| /* | |
| * pps-gpio.c -- PPS client driver using GPIO | |
| * | |
| * | |
| * Copyright (C) 2010 Ricardo Martins <rasm@fe.up.pt> | |
| * Copyright (C) 2011 James Nuss <jamesnuss@nanometrics.ca> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| #define PPS_GPIO_NAME "pps-gpio" | |
| #define pr_fmt(fmt) PPS_GPIO_NAME ": " fmt | |
| #include <linux/init.h> | |
| #include <linux/kernel.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/slab.h> | |
| #include <linux/pps_kernel.h> | |
| #include <linux/pps-gpio.h> | |
| #include <linux/gpio.h> | |
| #include <linux/list.h> | |
| #include <linux/of_device.h> | |
| #include <linux/of_gpio.h> | |
| /* Info for each registered platform device */ | |
| struct pps_gpio_device_data { | |
| int irq; /* IRQ used as PPS source */ | |
| struct pps_device *pps; /* PPS source device */ | |
| struct pps_source_info info; /* PPS source information */ | |
| bool assert_falling_edge; | |
| bool capture_clear; | |
| unsigned int gpio_pin; | |
| }; | |
| /* | |
| * Report the PPS event | |
| */ | |
| static irqreturn_t pps_gpio_irq_handler(int irq, void *data) | |
| { | |
| const struct pps_gpio_device_data *info; | |
| struct pps_event_time ts; | |
| int rising_edge; | |
| /* Get the time stamp first */ | |
| pps_get_ts(&ts); | |
| info = data; | |
| rising_edge = gpio_get_value(info->gpio_pin); | |
| if ((rising_edge && !info->assert_falling_edge) || | |
| (!rising_edge && info->assert_falling_edge)) | |
| pps_event(info->pps, &ts, PPS_CAPTUREASSERT, NULL); | |
| else if (info->capture_clear && | |
| ((rising_edge && info->assert_falling_edge) || | |
| (!rising_edge && !info->assert_falling_edge))) | |
| pps_event(info->pps, &ts, PPS_CAPTURECLEAR, NULL); | |
| return IRQ_HANDLED; | |
| } | |
| static unsigned long | |
| get_irqf_trigger_flags(const struct pps_gpio_device_data *data) | |
| { | |
| unsigned long flags = data->assert_falling_edge ? | |
| IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING; | |
| if (data->capture_clear) { | |
| flags |= ((flags & IRQF_TRIGGER_RISING) ? | |
| IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING); | |
| } | |
| return flags; | |
| } | |
| static int pps_gpio_probe(struct platform_device *pdev) | |
| { | |
| struct pps_gpio_device_data *data; | |
| const char *gpio_label; | |
| int ret; | |
| int pps_default_params; | |
| const struct pps_gpio_platform_data *pdata = pdev->dev.platform_data; | |
| struct device_node *np = pdev->dev.of_node; | |
| /* allocate space for device info */ | |
| data = devm_kzalloc(&pdev->dev, sizeof(struct pps_gpio_device_data), | |
| GFP_KERNEL); | |
| if (!data) | |
| return -ENOMEM; | |
| if (pdata) { | |
| data->gpio_pin = pdata->gpio_pin; | |
| gpio_label = pdata->gpio_label; | |
| data->assert_falling_edge = pdata->assert_falling_edge; | |
| data->capture_clear = pdata->capture_clear; | |
| } else { | |
| ret = of_get_gpio(np, 0); | |
| if (ret < 0) { | |
| dev_err(&pdev->dev, "failed to get GPIO from device tree\n"); | |
| return ret; | |
| } | |
| data->gpio_pin = ret; | |
| gpio_label = PPS_GPIO_NAME; | |
| if (of_get_property(np, "assert-falling-edge", NULL)) | |
| data->assert_falling_edge = true; | |
| } | |
| /* GPIO setup */ | |
| ret = devm_gpio_request(&pdev->dev, data->gpio_pin, gpio_label); | |
| if (ret) { | |
| dev_err(&pdev->dev, "failed to request GPIO %u\n", | |
| data->gpio_pin); | |
| return ret; | |
| } | |
| ret = gpio_direction_input(data->gpio_pin); | |
| if (ret) { | |
| dev_err(&pdev->dev, "failed to set pin direction\n"); | |
| return -EINVAL; | |
| } | |
| /* IRQ setup */ | |
| ret = gpio_to_irq(data->gpio_pin); | |
| if (ret < 0) { | |
| dev_err(&pdev->dev, "failed to map GPIO to IRQ: %d\n", ret); | |
| return -EINVAL; | |
| } | |
| data->irq = ret; | |
| /* initialize PPS specific parts of the bookkeeping data structure. */ | |
| data->info.mode = PPS_CAPTUREASSERT | PPS_OFFSETASSERT | | |
| PPS_ECHOASSERT | PPS_CANWAIT | PPS_TSFMT_TSPEC; | |
| if (data->capture_clear) | |
| data->info.mode |= PPS_CAPTURECLEAR | PPS_OFFSETCLEAR | | |
| PPS_ECHOCLEAR; | |
| data->info.owner = THIS_MODULE; | |
| snprintf(data->info.name, PPS_MAX_NAME_LEN - 1, "%s.%d", | |
| pdev->name, pdev->id); | |
| /* register PPS source */ | |
| pps_default_params = PPS_CAPTUREASSERT | PPS_OFFSETASSERT; | |
| if (data->capture_clear) | |
| pps_default_params |= PPS_CAPTURECLEAR | PPS_OFFSETCLEAR; | |
| data->pps = pps_register_source(&data->info, pps_default_params); | |
| if (data->pps == NULL) { | |
| dev_err(&pdev->dev, "failed to register IRQ %d as PPS source\n", | |
| data->irq); | |
| return -EINVAL; | |
| } | |
| /* register IRQ interrupt handler */ | |
| ret = devm_request_irq(&pdev->dev, data->irq, pps_gpio_irq_handler, | |
| get_irqf_trigger_flags(data), data->info.name, data); | |
| if (ret) { | |
| pps_unregister_source(data->pps); | |
| dev_err(&pdev->dev, "failed to acquire IRQ %d\n", data->irq); | |
| return -EINVAL; | |
| } | |
| platform_set_drvdata(pdev, data); | |
| dev_info(data->pps->dev, "Registered IRQ %d as PPS source\n", | |
| data->irq); | |
| return 0; | |
| } | |
| static int pps_gpio_remove(struct platform_device *pdev) | |
| { | |
| struct pps_gpio_device_data *data = platform_get_drvdata(pdev); | |
| pps_unregister_source(data->pps); | |
| dev_info(&pdev->dev, "removed IRQ %d as PPS source\n", data->irq); | |
| return 0; | |
| } | |
| static const struct of_device_id pps_gpio_dt_ids[] = { | |
| { .compatible = "pps-gpio", }, | |
| { /* sentinel */ } | |
| }; | |
| MODULE_DEVICE_TABLE(of, pps_gpio_dt_ids); | |
| static struct platform_driver pps_gpio_driver = { | |
| .probe = pps_gpio_probe, | |
| .remove = pps_gpio_remove, | |
| .driver = { | |
| .name = PPS_GPIO_NAME, | |
| .of_match_table = pps_gpio_dt_ids, | |
| }, | |
| }; | |
| module_platform_driver(pps_gpio_driver); | |
| MODULE_AUTHOR("Ricardo Martins <rasm@fe.up.pt>"); | |
| MODULE_AUTHOR("James Nuss <jamesnuss@nanometrics.ca>"); | |
| MODULE_DESCRIPTION("Use GPIO pin as PPS source"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_VERSION("1.0.0"); |