| /* | |
| * Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/err.h> | |
| #include <linux/of.h> | |
| #include <linux/of_device.h> | |
| #include <linux/regulator/of_regulator.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/regulator/driver.h> | |
| #include <linux/regulator/machine.h> | |
| #include <linux/regulator/pfuze100.h> | |
| #include <linux/i2c.h> | |
| #include <linux/slab.h> | |
| #include <linux/regmap.h> | |
| #define PFUZE_NUMREGS 128 | |
| #define PFUZE100_VOL_OFFSET 0 | |
| #define PFUZE100_STANDBY_OFFSET 1 | |
| #define PFUZE100_MODE_OFFSET 3 | |
| #define PFUZE100_CONF_OFFSET 4 | |
| #define PFUZE100_DEVICEID 0x0 | |
| #define PFUZE100_REVID 0x3 | |
| #define PFUZE100_FABID 0x4 | |
| #define PFUZE100_SW1ABVOL 0x20 | |
| #define PFUZE100_SW1CVOL 0x2e | |
| #define PFUZE100_SW2VOL 0x35 | |
| #define PFUZE100_SW3AVOL 0x3c | |
| #define PFUZE100_SW3BVOL 0x43 | |
| #define PFUZE100_SW4VOL 0x4a | |
| #define PFUZE100_SWBSTCON1 0x66 | |
| #define PFUZE100_VREFDDRCON 0x6a | |
| #define PFUZE100_VSNVSVOL 0x6b | |
| #define PFUZE100_VGEN1VOL 0x6c | |
| #define PFUZE100_VGEN2VOL 0x6d | |
| #define PFUZE100_VGEN3VOL 0x6e | |
| #define PFUZE100_VGEN4VOL 0x6f | |
| #define PFUZE100_VGEN5VOL 0x70 | |
| #define PFUZE100_VGEN6VOL 0x71 | |
| enum chips { PFUZE100, PFUZE200, PFUZE3000 = 3 }; | |
| struct pfuze_regulator { | |
| struct regulator_desc desc; | |
| unsigned char stby_reg; | |
| unsigned char stby_mask; | |
| }; | |
| struct pfuze_chip { | |
| int chip_id; | |
| struct regmap *regmap; | |
| struct device *dev; | |
| struct pfuze_regulator regulator_descs[PFUZE100_MAX_REGULATOR]; | |
| struct regulator_dev *regulators[PFUZE100_MAX_REGULATOR]; | |
| struct pfuze_regulator *pfuze_regulators; | |
| }; | |
| static const int pfuze100_swbst[] = { | |
| 5000000, 5050000, 5100000, 5150000, | |
| }; | |
| static const int pfuze100_vsnvs[] = { | |
| 1000000, 1100000, 1200000, 1300000, 1500000, 1800000, 3000000, | |
| }; | |
| static const int pfuze3000_sw2lo[] = { | |
| 1500000, 1550000, 1600000, 1650000, 1700000, 1750000, 1800000, 1850000, | |
| }; | |
| static const int pfuze3000_sw2hi[] = { | |
| 2500000, 2800000, 2850000, 3000000, 3100000, 3150000, 3200000, 3300000, | |
| }; | |
| static const struct i2c_device_id pfuze_device_id[] = { | |
| {.name = "pfuze100", .driver_data = PFUZE100}, | |
| {.name = "pfuze200", .driver_data = PFUZE200}, | |
| {.name = "pfuze3000", .driver_data = PFUZE3000}, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, pfuze_device_id); | |
| static const struct of_device_id pfuze_dt_ids[] = { | |
| { .compatible = "fsl,pfuze100", .data = (void *)PFUZE100}, | |
| { .compatible = "fsl,pfuze200", .data = (void *)PFUZE200}, | |
| { .compatible = "fsl,pfuze3000", .data = (void *)PFUZE3000}, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, pfuze_dt_ids); | |
| static int pfuze100_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) | |
| { | |
| struct pfuze_chip *pfuze100 = rdev_get_drvdata(rdev); | |
| int id = rdev_get_id(rdev); | |
| unsigned int ramp_bits; | |
| int ret; | |
| if (id < PFUZE100_SWBST) { | |
| ramp_delay = 12500 / ramp_delay; | |
| ramp_bits = (ramp_delay >> 1) - (ramp_delay >> 3); | |
| ret = regmap_update_bits(pfuze100->regmap, | |
| rdev->desc->vsel_reg + 4, | |
| 0xc0, ramp_bits << 6); | |
| if (ret < 0) | |
| dev_err(pfuze100->dev, "ramp failed, err %d\n", ret); | |
| } else | |
| ret = -EACCES; | |
| return ret; | |
| } | |
| static struct regulator_ops pfuze100_ldo_regulator_ops = { | |
| .enable = regulator_enable_regmap, | |
| .disable = regulator_disable_regmap, | |
| .is_enabled = regulator_is_enabled_regmap, | |
| .list_voltage = regulator_list_voltage_linear, | |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, | |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, | |
| }; | |
| static struct regulator_ops pfuze100_fixed_regulator_ops = { | |
| .enable = regulator_enable_regmap, | |
| .disable = regulator_disable_regmap, | |
| .is_enabled = regulator_is_enabled_regmap, | |
| .list_voltage = regulator_list_voltage_linear, | |
| }; | |
| static struct regulator_ops pfuze100_sw_regulator_ops = { | |
| .list_voltage = regulator_list_voltage_linear, | |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, | |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, | |
| .set_voltage_time_sel = regulator_set_voltage_time_sel, | |
| .set_ramp_delay = pfuze100_set_ramp_delay, | |
| }; | |
| static struct regulator_ops pfuze100_swb_regulator_ops = { | |
| .enable = regulator_enable_regmap, | |
| .disable = regulator_disable_regmap, | |
| .list_voltage = regulator_list_voltage_table, | |
| .map_voltage = regulator_map_voltage_ascend, | |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, | |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, | |
| }; | |
| #define PFUZE100_FIXED_REG(_chip, _name, base, voltage) \ | |
| [_chip ## _ ## _name] = { \ | |
| .desc = { \ | |
| .name = #_name, \ | |
| .n_voltages = 1, \ | |
| .ops = &pfuze100_fixed_regulator_ops, \ | |
| .type = REGULATOR_VOLTAGE, \ | |
| .id = _chip ## _ ## _name, \ | |
| .owner = THIS_MODULE, \ | |
| .min_uV = (voltage), \ | |
| .enable_reg = (base), \ | |
| .enable_mask = 0x10, \ | |
| }, \ | |
| } | |
| #define PFUZE100_SW_REG(_chip, _name, base, min, max, step) \ | |
| [_chip ## _ ## _name] = { \ | |
| .desc = { \ | |
| .name = #_name,\ | |
| .n_voltages = ((max) - (min)) / (step) + 1, \ | |
| .ops = &pfuze100_sw_regulator_ops, \ | |
| .type = REGULATOR_VOLTAGE, \ | |
| .id = _chip ## _ ## _name, \ | |
| .owner = THIS_MODULE, \ | |
| .min_uV = (min), \ | |
| .uV_step = (step), \ | |
| .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ | |
| .vsel_mask = 0x3f, \ | |
| }, \ | |
| .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \ | |
| .stby_mask = 0x3f, \ | |
| } | |
| #define PFUZE100_SWB_REG(_chip, _name, base, mask, voltages) \ | |
| [_chip ## _ ## _name] = { \ | |
| .desc = { \ | |
| .name = #_name, \ | |
| .n_voltages = ARRAY_SIZE(voltages), \ | |
| .ops = &pfuze100_swb_regulator_ops, \ | |
| .type = REGULATOR_VOLTAGE, \ | |
| .id = _chip ## _ ## _name, \ | |
| .owner = THIS_MODULE, \ | |
| .volt_table = voltages, \ | |
| .vsel_reg = (base), \ | |
| .vsel_mask = (mask), \ | |
| .enable_reg = (base), \ | |
| .enable_mask = 0x48, \ | |
| }, \ | |
| } | |
| #define PFUZE100_VGEN_REG(_chip, _name, base, min, max, step) \ | |
| [_chip ## _ ## _name] = { \ | |
| .desc = { \ | |
| .name = #_name, \ | |
| .n_voltages = ((max) - (min)) / (step) + 1, \ | |
| .ops = &pfuze100_ldo_regulator_ops, \ | |
| .type = REGULATOR_VOLTAGE, \ | |
| .id = _chip ## _ ## _name, \ | |
| .owner = THIS_MODULE, \ | |
| .min_uV = (min), \ | |
| .uV_step = (step), \ | |
| .vsel_reg = (base), \ | |
| .vsel_mask = 0xf, \ | |
| .enable_reg = (base), \ | |
| .enable_mask = 0x10, \ | |
| }, \ | |
| .stby_reg = (base), \ | |
| .stby_mask = 0x20, \ | |
| } | |
| #define PFUZE3000_VCC_REG(_chip, _name, base, min, max, step) { \ | |
| .desc = { \ | |
| .name = #_name, \ | |
| .n_voltages = ((max) - (min)) / (step) + 1, \ | |
| .ops = &pfuze100_ldo_regulator_ops, \ | |
| .type = REGULATOR_VOLTAGE, \ | |
| .id = _chip ## _ ## _name, \ | |
| .owner = THIS_MODULE, \ | |
| .min_uV = (min), \ | |
| .uV_step = (step), \ | |
| .vsel_reg = (base), \ | |
| .vsel_mask = 0x3, \ | |
| .enable_reg = (base), \ | |
| .enable_mask = 0x10, \ | |
| }, \ | |
| .stby_reg = (base), \ | |
| .stby_mask = 0x20, \ | |
| } | |
| #define PFUZE3000_SW2_REG(_chip, _name, base, min, max, step) { \ | |
| .desc = { \ | |
| .name = #_name,\ | |
| .n_voltages = ((max) - (min)) / (step) + 1, \ | |
| .ops = &pfuze100_sw_regulator_ops, \ | |
| .type = REGULATOR_VOLTAGE, \ | |
| .id = _chip ## _ ## _name, \ | |
| .owner = THIS_MODULE, \ | |
| .min_uV = (min), \ | |
| .uV_step = (step), \ | |
| .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ | |
| .vsel_mask = 0x7, \ | |
| }, \ | |
| .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \ | |
| .stby_mask = 0x7, \ | |
| } | |
| #define PFUZE3000_SW3_REG(_chip, _name, base, min, max, step) { \ | |
| .desc = { \ | |
| .name = #_name,\ | |
| .n_voltages = ((max) - (min)) / (step) + 1, \ | |
| .ops = &pfuze100_sw_regulator_ops, \ | |
| .type = REGULATOR_VOLTAGE, \ | |
| .id = _chip ## _ ## _name, \ | |
| .owner = THIS_MODULE, \ | |
| .min_uV = (min), \ | |
| .uV_step = (step), \ | |
| .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ | |
| .vsel_mask = 0xf, \ | |
| }, \ | |
| .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \ | |
| .stby_mask = 0xf, \ | |
| } | |
| /* PFUZE100 */ | |
| static struct pfuze_regulator pfuze100_regulators[] = { | |
| PFUZE100_SW_REG(PFUZE100, SW1AB, PFUZE100_SW1ABVOL, 300000, 1875000, 25000), | |
| PFUZE100_SW_REG(PFUZE100, SW1C, PFUZE100_SW1CVOL, 300000, 1875000, 25000), | |
| PFUZE100_SW_REG(PFUZE100, SW2, PFUZE100_SW2VOL, 400000, 1975000, 25000), | |
| PFUZE100_SW_REG(PFUZE100, SW3A, PFUZE100_SW3AVOL, 400000, 1975000, 25000), | |
| PFUZE100_SW_REG(PFUZE100, SW3B, PFUZE100_SW3BVOL, 400000, 1975000, 25000), | |
| PFUZE100_SW_REG(PFUZE100, SW4, PFUZE100_SW4VOL, 400000, 1975000, 25000), | |
| PFUZE100_SWB_REG(PFUZE100, SWBST, PFUZE100_SWBSTCON1, 0x3 , pfuze100_swbst), | |
| PFUZE100_SWB_REG(PFUZE100, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), | |
| PFUZE100_FIXED_REG(PFUZE100, VREFDDR, PFUZE100_VREFDDRCON, 750000), | |
| PFUZE100_VGEN_REG(PFUZE100, VGEN1, PFUZE100_VGEN1VOL, 800000, 1550000, 50000), | |
| PFUZE100_VGEN_REG(PFUZE100, VGEN2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000), | |
| PFUZE100_VGEN_REG(PFUZE100, VGEN3, PFUZE100_VGEN3VOL, 1800000, 3300000, 100000), | |
| PFUZE100_VGEN_REG(PFUZE100, VGEN4, PFUZE100_VGEN4VOL, 1800000, 3300000, 100000), | |
| PFUZE100_VGEN_REG(PFUZE100, VGEN5, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000), | |
| PFUZE100_VGEN_REG(PFUZE100, VGEN6, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000), | |
| }; | |
| static struct pfuze_regulator pfuze200_regulators[] = { | |
| PFUZE100_SW_REG(PFUZE200, SW1AB, PFUZE100_SW1ABVOL, 300000, 1875000, 25000), | |
| PFUZE100_SW_REG(PFUZE200, SW2, PFUZE100_SW2VOL, 400000, 1975000, 25000), | |
| PFUZE100_SW_REG(PFUZE200, SW3A, PFUZE100_SW3AVOL, 400000, 1975000, 25000), | |
| PFUZE100_SW_REG(PFUZE200, SW3B, PFUZE100_SW3BVOL, 400000, 1975000, 25000), | |
| PFUZE100_SWB_REG(PFUZE200, SWBST, PFUZE100_SWBSTCON1, 0x3 , pfuze100_swbst), | |
| PFUZE100_SWB_REG(PFUZE200, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), | |
| PFUZE100_FIXED_REG(PFUZE200, VREFDDR, PFUZE100_VREFDDRCON, 750000), | |
| PFUZE100_VGEN_REG(PFUZE200, VGEN1, PFUZE100_VGEN1VOL, 800000, 1550000, 50000), | |
| PFUZE100_VGEN_REG(PFUZE200, VGEN2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000), | |
| PFUZE100_VGEN_REG(PFUZE200, VGEN3, PFUZE100_VGEN3VOL, 1800000, 3300000, 100000), | |
| PFUZE100_VGEN_REG(PFUZE200, VGEN4, PFUZE100_VGEN4VOL, 1800000, 3300000, 100000), | |
| PFUZE100_VGEN_REG(PFUZE200, VGEN5, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000), | |
| PFUZE100_VGEN_REG(PFUZE200, VGEN6, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000), | |
| }; | |
| static struct pfuze_regulator pfuze3000_regulators[] = { | |
| PFUZE100_SW_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 700000, 1475000, 25000), | |
| PFUZE100_SW_REG(PFUZE3000, SW1B, PFUZE100_SW1CVOL, 700000, 1475000, 25000), | |
| PFUZE100_SWB_REG(PFUZE3000, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo), | |
| PFUZE3000_SW3_REG(PFUZE3000, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000), | |
| PFUZE100_SWB_REG(PFUZE3000, SWBST, PFUZE100_SWBSTCON1, 0x3, pfuze100_swbst), | |
| PFUZE100_SWB_REG(PFUZE3000, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), | |
| PFUZE100_FIXED_REG(PFUZE3000, VREFDDR, PFUZE100_VREFDDRCON, 750000), | |
| PFUZE100_VGEN_REG(PFUZE3000, VLDO1, PFUZE100_VGEN1VOL, 1800000, 3300000, 100000), | |
| PFUZE100_VGEN_REG(PFUZE3000, VLDO2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000), | |
| PFUZE3000_VCC_REG(PFUZE3000, VCCSD, PFUZE100_VGEN3VOL, 2850000, 3300000, 150000), | |
| PFUZE3000_VCC_REG(PFUZE3000, V33, PFUZE100_VGEN4VOL, 2850000, 3300000, 150000), | |
| PFUZE100_VGEN_REG(PFUZE3000, VLDO3, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000), | |
| PFUZE100_VGEN_REG(PFUZE3000, VLDO4, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000), | |
| }; | |
| #ifdef CONFIG_OF | |
| /* PFUZE100 */ | |
| static struct of_regulator_match pfuze100_matches[] = { | |
| { .name = "sw1ab", }, | |
| { .name = "sw1c", }, | |
| { .name = "sw2", }, | |
| { .name = "sw3a", }, | |
| { .name = "sw3b", }, | |
| { .name = "sw4", }, | |
| { .name = "swbst", }, | |
| { .name = "vsnvs", }, | |
| { .name = "vrefddr", }, | |
| { .name = "vgen1", }, | |
| { .name = "vgen2", }, | |
| { .name = "vgen3", }, | |
| { .name = "vgen4", }, | |
| { .name = "vgen5", }, | |
| { .name = "vgen6", }, | |
| }; | |
| /* PFUZE200 */ | |
| static struct of_regulator_match pfuze200_matches[] = { | |
| { .name = "sw1ab", }, | |
| { .name = "sw2", }, | |
| { .name = "sw3a", }, | |
| { .name = "sw3b", }, | |
| { .name = "swbst", }, | |
| { .name = "vsnvs", }, | |
| { .name = "vrefddr", }, | |
| { .name = "vgen1", }, | |
| { .name = "vgen2", }, | |
| { .name = "vgen3", }, | |
| { .name = "vgen4", }, | |
| { .name = "vgen5", }, | |
| { .name = "vgen6", }, | |
| }; | |
| /* PFUZE3000 */ | |
| static struct of_regulator_match pfuze3000_matches[] = { | |
| { .name = "sw1a", }, | |
| { .name = "sw1b", }, | |
| { .name = "sw2", }, | |
| { .name = "sw3", }, | |
| { .name = "swbst", }, | |
| { .name = "vsnvs", }, | |
| { .name = "vrefddr", }, | |
| { .name = "vldo1", }, | |
| { .name = "vldo2", }, | |
| { .name = "vccsd", }, | |
| { .name = "v33", }, | |
| { .name = "vldo3", }, | |
| { .name = "vldo4", }, | |
| }; | |
| static struct of_regulator_match *pfuze_matches; | |
| static int pfuze_parse_regulators_dt(struct pfuze_chip *chip) | |
| { | |
| struct device *dev = chip->dev; | |
| struct device_node *np, *parent; | |
| int ret; | |
| np = of_node_get(dev->of_node); | |
| if (!np) | |
| return -EINVAL; | |
| parent = of_get_child_by_name(np, "regulators"); | |
| if (!parent) { | |
| dev_err(dev, "regulators node not found\n"); | |
| return -EINVAL; | |
| } | |
| switch (chip->chip_id) { | |
| case PFUZE3000: | |
| pfuze_matches = pfuze3000_matches; | |
| ret = of_regulator_match(dev, parent, pfuze3000_matches, | |
| ARRAY_SIZE(pfuze3000_matches)); | |
| break; | |
| case PFUZE200: | |
| pfuze_matches = pfuze200_matches; | |
| ret = of_regulator_match(dev, parent, pfuze200_matches, | |
| ARRAY_SIZE(pfuze200_matches)); | |
| break; | |
| case PFUZE100: | |
| default: | |
| pfuze_matches = pfuze100_matches; | |
| ret = of_regulator_match(dev, parent, pfuze100_matches, | |
| ARRAY_SIZE(pfuze100_matches)); | |
| break; | |
| } | |
| of_node_put(parent); | |
| if (ret < 0) { | |
| dev_err(dev, "Error parsing regulator init data: %d\n", | |
| ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static inline struct regulator_init_data *match_init_data(int index) | |
| { | |
| return pfuze_matches[index].init_data; | |
| } | |
| static inline struct device_node *match_of_node(int index) | |
| { | |
| return pfuze_matches[index].of_node; | |
| } | |
| #else | |
| static int pfuze_parse_regulators_dt(struct pfuze_chip *chip) | |
| { | |
| return 0; | |
| } | |
| static inline struct regulator_init_data *match_init_data(int index) | |
| { | |
| return NULL; | |
| } | |
| static inline struct device_node *match_of_node(int index) | |
| { | |
| return NULL; | |
| } | |
| #endif | |
| static int pfuze_identify(struct pfuze_chip *pfuze_chip) | |
| { | |
| unsigned int value; | |
| int ret; | |
| ret = regmap_read(pfuze_chip->regmap, PFUZE100_DEVICEID, &value); | |
| if (ret) | |
| return ret; | |
| if (((value & 0x0f) == 0x8) && (pfuze_chip->chip_id == PFUZE100)) { | |
| /* | |
| * Freescale misprogrammed 1-3% of parts prior to week 8 of 2013 | |
| * as ID=8 in PFUZE100 | |
| */ | |
| dev_info(pfuze_chip->dev, "Assuming misprogrammed ID=0x8"); | |
| } else if ((value & 0x0f) != pfuze_chip->chip_id && | |
| (value & 0xf0) >> 4 != pfuze_chip->chip_id) { | |
| /* device id NOT match with your setting */ | |
| dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value); | |
| return -ENODEV; | |
| } | |
| ret = regmap_read(pfuze_chip->regmap, PFUZE100_REVID, &value); | |
| if (ret) | |
| return ret; | |
| dev_info(pfuze_chip->dev, | |
| "Full layer: %x, Metal layer: %x\n", | |
| (value & 0xf0) >> 4, value & 0x0f); | |
| ret = regmap_read(pfuze_chip->regmap, PFUZE100_FABID, &value); | |
| if (ret) | |
| return ret; | |
| dev_info(pfuze_chip->dev, "FAB: %x, FIN: %x\n", | |
| (value & 0xc) >> 2, value & 0x3); | |
| return 0; | |
| } | |
| static const struct regmap_config pfuze_regmap_config = { | |
| .reg_bits = 8, | |
| .val_bits = 8, | |
| .max_register = PFUZE_NUMREGS - 1, | |
| .cache_type = REGCACHE_RBTREE, | |
| }; | |
| static int pfuze100_regulator_probe(struct i2c_client *client, | |
| const struct i2c_device_id *id) | |
| { | |
| struct pfuze_chip *pfuze_chip; | |
| struct pfuze_regulator_platform_data *pdata = | |
| dev_get_platdata(&client->dev); | |
| struct regulator_config config = { }; | |
| int i, ret; | |
| const struct of_device_id *match; | |
| u32 regulator_num; | |
| u32 sw_check_start, sw_check_end, sw_hi = 0x40; | |
| pfuze_chip = devm_kzalloc(&client->dev, sizeof(*pfuze_chip), | |
| GFP_KERNEL); | |
| if (!pfuze_chip) | |
| return -ENOMEM; | |
| if (client->dev.of_node) { | |
| match = of_match_device(of_match_ptr(pfuze_dt_ids), | |
| &client->dev); | |
| if (!match) { | |
| dev_err(&client->dev, "Error: No device match found\n"); | |
| return -ENODEV; | |
| } | |
| pfuze_chip->chip_id = (int)(long)match->data; | |
| } else if (id) { | |
| pfuze_chip->chip_id = id->driver_data; | |
| } else { | |
| dev_err(&client->dev, "No dts match or id table match found\n"); | |
| return -ENODEV; | |
| } | |
| i2c_set_clientdata(client, pfuze_chip); | |
| pfuze_chip->dev = &client->dev; | |
| pfuze_chip->regmap = devm_regmap_init_i2c(client, &pfuze_regmap_config); | |
| if (IS_ERR(pfuze_chip->regmap)) { | |
| ret = PTR_ERR(pfuze_chip->regmap); | |
| dev_err(&client->dev, | |
| "regmap allocation failed with err %d\n", ret); | |
| return ret; | |
| } | |
| ret = pfuze_identify(pfuze_chip); | |
| if (ret) { | |
| dev_err(&client->dev, "unrecognized pfuze chip ID!\n"); | |
| return ret; | |
| } | |
| /* use the right regulators after identify the right device */ | |
| switch (pfuze_chip->chip_id) { | |
| case PFUZE3000: | |
| pfuze_chip->pfuze_regulators = pfuze3000_regulators; | |
| regulator_num = ARRAY_SIZE(pfuze3000_regulators); | |
| sw_check_start = PFUZE3000_SW2; | |
| sw_check_end = PFUZE3000_SW2; | |
| sw_hi = 1 << 3; | |
| break; | |
| case PFUZE200: | |
| pfuze_chip->pfuze_regulators = pfuze200_regulators; | |
| regulator_num = ARRAY_SIZE(pfuze200_regulators); | |
| sw_check_start = PFUZE200_SW2; | |
| sw_check_end = PFUZE200_SW3B; | |
| break; | |
| case PFUZE100: | |
| default: | |
| pfuze_chip->pfuze_regulators = pfuze100_regulators; | |
| regulator_num = ARRAY_SIZE(pfuze100_regulators); | |
| sw_check_start = PFUZE100_SW2; | |
| sw_check_end = PFUZE100_SW4; | |
| break; | |
| } | |
| dev_info(&client->dev, "pfuze%s found.\n", | |
| (pfuze_chip->chip_id == PFUZE100) ? "100" : | |
| ((pfuze_chip->chip_id == PFUZE200) ? "200" : "3000")); | |
| memcpy(pfuze_chip->regulator_descs, pfuze_chip->pfuze_regulators, | |
| sizeof(pfuze_chip->regulator_descs)); | |
| ret = pfuze_parse_regulators_dt(pfuze_chip); | |
| if (ret) | |
| return ret; | |
| for (i = 0; i < regulator_num; i++) { | |
| struct regulator_init_data *init_data; | |
| struct regulator_desc *desc; | |
| int val; | |
| desc = &pfuze_chip->regulator_descs[i].desc; | |
| if (pdata) | |
| init_data = pdata->init_data[i]; | |
| else | |
| init_data = match_init_data(i); | |
| /* SW2~SW4 high bit check and modify the voltage value table */ | |
| if (i >= sw_check_start && i <= sw_check_end) { | |
| regmap_read(pfuze_chip->regmap, desc->vsel_reg, &val); | |
| if (val & sw_hi) { | |
| if (pfuze_chip->chip_id == PFUZE3000) { | |
| desc->volt_table = pfuze3000_sw2hi; | |
| desc->n_voltages = ARRAY_SIZE(pfuze3000_sw2hi); | |
| } else { | |
| desc->min_uV = 800000; | |
| desc->uV_step = 50000; | |
| desc->n_voltages = 51; | |
| } | |
| } | |
| } | |
| config.dev = &client->dev; | |
| config.init_data = init_data; | |
| config.driver_data = pfuze_chip; | |
| config.of_node = match_of_node(i); | |
| config.ena_gpio = -EINVAL; | |
| pfuze_chip->regulators[i] = | |
| devm_regulator_register(&client->dev, desc, &config); | |
| if (IS_ERR(pfuze_chip->regulators[i])) { | |
| dev_err(&client->dev, "register regulator%s failed\n", | |
| pfuze_chip->pfuze_regulators[i].desc.name); | |
| return PTR_ERR(pfuze_chip->regulators[i]); | |
| } | |
| } | |
| return 0; | |
| } | |
| static struct i2c_driver pfuze_driver = { | |
| .id_table = pfuze_device_id, | |
| .driver = { | |
| .name = "pfuze100-regulator", | |
| .of_match_table = pfuze_dt_ids, | |
| }, | |
| .probe = pfuze100_regulator_probe, | |
| }; | |
| module_i2c_driver(pfuze_driver); | |
| MODULE_AUTHOR("Robin Gong <b38343@freescale.com>"); | |
| MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100/200/3000 PMIC"); | |
| MODULE_LICENSE("GPL v2"); |