| #ifndef PINCTRL_PINCTRL_NOMADIK_H | |
| #define PINCTRL_PINCTRL_NOMADIK_H | |
| /* Package definitions */ | |
| #define PINCTRL_NMK_STN8815 0 | |
| #define PINCTRL_NMK_DB8500 1 | |
| #define PINCTRL_NMK_DB8540 2 | |
| /* Alternate functions: function C is set in hw by setting both A and B */ | |
| #define NMK_GPIO_ALT_GPIO 0 | |
| #define NMK_GPIO_ALT_A 1 | |
| #define NMK_GPIO_ALT_B 2 | |
| #define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B) | |
| #define NMK_GPIO_ALT_CX_SHIFT 2 | |
| #define NMK_GPIO_ALT_C1 ((1<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) | |
| #define NMK_GPIO_ALT_C2 ((2<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) | |
| #define NMK_GPIO_ALT_C3 ((3<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) | |
| #define NMK_GPIO_ALT_C4 ((4<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) | |
| #define PRCM_GPIOCR_ALTCX(pin_num,\ | |
| altc1_used, altc1_ri, altc1_cb,\ | |
| altc2_used, altc2_ri, altc2_cb,\ | |
| altc3_used, altc3_ri, altc3_cb,\ | |
| altc4_used, altc4_ri, altc4_cb)\ | |
| {\ | |
| .pin = pin_num,\ | |
| .altcx[PRCM_IDX_GPIOCR_ALTC1] = {\ | |
| .used = altc1_used,\ | |
| .reg_index = altc1_ri,\ | |
| .control_bit = altc1_cb\ | |
| },\ | |
| .altcx[PRCM_IDX_GPIOCR_ALTC2] = {\ | |
| .used = altc2_used,\ | |
| .reg_index = altc2_ri,\ | |
| .control_bit = altc2_cb\ | |
| },\ | |
| .altcx[PRCM_IDX_GPIOCR_ALTC3] = {\ | |
| .used = altc3_used,\ | |
| .reg_index = altc3_ri,\ | |
| .control_bit = altc3_cb\ | |
| },\ | |
| .altcx[PRCM_IDX_GPIOCR_ALTC4] = {\ | |
| .used = altc4_used,\ | |
| .reg_index = altc4_ri,\ | |
| .control_bit = altc4_cb\ | |
| },\ | |
| } | |
| /** | |
| * enum prcm_gpiocr_reg_index | |
| * Used to reference an PRCM GPIOCR register address. | |
| */ | |
| enum prcm_gpiocr_reg_index { | |
| PRCM_IDX_GPIOCR1, | |
| PRCM_IDX_GPIOCR2, | |
| PRCM_IDX_GPIOCR3 | |
| }; | |
| /** | |
| * enum prcm_gpiocr_altcx_index | |
| * Used to reference an Other alternate-C function. | |
| */ | |
| enum prcm_gpiocr_altcx_index { | |
| PRCM_IDX_GPIOCR_ALTC1, | |
| PRCM_IDX_GPIOCR_ALTC2, | |
| PRCM_IDX_GPIOCR_ALTC3, | |
| PRCM_IDX_GPIOCR_ALTC4, | |
| PRCM_IDX_GPIOCR_ALTC_MAX, | |
| }; | |
| /** | |
| * struct prcm_gpio_altcx - Other alternate-C function | |
| * @used: other alternate-C function availability | |
| * @reg_index: PRCM GPIOCR register index used to control the function | |
| * @control_bit: PRCM GPIOCR bit used to control the function | |
| */ | |
| struct prcm_gpiocr_altcx { | |
| bool used:1; | |
| u8 reg_index:2; | |
| u8 control_bit:5; | |
| } __packed; | |
| /** | |
| * struct prcm_gpio_altcx_pin_desc - Other alternate-C pin | |
| * @pin: The pin number | |
| * @altcx: array of other alternate-C[1-4] functions | |
| */ | |
| struct prcm_gpiocr_altcx_pin_desc { | |
| unsigned short pin; | |
| struct prcm_gpiocr_altcx altcx[PRCM_IDX_GPIOCR_ALTC_MAX]; | |
| }; | |
| /** | |
| * struct nmk_function - Nomadik pinctrl mux function | |
| * @name: The name of the function, exported to pinctrl core. | |
| * @groups: An array of pin groups that may select this function. | |
| * @ngroups: The number of entries in @groups. | |
| */ | |
| struct nmk_function { | |
| const char *name; | |
| const char * const *groups; | |
| unsigned ngroups; | |
| }; | |
| /** | |
| * struct nmk_pingroup - describes a Nomadik pin group | |
| * @name: the name of this specific pin group | |
| * @pins: an array of discrete physical pins used in this group, taken | |
| * from the driver-local pin enumeration space | |
| * @num_pins: the number of pins in this group array, i.e. the number of | |
| * elements in .pins so we can iterate over that array | |
| * @altsetting: the altsetting to apply to all pins in this group to | |
| * configure them to be used by a function | |
| */ | |
| struct nmk_pingroup { | |
| const char *name; | |
| const unsigned int *pins; | |
| const unsigned npins; | |
| int altsetting; | |
| }; | |
| /** | |
| * struct nmk_pinctrl_soc_data - Nomadik pin controller per-SoC configuration | |
| * @pins: An array describing all pins the pin controller affects. | |
| * All pins which are also GPIOs must be listed first within the | |
| * array, and be numbered identically to the GPIO controller's | |
| * numbering. | |
| * @npins: The number of entries in @pins. | |
| * @functions: The functions supported on this SoC. | |
| * @nfunction: The number of entries in @functions. | |
| * @groups: An array describing all pin groups the pin SoC supports. | |
| * @ngroups: The number of entries in @groups. | |
| * @altcx_pins: The pins that support Other alternate-C function on this SoC | |
| * @npins_altcx: The number of Other alternate-C pins | |
| * @prcm_gpiocr_registers: The array of PRCM GPIOCR registers on this SoC | |
| */ | |
| struct nmk_pinctrl_soc_data { | |
| const struct pinctrl_pin_desc *pins; | |
| unsigned npins; | |
| const struct nmk_function *functions; | |
| unsigned nfunctions; | |
| const struct nmk_pingroup *groups; | |
| unsigned ngroups; | |
| const struct prcm_gpiocr_altcx_pin_desc *altcx_pins; | |
| unsigned npins_altcx; | |
| const u16 *prcm_gpiocr_registers; | |
| }; | |
| #ifdef CONFIG_PINCTRL_STN8815 | |
| void nmk_pinctrl_stn8815_init(const struct nmk_pinctrl_soc_data **soc); | |
| #else | |
| static inline void | |
| nmk_pinctrl_stn8815_init(const struct nmk_pinctrl_soc_data **soc) | |
| { | |
| } | |
| #endif | |
| #ifdef CONFIG_PINCTRL_DB8500 | |
| void nmk_pinctrl_db8500_init(const struct nmk_pinctrl_soc_data **soc); | |
| #else | |
| static inline void | |
| nmk_pinctrl_db8500_init(const struct nmk_pinctrl_soc_data **soc) | |
| { | |
| } | |
| #endif | |
| #ifdef CONFIG_PINCTRL_DB8540 | |
| void nmk_pinctrl_db8540_init(const struct nmk_pinctrl_soc_data **soc); | |
| #else | |
| static inline void | |
| nmk_pinctrl_db8540_init(const struct nmk_pinctrl_soc_data **soc) | |
| { | |
| } | |
| #endif | |
| #endif /* PINCTRL_PINCTRL_NOMADIK_H */ |