| /* | |
| * 3215 line mode terminal driver. | |
| * | |
| * Copyright IBM Corp. 1999, 2009 | |
| * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com> | |
| * | |
| * Updated: | |
| * Aug-2000: Added tab support | |
| * Dan Morrison, IBM Corporation <dmorriso@cse.buffalo.edu> | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/types.h> | |
| #include <linux/kdev_t.h> | |
| #include <linux/tty.h> | |
| #include <linux/tty_flip.h> | |
| #include <linux/vt_kern.h> | |
| #include <linux/init.h> | |
| #include <linux/console.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/err.h> | |
| #include <linux/reboot.h> | |
| #include <linux/serial.h> /* ASYNC_* flags */ | |
| #include <linux/slab.h> | |
| #include <asm/ccwdev.h> | |
| #include <asm/cio.h> | |
| #include <asm/io.h> | |
| #include <asm/ebcdic.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/delay.h> | |
| #include <asm/cpcmd.h> | |
| #include <asm/setup.h> | |
| #include "ctrlchar.h" | |
| #define NR_3215 1 | |
| #define NR_3215_REQ (4*NR_3215) | |
| #define RAW3215_BUFFER_SIZE 65536 /* output buffer size */ | |
| #define RAW3215_INBUF_SIZE 256 /* input buffer size */ | |
| #define RAW3215_MIN_SPACE 128 /* minimum free space for wakeup */ | |
| #define RAW3215_MIN_WRITE 1024 /* min. length for immediate output */ | |
| #define RAW3215_MAX_BYTES 3968 /* max. bytes to write with one ssch */ | |
| #define RAW3215_MAX_NEWLINE 50 /* max. lines to write with one ssch */ | |
| #define RAW3215_NR_CCWS 3 | |
| #define RAW3215_TIMEOUT HZ/10 /* time for delayed output */ | |
| #define RAW3215_FIXED 1 /* 3215 console device is not be freed */ | |
| #define RAW3215_WORKING 4 /* set if a request is being worked on */ | |
| #define RAW3215_THROTTLED 8 /* set if reading is disabled */ | |
| #define RAW3215_STOPPED 16 /* set if writing is disabled */ | |
| #define RAW3215_TIMER_RUNS 64 /* set if the output delay timer is on */ | |
| #define RAW3215_FLUSHING 128 /* set to flush buffer (no delay) */ | |
| #define TAB_STOP_SIZE 8 /* tab stop size */ | |
| /* | |
| * Request types for a 3215 device | |
| */ | |
| enum raw3215_type { | |
| RAW3215_FREE, RAW3215_READ, RAW3215_WRITE | |
| }; | |
| /* | |
| * Request structure for a 3215 device | |
| */ | |
| struct raw3215_req { | |
| enum raw3215_type type; /* type of the request */ | |
| int start, len; /* start index & len in output buffer */ | |
| int delayable; /* indication to wait for more data */ | |
| int residual; /* residual count for read request */ | |
| struct ccw1 ccws[RAW3215_NR_CCWS]; /* space for the channel program */ | |
| struct raw3215_info *info; /* pointer to main structure */ | |
| struct raw3215_req *next; /* pointer to next request */ | |
| } __attribute__ ((aligned(8))); | |
| struct raw3215_info { | |
| struct tty_port port; | |
| struct ccw_device *cdev; /* device for tty driver */ | |
| spinlock_t *lock; /* pointer to irq lock */ | |
| int flags; /* state flags */ | |
| char *buffer; /* pointer to output buffer */ | |
| char *inbuf; /* pointer to input buffer */ | |
| int head; /* first free byte in output buffer */ | |
| int count; /* number of bytes in output buffer */ | |
| int written; /* number of bytes in write requests */ | |
| struct raw3215_req *queued_read; /* pointer to queued read requests */ | |
| struct raw3215_req *queued_write;/* pointer to queued write requests */ | |
| struct tasklet_struct tlet; /* tasklet to invoke tty_wakeup */ | |
| wait_queue_head_t empty_wait; /* wait queue for flushing */ | |
| struct timer_list timer; /* timer for delayed output */ | |
| int line_pos; /* position on the line (for tabs) */ | |
| char ubuffer[80]; /* copy_from_user buffer */ | |
| }; | |
| /* array of 3215 devices structures */ | |
| static struct raw3215_info *raw3215[NR_3215]; | |
| /* spinlock to protect the raw3215 array */ | |
| static DEFINE_SPINLOCK(raw3215_device_lock); | |
| /* list of free request structures */ | |
| static struct raw3215_req *raw3215_freelist; | |
| /* spinlock to protect free list */ | |
| static spinlock_t raw3215_freelist_lock; | |
| static struct tty_driver *tty3215_driver; | |
| /* | |
| * Get a request structure from the free list | |
| */ | |
| static inline struct raw3215_req *raw3215_alloc_req(void) | |
| { | |
| struct raw3215_req *req; | |
| unsigned long flags; | |
| spin_lock_irqsave(&raw3215_freelist_lock, flags); | |
| req = raw3215_freelist; | |
| raw3215_freelist = req->next; | |
| spin_unlock_irqrestore(&raw3215_freelist_lock, flags); | |
| return req; | |
| } | |
| /* | |
| * Put a request structure back to the free list | |
| */ | |
| static inline void raw3215_free_req(struct raw3215_req *req) | |
| { | |
| unsigned long flags; | |
| if (req->type == RAW3215_FREE) | |
| return; /* don't free a free request */ | |
| req->type = RAW3215_FREE; | |
| spin_lock_irqsave(&raw3215_freelist_lock, flags); | |
| req->next = raw3215_freelist; | |
| raw3215_freelist = req; | |
| spin_unlock_irqrestore(&raw3215_freelist_lock, flags); | |
| } | |
| /* | |
| * Set up a read request that reads up to 160 byte from the 3215 device. | |
| * If there is a queued read request it is used, but that shouldn't happen | |
| * because a 3215 terminal won't accept a new read before the old one is | |
| * completed. | |
| */ | |
| static void raw3215_mk_read_req(struct raw3215_info *raw) | |
| { | |
| struct raw3215_req *req; | |
| struct ccw1 *ccw; | |
| /* there can only be ONE read request at a time */ | |
| req = raw->queued_read; | |
| if (req == NULL) { | |
| /* no queued read request, use new req structure */ | |
| req = raw3215_alloc_req(); | |
| req->type = RAW3215_READ; | |
| req->info = raw; | |
| raw->queued_read = req; | |
| } | |
| ccw = req->ccws; | |
| ccw->cmd_code = 0x0A; /* read inquiry */ | |
| ccw->flags = 0x20; /* ignore incorrect length */ | |
| ccw->count = 160; | |
| ccw->cda = (__u32) __pa(raw->inbuf); | |
| } | |
| /* | |
| * Set up a write request with the information from the main structure. | |
| * A ccw chain is created that writes as much as possible from the output | |
| * buffer to the 3215 device. If a queued write exists it is replaced by | |
| * the new, probably lengthened request. | |
| */ | |
| static void raw3215_mk_write_req(struct raw3215_info *raw) | |
| { | |
| struct raw3215_req *req; | |
| struct ccw1 *ccw; | |
| int len, count, ix, lines; | |
| if (raw->count <= raw->written) | |
| return; | |
| /* check if there is a queued write request */ | |
| req = raw->queued_write; | |
| if (req == NULL) { | |
| /* no queued write request, use new req structure */ | |
| req = raw3215_alloc_req(); | |
| req->type = RAW3215_WRITE; | |
| req->info = raw; | |
| raw->queued_write = req; | |
| } else { | |
| raw->written -= req->len; | |
| } | |
| ccw = req->ccws; | |
| req->start = (raw->head - raw->count + raw->written) & | |
| (RAW3215_BUFFER_SIZE - 1); | |
| /* | |
| * now we have to count newlines. We can at max accept | |
| * RAW3215_MAX_NEWLINE newlines in a single ssch due to | |
| * a restriction in VM | |
| */ | |
| lines = 0; | |
| ix = req->start; | |
| while (lines < RAW3215_MAX_NEWLINE && ix != raw->head) { | |
| if (raw->buffer[ix] == 0x15) | |
| lines++; | |
| ix = (ix + 1) & (RAW3215_BUFFER_SIZE - 1); | |
| } | |
| len = ((ix - 1 - req->start) & (RAW3215_BUFFER_SIZE - 1)) + 1; | |
| if (len > RAW3215_MAX_BYTES) | |
| len = RAW3215_MAX_BYTES; | |
| req->len = len; | |
| raw->written += len; | |
| /* set the indication if we should try to enlarge this request */ | |
| req->delayable = (ix == raw->head) && (len < RAW3215_MIN_WRITE); | |
| ix = req->start; | |
| while (len > 0) { | |
| if (ccw > req->ccws) | |
| ccw[-1].flags |= 0x40; /* use command chaining */ | |
| ccw->cmd_code = 0x01; /* write, auto carrier return */ | |
| ccw->flags = 0x20; /* ignore incorrect length ind. */ | |
| ccw->cda = | |
| (__u32) __pa(raw->buffer + ix); | |
| count = len; | |
| if (ix + count > RAW3215_BUFFER_SIZE) | |
| count = RAW3215_BUFFER_SIZE - ix; | |
| ccw->count = count; | |
| len -= count; | |
| ix = (ix + count) & (RAW3215_BUFFER_SIZE - 1); | |
| ccw++; | |
| } | |
| /* | |
| * Add a NOP to the channel program. 3215 devices are purely | |
| * emulated and its much better to avoid the channel end | |
| * interrupt in this case. | |
| */ | |
| if (ccw > req->ccws) | |
| ccw[-1].flags |= 0x40; /* use command chaining */ | |
| ccw->cmd_code = 0x03; /* NOP */ | |
| ccw->flags = 0; | |
| ccw->cda = 0; | |
| ccw->count = 1; | |
| } | |
| /* | |
| * Start a read or a write request | |
| */ | |
| static void raw3215_start_io(struct raw3215_info *raw) | |
| { | |
| struct raw3215_req *req; | |
| int res; | |
| req = raw->queued_read; | |
| if (req != NULL && | |
| !(raw->flags & (RAW3215_WORKING | RAW3215_THROTTLED))) { | |
| /* dequeue request */ | |
| raw->queued_read = NULL; | |
| res = ccw_device_start(raw->cdev, req->ccws, | |
| (unsigned long) req, 0, 0); | |
| if (res != 0) { | |
| /* do_IO failed, put request back to queue */ | |
| raw->queued_read = req; | |
| } else { | |
| raw->flags |= RAW3215_WORKING; | |
| } | |
| } | |
| req = raw->queued_write; | |
| if (req != NULL && | |
| !(raw->flags & (RAW3215_WORKING | RAW3215_STOPPED))) { | |
| /* dequeue request */ | |
| raw->queued_write = NULL; | |
| res = ccw_device_start(raw->cdev, req->ccws, | |
| (unsigned long) req, 0, 0); | |
| if (res != 0) { | |
| /* do_IO failed, put request back to queue */ | |
| raw->queued_write = req; | |
| } else { | |
| raw->flags |= RAW3215_WORKING; | |
| } | |
| } | |
| } | |
| /* | |
| * Function to start a delayed output after RAW3215_TIMEOUT seconds | |
| */ | |
| static void raw3215_timeout(unsigned long __data) | |
| { | |
| struct raw3215_info *raw = (struct raw3215_info *) __data; | |
| unsigned long flags; | |
| spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags); | |
| raw->flags &= ~RAW3215_TIMER_RUNS; | |
| if (!tty_port_suspended(&raw->port)) { | |
| raw3215_mk_write_req(raw); | |
| raw3215_start_io(raw); | |
| if ((raw->queued_read || raw->queued_write) && | |
| !(raw->flags & RAW3215_WORKING) && | |
| !(raw->flags & RAW3215_TIMER_RUNS)) { | |
| raw->timer.expires = RAW3215_TIMEOUT + jiffies; | |
| add_timer(&raw->timer); | |
| raw->flags |= RAW3215_TIMER_RUNS; | |
| } | |
| } | |
| spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags); | |
| } | |
| /* | |
| * Function to conditionally start an IO. A read is started immediately, | |
| * a write is only started immediately if the flush flag is on or the | |
| * amount of data is bigger than RAW3215_MIN_WRITE. If a write is not | |
| * done immediately a timer is started with a delay of RAW3215_TIMEOUT. | |
| */ | |
| static inline void raw3215_try_io(struct raw3215_info *raw) | |
| { | |
| if (!tty_port_initialized(&raw->port) || tty_port_suspended(&raw->port)) | |
| return; | |
| if (raw->queued_read != NULL) | |
| raw3215_start_io(raw); | |
| else if (raw->queued_write != NULL) { | |
| if ((raw->queued_write->delayable == 0) || | |
| (raw->flags & RAW3215_FLUSHING)) { | |
| /* execute write requests bigger than minimum size */ | |
| raw3215_start_io(raw); | |
| } | |
| } | |
| if ((raw->queued_read || raw->queued_write) && | |
| !(raw->flags & RAW3215_WORKING) && | |
| !(raw->flags & RAW3215_TIMER_RUNS)) { | |
| raw->timer.expires = RAW3215_TIMEOUT + jiffies; | |
| add_timer(&raw->timer); | |
| raw->flags |= RAW3215_TIMER_RUNS; | |
| } | |
| } | |
| /* | |
| * Call tty_wakeup from tasklet context | |
| */ | |
| static void raw3215_wakeup(unsigned long data) | |
| { | |
| struct raw3215_info *raw = (struct raw3215_info *) data; | |
| struct tty_struct *tty; | |
| tty = tty_port_tty_get(&raw->port); | |
| if (tty) { | |
| tty_wakeup(tty); | |
| tty_kref_put(tty); | |
| } | |
| } | |
| /* | |
| * Try to start the next IO and wake up processes waiting on the tty. | |
| */ | |
| static void raw3215_next_io(struct raw3215_info *raw, struct tty_struct *tty) | |
| { | |
| raw3215_mk_write_req(raw); | |
| raw3215_try_io(raw); | |
| if (tty && RAW3215_BUFFER_SIZE - raw->count >= RAW3215_MIN_SPACE) | |
| tasklet_schedule(&raw->tlet); | |
| } | |
| /* | |
| * Interrupt routine, called from common io layer | |
| */ | |
| static void raw3215_irq(struct ccw_device *cdev, unsigned long intparm, | |
| struct irb *irb) | |
| { | |
| struct raw3215_info *raw; | |
| struct raw3215_req *req; | |
| struct tty_struct *tty; | |
| int cstat, dstat; | |
| int count; | |
| raw = dev_get_drvdata(&cdev->dev); | |
| req = (struct raw3215_req *) intparm; | |
| tty = tty_port_tty_get(&raw->port); | |
| cstat = irb->scsw.cmd.cstat; | |
| dstat = irb->scsw.cmd.dstat; | |
| if (cstat != 0) | |
| raw3215_next_io(raw, tty); | |
| if (dstat & 0x01) { /* we got a unit exception */ | |
| dstat &= ~0x01; /* we can ignore it */ | |
| } | |
| switch (dstat) { | |
| case 0x80: | |
| if (cstat != 0) | |
| break; | |
| /* Attention interrupt, someone hit the enter key */ | |
| raw3215_mk_read_req(raw); | |
| raw3215_next_io(raw, tty); | |
| break; | |
| case 0x08: | |
| case 0x0C: | |
| /* Channel end interrupt. */ | |
| if ((raw = req->info) == NULL) | |
| goto put_tty; /* That shouldn't happen ... */ | |
| if (req->type == RAW3215_READ) { | |
| /* store residual count, then wait for device end */ | |
| req->residual = irb->scsw.cmd.count; | |
| } | |
| if (dstat == 0x08) | |
| break; | |
| case 0x04: | |
| /* Device end interrupt. */ | |
| if ((raw = req->info) == NULL) | |
| goto put_tty; /* That shouldn't happen ... */ | |
| if (req->type == RAW3215_READ && tty != NULL) { | |
| unsigned int cchar; | |
| count = 160 - req->residual; | |
| EBCASC(raw->inbuf, count); | |
| cchar = ctrlchar_handle(raw->inbuf, count, tty); | |
| switch (cchar & CTRLCHAR_MASK) { | |
| case CTRLCHAR_SYSRQ: | |
| break; | |
| case CTRLCHAR_CTRL: | |
| tty_insert_flip_char(&raw->port, cchar, | |
| TTY_NORMAL); | |
| tty_flip_buffer_push(&raw->port); | |
| break; | |
| case CTRLCHAR_NONE: | |
| if (count < 2 || | |
| (strncmp(raw->inbuf+count-2, "\252n", 2) && | |
| strncmp(raw->inbuf+count-2, "^n", 2)) ) { | |
| /* add the auto \n */ | |
| raw->inbuf[count] = '\n'; | |
| count++; | |
| } else | |
| count -= 2; | |
| tty_insert_flip_string(&raw->port, raw->inbuf, | |
| count); | |
| tty_flip_buffer_push(&raw->port); | |
| break; | |
| } | |
| } else if (req->type == RAW3215_WRITE) { | |
| raw->count -= req->len; | |
| raw->written -= req->len; | |
| } | |
| raw->flags &= ~RAW3215_WORKING; | |
| raw3215_free_req(req); | |
| /* check for empty wait */ | |
| if (waitqueue_active(&raw->empty_wait) && | |
| raw->queued_write == NULL && | |
| raw->queued_read == NULL) { | |
| wake_up_interruptible(&raw->empty_wait); | |
| } | |
| raw3215_next_io(raw, tty); | |
| break; | |
| default: | |
| /* Strange interrupt, I'll do my best to clean up */ | |
| if (req != NULL && req->type != RAW3215_FREE) { | |
| if (req->type == RAW3215_WRITE) { | |
| raw->count -= req->len; | |
| raw->written -= req->len; | |
| } | |
| raw->flags &= ~RAW3215_WORKING; | |
| raw3215_free_req(req); | |
| } | |
| raw3215_next_io(raw, tty); | |
| } | |
| put_tty: | |
| tty_kref_put(tty); | |
| } | |
| /* | |
| * Drop the oldest line from the output buffer. | |
| */ | |
| static void raw3215_drop_line(struct raw3215_info *raw) | |
| { | |
| int ix; | |
| char ch; | |
| BUG_ON(raw->written != 0); | |
| ix = (raw->head - raw->count) & (RAW3215_BUFFER_SIZE - 1); | |
| while (raw->count > 0) { | |
| ch = raw->buffer[ix]; | |
| ix = (ix + 1) & (RAW3215_BUFFER_SIZE - 1); | |
| raw->count--; | |
| if (ch == 0x15) | |
| break; | |
| } | |
| raw->head = ix; | |
| } | |
| /* | |
| * Wait until length bytes are available int the output buffer. | |
| * Has to be called with the s390irq lock held. Can be called | |
| * disabled. | |
| */ | |
| static void raw3215_make_room(struct raw3215_info *raw, unsigned int length) | |
| { | |
| while (RAW3215_BUFFER_SIZE - raw->count < length) { | |
| /* While console is frozen for suspend we have no other | |
| * choice but to drop message from the buffer to make | |
| * room for even more messages. */ | |
| if (tty_port_suspended(&raw->port)) { | |
| raw3215_drop_line(raw); | |
| continue; | |
| } | |
| /* there might be a request pending */ | |
| raw->flags |= RAW3215_FLUSHING; | |
| raw3215_mk_write_req(raw); | |
| raw3215_try_io(raw); | |
| raw->flags &= ~RAW3215_FLUSHING; | |
| #ifdef CONFIG_TN3215_CONSOLE | |
| ccw_device_wait_idle(raw->cdev); | |
| #endif | |
| /* Enough room freed up ? */ | |
| if (RAW3215_BUFFER_SIZE - raw->count >= length) | |
| break; | |
| /* there might be another cpu waiting for the lock */ | |
| spin_unlock(get_ccwdev_lock(raw->cdev)); | |
| udelay(100); | |
| spin_lock(get_ccwdev_lock(raw->cdev)); | |
| } | |
| } | |
| /* | |
| * String write routine for 3215 devices | |
| */ | |
| static void raw3215_write(struct raw3215_info *raw, const char *str, | |
| unsigned int length) | |
| { | |
| unsigned long flags; | |
| int c, count; | |
| while (length > 0) { | |
| spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags); | |
| count = (length > RAW3215_BUFFER_SIZE) ? | |
| RAW3215_BUFFER_SIZE : length; | |
| length -= count; | |
| raw3215_make_room(raw, count); | |
| /* copy string to output buffer and convert it to EBCDIC */ | |
| while (1) { | |
| c = min_t(int, count, | |
| min(RAW3215_BUFFER_SIZE - raw->count, | |
| RAW3215_BUFFER_SIZE - raw->head)); | |
| if (c <= 0) | |
| break; | |
| memcpy(raw->buffer + raw->head, str, c); | |
| ASCEBC(raw->buffer + raw->head, c); | |
| raw->head = (raw->head + c) & (RAW3215_BUFFER_SIZE - 1); | |
| raw->count += c; | |
| raw->line_pos += c; | |
| str += c; | |
| count -= c; | |
| } | |
| if (!(raw->flags & RAW3215_WORKING)) { | |
| raw3215_mk_write_req(raw); | |
| /* start or queue request */ | |
| raw3215_try_io(raw); | |
| } | |
| spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags); | |
| } | |
| } | |
| /* | |
| * Put character routine for 3215 devices | |
| */ | |
| static void raw3215_putchar(struct raw3215_info *raw, unsigned char ch) | |
| { | |
| unsigned long flags; | |
| unsigned int length, i; | |
| spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags); | |
| if (ch == '\t') { | |
| length = TAB_STOP_SIZE - (raw->line_pos%TAB_STOP_SIZE); | |
| raw->line_pos += length; | |
| ch = ' '; | |
| } else if (ch == '\n') { | |
| length = 1; | |
| raw->line_pos = 0; | |
| } else { | |
| length = 1; | |
| raw->line_pos++; | |
| } | |
| raw3215_make_room(raw, length); | |
| for (i = 0; i < length; i++) { | |
| raw->buffer[raw->head] = (char) _ascebc[(int) ch]; | |
| raw->head = (raw->head + 1) & (RAW3215_BUFFER_SIZE - 1); | |
| raw->count++; | |
| } | |
| if (!(raw->flags & RAW3215_WORKING)) { | |
| raw3215_mk_write_req(raw); | |
| /* start or queue request */ | |
| raw3215_try_io(raw); | |
| } | |
| spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags); | |
| } | |
| /* | |
| * Flush routine, it simply sets the flush flag and tries to start | |
| * pending IO. | |
| */ | |
| static void raw3215_flush_buffer(struct raw3215_info *raw) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags); | |
| if (raw->count > 0) { | |
| raw->flags |= RAW3215_FLUSHING; | |
| raw3215_try_io(raw); | |
| raw->flags &= ~RAW3215_FLUSHING; | |
| } | |
| spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags); | |
| } | |
| /* | |
| * Fire up a 3215 device. | |
| */ | |
| static int raw3215_startup(struct raw3215_info *raw) | |
| { | |
| unsigned long flags; | |
| if (tty_port_initialized(&raw->port)) | |
| return 0; | |
| raw->line_pos = 0; | |
| tty_port_set_initialized(&raw->port, 1); | |
| spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags); | |
| raw3215_try_io(raw); | |
| spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags); | |
| return 0; | |
| } | |
| /* | |
| * Shutdown a 3215 device. | |
| */ | |
| static void raw3215_shutdown(struct raw3215_info *raw) | |
| { | |
| DECLARE_WAITQUEUE(wait, current); | |
| unsigned long flags; | |
| if (!tty_port_initialized(&raw->port) || (raw->flags & RAW3215_FIXED)) | |
| return; | |
| /* Wait for outstanding requests, then free irq */ | |
| spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags); | |
| if ((raw->flags & RAW3215_WORKING) || | |
| raw->queued_write != NULL || | |
| raw->queued_read != NULL) { | |
| add_wait_queue(&raw->empty_wait, &wait); | |
| set_current_state(TASK_INTERRUPTIBLE); | |
| spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags); | |
| schedule(); | |
| spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags); | |
| remove_wait_queue(&raw->empty_wait, &wait); | |
| set_current_state(TASK_RUNNING); | |
| tty_port_set_initialized(&raw->port, 1); | |
| } | |
| spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags); | |
| } | |
| static struct raw3215_info *raw3215_alloc_info(void) | |
| { | |
| struct raw3215_info *info; | |
| info = kzalloc(sizeof(struct raw3215_info), GFP_KERNEL | GFP_DMA); | |
| if (!info) | |
| return NULL; | |
| info->buffer = kzalloc(RAW3215_BUFFER_SIZE, GFP_KERNEL | GFP_DMA); | |
| info->inbuf = kzalloc(RAW3215_INBUF_SIZE, GFP_KERNEL | GFP_DMA); | |
| if (!info->buffer || !info->inbuf) { | |
| kfree(info->inbuf); | |
| kfree(info->buffer); | |
| kfree(info); | |
| return NULL; | |
| } | |
| setup_timer(&info->timer, raw3215_timeout, (unsigned long)info); | |
| init_waitqueue_head(&info->empty_wait); | |
| tasklet_init(&info->tlet, raw3215_wakeup, (unsigned long)info); | |
| tty_port_init(&info->port); | |
| return info; | |
| } | |
| static void raw3215_free_info(struct raw3215_info *raw) | |
| { | |
| kfree(raw->inbuf); | |
| kfree(raw->buffer); | |
| tty_port_destroy(&raw->port); | |
| kfree(raw); | |
| } | |
| static int raw3215_probe (struct ccw_device *cdev) | |
| { | |
| struct raw3215_info *raw; | |
| int line; | |
| /* Console is special. */ | |
| if (raw3215[0] && (raw3215[0] == dev_get_drvdata(&cdev->dev))) | |
| return 0; | |
| raw = raw3215_alloc_info(); | |
| if (raw == NULL) | |
| return -ENOMEM; | |
| raw->cdev = cdev; | |
| dev_set_drvdata(&cdev->dev, raw); | |
| cdev->handler = raw3215_irq; | |
| spin_lock(&raw3215_device_lock); | |
| for (line = 0; line < NR_3215; line++) { | |
| if (!raw3215[line]) { | |
| raw3215[line] = raw; | |
| break; | |
| } | |
| } | |
| spin_unlock(&raw3215_device_lock); | |
| if (line == NR_3215) { | |
| raw3215_free_info(raw); | |
| return -ENODEV; | |
| } | |
| return 0; | |
| } | |
| static void raw3215_remove (struct ccw_device *cdev) | |
| { | |
| struct raw3215_info *raw; | |
| unsigned int line; | |
| ccw_device_set_offline(cdev); | |
| raw = dev_get_drvdata(&cdev->dev); | |
| if (raw) { | |
| spin_lock(&raw3215_device_lock); | |
| for (line = 0; line < NR_3215; line++) | |
| if (raw3215[line] == raw) | |
| break; | |
| raw3215[line] = NULL; | |
| spin_unlock(&raw3215_device_lock); | |
| dev_set_drvdata(&cdev->dev, NULL); | |
| raw3215_free_info(raw); | |
| } | |
| } | |
| static int raw3215_set_online (struct ccw_device *cdev) | |
| { | |
| struct raw3215_info *raw; | |
| raw = dev_get_drvdata(&cdev->dev); | |
| if (!raw) | |
| return -ENODEV; | |
| return raw3215_startup(raw); | |
| } | |
| static int raw3215_set_offline (struct ccw_device *cdev) | |
| { | |
| struct raw3215_info *raw; | |
| raw = dev_get_drvdata(&cdev->dev); | |
| if (!raw) | |
| return -ENODEV; | |
| raw3215_shutdown(raw); | |
| return 0; | |
| } | |
| static int raw3215_pm_stop(struct ccw_device *cdev) | |
| { | |
| struct raw3215_info *raw; | |
| unsigned long flags; | |
| /* Empty the output buffer, then prevent new I/O. */ | |
| raw = dev_get_drvdata(&cdev->dev); | |
| spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags); | |
| raw3215_make_room(raw, RAW3215_BUFFER_SIZE); | |
| tty_port_set_suspended(&raw->port, 1); | |
| spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags); | |
| return 0; | |
| } | |
| static int raw3215_pm_start(struct ccw_device *cdev) | |
| { | |
| struct raw3215_info *raw; | |
| unsigned long flags; | |
| /* Allow I/O again and flush output buffer. */ | |
| raw = dev_get_drvdata(&cdev->dev); | |
| spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags); | |
| tty_port_set_suspended(&raw->port, 0); | |
| raw->flags |= RAW3215_FLUSHING; | |
| raw3215_try_io(raw); | |
| raw->flags &= ~RAW3215_FLUSHING; | |
| spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags); | |
| return 0; | |
| } | |
| static struct ccw_device_id raw3215_id[] = { | |
| { CCW_DEVICE(0x3215, 0) }, | |
| { /* end of list */ }, | |
| }; | |
| static struct ccw_driver raw3215_ccw_driver = { | |
| .driver = { | |
| .name = "3215", | |
| .owner = THIS_MODULE, | |
| }, | |
| .ids = raw3215_id, | |
| .probe = &raw3215_probe, | |
| .remove = &raw3215_remove, | |
| .set_online = &raw3215_set_online, | |
| .set_offline = &raw3215_set_offline, | |
| .freeze = &raw3215_pm_stop, | |
| .thaw = &raw3215_pm_start, | |
| .restore = &raw3215_pm_start, | |
| .int_class = IRQIO_C15, | |
| }; | |
| #ifdef CONFIG_TN3215_CONSOLE | |
| /* | |
| * Write a string to the 3215 console | |
| */ | |
| static void con3215_write(struct console *co, const char *str, | |
| unsigned int count) | |
| { | |
| struct raw3215_info *raw; | |
| int i; | |
| if (count <= 0) | |
| return; | |
| raw = raw3215[0]; /* console 3215 is the first one */ | |
| while (count > 0) { | |
| for (i = 0; i < count; i++) | |
| if (str[i] == '\t' || str[i] == '\n') | |
| break; | |
| raw3215_write(raw, str, i); | |
| count -= i; | |
| str += i; | |
| if (count > 0) { | |
| raw3215_putchar(raw, *str); | |
| count--; | |
| str++; | |
| } | |
| } | |
| } | |
| static struct tty_driver *con3215_device(struct console *c, int *index) | |
| { | |
| *index = c->index; | |
| return tty3215_driver; | |
| } | |
| /* | |
| * panic() calls con3215_flush through a panic_notifier | |
| * before the system enters a disabled, endless loop. | |
| */ | |
| static void con3215_flush(void) | |
| { | |
| struct raw3215_info *raw; | |
| unsigned long flags; | |
| raw = raw3215[0]; /* console 3215 is the first one */ | |
| if (tty_port_suspended(&raw->port)) | |
| /* The console is still frozen for suspend. */ | |
| if (ccw_device_force_console(raw->cdev)) | |
| /* Forcing didn't work, no panic message .. */ | |
| return; | |
| spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags); | |
| raw3215_make_room(raw, RAW3215_BUFFER_SIZE); | |
| spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags); | |
| } | |
| static int con3215_notify(struct notifier_block *self, | |
| unsigned long event, void *data) | |
| { | |
| con3215_flush(); | |
| return NOTIFY_OK; | |
| } | |
| static struct notifier_block on_panic_nb = { | |
| .notifier_call = con3215_notify, | |
| .priority = 0, | |
| }; | |
| static struct notifier_block on_reboot_nb = { | |
| .notifier_call = con3215_notify, | |
| .priority = 0, | |
| }; | |
| /* | |
| * The console structure for the 3215 console | |
| */ | |
| static struct console con3215 = { | |
| .name = "ttyS", | |
| .write = con3215_write, | |
| .device = con3215_device, | |
| .flags = CON_PRINTBUFFER, | |
| }; | |
| /* | |
| * 3215 console initialization code called from console_init(). | |
| */ | |
| static int __init con3215_init(void) | |
| { | |
| struct ccw_device *cdev; | |
| struct raw3215_info *raw; | |
| struct raw3215_req *req; | |
| int i; | |
| /* Check if 3215 is to be the console */ | |
| if (!CONSOLE_IS_3215) | |
| return -ENODEV; | |
| /* Set the console mode for VM */ | |
| if (MACHINE_IS_VM) { | |
| cpcmd("TERM CONMODE 3215", NULL, 0, NULL); | |
| cpcmd("TERM AUTOCR OFF", NULL, 0, NULL); | |
| } | |
| /* allocate 3215 request structures */ | |
| raw3215_freelist = NULL; | |
| spin_lock_init(&raw3215_freelist_lock); | |
| for (i = 0; i < NR_3215_REQ; i++) { | |
| req = kzalloc(sizeof(struct raw3215_req), GFP_KERNEL | GFP_DMA); | |
| if (!req) | |
| return -ENOMEM; | |
| req->next = raw3215_freelist; | |
| raw3215_freelist = req; | |
| } | |
| cdev = ccw_device_create_console(&raw3215_ccw_driver); | |
| if (IS_ERR(cdev)) | |
| return -ENODEV; | |
| raw3215[0] = raw = raw3215_alloc_info(); | |
| raw->cdev = cdev; | |
| dev_set_drvdata(&cdev->dev, raw); | |
| cdev->handler = raw3215_irq; | |
| raw->flags |= RAW3215_FIXED; | |
| if (ccw_device_enable_console(cdev)) { | |
| ccw_device_destroy_console(cdev); | |
| raw3215_free_info(raw); | |
| raw3215[0] = NULL; | |
| return -ENODEV; | |
| } | |
| /* Request the console irq */ | |
| if (raw3215_startup(raw) != 0) { | |
| raw3215_free_info(raw); | |
| raw3215[0] = NULL; | |
| return -ENODEV; | |
| } | |
| atomic_notifier_chain_register(&panic_notifier_list, &on_panic_nb); | |
| register_reboot_notifier(&on_reboot_nb); | |
| register_console(&con3215); | |
| return 0; | |
| } | |
| console_initcall(con3215_init); | |
| #endif | |
| static int tty3215_install(struct tty_driver *driver, struct tty_struct *tty) | |
| { | |
| struct raw3215_info *raw; | |
| raw = raw3215[tty->index]; | |
| if (raw == NULL) | |
| return -ENODEV; | |
| tty->driver_data = raw; | |
| return tty_port_install(&raw->port, driver, tty); | |
| } | |
| /* | |
| * tty3215_open | |
| * | |
| * This routine is called whenever a 3215 tty is opened. | |
| */ | |
| static int tty3215_open(struct tty_struct *tty, struct file * filp) | |
| { | |
| struct raw3215_info *raw = tty->driver_data; | |
| int retval; | |
| tty_port_tty_set(&raw->port, tty); | |
| raw->port.low_latency = 0; /* don't use bottom half for pushing chars */ | |
| /* | |
| * Start up 3215 device | |
| */ | |
| retval = raw3215_startup(raw); | |
| if (retval) | |
| return retval; | |
| return 0; | |
| } | |
| /* | |
| * tty3215_close() | |
| * | |
| * This routine is called when the 3215 tty is closed. We wait | |
| * for the remaining request to be completed. Then we clean up. | |
| */ | |
| static void tty3215_close(struct tty_struct *tty, struct file * filp) | |
| { | |
| struct raw3215_info *raw; | |
| raw = (struct raw3215_info *) tty->driver_data; | |
| if (raw == NULL || tty->count > 1) | |
| return; | |
| tty->closing = 1; | |
| /* Shutdown the terminal */ | |
| raw3215_shutdown(raw); | |
| tasklet_kill(&raw->tlet); | |
| tty->closing = 0; | |
| tty_port_tty_set(&raw->port, NULL); | |
| } | |
| /* | |
| * Returns the amount of free space in the output buffer. | |
| */ | |
| static int tty3215_write_room(struct tty_struct *tty) | |
| { | |
| struct raw3215_info *raw; | |
| raw = (struct raw3215_info *) tty->driver_data; | |
| /* Subtract TAB_STOP_SIZE to allow for a tab, 8 <<< 64K */ | |
| if ((RAW3215_BUFFER_SIZE - raw->count - TAB_STOP_SIZE) >= 0) | |
| return RAW3215_BUFFER_SIZE - raw->count - TAB_STOP_SIZE; | |
| else | |
| return 0; | |
| } | |
| /* | |
| * String write routine for 3215 ttys | |
| */ | |
| static int tty3215_write(struct tty_struct * tty, | |
| const unsigned char *buf, int count) | |
| { | |
| struct raw3215_info *raw; | |
| int i, written; | |
| if (!tty) | |
| return 0; | |
| raw = (struct raw3215_info *) tty->driver_data; | |
| written = count; | |
| while (count > 0) { | |
| for (i = 0; i < count; i++) | |
| if (buf[i] == '\t' || buf[i] == '\n') | |
| break; | |
| raw3215_write(raw, buf, i); | |
| count -= i; | |
| buf += i; | |
| if (count > 0) { | |
| raw3215_putchar(raw, *buf); | |
| count--; | |
| buf++; | |
| } | |
| } | |
| return written; | |
| } | |
| /* | |
| * Put character routine for 3215 ttys | |
| */ | |
| static int tty3215_put_char(struct tty_struct *tty, unsigned char ch) | |
| { | |
| struct raw3215_info *raw; | |
| if (!tty) | |
| return 0; | |
| raw = (struct raw3215_info *) tty->driver_data; | |
| raw3215_putchar(raw, ch); | |
| return 1; | |
| } | |
| static void tty3215_flush_chars(struct tty_struct *tty) | |
| { | |
| } | |
| /* | |
| * Returns the number of characters in the output buffer | |
| */ | |
| static int tty3215_chars_in_buffer(struct tty_struct *tty) | |
| { | |
| struct raw3215_info *raw; | |
| raw = (struct raw3215_info *) tty->driver_data; | |
| return raw->count; | |
| } | |
| static void tty3215_flush_buffer(struct tty_struct *tty) | |
| { | |
| struct raw3215_info *raw; | |
| raw = (struct raw3215_info *) tty->driver_data; | |
| raw3215_flush_buffer(raw); | |
| tty_wakeup(tty); | |
| } | |
| /* | |
| * Disable reading from a 3215 tty | |
| */ | |
| static void tty3215_throttle(struct tty_struct * tty) | |
| { | |
| struct raw3215_info *raw; | |
| raw = (struct raw3215_info *) tty->driver_data; | |
| raw->flags |= RAW3215_THROTTLED; | |
| } | |
| /* | |
| * Enable reading from a 3215 tty | |
| */ | |
| static void tty3215_unthrottle(struct tty_struct * tty) | |
| { | |
| struct raw3215_info *raw; | |
| unsigned long flags; | |
| raw = (struct raw3215_info *) tty->driver_data; | |
| if (raw->flags & RAW3215_THROTTLED) { | |
| spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags); | |
| raw->flags &= ~RAW3215_THROTTLED; | |
| raw3215_try_io(raw); | |
| spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags); | |
| } | |
| } | |
| /* | |
| * Disable writing to a 3215 tty | |
| */ | |
| static void tty3215_stop(struct tty_struct *tty) | |
| { | |
| struct raw3215_info *raw; | |
| raw = (struct raw3215_info *) tty->driver_data; | |
| raw->flags |= RAW3215_STOPPED; | |
| } | |
| /* | |
| * Enable writing to a 3215 tty | |
| */ | |
| static void tty3215_start(struct tty_struct *tty) | |
| { | |
| struct raw3215_info *raw; | |
| unsigned long flags; | |
| raw = (struct raw3215_info *) tty->driver_data; | |
| if (raw->flags & RAW3215_STOPPED) { | |
| spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags); | |
| raw->flags &= ~RAW3215_STOPPED; | |
| raw3215_try_io(raw); | |
| spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags); | |
| } | |
| } | |
| static const struct tty_operations tty3215_ops = { | |
| .install = tty3215_install, | |
| .open = tty3215_open, | |
| .close = tty3215_close, | |
| .write = tty3215_write, | |
| .put_char = tty3215_put_char, | |
| .flush_chars = tty3215_flush_chars, | |
| .write_room = tty3215_write_room, | |
| .chars_in_buffer = tty3215_chars_in_buffer, | |
| .flush_buffer = tty3215_flush_buffer, | |
| .throttle = tty3215_throttle, | |
| .unthrottle = tty3215_unthrottle, | |
| .stop = tty3215_stop, | |
| .start = tty3215_start, | |
| }; | |
| /* | |
| * 3215 tty registration code called from tty_init(). | |
| * Most kernel services (incl. kmalloc) are available at this poimt. | |
| */ | |
| static int __init tty3215_init(void) | |
| { | |
| struct tty_driver *driver; | |
| int ret; | |
| if (!CONSOLE_IS_3215) | |
| return 0; | |
| driver = alloc_tty_driver(NR_3215); | |
| if (!driver) | |
| return -ENOMEM; | |
| ret = ccw_driver_register(&raw3215_ccw_driver); | |
| if (ret) { | |
| put_tty_driver(driver); | |
| return ret; | |
| } | |
| /* | |
| * Initialize the tty_driver structure | |
| * Entries in tty3215_driver that are NOT initialized: | |
| * proc_entry, set_termios, flush_buffer, set_ldisc, write_proc | |
| */ | |
| driver->driver_name = "tty3215"; | |
| driver->name = "ttyS"; | |
| driver->major = TTY_MAJOR; | |
| driver->minor_start = 64; | |
| driver->type = TTY_DRIVER_TYPE_SYSTEM; | |
| driver->subtype = SYSTEM_TYPE_TTY; | |
| driver->init_termios = tty_std_termios; | |
| driver->init_termios.c_iflag = IGNBRK | IGNPAR; | |
| driver->init_termios.c_oflag = ONLCR; | |
| driver->init_termios.c_lflag = ISIG; | |
| driver->flags = TTY_DRIVER_REAL_RAW; | |
| tty_set_operations(driver, &tty3215_ops); | |
| ret = tty_register_driver(driver); | |
| if (ret) { | |
| put_tty_driver(driver); | |
| return ret; | |
| } | |
| tty3215_driver = driver; | |
| return 0; | |
| } | |
| static void __exit tty3215_exit(void) | |
| { | |
| tty_unregister_driver(tty3215_driver); | |
| put_tty_driver(tty3215_driver); | |
| ccw_driver_unregister(&raw3215_ccw_driver); | |
| } | |
| module_init(tty3215_init); | |
| module_exit(tty3215_exit); |