| /* | |
| * gpio-regulator.c | |
| * | |
| * Copyright 2011 Heiko Stuebner <heiko@sntech.de> | |
| * | |
| * based on fixed.c | |
| * | |
| * Copyright 2008 Wolfson Microelectronics PLC. | |
| * | |
| * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> | |
| * | |
| * Copyright (c) 2009 Nokia Corporation | |
| * Roger Quadros <ext-roger.quadros@nokia.com> | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of the | |
| * License, or (at your option) any later version. | |
| * | |
| * This is useful for systems with mixed controllable and | |
| * non-controllable regulators, as well as for allowing testing on | |
| * systems with no controllable regulators. | |
| */ | |
| #include <linux/err.h> | |
| #include <linux/mutex.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/regulator/driver.h> | |
| #include <linux/regulator/machine.h> | |
| #include <linux/regulator/of_regulator.h> | |
| #include <linux/regulator/gpio-regulator.h> | |
| #include <linux/gpio.h> | |
| #include <linux/slab.h> | |
| #include <linux/of.h> | |
| #include <linux/of_gpio.h> | |
| struct gpio_regulator_data { | |
| struct regulator_desc desc; | |
| struct regulator_dev *dev; | |
| struct gpio *gpios; | |
| int nr_gpios; | |
| struct gpio_regulator_state *states; | |
| int nr_states; | |
| int state; | |
| }; | |
| static int gpio_regulator_get_value(struct regulator_dev *dev) | |
| { | |
| struct gpio_regulator_data *data = rdev_get_drvdata(dev); | |
| int ptr; | |
| for (ptr = 0; ptr < data->nr_states; ptr++) | |
| if (data->states[ptr].gpios == data->state) | |
| return data->states[ptr].value; | |
| return -EINVAL; | |
| } | |
| static int gpio_regulator_set_voltage(struct regulator_dev *dev, | |
| int min_uV, int max_uV, | |
| unsigned *selector) | |
| { | |
| struct gpio_regulator_data *data = rdev_get_drvdata(dev); | |
| int ptr, target = 0, state, best_val = INT_MAX; | |
| for (ptr = 0; ptr < data->nr_states; ptr++) | |
| if (data->states[ptr].value < best_val && | |
| data->states[ptr].value >= min_uV && | |
| data->states[ptr].value <= max_uV) { | |
| target = data->states[ptr].gpios; | |
| best_val = data->states[ptr].value; | |
| if (selector) | |
| *selector = ptr; | |
| } | |
| if (best_val == INT_MAX) | |
| return -EINVAL; | |
| for (ptr = 0; ptr < data->nr_gpios; ptr++) { | |
| state = (target & (1 << ptr)) >> ptr; | |
| gpio_set_value_cansleep(data->gpios[ptr].gpio, state); | |
| } | |
| data->state = target; | |
| return 0; | |
| } | |
| static int gpio_regulator_list_voltage(struct regulator_dev *dev, | |
| unsigned selector) | |
| { | |
| struct gpio_regulator_data *data = rdev_get_drvdata(dev); | |
| if (selector >= data->nr_states) | |
| return -EINVAL; | |
| return data->states[selector].value; | |
| } | |
| static int gpio_regulator_set_current_limit(struct regulator_dev *dev, | |
| int min_uA, int max_uA) | |
| { | |
| struct gpio_regulator_data *data = rdev_get_drvdata(dev); | |
| int ptr, target = 0, state, best_val = 0; | |
| for (ptr = 0; ptr < data->nr_states; ptr++) | |
| if (data->states[ptr].value > best_val && | |
| data->states[ptr].value >= min_uA && | |
| data->states[ptr].value <= max_uA) { | |
| target = data->states[ptr].gpios; | |
| best_val = data->states[ptr].value; | |
| } | |
| if (best_val == 0) | |
| return -EINVAL; | |
| for (ptr = 0; ptr < data->nr_gpios; ptr++) { | |
| state = (target & (1 << ptr)) >> ptr; | |
| gpio_set_value_cansleep(data->gpios[ptr].gpio, state); | |
| } | |
| data->state = target; | |
| return 0; | |
| } | |
| static struct regulator_ops gpio_regulator_voltage_ops = { | |
| .get_voltage = gpio_regulator_get_value, | |
| .set_voltage = gpio_regulator_set_voltage, | |
| .list_voltage = gpio_regulator_list_voltage, | |
| }; | |
| static struct gpio_regulator_config * | |
| of_get_gpio_regulator_config(struct device *dev, struct device_node *np, | |
| const struct regulator_desc *desc) | |
| { | |
| struct gpio_regulator_config *config; | |
| const char *regtype; | |
| int proplen, gpio, i; | |
| int ret; | |
| config = devm_kzalloc(dev, | |
| sizeof(struct gpio_regulator_config), | |
| GFP_KERNEL); | |
| if (!config) | |
| return ERR_PTR(-ENOMEM); | |
| config->init_data = of_get_regulator_init_data(dev, np, desc); | |
| if (!config->init_data) | |
| return ERR_PTR(-EINVAL); | |
| config->supply_name = config->init_data->constraints.name; | |
| if (of_property_read_bool(np, "enable-active-high")) | |
| config->enable_high = true; | |
| if (of_property_read_bool(np, "enable-at-boot")) | |
| config->enabled_at_boot = true; | |
| of_property_read_u32(np, "startup-delay-us", &config->startup_delay); | |
| config->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0); | |
| if (config->enable_gpio == -EPROBE_DEFER) | |
| return ERR_PTR(-EPROBE_DEFER); | |
| /* Fetch GPIOs. - optional property*/ | |
| ret = of_gpio_count(np); | |
| if ((ret < 0) && (ret != -ENOENT)) | |
| return ERR_PTR(ret); | |
| if (ret > 0) { | |
| config->nr_gpios = ret; | |
| config->gpios = devm_kzalloc(dev, | |
| sizeof(struct gpio) * config->nr_gpios, | |
| GFP_KERNEL); | |
| if (!config->gpios) | |
| return ERR_PTR(-ENOMEM); | |
| proplen = of_property_count_u32_elems(np, "gpios-states"); | |
| /* optional property */ | |
| if (proplen < 0) | |
| proplen = 0; | |
| if (proplen > 0 && proplen != config->nr_gpios) { | |
| dev_warn(dev, "gpios <-> gpios-states mismatch\n"); | |
| proplen = 0; | |
| } | |
| for (i = 0; i < config->nr_gpios; i++) { | |
| gpio = of_get_named_gpio(np, "gpios", i); | |
| if (gpio < 0) | |
| break; | |
| config->gpios[i].gpio = gpio; | |
| if (proplen > 0) { | |
| of_property_read_u32_index(np, "gpios-states", | |
| i, &ret); | |
| if (ret) | |
| config->gpios[i].flags = | |
| GPIOF_OUT_INIT_HIGH; | |
| } | |
| } | |
| } | |
| /* Fetch states. */ | |
| proplen = of_property_count_u32_elems(np, "states"); | |
| if (proplen < 0) { | |
| dev_err(dev, "No 'states' property found\n"); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| config->states = devm_kzalloc(dev, | |
| sizeof(struct gpio_regulator_state) | |
| * (proplen / 2), | |
| GFP_KERNEL); | |
| if (!config->states) | |
| return ERR_PTR(-ENOMEM); | |
| for (i = 0; i < proplen / 2; i++) { | |
| of_property_read_u32_index(np, "states", i * 2, | |
| &config->states[i].value); | |
| of_property_read_u32_index(np, "states", i * 2 + 1, | |
| &config->states[i].gpios); | |
| } | |
| config->nr_states = i; | |
| config->type = REGULATOR_VOLTAGE; | |
| ret = of_property_read_string(np, "regulator-type", ®type); | |
| if (ret >= 0) { | |
| if (!strncmp("voltage", regtype, 7)) | |
| config->type = REGULATOR_VOLTAGE; | |
| else if (!strncmp("current", regtype, 7)) | |
| config->type = REGULATOR_CURRENT; | |
| else | |
| dev_warn(dev, "Unknown regulator-type '%s'\n", | |
| regtype); | |
| } | |
| return config; | |
| } | |
| static struct regulator_ops gpio_regulator_current_ops = { | |
| .get_current_limit = gpio_regulator_get_value, | |
| .set_current_limit = gpio_regulator_set_current_limit, | |
| }; | |
| static int gpio_regulator_probe(struct platform_device *pdev) | |
| { | |
| struct gpio_regulator_config *config = dev_get_platdata(&pdev->dev); | |
| struct device_node *np = pdev->dev.of_node; | |
| struct gpio_regulator_data *drvdata; | |
| struct regulator_config cfg = { }; | |
| int ptr, ret, state; | |
| drvdata = devm_kzalloc(&pdev->dev, sizeof(struct gpio_regulator_data), | |
| GFP_KERNEL); | |
| if (drvdata == NULL) | |
| return -ENOMEM; | |
| if (np) { | |
| config = of_get_gpio_regulator_config(&pdev->dev, np, | |
| &drvdata->desc); | |
| if (IS_ERR(config)) | |
| return PTR_ERR(config); | |
| } | |
| drvdata->desc.name = kstrdup(config->supply_name, GFP_KERNEL); | |
| if (drvdata->desc.name == NULL) { | |
| dev_err(&pdev->dev, "Failed to allocate supply name\n"); | |
| ret = -ENOMEM; | |
| goto err; | |
| } | |
| if (config->nr_gpios != 0) { | |
| drvdata->gpios = kmemdup(config->gpios, | |
| config->nr_gpios * sizeof(struct gpio), | |
| GFP_KERNEL); | |
| if (drvdata->gpios == NULL) { | |
| dev_err(&pdev->dev, "Failed to allocate gpio data\n"); | |
| ret = -ENOMEM; | |
| goto err_name; | |
| } | |
| drvdata->nr_gpios = config->nr_gpios; | |
| ret = gpio_request_array(drvdata->gpios, drvdata->nr_gpios); | |
| if (ret) { | |
| if (ret != -EPROBE_DEFER) | |
| dev_err(&pdev->dev, | |
| "Could not obtain regulator setting GPIOs: %d\n", | |
| ret); | |
| goto err_memstate; | |
| } | |
| } | |
| drvdata->states = kmemdup(config->states, | |
| config->nr_states * | |
| sizeof(struct gpio_regulator_state), | |
| GFP_KERNEL); | |
| if (drvdata->states == NULL) { | |
| dev_err(&pdev->dev, "Failed to allocate state data\n"); | |
| ret = -ENOMEM; | |
| goto err_memgpio; | |
| } | |
| drvdata->nr_states = config->nr_states; | |
| drvdata->desc.owner = THIS_MODULE; | |
| drvdata->desc.enable_time = config->startup_delay; | |
| /* handle regulator type*/ | |
| switch (config->type) { | |
| case REGULATOR_VOLTAGE: | |
| drvdata->desc.type = REGULATOR_VOLTAGE; | |
| drvdata->desc.ops = &gpio_regulator_voltage_ops; | |
| drvdata->desc.n_voltages = config->nr_states; | |
| break; | |
| case REGULATOR_CURRENT: | |
| drvdata->desc.type = REGULATOR_CURRENT; | |
| drvdata->desc.ops = &gpio_regulator_current_ops; | |
| break; | |
| default: | |
| dev_err(&pdev->dev, "No regulator type set\n"); | |
| ret = -EINVAL; | |
| goto err_memgpio; | |
| } | |
| /* build initial state from gpio init data. */ | |
| state = 0; | |
| for (ptr = 0; ptr < drvdata->nr_gpios; ptr++) { | |
| if (config->gpios[ptr].flags & GPIOF_OUT_INIT_HIGH) | |
| state |= (1 << ptr); | |
| } | |
| drvdata->state = state; | |
| cfg.dev = &pdev->dev; | |
| cfg.init_data = config->init_data; | |
| cfg.driver_data = drvdata; | |
| cfg.of_node = np; | |
| if (gpio_is_valid(config->enable_gpio)) { | |
| cfg.ena_gpio = config->enable_gpio; | |
| cfg.ena_gpio_initialized = true; | |
| } | |
| cfg.ena_gpio_invert = !config->enable_high; | |
| if (config->enabled_at_boot) { | |
| if (config->enable_high) | |
| cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH; | |
| else | |
| cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW; | |
| } else { | |
| if (config->enable_high) | |
| cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW; | |
| else | |
| cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH; | |
| } | |
| drvdata->dev = regulator_register(&drvdata->desc, &cfg); | |
| if (IS_ERR(drvdata->dev)) { | |
| ret = PTR_ERR(drvdata->dev); | |
| dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret); | |
| goto err_stategpio; | |
| } | |
| platform_set_drvdata(pdev, drvdata); | |
| return 0; | |
| err_stategpio: | |
| gpio_free_array(drvdata->gpios, drvdata->nr_gpios); | |
| err_memstate: | |
| kfree(drvdata->states); | |
| err_memgpio: | |
| kfree(drvdata->gpios); | |
| err_name: | |
| kfree(drvdata->desc.name); | |
| err: | |
| return ret; | |
| } | |
| static int gpio_regulator_remove(struct platform_device *pdev) | |
| { | |
| struct gpio_regulator_data *drvdata = platform_get_drvdata(pdev); | |
| regulator_unregister(drvdata->dev); | |
| gpio_free_array(drvdata->gpios, drvdata->nr_gpios); | |
| kfree(drvdata->states); | |
| kfree(drvdata->gpios); | |
| kfree(drvdata->desc.name); | |
| return 0; | |
| } | |
| #if defined(CONFIG_OF) | |
| static const struct of_device_id regulator_gpio_of_match[] = { | |
| { .compatible = "regulator-gpio", }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, regulator_gpio_of_match); | |
| #endif | |
| static struct platform_driver gpio_regulator_driver = { | |
| .probe = gpio_regulator_probe, | |
| .remove = gpio_regulator_remove, | |
| .driver = { | |
| .name = "gpio-regulator", | |
| .of_match_table = of_match_ptr(regulator_gpio_of_match), | |
| }, | |
| }; | |
| static int __init gpio_regulator_init(void) | |
| { | |
| return platform_driver_register(&gpio_regulator_driver); | |
| } | |
| subsys_initcall(gpio_regulator_init); | |
| static void __exit gpio_regulator_exit(void) | |
| { | |
| platform_driver_unregister(&gpio_regulator_driver); | |
| } | |
| module_exit(gpio_regulator_exit); | |
| MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>"); | |
| MODULE_DESCRIPTION("gpio voltage regulator"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_ALIAS("platform:gpio-regulator"); |