Google Git Google Git
Sign in
gem5/arm/linux/917e007a4150d26a0a/./drivers/rtc/rtc-ds1307.c
blob: 4e31036ee2596dec93accd26f627c5b95591ae9f [file]
/*
* rtc-ds1307.c - RTC driver for some mostly-compatible I2C chips.
*
* Copyright (C) 2005 James Chapman (ds1337 core)
* Copyright (C) 2006 David Brownell
* Copyright (C) 2009 Matthias Fuchs (rx8025 support)
* Copyright (C) 2012 Bertrand Achard (nvram access fixes)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/bcd.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/rtc/ds1307.h>
#include <linux/rtc.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/clk-provider.h>
/*
* We can't determine type by probing, but if we expect pre-Linux code
* to have set the chip up as a clock (turning on the oscillator and
* setting the date and time), Linux can ignore the non-clock features.
* That's a natural job for a factory or repair bench.
*/
enum ds_type {
ds_1307,
ds_1337,
ds_1338,
ds_1339,
ds_1340,
ds_1388,
ds_3231,
m41t00,
mcp794xx,
rx_8025,
last_ds_type /* always last */
/* rs5c372 too? different address... */
};
/* RTC registers don't differ much, except for the century flag */
#define DS1307_REG_SECS 0x00 /* 00-59 */
# define DS1307_BIT_CH 0x80
# define DS1340_BIT_nEOSC 0x80
# define MCP794XX_BIT_ST 0x80
#define DS1307_REG_MIN 0x01 /* 00-59 */
#define DS1307_REG_HOUR 0x02 /* 00-23, or 1-12{am,pm} */
# define DS1307_BIT_12HR 0x40 /* in REG_HOUR */
# define DS1307_BIT_PM 0x20 /* in REG_HOUR */
# define DS1340_BIT_CENTURY_EN 0x80 /* in REG_HOUR */
# define DS1340_BIT_CENTURY 0x40 /* in REG_HOUR */
#define DS1307_REG_WDAY 0x03 /* 01-07 */
# define MCP794XX_BIT_VBATEN 0x08
#define DS1307_REG_MDAY 0x04 /* 01-31 */
#define DS1307_REG_MONTH 0x05 /* 01-12 */
# define DS1337_BIT_CENTURY 0x80 /* in REG_MONTH */
#define DS1307_REG_YEAR 0x06 /* 00-99 */
/*
* Other registers (control, status, alarms, trickle charge, NVRAM, etc)
* start at 7, and they differ a LOT. Only control and status matter for
* basic RTC date and time functionality; be careful using them.
*/
#define DS1307_REG_CONTROL 0x07 /* or ds1338 */
# define DS1307_BIT_OUT 0x80
# define DS1338_BIT_OSF 0x20
# define DS1307_BIT_SQWE 0x10
# define DS1307_BIT_RS1 0x02
# define DS1307_BIT_RS0 0x01
#define DS1337_REG_CONTROL 0x0e
# define DS1337_BIT_nEOSC 0x80
# define DS1339_BIT_BBSQI 0x20
# define DS3231_BIT_BBSQW 0x40 /* same as BBSQI */
# define DS1337_BIT_RS2 0x10
# define DS1337_BIT_RS1 0x08
# define DS1337_BIT_INTCN 0x04
# define DS1337_BIT_A2IE 0x02
# define DS1337_BIT_A1IE 0x01
#define DS1340_REG_CONTROL 0x07
# define DS1340_BIT_OUT 0x80
# define DS1340_BIT_FT 0x40
# define DS1340_BIT_CALIB_SIGN 0x20
# define DS1340_M_CALIBRATION 0x1f
#define DS1340_REG_FLAG 0x09
# define DS1340_BIT_OSF 0x80
#define DS1337_REG_STATUS 0x0f
# define DS1337_BIT_OSF 0x80
# define DS3231_BIT_EN32KHZ 0x08
# define DS1337_BIT_A2I 0x02
# define DS1337_BIT_A1I 0x01
#define DS1339_REG_ALARM1_SECS 0x07
#define DS13XX_TRICKLE_CHARGER_MAGIC 0xa0
#define RX8025_REG_CTRL1 0x0e
# define RX8025_BIT_2412 0x20
#define RX8025_REG_CTRL2 0x0f
# define RX8025_BIT_PON 0x10
# define RX8025_BIT_VDET 0x40
# define RX8025_BIT_XST 0x20
struct ds1307 {
u8 offset; /* register's offset */
u8 regs[11];
u16 nvram_offset;
struct bin_attribute *nvram;
enum ds_type type;
unsigned long flags;
#define HAS_NVRAM 0 /* bit 0 == sysfs file active */
#define HAS_ALARM 1 /* bit 1 == irq claimed */
struct i2c_client *client;
struct rtc_device *rtc;
s32 (*read_block_data)(const struct i2c_client *client, u8 command,
u8 length, u8 *values);
s32 (*write_block_data)(const struct i2c_client *client, u8 command,
u8 length, const u8 *values);
#ifdef CONFIG_COMMON_CLK
struct clk_hw clks[2];
#endif
};
struct chip_desc {
unsigned alarm:1;
u16 nvram_offset;
u16 nvram_size;
u16 trickle_charger_reg;
u8 trickle_charger_setup;
u8 (*do_trickle_setup)(struct i2c_client *, uint32_t, bool);
};
static u8 do_trickle_setup_ds1339(struct i2c_client *,
uint32_t ohms, bool diode);
static struct chip_desc chips[last_ds_type] = {
[ds_1307] = {
.nvram_offset = 8,
.nvram_size = 56,
},
[ds_1337] = {
.alarm = 1,
},
[ds_1338] = {
.nvram_offset = 8,
.nvram_size = 56,
},
[ds_1339] = {
.alarm = 1,
.trickle_charger_reg = 0x10,
.do_trickle_setup = &do_trickle_setup_ds1339,
},
[ds_1340] = {
.trickle_charger_reg = 0x08,
},
[ds_1388] = {
.trickle_charger_reg = 0x0a,
},
[ds_3231] = {
.alarm = 1,
},
[mcp794xx] = {
.alarm = 1,
/* this is battery backed SRAM */
.nvram_offset = 0x20,
.nvram_size = 0x40,
},
};
static const struct i2c_device_id ds1307_id[] = {
{ "ds1307", ds_1307 },
{ "ds1337", ds_1337 },
{ "ds1338", ds_1338 },
{ "ds1339", ds_1339 },
{ "ds1388", ds_1388 },
{ "ds1340", ds_1340 },
{ "ds3231", ds_3231 },
{ "m41t00", m41t00 },
{ "mcp7940x", mcp794xx },
{ "mcp7941x", mcp794xx },
{ "pt7c4338", ds_1307 },
{ "rx8025", rx_8025 },
{ "isl12057", ds_1337 },
{ }
};
MODULE_DEVICE_TABLE(i2c, ds1307_id);
/*----------------------------------------------------------------------*/
#define BLOCK_DATA_MAX_TRIES 10
static s32 ds1307_read_block_data_once(const struct i2c_client *client,
u8 command, u8 length, u8 *values)
{
s32 i, data;
for (i = 0; i < length; i++) {
data = i2c_smbus_read_byte_data(client, command + i);
if (data < 0)
return data;
values[i] = data;
}
return i;
}
static s32 ds1307_read_block_data(const struct i2c_client *client, u8 command,
u8 length, u8 *values)
{
u8 oldvalues[255];
s32 ret;
int tries = 0;
dev_dbg(&client->dev, "ds1307_read_block_data (length=%d)\n", length);
ret = ds1307_read_block_data_once(client, command, length, values);
if (ret < 0)
return ret;
do {
if (++tries > BLOCK_DATA_MAX_TRIES) {
dev_err(&client->dev,
"ds1307_read_block_data failed\n");
return -EIO;
}
memcpy(oldvalues, values, length);
ret = ds1307_read_block_data_once(client, command, length,
values);
if (ret < 0)
return ret;
} while (memcmp(oldvalues, values, length));
return length;
}
static s32 ds1307_write_block_data(const struct i2c_client *client, u8 command,
u8 length, const u8 *values)
{
u8 currvalues[255];
int tries = 0;
dev_dbg(&client->dev, "ds1307_write_block_data (length=%d)\n", length);
do {
s32 i, ret;
if (++tries > BLOCK_DATA_MAX_TRIES) {
dev_err(&client->dev,
"ds1307_write_block_data failed\n");
return -EIO;
}
for (i = 0; i < length; i++) {
ret = i2c_smbus_write_byte_data(client, command + i,
values[i]);
if (ret < 0)
return ret;
}
ret = ds1307_read_block_data_once(client, command, length,
currvalues);
if (ret < 0)
return ret;
} while (memcmp(currvalues, values, length));
return length;
}
/*----------------------------------------------------------------------*/
/* These RTC devices are not designed to be connected to a SMbus adapter.
SMbus limits block operations length to 32 bytes, whereas it's not
limited on I2C buses. As a result, accesses may exceed 32 bytes;
in that case, split them into smaller blocks */
static s32 ds1307_native_smbus_write_block_data(const struct i2c_client *client,
u8 command, u8 length, const u8 *values)
{
u8 suboffset = 0;
if (length <= I2C_SMBUS_BLOCK_MAX) {
s32 retval = i2c_smbus_write_i2c_block_data(client,
command, length, values);
if (retval < 0)
return retval;
return length;
}
while (suboffset < length) {
s32 retval = i2c_smbus_write_i2c_block_data(client,
command + suboffset,
min(I2C_SMBUS_BLOCK_MAX, length - suboffset),
values + suboffset);
if (retval < 0)
return retval;
suboffset += I2C_SMBUS_BLOCK_MAX;
}
return length;
}
static s32 ds1307_native_smbus_read_block_data(const struct i2c_client *client,
u8 command, u8 length, u8 *values)
{
u8 suboffset = 0;
if (length <= I2C_SMBUS_BLOCK_MAX)
return i2c_smbus_read_i2c_block_data(client,
command, length, values);
while (suboffset < length) {
s32 retval = i2c_smbus_read_i2c_block_data(client,
command + suboffset,
min(I2C_SMBUS_BLOCK_MAX, length - suboffset),
values + suboffset);
if (retval < 0)
return retval;
suboffset += I2C_SMBUS_BLOCK_MAX;
}
return length;
}
/*----------------------------------------------------------------------*/
/*
* The ds1337 and ds1339 both have two alarms, but we only use the first
* one (with a "seconds" field). For ds1337 we expect nINTA is our alarm
* signal; ds1339 chips have only one alarm signal.
*/
static irqreturn_t ds1307_irq(int irq, void *dev_id)
{
struct i2c_client *client = dev_id;
struct ds1307 *ds1307 = i2c_get_clientdata(client);
struct mutex *lock = &ds1307->rtc->ops_lock;
int stat, control;
mutex_lock(lock);
stat = i2c_smbus_read_byte_data(client, DS1337_REG_STATUS);
if (stat < 0)
goto out;
if (stat & DS1337_BIT_A1I) {
stat &= ~DS1337_BIT_A1I;
i2c_smbus_write_byte_data(client, DS1337_REG_STATUS, stat);
control = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL);
if (control < 0)
goto out;
control &= ~DS1337_BIT_A1IE;
i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, control);
rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
}
out:
mutex_unlock(lock);
return IRQ_HANDLED;
}
/*----------------------------------------------------------------------*/
static int ds1307_get_time(struct device *dev, struct rtc_time *t)
{
struct ds1307 *ds1307 = dev_get_drvdata(dev);
int tmp;
/* read the RTC date and time registers all at once */
tmp = ds1307->read_block_data(ds1307->client,
ds1307->offset, 7, ds1307->regs);
if (tmp != 7) {
dev_err(dev, "%s error %d\n", "read", tmp);
return -EIO;
}
dev_dbg(dev, "%s: %7ph\n", "read", ds1307->regs);
t->tm_sec = bcd2bin(ds1307->regs[DS1307_REG_SECS] & 0x7f);
t->tm_min = bcd2bin(ds1307->regs[DS1307_REG_MIN] & 0x7f);
tmp = ds1307->regs[DS1307_REG_HOUR] & 0x3f;
t->tm_hour = bcd2bin(tmp);
t->tm_wday = bcd2bin(ds1307->regs[DS1307_REG_WDAY] & 0x07) - 1;
t->tm_mday = bcd2bin(ds1307->regs[DS1307_REG_MDAY] & 0x3f);
tmp = ds1307->regs[DS1307_REG_MONTH] & 0x1f;
t->tm_mon = bcd2bin(tmp) - 1;
t->tm_year = bcd2bin(ds1307->regs[DS1307_REG_YEAR]) + 100;
#ifdef CONFIG_RTC_DRV_DS1307_CENTURY
switch (ds1307->type) {
case ds_1337:
case ds_1339:
case ds_3231:
if (ds1307->regs[DS1307_REG_MONTH] & DS1337_BIT_CENTURY)
t->tm_year += 100;
break;
case ds_1340:
if (ds1307->regs[DS1307_REG_HOUR] & DS1340_BIT_CENTURY)
t->tm_year += 100;
break;
default:
break;
}
#endif
dev_dbg(dev, "%s secs=%d, mins=%d, "
"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
"read", t->tm_sec, t->tm_min,
t->tm_hour, t->tm_mday,
t->tm_mon, t->tm_year, t->tm_wday);
/* initial clock setting can be undefined */
return rtc_valid_tm(t);
}
static int ds1307_set_time(struct device *dev, struct rtc_time *t)
{
struct ds1307 *ds1307 = dev_get_drvdata(dev);
int result;
int tmp;
u8 *buf = ds1307->regs;
dev_dbg(dev, "%s secs=%d, mins=%d, "
"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
"write", t->tm_sec, t->tm_min,
t->tm_hour, t->tm_mday,
t->tm_mon, t->tm_year, t->tm_wday);
#ifdef CONFIG_RTC_DRV_DS1307_CENTURY
if (t->tm_year < 100)
return -EINVAL;
switch (ds1307->type) {
case ds_1337:
case ds_1339:
case ds_3231:
case ds_1340:
if (t->tm_year > 299)
return -EINVAL;
default:
if (t->tm_year > 199)
return -EINVAL;
break;
}
#else
if (t->tm_year < 100 || t->tm_year > 199)
return -EINVAL;
#endif
buf[DS1307_REG_SECS] = bin2bcd(t->tm_sec);
buf[DS1307_REG_MIN] = bin2bcd(t->tm_min);
buf[DS1307_REG_HOUR] = bin2bcd(t->tm_hour);
buf[DS1307_REG_WDAY] = bin2bcd(t->tm_wday + 1);
buf[DS1307_REG_MDAY] = bin2bcd(t->tm_mday);
buf[DS1307_REG_MONTH] = bin2bcd(t->tm_mon + 1);
/* assume 20YY not 19YY */
tmp = t->tm_year - 100;
buf[DS1307_REG_YEAR] = bin2bcd(tmp);
switch (ds1307->type) {
case ds_1337:
case ds_1339:
case ds_3231:
if (t->tm_year > 199)
buf[DS1307_REG_MONTH] |= DS1337_BIT_CENTURY;
break;
case ds_1340:
buf[DS1307_REG_HOUR] |= DS1340_BIT_CENTURY_EN;
if (t->tm_year > 199)
buf[DS1307_REG_HOUR] |= DS1340_BIT_CENTURY;
break;
case mcp794xx:
/*
* these bits were cleared when preparing the date/time
* values and need to be set again before writing the
* buffer out to the device.
*/
buf[DS1307_REG_SECS] |= MCP794XX_BIT_ST;
buf[DS1307_REG_WDAY] |= MCP794XX_BIT_VBATEN;
break;
default:
break;
}
dev_dbg(dev, "%s: %7ph\n", "write", buf);
result = ds1307->write_block_data(ds1307->client,
ds1307->offset, 7, buf);
if (result < 0) {
dev_err(dev, "%s error %d\n", "write", result);
return result;
}
return 0;
}
static int ds1337_read_alarm(struct device *dev, struct rtc_wkalrm *t)
{
struct i2c_client *client = to_i2c_client(dev);
struct ds1307 *ds1307 = i2c_get_clientdata(client);
int ret;
if (!test_bit(HAS_ALARM, &ds1307->flags))
return -EINVAL;
/* read all ALARM1, ALARM2, and status registers at once */
ret = ds1307->read_block_data(client,
DS1339_REG_ALARM1_SECS, 9, ds1307->regs);
if (ret != 9) {
dev_err(dev, "%s error %d\n", "alarm read", ret);
return -EIO;
}
dev_dbg(dev, "%s: %4ph, %3ph, %2ph\n", "alarm read",
&ds1307->regs[0], &ds1307->regs[4], &ds1307->regs[7]);
/*
* report alarm time (ALARM1); assume 24 hour and day-of-month modes,
* and that all four fields are checked matches
*/
t->time.tm_sec = bcd2bin(ds1307->regs[0] & 0x7f);
t->time.tm_min = bcd2bin(ds1307->regs[1] & 0x7f);
t->time.tm_hour = bcd2bin(ds1307->regs[2] & 0x3f);
t->time.tm_mday = bcd2bin(ds1307->regs[3] & 0x3f);
/* ... and status */
t->enabled = !!(ds1307->regs[7] & DS1337_BIT_A1IE);
t->pending = !!(ds1307->regs[8] & DS1337_BIT_A1I);
dev_dbg(dev, "%s secs=%d, mins=%d, "
"hours=%d, mday=%d, enabled=%d, pending=%d\n",
"alarm read", t->time.tm_sec, t->time.tm_min,
t->time.tm_hour, t->time.tm_mday,
t->enabled, t->pending);
return 0;
}
static int ds1337_set_alarm(struct device *dev, struct rtc_wkalrm *t)
{
struct i2c_client *client = to_i2c_client(dev);
struct ds1307 *ds1307 = i2c_get_clientdata(client);
unsigned char *buf = ds1307->regs;
u8 control, status;
int ret;
if (!test_bit(HAS_ALARM, &ds1307->flags))
return -EINVAL;
dev_dbg(dev, "%s secs=%d, mins=%d, "
"hours=%d, mday=%d, enabled=%d, pending=%d\n",
"alarm set", t->time.tm_sec, t->time.tm_min,
t->time.tm_hour, t->time.tm_mday,
t->enabled, t->pending);
/* read current status of both alarms and the chip */
ret = ds1307->read_block_data(client,
DS1339_REG_ALARM1_SECS, 9, buf);
if (ret != 9) {
dev_err(dev, "%s error %d\n", "alarm write", ret);
return -EIO;
}
control = ds1307->regs[7];
status = ds1307->regs[8];
dev_dbg(dev, "%s: %4ph, %3ph, %02x %02x\n", "alarm set (old status)",
&ds1307->regs[0], &ds1307->regs[4], control, status);
/* set ALARM1, using 24 hour and day-of-month modes */
buf[0] = bin2bcd(t->time.tm_sec);
buf[1] = bin2bcd(t->time.tm_min);
buf[2] = bin2bcd(t->time.tm_hour);
buf[3] = bin2bcd(t->time.tm_mday);
/* set ALARM2 to non-garbage */
buf[4] = 0;
buf[5] = 0;
buf[6] = 0;
/* disable alarms */
buf[7] = control & ~(DS1337_BIT_A1IE | DS1337_BIT_A2IE);
buf[8] = status & ~(DS1337_BIT_A1I | DS1337_BIT_A2I);
ret = ds1307->write_block_data(client,
DS1339_REG_ALARM1_SECS, 9, buf);
if (ret < 0) {
dev_err(dev, "can't set alarm time\n");
return ret;
}
/* optionally enable ALARM1 */
if (t->enabled) {
dev_dbg(dev, "alarm IRQ armed\n");
buf[7] |= DS1337_BIT_A1IE; /* only ALARM1 is used */
i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, buf[7]);
}
return 0;
}
static int ds1307_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
struct i2c_client *client = to_i2c_client(dev);
struct ds1307 *ds1307 = i2c_get_clientdata(client);
int ret;
if (!test_bit(HAS_ALARM, &ds1307->flags))
return -ENOTTY;
ret = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL);
if (ret < 0)
return ret;
if (enabled)
ret |= DS1337_BIT_A1IE;
else
ret &= ~DS1337_BIT_A1IE;
ret = i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, ret);
if (ret < 0)
return ret;
return 0;
}
static const struct rtc_class_ops ds13xx_rtc_ops = {
.read_time = ds1307_get_time,
.set_time = ds1307_set_time,
.read_alarm = ds1337_read_alarm,
.set_alarm = ds1337_set_alarm,
.alarm_irq_enable = ds1307_alarm_irq_enable,
};
/*----------------------------------------------------------------------*/
/*
* Alarm support for mcp794xx devices.
*/
#define MCP794XX_REG_WEEKDAY 0x3
#define MCP794XX_REG_WEEKDAY_WDAY_MASK 0x7
#define MCP794XX_REG_CONTROL 0x07
# define MCP794XX_BIT_ALM0_EN 0x10
# define MCP794XX_BIT_ALM1_EN 0x20
#define MCP794XX_REG_ALARM0_BASE 0x0a
#define MCP794XX_REG_ALARM0_CTRL 0x0d
#define MCP794XX_REG_ALARM1_BASE 0x11
#define MCP794XX_REG_ALARM1_CTRL 0x14
# define MCP794XX_BIT_ALMX_IF (1 << 3)
# define MCP794XX_BIT_ALMX_C0 (1 << 4)
# define MCP794XX_BIT_ALMX_C1 (1 << 5)
# define MCP794XX_BIT_ALMX_C2 (1 << 6)
# define MCP794XX_BIT_ALMX_POL (1 << 7)
# define MCP794XX_MSK_ALMX_MATCH (MCP794XX_BIT_ALMX_C0 | \
MCP794XX_BIT_ALMX_C1 | \
MCP794XX_BIT_ALMX_C2)
static irqreturn_t mcp794xx_irq(int irq, void *dev_id)
{
struct i2c_client *client = dev_id;
struct ds1307 *ds1307 = i2c_get_clientdata(client);
struct mutex *lock = &ds1307->rtc->ops_lock;
int reg, ret;
mutex_lock(lock);
/* Check and clear alarm 0 interrupt flag. */
reg = i2c_smbus_read_byte_data(client, MCP794XX_REG_ALARM0_CTRL);
if (reg < 0)
goto out;
if (!(reg & MCP794XX_BIT_ALMX_IF))
goto out;
reg &= ~MCP794XX_BIT_ALMX_IF;
ret = i2c_smbus_write_byte_data(client, MCP794XX_REG_ALARM0_CTRL, reg);
if (ret < 0)
goto out;
/* Disable alarm 0. */
reg = i2c_smbus_read_byte_data(client, MCP794XX_REG_CONTROL);
if (reg < 0)
goto out;
reg &= ~MCP794XX_BIT_ALM0_EN;
ret = i2c_smbus_write_byte_data(client, MCP794XX_REG_CONTROL, reg);
if (ret < 0)
goto out;
rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
out:
mutex_unlock(lock);
return IRQ_HANDLED;
}
static int mcp794xx_read_alarm(struct device *dev, struct rtc_wkalrm *t)
{
struct i2c_client *client = to_i2c_client(dev);
struct ds1307 *ds1307 = i2c_get_clientdata(client);
u8 *regs = ds1307->regs;
int ret;
if (!test_bit(HAS_ALARM, &ds1307->flags))
return -EINVAL;
/* Read control and alarm 0 registers. */
ret = ds1307->read_block_data(client, MCP794XX_REG_CONTROL, 10, regs);
if (ret < 0)
return ret;
t->enabled = !!(regs[0] & MCP794XX_BIT_ALM0_EN);
/* Report alarm 0 time assuming 24-hour and day-of-month modes. */
t->time.tm_sec = bcd2bin(ds1307->regs[3] & 0x7f);
t->time.tm_min = bcd2bin(ds1307->regs[4] & 0x7f);
t->time.tm_hour = bcd2bin(ds1307->regs[5] & 0x3f);
t->time.tm_wday = bcd2bin(ds1307->regs[6] & 0x7) - 1;
t->time.tm_mday = bcd2bin(ds1307->regs[7] & 0x3f);
t->time.tm_mon = bcd2bin(ds1307->regs[8] & 0x1f) - 1;
t->time.tm_year = -1;
t->time.tm_yday = -1;
t->time.tm_isdst = -1;
dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d "
"enabled=%d polarity=%d irq=%d match=%d\n", __func__,
t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
t->time.tm_wday, t->time.tm_mday, t->time.tm_mon, t->enabled,
!!(ds1307->regs[6] & MCP794XX_BIT_ALMX_POL),
!!(ds1307->regs[6] & MCP794XX_BIT_ALMX_IF),
(ds1307->regs[6] & MCP794XX_MSK_ALMX_MATCH) >> 4);
return 0;
}
static int mcp794xx_set_alarm(struct device *dev, struct rtc_wkalrm *t)
{
struct i2c_client *client = to_i2c_client(dev);
struct ds1307 *ds1307 = i2c_get_clientdata(client);
unsigned char *regs = ds1307->regs;
int ret;
if (!test_bit(HAS_ALARM, &ds1307->flags))
return -EINVAL;
dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d "
"enabled=%d pending=%d\n", __func__,
t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
t->time.tm_wday, t->time.tm_mday, t->time.tm_mon,
t->enabled, t->pending);
/* Read control and alarm 0 registers. */
ret = ds1307->read_block_data(client, MCP794XX_REG_CONTROL, 10, regs);
if (ret < 0)
return ret;
/* Set alarm 0, using 24-hour and day-of-month modes. */
regs[3] = bin2bcd(t->time.tm_sec);
regs[4] = bin2bcd(t->time.tm_min);
regs[5] = bin2bcd(t->time.tm_hour);
regs[6] = bin2bcd(t->time.tm_wday + 1);
regs[7] = bin2bcd(t->time.tm_mday);
regs[8] = bin2bcd(t->time.tm_mon + 1);
/* Clear the alarm 0 interrupt flag. */
regs[6] &= ~MCP794XX_BIT_ALMX_IF;
/* Set alarm match: second, minute, hour, day, date, month. */
regs[6] |= MCP794XX_MSK_ALMX_MATCH;
/* Disable interrupt. We will not enable until completely programmed */
regs[0] &= ~MCP794XX_BIT_ALM0_EN;
ret = ds1307->write_block_data(client, MCP794XX_REG_CONTROL, 10, regs);
if (ret < 0)
return ret;
if (!t->enabled)
return 0;
regs[0] |= MCP794XX_BIT_ALM0_EN;
return i2c_smbus_write_byte_data(client, MCP794XX_REG_CONTROL, regs[0]);
}
static int mcp794xx_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
struct i2c_client *client = to_i2c_client(dev);
struct ds1307 *ds1307 = i2c_get_clientdata(client);
int reg;
if (!test_bit(HAS_ALARM, &ds1307->flags))
return -EINVAL;
reg = i2c_smbus_read_byte_data(client, MCP794XX_REG_CONTROL);
if (reg < 0)
return reg;
if (enabled)
reg |= MCP794XX_BIT_ALM0_EN;
else
reg &= ~MCP794XX_BIT_ALM0_EN;
return i2c_smbus_write_byte_data(client, MCP794XX_REG_CONTROL, reg);
}
static const struct rtc_class_ops mcp794xx_rtc_ops = {
.read_time = ds1307_get_time,
.set_time = ds1307_set_time,
.read_alarm = mcp794xx_read_alarm,
.set_alarm = mcp794xx_set_alarm,
.alarm_irq_enable = mcp794xx_alarm_irq_enable,
};
/*----------------------------------------------------------------------*/
static ssize_t
ds1307_nvram_read(struct file *filp, struct kobject *kobj,
struct bin_attribute *attr,
char *buf, loff_t off, size_t count)
{
struct i2c_client *client;
struct ds1307 *ds1307;
int result;
client = kobj_to_i2c_client(kobj);
ds1307 = i2c_get_clientdata(client);
result = ds1307->read_block_data(client, ds1307->nvram_offset + off,
count, buf);
if (result < 0)
dev_err(&client->dev, "%s error %d\n", "nvram read", result);
return result;
}
static ssize_t
ds1307_nvram_write(struct file *filp, struct kobject *kobj,
struct bin_attribute *attr,
char *buf, loff_t off, size_t count)
{
struct i2c_client *client;
struct ds1307 *ds1307;
int result;
client = kobj_to_i2c_client(kobj);
ds1307 = i2c_get_clientdata(client);
result = ds1307->write_block_data(client, ds1307->nvram_offset + off,
count, buf);
if (result < 0) {
dev_err(&client->dev, "%s error %d\n", "nvram write", result);
return result;
}
return count;
}
/*----------------------------------------------------------------------*/
static u8 do_trickle_setup_ds1339(struct i2c_client *client,
uint32_t ohms, bool diode)
{
u8 setup = (diode) ? DS1307_TRICKLE_CHARGER_DIODE :
DS1307_TRICKLE_CHARGER_NO_DIODE;
switch (ohms) {
case 250:
setup |= DS1307_TRICKLE_CHARGER_250_OHM;
break;
case 2000:
setup |= DS1307_TRICKLE_CHARGER_2K_OHM;
break;
case 4000:
setup |= DS1307_TRICKLE_CHARGER_4K_OHM;
break;
default:
dev_warn(&client->dev,
"Unsupported ohm value %u in dt\n", ohms);
return 0;
}
return setup;
}
static void ds1307_trickle_of_init(struct i2c_client *client,
struct chip_desc *chip)
{
uint32_t ohms = 0;
bool diode = true;
if (!chip->do_trickle_setup)
goto out;
if (of_property_read_u32(client->dev.of_node, "trickle-resistor-ohms" , &ohms))
goto out;
if (of_property_read_bool(client->dev.of_node, "trickle-diode-disable"))
diode = false;
chip->trickle_charger_setup = chip->do_trickle_setup(client,
ohms, diode);
out:
return;
}
/*----------------------------------------------------------------------*/
#ifdef CONFIG_RTC_DRV_DS1307_HWMON
/*
* Temperature sensor support for ds3231 devices.
*/
#define DS3231_REG_TEMPERATURE 0x11
/*
* A user-initiated temperature conversion is not started by this function,
* so the temperature is updated once every 64 seconds.
*/
static int ds3231_hwmon_read_temp(struct device *dev, s32 *mC)
{
struct ds1307 *ds1307 = dev_get_drvdata(dev);
u8 temp_buf[2];
s16 temp;
int ret;
ret = ds1307->read_block_data(ds1307->client, DS3231_REG_TEMPERATURE,
sizeof(temp_buf), temp_buf);
if (ret < 0)
return ret;
if (ret != sizeof(temp_buf))
return -EIO;
/*
* Temperature is represented as a 10-bit code with a resolution of
* 0.25 degree celsius and encoded in two's complement format.
*/
temp = (temp_buf[0] << 8) | temp_buf[1];
temp >>= 6;
*mC = temp * 250;
return 0;
}
static ssize_t ds3231_hwmon_show_temp(struct device *dev,
struct device_attribute *attr, char *buf)
{
int ret;
s32 temp;
ret = ds3231_hwmon_read_temp(dev, &temp);
if (ret)
return ret;
return sprintf(buf, "%d\n", temp);
}
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, ds3231_hwmon_show_temp,
NULL, 0);
static struct attribute *ds3231_hwmon_attrs[] = {
&sensor_dev_attr_temp1_input.dev_attr.attr,
NULL,
};
ATTRIBUTE_GROUPS(ds3231_hwmon);
static void ds1307_hwmon_register(struct ds1307 *ds1307)
{
struct device *dev;
if (ds1307->type != ds_3231)
return;
dev = devm_hwmon_device_register_with_groups(&ds1307->client->dev,
ds1307->client->name,
ds1307, ds3231_hwmon_groups);
if (IS_ERR(dev)) {
dev_warn(&ds1307->client->dev,
"unable to register hwmon device %ld\n", PTR_ERR(dev));
}
}
#else
static void ds1307_hwmon_register(struct ds1307 *ds1307)
{
}
#endif /* CONFIG_RTC_DRV_DS1307_HWMON */
/*----------------------------------------------------------------------*/
/*
* Square-wave output support for DS3231
* Datasheet: https://datasheets.maximintegrated.com/en/ds/DS3231.pdf
*/
#ifdef CONFIG_COMMON_CLK
enum {
DS3231_CLK_SQW = 0,
DS3231_CLK_32KHZ,
};
#define clk_sqw_to_ds1307(clk) \
container_of(clk, struct ds1307, clks[DS3231_CLK_SQW])
#define clk_32khz_to_ds1307(clk) \
container_of(clk, struct ds1307, clks[DS3231_CLK_32KHZ])
static int ds3231_clk_sqw_rates[] = {
1,
1024,
4096,
8192,
};
static int ds1337_write_control(struct ds1307 *ds1307, u8 mask, u8 value)
{
struct i2c_client *client = ds1307->client;
struct mutex *lock = &ds1307->rtc->ops_lock;
int control;
int ret;
mutex_lock(lock);
control = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL);
if (control < 0) {
ret = control;
goto out;
}
control &= ~mask;
control |= value;
ret = i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, control);
out:
mutex_unlock(lock);
return ret;
}
static unsigned long ds3231_clk_sqw_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
int control;
int rate_sel = 0;
control = i2c_smbus_read_byte_data(ds1307->client, DS1337_REG_CONTROL);
if (control < 0)
return control;
if (control & DS1337_BIT_RS1)
rate_sel += 1;
if (control & DS1337_BIT_RS2)
rate_sel += 2;
return ds3231_clk_sqw_rates[rate_sel];
}
static long ds3231_clk_sqw_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *prate)
{
int i;
for (i = ARRAY_SIZE(ds3231_clk_sqw_rates) - 1; i >= 0; i--) {
if (ds3231_clk_sqw_rates[i] <= rate)
return ds3231_clk_sqw_rates[i];
}
return 0;
}
static int ds3231_clk_sqw_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
int control = 0;
int rate_sel;
for (rate_sel = 0; rate_sel < ARRAY_SIZE(ds3231_clk_sqw_rates);
rate_sel++) {
if (ds3231_clk_sqw_rates[rate_sel] == rate)
break;
}
if (rate_sel == ARRAY_SIZE(ds3231_clk_sqw_rates))
return -EINVAL;
if (rate_sel & 1)
control |= DS1337_BIT_RS1;
if (rate_sel & 2)
control |= DS1337_BIT_RS2;
return ds1337_write_control(ds1307, DS1337_BIT_RS1 | DS1337_BIT_RS2,
control);
}
static int ds3231_clk_sqw_prepare(struct clk_hw *hw)
{
struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
return ds1337_write_control(ds1307, DS1337_BIT_INTCN, 0);
}
static void ds3231_clk_sqw_unprepare(struct clk_hw *hw)
{
struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
ds1337_write_control(ds1307, DS1337_BIT_INTCN, DS1337_BIT_INTCN);
}
static int ds3231_clk_sqw_is_prepared(struct clk_hw *hw)
{
struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
int control;
control = i2c_smbus_read_byte_data(ds1307->client, DS1337_REG_CONTROL);
if (control < 0)
return control;
return !(control & DS1337_BIT_INTCN);
}
static const struct clk_ops ds3231_clk_sqw_ops = {
.prepare = ds3231_clk_sqw_prepare,
.unprepare = ds3231_clk_sqw_unprepare,
.is_prepared = ds3231_clk_sqw_is_prepared,
.recalc_rate = ds3231_clk_sqw_recalc_rate,
.round_rate = ds3231_clk_sqw_round_rate,
.set_rate = ds3231_clk_sqw_set_rate,
};
static unsigned long ds3231_clk_32khz_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
return 32768;
}
static int ds3231_clk_32khz_control(struct ds1307 *ds1307, bool enable)
{
struct i2c_client *client = ds1307->client;
struct mutex *lock = &ds1307->rtc->ops_lock;
int status;
int ret;
mutex_lock(lock);
status = i2c_smbus_read_byte_data(client, DS1337_REG_STATUS);
if (status < 0) {
ret = status;
goto out;
}
if (enable)
status |= DS3231_BIT_EN32KHZ;
else
status &= ~DS3231_BIT_EN32KHZ;
ret = i2c_smbus_write_byte_data(client, DS1337_REG_STATUS, status);
out:
mutex_unlock(lock);
return ret;
}
static int ds3231_clk_32khz_prepare(struct clk_hw *hw)
{
struct ds1307 *ds1307 = clk_32khz_to_ds1307(hw);
return ds3231_clk_32khz_control(ds1307, true);
}
static void ds3231_clk_32khz_unprepare(struct clk_hw *hw)
{
struct ds1307 *ds1307 = clk_32khz_to_ds1307(hw);
ds3231_clk_32khz_control(ds1307, false);
}
static int ds3231_clk_32khz_is_prepared(struct clk_hw *hw)
{
struct ds1307 *ds1307 = clk_32khz_to_ds1307(hw);
int status;
status = i2c_smbus_read_byte_data(ds1307->client, DS1337_REG_STATUS);
if (status < 0)
return status;
return !!(status & DS3231_BIT_EN32KHZ);
}
static const struct clk_ops ds3231_clk_32khz_ops = {
.prepare = ds3231_clk_32khz_prepare,
.unprepare = ds3231_clk_32khz_unprepare,
.is_prepared = ds3231_clk_32khz_is_prepared,
.recalc_rate = ds3231_clk_32khz_recalc_rate,
};
static struct clk_init_data ds3231_clks_init[] = {
[DS3231_CLK_SQW] = {
.name = "ds3231_clk_sqw",
.ops = &ds3231_clk_sqw_ops,
},
[DS3231_CLK_32KHZ] = {
.name = "ds3231_clk_32khz",
.ops = &ds3231_clk_32khz_ops,
},
};
static int ds3231_clks_register(struct ds1307 *ds1307)
{
struct i2c_client *client = ds1307->client;
struct device_node *node = client->dev.of_node;
struct clk_onecell_data *onecell;
int i;
onecell = devm_kzalloc(&client->dev, sizeof(*onecell), GFP_KERNEL);
if (!onecell)
return -ENOMEM;
onecell->clk_num = ARRAY_SIZE(ds3231_clks_init);
onecell->clks = devm_kcalloc(&client->dev, onecell->clk_num,
sizeof(onecell->clks[0]), GFP_KERNEL);
if (!onecell->clks)
return -ENOMEM;
for (i = 0; i < ARRAY_SIZE(ds3231_clks_init); i++) {
struct clk_init_data init = ds3231_clks_init[i];
/*
* Interrupt signal due to alarm conditions and square-wave
* output share same pin, so don't initialize both.
*/
if (i == DS3231_CLK_SQW && test_bit(HAS_ALARM, &ds1307->flags))
continue;
/* optional override of the clockname */
of_property_read_string_index(node, "clock-output-names", i,
&init.name);
ds1307->clks[i].init = &init;
onecell->clks[i] = devm_clk_register(&client->dev,
&ds1307->clks[i]);
if (IS_ERR(onecell->clks[i]))
return PTR_ERR(onecell->clks[i]);
}
if (!node)
return 0;
of_clk_add_provider(node, of_clk_src_onecell_get, onecell);
return 0;
}
static void ds1307_clks_register(struct ds1307 *ds1307)
{
int ret;
if (ds1307->type != ds_3231)
return;
ret = ds3231_clks_register(ds1307);
if (ret) {
dev_warn(&ds1307->client->dev,
"unable to register clock device %d\n", ret);
}
}
#else
static void ds1307_clks_register(struct ds1307 *ds1307)
{
}
#endif /* CONFIG_COMMON_CLK */
static int ds1307_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct ds1307 *ds1307;
int err = -ENODEV;
int tmp, wday;
struct chip_desc *chip = &chips[id->driver_data];
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
bool want_irq = false;
bool ds1307_can_wakeup_device = false;
unsigned char *buf;
struct ds1307_platform_data *pdata = dev_get_platdata(&client->dev);
struct rtc_time tm;
unsigned long timestamp;
irq_handler_t irq_handler = ds1307_irq;
static const int bbsqi_bitpos[] = {
[ds_1337] = 0,
[ds_1339] = DS1339_BIT_BBSQI,
[ds_3231] = DS3231_BIT_BBSQW,
};
const struct rtc_class_ops *rtc_ops = &ds13xx_rtc_ops;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)
&& !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
return -EIO;
ds1307 = devm_kzalloc(&client->dev, sizeof(struct ds1307), GFP_KERNEL);
if (!ds1307)
return -ENOMEM;
i2c_set_clientdata(client, ds1307);
ds1307->client = client;
ds1307->type = id->driver_data;
if (!pdata && client->dev.of_node)
ds1307_trickle_of_init(client, chip);
else if (pdata && pdata->trickle_charger_setup)
chip->trickle_charger_setup = pdata->trickle_charger_setup;
if (chip->trickle_charger_setup && chip->trickle_charger_reg) {
dev_dbg(&client->dev, "writing trickle charger info 0x%x to 0x%x\n",
DS13XX_TRICKLE_CHARGER_MAGIC | chip->trickle_charger_setup,
chip->trickle_charger_reg);
i2c_smbus_write_byte_data(client, chip->trickle_charger_reg,
DS13XX_TRICKLE_CHARGER_MAGIC |
chip->trickle_charger_setup);
}
buf = ds1307->regs;
if (i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) {
ds1307->read_block_data = ds1307_native_smbus_read_block_data;
ds1307->write_block_data = ds1307_native_smbus_write_block_data;
} else {
ds1307->read_block_data = ds1307_read_block_data;
ds1307->write_block_data = ds1307_write_block_data;
}
#ifdef CONFIG_OF
/*
* For devices with no IRQ directly connected to the SoC, the RTC chip
* can be forced as a wakeup source by stating that explicitly in
* the device's .dts file using the "wakeup-source" boolean property.
* If the "wakeup-source" property is set, don't request an IRQ.
* This will guarantee the 'wakealarm' sysfs entry is available on the device,
* if supported by the RTC.
*/
if (of_property_read_bool(client->dev.of_node, "wakeup-source")) {
ds1307_can_wakeup_device = true;
}
/* Intersil ISL12057 DT backward compatibility */
if (of_property_read_bool(client->dev.of_node,
"isil,irq2-can-wakeup-machine")) {
ds1307_can_wakeup_device = true;
}
#endif
switch (ds1307->type) {
case ds_1337:
case ds_1339:
case ds_3231:
/* get registers that the "rtc" read below won't read... */
tmp = ds1307->read_block_data(ds1307->client,
DS1337_REG_CONTROL, 2, buf);
if (tmp != 2) {
dev_dbg(&client->dev, "read error %d\n", tmp);
err = -EIO;
goto exit;
}
/* oscillator off? turn it on, so clock can tick. */
if (ds1307->regs[0] & DS1337_BIT_nEOSC)
ds1307->regs[0] &= ~DS1337_BIT_nEOSC;
/*
* Using IRQ or defined as wakeup-source?
* Disable the square wave and both alarms.
* For some variants, be sure alarms can trigger when we're
* running on Vbackup (BBSQI/BBSQW)
*/
if (chip->alarm && (ds1307->client->irq > 0 ||
ds1307_can_wakeup_device)) {
ds1307->regs[0] |= DS1337_BIT_INTCN
| bbsqi_bitpos[ds1307->type];
ds1307->regs[0] &= ~(DS1337_BIT_A2IE | DS1337_BIT_A1IE);
want_irq = true;
}
i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL,
ds1307->regs[0]);
/* oscillator fault? clear flag, and warn */
if (ds1307->regs[1] & DS1337_BIT_OSF) {
i2c_smbus_write_byte_data(client, DS1337_REG_STATUS,
ds1307->regs[1] & ~DS1337_BIT_OSF);
dev_warn(&client->dev, "SET TIME!\n");
}
break;
case rx_8025:
tmp = i2c_smbus_read_i2c_block_data(ds1307->client,
RX8025_REG_CTRL1 << 4 | 0x08, 2, buf);
if (tmp != 2) {
dev_dbg(&client->dev, "read error %d\n", tmp);
err = -EIO;
goto exit;
}
/* oscillator off? turn it on, so clock can tick. */
if (!(ds1307->regs[1] & RX8025_BIT_XST)) {
ds1307->regs[1] |= RX8025_BIT_XST;
i2c_smbus_write_byte_data(client,
RX8025_REG_CTRL2 << 4 | 0x08,
ds1307->regs[1]);
dev_warn(&client->dev,
"oscillator stop detected - SET TIME!\n");
}
if (ds1307->regs[1] & RX8025_BIT_PON) {
ds1307->regs[1] &= ~RX8025_BIT_PON;
i2c_smbus_write_byte_data(client,
RX8025_REG_CTRL2 << 4 | 0x08,
ds1307->regs[1]);
dev_warn(&client->dev, "power-on detected\n");
}
if (ds1307->regs[1] & RX8025_BIT_VDET) {
ds1307->regs[1] &= ~RX8025_BIT_VDET;
i2c_smbus_write_byte_data(client,
RX8025_REG_CTRL2 << 4 | 0x08,
ds1307->regs[1]);
dev_warn(&client->dev, "voltage drop detected\n");
}
/* make sure we are running in 24hour mode */
if (!(ds1307->regs[0] & RX8025_BIT_2412)) {
u8 hour;
/* switch to 24 hour mode */
i2c_smbus_write_byte_data(client,
RX8025_REG_CTRL1 << 4 | 0x08,
ds1307->regs[0] |
RX8025_BIT_2412);
tmp = i2c_smbus_read_i2c_block_data(ds1307->client,
RX8025_REG_CTRL1 << 4 | 0x08, 2, buf);
if (tmp != 2) {
dev_dbg(&client->dev, "read error %d\n", tmp);
err = -EIO;
goto exit;
}
/* correct hour */
hour = bcd2bin(ds1307->regs[DS1307_REG_HOUR]);
if (hour == 12)
hour = 0;
if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
hour += 12;
i2c_smbus_write_byte_data(client,
DS1307_REG_HOUR << 4 | 0x08,
hour);
}
break;
case ds_1388:
ds1307->offset = 1; /* Seconds starts at 1 */
break;
case mcp794xx:
rtc_ops = &mcp794xx_rtc_ops;
if (ds1307->client->irq > 0 && chip->alarm) {
irq_handler = mcp794xx_irq;
want_irq = true;
}
break;
default:
break;
}
read_rtc:
/* read RTC registers */
tmp = ds1307->read_block_data(ds1307->client, ds1307->offset, 8, buf);
if (tmp != 8) {
dev_dbg(&client->dev, "read error %d\n", tmp);
err = -EIO;
goto exit;
}
/*
* minimal sanity checking; some chips (like DS1340) don't
* specify the extra bits as must-be-zero, but there are
* still a few values that are clearly out-of-range.
*/
tmp = ds1307->regs[DS1307_REG_SECS];
switch (ds1307->type) {
case ds_1307:
case m41t00:
/* clock halted? turn it on, so clock can tick. */
if (tmp & DS1307_BIT_CH) {
i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0);
dev_warn(&client->dev, "SET TIME!\n");
goto read_rtc;
}
break;
case ds_1338:
/* clock halted? turn it on, so clock can tick. */
if (tmp & DS1307_BIT_CH)
i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0);
/* oscillator fault? clear flag, and warn */
if (ds1307->regs[DS1307_REG_CONTROL] & DS1338_BIT_OSF) {
i2c_smbus_write_byte_data(client, DS1307_REG_CONTROL,
ds1307->regs[DS1307_REG_CONTROL]
& ~DS1338_BIT_OSF);
dev_warn(&client->dev, "SET TIME!\n");
goto read_rtc;
}
break;
case ds_1340:
/* clock halted? turn it on, so clock can tick. */
if (tmp & DS1340_BIT_nEOSC)
i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0);
tmp = i2c_smbus_read_byte_data(client, DS1340_REG_FLAG);
if (tmp < 0) {
dev_dbg(&client->dev, "read error %d\n", tmp);
err = -EIO;
goto exit;
}
/* oscillator fault? clear flag, and warn */
if (tmp & DS1340_BIT_OSF) {
i2c_smbus_write_byte_data(client, DS1340_REG_FLAG, 0);
dev_warn(&client->dev, "SET TIME!\n");
}
break;
case mcp794xx:
/* make sure that the backup battery is enabled */
if (!(ds1307->regs[DS1307_REG_WDAY] & MCP794XX_BIT_VBATEN)) {
i2c_smbus_write_byte_data(client, DS1307_REG_WDAY,
ds1307->regs[DS1307_REG_WDAY]
| MCP794XX_BIT_VBATEN);
}
/* clock halted? turn it on, so clock can tick. */
if (!(tmp & MCP794XX_BIT_ST)) {
i2c_smbus_write_byte_data(client, DS1307_REG_SECS,
MCP794XX_BIT_ST);
dev_warn(&client->dev, "SET TIME!\n");
goto read_rtc;
}
break;
default:
break;
}
tmp = ds1307->regs[DS1307_REG_HOUR];
switch (ds1307->type) {
case ds_1340:
case m41t00:
/*
* NOTE: ignores century bits; fix before deploying
* systems that will run through year 2100.
*/
break;
case rx_8025:
break;
default:
if (!(tmp & DS1307_BIT_12HR))
break;
/*
* Be sure we're in 24 hour mode. Multi-master systems
* take note...
*/
tmp = bcd2bin(tmp & 0x1f);
if (tmp == 12)
tmp = 0;
if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
tmp += 12;
i2c_smbus_write_byte_data(client,
ds1307->offset + DS1307_REG_HOUR,
bin2bcd(tmp));
}
/*
* Some IPs have weekday reset value = 0x1 which might not correct
* hence compute the wday using the current date/month/year values
*/
ds1307_get_time(&client->dev, &tm);
wday = tm.tm_wday;
timestamp = rtc_tm_to_time64(&tm);
rtc_time64_to_tm(timestamp, &tm);
/*
* Check if reset wday is different from the computed wday
* If different then set the wday which we computed using
* timestamp
*/
if (wday != tm.tm_wday) {
wday = i2c_smbus_read_byte_data(client, MCP794XX_REG_WEEKDAY);
wday = wday & ~MCP794XX_REG_WEEKDAY_WDAY_MASK;
wday = wday | (tm.tm_wday + 1);
i2c_smbus_write_byte_data(client, MCP794XX_REG_WEEKDAY, wday);
}
if (want_irq) {
device_set_wakeup_capable(&client->dev, true);
set_bit(HAS_ALARM, &ds1307->flags);
}
ds1307->rtc = devm_rtc_device_register(&client->dev, client->name,
rtc_ops, THIS_MODULE);
if (IS_ERR(ds1307->rtc)) {
return PTR_ERR(ds1307->rtc);
}
if (ds1307_can_wakeup_device && ds1307->client->irq <= 0) {
/* Disable request for an IRQ */
want_irq = false;
dev_info(&client->dev, "'wakeup-source' is set, request for an IRQ is disabled!\n");
/* We cannot support UIE mode if we do not have an IRQ line */
ds1307->rtc->uie_unsupported = 1;
}
if (want_irq) {
err = devm_request_threaded_irq(&client->dev,
client->irq, NULL, irq_handler,
IRQF_SHARED | IRQF_ONESHOT,
ds1307->rtc->name, client);
if (err) {
client->irq = 0;
device_set_wakeup_capable(&client->dev, false);
clear_bit(HAS_ALARM, &ds1307->flags);
dev_err(&client->dev, "unable to request IRQ!\n");
} else
dev_dbg(&client->dev, "got IRQ %d\n", client->irq);
}
if (chip->nvram_size) {
ds1307->nvram = devm_kzalloc(&client->dev,
sizeof(struct bin_attribute),
GFP_KERNEL);
if (!ds1307->nvram) {
dev_err(&client->dev, "cannot allocate memory for nvram sysfs\n");
} else {
ds1307->nvram->attr.name = "nvram";
ds1307->nvram->attr.mode = S_IRUGO | S_IWUSR;
sysfs_bin_attr_init(ds1307->nvram);
ds1307->nvram->read = ds1307_nvram_read;
ds1307->nvram->write = ds1307_nvram_write;
ds1307->nvram->size = chip->nvram_size;
ds1307->nvram_offset = chip->nvram_offset;
err = sysfs_create_bin_file(&client->dev.kobj,
ds1307->nvram);
if (err) {
dev_err(&client->dev,
"unable to create sysfs file: %s\n",
ds1307->nvram->attr.name);
} else {
set_bit(HAS_NVRAM, &ds1307->flags);
dev_info(&client->dev, "%zu bytes nvram\n",
ds1307->nvram->size);
}
}
}
ds1307_hwmon_register(ds1307);
ds1307_clks_register(ds1307);
return 0;
exit:
return err;
}
static int ds1307_remove(struct i2c_client *client)
{
struct ds1307 *ds1307 = i2c_get_clientdata(client);
if (test_and_clear_bit(HAS_NVRAM, &ds1307->flags))
sysfs_remove_bin_file(&client->dev.kobj, ds1307->nvram);
return 0;
}
static struct i2c_driver ds1307_driver = {
.driver = {
.name = "rtc-ds1307",
},
.probe = ds1307_probe,
.remove = ds1307_remove,
.id_table = ds1307_id,
};
module_i2c_driver(ds1307_driver);
MODULE_DESCRIPTION("RTC driver for DS1307 and similar chips");
MODULE_LICENSE("GPL");