| /* | |
| * isl9305 - Intersil ISL9305 DCDC regulator | |
| * | |
| * Copyright 2014 Linaro Ltd | |
| * | |
| * Author: Mark Brown <broonie@kernel.org> | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/err.h> | |
| #include <linux/i2c.h> | |
| #include <linux/of.h> | |
| #include <linux/platform_data/isl9305.h> | |
| #include <linux/regmap.h> | |
| #include <linux/regulator/driver.h> | |
| #include <linux/regulator/of_regulator.h> | |
| #include <linux/slab.h> | |
| /* | |
| * Registers | |
| */ | |
| #define ISL9305_DCD1OUT 0x0 | |
| #define ISL9305_DCD2OUT 0x1 | |
| #define ISL9305_LDO1OUT 0x2 | |
| #define ISL9305_LDO2OUT 0x3 | |
| #define ISL9305_DCD_PARAMETER 0x4 | |
| #define ISL9305_SYSTEM_PARAMETER 0x5 | |
| #define ISL9305_DCD_SRCTL 0x6 | |
| #define ISL9305_MAX_REG ISL9305_DCD_SRCTL | |
| /* | |
| * DCD_PARAMETER | |
| */ | |
| #define ISL9305_DCD_PHASE 0x40 | |
| #define ISL9305_DCD2_ULTRA 0x20 | |
| #define ISL9305_DCD1_ULTRA 0x10 | |
| #define ISL9305_DCD2_BLD 0x08 | |
| #define ISL9305_DCD1_BLD 0x04 | |
| #define ISL9305_DCD2_MODE 0x02 | |
| #define ISL9305_DCD1_MODE 0x01 | |
| /* | |
| * SYSTEM_PARAMETER | |
| */ | |
| #define ISL9305_I2C_EN 0x40 | |
| #define ISL9305_DCDPOR_MASK 0x30 | |
| #define ISL9305_LDO2_EN 0x08 | |
| #define ISL9305_LDO1_EN 0x04 | |
| #define ISL9305_DCD2_EN 0x02 | |
| #define ISL9305_DCD1_EN 0x01 | |
| /* | |
| * DCD_SRCTL | |
| */ | |
| #define ISL9305_DCD2SR_MASK 0xc0 | |
| #define ISL9305_DCD1SR_MASK 0x07 | |
| static const struct regulator_ops isl9305_ops = { | |
| .enable = regulator_enable_regmap, | |
| .disable = regulator_disable_regmap, | |
| .is_enabled = regulator_is_enabled_regmap, | |
| .list_voltage = regulator_list_voltage_linear, | |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, | |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, | |
| }; | |
| static const struct regulator_desc isl9305_regulators[] = { | |
| [ISL9305_DCD1] = { | |
| .name = "DCD1", | |
| .of_match = of_match_ptr("dcd1"), | |
| .regulators_node = of_match_ptr("regulators"), | |
| .n_voltages = 0x70, | |
| .min_uV = 825000, | |
| .uV_step = 25000, | |
| .vsel_reg = ISL9305_DCD1OUT, | |
| .vsel_mask = 0x7f, | |
| .enable_reg = ISL9305_SYSTEM_PARAMETER, | |
| .enable_mask = ISL9305_DCD1_EN, | |
| .supply_name = "VINDCD1", | |
| .ops = &isl9305_ops, | |
| }, | |
| [ISL9305_DCD2] = { | |
| .name = "DCD2", | |
| .of_match = of_match_ptr("dcd2"), | |
| .regulators_node = of_match_ptr("regulators"), | |
| .n_voltages = 0x70, | |
| .min_uV = 825000, | |
| .uV_step = 25000, | |
| .vsel_reg = ISL9305_DCD2OUT, | |
| .vsel_mask = 0x7f, | |
| .enable_reg = ISL9305_SYSTEM_PARAMETER, | |
| .enable_mask = ISL9305_DCD2_EN, | |
| .supply_name = "VINDCD2", | |
| .ops = &isl9305_ops, | |
| }, | |
| [ISL9305_LDO1] = { | |
| .name = "LDO1", | |
| .of_match = of_match_ptr("ldo1"), | |
| .regulators_node = of_match_ptr("regulators"), | |
| .n_voltages = 0x37, | |
| .min_uV = 900000, | |
| .uV_step = 50000, | |
| .vsel_reg = ISL9305_LDO1OUT, | |
| .vsel_mask = 0x3f, | |
| .enable_reg = ISL9305_SYSTEM_PARAMETER, | |
| .enable_mask = ISL9305_LDO1_EN, | |
| .supply_name = "VINLDO1", | |
| .ops = &isl9305_ops, | |
| }, | |
| [ISL9305_LDO2] = { | |
| .name = "LDO2", | |
| .of_match = of_match_ptr("ldo2"), | |
| .regulators_node = of_match_ptr("regulators"), | |
| .n_voltages = 0x37, | |
| .min_uV = 900000, | |
| .uV_step = 50000, | |
| .vsel_reg = ISL9305_LDO2OUT, | |
| .vsel_mask = 0x3f, | |
| .enable_reg = ISL9305_SYSTEM_PARAMETER, | |
| .enable_mask = ISL9305_LDO2_EN, | |
| .supply_name = "VINLDO2", | |
| .ops = &isl9305_ops, | |
| }, | |
| }; | |
| static const struct regmap_config isl9305_regmap = { | |
| .reg_bits = 8, | |
| .val_bits = 8, | |
| .max_register = ISL9305_MAX_REG, | |
| .cache_type = REGCACHE_RBTREE, | |
| }; | |
| static int isl9305_i2c_probe(struct i2c_client *i2c, | |
| const struct i2c_device_id *id) | |
| { | |
| struct regulator_config config = { }; | |
| struct isl9305_pdata *pdata = i2c->dev.platform_data; | |
| struct regulator_dev *rdev; | |
| struct regmap *regmap; | |
| int i, ret; | |
| regmap = devm_regmap_init_i2c(i2c, &isl9305_regmap); | |
| if (IS_ERR(regmap)) { | |
| ret = PTR_ERR(regmap); | |
| dev_err(&i2c->dev, "Failed to create regmap: %d\n", ret); | |
| return ret; | |
| } | |
| config.dev = &i2c->dev; | |
| for (i = 0; i < ARRAY_SIZE(isl9305_regulators); i++) { | |
| if (pdata) | |
| config.init_data = pdata->init_data[i]; | |
| else | |
| config.init_data = NULL; | |
| rdev = devm_regulator_register(&i2c->dev, | |
| &isl9305_regulators[i], | |
| &config); | |
| if (IS_ERR(rdev)) { | |
| ret = PTR_ERR(rdev); | |
| dev_err(&i2c->dev, "Failed to register %s: %d\n", | |
| isl9305_regulators[i].name, ret); | |
| return ret; | |
| } | |
| } | |
| return 0; | |
| } | |
| #ifdef CONFIG_OF | |
| static const struct of_device_id isl9305_dt_ids[] = { | |
| { .compatible = "isl,isl9305" }, /* for backward compat., don't use */ | |
| { .compatible = "isil,isl9305" }, | |
| { .compatible = "isl,isl9305h" }, /* for backward compat., don't use */ | |
| { .compatible = "isil,isl9305h" }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, isl9305_dt_ids); | |
| #endif | |
| static const struct i2c_device_id isl9305_i2c_id[] = { | |
| { "isl9305", }, | |
| { "isl9305h", }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, isl9305_i2c_id); | |
| static struct i2c_driver isl9305_regulator_driver = { | |
| .driver = { | |
| .name = "isl9305", | |
| .of_match_table = of_match_ptr(isl9305_dt_ids), | |
| }, | |
| .probe = isl9305_i2c_probe, | |
| .id_table = isl9305_i2c_id, | |
| }; | |
| module_i2c_driver(isl9305_regulator_driver); | |
| MODULE_AUTHOR("Mark Brown"); | |
| MODULE_DESCRIPTION("Intersil ISL9305 DCDC regulator"); | |
| MODULE_LICENSE("GPL"); |