| /* | |
| * tape device driver for 3480/3490E/3590 tapes. | |
| * | |
| * S390 and zSeries version | |
| * Copyright IBM Corp. 2001, 2009 | |
| * Author(s): Carsten Otte <cotte@de.ibm.com> | |
| * Tuan Ngo-Anh <ngoanh@de.ibm.com> | |
| * Martin Schwidefsky <schwidefsky@de.ibm.com> | |
| * Stefan Bader <shbader@de.ibm.com> | |
| */ | |
| #ifndef _TAPE_H | |
| #define _TAPE_H | |
| #include <asm/ccwdev.h> | |
| #include <asm/debug.h> | |
| #include <asm/idals.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/mtio.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/workqueue.h> | |
| struct gendisk; | |
| /* | |
| * Define DBF_LIKE_HELL for lots of messages in the debug feature. | |
| */ | |
| #define DBF_LIKE_HELL | |
| #ifdef DBF_LIKE_HELL | |
| #define DBF_LH(level, str, ...) \ | |
| do { \ | |
| debug_sprintf_event(TAPE_DBF_AREA, level, str, ## __VA_ARGS__); \ | |
| } while (0) | |
| #else | |
| #define DBF_LH(level, str, ...) do {} while(0) | |
| #endif | |
| /* | |
| * macros s390 debug feature (dbf) | |
| */ | |
| #define DBF_EVENT(d_level, d_str...) \ | |
| do { \ | |
| debug_sprintf_event(TAPE_DBF_AREA, d_level, d_str); \ | |
| } while (0) | |
| #define DBF_EXCEPTION(d_level, d_str...) \ | |
| do { \ | |
| debug_sprintf_exception(TAPE_DBF_AREA, d_level, d_str); \ | |
| } while (0) | |
| #define TAPE_VERSION_MAJOR 2 | |
| #define TAPE_VERSION_MINOR 0 | |
| #define TAPE_MAGIC "tape" | |
| #define TAPE_MINORS_PER_DEV 2 /* two minors per device */ | |
| #define TAPEBLOCK_HSEC_SIZE 2048 | |
| #define TAPEBLOCK_HSEC_S2B 2 | |
| #define TAPEBLOCK_RETRIES 5 | |
| enum tape_medium_state { | |
| MS_UNKNOWN, | |
| MS_LOADED, | |
| MS_UNLOADED, | |
| MS_SIZE | |
| }; | |
| enum tape_state { | |
| TS_UNUSED=0, | |
| TS_IN_USE, | |
| TS_BLKUSE, | |
| TS_INIT, | |
| TS_NOT_OPER, | |
| TS_SIZE | |
| }; | |
| enum tape_op { | |
| TO_BLOCK, /* Block read */ | |
| TO_BSB, /* Backward space block */ | |
| TO_BSF, /* Backward space filemark */ | |
| TO_DSE, /* Data security erase */ | |
| TO_FSB, /* Forward space block */ | |
| TO_FSF, /* Forward space filemark */ | |
| TO_LBL, /* Locate block label */ | |
| TO_NOP, /* No operation */ | |
| TO_RBA, /* Read backward */ | |
| TO_RBI, /* Read block information */ | |
| TO_RFO, /* Read forward */ | |
| TO_REW, /* Rewind tape */ | |
| TO_RUN, /* Rewind and unload tape */ | |
| TO_WRI, /* Write block */ | |
| TO_WTM, /* Write tape mark */ | |
| TO_MSEN, /* Medium sense */ | |
| TO_LOAD, /* Load tape */ | |
| TO_READ_CONFIG, /* Read configuration data */ | |
| TO_READ_ATTMSG, /* Read attention message */ | |
| TO_DIS, /* Tape display */ | |
| TO_ASSIGN, /* Assign tape to channel path */ | |
| TO_UNASSIGN, /* Unassign tape from channel path */ | |
| TO_CRYPT_ON, /* Enable encrpytion */ | |
| TO_CRYPT_OFF, /* Disable encrpytion */ | |
| TO_KEKL_SET, /* Set KEK label */ | |
| TO_KEKL_QUERY, /* Query KEK label */ | |
| TO_RDC, /* Read device characteristics */ | |
| TO_SIZE, /* #entries in tape_op_t */ | |
| }; | |
| /* Forward declaration */ | |
| struct tape_device; | |
| /* tape_request->status can be: */ | |
| enum tape_request_status { | |
| TAPE_REQUEST_INIT, /* request is ready to be processed */ | |
| TAPE_REQUEST_QUEUED, /* request is queued to be processed */ | |
| TAPE_REQUEST_IN_IO, /* request is currently in IO */ | |
| TAPE_REQUEST_DONE, /* request is completed. */ | |
| TAPE_REQUEST_CANCEL, /* request should be canceled. */ | |
| TAPE_REQUEST_LONG_BUSY, /* request has to be restarted after long busy */ | |
| }; | |
| /* Tape CCW request */ | |
| struct tape_request { | |
| struct list_head list; /* list head for request queueing. */ | |
| struct tape_device *device; /* tape device of this request */ | |
| struct ccw1 *cpaddr; /* address of the channel program. */ | |
| void *cpdata; /* pointer to ccw data. */ | |
| enum tape_request_status status;/* status of this request */ | |
| int options; /* options for execution. */ | |
| int retries; /* retry counter for error recovery. */ | |
| int rescnt; /* residual count from devstat. */ | |
| /* Callback for delivering final status. */ | |
| void (*callback)(struct tape_request *, void *); | |
| void *callback_data; | |
| enum tape_op op; | |
| int rc; | |
| }; | |
| /* Function type for magnetic tape commands */ | |
| typedef int (*tape_mtop_fn)(struct tape_device *, int); | |
| /* Size of the array containing the mtops for a discipline */ | |
| #define TAPE_NR_MTOPS (MTMKPART+1) | |
| /* Tape Discipline */ | |
| struct tape_discipline { | |
| struct module *owner; | |
| int (*setup_device)(struct tape_device *); | |
| void (*cleanup_device)(struct tape_device *); | |
| int (*irq)(struct tape_device *, struct tape_request *, struct irb *); | |
| struct tape_request *(*read_block)(struct tape_device *, size_t); | |
| struct tape_request *(*write_block)(struct tape_device *, size_t); | |
| void (*process_eov)(struct tape_device*); | |
| /* ioctl function for additional ioctls. */ | |
| int (*ioctl_fn)(struct tape_device *, unsigned int, unsigned long); | |
| /* Array of tape commands with TAPE_NR_MTOPS entries */ | |
| tape_mtop_fn *mtop_array; | |
| }; | |
| /* | |
| * The discipline irq function either returns an error code (<0) which | |
| * means that the request has failed with an error or one of the following: | |
| */ | |
| #define TAPE_IO_SUCCESS 0 /* request successful */ | |
| #define TAPE_IO_PENDING 1 /* request still running */ | |
| #define TAPE_IO_RETRY 2 /* retry to current request */ | |
| #define TAPE_IO_STOP 3 /* stop the running request */ | |
| #define TAPE_IO_LONG_BUSY 4 /* delay the running request */ | |
| /* Char Frontend Data */ | |
| struct tape_char_data { | |
| struct idal_buffer *idal_buf; /* idal buffer for user char data */ | |
| int block_size; /* of size block_size. */ | |
| }; | |
| /* Tape Info */ | |
| struct tape_device { | |
| /* entry in tape_device_list */ | |
| struct list_head node; | |
| int cdev_id; | |
| struct ccw_device * cdev; | |
| struct tape_class_device * nt; | |
| struct tape_class_device * rt; | |
| /* Device mutex to serialize tape commands. */ | |
| struct mutex mutex; | |
| /* Device discipline information. */ | |
| struct tape_discipline * discipline; | |
| void * discdata; | |
| /* Generic status flags */ | |
| long tape_generic_status; | |
| /* Device state information. */ | |
| wait_queue_head_t state_change_wq; | |
| enum tape_state tape_state; | |
| enum tape_medium_state medium_state; | |
| unsigned char * modeset_byte; | |
| /* Reference count. */ | |
| atomic_t ref_count; | |
| /* Request queue. */ | |
| struct list_head req_queue; | |
| /* Request wait queue. */ | |
| wait_queue_head_t wait_queue; | |
| /* Each tape device has (currently) two minor numbers. */ | |
| int first_minor; | |
| /* Number of tapemarks required for correct termination. */ | |
| int required_tapemarks; | |
| /* Block ID of the BOF */ | |
| unsigned int bof; | |
| /* Character device frontend data */ | |
| struct tape_char_data char_data; | |
| /* Function to start or stop the next request later. */ | |
| struct delayed_work tape_dnr; | |
| /* Timer for long busy */ | |
| struct timer_list lb_timeout; | |
| }; | |
| /* Externals from tape_core.c */ | |
| extern struct tape_request *tape_alloc_request(int cplength, int datasize); | |
| extern void tape_free_request(struct tape_request *); | |
| extern int tape_do_io(struct tape_device *, struct tape_request *); | |
| extern int tape_do_io_async(struct tape_device *, struct tape_request *); | |
| extern int tape_do_io_interruptible(struct tape_device *, struct tape_request *); | |
| extern int tape_cancel_io(struct tape_device *, struct tape_request *); | |
| void tape_hotplug_event(struct tape_device *, int major, int action); | |
| static inline int | |
| tape_do_io_free(struct tape_device *device, struct tape_request *request) | |
| { | |
| int rc; | |
| rc = tape_do_io(device, request); | |
| tape_free_request(request); | |
| return rc; | |
| } | |
| static inline void | |
| tape_do_io_async_free(struct tape_device *device, struct tape_request *request) | |
| { | |
| request->callback = (void *) tape_free_request; | |
| request->callback_data = NULL; | |
| tape_do_io_async(device, request); | |
| } | |
| extern int tape_oper_handler(int irq, int status); | |
| extern void tape_noper_handler(int irq, int status); | |
| extern int tape_open(struct tape_device *); | |
| extern int tape_release(struct tape_device *); | |
| extern int tape_mtop(struct tape_device *, int, int); | |
| extern void tape_state_set(struct tape_device *, enum tape_state); | |
| extern int tape_generic_online(struct tape_device *, struct tape_discipline *); | |
| extern int tape_generic_offline(struct ccw_device *); | |
| extern int tape_generic_pm_suspend(struct ccw_device *); | |
| /* Externals from tape_devmap.c */ | |
| extern int tape_generic_probe(struct ccw_device *); | |
| extern void tape_generic_remove(struct ccw_device *); | |
| extern struct tape_device *tape_find_device(int devindex); | |
| extern struct tape_device *tape_get_device(struct tape_device *); | |
| extern void tape_put_device(struct tape_device *); | |
| /* Externals from tape_char.c */ | |
| extern int tapechar_init(void); | |
| extern void tapechar_exit(void); | |
| extern int tapechar_setup_device(struct tape_device *); | |
| extern void tapechar_cleanup_device(struct tape_device *); | |
| /* tape initialisation functions */ | |
| #ifdef CONFIG_PROC_FS | |
| extern void tape_proc_init (void); | |
| extern void tape_proc_cleanup (void); | |
| #else | |
| static inline void tape_proc_init (void) {;} | |
| static inline void tape_proc_cleanup (void) {;} | |
| #endif | |
| /* a function for dumping device sense info */ | |
| extern void tape_dump_sense_dbf(struct tape_device *, struct tape_request *, | |
| struct irb *); | |
| /* functions for handling the status of a device */ | |
| extern void tape_med_state_set(struct tape_device *, enum tape_medium_state); | |
| /* The debug area */ | |
| extern debug_info_t *TAPE_DBF_AREA; | |
| /* functions for building ccws */ | |
| static inline struct ccw1 * | |
| tape_ccw_cc(struct ccw1 *ccw, __u8 cmd_code, __u16 memsize, void *cda) | |
| { | |
| ccw->cmd_code = cmd_code; | |
| ccw->flags = CCW_FLAG_CC; | |
| ccw->count = memsize; | |
| ccw->cda = (__u32)(addr_t) cda; | |
| return ccw + 1; | |
| } | |
| static inline struct ccw1 * | |
| tape_ccw_end(struct ccw1 *ccw, __u8 cmd_code, __u16 memsize, void *cda) | |
| { | |
| ccw->cmd_code = cmd_code; | |
| ccw->flags = 0; | |
| ccw->count = memsize; | |
| ccw->cda = (__u32)(addr_t) cda; | |
| return ccw + 1; | |
| } | |
| static inline struct ccw1 * | |
| tape_ccw_cmd(struct ccw1 *ccw, __u8 cmd_code) | |
| { | |
| ccw->cmd_code = cmd_code; | |
| ccw->flags = 0; | |
| ccw->count = 0; | |
| ccw->cda = (__u32)(addr_t) &ccw->cmd_code; | |
| return ccw + 1; | |
| } | |
| static inline struct ccw1 * | |
| tape_ccw_repeat(struct ccw1 *ccw, __u8 cmd_code, int count) | |
| { | |
| while (count-- > 0) { | |
| ccw->cmd_code = cmd_code; | |
| ccw->flags = CCW_FLAG_CC; | |
| ccw->count = 0; | |
| ccw->cda = (__u32)(addr_t) &ccw->cmd_code; | |
| ccw++; | |
| } | |
| return ccw; | |
| } | |
| static inline struct ccw1 * | |
| tape_ccw_cc_idal(struct ccw1 *ccw, __u8 cmd_code, struct idal_buffer *idal) | |
| { | |
| ccw->cmd_code = cmd_code; | |
| ccw->flags = CCW_FLAG_CC; | |
| idal_buffer_set_cda(idal, ccw); | |
| return ccw++; | |
| } | |
| static inline struct ccw1 * | |
| tape_ccw_end_idal(struct ccw1 *ccw, __u8 cmd_code, struct idal_buffer *idal) | |
| { | |
| ccw->cmd_code = cmd_code; | |
| ccw->flags = 0; | |
| idal_buffer_set_cda(idal, ccw); | |
| return ccw++; | |
| } | |
| /* Global vars */ | |
| extern const char *tape_state_verbose[]; | |
| extern const char *tape_op_verbose[]; | |
| #endif /* for ifdef tape.h */ |