| /* | |
| * RapidIO mport driver for Tsi721 PCIExpress-to-SRIO bridge | |
| * | |
| * Copyright 2011 Integrated Device Technology, Inc. | |
| * Alexandre Bounine <alexandre.bounine@idt.com> | |
| * Chul Kim <chul.kim@idt.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the Free | |
| * Software Foundation; either version 2 of the License, or (at your option) | |
| * any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, but WITHOUT | |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
| * more details. | |
| * | |
| * You should have received a copy of the GNU General Public License along with | |
| * this program; if not, write to the Free Software Foundation, Inc., 59 | |
| * Temple Place - Suite 330, Boston, MA 02111-1307, USA. | |
| */ | |
| #include <linux/io.h> | |
| #include <linux/errno.h> | |
| #include <linux/init.h> | |
| #include <linux/ioport.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/pci.h> | |
| #include <linux/rio.h> | |
| #include <linux/rio_drv.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/kfifo.h> | |
| #include <linux/delay.h> | |
| #include "tsi721.h" | |
| #ifdef DEBUG | |
| u32 dbg_level; | |
| module_param(dbg_level, uint, S_IWUSR | S_IRUGO); | |
| MODULE_PARM_DESC(dbg_level, "Debugging output level (default 0 = none)"); | |
| #endif | |
| static int pcie_mrrs = -1; | |
| module_param(pcie_mrrs, int, S_IRUGO); | |
| MODULE_PARM_DESC(pcie_mrrs, "PCIe MRRS override value (0...5)"); | |
| static u8 mbox_sel = 0x0f; | |
| module_param(mbox_sel, byte, S_IRUGO); | |
| MODULE_PARM_DESC(mbox_sel, | |
| "RIO Messaging MBOX Selection Mask (default: 0x0f = all)"); | |
| static void tsi721_omsg_handler(struct tsi721_device *priv, int ch); | |
| static void tsi721_imsg_handler(struct tsi721_device *priv, int ch); | |
| /** | |
| * tsi721_lcread - read from local SREP config space | |
| * @mport: RapidIO master port info | |
| * @index: ID of RapdiIO interface | |
| * @offset: Offset into configuration space | |
| * @len: Length (in bytes) of the maintenance transaction | |
| * @data: Value to be read into | |
| * | |
| * Generates a local SREP space read. Returns %0 on | |
| * success or %-EINVAL on failure. | |
| */ | |
| static int tsi721_lcread(struct rio_mport *mport, int index, u32 offset, | |
| int len, u32 *data) | |
| { | |
| struct tsi721_device *priv = mport->priv; | |
| if (len != sizeof(u32)) | |
| return -EINVAL; /* only 32-bit access is supported */ | |
| *data = ioread32(priv->regs + offset); | |
| return 0; | |
| } | |
| /** | |
| * tsi721_lcwrite - write into local SREP config space | |
| * @mport: RapidIO master port info | |
| * @index: ID of RapdiIO interface | |
| * @offset: Offset into configuration space | |
| * @len: Length (in bytes) of the maintenance transaction | |
| * @data: Value to be written | |
| * | |
| * Generates a local write into SREP configuration space. Returns %0 on | |
| * success or %-EINVAL on failure. | |
| */ | |
| static int tsi721_lcwrite(struct rio_mport *mport, int index, u32 offset, | |
| int len, u32 data) | |
| { | |
| struct tsi721_device *priv = mport->priv; | |
| if (len != sizeof(u32)) | |
| return -EINVAL; /* only 32-bit access is supported */ | |
| iowrite32(data, priv->regs + offset); | |
| return 0; | |
| } | |
| /** | |
| * tsi721_maint_dma - Helper function to generate RapidIO maintenance | |
| * transactions using designated Tsi721 DMA channel. | |
| * @priv: pointer to tsi721 private data | |
| * @sys_size: RapdiIO transport system size | |
| * @destid: Destination ID of transaction | |
| * @hopcount: Number of hops to target device | |
| * @offset: Offset into configuration space | |
| * @len: Length (in bytes) of the maintenance transaction | |
| * @data: Location to be read from or write into | |
| * @do_wr: Operation flag (1 == MAINT_WR) | |
| * | |
| * Generates a RapidIO maintenance transaction (Read or Write). | |
| * Returns %0 on success and %-EINVAL or %-EFAULT on failure. | |
| */ | |
| static int tsi721_maint_dma(struct tsi721_device *priv, u32 sys_size, | |
| u16 destid, u8 hopcount, u32 offset, int len, | |
| u32 *data, int do_wr) | |
| { | |
| void __iomem *regs = priv->regs + TSI721_DMAC_BASE(priv->mdma.ch_id); | |
| struct tsi721_dma_desc *bd_ptr; | |
| u32 rd_count, swr_ptr, ch_stat; | |
| int i, err = 0; | |
| u32 op = do_wr ? MAINT_WR : MAINT_RD; | |
| if (offset > (RIO_MAINT_SPACE_SZ - len) || (len != sizeof(u32))) | |
| return -EINVAL; | |
| bd_ptr = priv->mdma.bd_base; | |
| rd_count = ioread32(regs + TSI721_DMAC_DRDCNT); | |
| /* Initialize DMA descriptor */ | |
| bd_ptr[0].type_id = cpu_to_le32((DTYPE2 << 29) | (op << 19) | destid); | |
| bd_ptr[0].bcount = cpu_to_le32((sys_size << 26) | 0x04); | |
| bd_ptr[0].raddr_lo = cpu_to_le32((hopcount << 24) | offset); | |
| bd_ptr[0].raddr_hi = 0; | |
| if (do_wr) | |
| bd_ptr[0].data[0] = cpu_to_be32p(data); | |
| else | |
| bd_ptr[0].data[0] = 0xffffffff; | |
| mb(); | |
| /* Start DMA operation */ | |
| iowrite32(rd_count + 2, regs + TSI721_DMAC_DWRCNT); | |
| ioread32(regs + TSI721_DMAC_DWRCNT); | |
| i = 0; | |
| /* Wait until DMA transfer is finished */ | |
| while ((ch_stat = ioread32(regs + TSI721_DMAC_STS)) | |
| & TSI721_DMAC_STS_RUN) { | |
| udelay(1); | |
| if (++i >= 5000000) { | |
| tsi_debug(MAINT, &priv->pdev->dev, | |
| "DMA[%d] read timeout ch_status=%x", | |
| priv->mdma.ch_id, ch_stat); | |
| if (!do_wr) | |
| *data = 0xffffffff; | |
| err = -EIO; | |
| goto err_out; | |
| } | |
| } | |
| if (ch_stat & TSI721_DMAC_STS_ABORT) { | |
| /* If DMA operation aborted due to error, | |
| * reinitialize DMA channel | |
| */ | |
| tsi_debug(MAINT, &priv->pdev->dev, "DMA ABORT ch_stat=%x", | |
| ch_stat); | |
| tsi_debug(MAINT, &priv->pdev->dev, | |
| "OP=%d : destid=%x hc=%x off=%x", | |
| do_wr ? MAINT_WR : MAINT_RD, | |
| destid, hopcount, offset); | |
| iowrite32(TSI721_DMAC_INT_ALL, regs + TSI721_DMAC_INT); | |
| iowrite32(TSI721_DMAC_CTL_INIT, regs + TSI721_DMAC_CTL); | |
| udelay(10); | |
| iowrite32(0, regs + TSI721_DMAC_DWRCNT); | |
| udelay(1); | |
| if (!do_wr) | |
| *data = 0xffffffff; | |
| err = -EIO; | |
| goto err_out; | |
| } | |
| if (!do_wr) | |
| *data = be32_to_cpu(bd_ptr[0].data[0]); | |
| /* | |
| * Update descriptor status FIFO RD pointer. | |
| * NOTE: Skipping check and clear FIFO entries because we are waiting | |
| * for transfer to be completed. | |
| */ | |
| swr_ptr = ioread32(regs + TSI721_DMAC_DSWP); | |
| iowrite32(swr_ptr, regs + TSI721_DMAC_DSRP); | |
| err_out: | |
| return err; | |
| } | |
| /** | |
| * tsi721_cread_dma - Generate a RapidIO maintenance read transaction | |
| * using Tsi721 BDMA engine. | |
| * @mport: RapidIO master port control structure | |
| * @index: ID of RapdiIO interface | |
| * @destid: Destination ID of transaction | |
| * @hopcount: Number of hops to target device | |
| * @offset: Offset into configuration space | |
| * @len: Length (in bytes) of the maintenance transaction | |
| * @val: Location to be read into | |
| * | |
| * Generates a RapidIO maintenance read transaction. | |
| * Returns %0 on success and %-EINVAL or %-EFAULT on failure. | |
| */ | |
| static int tsi721_cread_dma(struct rio_mport *mport, int index, u16 destid, | |
| u8 hopcount, u32 offset, int len, u32 *data) | |
| { | |
| struct tsi721_device *priv = mport->priv; | |
| return tsi721_maint_dma(priv, mport->sys_size, destid, hopcount, | |
| offset, len, data, 0); | |
| } | |
| /** | |
| * tsi721_cwrite_dma - Generate a RapidIO maintenance write transaction | |
| * using Tsi721 BDMA engine | |
| * @mport: RapidIO master port control structure | |
| * @index: ID of RapdiIO interface | |
| * @destid: Destination ID of transaction | |
| * @hopcount: Number of hops to target device | |
| * @offset: Offset into configuration space | |
| * @len: Length (in bytes) of the maintenance transaction | |
| * @val: Value to be written | |
| * | |
| * Generates a RapidIO maintenance write transaction. | |
| * Returns %0 on success and %-EINVAL or %-EFAULT on failure. | |
| */ | |
| static int tsi721_cwrite_dma(struct rio_mport *mport, int index, u16 destid, | |
| u8 hopcount, u32 offset, int len, u32 data) | |
| { | |
| struct tsi721_device *priv = mport->priv; | |
| u32 temp = data; | |
| return tsi721_maint_dma(priv, mport->sys_size, destid, hopcount, | |
| offset, len, &temp, 1); | |
| } | |
| /** | |
| * tsi721_pw_handler - Tsi721 inbound port-write interrupt handler | |
| * @priv: tsi721 device private structure | |
| * | |
| * Handles inbound port-write interrupts. Copies PW message from an internal | |
| * buffer into PW message FIFO and schedules deferred routine to process | |
| * queued messages. | |
| */ | |
| static int | |
| tsi721_pw_handler(struct tsi721_device *priv) | |
| { | |
| u32 pw_stat; | |
| u32 pw_buf[TSI721_RIO_PW_MSG_SIZE/sizeof(u32)]; | |
| pw_stat = ioread32(priv->regs + TSI721_RIO_PW_RX_STAT); | |
| if (pw_stat & TSI721_RIO_PW_RX_STAT_PW_VAL) { | |
| pw_buf[0] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(0)); | |
| pw_buf[1] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(1)); | |
| pw_buf[2] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(2)); | |
| pw_buf[3] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(3)); | |
| /* Queue PW message (if there is room in FIFO), | |
| * otherwise discard it. | |
| */ | |
| spin_lock(&priv->pw_fifo_lock); | |
| if (kfifo_avail(&priv->pw_fifo) >= TSI721_RIO_PW_MSG_SIZE) | |
| kfifo_in(&priv->pw_fifo, pw_buf, | |
| TSI721_RIO_PW_MSG_SIZE); | |
| else | |
| priv->pw_discard_count++; | |
| spin_unlock(&priv->pw_fifo_lock); | |
| } | |
| /* Clear pending PW interrupts */ | |
| iowrite32(TSI721_RIO_PW_RX_STAT_PW_DISC | TSI721_RIO_PW_RX_STAT_PW_VAL, | |
| priv->regs + TSI721_RIO_PW_RX_STAT); | |
| schedule_work(&priv->pw_work); | |
| return 0; | |
| } | |
| static void tsi721_pw_dpc(struct work_struct *work) | |
| { | |
| struct tsi721_device *priv = container_of(work, struct tsi721_device, | |
| pw_work); | |
| union rio_pw_msg pwmsg; | |
| /* | |
| * Process port-write messages | |
| */ | |
| while (kfifo_out_spinlocked(&priv->pw_fifo, (unsigned char *)&pwmsg, | |
| TSI721_RIO_PW_MSG_SIZE, &priv->pw_fifo_lock)) { | |
| /* Pass the port-write message to RIO core for processing */ | |
| rio_inb_pwrite_handler(&priv->mport, &pwmsg); | |
| } | |
| } | |
| /** | |
| * tsi721_pw_enable - enable/disable port-write interface init | |
| * @mport: Master port implementing the port write unit | |
| * @enable: 1=enable; 0=disable port-write message handling | |
| */ | |
| static int tsi721_pw_enable(struct rio_mport *mport, int enable) | |
| { | |
| struct tsi721_device *priv = mport->priv; | |
| u32 rval; | |
| rval = ioread32(priv->regs + TSI721_RIO_EM_INT_ENABLE); | |
| if (enable) | |
| rval |= TSI721_RIO_EM_INT_ENABLE_PW_RX; | |
| else | |
| rval &= ~TSI721_RIO_EM_INT_ENABLE_PW_RX; | |
| /* Clear pending PW interrupts */ | |
| iowrite32(TSI721_RIO_PW_RX_STAT_PW_DISC | TSI721_RIO_PW_RX_STAT_PW_VAL, | |
| priv->regs + TSI721_RIO_PW_RX_STAT); | |
| /* Update enable bits */ | |
| iowrite32(rval, priv->regs + TSI721_RIO_EM_INT_ENABLE); | |
| return 0; | |
| } | |
| /** | |
| * tsi721_dsend - Send a RapidIO doorbell | |
| * @mport: RapidIO master port info | |
| * @index: ID of RapidIO interface | |
| * @destid: Destination ID of target device | |
| * @data: 16-bit info field of RapidIO doorbell | |
| * | |
| * Sends a RapidIO doorbell message. Always returns %0. | |
| */ | |
| static int tsi721_dsend(struct rio_mport *mport, int index, | |
| u16 destid, u16 data) | |
| { | |
| struct tsi721_device *priv = mport->priv; | |
| u32 offset; | |
| offset = (((mport->sys_size) ? RIO_TT_CODE_16 : RIO_TT_CODE_8) << 18) | | |
| (destid << 2); | |
| tsi_debug(DBELL, &priv->pdev->dev, | |
| "Send Doorbell 0x%04x to destID 0x%x", data, destid); | |
| iowrite16be(data, priv->odb_base + offset); | |
| return 0; | |
| } | |
| /** | |
| * tsi721_dbell_handler - Tsi721 doorbell interrupt handler | |
| * @priv: tsi721 device-specific data structure | |
| * | |
| * Handles inbound doorbell interrupts. Copies doorbell entry from an internal | |
| * buffer into DB message FIFO and schedules deferred routine to process | |
| * queued DBs. | |
| */ | |
| static int | |
| tsi721_dbell_handler(struct tsi721_device *priv) | |
| { | |
| u32 regval; | |
| /* Disable IDB interrupts */ | |
| regval = ioread32(priv->regs + TSI721_SR_CHINTE(IDB_QUEUE)); | |
| regval &= ~TSI721_SR_CHINT_IDBQRCV; | |
| iowrite32(regval, | |
| priv->regs + TSI721_SR_CHINTE(IDB_QUEUE)); | |
| schedule_work(&priv->idb_work); | |
| return 0; | |
| } | |
| static void tsi721_db_dpc(struct work_struct *work) | |
| { | |
| struct tsi721_device *priv = container_of(work, struct tsi721_device, | |
| idb_work); | |
| struct rio_mport *mport; | |
| struct rio_dbell *dbell; | |
| int found = 0; | |
| u32 wr_ptr, rd_ptr; | |
| u64 *idb_entry; | |
| u32 regval; | |
| union { | |
| u64 msg; | |
| u8 bytes[8]; | |
| } idb; | |
| /* | |
| * Process queued inbound doorbells | |
| */ | |
| mport = &priv->mport; | |
| wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE; | |
| rd_ptr = ioread32(priv->regs + TSI721_IDQ_RP(IDB_QUEUE)) % IDB_QSIZE; | |
| while (wr_ptr != rd_ptr) { | |
| idb_entry = (u64 *)(priv->idb_base + | |
| (TSI721_IDB_ENTRY_SIZE * rd_ptr)); | |
| rd_ptr++; | |
| rd_ptr %= IDB_QSIZE; | |
| idb.msg = *idb_entry; | |
| *idb_entry = 0; | |
| /* Process one doorbell */ | |
| list_for_each_entry(dbell, &mport->dbells, node) { | |
| if ((dbell->res->start <= DBELL_INF(idb.bytes)) && | |
| (dbell->res->end >= DBELL_INF(idb.bytes))) { | |
| found = 1; | |
| break; | |
| } | |
| } | |
| if (found) { | |
| dbell->dinb(mport, dbell->dev_id, DBELL_SID(idb.bytes), | |
| DBELL_TID(idb.bytes), DBELL_INF(idb.bytes)); | |
| } else { | |
| tsi_debug(DBELL, &priv->pdev->dev, | |
| "spurious IDB sid %2.2x tid %2.2x info %4.4x", | |
| DBELL_SID(idb.bytes), DBELL_TID(idb.bytes), | |
| DBELL_INF(idb.bytes)); | |
| } | |
| wr_ptr = ioread32(priv->regs + | |
| TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE; | |
| } | |
| iowrite32(rd_ptr & (IDB_QSIZE - 1), | |
| priv->regs + TSI721_IDQ_RP(IDB_QUEUE)); | |
| /* Re-enable IDB interrupts */ | |
| regval = ioread32(priv->regs + TSI721_SR_CHINTE(IDB_QUEUE)); | |
| regval |= TSI721_SR_CHINT_IDBQRCV; | |
| iowrite32(regval, | |
| priv->regs + TSI721_SR_CHINTE(IDB_QUEUE)); | |
| wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE; | |
| if (wr_ptr != rd_ptr) | |
| schedule_work(&priv->idb_work); | |
| } | |
| /** | |
| * tsi721_irqhandler - Tsi721 interrupt handler | |
| * @irq: Linux interrupt number | |
| * @ptr: Pointer to interrupt-specific data (tsi721_device structure) | |
| * | |
| * Handles Tsi721 interrupts signaled using MSI and INTA. Checks reported | |
| * interrupt events and calls an event-specific handler(s). | |
| */ | |
| static irqreturn_t tsi721_irqhandler(int irq, void *ptr) | |
| { | |
| struct tsi721_device *priv = (struct tsi721_device *)ptr; | |
| u32 dev_int; | |
| u32 dev_ch_int; | |
| u32 intval; | |
| u32 ch_inte; | |
| /* For MSI mode disable all device-level interrupts */ | |
| if (priv->flags & TSI721_USING_MSI) | |
| iowrite32(0, priv->regs + TSI721_DEV_INTE); | |
| dev_int = ioread32(priv->regs + TSI721_DEV_INT); | |
| if (!dev_int) | |
| return IRQ_NONE; | |
| dev_ch_int = ioread32(priv->regs + TSI721_DEV_CHAN_INT); | |
| if (dev_int & TSI721_DEV_INT_SR2PC_CH) { | |
| /* Service SR2PC Channel interrupts */ | |
| if (dev_ch_int & TSI721_INT_SR2PC_CHAN(IDB_QUEUE)) { | |
| /* Service Inbound Doorbell interrupt */ | |
| intval = ioread32(priv->regs + | |
| TSI721_SR_CHINT(IDB_QUEUE)); | |
| if (intval & TSI721_SR_CHINT_IDBQRCV) | |
| tsi721_dbell_handler(priv); | |
| else | |
| tsi_info(&priv->pdev->dev, | |
| "Unsupported SR_CH_INT %x", intval); | |
| /* Clear interrupts */ | |
| iowrite32(intval, | |
| priv->regs + TSI721_SR_CHINT(IDB_QUEUE)); | |
| ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE)); | |
| } | |
| } | |
| if (dev_int & TSI721_DEV_INT_SMSG_CH) { | |
| int ch; | |
| /* | |
| * Service channel interrupts from Messaging Engine | |
| */ | |
| if (dev_ch_int & TSI721_INT_IMSG_CHAN_M) { /* Inbound Msg */ | |
| /* Disable signaled OB MSG Channel interrupts */ | |
| ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); | |
| ch_inte &= ~(dev_ch_int & TSI721_INT_IMSG_CHAN_M); | |
| iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE); | |
| /* | |
| * Process Inbound Message interrupt for each MBOX | |
| */ | |
| for (ch = 4; ch < RIO_MAX_MBOX + 4; ch++) { | |
| if (!(dev_ch_int & TSI721_INT_IMSG_CHAN(ch))) | |
| continue; | |
| tsi721_imsg_handler(priv, ch); | |
| } | |
| } | |
| if (dev_ch_int & TSI721_INT_OMSG_CHAN_M) { /* Outbound Msg */ | |
| /* Disable signaled OB MSG Channel interrupts */ | |
| ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); | |
| ch_inte &= ~(dev_ch_int & TSI721_INT_OMSG_CHAN_M); | |
| iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE); | |
| /* | |
| * Process Outbound Message interrupts for each MBOX | |
| */ | |
| for (ch = 0; ch < RIO_MAX_MBOX; ch++) { | |
| if (!(dev_ch_int & TSI721_INT_OMSG_CHAN(ch))) | |
| continue; | |
| tsi721_omsg_handler(priv, ch); | |
| } | |
| } | |
| } | |
| if (dev_int & TSI721_DEV_INT_SRIO) { | |
| /* Service SRIO MAC interrupts */ | |
| intval = ioread32(priv->regs + TSI721_RIO_EM_INT_STAT); | |
| if (intval & TSI721_RIO_EM_INT_STAT_PW_RX) | |
| tsi721_pw_handler(priv); | |
| } | |
| #ifdef CONFIG_RAPIDIO_DMA_ENGINE | |
| if (dev_int & TSI721_DEV_INT_BDMA_CH) { | |
| int ch; | |
| if (dev_ch_int & TSI721_INT_BDMA_CHAN_M) { | |
| tsi_debug(DMA, &priv->pdev->dev, | |
| "IRQ from DMA channel 0x%08x", dev_ch_int); | |
| for (ch = 0; ch < TSI721_DMA_MAXCH; ch++) { | |
| if (!(dev_ch_int & TSI721_INT_BDMA_CHAN(ch))) | |
| continue; | |
| tsi721_bdma_handler(&priv->bdma[ch]); | |
| } | |
| } | |
| } | |
| #endif | |
| /* For MSI mode re-enable device-level interrupts */ | |
| if (priv->flags & TSI721_USING_MSI) { | |
| dev_int = TSI721_DEV_INT_SR2PC_CH | TSI721_DEV_INT_SRIO | | |
| TSI721_DEV_INT_SMSG_CH | TSI721_DEV_INT_BDMA_CH; | |
| iowrite32(dev_int, priv->regs + TSI721_DEV_INTE); | |
| } | |
| return IRQ_HANDLED; | |
| } | |
| static void tsi721_interrupts_init(struct tsi721_device *priv) | |
| { | |
| u32 intr; | |
| /* Enable IDB interrupts */ | |
| iowrite32(TSI721_SR_CHINT_ALL, | |
| priv->regs + TSI721_SR_CHINT(IDB_QUEUE)); | |
| iowrite32(TSI721_SR_CHINT_IDBQRCV, | |
| priv->regs + TSI721_SR_CHINTE(IDB_QUEUE)); | |
| /* Enable SRIO MAC interrupts */ | |
| iowrite32(TSI721_RIO_EM_DEV_INT_EN_INT, | |
| priv->regs + TSI721_RIO_EM_DEV_INT_EN); | |
| /* Enable interrupts from channels in use */ | |
| #ifdef CONFIG_RAPIDIO_DMA_ENGINE | |
| intr = TSI721_INT_SR2PC_CHAN(IDB_QUEUE) | | |
| (TSI721_INT_BDMA_CHAN_M & | |
| ~TSI721_INT_BDMA_CHAN(TSI721_DMACH_MAINT)); | |
| #else | |
| intr = TSI721_INT_SR2PC_CHAN(IDB_QUEUE); | |
| #endif | |
| iowrite32(intr, priv->regs + TSI721_DEV_CHAN_INTE); | |
| if (priv->flags & TSI721_USING_MSIX) | |
| intr = TSI721_DEV_INT_SRIO; | |
| else | |
| intr = TSI721_DEV_INT_SR2PC_CH | TSI721_DEV_INT_SRIO | | |
| TSI721_DEV_INT_SMSG_CH | TSI721_DEV_INT_BDMA_CH; | |
| iowrite32(intr, priv->regs + TSI721_DEV_INTE); | |
| ioread32(priv->regs + TSI721_DEV_INTE); | |
| } | |
| #ifdef CONFIG_PCI_MSI | |
| /** | |
| * tsi721_omsg_msix - MSI-X interrupt handler for outbound messaging | |
| * @irq: Linux interrupt number | |
| * @ptr: Pointer to interrupt-specific data (tsi721_device structure) | |
| * | |
| * Handles outbound messaging interrupts signaled using MSI-X. | |
| */ | |
| static irqreturn_t tsi721_omsg_msix(int irq, void *ptr) | |
| { | |
| struct tsi721_device *priv = (struct tsi721_device *)ptr; | |
| int mbox; | |
| mbox = (irq - priv->msix[TSI721_VECT_OMB0_DONE].vector) % RIO_MAX_MBOX; | |
| tsi721_omsg_handler(priv, mbox); | |
| return IRQ_HANDLED; | |
| } | |
| /** | |
| * tsi721_imsg_msix - MSI-X interrupt handler for inbound messaging | |
| * @irq: Linux interrupt number | |
| * @ptr: Pointer to interrupt-specific data (tsi721_device structure) | |
| * | |
| * Handles inbound messaging interrupts signaled using MSI-X. | |
| */ | |
| static irqreturn_t tsi721_imsg_msix(int irq, void *ptr) | |
| { | |
| struct tsi721_device *priv = (struct tsi721_device *)ptr; | |
| int mbox; | |
| mbox = (irq - priv->msix[TSI721_VECT_IMB0_RCV].vector) % RIO_MAX_MBOX; | |
| tsi721_imsg_handler(priv, mbox + 4); | |
| return IRQ_HANDLED; | |
| } | |
| /** | |
| * tsi721_srio_msix - Tsi721 MSI-X SRIO MAC interrupt handler | |
| * @irq: Linux interrupt number | |
| * @ptr: Pointer to interrupt-specific data (tsi721_device structure) | |
| * | |
| * Handles Tsi721 interrupts from SRIO MAC. | |
| */ | |
| static irqreturn_t tsi721_srio_msix(int irq, void *ptr) | |
| { | |
| struct tsi721_device *priv = (struct tsi721_device *)ptr; | |
| u32 srio_int; | |
| /* Service SRIO MAC interrupts */ | |
| srio_int = ioread32(priv->regs + TSI721_RIO_EM_INT_STAT); | |
| if (srio_int & TSI721_RIO_EM_INT_STAT_PW_RX) | |
| tsi721_pw_handler(priv); | |
| return IRQ_HANDLED; | |
| } | |
| /** | |
| * tsi721_sr2pc_ch_msix - Tsi721 MSI-X SR2PC Channel interrupt handler | |
| * @irq: Linux interrupt number | |
| * @ptr: Pointer to interrupt-specific data (tsi721_device structure) | |
| * | |
| * Handles Tsi721 interrupts from SR2PC Channel. | |
| * NOTE: At this moment services only one SR2PC channel associated with inbound | |
| * doorbells. | |
| */ | |
| static irqreturn_t tsi721_sr2pc_ch_msix(int irq, void *ptr) | |
| { | |
| struct tsi721_device *priv = (struct tsi721_device *)ptr; | |
| u32 sr_ch_int; | |
| /* Service Inbound DB interrupt from SR2PC channel */ | |
| sr_ch_int = ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE)); | |
| if (sr_ch_int & TSI721_SR_CHINT_IDBQRCV) | |
| tsi721_dbell_handler(priv); | |
| /* Clear interrupts */ | |
| iowrite32(sr_ch_int, priv->regs + TSI721_SR_CHINT(IDB_QUEUE)); | |
| /* Read back to ensure that interrupt was cleared */ | |
| sr_ch_int = ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE)); | |
| return IRQ_HANDLED; | |
| } | |
| /** | |
| * tsi721_request_msix - register interrupt service for MSI-X mode. | |
| * @priv: tsi721 device-specific data structure | |
| * | |
| * Registers MSI-X interrupt service routines for interrupts that are active | |
| * immediately after mport initialization. Messaging interrupt service routines | |
| * should be registered during corresponding open requests. | |
| */ | |
| static int tsi721_request_msix(struct tsi721_device *priv) | |
| { | |
| int err = 0; | |
| err = request_irq(priv->msix[TSI721_VECT_IDB].vector, | |
| tsi721_sr2pc_ch_msix, 0, | |
| priv->msix[TSI721_VECT_IDB].irq_name, (void *)priv); | |
| if (err) | |
| return err; | |
| err = request_irq(priv->msix[TSI721_VECT_PWRX].vector, | |
| tsi721_srio_msix, 0, | |
| priv->msix[TSI721_VECT_PWRX].irq_name, (void *)priv); | |
| if (err) { | |
| free_irq(priv->msix[TSI721_VECT_IDB].vector, (void *)priv); | |
| return err; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * tsi721_enable_msix - Attempts to enable MSI-X support for Tsi721. | |
| * @priv: pointer to tsi721 private data | |
| * | |
| * Configures MSI-X support for Tsi721. Supports only an exact number | |
| * of requested vectors. | |
| */ | |
| static int tsi721_enable_msix(struct tsi721_device *priv) | |
| { | |
| struct msix_entry entries[TSI721_VECT_MAX]; | |
| int err; | |
| int i; | |
| entries[TSI721_VECT_IDB].entry = TSI721_MSIX_SR2PC_IDBQ_RCV(IDB_QUEUE); | |
| entries[TSI721_VECT_PWRX].entry = TSI721_MSIX_SRIO_MAC_INT; | |
| /* | |
| * Initialize MSI-X entries for Messaging Engine: | |
| * this driver supports four RIO mailboxes (inbound and outbound) | |
| * NOTE: Inbound message MBOX 0...4 use IB channels 4...7. Therefore | |
| * offset +4 is added to IB MBOX number. | |
| */ | |
| for (i = 0; i < RIO_MAX_MBOX; i++) { | |
| entries[TSI721_VECT_IMB0_RCV + i].entry = | |
| TSI721_MSIX_IMSG_DQ_RCV(i + 4); | |
| entries[TSI721_VECT_IMB0_INT + i].entry = | |
| TSI721_MSIX_IMSG_INT(i + 4); | |
| entries[TSI721_VECT_OMB0_DONE + i].entry = | |
| TSI721_MSIX_OMSG_DONE(i); | |
| entries[TSI721_VECT_OMB0_INT + i].entry = | |
| TSI721_MSIX_OMSG_INT(i); | |
| } | |
| #ifdef CONFIG_RAPIDIO_DMA_ENGINE | |
| /* | |
| * Initialize MSI-X entries for Block DMA Engine: | |
| * this driver supports XXX DMA channels | |
| * (one is reserved for SRIO maintenance transactions) | |
| */ | |
| for (i = 0; i < TSI721_DMA_CHNUM; i++) { | |
| entries[TSI721_VECT_DMA0_DONE + i].entry = | |
| TSI721_MSIX_DMACH_DONE(i); | |
| entries[TSI721_VECT_DMA0_INT + i].entry = | |
| TSI721_MSIX_DMACH_INT(i); | |
| } | |
| #endif /* CONFIG_RAPIDIO_DMA_ENGINE */ | |
| err = pci_enable_msix_exact(priv->pdev, entries, ARRAY_SIZE(entries)); | |
| if (err) { | |
| tsi_err(&priv->pdev->dev, | |
| "Failed to enable MSI-X (err=%d)", err); | |
| return err; | |
| } | |
| /* | |
| * Copy MSI-X vector information into tsi721 private structure | |
| */ | |
| priv->msix[TSI721_VECT_IDB].vector = entries[TSI721_VECT_IDB].vector; | |
| snprintf(priv->msix[TSI721_VECT_IDB].irq_name, IRQ_DEVICE_NAME_MAX, | |
| DRV_NAME "-idb@pci:%s", pci_name(priv->pdev)); | |
| priv->msix[TSI721_VECT_PWRX].vector = entries[TSI721_VECT_PWRX].vector; | |
| snprintf(priv->msix[TSI721_VECT_PWRX].irq_name, IRQ_DEVICE_NAME_MAX, | |
| DRV_NAME "-pwrx@pci:%s", pci_name(priv->pdev)); | |
| for (i = 0; i < RIO_MAX_MBOX; i++) { | |
| priv->msix[TSI721_VECT_IMB0_RCV + i].vector = | |
| entries[TSI721_VECT_IMB0_RCV + i].vector; | |
| snprintf(priv->msix[TSI721_VECT_IMB0_RCV + i].irq_name, | |
| IRQ_DEVICE_NAME_MAX, DRV_NAME "-imbr%d@pci:%s", | |
| i, pci_name(priv->pdev)); | |
| priv->msix[TSI721_VECT_IMB0_INT + i].vector = | |
| entries[TSI721_VECT_IMB0_INT + i].vector; | |
| snprintf(priv->msix[TSI721_VECT_IMB0_INT + i].irq_name, | |
| IRQ_DEVICE_NAME_MAX, DRV_NAME "-imbi%d@pci:%s", | |
| i, pci_name(priv->pdev)); | |
| priv->msix[TSI721_VECT_OMB0_DONE + i].vector = | |
| entries[TSI721_VECT_OMB0_DONE + i].vector; | |
| snprintf(priv->msix[TSI721_VECT_OMB0_DONE + i].irq_name, | |
| IRQ_DEVICE_NAME_MAX, DRV_NAME "-ombd%d@pci:%s", | |
| i, pci_name(priv->pdev)); | |
| priv->msix[TSI721_VECT_OMB0_INT + i].vector = | |
| entries[TSI721_VECT_OMB0_INT + i].vector; | |
| snprintf(priv->msix[TSI721_VECT_OMB0_INT + i].irq_name, | |
| IRQ_DEVICE_NAME_MAX, DRV_NAME "-ombi%d@pci:%s", | |
| i, pci_name(priv->pdev)); | |
| } | |
| #ifdef CONFIG_RAPIDIO_DMA_ENGINE | |
| for (i = 0; i < TSI721_DMA_CHNUM; i++) { | |
| priv->msix[TSI721_VECT_DMA0_DONE + i].vector = | |
| entries[TSI721_VECT_DMA0_DONE + i].vector; | |
| snprintf(priv->msix[TSI721_VECT_DMA0_DONE + i].irq_name, | |
| IRQ_DEVICE_NAME_MAX, DRV_NAME "-dmad%d@pci:%s", | |
| i, pci_name(priv->pdev)); | |
| priv->msix[TSI721_VECT_DMA0_INT + i].vector = | |
| entries[TSI721_VECT_DMA0_INT + i].vector; | |
| snprintf(priv->msix[TSI721_VECT_DMA0_INT + i].irq_name, | |
| IRQ_DEVICE_NAME_MAX, DRV_NAME "-dmai%d@pci:%s", | |
| i, pci_name(priv->pdev)); | |
| } | |
| #endif /* CONFIG_RAPIDIO_DMA_ENGINE */ | |
| return 0; | |
| } | |
| #endif /* CONFIG_PCI_MSI */ | |
| static int tsi721_request_irq(struct tsi721_device *priv) | |
| { | |
| int err; | |
| #ifdef CONFIG_PCI_MSI | |
| if (priv->flags & TSI721_USING_MSIX) | |
| err = tsi721_request_msix(priv); | |
| else | |
| #endif | |
| err = request_irq(priv->pdev->irq, tsi721_irqhandler, | |
| (priv->flags & TSI721_USING_MSI) ? 0 : IRQF_SHARED, | |
| DRV_NAME, (void *)priv); | |
| if (err) | |
| tsi_err(&priv->pdev->dev, | |
| "Unable to allocate interrupt, err=%d", err); | |
| return err; | |
| } | |
| static void tsi721_free_irq(struct tsi721_device *priv) | |
| { | |
| #ifdef CONFIG_PCI_MSI | |
| if (priv->flags & TSI721_USING_MSIX) { | |
| free_irq(priv->msix[TSI721_VECT_IDB].vector, (void *)priv); | |
| free_irq(priv->msix[TSI721_VECT_PWRX].vector, (void *)priv); | |
| } else | |
| #endif | |
| free_irq(priv->pdev->irq, (void *)priv); | |
| } | |
| static int | |
| tsi721_obw_alloc(struct tsi721_device *priv, struct tsi721_obw_bar *pbar, | |
| u32 size, int *win_id) | |
| { | |
| u64 win_base; | |
| u64 bar_base; | |
| u64 bar_end; | |
| u32 align; | |
| struct tsi721_ob_win *win; | |
| struct tsi721_ob_win *new_win = NULL; | |
| int new_win_idx = -1; | |
| int i = 0; | |
| bar_base = pbar->base; | |
| bar_end = bar_base + pbar->size; | |
| win_base = bar_base; | |
| align = size/TSI721_PC2SR_ZONES; | |
| while (i < TSI721_IBWIN_NUM) { | |
| for (i = 0; i < TSI721_IBWIN_NUM; i++) { | |
| if (!priv->ob_win[i].active) { | |
| if (new_win == NULL) { | |
| new_win = &priv->ob_win[i]; | |
| new_win_idx = i; | |
| } | |
| continue; | |
| } | |
| /* | |
| * If this window belongs to the current BAR check it | |
| * for overlap | |
| */ | |
| win = &priv->ob_win[i]; | |
| if (win->base >= bar_base && win->base < bar_end) { | |
| if (win_base < (win->base + win->size) && | |
| (win_base + size) > win->base) { | |
| /* Overlap detected */ | |
| win_base = win->base + win->size; | |
| win_base = ALIGN(win_base, align); | |
| break; | |
| } | |
| } | |
| } | |
| } | |
| if (win_base + size > bar_end) | |
| return -ENOMEM; | |
| if (!new_win) { | |
| tsi_err(&priv->pdev->dev, "OBW count tracking failed"); | |
| return -EIO; | |
| } | |
| new_win->active = true; | |
| new_win->base = win_base; | |
| new_win->size = size; | |
| new_win->pbar = pbar; | |
| priv->obwin_cnt--; | |
| pbar->free -= size; | |
| *win_id = new_win_idx; | |
| return 0; | |
| } | |
| static int tsi721_map_outb_win(struct rio_mport *mport, u16 destid, u64 rstart, | |
| u32 size, u32 flags, dma_addr_t *laddr) | |
| { | |
| struct tsi721_device *priv = mport->priv; | |
| int i; | |
| struct tsi721_obw_bar *pbar; | |
| struct tsi721_ob_win *ob_win; | |
| int obw = -1; | |
| u32 rval; | |
| u64 rio_addr; | |
| u32 zsize; | |
| int ret = -ENOMEM; | |
| tsi_debug(OBW, &priv->pdev->dev, | |
| "did=%d ra=0x%llx sz=0x%x", destid, rstart, size); | |
| if (!is_power_of_2(size) || (size < 0x8000) || (rstart & (size - 1))) | |
| return -EINVAL; | |
| if (priv->obwin_cnt == 0) | |
| return -EBUSY; | |
| for (i = 0; i < 2; i++) { | |
| if (priv->p2r_bar[i].free >= size) { | |
| pbar = &priv->p2r_bar[i]; | |
| ret = tsi721_obw_alloc(priv, pbar, size, &obw); | |
| if (!ret) | |
| break; | |
| } | |
| } | |
| if (ret) | |
| return ret; | |
| WARN_ON(obw == -1); | |
| ob_win = &priv->ob_win[obw]; | |
| ob_win->destid = destid; | |
| ob_win->rstart = rstart; | |
| tsi_debug(OBW, &priv->pdev->dev, | |
| "allocated OBW%d @%llx", obw, ob_win->base); | |
| /* | |
| * Configure Outbound Window | |
| */ | |
| zsize = size/TSI721_PC2SR_ZONES; | |
| rio_addr = rstart; | |
| /* | |
| * Program Address Translation Zones: | |
| * This implementation uses all 8 zones associated wit window. | |
| */ | |
| for (i = 0; i < TSI721_PC2SR_ZONES; i++) { | |
| while (ioread32(priv->regs + TSI721_ZONE_SEL) & | |
| TSI721_ZONE_SEL_GO) { | |
| udelay(1); | |
| } | |
| rval = (u32)(rio_addr & TSI721_LUT_DATA0_ADD) | | |
| TSI721_LUT_DATA0_NREAD | TSI721_LUT_DATA0_NWR; | |
| iowrite32(rval, priv->regs + TSI721_LUT_DATA0); | |
| rval = (u32)(rio_addr >> 32); | |
| iowrite32(rval, priv->regs + TSI721_LUT_DATA1); | |
| rval = destid; | |
| iowrite32(rval, priv->regs + TSI721_LUT_DATA2); | |
| rval = TSI721_ZONE_SEL_GO | (obw << 3) | i; | |
| iowrite32(rval, priv->regs + TSI721_ZONE_SEL); | |
| rio_addr += zsize; | |
| } | |
| iowrite32(TSI721_OBWIN_SIZE(size) << 8, | |
| priv->regs + TSI721_OBWINSZ(obw)); | |
| iowrite32((u32)(ob_win->base >> 32), priv->regs + TSI721_OBWINUB(obw)); | |
| iowrite32((u32)(ob_win->base & TSI721_OBWINLB_BA) | TSI721_OBWINLB_WEN, | |
| priv->regs + TSI721_OBWINLB(obw)); | |
| *laddr = ob_win->base; | |
| return 0; | |
| } | |
| static void tsi721_unmap_outb_win(struct rio_mport *mport, | |
| u16 destid, u64 rstart) | |
| { | |
| struct tsi721_device *priv = mport->priv; | |
| struct tsi721_ob_win *ob_win; | |
| int i; | |
| tsi_debug(OBW, &priv->pdev->dev, "did=%d ra=0x%llx", destid, rstart); | |
| for (i = 0; i < TSI721_OBWIN_NUM; i++) { | |
| ob_win = &priv->ob_win[i]; | |
| if (ob_win->active && | |
| ob_win->destid == destid && ob_win->rstart == rstart) { | |
| tsi_debug(OBW, &priv->pdev->dev, | |
| "free OBW%d @%llx", i, ob_win->base); | |
| ob_win->active = false; | |
| iowrite32(0, priv->regs + TSI721_OBWINLB(i)); | |
| ob_win->pbar->free += ob_win->size; | |
| priv->obwin_cnt++; | |
| break; | |
| } | |
| } | |
| } | |
| /** | |
| * tsi721_init_pc2sr_mapping - initializes outbound (PCIe->SRIO) | |
| * translation regions. | |
| * @priv: pointer to tsi721 private data | |
| * | |
| * Disables SREP translation regions. | |
| */ | |
| static void tsi721_init_pc2sr_mapping(struct tsi721_device *priv) | |
| { | |
| int i, z; | |
| u32 rval; | |
| /* Disable all PC2SR translation windows */ | |
| for (i = 0; i < TSI721_OBWIN_NUM; i++) | |
| iowrite32(0, priv->regs + TSI721_OBWINLB(i)); | |
| /* Initialize zone lookup tables to avoid ECC errors on reads */ | |
| iowrite32(0, priv->regs + TSI721_LUT_DATA0); | |
| iowrite32(0, priv->regs + TSI721_LUT_DATA1); | |
| iowrite32(0, priv->regs + TSI721_LUT_DATA2); | |
| for (i = 0; i < TSI721_OBWIN_NUM; i++) { | |
| for (z = 0; z < TSI721_PC2SR_ZONES; z++) { | |
| while (ioread32(priv->regs + TSI721_ZONE_SEL) & | |
| TSI721_ZONE_SEL_GO) { | |
| udelay(1); | |
| } | |
| rval = TSI721_ZONE_SEL_GO | (i << 3) | z; | |
| iowrite32(rval, priv->regs + TSI721_ZONE_SEL); | |
| } | |
| } | |
| if (priv->p2r_bar[0].size == 0 && priv->p2r_bar[1].size == 0) { | |
| priv->obwin_cnt = 0; | |
| return; | |
| } | |
| priv->p2r_bar[0].free = priv->p2r_bar[0].size; | |
| priv->p2r_bar[1].free = priv->p2r_bar[1].size; | |
| for (i = 0; i < TSI721_OBWIN_NUM; i++) | |
| priv->ob_win[i].active = false; | |
| priv->obwin_cnt = TSI721_OBWIN_NUM; | |
| } | |
| /** | |
| * tsi721_rio_map_inb_mem -- Mapping inbound memory region. | |
| * @mport: RapidIO master port | |
| * @lstart: Local memory space start address. | |
| * @rstart: RapidIO space start address. | |
| * @size: The mapping region size. | |
| * @flags: Flags for mapping. 0 for using default flags. | |
| * | |
| * Return: 0 -- Success. | |
| * | |
| * This function will create the inbound mapping | |
| * from rstart to lstart. | |
| */ | |
| static int tsi721_rio_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart, | |
| u64 rstart, u64 size, u32 flags) | |
| { | |
| struct tsi721_device *priv = mport->priv; | |
| int i, avail = -1; | |
| u32 regval; | |
| struct tsi721_ib_win *ib_win; | |
| bool direct = (lstart == rstart); | |
| u64 ibw_size; | |
| dma_addr_t loc_start; | |
| u64 ibw_start; | |
| struct tsi721_ib_win_mapping *map = NULL; | |
| int ret = -EBUSY; | |
| /* Max IBW size supported by HW is 16GB */ | |
| if (size > 0x400000000UL) | |
| return -EINVAL; | |
| if (direct) { | |
| /* Calculate minimal acceptable window size and base address */ | |
| ibw_size = roundup_pow_of_two(size); | |
| ibw_start = lstart & ~(ibw_size - 1); | |
| tsi_debug(IBW, &priv->pdev->dev, | |
| "Direct (RIO_0x%llx -> PCIe_%pad), size=0x%llx, ibw_start = 0x%llx", | |
| rstart, &lstart, size, ibw_start); | |
| while ((lstart + size) > (ibw_start + ibw_size)) { | |
| ibw_size *= 2; | |
| ibw_start = lstart & ~(ibw_size - 1); | |
| /* Check for crossing IBW max size 16GB */ | |
| if (ibw_size > 0x400000000UL) | |
| return -EBUSY; | |
| } | |
| loc_start = ibw_start; | |
| map = kzalloc(sizeof(struct tsi721_ib_win_mapping), GFP_ATOMIC); | |
| if (map == NULL) | |
| return -ENOMEM; | |
| } else { | |
| tsi_debug(IBW, &priv->pdev->dev, | |
| "Translated (RIO_0x%llx -> PCIe_%pad), size=0x%llx", | |
| rstart, &lstart, size); | |
| if (!is_power_of_2(size) || size < 0x1000 || | |
| ((u64)lstart & (size - 1)) || (rstart & (size - 1))) | |
| return -EINVAL; | |
| if (priv->ibwin_cnt == 0) | |
| return -EBUSY; | |
| ibw_start = rstart; | |
| ibw_size = size; | |
| loc_start = lstart; | |
| } | |
| /* | |
| * Scan for overlapping with active regions and mark the first available | |
| * IB window at the same time. | |
| */ | |
| for (i = 0; i < TSI721_IBWIN_NUM; i++) { | |
| ib_win = &priv->ib_win[i]; | |
| if (!ib_win->active) { | |
| if (avail == -1) { | |
| avail = i; | |
| ret = 0; | |
| } | |
| } else if (ibw_start < (ib_win->rstart + ib_win->size) && | |
| (ibw_start + ibw_size) > ib_win->rstart) { | |
| /* Return error if address translation involved */ | |
| if (!direct || ib_win->xlat) { | |
| ret = -EFAULT; | |
| break; | |
| } | |
| /* | |
| * Direct mappings usually are larger than originally | |
| * requested fragments - check if this new request fits | |
| * into it. | |
| */ | |
| if (rstart >= ib_win->rstart && | |
| (rstart + size) <= (ib_win->rstart + | |
| ib_win->size)) { | |
| /* We are in - no further mapping required */ | |
| map->lstart = lstart; | |
| list_add_tail(&map->node, &ib_win->mappings); | |
| return 0; | |
| } | |
| ret = -EFAULT; | |
| break; | |
| } | |
| } | |
| if (ret) | |
| goto out; | |
| i = avail; | |
| /* Sanity check: available IB window must be disabled at this point */ | |
| regval = ioread32(priv->regs + TSI721_IBWIN_LB(i)); | |
| if (WARN_ON(regval & TSI721_IBWIN_LB_WEN)) { | |
| ret = -EIO; | |
| goto out; | |
| } | |
| ib_win = &priv->ib_win[i]; | |
| ib_win->active = true; | |
| ib_win->rstart = ibw_start; | |
| ib_win->lstart = loc_start; | |
| ib_win->size = ibw_size; | |
| ib_win->xlat = (lstart != rstart); | |
| INIT_LIST_HEAD(&ib_win->mappings); | |
| /* | |
| * When using direct IBW mapping and have larger than requested IBW size | |
| * we can have multiple local memory blocks mapped through the same IBW | |
| * To handle this situation we maintain list of "clients" for such IBWs. | |
| */ | |
| if (direct) { | |
| map->lstart = lstart; | |
| list_add_tail(&map->node, &ib_win->mappings); | |
| } | |
| iowrite32(TSI721_IBWIN_SIZE(ibw_size) << 8, | |
| priv->regs + TSI721_IBWIN_SZ(i)); | |
| iowrite32(((u64)loc_start >> 32), priv->regs + TSI721_IBWIN_TUA(i)); | |
| iowrite32(((u64)loc_start & TSI721_IBWIN_TLA_ADD), | |
| priv->regs + TSI721_IBWIN_TLA(i)); | |
| iowrite32(ibw_start >> 32, priv->regs + TSI721_IBWIN_UB(i)); | |
| iowrite32((ibw_start & TSI721_IBWIN_LB_BA) | TSI721_IBWIN_LB_WEN, | |
| priv->regs + TSI721_IBWIN_LB(i)); | |
| priv->ibwin_cnt--; | |
| tsi_debug(IBW, &priv->pdev->dev, | |
| "Configured IBWIN%d (RIO_0x%llx -> PCIe_%pad), size=0x%llx", | |
| i, ibw_start, &loc_start, ibw_size); | |
| return 0; | |
| out: | |
| kfree(map); | |
| return ret; | |
| } | |
| /** | |
| * tsi721_rio_unmap_inb_mem -- Unmapping inbound memory region. | |
| * @mport: RapidIO master port | |
| * @lstart: Local memory space start address. | |
| */ | |
| static void tsi721_rio_unmap_inb_mem(struct rio_mport *mport, | |
| dma_addr_t lstart) | |
| { | |
| struct tsi721_device *priv = mport->priv; | |
| struct tsi721_ib_win *ib_win; | |
| int i; | |
| tsi_debug(IBW, &priv->pdev->dev, | |
| "Unmap IBW mapped to PCIe_%pad", &lstart); | |
| /* Search for matching active inbound translation window */ | |
| for (i = 0; i < TSI721_IBWIN_NUM; i++) { | |
| ib_win = &priv->ib_win[i]; | |
| /* Address translating IBWs must to be an exact march */ | |
| if (!ib_win->active || | |
| (ib_win->xlat && lstart != ib_win->lstart)) | |
| continue; | |
| if (lstart >= ib_win->lstart && | |
| lstart < (ib_win->lstart + ib_win->size)) { | |
| if (!ib_win->xlat) { | |
| struct tsi721_ib_win_mapping *map; | |
| int found = 0; | |
| list_for_each_entry(map, | |
| &ib_win->mappings, node) { | |
| if (map->lstart == lstart) { | |
| list_del(&map->node); | |
| kfree(map); | |
| found = 1; | |
| break; | |
| } | |
| } | |
| if (!found) | |
| continue; | |
| if (!list_empty(&ib_win->mappings)) | |
| break; | |
| } | |
| tsi_debug(IBW, &priv->pdev->dev, "Disable IBWIN_%d", i); | |
| iowrite32(0, priv->regs + TSI721_IBWIN_LB(i)); | |
| ib_win->active = false; | |
| priv->ibwin_cnt++; | |
| break; | |
| } | |
| } | |
| if (i == TSI721_IBWIN_NUM) | |
| tsi_debug(IBW, &priv->pdev->dev, | |
| "IB window mapped to %pad not found", &lstart); | |
| } | |
| /** | |
| * tsi721_init_sr2pc_mapping - initializes inbound (SRIO->PCIe) | |
| * translation regions. | |
| * @priv: pointer to tsi721 private data | |
| * | |
| * Disables inbound windows. | |
| */ | |
| static void tsi721_init_sr2pc_mapping(struct tsi721_device *priv) | |
| { | |
| int i; | |
| /* Disable all SR2PC inbound windows */ | |
| for (i = 0; i < TSI721_IBWIN_NUM; i++) | |
| iowrite32(0, priv->regs + TSI721_IBWIN_LB(i)); | |
| priv->ibwin_cnt = TSI721_IBWIN_NUM; | |
| } | |
| /* | |
| * tsi721_close_sr2pc_mapping - closes all active inbound (SRIO->PCIe) | |
| * translation regions. | |
| * @priv: pointer to tsi721 device private data | |
| */ | |
| static void tsi721_close_sr2pc_mapping(struct tsi721_device *priv) | |
| { | |
| struct tsi721_ib_win *ib_win; | |
| int i; | |
| /* Disable all active SR2PC inbound windows */ | |
| for (i = 0; i < TSI721_IBWIN_NUM; i++) { | |
| ib_win = &priv->ib_win[i]; | |
| if (ib_win->active) { | |
| iowrite32(0, priv->regs + TSI721_IBWIN_LB(i)); | |
| ib_win->active = false; | |
| } | |
| } | |
| } | |
| /** | |
| * tsi721_port_write_init - Inbound port write interface init | |
| * @priv: pointer to tsi721 private data | |
| * | |
| * Initializes inbound port write handler. | |
| * Returns %0 on success or %-ENOMEM on failure. | |
| */ | |
| static int tsi721_port_write_init(struct tsi721_device *priv) | |
| { | |
| priv->pw_discard_count = 0; | |
| INIT_WORK(&priv->pw_work, tsi721_pw_dpc); | |
| spin_lock_init(&priv->pw_fifo_lock); | |
| if (kfifo_alloc(&priv->pw_fifo, | |
| TSI721_RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) { | |
| tsi_err(&priv->pdev->dev, "PW FIFO allocation failed"); | |
| return -ENOMEM; | |
| } | |
| /* Use reliable port-write capture mode */ | |
| iowrite32(TSI721_RIO_PW_CTL_PWC_REL, priv->regs + TSI721_RIO_PW_CTL); | |
| return 0; | |
| } | |
| static void tsi721_port_write_free(struct tsi721_device *priv) | |
| { | |
| kfifo_free(&priv->pw_fifo); | |
| } | |
| static int tsi721_doorbell_init(struct tsi721_device *priv) | |
| { | |
| /* Outbound Doorbells do not require any setup. | |
| * Tsi721 uses dedicated PCI BAR1 to generate doorbells. | |
| * That BAR1 was mapped during the probe routine. | |
| */ | |
| /* Initialize Inbound Doorbell processing DPC and queue */ | |
| priv->db_discard_count = 0; | |
| INIT_WORK(&priv->idb_work, tsi721_db_dpc); | |
| /* Allocate buffer for inbound doorbells queue */ | |
| priv->idb_base = dma_zalloc_coherent(&priv->pdev->dev, | |
| IDB_QSIZE * TSI721_IDB_ENTRY_SIZE, | |
| &priv->idb_dma, GFP_KERNEL); | |
| if (!priv->idb_base) | |
| return -ENOMEM; | |
| tsi_debug(DBELL, &priv->pdev->dev, | |
| "Allocated IDB buffer @ %p (phys = %pad)", | |
| priv->idb_base, &priv->idb_dma); | |
| iowrite32(TSI721_IDQ_SIZE_VAL(IDB_QSIZE), | |
| priv->regs + TSI721_IDQ_SIZE(IDB_QUEUE)); | |
| iowrite32(((u64)priv->idb_dma >> 32), | |
| priv->regs + TSI721_IDQ_BASEU(IDB_QUEUE)); | |
| iowrite32(((u64)priv->idb_dma & TSI721_IDQ_BASEL_ADDR), | |
| priv->regs + TSI721_IDQ_BASEL(IDB_QUEUE)); | |
| /* Enable accepting all inbound doorbells */ | |
| iowrite32(0, priv->regs + TSI721_IDQ_MASK(IDB_QUEUE)); | |
| iowrite32(TSI721_IDQ_INIT, priv->regs + TSI721_IDQ_CTL(IDB_QUEUE)); | |
| iowrite32(0, priv->regs + TSI721_IDQ_RP(IDB_QUEUE)); | |
| return 0; | |
| } | |
| static void tsi721_doorbell_free(struct tsi721_device *priv) | |
| { | |
| if (priv->idb_base == NULL) | |
| return; | |
| /* Free buffer allocated for inbound doorbell queue */ | |
| dma_free_coherent(&priv->pdev->dev, IDB_QSIZE * TSI721_IDB_ENTRY_SIZE, | |
| priv->idb_base, priv->idb_dma); | |
| priv->idb_base = NULL; | |
| } | |
| /** | |
| * tsi721_bdma_maint_init - Initialize maintenance request BDMA channel. | |
| * @priv: pointer to tsi721 private data | |
| * | |
| * Initialize BDMA channel allocated for RapidIO maintenance read/write | |
| * request generation | |
| * Returns %0 on success or %-ENOMEM on failure. | |
| */ | |
| static int tsi721_bdma_maint_init(struct tsi721_device *priv) | |
| { | |
| struct tsi721_dma_desc *bd_ptr; | |
| u64 *sts_ptr; | |
| dma_addr_t bd_phys, sts_phys; | |
| int sts_size; | |
| int bd_num = 2; | |
| void __iomem *regs; | |
| tsi_debug(MAINT, &priv->pdev->dev, | |
| "Init BDMA_%d Maintenance requests", TSI721_DMACH_MAINT); | |
| /* | |
| * Initialize DMA channel for maintenance requests | |
| */ | |
| priv->mdma.ch_id = TSI721_DMACH_MAINT; | |
| regs = priv->regs + TSI721_DMAC_BASE(TSI721_DMACH_MAINT); | |
| /* Allocate space for DMA descriptors */ | |
| bd_ptr = dma_zalloc_coherent(&priv->pdev->dev, | |
| bd_num * sizeof(struct tsi721_dma_desc), | |
| &bd_phys, GFP_KERNEL); | |
| if (!bd_ptr) | |
| return -ENOMEM; | |
| priv->mdma.bd_num = bd_num; | |
| priv->mdma.bd_phys = bd_phys; | |
| priv->mdma.bd_base = bd_ptr; | |
| tsi_debug(MAINT, &priv->pdev->dev, "DMA descriptors @ %p (phys = %pad)", | |
| bd_ptr, &bd_phys); | |
| /* Allocate space for descriptor status FIFO */ | |
| sts_size = (bd_num >= TSI721_DMA_MINSTSSZ) ? | |
| bd_num : TSI721_DMA_MINSTSSZ; | |
| sts_size = roundup_pow_of_two(sts_size); | |
| sts_ptr = dma_zalloc_coherent(&priv->pdev->dev, | |
| sts_size * sizeof(struct tsi721_dma_sts), | |
| &sts_phys, GFP_KERNEL); | |
| if (!sts_ptr) { | |
| /* Free space allocated for DMA descriptors */ | |
| dma_free_coherent(&priv->pdev->dev, | |
| bd_num * sizeof(struct tsi721_dma_desc), | |
| bd_ptr, bd_phys); | |
| priv->mdma.bd_base = NULL; | |
| return -ENOMEM; | |
| } | |
| priv->mdma.sts_phys = sts_phys; | |
| priv->mdma.sts_base = sts_ptr; | |
| priv->mdma.sts_size = sts_size; | |
| tsi_debug(MAINT, &priv->pdev->dev, | |
| "desc status FIFO @ %p (phys = %pad) size=0x%x", | |
| sts_ptr, &sts_phys, sts_size); | |
| /* Initialize DMA descriptors ring */ | |
| bd_ptr[bd_num - 1].type_id = cpu_to_le32(DTYPE3 << 29); | |
| bd_ptr[bd_num - 1].next_lo = cpu_to_le32((u64)bd_phys & | |
| TSI721_DMAC_DPTRL_MASK); | |
| bd_ptr[bd_num - 1].next_hi = cpu_to_le32((u64)bd_phys >> 32); | |
| /* Setup DMA descriptor pointers */ | |
| iowrite32(((u64)bd_phys >> 32), regs + TSI721_DMAC_DPTRH); | |
| iowrite32(((u64)bd_phys & TSI721_DMAC_DPTRL_MASK), | |
| regs + TSI721_DMAC_DPTRL); | |
| /* Setup descriptor status FIFO */ | |
| iowrite32(((u64)sts_phys >> 32), regs + TSI721_DMAC_DSBH); | |
| iowrite32(((u64)sts_phys & TSI721_DMAC_DSBL_MASK), | |
| regs + TSI721_DMAC_DSBL); | |
| iowrite32(TSI721_DMAC_DSSZ_SIZE(sts_size), | |
| regs + TSI721_DMAC_DSSZ); | |
| /* Clear interrupt bits */ | |
| iowrite32(TSI721_DMAC_INT_ALL, regs + TSI721_DMAC_INT); | |
| ioread32(regs + TSI721_DMAC_INT); | |
| /* Toggle DMA channel initialization */ | |
| iowrite32(TSI721_DMAC_CTL_INIT, regs + TSI721_DMAC_CTL); | |
| ioread32(regs + TSI721_DMAC_CTL); | |
| udelay(10); | |
| return 0; | |
| } | |
| static int tsi721_bdma_maint_free(struct tsi721_device *priv) | |
| { | |
| u32 ch_stat; | |
| struct tsi721_bdma_maint *mdma = &priv->mdma; | |
| void __iomem *regs = priv->regs + TSI721_DMAC_BASE(mdma->ch_id); | |
| if (mdma->bd_base == NULL) | |
| return 0; | |
| /* Check if DMA channel still running */ | |
| ch_stat = ioread32(regs + TSI721_DMAC_STS); | |
| if (ch_stat & TSI721_DMAC_STS_RUN) | |
| return -EFAULT; | |
| /* Put DMA channel into init state */ | |
| iowrite32(TSI721_DMAC_CTL_INIT, regs + TSI721_DMAC_CTL); | |
| /* Free space allocated for DMA descriptors */ | |
| dma_free_coherent(&priv->pdev->dev, | |
| mdma->bd_num * sizeof(struct tsi721_dma_desc), | |
| mdma->bd_base, mdma->bd_phys); | |
| mdma->bd_base = NULL; | |
| /* Free space allocated for status FIFO */ | |
| dma_free_coherent(&priv->pdev->dev, | |
| mdma->sts_size * sizeof(struct tsi721_dma_sts), | |
| mdma->sts_base, mdma->sts_phys); | |
| mdma->sts_base = NULL; | |
| return 0; | |
| } | |
| /* Enable Inbound Messaging Interrupts */ | |
| static void | |
| tsi721_imsg_interrupt_enable(struct tsi721_device *priv, int ch, | |
| u32 inte_mask) | |
| { | |
| u32 rval; | |
| if (!inte_mask) | |
| return; | |
| /* Clear pending Inbound Messaging interrupts */ | |
| iowrite32(inte_mask, priv->regs + TSI721_IBDMAC_INT(ch)); | |
| /* Enable Inbound Messaging interrupts */ | |
| rval = ioread32(priv->regs + TSI721_IBDMAC_INTE(ch)); | |
| iowrite32(rval | inte_mask, priv->regs + TSI721_IBDMAC_INTE(ch)); | |
| if (priv->flags & TSI721_USING_MSIX) | |
| return; /* Finished if we are in MSI-X mode */ | |
| /* | |
| * For MSI and INTA interrupt signalling we need to enable next levels | |
| */ | |
| /* Enable Device Channel Interrupt */ | |
| rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); | |
| iowrite32(rval | TSI721_INT_IMSG_CHAN(ch), | |
| priv->regs + TSI721_DEV_CHAN_INTE); | |
| } | |
| /* Disable Inbound Messaging Interrupts */ | |
| static void | |
| tsi721_imsg_interrupt_disable(struct tsi721_device *priv, int ch, | |
| u32 inte_mask) | |
| { | |
| u32 rval; | |
| if (!inte_mask) | |
| return; | |
| /* Clear pending Inbound Messaging interrupts */ | |
| iowrite32(inte_mask, priv->regs + TSI721_IBDMAC_INT(ch)); | |
| /* Disable Inbound Messaging interrupts */ | |
| rval = ioread32(priv->regs + TSI721_IBDMAC_INTE(ch)); | |
| rval &= ~inte_mask; | |
| iowrite32(rval, priv->regs + TSI721_IBDMAC_INTE(ch)); | |
| if (priv->flags & TSI721_USING_MSIX) | |
| return; /* Finished if we are in MSI-X mode */ | |
| /* | |
| * For MSI and INTA interrupt signalling we need to disable next levels | |
| */ | |
| /* Disable Device Channel Interrupt */ | |
| rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); | |
| rval &= ~TSI721_INT_IMSG_CHAN(ch); | |
| iowrite32(rval, priv->regs + TSI721_DEV_CHAN_INTE); | |
| } | |
| /* Enable Outbound Messaging interrupts */ | |
| static void | |
| tsi721_omsg_interrupt_enable(struct tsi721_device *priv, int ch, | |
| u32 inte_mask) | |
| { | |
| u32 rval; | |
| if (!inte_mask) | |
| return; | |
| /* Clear pending Outbound Messaging interrupts */ | |
| iowrite32(inte_mask, priv->regs + TSI721_OBDMAC_INT(ch)); | |
| /* Enable Outbound Messaging channel interrupts */ | |
| rval = ioread32(priv->regs + TSI721_OBDMAC_INTE(ch)); | |
| iowrite32(rval | inte_mask, priv->regs + TSI721_OBDMAC_INTE(ch)); | |
| if (priv->flags & TSI721_USING_MSIX) | |
| return; /* Finished if we are in MSI-X mode */ | |
| /* | |
| * For MSI and INTA interrupt signalling we need to enable next levels | |
| */ | |
| /* Enable Device Channel Interrupt */ | |
| rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); | |
| iowrite32(rval | TSI721_INT_OMSG_CHAN(ch), | |
| priv->regs + TSI721_DEV_CHAN_INTE); | |
| } | |
| /* Disable Outbound Messaging interrupts */ | |
| static void | |
| tsi721_omsg_interrupt_disable(struct tsi721_device *priv, int ch, | |
| u32 inte_mask) | |
| { | |
| u32 rval; | |
| if (!inte_mask) | |
| return; | |
| /* Clear pending Outbound Messaging interrupts */ | |
| iowrite32(inte_mask, priv->regs + TSI721_OBDMAC_INT(ch)); | |
| /* Disable Outbound Messaging interrupts */ | |
| rval = ioread32(priv->regs + TSI721_OBDMAC_INTE(ch)); | |
| rval &= ~inte_mask; | |
| iowrite32(rval, priv->regs + TSI721_OBDMAC_INTE(ch)); | |
| if (priv->flags & TSI721_USING_MSIX) | |
| return; /* Finished if we are in MSI-X mode */ | |
| /* | |
| * For MSI and INTA interrupt signalling we need to disable next levels | |
| */ | |
| /* Disable Device Channel Interrupt */ | |
| rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); | |
| rval &= ~TSI721_INT_OMSG_CHAN(ch); | |
| iowrite32(rval, priv->regs + TSI721_DEV_CHAN_INTE); | |
| } | |
| /** | |
| * tsi721_add_outb_message - Add message to the Tsi721 outbound message queue | |
| * @mport: Master port with outbound message queue | |
| * @rdev: Target of outbound message | |
| * @mbox: Outbound mailbox | |
| * @buffer: Message to add to outbound queue | |
| * @len: Length of message | |
| */ | |
| static int | |
| tsi721_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox, | |
| void *buffer, size_t len) | |
| { | |
| struct tsi721_device *priv = mport->priv; | |
| struct tsi721_omsg_desc *desc; | |
| u32 tx_slot; | |
| unsigned long flags; | |
| if (!priv->omsg_init[mbox] || | |
| len > TSI721_MSG_MAX_SIZE || len < 8) | |
| return -EINVAL; | |
| spin_lock_irqsave(&priv->omsg_ring[mbox].lock, flags); | |
| tx_slot = priv->omsg_ring[mbox].tx_slot; | |
| /* Copy copy message into transfer buffer */ | |
| memcpy(priv->omsg_ring[mbox].omq_base[tx_slot], buffer, len); | |
| if (len & 0x7) | |
| len += 8; | |
| /* Build descriptor associated with buffer */ | |
| desc = priv->omsg_ring[mbox].omd_base; | |
| desc[tx_slot].type_id = cpu_to_le32((DTYPE4 << 29) | rdev->destid); | |
| #ifdef TSI721_OMSG_DESC_INT | |
| /* Request IOF_DONE interrupt generation for each N-th frame in queue */ | |
| if (tx_slot % 4 == 0) | |
| desc[tx_slot].type_id |= cpu_to_le32(TSI721_OMD_IOF); | |
| #endif | |
| desc[tx_slot].msg_info = | |
| cpu_to_le32((mport->sys_size << 26) | (mbox << 22) | | |
| (0xe << 12) | (len & 0xff8)); | |
| desc[tx_slot].bufptr_lo = | |
| cpu_to_le32((u64)priv->omsg_ring[mbox].omq_phys[tx_slot] & | |
| 0xffffffff); | |
| desc[tx_slot].bufptr_hi = | |
| cpu_to_le32((u64)priv->omsg_ring[mbox].omq_phys[tx_slot] >> 32); | |
| priv->omsg_ring[mbox].wr_count++; | |
| /* Go to next descriptor */ | |
| if (++priv->omsg_ring[mbox].tx_slot == priv->omsg_ring[mbox].size) { | |
| priv->omsg_ring[mbox].tx_slot = 0; | |
| /* Move through the ring link descriptor at the end */ | |
| priv->omsg_ring[mbox].wr_count++; | |
| } | |
| mb(); | |
| /* Set new write count value */ | |
| iowrite32(priv->omsg_ring[mbox].wr_count, | |
| priv->regs + TSI721_OBDMAC_DWRCNT(mbox)); | |
| ioread32(priv->regs + TSI721_OBDMAC_DWRCNT(mbox)); | |
| spin_unlock_irqrestore(&priv->omsg_ring[mbox].lock, flags); | |
| return 0; | |
| } | |
| /** | |
| * tsi721_omsg_handler - Outbound Message Interrupt Handler | |
| * @priv: pointer to tsi721 private data | |
| * @ch: number of OB MSG channel to service | |
| * | |
| * Services channel interrupts from outbound messaging engine. | |
| */ | |
| static void tsi721_omsg_handler(struct tsi721_device *priv, int ch) | |
| { | |
| u32 omsg_int; | |
| struct rio_mport *mport = &priv->mport; | |
| void *dev_id = NULL; | |
| u32 tx_slot = 0xffffffff; | |
| int do_callback = 0; | |
| spin_lock(&priv->omsg_ring[ch].lock); | |
| omsg_int = ioread32(priv->regs + TSI721_OBDMAC_INT(ch)); | |
| if (omsg_int & TSI721_OBDMAC_INT_ST_FULL) | |
| tsi_info(&priv->pdev->dev, | |
| "OB MBOX%d: Status FIFO is full", ch); | |
| if (omsg_int & (TSI721_OBDMAC_INT_DONE | TSI721_OBDMAC_INT_IOF_DONE)) { | |
| u32 srd_ptr; | |
| u64 *sts_ptr, last_ptr = 0, prev_ptr = 0; | |
| int i, j; | |
| /* | |
| * Find last successfully processed descriptor | |
| */ | |
| /* Check and clear descriptor status FIFO entries */ | |
| srd_ptr = priv->omsg_ring[ch].sts_rdptr; | |
| sts_ptr = priv->omsg_ring[ch].sts_base; | |
| j = srd_ptr * 8; | |
| while (sts_ptr[j]) { | |
| for (i = 0; i < 8 && sts_ptr[j]; i++, j++) { | |
| prev_ptr = last_ptr; | |
| last_ptr = le64_to_cpu(sts_ptr[j]); | |
| sts_ptr[j] = 0; | |
| } | |
| ++srd_ptr; | |
| srd_ptr %= priv->omsg_ring[ch].sts_size; | |
| j = srd_ptr * 8; | |
| } | |
| if (last_ptr == 0) | |
| goto no_sts_update; | |
| priv->omsg_ring[ch].sts_rdptr = srd_ptr; | |
| iowrite32(srd_ptr, priv->regs + TSI721_OBDMAC_DSRP(ch)); | |
| if (!mport->outb_msg[ch].mcback) | |
| goto no_sts_update; | |
| /* Inform upper layer about transfer completion */ | |
| tx_slot = (last_ptr - (u64)priv->omsg_ring[ch].omd_phys)/ | |
| sizeof(struct tsi721_omsg_desc); | |
| /* | |
| * Check if this is a Link Descriptor (LD). | |
| * If yes, ignore LD and use descriptor processed | |
| * before LD. | |
| */ | |
| if (tx_slot == priv->omsg_ring[ch].size) { | |
| if (prev_ptr) | |
| tx_slot = (prev_ptr - | |
| (u64)priv->omsg_ring[ch].omd_phys)/ | |
| sizeof(struct tsi721_omsg_desc); | |
| else | |
| goto no_sts_update; | |
| } | |
| if (tx_slot >= priv->omsg_ring[ch].size) | |
| tsi_debug(OMSG, &priv->pdev->dev, | |
| "OB_MSG tx_slot=%x > size=%x", | |
| tx_slot, priv->omsg_ring[ch].size); | |
| WARN_ON(tx_slot >= priv->omsg_ring[ch].size); | |
| /* Move slot index to the next message to be sent */ | |
| ++tx_slot; | |
| if (tx_slot == priv->omsg_ring[ch].size) | |
| tx_slot = 0; | |
| dev_id = priv->omsg_ring[ch].dev_id; | |
| do_callback = 1; | |
| } | |
| no_sts_update: | |
| if (omsg_int & TSI721_OBDMAC_INT_ERROR) { | |
| /* | |
| * Outbound message operation aborted due to error, | |
| * reinitialize OB MSG channel | |
| */ | |
| tsi_debug(OMSG, &priv->pdev->dev, "OB MSG ABORT ch_stat=%x", | |
| ioread32(priv->regs + TSI721_OBDMAC_STS(ch))); | |
| iowrite32(TSI721_OBDMAC_INT_ERROR, | |
| priv->regs + TSI721_OBDMAC_INT(ch)); | |
| iowrite32(TSI721_OBDMAC_CTL_RETRY_THR | TSI721_OBDMAC_CTL_INIT, | |
| priv->regs + TSI721_OBDMAC_CTL(ch)); | |
| ioread32(priv->regs + TSI721_OBDMAC_CTL(ch)); | |
| /* Inform upper level to clear all pending tx slots */ | |
| dev_id = priv->omsg_ring[ch].dev_id; | |
| tx_slot = priv->omsg_ring[ch].tx_slot; | |
| do_callback = 1; | |
| /* Synch tx_slot tracking */ | |
| iowrite32(priv->omsg_ring[ch].tx_slot, | |
| priv->regs + TSI721_OBDMAC_DRDCNT(ch)); | |
| ioread32(priv->regs + TSI721_OBDMAC_DRDCNT(ch)); | |
| priv->omsg_ring[ch].wr_count = priv->omsg_ring[ch].tx_slot; | |
| priv->omsg_ring[ch].sts_rdptr = 0; | |
| } | |
| /* Clear channel interrupts */ | |
| iowrite32(omsg_int, priv->regs + TSI721_OBDMAC_INT(ch)); | |
| if (!(priv->flags & TSI721_USING_MSIX)) { | |
| u32 ch_inte; | |
| /* Re-enable channel interrupts */ | |
| ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); | |
| ch_inte |= TSI721_INT_OMSG_CHAN(ch); | |
| iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE); | |
| } | |
| spin_unlock(&priv->omsg_ring[ch].lock); | |
| if (mport->outb_msg[ch].mcback && do_callback) | |
| mport->outb_msg[ch].mcback(mport, dev_id, ch, tx_slot); | |
| } | |
| /** | |
| * tsi721_open_outb_mbox - Initialize Tsi721 outbound mailbox | |
| * @mport: Master port implementing Outbound Messaging Engine | |
| * @dev_id: Device specific pointer to pass on event | |
| * @mbox: Mailbox to open | |
| * @entries: Number of entries in the outbound mailbox ring | |
| */ | |
| static int tsi721_open_outb_mbox(struct rio_mport *mport, void *dev_id, | |
| int mbox, int entries) | |
| { | |
| struct tsi721_device *priv = mport->priv; | |
| struct tsi721_omsg_desc *bd_ptr; | |
| int i, rc = 0; | |
| if ((entries < TSI721_OMSGD_MIN_RING_SIZE) || | |
| (entries > (TSI721_OMSGD_RING_SIZE)) || | |
| (!is_power_of_2(entries)) || mbox >= RIO_MAX_MBOX) { | |
| rc = -EINVAL; | |
| goto out; | |
| } | |
| if ((mbox_sel & (1 << mbox)) == 0) { | |
| rc = -ENODEV; | |
| goto out; | |
| } | |
| priv->omsg_ring[mbox].dev_id = dev_id; | |
| priv->omsg_ring[mbox].size = entries; | |
| priv->omsg_ring[mbox].sts_rdptr = 0; | |
| spin_lock_init(&priv->omsg_ring[mbox].lock); | |
| /* Outbound Msg Buffer allocation based on | |
| the number of maximum descriptor entries */ | |
| for (i = 0; i < entries; i++) { | |
| priv->omsg_ring[mbox].omq_base[i] = | |
| dma_alloc_coherent( | |
| &priv->pdev->dev, TSI721_MSG_BUFFER_SIZE, | |
| &priv->omsg_ring[mbox].omq_phys[i], | |
| GFP_KERNEL); | |
| if (priv->omsg_ring[mbox].omq_base[i] == NULL) { | |
| tsi_debug(OMSG, &priv->pdev->dev, | |
| "ENOMEM for OB_MSG_%d data buffer", mbox); | |
| rc = -ENOMEM; | |
| goto out_buf; | |
| } | |
| } | |
| /* Outbound message descriptor allocation */ | |
| priv->omsg_ring[mbox].omd_base = dma_alloc_coherent( | |
| &priv->pdev->dev, | |
| (entries + 1) * sizeof(struct tsi721_omsg_desc), | |
| &priv->omsg_ring[mbox].omd_phys, GFP_KERNEL); | |
| if (priv->omsg_ring[mbox].omd_base == NULL) { | |
| tsi_debug(OMSG, &priv->pdev->dev, | |
| "ENOMEM for OB_MSG_%d descriptor memory", mbox); | |
| rc = -ENOMEM; | |
| goto out_buf; | |
| } | |
| priv->omsg_ring[mbox].tx_slot = 0; | |
| /* Outbound message descriptor status FIFO allocation */ | |
| priv->omsg_ring[mbox].sts_size = roundup_pow_of_two(entries + 1); | |
| priv->omsg_ring[mbox].sts_base = dma_zalloc_coherent(&priv->pdev->dev, | |
| priv->omsg_ring[mbox].sts_size * | |
| sizeof(struct tsi721_dma_sts), | |
| &priv->omsg_ring[mbox].sts_phys, GFP_KERNEL); | |
| if (priv->omsg_ring[mbox].sts_base == NULL) { | |
| tsi_debug(OMSG, &priv->pdev->dev, | |
| "ENOMEM for OB_MSG_%d status FIFO", mbox); | |
| rc = -ENOMEM; | |
| goto out_desc; | |
| } | |
| /* | |
| * Configure Outbound Messaging Engine | |
| */ | |
| /* Setup Outbound Message descriptor pointer */ | |
| iowrite32(((u64)priv->omsg_ring[mbox].omd_phys >> 32), | |
| priv->regs + TSI721_OBDMAC_DPTRH(mbox)); | |
| iowrite32(((u64)priv->omsg_ring[mbox].omd_phys & | |
| TSI721_OBDMAC_DPTRL_MASK), | |
| priv->regs + TSI721_OBDMAC_DPTRL(mbox)); | |
| /* Setup Outbound Message descriptor status FIFO */ | |
| iowrite32(((u64)priv->omsg_ring[mbox].sts_phys >> 32), | |
| priv->regs + TSI721_OBDMAC_DSBH(mbox)); | |
| iowrite32(((u64)priv->omsg_ring[mbox].sts_phys & | |
| TSI721_OBDMAC_DSBL_MASK), | |
| priv->regs + TSI721_OBDMAC_DSBL(mbox)); | |
| iowrite32(TSI721_DMAC_DSSZ_SIZE(priv->omsg_ring[mbox].sts_size), | |
| priv->regs + (u32)TSI721_OBDMAC_DSSZ(mbox)); | |
| /* Enable interrupts */ | |
| #ifdef CONFIG_PCI_MSI | |
| if (priv->flags & TSI721_USING_MSIX) { | |
| int idx = TSI721_VECT_OMB0_DONE + mbox; | |
| /* Request interrupt service if we are in MSI-X mode */ | |
| rc = request_irq(priv->msix[idx].vector, tsi721_omsg_msix, 0, | |
| priv->msix[idx].irq_name, (void *)priv); | |
| if (rc) { | |
| tsi_debug(OMSG, &priv->pdev->dev, | |
| "Unable to get MSI-X IRQ for OBOX%d-DONE", | |
| mbox); | |
| goto out_stat; | |
| } | |
| idx = TSI721_VECT_OMB0_INT + mbox; | |
| rc = request_irq(priv->msix[idx].vector, tsi721_omsg_msix, 0, | |
| priv->msix[idx].irq_name, (void *)priv); | |
| if (rc) { | |
| tsi_debug(OMSG, &priv->pdev->dev, | |
| "Unable to get MSI-X IRQ for MBOX%d-INT", mbox); | |
| idx = TSI721_VECT_OMB0_DONE + mbox; | |
| free_irq(priv->msix[idx].vector, (void *)priv); | |
| goto out_stat; | |
| } | |
| } | |
| #endif /* CONFIG_PCI_MSI */ | |
| tsi721_omsg_interrupt_enable(priv, mbox, TSI721_OBDMAC_INT_ALL); | |
| /* Initialize Outbound Message descriptors ring */ | |
| bd_ptr = priv->omsg_ring[mbox].omd_base; | |
| bd_ptr[entries].type_id = cpu_to_le32(DTYPE5 << 29); | |
| bd_ptr[entries].msg_info = 0; | |
| bd_ptr[entries].next_lo = | |
| cpu_to_le32((u64)priv->omsg_ring[mbox].omd_phys & | |
| TSI721_OBDMAC_DPTRL_MASK); | |
| bd_ptr[entries].next_hi = | |
| cpu_to_le32((u64)priv->omsg_ring[mbox].omd_phys >> 32); | |
| priv->omsg_ring[mbox].wr_count = 0; | |
| mb(); | |
| /* Initialize Outbound Message engine */ | |
| iowrite32(TSI721_OBDMAC_CTL_RETRY_THR | TSI721_OBDMAC_CTL_INIT, | |
| priv->regs + TSI721_OBDMAC_CTL(mbox)); | |
| ioread32(priv->regs + TSI721_OBDMAC_DWRCNT(mbox)); | |
| udelay(10); | |
| priv->omsg_init[mbox] = 1; | |
| return 0; | |
| #ifdef CONFIG_PCI_MSI | |
| out_stat: | |
| dma_free_coherent(&priv->pdev->dev, | |
| priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts), | |
| priv->omsg_ring[mbox].sts_base, | |
| priv->omsg_ring[mbox].sts_phys); | |
| priv->omsg_ring[mbox].sts_base = NULL; | |
| #endif /* CONFIG_PCI_MSI */ | |
| out_desc: | |
| dma_free_coherent(&priv->pdev->dev, | |
| (entries + 1) * sizeof(struct tsi721_omsg_desc), | |
| priv->omsg_ring[mbox].omd_base, | |
| priv->omsg_ring[mbox].omd_phys); | |
| priv->omsg_ring[mbox].omd_base = NULL; | |
| out_buf: | |
| for (i = 0; i < priv->omsg_ring[mbox].size; i++) { | |
| if (priv->omsg_ring[mbox].omq_base[i]) { | |
| dma_free_coherent(&priv->pdev->dev, | |
| TSI721_MSG_BUFFER_SIZE, | |
| priv->omsg_ring[mbox].omq_base[i], | |
| priv->omsg_ring[mbox].omq_phys[i]); | |
| priv->omsg_ring[mbox].omq_base[i] = NULL; | |
| } | |
| } | |
| out: | |
| return rc; | |
| } | |
| /** | |
| * tsi721_close_outb_mbox - Close Tsi721 outbound mailbox | |
| * @mport: Master port implementing the outbound message unit | |
| * @mbox: Mailbox to close | |
| */ | |
| static void tsi721_close_outb_mbox(struct rio_mport *mport, int mbox) | |
| { | |
| struct tsi721_device *priv = mport->priv; | |
| u32 i; | |
| if (!priv->omsg_init[mbox]) | |
| return; | |
| priv->omsg_init[mbox] = 0; | |
| /* Disable Interrupts */ | |
| tsi721_omsg_interrupt_disable(priv, mbox, TSI721_OBDMAC_INT_ALL); | |
| #ifdef CONFIG_PCI_MSI | |
| if (priv->flags & TSI721_USING_MSIX) { | |
| free_irq(priv->msix[TSI721_VECT_OMB0_DONE + mbox].vector, | |
| (void *)priv); | |
| free_irq(priv->msix[TSI721_VECT_OMB0_INT + mbox].vector, | |
| (void *)priv); | |
| } | |
| #endif /* CONFIG_PCI_MSI */ | |
| /* Free OMSG Descriptor Status FIFO */ | |
| dma_free_coherent(&priv->pdev->dev, | |
| priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts), | |
| priv->omsg_ring[mbox].sts_base, | |
| priv->omsg_ring[mbox].sts_phys); | |
| priv->omsg_ring[mbox].sts_base = NULL; | |
| /* Free OMSG descriptors */ | |
| dma_free_coherent(&priv->pdev->dev, | |
| (priv->omsg_ring[mbox].size + 1) * | |
| sizeof(struct tsi721_omsg_desc), | |
| priv->omsg_ring[mbox].omd_base, | |
| priv->omsg_ring[mbox].omd_phys); | |
| priv->omsg_ring[mbox].omd_base = NULL; | |
| /* Free message buffers */ | |
| for (i = 0; i < priv->omsg_ring[mbox].size; i++) { | |
| if (priv->omsg_ring[mbox].omq_base[i]) { | |
| dma_free_coherent(&priv->pdev->dev, | |
| TSI721_MSG_BUFFER_SIZE, | |
| priv->omsg_ring[mbox].omq_base[i], | |
| priv->omsg_ring[mbox].omq_phys[i]); | |
| priv->omsg_ring[mbox].omq_base[i] = NULL; | |
| } | |
| } | |
| } | |
| /** | |
| * tsi721_imsg_handler - Inbound Message Interrupt Handler | |
| * @priv: pointer to tsi721 private data | |
| * @ch: inbound message channel number to service | |
| * | |
| * Services channel interrupts from inbound messaging engine. | |
| */ | |
| static void tsi721_imsg_handler(struct tsi721_device *priv, int ch) | |
| { | |
| u32 mbox = ch - 4; | |
| u32 imsg_int; | |
| struct rio_mport *mport = &priv->mport; | |
| spin_lock(&priv->imsg_ring[mbox].lock); | |
| imsg_int = ioread32(priv->regs + TSI721_IBDMAC_INT(ch)); | |
| if (imsg_int & TSI721_IBDMAC_INT_SRTO) | |
| tsi_info(&priv->pdev->dev, "IB MBOX%d SRIO timeout", mbox); | |
| if (imsg_int & TSI721_IBDMAC_INT_PC_ERROR) | |
| tsi_info(&priv->pdev->dev, "IB MBOX%d PCIe error", mbox); | |
| if (imsg_int & TSI721_IBDMAC_INT_FQ_LOW) | |
| tsi_info(&priv->pdev->dev, "IB MBOX%d IB free queue low", mbox); | |
| /* Clear IB channel interrupts */ | |
| iowrite32(imsg_int, priv->regs + TSI721_IBDMAC_INT(ch)); | |
| /* If an IB Msg is received notify the upper layer */ | |
| if (imsg_int & TSI721_IBDMAC_INT_DQ_RCV && | |
| mport->inb_msg[mbox].mcback) | |
| mport->inb_msg[mbox].mcback(mport, | |
| priv->imsg_ring[mbox].dev_id, mbox, -1); | |
| if (!(priv->flags & TSI721_USING_MSIX)) { | |
| u32 ch_inte; | |
| /* Re-enable channel interrupts */ | |
| ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); | |
| ch_inte |= TSI721_INT_IMSG_CHAN(ch); | |
| iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE); | |
| } | |
| spin_unlock(&priv->imsg_ring[mbox].lock); | |
| } | |
| /** | |
| * tsi721_open_inb_mbox - Initialize Tsi721 inbound mailbox | |
| * @mport: Master port implementing the Inbound Messaging Engine | |
| * @dev_id: Device specific pointer to pass on event | |
| * @mbox: Mailbox to open | |
| * @entries: Number of entries in the inbound mailbox ring | |
| */ | |
| static int tsi721_open_inb_mbox(struct rio_mport *mport, void *dev_id, | |
| int mbox, int entries) | |
| { | |
| struct tsi721_device *priv = mport->priv; | |
| int ch = mbox + 4; | |
| int i; | |
| u64 *free_ptr; | |
| int rc = 0; | |
| if ((entries < TSI721_IMSGD_MIN_RING_SIZE) || | |
| (entries > TSI721_IMSGD_RING_SIZE) || | |
| (!is_power_of_2(entries)) || mbox >= RIO_MAX_MBOX) { | |
| rc = -EINVAL; | |
| goto out; | |
| } | |
| if ((mbox_sel & (1 << mbox)) == 0) { | |
| rc = -ENODEV; | |
| goto out; | |
| } | |
| /* Initialize IB Messaging Ring */ | |
| priv->imsg_ring[mbox].dev_id = dev_id; | |
| priv->imsg_ring[mbox].size = entries; | |
| priv->imsg_ring[mbox].rx_slot = 0; | |
| priv->imsg_ring[mbox].desc_rdptr = 0; | |
| priv->imsg_ring[mbox].fq_wrptr = 0; | |
| for (i = 0; i < priv->imsg_ring[mbox].size; i++) | |
| priv->imsg_ring[mbox].imq_base[i] = NULL; | |
| spin_lock_init(&priv->imsg_ring[mbox].lock); | |
| /* Allocate buffers for incoming messages */ | |
| priv->imsg_ring[mbox].buf_base = | |
| dma_alloc_coherent(&priv->pdev->dev, | |
| entries * TSI721_MSG_BUFFER_SIZE, | |
| &priv->imsg_ring[mbox].buf_phys, | |
| GFP_KERNEL); | |
| if (priv->imsg_ring[mbox].buf_base == NULL) { | |
| tsi_err(&priv->pdev->dev, | |
| "Failed to allocate buffers for IB MBOX%d", mbox); | |
| rc = -ENOMEM; | |
| goto out; | |
| } | |
| /* Allocate memory for circular free list */ | |
| priv->imsg_ring[mbox].imfq_base = | |
| dma_alloc_coherent(&priv->pdev->dev, | |
| entries * 8, | |
| &priv->imsg_ring[mbox].imfq_phys, | |
| GFP_KERNEL); | |
| if (priv->imsg_ring[mbox].imfq_base == NULL) { | |
| tsi_err(&priv->pdev->dev, | |
| "Failed to allocate free queue for IB MBOX%d", mbox); | |
| rc = -ENOMEM; | |
| goto out_buf; | |
| } | |
| /* Allocate memory for Inbound message descriptors */ | |
| priv->imsg_ring[mbox].imd_base = | |
| dma_alloc_coherent(&priv->pdev->dev, | |
| entries * sizeof(struct tsi721_imsg_desc), | |
| &priv->imsg_ring[mbox].imd_phys, GFP_KERNEL); | |
| if (priv->imsg_ring[mbox].imd_base == NULL) { | |
| tsi_err(&priv->pdev->dev, | |
| "Failed to allocate descriptor memory for IB MBOX%d", | |
| mbox); | |
| rc = -ENOMEM; | |
| goto out_dma; | |
| } | |
| /* Fill free buffer pointer list */ | |
| free_ptr = priv->imsg_ring[mbox].imfq_base; | |
| for (i = 0; i < entries; i++) | |
| free_ptr[i] = cpu_to_le64( | |
| (u64)(priv->imsg_ring[mbox].buf_phys) + | |
| i * 0x1000); | |
| mb(); | |
| /* | |
| * For mapping of inbound SRIO Messages into appropriate queues we need | |
| * to set Inbound Device ID register in the messaging engine. We do it | |
| * once when first inbound mailbox is requested. | |
| */ | |
| if (!(priv->flags & TSI721_IMSGID_SET)) { | |
| iowrite32((u32)priv->mport.host_deviceid, | |
| priv->regs + TSI721_IB_DEVID); | |
| priv->flags |= TSI721_IMSGID_SET; | |
| } | |
| /* | |
| * Configure Inbound Messaging channel (ch = mbox + 4) | |
| */ | |
| /* Setup Inbound Message free queue */ | |
| iowrite32(((u64)priv->imsg_ring[mbox].imfq_phys >> 32), | |
| priv->regs + TSI721_IBDMAC_FQBH(ch)); | |
| iowrite32(((u64)priv->imsg_ring[mbox].imfq_phys & | |
| TSI721_IBDMAC_FQBL_MASK), | |
| priv->regs+TSI721_IBDMAC_FQBL(ch)); | |
| iowrite32(TSI721_DMAC_DSSZ_SIZE(entries), | |
| priv->regs + TSI721_IBDMAC_FQSZ(ch)); | |
| /* Setup Inbound Message descriptor queue */ | |
| iowrite32(((u64)priv->imsg_ring[mbox].imd_phys >> 32), | |
| priv->regs + TSI721_IBDMAC_DQBH(ch)); | |
| iowrite32(((u32)priv->imsg_ring[mbox].imd_phys & | |
| (u32)TSI721_IBDMAC_DQBL_MASK), | |
| priv->regs+TSI721_IBDMAC_DQBL(ch)); | |
| iowrite32(TSI721_DMAC_DSSZ_SIZE(entries), | |
| priv->regs + TSI721_IBDMAC_DQSZ(ch)); | |
| /* Enable interrupts */ | |
| #ifdef CONFIG_PCI_MSI | |
| if (priv->flags & TSI721_USING_MSIX) { | |
| int idx = TSI721_VECT_IMB0_RCV + mbox; | |
| /* Request interrupt service if we are in MSI-X mode */ | |
| rc = request_irq(priv->msix[idx].vector, tsi721_imsg_msix, 0, | |
| priv->msix[idx].irq_name, (void *)priv); | |
| if (rc) { | |
| tsi_debug(IMSG, &priv->pdev->dev, | |
| "Unable to get MSI-X IRQ for IBOX%d-DONE", | |
| mbox); | |
| goto out_desc; | |
| } | |
| idx = TSI721_VECT_IMB0_INT + mbox; | |
| rc = request_irq(priv->msix[idx].vector, tsi721_imsg_msix, 0, | |
| priv->msix[idx].irq_name, (void *)priv); | |
| if (rc) { | |
| tsi_debug(IMSG, &priv->pdev->dev, | |
| "Unable to get MSI-X IRQ for IBOX%d-INT", mbox); | |
| free_irq( | |
| priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector, | |
| (void *)priv); | |
| goto out_desc; | |
| } | |
| } | |
| #endif /* CONFIG_PCI_MSI */ | |
| tsi721_imsg_interrupt_enable(priv, ch, TSI721_IBDMAC_INT_ALL); | |
| /* Initialize Inbound Message Engine */ | |
| iowrite32(TSI721_IBDMAC_CTL_INIT, priv->regs + TSI721_IBDMAC_CTL(ch)); | |
| ioread32(priv->regs + TSI721_IBDMAC_CTL(ch)); | |
| udelay(10); | |
| priv->imsg_ring[mbox].fq_wrptr = entries - 1; | |
| iowrite32(entries - 1, priv->regs + TSI721_IBDMAC_FQWP(ch)); | |
| priv->imsg_init[mbox] = 1; | |
| return 0; | |
| #ifdef CONFIG_PCI_MSI | |
| out_desc: | |
| dma_free_coherent(&priv->pdev->dev, | |
| priv->imsg_ring[mbox].size * sizeof(struct tsi721_imsg_desc), | |
| priv->imsg_ring[mbox].imd_base, | |
| priv->imsg_ring[mbox].imd_phys); | |
| priv->imsg_ring[mbox].imd_base = NULL; | |
| #endif /* CONFIG_PCI_MSI */ | |
| out_dma: | |
| dma_free_coherent(&priv->pdev->dev, | |
| priv->imsg_ring[mbox].size * 8, | |
| priv->imsg_ring[mbox].imfq_base, | |
| priv->imsg_ring[mbox].imfq_phys); | |
| priv->imsg_ring[mbox].imfq_base = NULL; | |
| out_buf: | |
| dma_free_coherent(&priv->pdev->dev, | |
| priv->imsg_ring[mbox].size * TSI721_MSG_BUFFER_SIZE, | |
| priv->imsg_ring[mbox].buf_base, | |
| priv->imsg_ring[mbox].buf_phys); | |
| priv->imsg_ring[mbox].buf_base = NULL; | |
| out: | |
| return rc; | |
| } | |
| /** | |
| * tsi721_close_inb_mbox - Shut down Tsi721 inbound mailbox | |
| * @mport: Master port implementing the Inbound Messaging Engine | |
| * @mbox: Mailbox to close | |
| */ | |
| static void tsi721_close_inb_mbox(struct rio_mport *mport, int mbox) | |
| { | |
| struct tsi721_device *priv = mport->priv; | |
| u32 rx_slot; | |
| int ch = mbox + 4; | |
| if (!priv->imsg_init[mbox]) /* mbox isn't initialized yet */ | |
| return; | |
| priv->imsg_init[mbox] = 0; | |
| /* Disable Inbound Messaging Engine */ | |
| /* Disable Interrupts */ | |
| tsi721_imsg_interrupt_disable(priv, ch, TSI721_OBDMAC_INT_MASK); | |
| #ifdef CONFIG_PCI_MSI | |
| if (priv->flags & TSI721_USING_MSIX) { | |
| free_irq(priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector, | |
| (void *)priv); | |
| free_irq(priv->msix[TSI721_VECT_IMB0_INT + mbox].vector, | |
| (void *)priv); | |
| } | |
| #endif /* CONFIG_PCI_MSI */ | |
| /* Clear Inbound Buffer Queue */ | |
| for (rx_slot = 0; rx_slot < priv->imsg_ring[mbox].size; rx_slot++) | |
| priv->imsg_ring[mbox].imq_base[rx_slot] = NULL; | |
| /* Free memory allocated for message buffers */ | |
| dma_free_coherent(&priv->pdev->dev, | |
| priv->imsg_ring[mbox].size * TSI721_MSG_BUFFER_SIZE, | |
| priv->imsg_ring[mbox].buf_base, | |
| priv->imsg_ring[mbox].buf_phys); | |
| priv->imsg_ring[mbox].buf_base = NULL; | |
| /* Free memory allocated for free pointr list */ | |
| dma_free_coherent(&priv->pdev->dev, | |
| priv->imsg_ring[mbox].size * 8, | |
| priv->imsg_ring[mbox].imfq_base, | |
| priv->imsg_ring[mbox].imfq_phys); | |
| priv->imsg_ring[mbox].imfq_base = NULL; | |
| /* Free memory allocated for RX descriptors */ | |
| dma_free_coherent(&priv->pdev->dev, | |
| priv->imsg_ring[mbox].size * sizeof(struct tsi721_imsg_desc), | |
| priv->imsg_ring[mbox].imd_base, | |
| priv->imsg_ring[mbox].imd_phys); | |
| priv->imsg_ring[mbox].imd_base = NULL; | |
| } | |
| /** | |
| * tsi721_add_inb_buffer - Add buffer to the Tsi721 inbound message queue | |
| * @mport: Master port implementing the Inbound Messaging Engine | |
| * @mbox: Inbound mailbox number | |
| * @buf: Buffer to add to inbound queue | |
| */ | |
| static int tsi721_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf) | |
| { | |
| struct tsi721_device *priv = mport->priv; | |
| u32 rx_slot; | |
| int rc = 0; | |
| rx_slot = priv->imsg_ring[mbox].rx_slot; | |
| if (priv->imsg_ring[mbox].imq_base[rx_slot]) { | |
| tsi_err(&priv->pdev->dev, | |
| "Error adding inbound buffer %d, buffer exists", | |
| rx_slot); | |
| rc = -EINVAL; | |
| goto out; | |
| } | |
| priv->imsg_ring[mbox].imq_base[rx_slot] = buf; | |
| if (++priv->imsg_ring[mbox].rx_slot == priv->imsg_ring[mbox].size) | |
| priv->imsg_ring[mbox].rx_slot = 0; | |
| out: | |
| return rc; | |
| } | |
| /** | |
| * tsi721_get_inb_message - Fetch inbound message from the Tsi721 MSG Queue | |
| * @mport: Master port implementing the Inbound Messaging Engine | |
| * @mbox: Inbound mailbox number | |
| * | |
| * Returns pointer to the message on success or NULL on failure. | |
| */ | |
| static void *tsi721_get_inb_message(struct rio_mport *mport, int mbox) | |
| { | |
| struct tsi721_device *priv = mport->priv; | |
| struct tsi721_imsg_desc *desc; | |
| u32 rx_slot; | |
| void *rx_virt = NULL; | |
| u64 rx_phys; | |
| void *buf = NULL; | |
| u64 *free_ptr; | |
| int ch = mbox + 4; | |
| int msg_size; | |
| if (!priv->imsg_init[mbox]) | |
| return NULL; | |
| desc = priv->imsg_ring[mbox].imd_base; | |
| desc += priv->imsg_ring[mbox].desc_rdptr; | |
| if (!(le32_to_cpu(desc->msg_info) & TSI721_IMD_HO)) | |
| goto out; | |
| rx_slot = priv->imsg_ring[mbox].rx_slot; | |
| while (priv->imsg_ring[mbox].imq_base[rx_slot] == NULL) { | |
| if (++rx_slot == priv->imsg_ring[mbox].size) | |
| rx_slot = 0; | |
| } | |
| rx_phys = ((u64)le32_to_cpu(desc->bufptr_hi) << 32) | | |
| le32_to_cpu(desc->bufptr_lo); | |
| rx_virt = priv->imsg_ring[mbox].buf_base + | |
| (rx_phys - (u64)priv->imsg_ring[mbox].buf_phys); | |
| buf = priv->imsg_ring[mbox].imq_base[rx_slot]; | |
| msg_size = le32_to_cpu(desc->msg_info) & TSI721_IMD_BCOUNT; | |
| if (msg_size == 0) | |
| msg_size = RIO_MAX_MSG_SIZE; | |
| memcpy(buf, rx_virt, msg_size); | |
| priv->imsg_ring[mbox].imq_base[rx_slot] = NULL; | |
| desc->msg_info &= cpu_to_le32(~TSI721_IMD_HO); | |
| if (++priv->imsg_ring[mbox].desc_rdptr == priv->imsg_ring[mbox].size) | |
| priv->imsg_ring[mbox].desc_rdptr = 0; | |
| iowrite32(priv->imsg_ring[mbox].desc_rdptr, | |
| priv->regs + TSI721_IBDMAC_DQRP(ch)); | |
| /* Return free buffer into the pointer list */ | |
| free_ptr = priv->imsg_ring[mbox].imfq_base; | |
| free_ptr[priv->imsg_ring[mbox].fq_wrptr] = cpu_to_le64(rx_phys); | |
| if (++priv->imsg_ring[mbox].fq_wrptr == priv->imsg_ring[mbox].size) | |
| priv->imsg_ring[mbox].fq_wrptr = 0; | |
| iowrite32(priv->imsg_ring[mbox].fq_wrptr, | |
| priv->regs + TSI721_IBDMAC_FQWP(ch)); | |
| out: | |
| return buf; | |
| } | |
| /** | |
| * tsi721_messages_init - Initialization of Messaging Engine | |
| * @priv: pointer to tsi721 private data | |
| * | |
| * Configures Tsi721 messaging engine. | |
| */ | |
| static int tsi721_messages_init(struct tsi721_device *priv) | |
| { | |
| int ch; | |
| iowrite32(0, priv->regs + TSI721_SMSG_ECC_LOG); | |
| iowrite32(0, priv->regs + TSI721_RETRY_GEN_CNT); | |
| iowrite32(0, priv->regs + TSI721_RETRY_RX_CNT); | |
| /* Set SRIO Message Request/Response Timeout */ | |
| iowrite32(TSI721_RQRPTO_VAL, priv->regs + TSI721_RQRPTO); | |
| /* Initialize Inbound Messaging Engine Registers */ | |
| for (ch = 0; ch < TSI721_IMSG_CHNUM; ch++) { | |
| /* Clear interrupt bits */ | |
| iowrite32(TSI721_IBDMAC_INT_MASK, | |
| priv->regs + TSI721_IBDMAC_INT(ch)); | |
| /* Clear Status */ | |
| iowrite32(0, priv->regs + TSI721_IBDMAC_STS(ch)); | |
| iowrite32(TSI721_SMSG_ECC_COR_LOG_MASK, | |
| priv->regs + TSI721_SMSG_ECC_COR_LOG(ch)); | |
| iowrite32(TSI721_SMSG_ECC_NCOR_MASK, | |
| priv->regs + TSI721_SMSG_ECC_NCOR(ch)); | |
| } | |
| return 0; | |
| } | |
| /** | |
| * tsi721_query_mport - Fetch inbound message from the Tsi721 MSG Queue | |
| * @mport: Master port implementing the Inbound Messaging Engine | |
| * @mbox: Inbound mailbox number | |
| * | |
| * Returns pointer to the message on success or NULL on failure. | |
| */ | |
| static int tsi721_query_mport(struct rio_mport *mport, | |
| struct rio_mport_attr *attr) | |
| { | |
| struct tsi721_device *priv = mport->priv; | |
| u32 rval; | |
| rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_ERR_STS_CSR(0, 0)); | |
| if (rval & RIO_PORT_N_ERR_STS_PORT_OK) { | |
| rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_CTL2_CSR(0, 0)); | |
| attr->link_speed = (rval & RIO_PORT_N_CTL2_SEL_BAUD) >> 28; | |
| rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_CTL_CSR(0, 0)); | |
| attr->link_width = (rval & RIO_PORT_N_CTL_IPW) >> 27; | |
| } else | |
| attr->link_speed = RIO_LINK_DOWN; | |
| #ifdef CONFIG_RAPIDIO_DMA_ENGINE | |
| attr->flags = RIO_MPORT_DMA | RIO_MPORT_DMA_SG; | |
| attr->dma_max_sge = 0; | |
| attr->dma_max_size = TSI721_BDMA_MAX_BCOUNT; | |
| attr->dma_align = 0; | |
| #else | |
| attr->flags = 0; | |
| #endif | |
| return 0; | |
| } | |
| /** | |
| * tsi721_disable_ints - disables all device interrupts | |
| * @priv: pointer to tsi721 private data | |
| */ | |
| static void tsi721_disable_ints(struct tsi721_device *priv) | |
| { | |
| int ch; | |
| /* Disable all device level interrupts */ | |
| iowrite32(0, priv->regs + TSI721_DEV_INTE); | |
| /* Disable all Device Channel interrupts */ | |
| iowrite32(0, priv->regs + TSI721_DEV_CHAN_INTE); | |
| /* Disable all Inbound Msg Channel interrupts */ | |
| for (ch = 0; ch < TSI721_IMSG_CHNUM; ch++) | |
| iowrite32(0, priv->regs + TSI721_IBDMAC_INTE(ch)); | |
| /* Disable all Outbound Msg Channel interrupts */ | |
| for (ch = 0; ch < TSI721_OMSG_CHNUM; ch++) | |
| iowrite32(0, priv->regs + TSI721_OBDMAC_INTE(ch)); | |
| /* Disable all general messaging interrupts */ | |
| iowrite32(0, priv->regs + TSI721_SMSG_INTE); | |
| /* Disable all BDMA Channel interrupts */ | |
| for (ch = 0; ch < TSI721_DMA_MAXCH; ch++) | |
| iowrite32(0, | |
| priv->regs + TSI721_DMAC_BASE(ch) + TSI721_DMAC_INTE); | |
| /* Disable all general BDMA interrupts */ | |
| iowrite32(0, priv->regs + TSI721_BDMA_INTE); | |
| /* Disable all SRIO Channel interrupts */ | |
| for (ch = 0; ch < TSI721_SRIO_MAXCH; ch++) | |
| iowrite32(0, priv->regs + TSI721_SR_CHINTE(ch)); | |
| /* Disable all general SR2PC interrupts */ | |
| iowrite32(0, priv->regs + TSI721_SR2PC_GEN_INTE); | |
| /* Disable all PC2SR interrupts */ | |
| iowrite32(0, priv->regs + TSI721_PC2SR_INTE); | |
| /* Disable all I2C interrupts */ | |
| iowrite32(0, priv->regs + TSI721_I2C_INT_ENABLE); | |
| /* Disable SRIO MAC interrupts */ | |
| iowrite32(0, priv->regs + TSI721_RIO_EM_INT_ENABLE); | |
| iowrite32(0, priv->regs + TSI721_RIO_EM_DEV_INT_EN); | |
| } | |
| static struct rio_ops tsi721_rio_ops = { | |
| .lcread = tsi721_lcread, | |
| .lcwrite = tsi721_lcwrite, | |
| .cread = tsi721_cread_dma, | |
| .cwrite = tsi721_cwrite_dma, | |
| .dsend = tsi721_dsend, | |
| .open_inb_mbox = tsi721_open_inb_mbox, | |
| .close_inb_mbox = tsi721_close_inb_mbox, | |
| .open_outb_mbox = tsi721_open_outb_mbox, | |
| .close_outb_mbox = tsi721_close_outb_mbox, | |
| .add_outb_message = tsi721_add_outb_message, | |
| .add_inb_buffer = tsi721_add_inb_buffer, | |
| .get_inb_message = tsi721_get_inb_message, | |
| .map_inb = tsi721_rio_map_inb_mem, | |
| .unmap_inb = tsi721_rio_unmap_inb_mem, | |
| .pwenable = tsi721_pw_enable, | |
| .query_mport = tsi721_query_mport, | |
| .map_outb = tsi721_map_outb_win, | |
| .unmap_outb = tsi721_unmap_outb_win, | |
| }; | |
| static void tsi721_mport_release(struct device *dev) | |
| { | |
| struct rio_mport *mport = to_rio_mport(dev); | |
| tsi_debug(EXIT, dev, "%s id=%d", mport->name, mport->id); | |
| } | |
| /** | |
| * tsi721_setup_mport - Setup Tsi721 as RapidIO subsystem master port | |
| * @priv: pointer to tsi721 private data | |
| * | |
| * Configures Tsi721 as RapidIO master port. | |
| */ | |
| static int tsi721_setup_mport(struct tsi721_device *priv) | |
| { | |
| struct pci_dev *pdev = priv->pdev; | |
| int err = 0; | |
| struct rio_mport *mport = &priv->mport; | |
| err = rio_mport_initialize(mport); | |
| if (err) | |
| return err; | |
| mport->ops = &tsi721_rio_ops; | |
| mport->index = 0; | |
| mport->sys_size = 0; /* small system */ | |
| mport->priv = (void *)priv; | |
| mport->phys_efptr = 0x100; | |
| mport->phys_rmap = 1; | |
| mport->dev.parent = &pdev->dev; | |
| mport->dev.release = tsi721_mport_release; | |
| INIT_LIST_HEAD(&mport->dbells); | |
| rio_init_dbell_res(&mport->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff); | |
| rio_init_mbox_res(&mport->riores[RIO_INB_MBOX_RESOURCE], 0, 3); | |
| rio_init_mbox_res(&mport->riores[RIO_OUTB_MBOX_RESOURCE], 0, 3); | |
| snprintf(mport->name, RIO_MAX_MPORT_NAME, "%s(%s)", | |
| dev_driver_string(&pdev->dev), dev_name(&pdev->dev)); | |
| /* Hook up interrupt handler */ | |
| #ifdef CONFIG_PCI_MSI | |
| if (!tsi721_enable_msix(priv)) | |
| priv->flags |= TSI721_USING_MSIX; | |
| else if (!pci_enable_msi(pdev)) | |
| priv->flags |= TSI721_USING_MSI; | |
| else | |
| tsi_debug(MPORT, &pdev->dev, | |
| "MSI/MSI-X is not available. Using legacy INTx."); | |
| #endif /* CONFIG_PCI_MSI */ | |
| err = tsi721_request_irq(priv); | |
| if (err) { | |
| tsi_err(&pdev->dev, "Unable to get PCI IRQ %02X (err=0x%x)", | |
| pdev->irq, err); | |
| return err; | |
| } | |
| #ifdef CONFIG_RAPIDIO_DMA_ENGINE | |
| err = tsi721_register_dma(priv); | |
| if (err) | |
| goto err_exit; | |
| #endif | |
| /* Enable SRIO link */ | |
| iowrite32(ioread32(priv->regs + TSI721_DEVCTL) | | |
| TSI721_DEVCTL_SRBOOT_CMPL, | |
| priv->regs + TSI721_DEVCTL); | |
| if (mport->host_deviceid >= 0) | |
| iowrite32(RIO_PORT_GEN_HOST | RIO_PORT_GEN_MASTER | | |
| RIO_PORT_GEN_DISCOVERED, | |
| priv->regs + (0x100 + RIO_PORT_GEN_CTL_CSR)); | |
| else | |
| iowrite32(0, priv->regs + (0x100 + RIO_PORT_GEN_CTL_CSR)); | |
| err = rio_register_mport(mport); | |
| if (err) { | |
| tsi721_unregister_dma(priv); | |
| goto err_exit; | |
| } | |
| return 0; | |
| err_exit: | |
| tsi721_free_irq(priv); | |
| return err; | |
| } | |
| static int tsi721_probe(struct pci_dev *pdev, | |
| const struct pci_device_id *id) | |
| { | |
| struct tsi721_device *priv; | |
| int err; | |
| priv = kzalloc(sizeof(struct tsi721_device), GFP_KERNEL); | |
| if (!priv) { | |
| err = -ENOMEM; | |
| goto err_exit; | |
| } | |
| err = pci_enable_device(pdev); | |
| if (err) { | |
| tsi_err(&pdev->dev, "Failed to enable PCI device"); | |
| goto err_clean; | |
| } | |
| priv->pdev = pdev; | |
| #ifdef DEBUG | |
| { | |
| int i; | |
| for (i = 0; i <= PCI_STD_RESOURCE_END; i++) { | |
| tsi_debug(INIT, &pdev->dev, "res%d %pR", | |
| i, &pdev->resource[i]); | |
| } | |
| } | |
| #endif | |
| /* | |
| * Verify BAR configuration | |
| */ | |
| /* BAR_0 (registers) must be 512KB+ in 32-bit address space */ | |
| if (!(pci_resource_flags(pdev, BAR_0) & IORESOURCE_MEM) || | |
| pci_resource_flags(pdev, BAR_0) & IORESOURCE_MEM_64 || | |
| pci_resource_len(pdev, BAR_0) < TSI721_REG_SPACE_SIZE) { | |
| tsi_err(&pdev->dev, "Missing or misconfigured CSR BAR0"); | |
| err = -ENODEV; | |
| goto err_disable_pdev; | |
| } | |
| /* BAR_1 (outbound doorbells) must be 16MB+ in 32-bit address space */ | |
| if (!(pci_resource_flags(pdev, BAR_1) & IORESOURCE_MEM) || | |
| pci_resource_flags(pdev, BAR_1) & IORESOURCE_MEM_64 || | |
| pci_resource_len(pdev, BAR_1) < TSI721_DB_WIN_SIZE) { | |
| tsi_err(&pdev->dev, "Missing or misconfigured Doorbell BAR1"); | |
| err = -ENODEV; | |
| goto err_disable_pdev; | |
| } | |
| /* | |
| * BAR_2 and BAR_4 (outbound translation) must be in 64-bit PCIe address | |
| * space. | |
| * NOTE: BAR_2 and BAR_4 are not used by this version of driver. | |
| * It may be a good idea to keep them disabled using HW configuration | |
| * to save PCI memory space. | |
| */ | |
| priv->p2r_bar[0].size = priv->p2r_bar[1].size = 0; | |
| if (pci_resource_flags(pdev, BAR_2) & IORESOURCE_MEM_64) { | |
| if (pci_resource_flags(pdev, BAR_2) & IORESOURCE_PREFETCH) | |
| tsi_debug(INIT, &pdev->dev, | |
| "Prefetchable OBW BAR2 will not be used"); | |
| else { | |
| priv->p2r_bar[0].base = pci_resource_start(pdev, BAR_2); | |
| priv->p2r_bar[0].size = pci_resource_len(pdev, BAR_2); | |
| } | |
| } | |
| if (pci_resource_flags(pdev, BAR_4) & IORESOURCE_MEM_64) { | |
| if (pci_resource_flags(pdev, BAR_4) & IORESOURCE_PREFETCH) | |
| tsi_debug(INIT, &pdev->dev, | |
| "Prefetchable OBW BAR4 will not be used"); | |
| else { | |
| priv->p2r_bar[1].base = pci_resource_start(pdev, BAR_4); | |
| priv->p2r_bar[1].size = pci_resource_len(pdev, BAR_4); | |
| } | |
| } | |
| err = pci_request_regions(pdev, DRV_NAME); | |
| if (err) { | |
| tsi_err(&pdev->dev, "Unable to obtain PCI resources"); | |
| goto err_disable_pdev; | |
| } | |
| pci_set_master(pdev); | |
| priv->regs = pci_ioremap_bar(pdev, BAR_0); | |
| if (!priv->regs) { | |
| tsi_err(&pdev->dev, "Unable to map device registers space"); | |
| err = -ENOMEM; | |
| goto err_free_res; | |
| } | |
| priv->odb_base = pci_ioremap_bar(pdev, BAR_1); | |
| if (!priv->odb_base) { | |
| tsi_err(&pdev->dev, "Unable to map outbound doorbells space"); | |
| err = -ENOMEM; | |
| goto err_unmap_bars; | |
| } | |
| /* Configure DMA attributes. */ | |
| if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { | |
| err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); | |
| if (err) { | |
| tsi_err(&pdev->dev, "Unable to set DMA mask"); | |
| goto err_unmap_bars; | |
| } | |
| if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) | |
| tsi_info(&pdev->dev, "Unable to set consistent DMA mask"); | |
| } else { | |
| err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); | |
| if (err) | |
| tsi_info(&pdev->dev, "Unable to set consistent DMA mask"); | |
| } | |
| BUG_ON(!pci_is_pcie(pdev)); | |
| /* Clear "no snoop" and "relaxed ordering" bits. */ | |
| pcie_capability_clear_and_set_word(pdev, PCI_EXP_DEVCTL, | |
| PCI_EXP_DEVCTL_RELAX_EN | PCI_EXP_DEVCTL_NOSNOOP_EN, 0); | |
| /* Override PCIe Maximum Read Request Size setting if requested */ | |
| if (pcie_mrrs >= 0) { | |
| if (pcie_mrrs <= 5) | |
| pcie_capability_clear_and_set_word(pdev, PCI_EXP_DEVCTL, | |
| PCI_EXP_DEVCTL_READRQ, pcie_mrrs << 12); | |
| else | |
| tsi_info(&pdev->dev, | |
| "Invalid MRRS override value %d", pcie_mrrs); | |
| } | |
| /* Adjust PCIe completion timeout. */ | |
| pcie_capability_clear_and_set_word(pdev, PCI_EXP_DEVCTL2, 0xf, 0x2); | |
| /* | |
| * FIXUP: correct offsets of MSI-X tables in the MSI-X Capability Block | |
| */ | |
| pci_write_config_dword(pdev, TSI721_PCIECFG_EPCTL, 0x01); | |
| pci_write_config_dword(pdev, TSI721_PCIECFG_MSIXTBL, | |
| TSI721_MSIXTBL_OFFSET); | |
| pci_write_config_dword(pdev, TSI721_PCIECFG_MSIXPBA, | |
| TSI721_MSIXPBA_OFFSET); | |
| pci_write_config_dword(pdev, TSI721_PCIECFG_EPCTL, 0); | |
| /* End of FIXUP */ | |
| tsi721_disable_ints(priv); | |
| tsi721_init_pc2sr_mapping(priv); | |
| tsi721_init_sr2pc_mapping(priv); | |
| if (tsi721_bdma_maint_init(priv)) { | |
| tsi_err(&pdev->dev, "BDMA initialization failed"); | |
| err = -ENOMEM; | |
| goto err_unmap_bars; | |
| } | |
| err = tsi721_doorbell_init(priv); | |
| if (err) | |
| goto err_free_bdma; | |
| tsi721_port_write_init(priv); | |
| err = tsi721_messages_init(priv); | |
| if (err) | |
| goto err_free_consistent; | |
| err = tsi721_setup_mport(priv); | |
| if (err) | |
| goto err_free_consistent; | |
| pci_set_drvdata(pdev, priv); | |
| tsi721_interrupts_init(priv); | |
| return 0; | |
| err_free_consistent: | |
| tsi721_port_write_free(priv); | |
| tsi721_doorbell_free(priv); | |
| err_free_bdma: | |
| tsi721_bdma_maint_free(priv); | |
| err_unmap_bars: | |
| if (priv->regs) | |
| iounmap(priv->regs); | |
| if (priv->odb_base) | |
| iounmap(priv->odb_base); | |
| err_free_res: | |
| pci_release_regions(pdev); | |
| pci_clear_master(pdev); | |
| err_disable_pdev: | |
| pci_disable_device(pdev); | |
| err_clean: | |
| kfree(priv); | |
| err_exit: | |
| return err; | |
| } | |
| static void tsi721_remove(struct pci_dev *pdev) | |
| { | |
| struct tsi721_device *priv = pci_get_drvdata(pdev); | |
| tsi_debug(EXIT, &pdev->dev, "enter"); | |
| tsi721_disable_ints(priv); | |
| tsi721_free_irq(priv); | |
| flush_scheduled_work(); | |
| rio_unregister_mport(&priv->mport); | |
| tsi721_unregister_dma(priv); | |
| tsi721_bdma_maint_free(priv); | |
| tsi721_doorbell_free(priv); | |
| tsi721_port_write_free(priv); | |
| tsi721_close_sr2pc_mapping(priv); | |
| if (priv->regs) | |
| iounmap(priv->regs); | |
| if (priv->odb_base) | |
| iounmap(priv->odb_base); | |
| #ifdef CONFIG_PCI_MSI | |
| if (priv->flags & TSI721_USING_MSIX) | |
| pci_disable_msix(priv->pdev); | |
| else if (priv->flags & TSI721_USING_MSI) | |
| pci_disable_msi(priv->pdev); | |
| #endif | |
| pci_release_regions(pdev); | |
| pci_clear_master(pdev); | |
| pci_disable_device(pdev); | |
| pci_set_drvdata(pdev, NULL); | |
| kfree(priv); | |
| tsi_debug(EXIT, &pdev->dev, "exit"); | |
| } | |
| static void tsi721_shutdown(struct pci_dev *pdev) | |
| { | |
| struct tsi721_device *priv = pci_get_drvdata(pdev); | |
| tsi_debug(EXIT, &pdev->dev, "enter"); | |
| tsi721_disable_ints(priv); | |
| tsi721_dma_stop_all(priv); | |
| pci_clear_master(pdev); | |
| pci_disable_device(pdev); | |
| } | |
| static const struct pci_device_id tsi721_pci_tbl[] = { | |
| { PCI_DEVICE(PCI_VENDOR_ID_IDT, PCI_DEVICE_ID_TSI721) }, | |
| { 0, } /* terminate list */ | |
| }; | |
| MODULE_DEVICE_TABLE(pci, tsi721_pci_tbl); | |
| static struct pci_driver tsi721_driver = { | |
| .name = "tsi721", | |
| .id_table = tsi721_pci_tbl, | |
| .probe = tsi721_probe, | |
| .remove = tsi721_remove, | |
| .shutdown = tsi721_shutdown, | |
| }; | |
| module_pci_driver(tsi721_driver); | |
| MODULE_DESCRIPTION("IDT Tsi721 PCIExpress-to-SRIO bridge driver"); | |
| MODULE_AUTHOR("Integrated Device Technology, Inc."); | |
| MODULE_LICENSE("GPL"); |