| /* | |
| * pv88080-regulator.c - Regulator device driver for PV88080 | |
| * Copyright (C) 2016 Powerventure Semiconductor Ltd. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; either version 2 | |
| * of the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| */ | |
| #include <linux/err.h> | |
| #include <linux/i2c.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/init.h> | |
| #include <linux/slab.h> | |
| #include <linux/regulator/driver.h> | |
| #include <linux/regulator/machine.h> | |
| #include <linux/regmap.h> | |
| #include <linux/irq.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/regulator/of_regulator.h> | |
| #include "pv88080-regulator.h" | |
| #define PV88080_MAX_REGULATORS 4 | |
| /* PV88080 REGULATOR IDs */ | |
| enum { | |
| /* BUCKs */ | |
| PV88080_ID_BUCK1, | |
| PV88080_ID_BUCK2, | |
| PV88080_ID_BUCK3, | |
| PV88080_ID_HVBUCK, | |
| }; | |
| enum pv88080_types { | |
| TYPE_PV88080_AA, | |
| TYPE_PV88080_BA, | |
| }; | |
| struct pv88080_regulator { | |
| struct regulator_desc desc; | |
| /* Current limiting */ | |
| unsigned int n_current_limits; | |
| const int *current_limits; | |
| unsigned int limit_mask; | |
| unsigned int mode_reg; | |
| unsigned int limit_reg; | |
| unsigned int conf2; | |
| unsigned int conf5; | |
| }; | |
| struct pv88080 { | |
| struct device *dev; | |
| struct regmap *regmap; | |
| struct regulator_dev *rdev[PV88080_MAX_REGULATORS]; | |
| unsigned long type; | |
| const struct pv88080_compatible_regmap *regmap_config; | |
| }; | |
| struct pv88080_buck_voltage { | |
| int min_uV; | |
| int max_uV; | |
| int uV_step; | |
| }; | |
| struct pv88080_buck_regmap { | |
| /* REGS */ | |
| int buck_enable_reg; | |
| int buck_vsel_reg; | |
| int buck_mode_reg; | |
| int buck_limit_reg; | |
| int buck_vdac_range_reg; | |
| int buck_vrange_gain_reg; | |
| /* MASKS */ | |
| int buck_enable_mask; | |
| int buck_vsel_mask; | |
| int buck_limit_mask; | |
| }; | |
| struct pv88080_compatible_regmap { | |
| /* BUCK1, 2, 3 */ | |
| struct pv88080_buck_regmap buck_regmap[PV88080_MAX_REGULATORS-1]; | |
| /* HVBUCK */ | |
| int hvbuck_enable_reg; | |
| int hvbuck_vsel_reg; | |
| int hvbuck_enable_mask; | |
| int hvbuck_vsel_mask; | |
| }; | |
| static const struct regmap_config pv88080_regmap_config = { | |
| .reg_bits = 8, | |
| .val_bits = 8, | |
| }; | |
| /* Current limits array (in uA) for BUCK1, BUCK2, BUCK3. | |
| * Entry indexes corresponds to register values. | |
| */ | |
| static const int pv88080_buck1_limits[] = { | |
| 3230000, 5130000, 6960000, 8790000 | |
| }; | |
| static const int pv88080_buck23_limits[] = { | |
| 1496000, 2393000, 3291000, 4189000 | |
| }; | |
| static const struct pv88080_buck_voltage pv88080_buck_vol[2] = { | |
| { | |
| .min_uV = 600000, | |
| .max_uV = 1393750, | |
| .uV_step = 6250, | |
| }, | |
| { | |
| .min_uV = 1400000, | |
| .max_uV = 2193750, | |
| .uV_step = 6250, | |
| }, | |
| }; | |
| static const struct pv88080_compatible_regmap pv88080_aa_regs = { | |
| /* BUCK1 */ | |
| .buck_regmap[0] = { | |
| .buck_enable_reg = PV88080AA_REG_BUCK1_CONF0, | |
| .buck_vsel_reg = PV88080AA_REG_BUCK1_CONF0, | |
| .buck_mode_reg = PV88080AA_REG_BUCK1_CONF1, | |
| .buck_limit_reg = PV88080AA_REG_BUCK1_CONF1, | |
| .buck_vdac_range_reg = PV88080AA_REG_BUCK1_CONF2, | |
| .buck_vrange_gain_reg = PV88080AA_REG_BUCK1_CONF5, | |
| .buck_enable_mask = PV88080_BUCK1_EN, | |
| .buck_vsel_mask = PV88080_VBUCK1_MASK, | |
| .buck_limit_mask = PV88080_BUCK1_ILIM_MASK, | |
| }, | |
| /* BUCK2 */ | |
| .buck_regmap[1] = { | |
| .buck_enable_reg = PV88080AA_REG_BUCK2_CONF0, | |
| .buck_vsel_reg = PV88080AA_REG_BUCK2_CONF0, | |
| .buck_mode_reg = PV88080AA_REG_BUCK2_CONF1, | |
| .buck_limit_reg = PV88080AA_REG_BUCK2_CONF1, | |
| .buck_vdac_range_reg = PV88080AA_REG_BUCK2_CONF2, | |
| .buck_vrange_gain_reg = PV88080AA_REG_BUCK2_CONF5, | |
| .buck_enable_mask = PV88080_BUCK2_EN, | |
| .buck_vsel_mask = PV88080_VBUCK2_MASK, | |
| .buck_limit_mask = PV88080_BUCK2_ILIM_MASK, | |
| }, | |
| /* BUCK3 */ | |
| .buck_regmap[2] = { | |
| .buck_enable_reg = PV88080AA_REG_BUCK3_CONF0, | |
| .buck_vsel_reg = PV88080AA_REG_BUCK3_CONF0, | |
| .buck_mode_reg = PV88080AA_REG_BUCK3_CONF1, | |
| .buck_limit_reg = PV88080AA_REG_BUCK3_CONF1, | |
| .buck_vdac_range_reg = PV88080AA_REG_BUCK3_CONF2, | |
| .buck_vrange_gain_reg = PV88080AA_REG_BUCK3_CONF5, | |
| .buck_enable_mask = PV88080_BUCK3_EN, | |
| .buck_vsel_mask = PV88080_VBUCK3_MASK, | |
| .buck_limit_mask = PV88080_BUCK3_ILIM_MASK, | |
| }, | |
| /* HVBUCK */ | |
| .hvbuck_enable_reg = PV88080AA_REG_HVBUCK_CONF2, | |
| .hvbuck_vsel_reg = PV88080AA_REG_HVBUCK_CONF1, | |
| .hvbuck_enable_mask = PV88080_HVBUCK_EN, | |
| .hvbuck_vsel_mask = PV88080_VHVBUCK_MASK, | |
| }; | |
| static const struct pv88080_compatible_regmap pv88080_ba_regs = { | |
| /* BUCK1 */ | |
| .buck_regmap[0] = { | |
| .buck_enable_reg = PV88080BA_REG_BUCK1_CONF0, | |
| .buck_vsel_reg = PV88080BA_REG_BUCK1_CONF0, | |
| .buck_mode_reg = PV88080BA_REG_BUCK1_CONF1, | |
| .buck_limit_reg = PV88080BA_REG_BUCK1_CONF1, | |
| .buck_vdac_range_reg = PV88080BA_REG_BUCK1_CONF2, | |
| .buck_vrange_gain_reg = PV88080BA_REG_BUCK1_CONF5, | |
| .buck_enable_mask = PV88080_BUCK1_EN, | |
| .buck_vsel_mask = PV88080_VBUCK1_MASK, | |
| .buck_limit_mask = PV88080_BUCK1_ILIM_MASK, | |
| }, | |
| /* BUCK2 */ | |
| .buck_regmap[1] = { | |
| .buck_enable_reg = PV88080BA_REG_BUCK2_CONF0, | |
| .buck_vsel_reg = PV88080BA_REG_BUCK2_CONF0, | |
| .buck_mode_reg = PV88080BA_REG_BUCK2_CONF1, | |
| .buck_limit_reg = PV88080BA_REG_BUCK2_CONF1, | |
| .buck_vdac_range_reg = PV88080BA_REG_BUCK2_CONF2, | |
| .buck_vrange_gain_reg = PV88080BA_REG_BUCK2_CONF5, | |
| .buck_enable_mask = PV88080_BUCK2_EN, | |
| .buck_vsel_mask = PV88080_VBUCK2_MASK, | |
| .buck_limit_mask = PV88080_BUCK2_ILIM_MASK, | |
| }, | |
| /* BUCK3 */ | |
| .buck_regmap[2] = { | |
| .buck_enable_reg = PV88080BA_REG_BUCK3_CONF0, | |
| .buck_vsel_reg = PV88080BA_REG_BUCK3_CONF0, | |
| .buck_mode_reg = PV88080BA_REG_BUCK3_CONF1, | |
| .buck_limit_reg = PV88080BA_REG_BUCK3_CONF1, | |
| .buck_vdac_range_reg = PV88080BA_REG_BUCK3_CONF2, | |
| .buck_vrange_gain_reg = PV88080BA_REG_BUCK3_CONF5, | |
| .buck_enable_mask = PV88080_BUCK3_EN, | |
| .buck_vsel_mask = PV88080_VBUCK3_MASK, | |
| .buck_limit_mask = PV88080_BUCK3_ILIM_MASK, | |
| }, | |
| /* HVBUCK */ | |
| .hvbuck_enable_reg = PV88080BA_REG_HVBUCK_CONF2, | |
| .hvbuck_vsel_reg = PV88080BA_REG_HVBUCK_CONF1, | |
| .hvbuck_enable_mask = PV88080_HVBUCK_EN, | |
| .hvbuck_vsel_mask = PV88080_VHVBUCK_MASK, | |
| }; | |
| #ifdef CONFIG_OF | |
| static const struct of_device_id pv88080_dt_ids[] = { | |
| { .compatible = "pvs,pv88080", .data = (void *)TYPE_PV88080_AA }, | |
| { .compatible = "pvs,pv88080-aa", .data = (void *)TYPE_PV88080_AA }, | |
| { .compatible = "pvs,pv88080-ba", .data = (void *)TYPE_PV88080_BA }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, pv88080_dt_ids); | |
| #endif | |
| static unsigned int pv88080_buck_get_mode(struct regulator_dev *rdev) | |
| { | |
| struct pv88080_regulator *info = rdev_get_drvdata(rdev); | |
| unsigned int data; | |
| int ret, mode = 0; | |
| ret = regmap_read(rdev->regmap, info->mode_reg, &data); | |
| if (ret < 0) | |
| return ret; | |
| switch (data & PV88080_BUCK1_MODE_MASK) { | |
| case PV88080_BUCK_MODE_SYNC: | |
| mode = REGULATOR_MODE_FAST; | |
| break; | |
| case PV88080_BUCK_MODE_AUTO: | |
| mode = REGULATOR_MODE_NORMAL; | |
| break; | |
| case PV88080_BUCK_MODE_SLEEP: | |
| mode = REGULATOR_MODE_STANDBY; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return mode; | |
| } | |
| static int pv88080_buck_set_mode(struct regulator_dev *rdev, | |
| unsigned int mode) | |
| { | |
| struct pv88080_regulator *info = rdev_get_drvdata(rdev); | |
| int val = 0; | |
| switch (mode) { | |
| case REGULATOR_MODE_FAST: | |
| val = PV88080_BUCK_MODE_SYNC; | |
| break; | |
| case REGULATOR_MODE_NORMAL: | |
| val = PV88080_BUCK_MODE_AUTO; | |
| break; | |
| case REGULATOR_MODE_STANDBY: | |
| val = PV88080_BUCK_MODE_SLEEP; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return regmap_update_bits(rdev->regmap, info->mode_reg, | |
| PV88080_BUCK1_MODE_MASK, val); | |
| } | |
| static int pv88080_set_current_limit(struct regulator_dev *rdev, int min, | |
| int max) | |
| { | |
| struct pv88080_regulator *info = rdev_get_drvdata(rdev); | |
| int i; | |
| /* search for closest to maximum */ | |
| for (i = info->n_current_limits; i >= 0; i--) { | |
| if (min <= info->current_limits[i] | |
| && max >= info->current_limits[i]) { | |
| return regmap_update_bits(rdev->regmap, | |
| info->limit_reg, | |
| info->limit_mask, | |
| i << PV88080_BUCK1_ILIM_SHIFT); | |
| } | |
| } | |
| return -EINVAL; | |
| } | |
| static int pv88080_get_current_limit(struct regulator_dev *rdev) | |
| { | |
| struct pv88080_regulator *info = rdev_get_drvdata(rdev); | |
| unsigned int data; | |
| int ret; | |
| ret = regmap_read(rdev->regmap, info->limit_reg, &data); | |
| if (ret < 0) | |
| return ret; | |
| data = (data & info->limit_mask) >> PV88080_BUCK1_ILIM_SHIFT; | |
| return info->current_limits[data]; | |
| } | |
| static struct regulator_ops pv88080_buck_ops = { | |
| .get_mode = pv88080_buck_get_mode, | |
| .set_mode = pv88080_buck_set_mode, | |
| .enable = regulator_enable_regmap, | |
| .disable = regulator_disable_regmap, | |
| .is_enabled = regulator_is_enabled_regmap, | |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, | |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, | |
| .list_voltage = regulator_list_voltage_linear, | |
| .set_current_limit = pv88080_set_current_limit, | |
| .get_current_limit = pv88080_get_current_limit, | |
| }; | |
| static struct regulator_ops pv88080_hvbuck_ops = { | |
| .enable = regulator_enable_regmap, | |
| .disable = regulator_disable_regmap, | |
| .is_enabled = regulator_is_enabled_regmap, | |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, | |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, | |
| .list_voltage = regulator_list_voltage_linear, | |
| }; | |
| #define PV88080_BUCK(chip, regl_name, min, step, max, limits_array) \ | |
| {\ | |
| .desc = {\ | |
| .id = chip##_ID_##regl_name,\ | |
| .name = __stringify(chip##_##regl_name),\ | |
| .of_match = of_match_ptr(#regl_name),\ | |
| .regulators_node = of_match_ptr("regulators"),\ | |
| .type = REGULATOR_VOLTAGE,\ | |
| .owner = THIS_MODULE,\ | |
| .ops = &pv88080_buck_ops,\ | |
| .min_uV = min, \ | |
| .uV_step = step, \ | |
| .n_voltages = ((max) - (min))/(step) + 1, \ | |
| },\ | |
| .current_limits = limits_array, \ | |
| .n_current_limits = ARRAY_SIZE(limits_array), \ | |
| } | |
| #define PV88080_HVBUCK(chip, regl_name, min, step, max) \ | |
| {\ | |
| .desc = {\ | |
| .id = chip##_ID_##regl_name,\ | |
| .name = __stringify(chip##_##regl_name),\ | |
| .of_match = of_match_ptr(#regl_name),\ | |
| .regulators_node = of_match_ptr("regulators"),\ | |
| .type = REGULATOR_VOLTAGE,\ | |
| .owner = THIS_MODULE,\ | |
| .ops = &pv88080_hvbuck_ops,\ | |
| .min_uV = min, \ | |
| .uV_step = step, \ | |
| .n_voltages = ((max) - (min))/(step) + 1, \ | |
| },\ | |
| } | |
| static struct pv88080_regulator pv88080_regulator_info[] = { | |
| PV88080_BUCK(PV88080, BUCK1, 600000, 6250, 1393750, | |
| pv88080_buck1_limits), | |
| PV88080_BUCK(PV88080, BUCK2, 600000, 6250, 1393750, | |
| pv88080_buck23_limits), | |
| PV88080_BUCK(PV88080, BUCK3, 600000, 6250, 1393750, | |
| pv88080_buck23_limits), | |
| PV88080_HVBUCK(PV88080, HVBUCK, 0, 5000, 1275000), | |
| }; | |
| static irqreturn_t pv88080_irq_handler(int irq, void *data) | |
| { | |
| struct pv88080 *chip = data; | |
| int i, reg_val, err, ret = IRQ_NONE; | |
| err = regmap_read(chip->regmap, PV88080_REG_EVENT_A, ®_val); | |
| if (err < 0) | |
| goto error_i2c; | |
| if (reg_val & PV88080_E_VDD_FLT) { | |
| for (i = 0; i < PV88080_MAX_REGULATORS; i++) { | |
| if (chip->rdev[i] != NULL) { | |
| regulator_notifier_call_chain(chip->rdev[i], | |
| REGULATOR_EVENT_UNDER_VOLTAGE, | |
| NULL); | |
| } | |
| } | |
| err = regmap_write(chip->regmap, PV88080_REG_EVENT_A, | |
| PV88080_E_VDD_FLT); | |
| if (err < 0) | |
| goto error_i2c; | |
| ret = IRQ_HANDLED; | |
| } | |
| if (reg_val & PV88080_E_OVER_TEMP) { | |
| for (i = 0; i < PV88080_MAX_REGULATORS; i++) { | |
| if (chip->rdev[i] != NULL) { | |
| regulator_notifier_call_chain(chip->rdev[i], | |
| REGULATOR_EVENT_OVER_TEMP, | |
| NULL); | |
| } | |
| } | |
| err = regmap_write(chip->regmap, PV88080_REG_EVENT_A, | |
| PV88080_E_OVER_TEMP); | |
| if (err < 0) | |
| goto error_i2c; | |
| ret = IRQ_HANDLED; | |
| } | |
| return ret; | |
| error_i2c: | |
| dev_err(chip->dev, "I2C error : %d\n", err); | |
| return IRQ_NONE; | |
| } | |
| /* | |
| * I2C driver interface functions | |
| */ | |
| static int pv88080_i2c_probe(struct i2c_client *i2c, | |
| const struct i2c_device_id *id) | |
| { | |
| struct regulator_init_data *init_data = dev_get_platdata(&i2c->dev); | |
| struct pv88080 *chip; | |
| const struct pv88080_compatible_regmap *regmap_config; | |
| const struct of_device_id *match; | |
| struct regulator_config config = { }; | |
| int i, error, ret; | |
| unsigned int conf2, conf5; | |
| chip = devm_kzalloc(&i2c->dev, sizeof(struct pv88080), GFP_KERNEL); | |
| if (!chip) | |
| return -ENOMEM; | |
| chip->dev = &i2c->dev; | |
| chip->regmap = devm_regmap_init_i2c(i2c, &pv88080_regmap_config); | |
| if (IS_ERR(chip->regmap)) { | |
| error = PTR_ERR(chip->regmap); | |
| dev_err(chip->dev, "Failed to allocate register map: %d\n", | |
| error); | |
| return error; | |
| } | |
| if (i2c->dev.of_node) { | |
| match = of_match_node(pv88080_dt_ids, i2c->dev.of_node); | |
| if (!match) { | |
| dev_err(chip->dev, "Failed to get of_match_node\n"); | |
| return -EINVAL; | |
| } | |
| chip->type = (unsigned long)match->data; | |
| } else { | |
| chip->type = id->driver_data; | |
| } | |
| i2c_set_clientdata(i2c, chip); | |
| if (i2c->irq != 0) { | |
| ret = regmap_write(chip->regmap, PV88080_REG_MASK_A, 0xFF); | |
| if (ret < 0) { | |
| dev_err(chip->dev, | |
| "Failed to mask A reg: %d\n", ret); | |
| return ret; | |
| } | |
| ret = regmap_write(chip->regmap, PV88080_REG_MASK_B, 0xFF); | |
| if (ret < 0) { | |
| dev_err(chip->dev, | |
| "Failed to mask B reg: %d\n", ret); | |
| return ret; | |
| } | |
| ret = regmap_write(chip->regmap, PV88080_REG_MASK_C, 0xFF); | |
| if (ret < 0) { | |
| dev_err(chip->dev, | |
| "Failed to mask C reg: %d\n", ret); | |
| return ret; | |
| } | |
| ret = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL, | |
| pv88080_irq_handler, | |
| IRQF_TRIGGER_LOW|IRQF_ONESHOT, | |
| "pv88080", chip); | |
| if (ret != 0) { | |
| dev_err(chip->dev, "Failed to request IRQ: %d\n", | |
| i2c->irq); | |
| return ret; | |
| } | |
| ret = regmap_update_bits(chip->regmap, PV88080_REG_MASK_A, | |
| PV88080_M_VDD_FLT | PV88080_M_OVER_TEMP, 0); | |
| if (ret < 0) { | |
| dev_err(chip->dev, | |
| "Failed to update mask reg: %d\n", ret); | |
| return ret; | |
| } | |
| } else { | |
| dev_warn(chip->dev, "No IRQ configured\n"); | |
| } | |
| switch (chip->type) { | |
| case TYPE_PV88080_AA: | |
| chip->regmap_config = &pv88080_aa_regs; | |
| break; | |
| case TYPE_PV88080_BA: | |
| chip->regmap_config = &pv88080_ba_regs; | |
| break; | |
| } | |
| regmap_config = chip->regmap_config; | |
| config.dev = chip->dev; | |
| config.regmap = chip->regmap; | |
| /* Registeration for BUCK1, 2, 3 */ | |
| for (i = 0; i < PV88080_MAX_REGULATORS-1; i++) { | |
| if (init_data) | |
| config.init_data = &init_data[i]; | |
| pv88080_regulator_info[i].limit_reg | |
| = regmap_config->buck_regmap[i].buck_limit_reg; | |
| pv88080_regulator_info[i].limit_mask | |
| = regmap_config->buck_regmap[i].buck_limit_mask; | |
| pv88080_regulator_info[i].mode_reg | |
| = regmap_config->buck_regmap[i].buck_mode_reg; | |
| pv88080_regulator_info[i].conf2 | |
| = regmap_config->buck_regmap[i].buck_vdac_range_reg; | |
| pv88080_regulator_info[i].conf5 | |
| = regmap_config->buck_regmap[i].buck_vrange_gain_reg; | |
| pv88080_regulator_info[i].desc.enable_reg | |
| = regmap_config->buck_regmap[i].buck_enable_reg; | |
| pv88080_regulator_info[i].desc.enable_mask | |
| = regmap_config->buck_regmap[i].buck_enable_mask; | |
| pv88080_regulator_info[i].desc.vsel_reg | |
| = regmap_config->buck_regmap[i].buck_vsel_reg; | |
| pv88080_regulator_info[i].desc.vsel_mask | |
| = regmap_config->buck_regmap[i].buck_vsel_mask; | |
| ret = regmap_read(chip->regmap, | |
| pv88080_regulator_info[i].conf2, &conf2); | |
| if (ret < 0) | |
| return ret; | |
| conf2 = ((conf2 >> PV88080_BUCK_VDAC_RANGE_SHIFT) & | |
| PV88080_BUCK_VDAC_RANGE_MASK); | |
| ret = regmap_read(chip->regmap, | |
| pv88080_regulator_info[i].conf5, &conf5); | |
| if (ret < 0) | |
| return ret; | |
| conf5 = ((conf5 >> PV88080_BUCK_VRANGE_GAIN_SHIFT) & | |
| PV88080_BUCK_VRANGE_GAIN_MASK); | |
| pv88080_regulator_info[i].desc.min_uV = | |
| pv88080_buck_vol[conf2].min_uV * (conf5+1); | |
| pv88080_regulator_info[i].desc.uV_step = | |
| pv88080_buck_vol[conf2].uV_step * (conf5+1); | |
| pv88080_regulator_info[i].desc.n_voltages = | |
| ((pv88080_buck_vol[conf2].max_uV * (conf5+1)) | |
| - (pv88080_regulator_info[i].desc.min_uV)) | |
| /(pv88080_regulator_info[i].desc.uV_step) + 1; | |
| config.driver_data = (void *)&pv88080_regulator_info[i]; | |
| chip->rdev[i] = devm_regulator_register(chip->dev, | |
| &pv88080_regulator_info[i].desc, &config); | |
| if (IS_ERR(chip->rdev[i])) { | |
| dev_err(chip->dev, | |
| "Failed to register PV88080 regulator\n"); | |
| return PTR_ERR(chip->rdev[i]); | |
| } | |
| } | |
| pv88080_regulator_info[PV88080_ID_HVBUCK].desc.enable_reg | |
| = regmap_config->hvbuck_enable_reg; | |
| pv88080_regulator_info[PV88080_ID_HVBUCK].desc.enable_mask | |
| = regmap_config->hvbuck_enable_mask; | |
| pv88080_regulator_info[PV88080_ID_HVBUCK].desc.vsel_reg | |
| = regmap_config->hvbuck_vsel_reg; | |
| pv88080_regulator_info[PV88080_ID_HVBUCK].desc.vsel_mask | |
| = regmap_config->hvbuck_vsel_mask; | |
| /* Registeration for HVBUCK */ | |
| if (init_data) | |
| config.init_data = &init_data[PV88080_ID_HVBUCK]; | |
| config.driver_data = (void *)&pv88080_regulator_info[PV88080_ID_HVBUCK]; | |
| chip->rdev[PV88080_ID_HVBUCK] = devm_regulator_register(chip->dev, | |
| &pv88080_regulator_info[PV88080_ID_HVBUCK].desc, &config); | |
| if (IS_ERR(chip->rdev[PV88080_ID_HVBUCK])) { | |
| dev_err(chip->dev, "Failed to register PV88080 regulator\n"); | |
| return PTR_ERR(chip->rdev[PV88080_ID_HVBUCK]); | |
| } | |
| return 0; | |
| } | |
| static const struct i2c_device_id pv88080_i2c_id[] = { | |
| { "pv88080", TYPE_PV88080_AA }, | |
| { "pv88080-aa", TYPE_PV88080_AA }, | |
| { "pv88080-ba", TYPE_PV88080_BA }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, pv88080_i2c_id); | |
| static struct i2c_driver pv88080_regulator_driver = { | |
| .driver = { | |
| .name = "pv88080", | |
| .of_match_table = of_match_ptr(pv88080_dt_ids), | |
| }, | |
| .probe = pv88080_i2c_probe, | |
| .id_table = pv88080_i2c_id, | |
| }; | |
| module_i2c_driver(pv88080_regulator_driver); | |
| MODULE_AUTHOR("James Ban <James.Ban.opensource@diasemi.com>"); | |
| MODULE_DESCRIPTION("Regulator device driver for Powerventure PV88080"); | |
| MODULE_LICENSE("GPL"); |