| /* Moorestown PMIC GPIO (access through IPC) driver | |
| * Copyright (c) 2008 - 2009, Intel Corporation. | |
| * | |
| * Author: Alek Du <alek.du@intel.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| /* Supports: | |
| * Moorestown platform PMIC chip | |
| */ | |
| #define pr_fmt(fmt) "%s: " fmt, __func__ | |
| #include <linux/kernel.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/delay.h> | |
| #include <linux/stddef.h> | |
| #include <linux/slab.h> | |
| #include <linux/ioport.h> | |
| #include <linux/init.h> | |
| #include <linux/io.h> | |
| #include <linux/gpio/driver.h> | |
| #include <asm/intel_scu_ipc.h> | |
| #include <linux/device.h> | |
| #include <linux/intel_pmic_gpio.h> | |
| #include <linux/platform_device.h> | |
| #define DRIVER_NAME "pmic_gpio" | |
| /* register offset that IPC driver should use | |
| * 8 GPIO + 8 GPOSW (6 controllable) + 8GPO | |
| */ | |
| enum pmic_gpio_register { | |
| GPIO0 = 0xE0, | |
| GPIO7 = 0xE7, | |
| GPIOINT = 0xE8, | |
| GPOSWCTL0 = 0xEC, | |
| GPOSWCTL5 = 0xF1, | |
| GPO = 0xF4, | |
| }; | |
| /* bits definition for GPIO & GPOSW */ | |
| #define GPIO_DRV 0x01 | |
| #define GPIO_DIR 0x02 | |
| #define GPIO_DIN 0x04 | |
| #define GPIO_DOU 0x08 | |
| #define GPIO_INTCTL 0x30 | |
| #define GPIO_DBC 0xc0 | |
| #define GPOSW_DRV 0x01 | |
| #define GPOSW_DOU 0x08 | |
| #define GPOSW_RDRV 0x30 | |
| #define GPIO_UPDATE_TYPE 0x80000000 | |
| #define NUM_GPIO 24 | |
| struct pmic_gpio { | |
| struct mutex buslock; | |
| struct gpio_chip chip; | |
| void *gpiointr; | |
| int irq; | |
| unsigned irq_base; | |
| unsigned int update_type; | |
| u32 trigger_type; | |
| }; | |
| static void pmic_program_irqtype(int gpio, int type) | |
| { | |
| if (type & IRQ_TYPE_EDGE_RISING) | |
| intel_scu_ipc_update_register(GPIO0 + gpio, 0x20, 0x20); | |
| else | |
| intel_scu_ipc_update_register(GPIO0 + gpio, 0x00, 0x20); | |
| if (type & IRQ_TYPE_EDGE_FALLING) | |
| intel_scu_ipc_update_register(GPIO0 + gpio, 0x10, 0x10); | |
| else | |
| intel_scu_ipc_update_register(GPIO0 + gpio, 0x00, 0x10); | |
| }; | |
| static int pmic_gpio_direction_input(struct gpio_chip *chip, unsigned offset) | |
| { | |
| if (offset >= 8) { | |
| pr_err("only pin 0-7 support input\n"); | |
| return -1;/* we only have 8 GPIO can use as input */ | |
| } | |
| return intel_scu_ipc_update_register(GPIO0 + offset, | |
| GPIO_DIR, GPIO_DIR); | |
| } | |
| static int pmic_gpio_direction_output(struct gpio_chip *chip, | |
| unsigned offset, int value) | |
| { | |
| int rc = 0; | |
| if (offset < 8)/* it is GPIO */ | |
| rc = intel_scu_ipc_update_register(GPIO0 + offset, | |
| GPIO_DRV | (value ? GPIO_DOU : 0), | |
| GPIO_DRV | GPIO_DOU | GPIO_DIR); | |
| else if (offset < 16)/* it is GPOSW */ | |
| rc = intel_scu_ipc_update_register(GPOSWCTL0 + offset - 8, | |
| GPOSW_DRV | (value ? GPOSW_DOU : 0), | |
| GPOSW_DRV | GPOSW_DOU | GPOSW_RDRV); | |
| else if (offset > 15 && offset < 24)/* it is GPO */ | |
| rc = intel_scu_ipc_update_register(GPO, | |
| value ? 1 << (offset - 16) : 0, | |
| 1 << (offset - 16)); | |
| else { | |
| pr_err("invalid PMIC GPIO pin %d!\n", offset); | |
| WARN_ON(1); | |
| } | |
| return rc; | |
| } | |
| static int pmic_gpio_get(struct gpio_chip *chip, unsigned offset) | |
| { | |
| u8 r; | |
| int ret; | |
| /* we only have 8 GPIO pins we can use as input */ | |
| if (offset >= 8) | |
| return -EOPNOTSUPP; | |
| ret = intel_scu_ipc_ioread8(GPIO0 + offset, &r); | |
| if (ret < 0) | |
| return ret; | |
| return r & GPIO_DIN; | |
| } | |
| static void pmic_gpio_set(struct gpio_chip *chip, unsigned offset, int value) | |
| { | |
| if (offset < 8)/* it is GPIO */ | |
| intel_scu_ipc_update_register(GPIO0 + offset, | |
| GPIO_DRV | (value ? GPIO_DOU : 0), | |
| GPIO_DRV | GPIO_DOU); | |
| else if (offset < 16)/* it is GPOSW */ | |
| intel_scu_ipc_update_register(GPOSWCTL0 + offset - 8, | |
| GPOSW_DRV | (value ? GPOSW_DOU : 0), | |
| GPOSW_DRV | GPOSW_DOU | GPOSW_RDRV); | |
| else if (offset > 15 && offset < 24) /* it is GPO */ | |
| intel_scu_ipc_update_register(GPO, | |
| value ? 1 << (offset - 16) : 0, | |
| 1 << (offset - 16)); | |
| } | |
| /* | |
| * This is called from genirq with pg->buslock locked and | |
| * irq_desc->lock held. We can not access the scu bus here, so we | |
| * store the change and update in the bus_sync_unlock() function below | |
| */ | |
| static int pmic_irq_type(struct irq_data *data, unsigned type) | |
| { | |
| struct pmic_gpio *pg = irq_data_get_irq_chip_data(data); | |
| u32 gpio = data->irq - pg->irq_base; | |
| if (gpio >= pg->chip.ngpio) | |
| return -EINVAL; | |
| pg->trigger_type = type; | |
| pg->update_type = gpio | GPIO_UPDATE_TYPE; | |
| return 0; | |
| } | |
| static int pmic_gpio_to_irq(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct pmic_gpio *pg = gpiochip_get_data(chip); | |
| return pg->irq_base + offset; | |
| } | |
| static void pmic_bus_lock(struct irq_data *data) | |
| { | |
| struct pmic_gpio *pg = irq_data_get_irq_chip_data(data); | |
| mutex_lock(&pg->buslock); | |
| } | |
| static void pmic_bus_sync_unlock(struct irq_data *data) | |
| { | |
| struct pmic_gpio *pg = irq_data_get_irq_chip_data(data); | |
| if (pg->update_type) { | |
| unsigned int gpio = pg->update_type & ~GPIO_UPDATE_TYPE; | |
| pmic_program_irqtype(gpio, pg->trigger_type); | |
| pg->update_type = 0; | |
| } | |
| mutex_unlock(&pg->buslock); | |
| } | |
| /* the gpiointr register is read-clear, so just do nothing. */ | |
| static void pmic_irq_unmask(struct irq_data *data) { } | |
| static void pmic_irq_mask(struct irq_data *data) { } | |
| static struct irq_chip pmic_irqchip = { | |
| .name = "PMIC-GPIO", | |
| .irq_mask = pmic_irq_mask, | |
| .irq_unmask = pmic_irq_unmask, | |
| .irq_set_type = pmic_irq_type, | |
| .irq_bus_lock = pmic_bus_lock, | |
| .irq_bus_sync_unlock = pmic_bus_sync_unlock, | |
| }; | |
| static irqreturn_t pmic_irq_handler(int irq, void *data) | |
| { | |
| struct pmic_gpio *pg = data; | |
| u8 intsts = *((u8 *)pg->gpiointr + 4); | |
| int gpio; | |
| irqreturn_t ret = IRQ_NONE; | |
| for (gpio = 0; gpio < 8; gpio++) { | |
| if (intsts & (1 << gpio)) { | |
| pr_debug("pmic pin %d triggered\n", gpio); | |
| generic_handle_irq(pg->irq_base + gpio); | |
| ret = IRQ_HANDLED; | |
| } | |
| } | |
| return ret; | |
| } | |
| static int platform_pmic_gpio_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| int irq = platform_get_irq(pdev, 0); | |
| struct intel_pmic_gpio_platform_data *pdata = dev->platform_data; | |
| struct pmic_gpio *pg; | |
| int retval; | |
| int i; | |
| if (irq < 0) { | |
| dev_dbg(dev, "no IRQ line\n"); | |
| return -EINVAL; | |
| } | |
| if (!pdata || !pdata->gpio_base || !pdata->irq_base) { | |
| dev_dbg(dev, "incorrect or missing platform data\n"); | |
| return -EINVAL; | |
| } | |
| pg = kzalloc(sizeof(*pg), GFP_KERNEL); | |
| if (!pg) | |
| return -ENOMEM; | |
| dev_set_drvdata(dev, pg); | |
| pg->irq = irq; | |
| /* setting up SRAM mapping for GPIOINT register */ | |
| pg->gpiointr = ioremap_nocache(pdata->gpiointr, 8); | |
| if (!pg->gpiointr) { | |
| pr_err("Can not map GPIOINT\n"); | |
| retval = -EINVAL; | |
| goto err2; | |
| } | |
| pg->irq_base = pdata->irq_base; | |
| pg->chip.label = "intel_pmic"; | |
| pg->chip.direction_input = pmic_gpio_direction_input; | |
| pg->chip.direction_output = pmic_gpio_direction_output; | |
| pg->chip.get = pmic_gpio_get; | |
| pg->chip.set = pmic_gpio_set; | |
| pg->chip.to_irq = pmic_gpio_to_irq; | |
| pg->chip.base = pdata->gpio_base; | |
| pg->chip.ngpio = NUM_GPIO; | |
| pg->chip.can_sleep = 1; | |
| pg->chip.parent = dev; | |
| mutex_init(&pg->buslock); | |
| pg->chip.parent = dev; | |
| retval = gpiochip_add_data(&pg->chip, pg); | |
| if (retval) { | |
| pr_err("Can not add pmic gpio chip\n"); | |
| goto err; | |
| } | |
| retval = request_irq(pg->irq, pmic_irq_handler, 0, "pmic", pg); | |
| if (retval) { | |
| pr_warn("Interrupt request failed\n"); | |
| goto fail_request_irq; | |
| } | |
| for (i = 0; i < 8; i++) { | |
| irq_set_chip_and_handler_name(i + pg->irq_base, | |
| &pmic_irqchip, | |
| handle_simple_irq, | |
| "demux"); | |
| irq_set_chip_data(i + pg->irq_base, pg); | |
| } | |
| return 0; | |
| fail_request_irq: | |
| gpiochip_remove(&pg->chip); | |
| err: | |
| iounmap(pg->gpiointr); | |
| err2: | |
| kfree(pg); | |
| return retval; | |
| } | |
| /* at the same time, register a platform driver | |
| * this supports the sfi 0.81 fw */ | |
| static struct platform_driver platform_pmic_gpio_driver = { | |
| .driver = { | |
| .name = DRIVER_NAME, | |
| }, | |
| .probe = platform_pmic_gpio_probe, | |
| }; | |
| static int __init platform_pmic_gpio_init(void) | |
| { | |
| return platform_driver_register(&platform_pmic_gpio_driver); | |
| } | |
| subsys_initcall(platform_pmic_gpio_init); |