| /* | |
| * Copyright (c) 2007 Ben Dooks | |
| * Copyright (c) 2008 Simtec Electronics | |
| * Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org> | |
| * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com> | |
| * | |
| * PWM driver for Samsung SoCs | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License. | |
| */ | |
| #include <linux/bitops.h> | |
| #include <linux/clk.h> | |
| #include <linux/export.h> | |
| #include <linux/err.h> | |
| #include <linux/io.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/pwm.h> | |
| #include <linux/slab.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/time.h> | |
| /* For struct samsung_timer_variant and samsung_pwm_lock. */ | |
| #include <clocksource/samsung_pwm.h> | |
| #define REG_TCFG0 0x00 | |
| #define REG_TCFG1 0x04 | |
| #define REG_TCON 0x08 | |
| #define REG_TCNTB(chan) (0x0c + ((chan) * 0xc)) | |
| #define REG_TCMPB(chan) (0x10 + ((chan) * 0xc)) | |
| #define TCFG0_PRESCALER_MASK 0xff | |
| #define TCFG0_PRESCALER1_SHIFT 8 | |
| #define TCFG1_MUX_MASK 0xf | |
| #define TCFG1_SHIFT(chan) (4 * (chan)) | |
| /* | |
| * Each channel occupies 4 bits in TCON register, but there is a gap of 4 | |
| * bits (one channel) after channel 0, so channels have different numbering | |
| * when accessing TCON register. See to_tcon_channel() function. | |
| * | |
| * In addition, the location of autoreload bit for channel 4 (TCON channel 5) | |
| * in its set of bits is 2 as opposed to 3 for other channels. | |
| */ | |
| #define TCON_START(chan) BIT(4 * (chan) + 0) | |
| #define TCON_MANUALUPDATE(chan) BIT(4 * (chan) + 1) | |
| #define TCON_INVERT(chan) BIT(4 * (chan) + 2) | |
| #define _TCON_AUTORELOAD(chan) BIT(4 * (chan) + 3) | |
| #define _TCON_AUTORELOAD4(chan) BIT(4 * (chan) + 2) | |
| #define TCON_AUTORELOAD(chan) \ | |
| ((chan < 5) ? _TCON_AUTORELOAD(chan) : _TCON_AUTORELOAD4(chan)) | |
| /** | |
| * struct samsung_pwm_channel - private data of PWM channel | |
| * @period_ns: current period in nanoseconds programmed to the hardware | |
| * @duty_ns: current duty time in nanoseconds programmed to the hardware | |
| * @tin_ns: time of one timer tick in nanoseconds with current timer rate | |
| */ | |
| struct samsung_pwm_channel { | |
| u32 period_ns; | |
| u32 duty_ns; | |
| u32 tin_ns; | |
| }; | |
| /** | |
| * struct samsung_pwm_chip - private data of PWM chip | |
| * @chip: generic PWM chip | |
| * @variant: local copy of hardware variant data | |
| * @inverter_mask: inverter status for all channels - one bit per channel | |
| * @base: base address of mapped PWM registers | |
| * @base_clk: base clock used to drive the timers | |
| * @tclk0: external clock 0 (can be ERR_PTR if not present) | |
| * @tclk1: external clock 1 (can be ERR_PTR if not present) | |
| */ | |
| struct samsung_pwm_chip { | |
| struct pwm_chip chip; | |
| struct samsung_pwm_variant variant; | |
| u8 inverter_mask; | |
| void __iomem *base; | |
| struct clk *base_clk; | |
| struct clk *tclk0; | |
| struct clk *tclk1; | |
| }; | |
| #ifndef CONFIG_CLKSRC_SAMSUNG_PWM | |
| /* | |
| * PWM block is shared between pwm-samsung and samsung_pwm_timer drivers | |
| * and some registers need access synchronization. If both drivers are | |
| * compiled in, the spinlock is defined in the clocksource driver, | |
| * otherwise following definition is used. | |
| * | |
| * Currently we do not need any more complex synchronization method | |
| * because all the supported SoCs contain only one instance of the PWM | |
| * IP. Should this change, both drivers will need to be modified to | |
| * properly synchronize accesses to particular instances. | |
| */ | |
| static DEFINE_SPINLOCK(samsung_pwm_lock); | |
| #endif | |
| static inline | |
| struct samsung_pwm_chip *to_samsung_pwm_chip(struct pwm_chip *chip) | |
| { | |
| return container_of(chip, struct samsung_pwm_chip, chip); | |
| } | |
| static inline unsigned int to_tcon_channel(unsigned int channel) | |
| { | |
| /* TCON register has a gap of 4 bits (1 channel) after channel 0 */ | |
| return (channel == 0) ? 0 : (channel + 1); | |
| } | |
| static void pwm_samsung_set_divisor(struct samsung_pwm_chip *pwm, | |
| unsigned int channel, u8 divisor) | |
| { | |
| u8 shift = TCFG1_SHIFT(channel); | |
| unsigned long flags; | |
| u32 reg; | |
| u8 bits; | |
| bits = (fls(divisor) - 1) - pwm->variant.div_base; | |
| spin_lock_irqsave(&samsung_pwm_lock, flags); | |
| reg = readl(pwm->base + REG_TCFG1); | |
| reg &= ~(TCFG1_MUX_MASK << shift); | |
| reg |= bits << shift; | |
| writel(reg, pwm->base + REG_TCFG1); | |
| spin_unlock_irqrestore(&samsung_pwm_lock, flags); | |
| } | |
| static int pwm_samsung_is_tdiv(struct samsung_pwm_chip *chip, unsigned int chan) | |
| { | |
| struct samsung_pwm_variant *variant = &chip->variant; | |
| u32 reg; | |
| reg = readl(chip->base + REG_TCFG1); | |
| reg >>= TCFG1_SHIFT(chan); | |
| reg &= TCFG1_MUX_MASK; | |
| return (BIT(reg) & variant->tclk_mask) == 0; | |
| } | |
| static unsigned long pwm_samsung_get_tin_rate(struct samsung_pwm_chip *chip, | |
| unsigned int chan) | |
| { | |
| unsigned long rate; | |
| u32 reg; | |
| rate = clk_get_rate(chip->base_clk); | |
| reg = readl(chip->base + REG_TCFG0); | |
| if (chan >= 2) | |
| reg >>= TCFG0_PRESCALER1_SHIFT; | |
| reg &= TCFG0_PRESCALER_MASK; | |
| return rate / (reg + 1); | |
| } | |
| static unsigned long pwm_samsung_calc_tin(struct samsung_pwm_chip *chip, | |
| unsigned int chan, unsigned long freq) | |
| { | |
| struct samsung_pwm_variant *variant = &chip->variant; | |
| unsigned long rate; | |
| struct clk *clk; | |
| u8 div; | |
| if (!pwm_samsung_is_tdiv(chip, chan)) { | |
| clk = (chan < 2) ? chip->tclk0 : chip->tclk1; | |
| if (!IS_ERR(clk)) { | |
| rate = clk_get_rate(clk); | |
| if (rate) | |
| return rate; | |
| } | |
| dev_warn(chip->chip.dev, | |
| "tclk of PWM %d is inoperational, using tdiv\n", chan); | |
| } | |
| rate = pwm_samsung_get_tin_rate(chip, chan); | |
| dev_dbg(chip->chip.dev, "tin parent at %lu\n", rate); | |
| /* | |
| * Compare minimum PWM frequency that can be achieved with possible | |
| * divider settings and choose the lowest divisor that can generate | |
| * frequencies lower than requested. | |
| */ | |
| if (variant->bits < 32) { | |
| /* Only for s3c24xx */ | |
| for (div = variant->div_base; div < 4; ++div) | |
| if ((rate >> (variant->bits + div)) < freq) | |
| break; | |
| } else { | |
| /* | |
| * Other variants have enough counter bits to generate any | |
| * requested rate, so no need to check higher divisors. | |
| */ | |
| div = variant->div_base; | |
| } | |
| pwm_samsung_set_divisor(chip, chan, BIT(div)); | |
| return rate >> div; | |
| } | |
| static int pwm_samsung_request(struct pwm_chip *chip, struct pwm_device *pwm) | |
| { | |
| struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip); | |
| struct samsung_pwm_channel *our_chan; | |
| if (!(our_chip->variant.output_mask & BIT(pwm->hwpwm))) { | |
| dev_warn(chip->dev, | |
| "tried to request PWM channel %d without output\n", | |
| pwm->hwpwm); | |
| return -EINVAL; | |
| } | |
| our_chan = devm_kzalloc(chip->dev, sizeof(*our_chan), GFP_KERNEL); | |
| if (!our_chan) | |
| return -ENOMEM; | |
| pwm_set_chip_data(pwm, our_chan); | |
| return 0; | |
| } | |
| static void pwm_samsung_free(struct pwm_chip *chip, struct pwm_device *pwm) | |
| { | |
| devm_kfree(chip->dev, pwm_get_chip_data(pwm)); | |
| pwm_set_chip_data(pwm, NULL); | |
| } | |
| static int pwm_samsung_enable(struct pwm_chip *chip, struct pwm_device *pwm) | |
| { | |
| struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip); | |
| unsigned int tcon_chan = to_tcon_channel(pwm->hwpwm); | |
| unsigned long flags; | |
| u32 tcon; | |
| spin_lock_irqsave(&samsung_pwm_lock, flags); | |
| tcon = readl(our_chip->base + REG_TCON); | |
| tcon &= ~TCON_START(tcon_chan); | |
| tcon |= TCON_MANUALUPDATE(tcon_chan); | |
| writel(tcon, our_chip->base + REG_TCON); | |
| tcon &= ~TCON_MANUALUPDATE(tcon_chan); | |
| tcon |= TCON_START(tcon_chan) | TCON_AUTORELOAD(tcon_chan); | |
| writel(tcon, our_chip->base + REG_TCON); | |
| spin_unlock_irqrestore(&samsung_pwm_lock, flags); | |
| return 0; | |
| } | |
| static void pwm_samsung_disable(struct pwm_chip *chip, struct pwm_device *pwm) | |
| { | |
| struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip); | |
| unsigned int tcon_chan = to_tcon_channel(pwm->hwpwm); | |
| unsigned long flags; | |
| u32 tcon; | |
| spin_lock_irqsave(&samsung_pwm_lock, flags); | |
| tcon = readl(our_chip->base + REG_TCON); | |
| tcon &= ~TCON_AUTORELOAD(tcon_chan); | |
| writel(tcon, our_chip->base + REG_TCON); | |
| spin_unlock_irqrestore(&samsung_pwm_lock, flags); | |
| } | |
| static void pwm_samsung_manual_update(struct samsung_pwm_chip *chip, | |
| struct pwm_device *pwm) | |
| { | |
| unsigned int tcon_chan = to_tcon_channel(pwm->hwpwm); | |
| u32 tcon; | |
| unsigned long flags; | |
| spin_lock_irqsave(&samsung_pwm_lock, flags); | |
| tcon = readl(chip->base + REG_TCON); | |
| tcon |= TCON_MANUALUPDATE(tcon_chan); | |
| writel(tcon, chip->base + REG_TCON); | |
| tcon &= ~TCON_MANUALUPDATE(tcon_chan); | |
| writel(tcon, chip->base + REG_TCON); | |
| spin_unlock_irqrestore(&samsung_pwm_lock, flags); | |
| } | |
| static int pwm_samsung_config(struct pwm_chip *chip, struct pwm_device *pwm, | |
| int duty_ns, int period_ns) | |
| { | |
| struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip); | |
| struct samsung_pwm_channel *chan = pwm_get_chip_data(pwm); | |
| u32 tin_ns = chan->tin_ns, tcnt, tcmp, oldtcmp; | |
| /* | |
| * We currently avoid using 64bit arithmetic by using the | |
| * fact that anything faster than 1Hz is easily representable | |
| * by 32bits. | |
| */ | |
| if (period_ns > NSEC_PER_SEC) | |
| return -ERANGE; | |
| if (period_ns == chan->period_ns && duty_ns == chan->duty_ns) | |
| return 0; | |
| tcnt = readl(our_chip->base + REG_TCNTB(pwm->hwpwm)); | |
| oldtcmp = readl(our_chip->base + REG_TCMPB(pwm->hwpwm)); | |
| /* We need tick count for calculation, not last tick. */ | |
| ++tcnt; | |
| /* Check to see if we are changing the clock rate of the PWM. */ | |
| if (chan->period_ns != period_ns) { | |
| unsigned long tin_rate; | |
| u32 period; | |
| period = NSEC_PER_SEC / period_ns; | |
| dev_dbg(our_chip->chip.dev, "duty_ns=%d, period_ns=%d (%u)\n", | |
| duty_ns, period_ns, period); | |
| tin_rate = pwm_samsung_calc_tin(our_chip, pwm->hwpwm, period); | |
| dev_dbg(our_chip->chip.dev, "tin_rate=%lu\n", tin_rate); | |
| tin_ns = NSEC_PER_SEC / tin_rate; | |
| tcnt = period_ns / tin_ns; | |
| } | |
| /* Period is too short. */ | |
| if (tcnt <= 1) | |
| return -ERANGE; | |
| /* Note that counters count down. */ | |
| tcmp = duty_ns / tin_ns; | |
| /* 0% duty is not available */ | |
| if (!tcmp) | |
| ++tcmp; | |
| tcmp = tcnt - tcmp; | |
| /* Decrement to get tick numbers, instead of tick counts. */ | |
| --tcnt; | |
| /* -1UL will give 100% duty. */ | |
| --tcmp; | |
| dev_dbg(our_chip->chip.dev, | |
| "tin_ns=%u, tcmp=%u/%u\n", tin_ns, tcmp, tcnt); | |
| /* Update PWM registers. */ | |
| writel(tcnt, our_chip->base + REG_TCNTB(pwm->hwpwm)); | |
| writel(tcmp, our_chip->base + REG_TCMPB(pwm->hwpwm)); | |
| /* | |
| * In case the PWM is currently at 100% duty cycle, force a manual | |
| * update to prevent the signal staying high if the PWM is disabled | |
| * shortly afer this update (before it autoreloaded the new values). | |
| */ | |
| if (oldtcmp == (u32) -1) { | |
| dev_dbg(our_chip->chip.dev, "Forcing manual update"); | |
| pwm_samsung_manual_update(our_chip, pwm); | |
| } | |
| chan->period_ns = period_ns; | |
| chan->tin_ns = tin_ns; | |
| chan->duty_ns = duty_ns; | |
| return 0; | |
| } | |
| static void pwm_samsung_set_invert(struct samsung_pwm_chip *chip, | |
| unsigned int channel, bool invert) | |
| { | |
| unsigned int tcon_chan = to_tcon_channel(channel); | |
| unsigned long flags; | |
| u32 tcon; | |
| spin_lock_irqsave(&samsung_pwm_lock, flags); | |
| tcon = readl(chip->base + REG_TCON); | |
| if (invert) { | |
| chip->inverter_mask |= BIT(channel); | |
| tcon |= TCON_INVERT(tcon_chan); | |
| } else { | |
| chip->inverter_mask &= ~BIT(channel); | |
| tcon &= ~TCON_INVERT(tcon_chan); | |
| } | |
| writel(tcon, chip->base + REG_TCON); | |
| spin_unlock_irqrestore(&samsung_pwm_lock, flags); | |
| } | |
| static int pwm_samsung_set_polarity(struct pwm_chip *chip, | |
| struct pwm_device *pwm, | |
| enum pwm_polarity polarity) | |
| { | |
| struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip); | |
| bool invert = (polarity == PWM_POLARITY_NORMAL); | |
| /* Inverted means normal in the hardware. */ | |
| pwm_samsung_set_invert(our_chip, pwm->hwpwm, invert); | |
| return 0; | |
| } | |
| static const struct pwm_ops pwm_samsung_ops = { | |
| .request = pwm_samsung_request, | |
| .free = pwm_samsung_free, | |
| .enable = pwm_samsung_enable, | |
| .disable = pwm_samsung_disable, | |
| .config = pwm_samsung_config, | |
| .set_polarity = pwm_samsung_set_polarity, | |
| .owner = THIS_MODULE, | |
| }; | |
| #ifdef CONFIG_OF | |
| static const struct samsung_pwm_variant s3c24xx_variant = { | |
| .bits = 16, | |
| .div_base = 1, | |
| .has_tint_cstat = false, | |
| .tclk_mask = BIT(4), | |
| }; | |
| static const struct samsung_pwm_variant s3c64xx_variant = { | |
| .bits = 32, | |
| .div_base = 0, | |
| .has_tint_cstat = true, | |
| .tclk_mask = BIT(7) | BIT(6) | BIT(5), | |
| }; | |
| static const struct samsung_pwm_variant s5p64x0_variant = { | |
| .bits = 32, | |
| .div_base = 0, | |
| .has_tint_cstat = true, | |
| .tclk_mask = 0, | |
| }; | |
| static const struct samsung_pwm_variant s5pc100_variant = { | |
| .bits = 32, | |
| .div_base = 0, | |
| .has_tint_cstat = true, | |
| .tclk_mask = BIT(5), | |
| }; | |
| static const struct of_device_id samsung_pwm_matches[] = { | |
| { .compatible = "samsung,s3c2410-pwm", .data = &s3c24xx_variant }, | |
| { .compatible = "samsung,s3c6400-pwm", .data = &s3c64xx_variant }, | |
| { .compatible = "samsung,s5p6440-pwm", .data = &s5p64x0_variant }, | |
| { .compatible = "samsung,s5pc100-pwm", .data = &s5pc100_variant }, | |
| { .compatible = "samsung,exynos4210-pwm", .data = &s5p64x0_variant }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, samsung_pwm_matches); | |
| static int pwm_samsung_parse_dt(struct samsung_pwm_chip *chip) | |
| { | |
| struct device_node *np = chip->chip.dev->of_node; | |
| const struct of_device_id *match; | |
| struct property *prop; | |
| const __be32 *cur; | |
| u32 val; | |
| match = of_match_node(samsung_pwm_matches, np); | |
| if (!match) | |
| return -ENODEV; | |
| memcpy(&chip->variant, match->data, sizeof(chip->variant)); | |
| of_property_for_each_u32(np, "samsung,pwm-outputs", prop, cur, val) { | |
| if (val >= SAMSUNG_PWM_NUM) { | |
| dev_err(chip->chip.dev, | |
| "%s: invalid channel index in samsung,pwm-outputs property\n", | |
| __func__); | |
| continue; | |
| } | |
| chip->variant.output_mask |= BIT(val); | |
| } | |
| return 0; | |
| } | |
| #else | |
| static int pwm_samsung_parse_dt(struct samsung_pwm_chip *chip) | |
| { | |
| return -ENODEV; | |
| } | |
| #endif | |
| static int pwm_samsung_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct samsung_pwm_chip *chip; | |
| struct resource *res; | |
| unsigned int chan; | |
| int ret; | |
| chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL); | |
| if (chip == NULL) | |
| return -ENOMEM; | |
| chip->chip.dev = &pdev->dev; | |
| chip->chip.ops = &pwm_samsung_ops; | |
| chip->chip.base = -1; | |
| chip->chip.npwm = SAMSUNG_PWM_NUM; | |
| chip->inverter_mask = BIT(SAMSUNG_PWM_NUM) - 1; | |
| if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) { | |
| ret = pwm_samsung_parse_dt(chip); | |
| if (ret) | |
| return ret; | |
| chip->chip.of_xlate = of_pwm_xlate_with_flags; | |
| chip->chip.of_pwm_n_cells = 3; | |
| } else { | |
| if (!pdev->dev.platform_data) { | |
| dev_err(&pdev->dev, "no platform data specified\n"); | |
| return -EINVAL; | |
| } | |
| memcpy(&chip->variant, pdev->dev.platform_data, | |
| sizeof(chip->variant)); | |
| } | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| chip->base = devm_ioremap_resource(&pdev->dev, res); | |
| if (IS_ERR(chip->base)) | |
| return PTR_ERR(chip->base); | |
| chip->base_clk = devm_clk_get(&pdev->dev, "timers"); | |
| if (IS_ERR(chip->base_clk)) { | |
| dev_err(dev, "failed to get timer base clk\n"); | |
| return PTR_ERR(chip->base_clk); | |
| } | |
| ret = clk_prepare_enable(chip->base_clk); | |
| if (ret < 0) { | |
| dev_err(dev, "failed to enable base clock\n"); | |
| return ret; | |
| } | |
| for (chan = 0; chan < SAMSUNG_PWM_NUM; ++chan) | |
| if (chip->variant.output_mask & BIT(chan)) | |
| pwm_samsung_set_invert(chip, chan, true); | |
| /* Following clocks are optional. */ | |
| chip->tclk0 = devm_clk_get(&pdev->dev, "pwm-tclk0"); | |
| chip->tclk1 = devm_clk_get(&pdev->dev, "pwm-tclk1"); | |
| platform_set_drvdata(pdev, chip); | |
| ret = pwmchip_add(&chip->chip); | |
| if (ret < 0) { | |
| dev_err(dev, "failed to register PWM chip\n"); | |
| clk_disable_unprepare(chip->base_clk); | |
| return ret; | |
| } | |
| dev_dbg(dev, "base_clk at %lu, tclk0 at %lu, tclk1 at %lu\n", | |
| clk_get_rate(chip->base_clk), | |
| !IS_ERR(chip->tclk0) ? clk_get_rate(chip->tclk0) : 0, | |
| !IS_ERR(chip->tclk1) ? clk_get_rate(chip->tclk1) : 0); | |
| return 0; | |
| } | |
| static int pwm_samsung_remove(struct platform_device *pdev) | |
| { | |
| struct samsung_pwm_chip *chip = platform_get_drvdata(pdev); | |
| int ret; | |
| ret = pwmchip_remove(&chip->chip); | |
| if (ret < 0) | |
| return ret; | |
| clk_disable_unprepare(chip->base_clk); | |
| return 0; | |
| } | |
| #ifdef CONFIG_PM_SLEEP | |
| static int pwm_samsung_suspend(struct device *dev) | |
| { | |
| struct samsung_pwm_chip *chip = dev_get_drvdata(dev); | |
| unsigned int i; | |
| /* | |
| * No one preserves these values during suspend so reset them. | |
| * Otherwise driver leaves PWM unconfigured if same values are | |
| * passed to pwm_config() next time. | |
| */ | |
| for (i = 0; i < SAMSUNG_PWM_NUM; ++i) { | |
| struct pwm_device *pwm = &chip->chip.pwms[i]; | |
| struct samsung_pwm_channel *chan = pwm_get_chip_data(pwm); | |
| if (!chan) | |
| continue; | |
| chan->period_ns = 0; | |
| chan->duty_ns = 0; | |
| } | |
| return 0; | |
| } | |
| static int pwm_samsung_resume(struct device *dev) | |
| { | |
| struct samsung_pwm_chip *chip = dev_get_drvdata(dev); | |
| unsigned int chan; | |
| /* | |
| * Inverter setting must be preserved across suspend/resume | |
| * as nobody really seems to configure it more than once. | |
| */ | |
| for (chan = 0; chan < SAMSUNG_PWM_NUM; ++chan) { | |
| if (chip->variant.output_mask & BIT(chan)) | |
| pwm_samsung_set_invert(chip, chan, | |
| chip->inverter_mask & BIT(chan)); | |
| } | |
| return 0; | |
| } | |
| #endif | |
| static SIMPLE_DEV_PM_OPS(pwm_samsung_pm_ops, pwm_samsung_suspend, | |
| pwm_samsung_resume); | |
| static struct platform_driver pwm_samsung_driver = { | |
| .driver = { | |
| .name = "samsung-pwm", | |
| .pm = &pwm_samsung_pm_ops, | |
| .of_match_table = of_match_ptr(samsung_pwm_matches), | |
| }, | |
| .probe = pwm_samsung_probe, | |
| .remove = pwm_samsung_remove, | |
| }; | |
| module_platform_driver(pwm_samsung_driver); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_AUTHOR("Tomasz Figa <tomasz.figa@gmail.com>"); | |
| MODULE_ALIAS("platform:samsung-pwm"); |