| /* | |
| * Copyright (C) ST-Ericsson AB 2012 | |
| * Author: Sjur Brændeland <sjur.brandeland@stericsson.com> | |
| * License terms: GNU General Public License (GPL), version 2 | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/remoteproc.h> | |
| #include <linux/ste_modem_shm.h> | |
| #include "remoteproc_internal.h" | |
| #define SPROC_FW_SIZE (50 * 4096) | |
| #define SPROC_MAX_TOC_ENTRIES 32 | |
| #define SPROC_MAX_NOTIFY_ID 14 | |
| #define SPROC_RESOURCE_NAME "rsc-table" | |
| #define SPROC_MODEM_NAME "ste-modem" | |
| #define SPROC_MODEM_FIRMWARE SPROC_MODEM_NAME "-fw.bin" | |
| #define sproc_dbg(sproc, fmt, ...) \ | |
| dev_dbg(&sproc->mdev->pdev.dev, fmt, ##__VA_ARGS__) | |
| #define sproc_err(sproc, fmt, ...) \ | |
| dev_err(&sproc->mdev->pdev.dev, fmt, ##__VA_ARGS__) | |
| /* STE-modem control structure */ | |
| struct sproc { | |
| struct rproc *rproc; | |
| struct ste_modem_device *mdev; | |
| int error; | |
| void *fw_addr; | |
| size_t fw_size; | |
| dma_addr_t fw_dma_addr; | |
| }; | |
| /* STE-Modem firmware entry */ | |
| struct ste_toc_entry { | |
| __le32 start; | |
| __le32 size; | |
| __le32 flags; | |
| __le32 entry_point; | |
| __le32 load_addr; | |
| char name[12]; | |
| }; | |
| /* | |
| * The Table Of Content is located at the start of the firmware image and | |
| * at offset zero in the shared memory region. The resource table typically | |
| * contains the initial boot image (boot strap) and other information elements | |
| * such as remoteproc resource table. Each entry is identified by a unique | |
| * name. | |
| */ | |
| struct ste_toc { | |
| struct ste_toc_entry table[SPROC_MAX_TOC_ENTRIES]; | |
| }; | |
| /* Loads the firmware to shared memory. */ | |
| static int sproc_load_segments(struct rproc *rproc, const struct firmware *fw) | |
| { | |
| struct sproc *sproc = rproc->priv; | |
| memcpy(sproc->fw_addr, fw->data, fw->size); | |
| return 0; | |
| } | |
| /* Find the entry for resource table in the Table of Content */ | |
| static const struct ste_toc_entry *sproc_find_rsc_entry(const void *data) | |
| { | |
| int i; | |
| const struct ste_toc *toc = data; | |
| /* Search the table for the resource table */ | |
| for (i = 0; i < SPROC_MAX_TOC_ENTRIES && | |
| toc->table[i].start != 0xffffffff; i++) { | |
| if (!strncmp(toc->table[i].name, SPROC_RESOURCE_NAME, | |
| sizeof(toc->table[i].name))) | |
| return &toc->table[i]; | |
| } | |
| return NULL; | |
| } | |
| /* Find the resource table inside the remote processor's firmware. */ | |
| static struct resource_table * | |
| sproc_find_rsc_table(struct rproc *rproc, const struct firmware *fw, | |
| int *tablesz) | |
| { | |
| struct sproc *sproc = rproc->priv; | |
| struct resource_table *table; | |
| const struct ste_toc_entry *entry; | |
| if (!fw) | |
| return NULL; | |
| entry = sproc_find_rsc_entry(fw->data); | |
| if (!entry) { | |
| sproc_err(sproc, "resource table not found in fw\n"); | |
| return NULL; | |
| } | |
| table = (void *)(fw->data + entry->start); | |
| /* sanity check size and offset of resource table */ | |
| if (entry->start > SPROC_FW_SIZE || | |
| entry->size > SPROC_FW_SIZE || | |
| fw->size > SPROC_FW_SIZE || | |
| entry->start + entry->size > fw->size || | |
| sizeof(struct resource_table) > entry->size) { | |
| sproc_err(sproc, "bad size of fw or resource table\n"); | |
| return NULL; | |
| } | |
| /* we don't support any version beyond the first */ | |
| if (table->ver != 1) { | |
| sproc_err(sproc, "unsupported fw ver: %d\n", table->ver); | |
| return NULL; | |
| } | |
| /* make sure reserved bytes are zeroes */ | |
| if (table->reserved[0] || table->reserved[1]) { | |
| sproc_err(sproc, "non zero reserved bytes\n"); | |
| return NULL; | |
| } | |
| /* make sure the offsets array isn't truncated */ | |
| if (table->num > SPROC_MAX_TOC_ENTRIES || | |
| table->num * sizeof(table->offset[0]) + | |
| sizeof(struct resource_table) > entry->size) { | |
| sproc_err(sproc, "resource table incomplete\n"); | |
| return NULL; | |
| } | |
| /* If the fw size has grown, release the previous fw allocation */ | |
| if (SPROC_FW_SIZE < fw->size) { | |
| sproc_err(sproc, "Insufficient space for fw (%d < %zd)\n", | |
| SPROC_FW_SIZE, fw->size); | |
| return NULL; | |
| } | |
| sproc->fw_size = fw->size; | |
| *tablesz = entry->size; | |
| return table; | |
| } | |
| /* Find the resource table inside the remote processor's firmware. */ | |
| static struct resource_table * | |
| sproc_find_loaded_rsc_table(struct rproc *rproc, const struct firmware *fw) | |
| { | |
| struct sproc *sproc = rproc->priv; | |
| const struct ste_toc_entry *entry; | |
| if (!fw || !sproc->fw_addr) | |
| return NULL; | |
| entry = sproc_find_rsc_entry(sproc->fw_addr); | |
| if (!entry) { | |
| sproc_err(sproc, "resource table not found in fw\n"); | |
| return NULL; | |
| } | |
| return sproc->fw_addr + entry->start; | |
| } | |
| /* STE modem firmware handler operations */ | |
| static const struct rproc_fw_ops sproc_fw_ops = { | |
| .load = sproc_load_segments, | |
| .find_rsc_table = sproc_find_rsc_table, | |
| .find_loaded_rsc_table = sproc_find_loaded_rsc_table, | |
| }; | |
| /* Kick the modem with specified notification id */ | |
| static void sproc_kick(struct rproc *rproc, int vqid) | |
| { | |
| struct sproc *sproc = rproc->priv; | |
| sproc_dbg(sproc, "kick vqid:%d\n", vqid); | |
| /* | |
| * We need different notification IDs for RX and TX so add | |
| * an offset on TX notification IDs. | |
| */ | |
| sproc->mdev->ops.kick(sproc->mdev, vqid + SPROC_MAX_NOTIFY_ID); | |
| } | |
| /* Received a kick from a modem, kick the virtqueue */ | |
| static void sproc_kick_callback(struct ste_modem_device *mdev, int vqid) | |
| { | |
| struct sproc *sproc = mdev->drv_data; | |
| if (rproc_vq_interrupt(sproc->rproc, vqid) == IRQ_NONE) | |
| sproc_dbg(sproc, "no message was found in vqid %d\n", vqid); | |
| } | |
| static struct ste_modem_dev_cb sproc_dev_cb = { | |
| .kick = sproc_kick_callback, | |
| }; | |
| /* Start the STE modem */ | |
| static int sproc_start(struct rproc *rproc) | |
| { | |
| struct sproc *sproc = rproc->priv; | |
| int i, err; | |
| sproc_dbg(sproc, "start ste-modem\n"); | |
| /* Sanity test the max_notifyid */ | |
| if (rproc->max_notifyid > SPROC_MAX_NOTIFY_ID) { | |
| sproc_err(sproc, "Notification IDs too high:%d\n", | |
| rproc->max_notifyid); | |
| return -EINVAL; | |
| } | |
| /* Subscribe to notifications */ | |
| for (i = 0; i <= rproc->max_notifyid; i++) { | |
| err = sproc->mdev->ops.kick_subscribe(sproc->mdev, i); | |
| if (err) { | |
| sproc_err(sproc, | |
| "subscription of kicks failed:%d\n", err); | |
| return err; | |
| } | |
| } | |
| /* Request modem start-up*/ | |
| return sproc->mdev->ops.power(sproc->mdev, true); | |
| } | |
| /* Stop the STE modem */ | |
| static int sproc_stop(struct rproc *rproc) | |
| { | |
| struct sproc *sproc = rproc->priv; | |
| sproc_dbg(sproc, "stop ste-modem\n"); | |
| return sproc->mdev->ops.power(sproc->mdev, false); | |
| } | |
| static struct rproc_ops sproc_ops = { | |
| .start = sproc_start, | |
| .stop = sproc_stop, | |
| .kick = sproc_kick, | |
| }; | |
| /* STE modem device is unregistered */ | |
| static int sproc_drv_remove(struct platform_device *pdev) | |
| { | |
| struct ste_modem_device *mdev = | |
| container_of(pdev, struct ste_modem_device, pdev); | |
| struct sproc *sproc = mdev->drv_data; | |
| sproc_dbg(sproc, "remove ste-modem\n"); | |
| /* Reset device callback functions */ | |
| sproc->mdev->ops.setup(sproc->mdev, NULL); | |
| /* Unregister as remoteproc device */ | |
| rproc_del(sproc->rproc); | |
| dma_free_coherent(sproc->rproc->dev.parent, SPROC_FW_SIZE, | |
| sproc->fw_addr, sproc->fw_dma_addr); | |
| rproc_free(sproc->rproc); | |
| mdev->drv_data = NULL; | |
| return 0; | |
| } | |
| /* Handle probe of a modem device */ | |
| static int sproc_probe(struct platform_device *pdev) | |
| { | |
| struct ste_modem_device *mdev = | |
| container_of(pdev, struct ste_modem_device, pdev); | |
| struct sproc *sproc; | |
| struct rproc *rproc; | |
| int err; | |
| dev_dbg(&mdev->pdev.dev, "probe ste-modem\n"); | |
| if (!mdev->ops.setup || !mdev->ops.kick || !mdev->ops.kick_subscribe || | |
| !mdev->ops.power) { | |
| dev_err(&mdev->pdev.dev, "invalid mdev ops\n"); | |
| return -EINVAL; | |
| } | |
| rproc = rproc_alloc(&mdev->pdev.dev, mdev->pdev.name, &sproc_ops, | |
| SPROC_MODEM_FIRMWARE, sizeof(*sproc)); | |
| if (!rproc) | |
| return -ENOMEM; | |
| sproc = rproc->priv; | |
| sproc->mdev = mdev; | |
| sproc->rproc = rproc; | |
| rproc->has_iommu = false; | |
| mdev->drv_data = sproc; | |
| /* Provide callback functions to modem device */ | |
| sproc->mdev->ops.setup(sproc->mdev, &sproc_dev_cb); | |
| /* Set the STE-modem specific firmware handler */ | |
| rproc->fw_ops = &sproc_fw_ops; | |
| /* | |
| * STE-modem requires the firmware to be located | |
| * at the start of the shared memory region. So we need to | |
| * reserve space for firmware at the start. | |
| */ | |
| sproc->fw_addr = dma_alloc_coherent(rproc->dev.parent, SPROC_FW_SIZE, | |
| &sproc->fw_dma_addr, | |
| GFP_KERNEL); | |
| if (!sproc->fw_addr) { | |
| sproc_err(sproc, "Cannot allocate memory for fw\n"); | |
| err = -ENOMEM; | |
| goto free_rproc; | |
| } | |
| /* Register as a remoteproc device */ | |
| err = rproc_add(rproc); | |
| if (err) | |
| goto free_mem; | |
| return 0; | |
| free_mem: | |
| dma_free_coherent(rproc->dev.parent, SPROC_FW_SIZE, | |
| sproc->fw_addr, sproc->fw_dma_addr); | |
| free_rproc: | |
| /* Reset device data upon error */ | |
| mdev->drv_data = NULL; | |
| rproc_free(rproc); | |
| return err; | |
| } | |
| static struct platform_driver sproc_driver = { | |
| .driver = { | |
| .name = SPROC_MODEM_NAME, | |
| }, | |
| .probe = sproc_probe, | |
| .remove = sproc_drv_remove, | |
| }; | |
| module_platform_driver(sproc_driver); | |
| MODULE_LICENSE("GPL v2"); | |
| MODULE_DESCRIPTION("STE Modem driver using the Remote Processor Framework"); |