| /* | |
| * IBM Real-Time Linux driver | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | |
| * | |
| * Copyright (C) IBM Corporation, 2010 | |
| * | |
| * Author: Keith Mannthey <kmannth@us.ibm.com> | |
| * Vernon Mauery <vernux@us.ibm.com> | |
| * | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/kernel.h> | |
| #include <linux/delay.h> | |
| #include <linux/module.h> | |
| #include <linux/io.h> | |
| #include <linux/dmi.h> | |
| #include <linux/efi.h> | |
| #include <linux/mutex.h> | |
| #include <asm/bios_ebda.h> | |
| #include <linux/io-64-nonatomic-lo-hi.h> | |
| static bool force; | |
| module_param(force, bool, 0); | |
| MODULE_PARM_DESC(force, "Force driver load, ignore DMI data"); | |
| static bool debug; | |
| module_param(debug, bool, 0644); | |
| MODULE_PARM_DESC(debug, "Show debug output"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_AUTHOR("Keith Mannthey <kmmanth@us.ibm.com>"); | |
| MODULE_AUTHOR("Vernon Mauery <vernux@us.ibm.com>"); | |
| #define RTL_ADDR_TYPE_IO 1 | |
| #define RTL_ADDR_TYPE_MMIO 2 | |
| #define RTL_CMD_ENTER_PRTM 1 | |
| #define RTL_CMD_EXIT_PRTM 2 | |
| /* The RTL table as presented by the EBDA: */ | |
| struct ibm_rtl_table { | |
| char signature[5]; /* signature should be "_RTL_" */ | |
| u8 version; | |
| u8 rt_status; | |
| u8 command; | |
| u8 command_status; | |
| u8 cmd_address_type; | |
| u8 cmd_granularity; | |
| u8 cmd_offset; | |
| u16 reserve1; | |
| u32 cmd_port_address; /* platform dependent address */ | |
| u32 cmd_port_value; /* platform dependent value */ | |
| } __attribute__((packed)); | |
| /* to locate "_RTL_" signature do a masked 5-byte integer compare */ | |
| #define RTL_SIGNATURE 0x0000005f4c54525fULL | |
| #define RTL_MASK 0x000000ffffffffffULL | |
| #define RTL_DEBUG(fmt, ...) \ | |
| do { \ | |
| if (debug) \ | |
| pr_info(fmt, ##__VA_ARGS__); \ | |
| } while (0) | |
| static DEFINE_MUTEX(rtl_lock); | |
| static struct ibm_rtl_table __iomem *rtl_table; | |
| static void __iomem *ebda_map; | |
| static void __iomem *rtl_cmd_addr; | |
| static u8 rtl_cmd_type; | |
| static u8 rtl_cmd_width; | |
| static void __iomem *rtl_port_map(phys_addr_t addr, unsigned long len) | |
| { | |
| if (rtl_cmd_type == RTL_ADDR_TYPE_MMIO) | |
| return ioremap(addr, len); | |
| return ioport_map(addr, len); | |
| } | |
| static void rtl_port_unmap(void __iomem *addr) | |
| { | |
| if (addr && rtl_cmd_type == RTL_ADDR_TYPE_MMIO) | |
| iounmap(addr); | |
| else | |
| ioport_unmap(addr); | |
| } | |
| static int ibm_rtl_write(u8 value) | |
| { | |
| int ret = 0, count = 0; | |
| static u32 cmd_port_val; | |
| RTL_DEBUG("%s(%d)\n", __func__, value); | |
| value = value == 1 ? RTL_CMD_ENTER_PRTM : RTL_CMD_EXIT_PRTM; | |
| mutex_lock(&rtl_lock); | |
| if (ioread8(&rtl_table->rt_status) != value) { | |
| iowrite8(value, &rtl_table->command); | |
| switch (rtl_cmd_width) { | |
| case 8: | |
| cmd_port_val = ioread8(&rtl_table->cmd_port_value); | |
| RTL_DEBUG("cmd_port_val = %u\n", cmd_port_val); | |
| iowrite8((u8)cmd_port_val, rtl_cmd_addr); | |
| break; | |
| case 16: | |
| cmd_port_val = ioread16(&rtl_table->cmd_port_value); | |
| RTL_DEBUG("cmd_port_val = %u\n", cmd_port_val); | |
| iowrite16((u16)cmd_port_val, rtl_cmd_addr); | |
| break; | |
| case 32: | |
| cmd_port_val = ioread32(&rtl_table->cmd_port_value); | |
| RTL_DEBUG("cmd_port_val = %u\n", cmd_port_val); | |
| iowrite32(cmd_port_val, rtl_cmd_addr); | |
| break; | |
| } | |
| while (ioread8(&rtl_table->command)) { | |
| msleep(10); | |
| if (count++ > 500) { | |
| pr_err("Hardware not responding to " | |
| "mode switch request\n"); | |
| ret = -EIO; | |
| break; | |
| } | |
| } | |
| if (ioread8(&rtl_table->command_status)) { | |
| RTL_DEBUG("command_status reports failed command\n"); | |
| ret = -EIO; | |
| } | |
| } | |
| mutex_unlock(&rtl_lock); | |
| return ret; | |
| } | |
| static ssize_t rtl_show_version(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| return sprintf(buf, "%d\n", (int)ioread8(&rtl_table->version)); | |
| } | |
| static ssize_t rtl_show_state(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| return sprintf(buf, "%d\n", ioread8(&rtl_table->rt_status)); | |
| } | |
| static ssize_t rtl_set_state(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, | |
| size_t count) | |
| { | |
| ssize_t ret; | |
| if (count < 1 || count > 2) | |
| return -EINVAL; | |
| switch (buf[0]) { | |
| case '0': | |
| ret = ibm_rtl_write(0); | |
| break; | |
| case '1': | |
| ret = ibm_rtl_write(1); | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| } | |
| if (ret >= 0) | |
| ret = count; | |
| return ret; | |
| } | |
| static struct bus_type rtl_subsys = { | |
| .name = "ibm_rtl", | |
| .dev_name = "ibm_rtl", | |
| }; | |
| static DEVICE_ATTR(version, S_IRUGO, rtl_show_version, NULL); | |
| static DEVICE_ATTR(state, 0600, rtl_show_state, rtl_set_state); | |
| static struct device_attribute *rtl_attributes[] = { | |
| &dev_attr_version, | |
| &dev_attr_state, | |
| NULL | |
| }; | |
| static int rtl_setup_sysfs(void) { | |
| int ret, i; | |
| ret = subsys_system_register(&rtl_subsys, NULL); | |
| if (!ret) { | |
| for (i = 0; rtl_attributes[i]; i ++) | |
| device_create_file(rtl_subsys.dev_root, rtl_attributes[i]); | |
| } | |
| return ret; | |
| } | |
| static void rtl_teardown_sysfs(void) { | |
| int i; | |
| for (i = 0; rtl_attributes[i]; i ++) | |
| device_remove_file(rtl_subsys.dev_root, rtl_attributes[i]); | |
| bus_unregister(&rtl_subsys); | |
| } | |
| static struct dmi_system_id __initdata ibm_rtl_dmi_table[] = { | |
| { \ | |
| .matches = { \ | |
| DMI_MATCH(DMI_SYS_VENDOR, "IBM"), \ | |
| }, \ | |
| }, | |
| { } | |
| }; | |
| static int __init ibm_rtl_init(void) { | |
| unsigned long ebda_addr, ebda_size; | |
| unsigned int ebda_kb; | |
| int ret = -ENODEV, i; | |
| if (force) | |
| pr_warn("module loaded by force\n"); | |
| /* first ensure that we are running on IBM HW */ | |
| else if (efi_enabled(EFI_BOOT) || !dmi_check_system(ibm_rtl_dmi_table)) | |
| return -ENODEV; | |
| /* Get the address for the Extended BIOS Data Area */ | |
| ebda_addr = get_bios_ebda(); | |
| if (!ebda_addr) { | |
| RTL_DEBUG("no BIOS EBDA found\n"); | |
| return -ENODEV; | |
| } | |
| ebda_map = ioremap(ebda_addr, 4); | |
| if (!ebda_map) | |
| return -ENOMEM; | |
| /* First word in the EDBA is the Size in KB */ | |
| ebda_kb = ioread16(ebda_map); | |
| RTL_DEBUG("EBDA is %d kB\n", ebda_kb); | |
| if (ebda_kb == 0) | |
| goto out; | |
| iounmap(ebda_map); | |
| ebda_size = ebda_kb*1024; | |
| /* Remap the whole table */ | |
| ebda_map = ioremap(ebda_addr, ebda_size); | |
| if (!ebda_map) | |
| return -ENOMEM; | |
| /* search for the _RTL_ signature at the start of the table */ | |
| for (i = 0 ; i < ebda_size/sizeof(unsigned int); i++) { | |
| struct ibm_rtl_table __iomem * tmp; | |
| tmp = (struct ibm_rtl_table __iomem *) (ebda_map+i); | |
| if ((readq(&tmp->signature) & RTL_MASK) == RTL_SIGNATURE) { | |
| phys_addr_t addr; | |
| unsigned int plen; | |
| RTL_DEBUG("found RTL_SIGNATURE at %p\n", tmp); | |
| rtl_table = tmp; | |
| /* The address, value, width and offset are platform | |
| * dependent and found in the ibm_rtl_table */ | |
| rtl_cmd_width = ioread8(&rtl_table->cmd_granularity); | |
| rtl_cmd_type = ioread8(&rtl_table->cmd_address_type); | |
| RTL_DEBUG("rtl_cmd_width = %u, rtl_cmd_type = %u\n", | |
| rtl_cmd_width, rtl_cmd_type); | |
| addr = ioread32(&rtl_table->cmd_port_address); | |
| RTL_DEBUG("addr = %#llx\n", (unsigned long long)addr); | |
| plen = rtl_cmd_width/sizeof(char); | |
| rtl_cmd_addr = rtl_port_map(addr, plen); | |
| RTL_DEBUG("rtl_cmd_addr = %p\n", rtl_cmd_addr); | |
| if (!rtl_cmd_addr) { | |
| ret = -ENOMEM; | |
| break; | |
| } | |
| ret = rtl_setup_sysfs(); | |
| break; | |
| } | |
| } | |
| out: | |
| if (ret) { | |
| iounmap(ebda_map); | |
| rtl_port_unmap(rtl_cmd_addr); | |
| } | |
| return ret; | |
| } | |
| static void __exit ibm_rtl_exit(void) | |
| { | |
| if (rtl_table) { | |
| RTL_DEBUG("cleaning up"); | |
| /* do not leave the machine in SMI-free mode */ | |
| ibm_rtl_write(0); | |
| /* unmap, unlink and remove all traces */ | |
| rtl_teardown_sysfs(); | |
| iounmap(ebda_map); | |
| rtl_port_unmap(rtl_cmd_addr); | |
| } | |
| } | |
| module_init(ibm_rtl_init); | |
| module_exit(ibm_rtl_exit); |