| /* | |
| * s5m8767.c | |
| * | |
| * Copyright (c) 2011 Samsung Electronics Co., Ltd | |
| * http://www.samsung.com | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| * | |
| */ | |
| #include <linux/err.h> | |
| #include <linux/of_gpio.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/regulator/driver.h> | |
| #include <linux/regulator/machine.h> | |
| #include <linux/mfd/samsung/core.h> | |
| #include <linux/mfd/samsung/s5m8767.h> | |
| #include <linux/regulator/of_regulator.h> | |
| #include <linux/regmap.h> | |
| #define S5M8767_OPMODE_NORMAL_MODE 0x1 | |
| struct s5m8767_info { | |
| struct device *dev; | |
| struct sec_pmic_dev *iodev; | |
| int num_regulators; | |
| struct sec_opmode_data *opmode; | |
| int ramp_delay; | |
| bool buck2_ramp; | |
| bool buck3_ramp; | |
| bool buck4_ramp; | |
| bool buck2_gpiodvs; | |
| bool buck3_gpiodvs; | |
| bool buck4_gpiodvs; | |
| u8 buck2_vol[8]; | |
| u8 buck3_vol[8]; | |
| u8 buck4_vol[8]; | |
| int buck_gpios[3]; | |
| int buck_ds[3]; | |
| int buck_gpioindex; | |
| }; | |
| struct sec_voltage_desc { | |
| int max; | |
| int min; | |
| int step; | |
| }; | |
| static const struct sec_voltage_desc buck_voltage_val1 = { | |
| .max = 2225000, | |
| .min = 650000, | |
| .step = 6250, | |
| }; | |
| static const struct sec_voltage_desc buck_voltage_val2 = { | |
| .max = 1600000, | |
| .min = 600000, | |
| .step = 6250, | |
| }; | |
| static const struct sec_voltage_desc buck_voltage_val3 = { | |
| .max = 3000000, | |
| .min = 750000, | |
| .step = 12500, | |
| }; | |
| static const struct sec_voltage_desc ldo_voltage_val1 = { | |
| .max = 3950000, | |
| .min = 800000, | |
| .step = 50000, | |
| }; | |
| static const struct sec_voltage_desc ldo_voltage_val2 = { | |
| .max = 2375000, | |
| .min = 800000, | |
| .step = 25000, | |
| }; | |
| static const struct sec_voltage_desc *reg_voltage_map[] = { | |
| [S5M8767_LDO1] = &ldo_voltage_val2, | |
| [S5M8767_LDO2] = &ldo_voltage_val2, | |
| [S5M8767_LDO3] = &ldo_voltage_val1, | |
| [S5M8767_LDO4] = &ldo_voltage_val1, | |
| [S5M8767_LDO5] = &ldo_voltage_val1, | |
| [S5M8767_LDO6] = &ldo_voltage_val2, | |
| [S5M8767_LDO7] = &ldo_voltage_val2, | |
| [S5M8767_LDO8] = &ldo_voltage_val2, | |
| [S5M8767_LDO9] = &ldo_voltage_val1, | |
| [S5M8767_LDO10] = &ldo_voltage_val1, | |
| [S5M8767_LDO11] = &ldo_voltage_val1, | |
| [S5M8767_LDO12] = &ldo_voltage_val1, | |
| [S5M8767_LDO13] = &ldo_voltage_val1, | |
| [S5M8767_LDO14] = &ldo_voltage_val1, | |
| [S5M8767_LDO15] = &ldo_voltage_val2, | |
| [S5M8767_LDO16] = &ldo_voltage_val1, | |
| [S5M8767_LDO17] = &ldo_voltage_val1, | |
| [S5M8767_LDO18] = &ldo_voltage_val1, | |
| [S5M8767_LDO19] = &ldo_voltage_val1, | |
| [S5M8767_LDO20] = &ldo_voltage_val1, | |
| [S5M8767_LDO21] = &ldo_voltage_val1, | |
| [S5M8767_LDO22] = &ldo_voltage_val1, | |
| [S5M8767_LDO23] = &ldo_voltage_val1, | |
| [S5M8767_LDO24] = &ldo_voltage_val1, | |
| [S5M8767_LDO25] = &ldo_voltage_val1, | |
| [S5M8767_LDO26] = &ldo_voltage_val1, | |
| [S5M8767_LDO27] = &ldo_voltage_val1, | |
| [S5M8767_LDO28] = &ldo_voltage_val1, | |
| [S5M8767_BUCK1] = &buck_voltage_val1, | |
| [S5M8767_BUCK2] = &buck_voltage_val2, | |
| [S5M8767_BUCK3] = &buck_voltage_val2, | |
| [S5M8767_BUCK4] = &buck_voltage_val2, | |
| [S5M8767_BUCK5] = &buck_voltage_val1, | |
| [S5M8767_BUCK6] = &buck_voltage_val1, | |
| [S5M8767_BUCK7] = &buck_voltage_val3, | |
| [S5M8767_BUCK8] = &buck_voltage_val3, | |
| [S5M8767_BUCK9] = &buck_voltage_val3, | |
| }; | |
| static unsigned int s5m8767_opmode_reg[][4] = { | |
| /* {OFF, ON, LOWPOWER, SUSPEND} */ | |
| /* LDO1 ... LDO28 */ | |
| {0x0, 0x3, 0x2, 0x1}, /* LDO1 */ | |
| {0x0, 0x3, 0x2, 0x1}, | |
| {0x0, 0x3, 0x2, 0x1}, | |
| {0x0, 0x0, 0x0, 0x0}, | |
| {0x0, 0x3, 0x2, 0x1}, /* LDO5 */ | |
| {0x0, 0x3, 0x2, 0x1}, | |
| {0x0, 0x3, 0x2, 0x1}, | |
| {0x0, 0x3, 0x2, 0x1}, | |
| {0x0, 0x3, 0x2, 0x1}, | |
| {0x0, 0x3, 0x2, 0x1}, /* LDO10 */ | |
| {0x0, 0x3, 0x2, 0x1}, | |
| {0x0, 0x3, 0x2, 0x1}, | |
| {0x0, 0x3, 0x2, 0x1}, | |
| {0x0, 0x3, 0x2, 0x1}, | |
| {0x0, 0x3, 0x2, 0x1}, /* LDO15 */ | |
| {0x0, 0x3, 0x2, 0x1}, | |
| {0x0, 0x3, 0x2, 0x1}, | |
| {0x0, 0x0, 0x0, 0x0}, | |
| {0x0, 0x3, 0x2, 0x1}, | |
| {0x0, 0x3, 0x2, 0x1}, /* LDO20 */ | |
| {0x0, 0x3, 0x2, 0x1}, | |
| {0x0, 0x3, 0x2, 0x1}, | |
| {0x0, 0x0, 0x0, 0x0}, | |
| {0x0, 0x3, 0x2, 0x1}, | |
| {0x0, 0x3, 0x2, 0x1}, /* LDO25 */ | |
| {0x0, 0x3, 0x2, 0x1}, | |
| {0x0, 0x3, 0x2, 0x1}, | |
| {0x0, 0x3, 0x2, 0x1}, /* LDO28 */ | |
| /* BUCK1 ... BUCK9 */ | |
| {0x0, 0x3, 0x1, 0x1}, /* BUCK1 */ | |
| {0x0, 0x3, 0x1, 0x1}, | |
| {0x0, 0x3, 0x1, 0x1}, | |
| {0x0, 0x3, 0x1, 0x1}, | |
| {0x0, 0x3, 0x2, 0x1}, /* BUCK5 */ | |
| {0x0, 0x3, 0x1, 0x1}, | |
| {0x0, 0x3, 0x1, 0x1}, | |
| {0x0, 0x3, 0x1, 0x1}, | |
| {0x0, 0x3, 0x1, 0x1}, /* BUCK9 */ | |
| }; | |
| static int s5m8767_get_register(struct s5m8767_info *s5m8767, int reg_id, | |
| int *reg, int *enable_ctrl) | |
| { | |
| int i; | |
| unsigned int mode; | |
| switch (reg_id) { | |
| case S5M8767_LDO1 ... S5M8767_LDO2: | |
| *reg = S5M8767_REG_LDO1CTRL + (reg_id - S5M8767_LDO1); | |
| break; | |
| case S5M8767_LDO3 ... S5M8767_LDO28: | |
| *reg = S5M8767_REG_LDO3CTRL + (reg_id - S5M8767_LDO3); | |
| break; | |
| case S5M8767_BUCK1: | |
| *reg = S5M8767_REG_BUCK1CTRL1; | |
| break; | |
| case S5M8767_BUCK2 ... S5M8767_BUCK4: | |
| *reg = S5M8767_REG_BUCK2CTRL + (reg_id - S5M8767_BUCK2) * 9; | |
| break; | |
| case S5M8767_BUCK5: | |
| *reg = S5M8767_REG_BUCK5CTRL1; | |
| break; | |
| case S5M8767_BUCK6 ... S5M8767_BUCK9: | |
| *reg = S5M8767_REG_BUCK6CTRL1 + (reg_id - S5M8767_BUCK6) * 2; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| for (i = 0; i < s5m8767->num_regulators; i++) { | |
| if (s5m8767->opmode[i].id == reg_id) { | |
| mode = s5m8767->opmode[i].mode; | |
| break; | |
| } | |
| } | |
| if (i >= s5m8767->num_regulators) | |
| return -EINVAL; | |
| *enable_ctrl = s5m8767_opmode_reg[reg_id][mode] << S5M8767_ENCTRL_SHIFT; | |
| return 0; | |
| } | |
| static int s5m8767_get_vsel_reg(int reg_id, struct s5m8767_info *s5m8767) | |
| { | |
| int reg; | |
| switch (reg_id) { | |
| case S5M8767_LDO1 ... S5M8767_LDO2: | |
| reg = S5M8767_REG_LDO1CTRL + (reg_id - S5M8767_LDO1); | |
| break; | |
| case S5M8767_LDO3 ... S5M8767_LDO28: | |
| reg = S5M8767_REG_LDO3CTRL + (reg_id - S5M8767_LDO3); | |
| break; | |
| case S5M8767_BUCK1: | |
| reg = S5M8767_REG_BUCK1CTRL2; | |
| break; | |
| case S5M8767_BUCK2: | |
| reg = S5M8767_REG_BUCK2DVS1; | |
| if (s5m8767->buck2_gpiodvs) | |
| reg += s5m8767->buck_gpioindex; | |
| break; | |
| case S5M8767_BUCK3: | |
| reg = S5M8767_REG_BUCK3DVS1; | |
| if (s5m8767->buck3_gpiodvs) | |
| reg += s5m8767->buck_gpioindex; | |
| break; | |
| case S5M8767_BUCK4: | |
| reg = S5M8767_REG_BUCK4DVS1; | |
| if (s5m8767->buck4_gpiodvs) | |
| reg += s5m8767->buck_gpioindex; | |
| break; | |
| case S5M8767_BUCK5: | |
| reg = S5M8767_REG_BUCK5CTRL2; | |
| break; | |
| case S5M8767_BUCK6 ... S5M8767_BUCK9: | |
| reg = S5M8767_REG_BUCK6CTRL2 + (reg_id - S5M8767_BUCK6) * 2; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return reg; | |
| } | |
| static int s5m8767_convert_voltage_to_sel(const struct sec_voltage_desc *desc, | |
| int min_vol) | |
| { | |
| int selector = 0; | |
| if (desc == NULL) | |
| return -EINVAL; | |
| if (min_vol > desc->max) | |
| return -EINVAL; | |
| if (min_vol < desc->min) | |
| min_vol = desc->min; | |
| selector = DIV_ROUND_UP(min_vol - desc->min, desc->step); | |
| if (desc->min + desc->step * selector > desc->max) | |
| return -EINVAL; | |
| return selector; | |
| } | |
| static inline int s5m8767_set_high(struct s5m8767_info *s5m8767) | |
| { | |
| int temp_index = s5m8767->buck_gpioindex; | |
| gpio_set_value(s5m8767->buck_gpios[0], (temp_index >> 2) & 0x1); | |
| gpio_set_value(s5m8767->buck_gpios[1], (temp_index >> 1) & 0x1); | |
| gpio_set_value(s5m8767->buck_gpios[2], temp_index & 0x1); | |
| return 0; | |
| } | |
| static inline int s5m8767_set_low(struct s5m8767_info *s5m8767) | |
| { | |
| int temp_index = s5m8767->buck_gpioindex; | |
| gpio_set_value(s5m8767->buck_gpios[2], temp_index & 0x1); | |
| gpio_set_value(s5m8767->buck_gpios[1], (temp_index >> 1) & 0x1); | |
| gpio_set_value(s5m8767->buck_gpios[0], (temp_index >> 2) & 0x1); | |
| return 0; | |
| } | |
| static int s5m8767_set_voltage_sel(struct regulator_dev *rdev, | |
| unsigned selector) | |
| { | |
| struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev); | |
| int reg_id = rdev_get_id(rdev); | |
| int old_index, index = 0; | |
| u8 *buck234_vol = NULL; | |
| switch (reg_id) { | |
| case S5M8767_LDO1 ... S5M8767_LDO28: | |
| break; | |
| case S5M8767_BUCK1 ... S5M8767_BUCK6: | |
| if (reg_id == S5M8767_BUCK2 && s5m8767->buck2_gpiodvs) | |
| buck234_vol = &s5m8767->buck2_vol[0]; | |
| else if (reg_id == S5M8767_BUCK3 && s5m8767->buck3_gpiodvs) | |
| buck234_vol = &s5m8767->buck3_vol[0]; | |
| else if (reg_id == S5M8767_BUCK4 && s5m8767->buck4_gpiodvs) | |
| buck234_vol = &s5m8767->buck4_vol[0]; | |
| break; | |
| case S5M8767_BUCK7 ... S5M8767_BUCK8: | |
| return -EINVAL; | |
| case S5M8767_BUCK9: | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| /* buck234_vol != NULL means to control buck234 voltage via DVS GPIO */ | |
| if (buck234_vol) { | |
| while (*buck234_vol != selector) { | |
| buck234_vol++; | |
| index++; | |
| } | |
| old_index = s5m8767->buck_gpioindex; | |
| s5m8767->buck_gpioindex = index; | |
| if (index > old_index) | |
| return s5m8767_set_high(s5m8767); | |
| else | |
| return s5m8767_set_low(s5m8767); | |
| } else { | |
| return regulator_set_voltage_sel_regmap(rdev, selector); | |
| } | |
| } | |
| static int s5m8767_set_voltage_time_sel(struct regulator_dev *rdev, | |
| unsigned int old_sel, | |
| unsigned int new_sel) | |
| { | |
| struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev); | |
| const struct sec_voltage_desc *desc; | |
| int reg_id = rdev_get_id(rdev); | |
| desc = reg_voltage_map[reg_id]; | |
| if ((old_sel < new_sel) && s5m8767->ramp_delay) | |
| return DIV_ROUND_UP(desc->step * (new_sel - old_sel), | |
| s5m8767->ramp_delay * 1000); | |
| return 0; | |
| } | |
| static struct regulator_ops s5m8767_ops = { | |
| .list_voltage = regulator_list_voltage_linear, | |
| .is_enabled = regulator_is_enabled_regmap, | |
| .enable = regulator_enable_regmap, | |
| .disable = regulator_disable_regmap, | |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, | |
| .set_voltage_sel = s5m8767_set_voltage_sel, | |
| .set_voltage_time_sel = s5m8767_set_voltage_time_sel, | |
| }; | |
| static struct regulator_ops s5m8767_buck78_ops = { | |
| .list_voltage = regulator_list_voltage_linear, | |
| .is_enabled = regulator_is_enabled_regmap, | |
| .enable = regulator_enable_regmap, | |
| .disable = regulator_disable_regmap, | |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, | |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, | |
| }; | |
| #define s5m8767_regulator_desc(_name) { \ | |
| .name = #_name, \ | |
| .id = S5M8767_##_name, \ | |
| .ops = &s5m8767_ops, \ | |
| .type = REGULATOR_VOLTAGE, \ | |
| .owner = THIS_MODULE, \ | |
| } | |
| #define s5m8767_regulator_buck78_desc(_name) { \ | |
| .name = #_name, \ | |
| .id = S5M8767_##_name, \ | |
| .ops = &s5m8767_buck78_ops, \ | |
| .type = REGULATOR_VOLTAGE, \ | |
| .owner = THIS_MODULE, \ | |
| } | |
| static struct regulator_desc regulators[] = { | |
| s5m8767_regulator_desc(LDO1), | |
| s5m8767_regulator_desc(LDO2), | |
| s5m8767_regulator_desc(LDO3), | |
| s5m8767_regulator_desc(LDO4), | |
| s5m8767_regulator_desc(LDO5), | |
| s5m8767_regulator_desc(LDO6), | |
| s5m8767_regulator_desc(LDO7), | |
| s5m8767_regulator_desc(LDO8), | |
| s5m8767_regulator_desc(LDO9), | |
| s5m8767_regulator_desc(LDO10), | |
| s5m8767_regulator_desc(LDO11), | |
| s5m8767_regulator_desc(LDO12), | |
| s5m8767_regulator_desc(LDO13), | |
| s5m8767_regulator_desc(LDO14), | |
| s5m8767_regulator_desc(LDO15), | |
| s5m8767_regulator_desc(LDO16), | |
| s5m8767_regulator_desc(LDO17), | |
| s5m8767_regulator_desc(LDO18), | |
| s5m8767_regulator_desc(LDO19), | |
| s5m8767_regulator_desc(LDO20), | |
| s5m8767_regulator_desc(LDO21), | |
| s5m8767_regulator_desc(LDO22), | |
| s5m8767_regulator_desc(LDO23), | |
| s5m8767_regulator_desc(LDO24), | |
| s5m8767_regulator_desc(LDO25), | |
| s5m8767_regulator_desc(LDO26), | |
| s5m8767_regulator_desc(LDO27), | |
| s5m8767_regulator_desc(LDO28), | |
| s5m8767_regulator_desc(BUCK1), | |
| s5m8767_regulator_desc(BUCK2), | |
| s5m8767_regulator_desc(BUCK3), | |
| s5m8767_regulator_desc(BUCK4), | |
| s5m8767_regulator_desc(BUCK5), | |
| s5m8767_regulator_desc(BUCK6), | |
| s5m8767_regulator_buck78_desc(BUCK7), | |
| s5m8767_regulator_buck78_desc(BUCK8), | |
| s5m8767_regulator_desc(BUCK9), | |
| }; | |
| /* | |
| * Enable GPIO control over BUCK9 in regulator_config for that regulator. | |
| */ | |
| static void s5m8767_regulator_config_ext_control(struct s5m8767_info *s5m8767, | |
| struct sec_regulator_data *rdata, | |
| struct regulator_config *config) | |
| { | |
| int i, mode = 0; | |
| if (rdata->id != S5M8767_BUCK9) | |
| return; | |
| /* Check if opmode for regulator matches S5M8767_ENCTRL_USE_GPIO */ | |
| for (i = 0; i < s5m8767->num_regulators; i++) { | |
| const struct sec_opmode_data *opmode = &s5m8767->opmode[i]; | |
| if (opmode->id == rdata->id) { | |
| mode = s5m8767_opmode_reg[rdata->id][opmode->mode]; | |
| break; | |
| } | |
| } | |
| if (mode != S5M8767_ENCTRL_USE_GPIO) { | |
| dev_warn(s5m8767->dev, | |
| "ext-control for %s: mismatched op_mode (%x), ignoring\n", | |
| rdata->reg_node->name, mode); | |
| return; | |
| } | |
| if (!gpio_is_valid(rdata->ext_control_gpio)) { | |
| dev_warn(s5m8767->dev, | |
| "ext-control for %s: GPIO not valid, ignoring\n", | |
| rdata->reg_node->name); | |
| return; | |
| } | |
| config->ena_gpio = rdata->ext_control_gpio; | |
| config->ena_gpio_flags = GPIOF_OUT_INIT_HIGH; | |
| } | |
| /* | |
| * Turn on GPIO control over BUCK9. | |
| */ | |
| static int s5m8767_enable_ext_control(struct s5m8767_info *s5m8767, | |
| struct regulator_dev *rdev) | |
| { | |
| int id = rdev_get_id(rdev); | |
| int ret, reg, enable_ctrl; | |
| if (id != S5M8767_BUCK9) | |
| return -EINVAL; | |
| ret = s5m8767_get_register(s5m8767, id, ®, &enable_ctrl); | |
| if (ret) | |
| return ret; | |
| return regmap_update_bits(s5m8767->iodev->regmap_pmic, | |
| reg, S5M8767_ENCTRL_MASK, | |
| S5M8767_ENCTRL_USE_GPIO << S5M8767_ENCTRL_SHIFT); | |
| } | |
| #ifdef CONFIG_OF | |
| static int s5m8767_pmic_dt_parse_dvs_gpio(struct sec_pmic_dev *iodev, | |
| struct sec_platform_data *pdata, | |
| struct device_node *pmic_np) | |
| { | |
| int i, gpio; | |
| for (i = 0; i < 3; i++) { | |
| gpio = of_get_named_gpio(pmic_np, | |
| "s5m8767,pmic-buck-dvs-gpios", i); | |
| if (!gpio_is_valid(gpio)) { | |
| dev_err(iodev->dev, "invalid gpio[%d]: %d\n", i, gpio); | |
| return -EINVAL; | |
| } | |
| pdata->buck_gpios[i] = gpio; | |
| } | |
| return 0; | |
| } | |
| static int s5m8767_pmic_dt_parse_ds_gpio(struct sec_pmic_dev *iodev, | |
| struct sec_platform_data *pdata, | |
| struct device_node *pmic_np) | |
| { | |
| int i, gpio; | |
| for (i = 0; i < 3; i++) { | |
| gpio = of_get_named_gpio(pmic_np, | |
| "s5m8767,pmic-buck-ds-gpios", i); | |
| if (!gpio_is_valid(gpio)) { | |
| dev_err(iodev->dev, "invalid gpio[%d]: %d\n", i, gpio); | |
| return -EINVAL; | |
| } | |
| pdata->buck_ds[i] = gpio; | |
| } | |
| return 0; | |
| } | |
| static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev, | |
| struct sec_platform_data *pdata) | |
| { | |
| struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent); | |
| struct device_node *pmic_np, *regulators_np, *reg_np; | |
| struct sec_regulator_data *rdata; | |
| struct sec_opmode_data *rmode; | |
| unsigned int i, dvs_voltage_nr = 8, ret; | |
| pmic_np = iodev->dev->of_node; | |
| if (!pmic_np) { | |
| dev_err(iodev->dev, "could not find pmic sub-node\n"); | |
| return -ENODEV; | |
| } | |
| regulators_np = of_get_child_by_name(pmic_np, "regulators"); | |
| if (!regulators_np) { | |
| dev_err(iodev->dev, "could not find regulators sub-node\n"); | |
| return -EINVAL; | |
| } | |
| /* count the number of regulators to be supported in pmic */ | |
| pdata->num_regulators = of_get_child_count(regulators_np); | |
| rdata = devm_kzalloc(&pdev->dev, sizeof(*rdata) * | |
| pdata->num_regulators, GFP_KERNEL); | |
| if (!rdata) | |
| return -ENOMEM; | |
| rmode = devm_kzalloc(&pdev->dev, sizeof(*rmode) * | |
| pdata->num_regulators, GFP_KERNEL); | |
| if (!rmode) | |
| return -ENOMEM; | |
| pdata->regulators = rdata; | |
| pdata->opmode = rmode; | |
| for_each_child_of_node(regulators_np, reg_np) { | |
| for (i = 0; i < ARRAY_SIZE(regulators); i++) | |
| if (!of_node_cmp(reg_np->name, regulators[i].name)) | |
| break; | |
| if (i == ARRAY_SIZE(regulators)) { | |
| dev_warn(iodev->dev, | |
| "don't know how to configure regulator %s\n", | |
| reg_np->name); | |
| continue; | |
| } | |
| rdata->ext_control_gpio = of_get_named_gpio(reg_np, | |
| "s5m8767,pmic-ext-control-gpios", 0); | |
| rdata->id = i; | |
| rdata->initdata = of_get_regulator_init_data( | |
| &pdev->dev, reg_np, | |
| ®ulators[i]); | |
| rdata->reg_node = reg_np; | |
| rdata++; | |
| rmode->id = i; | |
| if (of_property_read_u32(reg_np, "op_mode", | |
| &rmode->mode)) { | |
| dev_warn(iodev->dev, | |
| "no op_mode property property at %s\n", | |
| reg_np->full_name); | |
| rmode->mode = S5M8767_OPMODE_NORMAL_MODE; | |
| } | |
| rmode++; | |
| } | |
| of_node_put(regulators_np); | |
| if (of_get_property(pmic_np, "s5m8767,pmic-buck2-uses-gpio-dvs", NULL)) { | |
| pdata->buck2_gpiodvs = true; | |
| if (of_property_read_u32_array(pmic_np, | |
| "s5m8767,pmic-buck2-dvs-voltage", | |
| pdata->buck2_voltage, dvs_voltage_nr)) { | |
| dev_err(iodev->dev, "buck2 voltages not specified\n"); | |
| return -EINVAL; | |
| } | |
| } | |
| if (of_get_property(pmic_np, "s5m8767,pmic-buck3-uses-gpio-dvs", NULL)) { | |
| pdata->buck3_gpiodvs = true; | |
| if (of_property_read_u32_array(pmic_np, | |
| "s5m8767,pmic-buck3-dvs-voltage", | |
| pdata->buck3_voltage, dvs_voltage_nr)) { | |
| dev_err(iodev->dev, "buck3 voltages not specified\n"); | |
| return -EINVAL; | |
| } | |
| } | |
| if (of_get_property(pmic_np, "s5m8767,pmic-buck4-uses-gpio-dvs", NULL)) { | |
| pdata->buck4_gpiodvs = true; | |
| if (of_property_read_u32_array(pmic_np, | |
| "s5m8767,pmic-buck4-dvs-voltage", | |
| pdata->buck4_voltage, dvs_voltage_nr)) { | |
| dev_err(iodev->dev, "buck4 voltages not specified\n"); | |
| return -EINVAL; | |
| } | |
| } | |
| if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs || | |
| pdata->buck4_gpiodvs) { | |
| ret = s5m8767_pmic_dt_parse_dvs_gpio(iodev, pdata, pmic_np); | |
| if (ret) | |
| return -EINVAL; | |
| if (of_property_read_u32(pmic_np, | |
| "s5m8767,pmic-buck-default-dvs-idx", | |
| &pdata->buck_default_idx)) { | |
| pdata->buck_default_idx = 0; | |
| } else { | |
| if (pdata->buck_default_idx >= 8) { | |
| pdata->buck_default_idx = 0; | |
| dev_info(iodev->dev, | |
| "invalid value for default dvs index, use 0\n"); | |
| } | |
| } | |
| } | |
| ret = s5m8767_pmic_dt_parse_ds_gpio(iodev, pdata, pmic_np); | |
| if (ret) | |
| return -EINVAL; | |
| if (of_get_property(pmic_np, "s5m8767,pmic-buck2-ramp-enable", NULL)) | |
| pdata->buck2_ramp_enable = true; | |
| if (of_get_property(pmic_np, "s5m8767,pmic-buck3-ramp-enable", NULL)) | |
| pdata->buck3_ramp_enable = true; | |
| if (of_get_property(pmic_np, "s5m8767,pmic-buck4-ramp-enable", NULL)) | |
| pdata->buck4_ramp_enable = true; | |
| if (pdata->buck2_ramp_enable || pdata->buck3_ramp_enable | |
| || pdata->buck4_ramp_enable) { | |
| if (of_property_read_u32(pmic_np, "s5m8767,pmic-buck-ramp-delay", | |
| &pdata->buck_ramp_delay)) | |
| pdata->buck_ramp_delay = 0; | |
| } | |
| return 0; | |
| } | |
| #else | |
| static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev, | |
| struct sec_platform_data *pdata) | |
| { | |
| return 0; | |
| } | |
| #endif /* CONFIG_OF */ | |
| static int s5m8767_pmic_probe(struct platform_device *pdev) | |
| { | |
| struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent); | |
| struct sec_platform_data *pdata = iodev->pdata; | |
| struct regulator_config config = { }; | |
| struct s5m8767_info *s5m8767; | |
| int i, ret, buck_init; | |
| if (!pdata) { | |
| dev_err(pdev->dev.parent, "Platform data not supplied\n"); | |
| return -ENODEV; | |
| } | |
| if (iodev->dev->of_node) { | |
| ret = s5m8767_pmic_dt_parse_pdata(pdev, pdata); | |
| if (ret) | |
| return ret; | |
| } | |
| if (pdata->buck2_gpiodvs) { | |
| if (pdata->buck3_gpiodvs || pdata->buck4_gpiodvs) { | |
| dev_err(&pdev->dev, "S5M8767 GPIO DVS NOT VALID\n"); | |
| return -EINVAL; | |
| } | |
| } | |
| if (pdata->buck3_gpiodvs) { | |
| if (pdata->buck2_gpiodvs || pdata->buck4_gpiodvs) { | |
| dev_err(&pdev->dev, "S5M8767 GPIO DVS NOT VALID\n"); | |
| return -EINVAL; | |
| } | |
| } | |
| if (pdata->buck4_gpiodvs) { | |
| if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs) { | |
| dev_err(&pdev->dev, "S5M8767 GPIO DVS NOT VALID\n"); | |
| return -EINVAL; | |
| } | |
| } | |
| s5m8767 = devm_kzalloc(&pdev->dev, sizeof(struct s5m8767_info), | |
| GFP_KERNEL); | |
| if (!s5m8767) | |
| return -ENOMEM; | |
| s5m8767->dev = &pdev->dev; | |
| s5m8767->iodev = iodev; | |
| s5m8767->num_regulators = pdata->num_regulators; | |
| platform_set_drvdata(pdev, s5m8767); | |
| s5m8767->buck_gpioindex = pdata->buck_default_idx; | |
| s5m8767->buck2_gpiodvs = pdata->buck2_gpiodvs; | |
| s5m8767->buck3_gpiodvs = pdata->buck3_gpiodvs; | |
| s5m8767->buck4_gpiodvs = pdata->buck4_gpiodvs; | |
| s5m8767->buck_gpios[0] = pdata->buck_gpios[0]; | |
| s5m8767->buck_gpios[1] = pdata->buck_gpios[1]; | |
| s5m8767->buck_gpios[2] = pdata->buck_gpios[2]; | |
| s5m8767->buck_ds[0] = pdata->buck_ds[0]; | |
| s5m8767->buck_ds[1] = pdata->buck_ds[1]; | |
| s5m8767->buck_ds[2] = pdata->buck_ds[2]; | |
| s5m8767->ramp_delay = pdata->buck_ramp_delay; | |
| s5m8767->buck2_ramp = pdata->buck2_ramp_enable; | |
| s5m8767->buck3_ramp = pdata->buck3_ramp_enable; | |
| s5m8767->buck4_ramp = pdata->buck4_ramp_enable; | |
| s5m8767->opmode = pdata->opmode; | |
| buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2, | |
| pdata->buck2_init); | |
| regmap_write(s5m8767->iodev->regmap_pmic, S5M8767_REG_BUCK2DVS2, | |
| buck_init); | |
| buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2, | |
| pdata->buck3_init); | |
| regmap_write(s5m8767->iodev->regmap_pmic, S5M8767_REG_BUCK3DVS2, | |
| buck_init); | |
| buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2, | |
| pdata->buck4_init); | |
| regmap_write(s5m8767->iodev->regmap_pmic, S5M8767_REG_BUCK4DVS2, | |
| buck_init); | |
| for (i = 0; i < 8; i++) { | |
| if (s5m8767->buck2_gpiodvs) { | |
| s5m8767->buck2_vol[i] = | |
| s5m8767_convert_voltage_to_sel( | |
| &buck_voltage_val2, | |
| pdata->buck2_voltage[i]); | |
| } | |
| if (s5m8767->buck3_gpiodvs) { | |
| s5m8767->buck3_vol[i] = | |
| s5m8767_convert_voltage_to_sel( | |
| &buck_voltage_val2, | |
| pdata->buck3_voltage[i]); | |
| } | |
| if (s5m8767->buck4_gpiodvs) { | |
| s5m8767->buck4_vol[i] = | |
| s5m8767_convert_voltage_to_sel( | |
| &buck_voltage_val2, | |
| pdata->buck4_voltage[i]); | |
| } | |
| } | |
| if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs || | |
| pdata->buck4_gpiodvs) { | |
| if (!gpio_is_valid(pdata->buck_gpios[0]) || | |
| !gpio_is_valid(pdata->buck_gpios[1]) || | |
| !gpio_is_valid(pdata->buck_gpios[2])) { | |
| dev_err(&pdev->dev, "GPIO NOT VALID\n"); | |
| return -EINVAL; | |
| } | |
| ret = devm_gpio_request(&pdev->dev, pdata->buck_gpios[0], | |
| "S5M8767 SET1"); | |
| if (ret) | |
| return ret; | |
| ret = devm_gpio_request(&pdev->dev, pdata->buck_gpios[1], | |
| "S5M8767 SET2"); | |
| if (ret) | |
| return ret; | |
| ret = devm_gpio_request(&pdev->dev, pdata->buck_gpios[2], | |
| "S5M8767 SET3"); | |
| if (ret) | |
| return ret; | |
| /* SET1 GPIO */ | |
| gpio_direction_output(pdata->buck_gpios[0], | |
| (s5m8767->buck_gpioindex >> 2) & 0x1); | |
| /* SET2 GPIO */ | |
| gpio_direction_output(pdata->buck_gpios[1], | |
| (s5m8767->buck_gpioindex >> 1) & 0x1); | |
| /* SET3 GPIO */ | |
| gpio_direction_output(pdata->buck_gpios[2], | |
| (s5m8767->buck_gpioindex >> 0) & 0x1); | |
| } | |
| ret = devm_gpio_request(&pdev->dev, pdata->buck_ds[0], "S5M8767 DS2"); | |
| if (ret) | |
| return ret; | |
| ret = devm_gpio_request(&pdev->dev, pdata->buck_ds[1], "S5M8767 DS3"); | |
| if (ret) | |
| return ret; | |
| ret = devm_gpio_request(&pdev->dev, pdata->buck_ds[2], "S5M8767 DS4"); | |
| if (ret) | |
| return ret; | |
| /* DS2 GPIO */ | |
| gpio_direction_output(pdata->buck_ds[0], 0x0); | |
| /* DS3 GPIO */ | |
| gpio_direction_output(pdata->buck_ds[1], 0x0); | |
| /* DS4 GPIO */ | |
| gpio_direction_output(pdata->buck_ds[2], 0x0); | |
| if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs || | |
| pdata->buck4_gpiodvs) { | |
| regmap_update_bits(s5m8767->iodev->regmap_pmic, | |
| S5M8767_REG_BUCK2CTRL, 1 << 1, | |
| (pdata->buck2_gpiodvs) ? (1 << 1) : (0 << 1)); | |
| regmap_update_bits(s5m8767->iodev->regmap_pmic, | |
| S5M8767_REG_BUCK3CTRL, 1 << 1, | |
| (pdata->buck3_gpiodvs) ? (1 << 1) : (0 << 1)); | |
| regmap_update_bits(s5m8767->iodev->regmap_pmic, | |
| S5M8767_REG_BUCK4CTRL, 1 << 1, | |
| (pdata->buck4_gpiodvs) ? (1 << 1) : (0 << 1)); | |
| } | |
| /* Initialize GPIO DVS registers */ | |
| for (i = 0; i < 8; i++) { | |
| if (s5m8767->buck2_gpiodvs) { | |
| regmap_write(s5m8767->iodev->regmap_pmic, | |
| S5M8767_REG_BUCK2DVS1 + i, | |
| s5m8767->buck2_vol[i]); | |
| } | |
| if (s5m8767->buck3_gpiodvs) { | |
| regmap_write(s5m8767->iodev->regmap_pmic, | |
| S5M8767_REG_BUCK3DVS1 + i, | |
| s5m8767->buck3_vol[i]); | |
| } | |
| if (s5m8767->buck4_gpiodvs) { | |
| regmap_write(s5m8767->iodev->regmap_pmic, | |
| S5M8767_REG_BUCK4DVS1 + i, | |
| s5m8767->buck4_vol[i]); | |
| } | |
| } | |
| if (s5m8767->buck2_ramp) | |
| regmap_update_bits(s5m8767->iodev->regmap_pmic, | |
| S5M8767_REG_DVSRAMP, 0x08, 0x08); | |
| if (s5m8767->buck3_ramp) | |
| regmap_update_bits(s5m8767->iodev->regmap_pmic, | |
| S5M8767_REG_DVSRAMP, 0x04, 0x04); | |
| if (s5m8767->buck4_ramp) | |
| regmap_update_bits(s5m8767->iodev->regmap_pmic, | |
| S5M8767_REG_DVSRAMP, 0x02, 0x02); | |
| if (s5m8767->buck2_ramp || s5m8767->buck3_ramp | |
| || s5m8767->buck4_ramp) { | |
| unsigned int val; | |
| switch (s5m8767->ramp_delay) { | |
| case 5: | |
| val = S5M8767_DVS_BUCK_RAMP_5; | |
| break; | |
| case 10: | |
| val = S5M8767_DVS_BUCK_RAMP_10; | |
| break; | |
| case 25: | |
| val = S5M8767_DVS_BUCK_RAMP_25; | |
| break; | |
| case 50: | |
| val = S5M8767_DVS_BUCK_RAMP_50; | |
| break; | |
| case 100: | |
| val = S5M8767_DVS_BUCK_RAMP_100; | |
| break; | |
| default: | |
| val = S5M8767_DVS_BUCK_RAMP_10; | |
| } | |
| regmap_update_bits(s5m8767->iodev->regmap_pmic, | |
| S5M8767_REG_DVSRAMP, | |
| S5M8767_DVS_BUCK_RAMP_MASK, | |
| val << S5M8767_DVS_BUCK_RAMP_SHIFT); | |
| } | |
| for (i = 0; i < pdata->num_regulators; i++) { | |
| const struct sec_voltage_desc *desc; | |
| int id = pdata->regulators[i].id; | |
| int enable_reg, enable_val; | |
| struct regulator_dev *rdev; | |
| desc = reg_voltage_map[id]; | |
| if (desc) { | |
| regulators[id].n_voltages = | |
| (desc->max - desc->min) / desc->step + 1; | |
| regulators[id].min_uV = desc->min; | |
| regulators[id].uV_step = desc->step; | |
| regulators[id].vsel_reg = | |
| s5m8767_get_vsel_reg(id, s5m8767); | |
| if (id < S5M8767_BUCK1) | |
| regulators[id].vsel_mask = 0x3f; | |
| else | |
| regulators[id].vsel_mask = 0xff; | |
| ret = s5m8767_get_register(s5m8767, id, &enable_reg, | |
| &enable_val); | |
| if (ret) { | |
| dev_err(s5m8767->dev, "error reading registers\n"); | |
| return ret; | |
| } | |
| regulators[id].enable_reg = enable_reg; | |
| regulators[id].enable_mask = S5M8767_ENCTRL_MASK; | |
| regulators[id].enable_val = enable_val; | |
| } | |
| config.dev = s5m8767->dev; | |
| config.init_data = pdata->regulators[i].initdata; | |
| config.driver_data = s5m8767; | |
| config.regmap = iodev->regmap_pmic; | |
| config.of_node = pdata->regulators[i].reg_node; | |
| config.ena_gpio = -EINVAL; | |
| config.ena_gpio_flags = 0; | |
| config.ena_gpio_initialized = true; | |
| if (gpio_is_valid(pdata->regulators[i].ext_control_gpio)) | |
| s5m8767_regulator_config_ext_control(s5m8767, | |
| &pdata->regulators[i], &config); | |
| rdev = devm_regulator_register(&pdev->dev, ®ulators[id], | |
| &config); | |
| if (IS_ERR(rdev)) { | |
| ret = PTR_ERR(rdev); | |
| dev_err(s5m8767->dev, "regulator init failed for %d\n", | |
| id); | |
| return ret; | |
| } | |
| if (gpio_is_valid(pdata->regulators[i].ext_control_gpio)) { | |
| ret = s5m8767_enable_ext_control(s5m8767, rdev); | |
| if (ret < 0) { | |
| dev_err(s5m8767->dev, | |
| "failed to enable gpio control over %s: %d\n", | |
| rdev->desc->name, ret); | |
| return ret; | |
| } | |
| } | |
| } | |
| return 0; | |
| } | |
| static const struct platform_device_id s5m8767_pmic_id[] = { | |
| { "s5m8767-pmic", 0}, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(platform, s5m8767_pmic_id); | |
| static struct platform_driver s5m8767_pmic_driver = { | |
| .driver = { | |
| .name = "s5m8767-pmic", | |
| }, | |
| .probe = s5m8767_pmic_probe, | |
| .id_table = s5m8767_pmic_id, | |
| }; | |
| static int __init s5m8767_pmic_init(void) | |
| { | |
| return platform_driver_register(&s5m8767_pmic_driver); | |
| } | |
| subsys_initcall(s5m8767_pmic_init); | |
| static void __exit s5m8767_pmic_exit(void) | |
| { | |
| platform_driver_unregister(&s5m8767_pmic_driver); | |
| } | |
| module_exit(s5m8767_pmic_exit); | |
| /* Module information */ | |
| MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>"); | |
| MODULE_DESCRIPTION("SAMSUNG S5M8767 Regulator Driver"); | |
| MODULE_LICENSE("GPL"); |