chip->dev, "gpio:%u set input\n", gpio); | |
| return 0; | |
| } | |
| static int iproc_gpio_direction_output(struct gpio_chip *gc, unsigned gpio, | |
| int val) | |
| { | |
| struct iproc_gpio *chip = gpiochip_get_data(gc); | |
| unsigned long flags; | |
| spin_lock_irqsave(&chip->lock, flags); | |
| iproc_set_bit(chip, IPROC_GPIO_OUT_EN_OFFSET, gpio, true); | |
| iproc_set_bit(chip, IPROC_GPIO_DATA_OUT_OFFSET, gpio, !!(val)); | |
| spin_unlock_irqrestore(&chip->lock, flags); | |
| dev_dbg(chip->dev, "gpio:%u set output, value:%d\n", gpio, val); | |
| return 0; | |
| } | |
| static void iproc_gpio_set(struct gpio_chip *gc, unsigned gpio, int val) | |
| { | |
| struct iproc_gpio *chip = gpiochip_get_data(gc); | |
| unsigned long flags; | |
| spin_lock_irqsave(&chip->lock, flags); | |
| iproc_set_bit(chip, IPROC_GPIO_DATA_OUT_OFFSET, gpio, !!(val)); | |
| spin_unlock_irqrestore(&chip->lock, flags); | |
| dev_dbg(chip->dev, "gpio:%u set, value:%d\n", gpio, val); | |
| } | |
| static int iproc_gpio_get(struct gpio_chip *gc, unsigned gpio) | |
| { | |
| struct iproc_gpio *chip = gpiochip_get_data(gc); | |
| unsigned int offset = IPROC_GPIO_REG(gpio, | |
| IPROC_GPIO_DATA_IN_OFFSET); | |
| unsigned int shift = IPROC_GPIO_SHIFT(gpio); | |
| return !!(readl(chip->base + offset) & BIT(shift)); | |
| } | |
| /* | |
| * Mapping of the iProc PINCONF parameters to the generic pin configuration | |
| * parameters | |
| */ | |
| static const enum pin_config_param iproc_pinconf_disable_map[] = { | |
| [IPROC_PINCONF_DRIVE_STRENGTH] = PIN_CONFIG_DRIVE_STRENGTH, | |
| [IPROC_PINCONF_BIAS_DISABLE] = PIN_CONFIG_BIAS_DISABLE, | |
| [IPROC_PINCONF_BIAS_PULL_UP] = PIN_CONFIG_BIAS_PULL_UP, | |
| [IPROC_PINCONF_BIAS_PULL_DOWN] = PIN_CONFIG_BIAS_PULL_DOWN, | |
| }; | |
| static bool iproc_pinconf_param_is_disabled(struct iproc_gpio *chip, | |
| enum pin_config_param param) | |
| { | |
| unsigned int i; | |
| if (!chip->nr_pinconf_disable) | |
| return false; | |
| for (i = 0; i < chip->nr_pinconf_disable; i++) | |
| if (chip->pinconf_disable[i] == param) | |
| return true; | |
| return false; | |
| } | |
| static int iproc_pinconf_disable_map_create(struct iproc_gpio *chip, | |
| unsigned long disable_mask) | |
| { | |
| unsigned int map_size = ARRAY_SIZE(iproc_pinconf_disable_map); | |
| unsigned int bit, nbits = 0; | |
| /* figure out total number of PINCONF parameters to disable */ | |
| for_each_set_bit(bit, &disable_mask, map_size) | |
| nbits++; | |
| if (!nbits) | |
| return 0; | |
| /* | |
| * Allocate an array to store PINCONF parameters that need to be | |
| * disabled | |
| */ | |
| chip->pinconf_disable = devm_kcalloc(chip->dev, nbits, | |
| sizeof(*chip->pinconf_disable), | |
| GFP_KERNEL); | |
| if (!chip->pinconf_disable) | |
| return -ENOMEM; | |
| chip->nr_pinconf_disable = nbits; | |
| /* now store these parameters */ | |
| nbits = 0; | |
| for_each_set_bit(bit, &disable_mask, map_size) | |
| chip->pinconf_disable[nbits++] = iproc_pinconf_disable_map[bit]; | |
| return 0; | |
| } | |
| static int iproc_get_groups_count(struct pinctrl_dev *pctldev) | |
| { | |
| return 1; | |
| } | |
| /* | |
| * Only one group: "gpio_grp", since this local pinctrl device only performs | |
| * GPIO specific PINCONF configurations | |
| */ | |
| static const char *iproc_get_group_name(struct pinctrl_dev *pctldev, | |
| unsigned selector) | |
| { | |
| return "gpio_grp"; | |
| } | |
| static const struct pinctrl_ops iproc_pctrl_ops = { | |
| .get_groups_count = iproc_get_groups_count, | |
| .get_group_name = iproc_get_group_name, | |
| .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, | |
| .dt_free_map = pinctrl_utils_free_map, | |
| }; | |
| static int iproc_gpio_set_pull(struct iproc_gpio *chip, unsigned gpio, | |
| bool disable, bool pull_up) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&chip->lock, flags); | |
| if (disable) { | |
| iproc_set_bit(chip, IPROC_GPIO_RES_EN_OFFSET, gpio, false); | |
| } else { | |
| iproc_set_bit(chip, IPROC_GPIO_PAD_RES_OFFSET, gpio, | |
| pull_up); | |
| iproc_set_bit(chip, IPROC_GPIO_RES_EN_OFFSET, gpio, true); | |
| } | |
| spin_unlock_irqrestore(&chip->lock, flags); | |
| dev_dbg(chip->dev, "gpio:%u set pullup:%d\n", gpio, pull_up); | |
| return 0; | |
| } | |
| static void iproc_gpio_get_pull(struct iproc_gpio *chip, unsigned gpio, | |
| bool *disable, bool *pull_up) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&chip->lock, flags); | |
| *disable = !iproc_get_bit(chip, IPROC_GPIO_RES_EN_OFFSET, gpio); | |
| *pull_up = iproc_get_bit(chip, IPROC_GPIO_PAD_RES_OFFSET, gpio); | |
| spin_unlock_irqrestore(&chip->lock, flags); | |
| } | |
| static int iproc_gpio_set_strength(struct iproc_gpio *chip, unsigned gpio, | |
| unsigned strength) | |
| { | |
| void __iomem *base; | |
| unsigned int i, offset, shift; | |
| u32 val; | |
| unsigned long flags; | |
| /* make sure drive strength is supported */ | |
| if (strength < 2 || strength > 16 || (strength % 2)) | |
| return -ENOTSUPP; | |
| if (chip->io_ctrl) { | |
| base = chip->io_ctrl; | |
| offset = IPROC_GPIO_DRV0_CTRL_OFFSET; | |
| } else { | |
| base = chip->base; | |
| offset = IPROC_GPIO_REG(gpio, | |
| IPROC_GPIO_ASIU_DRV0_CTRL_OFFSET); | |
| } | |
| shift = IPROC_GPIO_SHIFT(gpio); | |
| dev_dbg(chip->dev, "gpio:%u set drive strength:%d mA\n", gpio, | |
| strength); | |
| spin_lock_irqsave(&chip->lock, flags); | |
| strength = (strength / 2) - 1; | |
| for (i = 0; i < GPIO_DRV_STRENGTH_BITS; i++) { | |
| val = readl(base + offset); | |
| val &= ~BIT(shift); | |
| val |= ((strength >> i) & 0x1) << shift; | |
| writel(val, base + offset); | |
| offset += 4; | |
| } | |
| spin_unlock_irqrestore(&chip->lock, flags); | |
| return 0; | |
| } | |
| static int iproc_gpio_get_strength(struct iproc_gpio *chip, unsigned gpio, | |
| u16 *strength) | |
| { | |
| void __iomem *base; | |
| unsigned int i, offset, shift; | |
| u32 val; | |
| unsigned long flags; | |
| if (chip->io_ctrl) { | |
| base = chip->io_ctrl; | |
| offset = IPROC_GPIO_DRV0_CTRL_OFFSET; | |
| } else { | |
| base = chip->base; | |
| offset = IPROC_GPIO_REG(gpio, | |
| IPROC_GPIO_ASIU_DRV0_CTRL_OFFSET); | |
| } | |
| shift = IPROC_GPIO_SHIFT(gpio); | |
| spin_lock_irqsave(&chip->lock, flags); | |
| *strength = 0; | |
| for (i = 0; i < GPIO_DRV_STRENGTH_BITS; i++) { | |
| val = readl(base + offset) & BIT(shift); | |
| val >>= shift; | |
| *strength += (val << i); | |
| offset += 4; | |
| } | |
| /* convert to mA */ | |
| *strength = (*strength + 1) * 2; | |
| spin_unlock_irqrestore(&chip->lock, flags); | |
| return 0; | |
| } | |
| static int iproc_pin_config_get(struct pinctrl_dev *pctldev, unsigned pin, | |
| unsigned long *config) | |
| { | |
| struct iproc_gpio *chip = pinctrl_dev_get_drvdata(pctldev); | |
| enum pin_config_param param = pinconf_to_config_param(*config); | |
| unsigned gpio = iproc_pin_to_gpio(pin); | |
| u16 arg; | |
| bool disable, pull_up; | |
| int ret; | |
| if (iproc_pinconf_param_is_disabled(chip, param)) | |
| return -ENOTSUPP; | |
| switch (param) { | |
| case PIN_CONFIG_BIAS_DISABLE: | |
| iproc_gpio_get_pull(chip, gpio, &disable, &pull_up); | |
| if (disable) | |
| return 0; | |
| else | |
| return -EINVAL; | |
| case PIN_CONFIG_BIAS_PULL_UP: | |
| iproc_gpio_get_pull(chip, gpio, &disable, &pull_up); | |
| if (!disable && pull_up) | |
| return 0; | |
| else | |
| return -EINVAL; | |
| case PIN_CONFIG_BIAS_PULL_DOWN: | |
| iproc_gpio_get_pull(chip, gpio, &disable, &pull_up); | |
| if (!disable && !pull_up) | |
| return 0; | |
| else | |
| return -EINVAL; | |
| case PIN_CONFIG_DRIVE_STRENGTH: | |
| ret = iproc_gpio_get_strength(chip, gpio, &arg); | |
| if (ret) | |
| return ret; | |
| *config = pinconf_to_config_packed(param, arg); | |
| return 0; | |
| default: | |
| return -ENOTSUPP; | |
| } | |
| return -ENOTSUPP; | |
| } | |
| static int iproc_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin, | |
| unsigned long *configs, unsigned num_configs) | |
| { | |
| struct iproc_gpio *chip = pinctrl_dev_get_drvdata(pctldev); | |
| enum pin_config_param param; | |
| u16 arg; | |
| unsigned i, gpio = iproc_pin_to_gpio(pin); | |
| int ret = -ENOTSUPP; | |
| for (i = 0; i < num_configs; i++) { | |
| param = pinconf_to_config_param(configs[i]); | |
| if (iproc_pinconf_param_is_disabled(chip, param)) | |
| return -ENOTSUPP; | |
| arg = pinconf_to_config_argument(configs[i]); | |
| switch (param) { | |
| case PIN_CONFIG_BIAS_DISABLE: | |
| ret = iproc_gpio_set_pull(chip, gpio, true, false); | |
| if (ret < 0) | |
| goto out; | |
| break; | |
| case PIN_CONFIG_BIAS_PULL_UP: | |
| ret = iproc_gpio_set_pull(chip, gpio, false, true); | |
| if (ret < 0) | |
| goto out; | |
| break; | |
| case PIN_CONFIG_BIAS_PULL_DOWN: | |
| ret = iproc_gpio_set_pull(chip, gpio, false, false); | |
| if (ret < 0) | |
| goto out; | |
| break; | |
| case PIN_CONFIG_DRIVE_STRENGTH: | |
| ret = iproc_gpio_set_strength(chip, gpio, arg); | |
| if (ret < 0) | |
| goto out; | |
| break; | |
| default: | |
| dev_err(chip->dev, "invalid configuration\n"); | |
| return -ENOTSUPP; | |
| } | |
| } /* for each config */ | |
| out: | |
| return ret; | |
| } | |
| static const struct pinconf_ops iproc_pconf_ops = { | |
| .is_generic = true, | |
| .pin_config_get = iproc_pin_config_get, | |
| .pin_config_set = iproc_pin_config_set, | |
| }; | |
| /* | |
| * Iproc GPIO controller supports some PINCONF related configurations such as | |
| * pull up, pull down, and drive strength, when the pin is configured to GPIO | |
| * | |
| * Here a local pinctrl device is created with simple 1-to-1 pin mapping to the | |
| * local GPIO pins | |
| */ | |
| static int iproc_gpio_register_pinconf(struct iproc_gpio *chip) | |
| { | |
| struct pinctrl_desc *pctldesc = &chip->pctldesc; | |
| struct pinctrl_pin_desc *pins; | |
| struct gpio_chip *gc = &chip->gc; | |
| int i; | |
| pins = devm_kcalloc(chip->dev, gc->ngpio, sizeof(*pins), GFP_KERNEL); | |
| if (!pins) | |
| return -ENOMEM; | |
| for (i = 0; i < gc->ngpio; i++) { | |
| pins[i].number = i; | |
| pins[i].name = devm_kasprintf(chip->dev, GFP_KERNEL, | |
| "gpio-%d", i); | |
| if (!pins[i].name) | |
| return -ENOMEM; | |
| } | |
| pctldesc->name = dev_name(chip->dev); | |
| pctldesc->pctlops = &iproc_pctrl_ops; | |
| pctldesc->pins = pins; | |
| pctldesc->npins = gc->ngpio; | |
| pctldesc->confops = &iproc_pconf_ops; | |
| chip->pctl = devm_pinctrl_register(chip->dev, pctldesc, chip); | |
| if (IS_ERR(chip->pctl)) { | |
| dev_err(chip->dev, "unable to register pinctrl device\n"); | |
| return PTR_ERR(chip->pctl); | |
| } | |
| return 0; | |
| } | |
| static const struct of_device_id iproc_gpio_of_match[] = { | |
| { .compatible = "brcm,iproc-gpio" }, | |
| { .compatible = "brcm,cygnus-ccm-gpio" }, | |
| { .compatible = "brcm,cygnus-asiu-gpio" }, | |
| { .compatible = "brcm,cygnus-crmu-gpio" }, | |
| { .compatible = "brcm,iproc-nsp-gpio" }, | |
| { .compatible = "brcm,iproc-stingray-gpio" }, | |
| { /* sentinel */ } | |
| }; | |
| static int iproc_gpio_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct resource *res; | |
| struct iproc_gpio *chip; | |
| struct gpio_chip *gc; | |
| u32 ngpios, pinconf_disable_mask = 0; | |
| int irq, ret; | |
| bool no_pinconf = false; | |
| /* NSP does not support drive strength config */ | |
| if (of_device_is_compatible(dev->of_node, "brcm,iproc-nsp-gpio")) | |
| pinconf_disable_mask = BIT(IPROC_PINCONF_DRIVE_STRENGTH); | |
| /* Stingray does not support pinconf in this controller */ | |
| else if (of_device_is_compatible(dev->of_node, | |
| "brcm,iproc-stingray-gpio")) | |
| no_pinconf = true; | |
| chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL); | |
| if (!chip) | |
| return -ENOMEM; | |
| chip->dev = dev; | |
| platform_set_drvdata(pdev, chip); | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| chip->base = devm_ioremap_resource(dev, res); | |
| if (IS_ERR(chip->base)) { | |
| dev_err(dev, "unable to map I/O memory\n"); | |
| return PTR_ERR(chip->base); | |
| } | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 1); | |
| if (res) { | |
| chip->io_ctrl = devm_ioremap_resource(dev, res); | |
| if (IS_ERR(chip->io_ctrl)) { | |
| dev_err(dev, "unable to map I/O memory\n"); | |
| return PTR_ERR(chip->io_ctrl); | |
| } | |
| } | |
| if (of_property_read_u32(dev->of_node, "ngpios", &ngpios)) { | |
| dev_err(&pdev->dev, "missing ngpios DT property\n"); | |
| return -ENODEV; | |
| } | |
| spin_lock_init(&chip->lock); | |
| gc = &chip->gc; | |
| gc->base = -1; | |
| gc->ngpio = ngpios; | |
| chip->num_banks = (ngpios + NGPIOS_PER_BANK - 1) / NGPIOS_PER_BANK; | |
| gc->label = dev_name(dev); | |
| gc->parent = dev; | |
| gc->of_node = dev->of_node; | |
| gc->request = iproc_gpio_request; | |
| gc->free = iproc_gpio_free; | |
| gc->direction_input = iproc_gpio_direction_input; | |
| gc->direction_output = iproc_gpio_direction_output; | |
| gc->set = iproc_gpio_set; | |
| gc->get = iproc_gpio_get; | |
| chip->pinmux_is_supported = of_property_read_bool(dev->of_node, | |
| "gpio-ranges"); | |
| ret = gpiochip_add_data(gc, chip); | |
| if (ret < 0) { | |
| dev_err(dev, "unable to add GPIO chip\n"); | |
| return ret; | |
| } | |
| if (!no_pinconf) { | |
| ret = iproc_gpio_register_pinconf(chip); | |
| if (ret) { | |
| dev_err(dev, "unable to register pinconf\n"); | |
| goto err_rm_gpiochip; | |
| } | |
| if (pinconf_disable_mask) { | |
| ret = iproc_pinconf_disable_map_create(chip, | |
| pinconf_disable_mask); | |
| if (ret) { | |
| dev_err(dev, | |
| "unable to create pinconf disable map\n"); | |
| goto err_rm_gpiochip; | |
| } | |
| } | |
| } | |
| /* optional GPIO interrupt support */ | |
| irq = platform_get_irq(pdev, 0); | |
| if (irq) { | |
| ret = gpiochip_irqchip_add(gc, &iproc_gpio_irq_chip, 0, | |
| handle_simple_irq, IRQ_TYPE_NONE); | |
| if (ret) { | |
| dev_err(dev, "no GPIO irqchip\n"); | |
| goto err_rm_gpiochip; | |
| } | |
| gpiochip_set_chained_irqchip(gc, &iproc_gpio_irq_chip, irq, | |
| iproc_gpio_irq_handler); | |
| } | |
| return 0; | |
| err_rm_gpiochip: | |
| gpiochip_remove(gc); | |
| return ret; | |
| } | |
| static struct platform_driver iproc_gpio_driver = { | |
| .driver = { | |
| .name = "iproc-gpio", | |
| .of_match_table = iproc_gpio_of_match, | |
| }, | |
| .probe = iproc_gpio_probe, | |
| }; | |
| static int __init iproc_gpio_init(void) | |
| { | |
| return platform_driver_register(&iproc_gpio_driver); | |
| } | |
| arch_initcall_sync(iproc_gpio_init); |