| /* | |
| * tape device discipline for 3590 tapes. | |
| * | |
| * Copyright IBM Corp. 2001, 2009 | |
| * Author(s): Stefan Bader <shbader@de.ibm.com> | |
| * Michael Holzheu <holzheu@de.ibm.com> | |
| * Martin Schwidefsky <schwidefsky@de.ibm.com> | |
| */ | |
| #define KMSG_COMPONENT "tape_3590" | |
| #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt | |
| #include <linux/module.h> | |
| #include <linux/slab.h> | |
| #include <linux/init.h> | |
| #include <linux/bio.h> | |
| #include <asm/ebcdic.h> | |
| #define TAPE_DBF_AREA tape_3590_dbf | |
| #define BUFSIZE 512 /* size of buffers for dynamic generated messages */ | |
| #include "tape.h" | |
| #include "tape_std.h" | |
| #include "tape_3590.h" | |
| static struct workqueue_struct *tape_3590_wq; | |
| /* | |
| * Pointer to debug area. | |
| */ | |
| debug_info_t *TAPE_DBF_AREA = NULL; | |
| EXPORT_SYMBOL(TAPE_DBF_AREA); | |
| /******************************************************************* | |
| * Error Recovery functions: | |
| * - Read Opposite: implemented | |
| * - Read Device (buffered) log: BRA | |
| * - Read Library log: BRA | |
| * - Swap Devices: BRA | |
| * - Long Busy: implemented | |
| * - Special Intercept: BRA | |
| * - Read Alternate: implemented | |
| *******************************************************************/ | |
| static const char *tape_3590_msg[TAPE_3590_MAX_MSG] = { | |
| [0x00] = "", | |
| [0x10] = "Lost Sense", | |
| [0x11] = "Assigned Elsewhere", | |
| [0x12] = "Allegiance Reset", | |
| [0x13] = "Shared Access Violation", | |
| [0x20] = "Command Reject", | |
| [0x21] = "Configuration Error", | |
| [0x22] = "Protection Exception", | |
| [0x23] = "Write Protect", | |
| [0x24] = "Write Length", | |
| [0x25] = "Read-Only Format", | |
| [0x31] = "Beginning of Partition", | |
| [0x33] = "End of Partition", | |
| [0x34] = "End of Data", | |
| [0x35] = "Block not found", | |
| [0x40] = "Device Intervention", | |
| [0x41] = "Loader Intervention", | |
| [0x42] = "Library Intervention", | |
| [0x50] = "Write Error", | |
| [0x51] = "Erase Error", | |
| [0x52] = "Formatting Error", | |
| [0x53] = "Read Error", | |
| [0x54] = "Unsupported Format", | |
| [0x55] = "No Formatting", | |
| [0x56] = "Positioning lost", | |
| [0x57] = "Read Length", | |
| [0x60] = "Unsupported Medium", | |
| [0x61] = "Medium Length Error", | |
| [0x62] = "Medium removed", | |
| [0x64] = "Load Check", | |
| [0x65] = "Unload Check", | |
| [0x70] = "Equipment Check", | |
| [0x71] = "Bus out Check", | |
| [0x72] = "Protocol Error", | |
| [0x73] = "Interface Error", | |
| [0x74] = "Overrun", | |
| [0x75] = "Halt Signal", | |
| [0x90] = "Device fenced", | |
| [0x91] = "Device Path fenced", | |
| [0xa0] = "Volume misplaced", | |
| [0xa1] = "Volume inaccessible", | |
| [0xa2] = "Volume in input", | |
| [0xa3] = "Volume ejected", | |
| [0xa4] = "All categories reserved", | |
| [0xa5] = "Duplicate Volume", | |
| [0xa6] = "Library Manager Offline", | |
| [0xa7] = "Library Output Station full", | |
| [0xa8] = "Vision System non-operational", | |
| [0xa9] = "Library Manager Equipment Check", | |
| [0xaa] = "Library Equipment Check", | |
| [0xab] = "All Library Cells full", | |
| [0xac] = "No Cleaner Volumes in Library", | |
| [0xad] = "I/O Station door open", | |
| [0xae] = "Subsystem environmental alert", | |
| }; | |
| static int crypt_supported(struct tape_device *device) | |
| { | |
| return TAPE390_CRYPT_SUPPORTED(TAPE_3590_CRYPT_INFO(device)); | |
| } | |
| static int crypt_enabled(struct tape_device *device) | |
| { | |
| return TAPE390_CRYPT_ON(TAPE_3590_CRYPT_INFO(device)); | |
| } | |
| static void ext_to_int_kekl(struct tape390_kekl *in, | |
| struct tape3592_kekl *out) | |
| { | |
| int i; | |
| memset(out, 0, sizeof(*out)); | |
| if (in->type == TAPE390_KEKL_TYPE_HASH) | |
| out->flags |= 0x40; | |
| if (in->type_on_tape == TAPE390_KEKL_TYPE_HASH) | |
| out->flags |= 0x80; | |
| strncpy(out->label, in->label, 64); | |
| for (i = strlen(in->label); i < sizeof(out->label); i++) | |
| out->label[i] = ' '; | |
| ASCEBC(out->label, sizeof(out->label)); | |
| } | |
| static void int_to_ext_kekl(struct tape3592_kekl *in, | |
| struct tape390_kekl *out) | |
| { | |
| memset(out, 0, sizeof(*out)); | |
| if(in->flags & 0x40) | |
| out->type = TAPE390_KEKL_TYPE_HASH; | |
| else | |
| out->type = TAPE390_KEKL_TYPE_LABEL; | |
| if(in->flags & 0x80) | |
| out->type_on_tape = TAPE390_KEKL_TYPE_HASH; | |
| else | |
| out->type_on_tape = TAPE390_KEKL_TYPE_LABEL; | |
| memcpy(out->label, in->label, sizeof(in->label)); | |
| EBCASC(out->label, sizeof(in->label)); | |
| strim(out->label); | |
| } | |
| static void int_to_ext_kekl_pair(struct tape3592_kekl_pair *in, | |
| struct tape390_kekl_pair *out) | |
| { | |
| if (in->count == 0) { | |
| out->kekl[0].type = TAPE390_KEKL_TYPE_NONE; | |
| out->kekl[0].type_on_tape = TAPE390_KEKL_TYPE_NONE; | |
| out->kekl[1].type = TAPE390_KEKL_TYPE_NONE; | |
| out->kekl[1].type_on_tape = TAPE390_KEKL_TYPE_NONE; | |
| } else if (in->count == 1) { | |
| int_to_ext_kekl(&in->kekl[0], &out->kekl[0]); | |
| out->kekl[1].type = TAPE390_KEKL_TYPE_NONE; | |
| out->kekl[1].type_on_tape = TAPE390_KEKL_TYPE_NONE; | |
| } else if (in->count == 2) { | |
| int_to_ext_kekl(&in->kekl[0], &out->kekl[0]); | |
| int_to_ext_kekl(&in->kekl[1], &out->kekl[1]); | |
| } else { | |
| printk("Invalid KEKL number: %d\n", in->count); | |
| BUG(); | |
| } | |
| } | |
| static int check_ext_kekl(struct tape390_kekl *kekl) | |
| { | |
| if (kekl->type == TAPE390_KEKL_TYPE_NONE) | |
| goto invalid; | |
| if (kekl->type > TAPE390_KEKL_TYPE_HASH) | |
| goto invalid; | |
| if (kekl->type_on_tape == TAPE390_KEKL_TYPE_NONE) | |
| goto invalid; | |
| if (kekl->type_on_tape > TAPE390_KEKL_TYPE_HASH) | |
| goto invalid; | |
| if ((kekl->type == TAPE390_KEKL_TYPE_HASH) && | |
| (kekl->type_on_tape == TAPE390_KEKL_TYPE_LABEL)) | |
| goto invalid; | |
| return 0; | |
| invalid: | |
| return -EINVAL; | |
| } | |
| static int check_ext_kekl_pair(struct tape390_kekl_pair *kekls) | |
| { | |
| if (check_ext_kekl(&kekls->kekl[0])) | |
| goto invalid; | |
| if (check_ext_kekl(&kekls->kekl[1])) | |
| goto invalid; | |
| return 0; | |
| invalid: | |
| return -EINVAL; | |
| } | |
| /* | |
| * Query KEKLs | |
| */ | |
| static int tape_3592_kekl_query(struct tape_device *device, | |
| struct tape390_kekl_pair *ext_kekls) | |
| { | |
| struct tape_request *request; | |
| struct tape3592_kekl_query_order *order; | |
| struct tape3592_kekl_query_data *int_kekls; | |
| int rc; | |
| DBF_EVENT(6, "tape3592_kekl_query\n"); | |
| int_kekls = kmalloc(sizeof(*int_kekls), GFP_KERNEL|GFP_DMA); | |
| if (!int_kekls) | |
| return -ENOMEM; | |
| request = tape_alloc_request(2, sizeof(*order)); | |
| if (IS_ERR(request)) { | |
| rc = PTR_ERR(request); | |
| goto fail_malloc; | |
| } | |
| order = request->cpdata; | |
| memset(order,0,sizeof(*order)); | |
| order->code = 0xe2; | |
| order->max_count = 2; | |
| request->op = TO_KEKL_QUERY; | |
| tape_ccw_cc(request->cpaddr, PERF_SUBSYS_FUNC, sizeof(*order), order); | |
| tape_ccw_end(request->cpaddr + 1, READ_SS_DATA, sizeof(*int_kekls), | |
| int_kekls); | |
| rc = tape_do_io(device, request); | |
| if (rc) | |
| goto fail_request; | |
| int_to_ext_kekl_pair(&int_kekls->kekls, ext_kekls); | |
| rc = 0; | |
| fail_request: | |
| tape_free_request(request); | |
| fail_malloc: | |
| kfree(int_kekls); | |
| return rc; | |
| } | |
| /* | |
| * IOCTL: Query KEKLs | |
| */ | |
| static int tape_3592_ioctl_kekl_query(struct tape_device *device, | |
| unsigned long arg) | |
| { | |
| int rc; | |
| struct tape390_kekl_pair *ext_kekls; | |
| DBF_EVENT(6, "tape_3592_ioctl_kekl_query\n"); | |
| if (!crypt_supported(device)) | |
| return -ENOSYS; | |
| if (!crypt_enabled(device)) | |
| return -EUNATCH; | |
| ext_kekls = kmalloc(sizeof(*ext_kekls), GFP_KERNEL); | |
| if (!ext_kekls) | |
| return -ENOMEM; | |
| rc = tape_3592_kekl_query(device, ext_kekls); | |
| if (rc != 0) | |
| goto fail; | |
| if (copy_to_user((char __user *) arg, ext_kekls, sizeof(*ext_kekls))) { | |
| rc = -EFAULT; | |
| goto fail; | |
| } | |
| rc = 0; | |
| fail: | |
| kfree(ext_kekls); | |
| return rc; | |
| } | |
| static int tape_3590_mttell(struct tape_device *device, int mt_count); | |
| /* | |
| * Set KEKLs | |
| */ | |
| static int tape_3592_kekl_set(struct tape_device *device, | |
| struct tape390_kekl_pair *ext_kekls) | |
| { | |
| struct tape_request *request; | |
| struct tape3592_kekl_set_order *order; | |
| DBF_EVENT(6, "tape3592_kekl_set\n"); | |
| if (check_ext_kekl_pair(ext_kekls)) { | |
| DBF_EVENT(6, "invalid kekls\n"); | |
| return -EINVAL; | |
| } | |
| if (tape_3590_mttell(device, 0) != 0) | |
| return -EBADSLT; | |
| request = tape_alloc_request(1, sizeof(*order)); | |
| if (IS_ERR(request)) | |
| return PTR_ERR(request); | |
| order = request->cpdata; | |
| memset(order, 0, sizeof(*order)); | |
| order->code = 0xe3; | |
| order->kekls.count = 2; | |
| ext_to_int_kekl(&ext_kekls->kekl[0], &order->kekls.kekl[0]); | |
| ext_to_int_kekl(&ext_kekls->kekl[1], &order->kekls.kekl[1]); | |
| request->op = TO_KEKL_SET; | |
| tape_ccw_end(request->cpaddr, PERF_SUBSYS_FUNC, sizeof(*order), order); | |
| return tape_do_io_free(device, request); | |
| } | |
| /* | |
| * IOCTL: Set KEKLs | |
| */ | |
| static int tape_3592_ioctl_kekl_set(struct tape_device *device, | |
| unsigned long arg) | |
| { | |
| int rc; | |
| struct tape390_kekl_pair *ext_kekls; | |
| DBF_EVENT(6, "tape_3592_ioctl_kekl_set\n"); | |
| if (!crypt_supported(device)) | |
| return -ENOSYS; | |
| if (!crypt_enabled(device)) | |
| return -EUNATCH; | |
| ext_kekls = memdup_user((char __user *)arg, sizeof(*ext_kekls)); | |
| if (IS_ERR(ext_kekls)) | |
| return PTR_ERR(ext_kekls); | |
| rc = tape_3592_kekl_set(device, ext_kekls); | |
| kfree(ext_kekls); | |
| return rc; | |
| } | |
| /* | |
| * Enable encryption | |
| */ | |
| static struct tape_request *__tape_3592_enable_crypt(struct tape_device *device) | |
| { | |
| struct tape_request *request; | |
| char *data; | |
| DBF_EVENT(6, "tape_3592_enable_crypt\n"); | |
| if (!crypt_supported(device)) | |
| return ERR_PTR(-ENOSYS); | |
| request = tape_alloc_request(2, 72); | |
| if (IS_ERR(request)) | |
| return request; | |
| data = request->cpdata; | |
| memset(data,0,72); | |
| data[0] = 0x05; | |
| data[36 + 0] = 0x03; | |
| data[36 + 1] = 0x03; | |
| data[36 + 4] = 0x40; | |
| data[36 + 6] = 0x01; | |
| data[36 + 14] = 0x2f; | |
| data[36 + 18] = 0xc3; | |
| data[36 + 35] = 0x72; | |
| request->op = TO_CRYPT_ON; | |
| tape_ccw_cc(request->cpaddr, MODE_SET_CB, 36, data); | |
| tape_ccw_end(request->cpaddr + 1, MODE_SET_CB, 36, data + 36); | |
| return request; | |
| } | |
| static int tape_3592_enable_crypt(struct tape_device *device) | |
| { | |
| struct tape_request *request; | |
| request = __tape_3592_enable_crypt(device); | |
| if (IS_ERR(request)) | |
| return PTR_ERR(request); | |
| return tape_do_io_free(device, request); | |
| } | |
| static void tape_3592_enable_crypt_async(struct tape_device *device) | |
| { | |
| struct tape_request *request; | |
| request = __tape_3592_enable_crypt(device); | |
| if (!IS_ERR(request)) | |
| tape_do_io_async_free(device, request); | |
| } | |
| /* | |
| * Disable encryption | |
| */ | |
| static struct tape_request *__tape_3592_disable_crypt(struct tape_device *device) | |
| { | |
| struct tape_request *request; | |
| char *data; | |
| DBF_EVENT(6, "tape_3592_disable_crypt\n"); | |
| if (!crypt_supported(device)) | |
| return ERR_PTR(-ENOSYS); | |
| request = tape_alloc_request(2, 72); | |
| if (IS_ERR(request)) | |
| return request; | |
| data = request->cpdata; | |
| memset(data,0,72); | |
| data[0] = 0x05; | |
| data[36 + 0] = 0x03; | |
| data[36 + 1] = 0x03; | |
| data[36 + 35] = 0x32; | |
| request->op = TO_CRYPT_OFF; | |
| tape_ccw_cc(request->cpaddr, MODE_SET_CB, 36, data); | |
| tape_ccw_end(request->cpaddr + 1, MODE_SET_CB, 36, data + 36); | |
| return request; | |
| } | |
| static int tape_3592_disable_crypt(struct tape_device *device) | |
| { | |
| struct tape_request *request; | |
| request = __tape_3592_disable_crypt(device); | |
| if (IS_ERR(request)) | |
| return PTR_ERR(request); | |
| return tape_do_io_free(device, request); | |
| } | |
| static void tape_3592_disable_crypt_async(struct tape_device *device) | |
| { | |
| struct tape_request *request; | |
| request = __tape_3592_disable_crypt(device); | |
| if (!IS_ERR(request)) | |
| tape_do_io_async_free(device, request); | |
| } | |
| /* | |
| * IOCTL: Set encryption status | |
| */ | |
| static int tape_3592_ioctl_crypt_set(struct tape_device *device, | |
| unsigned long arg) | |
| { | |
| struct tape390_crypt_info info; | |
| DBF_EVENT(6, "tape_3592_ioctl_crypt_set\n"); | |
| if (!crypt_supported(device)) | |
| return -ENOSYS; | |
| if (copy_from_user(&info, (char __user *)arg, sizeof(info))) | |
| return -EFAULT; | |
| if (info.status & ~TAPE390_CRYPT_ON_MASK) | |
| return -EINVAL; | |
| if (info.status & TAPE390_CRYPT_ON_MASK) | |
| return tape_3592_enable_crypt(device); | |
| else | |
| return tape_3592_disable_crypt(device); | |
| } | |
| static int tape_3590_sense_medium(struct tape_device *device); | |
| /* | |
| * IOCTL: Query enryption status | |
| */ | |
| static int tape_3592_ioctl_crypt_query(struct tape_device *device, | |
| unsigned long arg) | |
| { | |
| DBF_EVENT(6, "tape_3592_ioctl_crypt_query\n"); | |
| if (!crypt_supported(device)) | |
| return -ENOSYS; | |
| tape_3590_sense_medium(device); | |
| if (copy_to_user((char __user *) arg, &TAPE_3590_CRYPT_INFO(device), | |
| sizeof(TAPE_3590_CRYPT_INFO(device)))) | |
| return -EFAULT; | |
| else | |
| return 0; | |
| } | |
| /* | |
| * 3590 IOCTL Overload | |
| */ | |
| static int | |
| tape_3590_ioctl(struct tape_device *device, unsigned int cmd, unsigned long arg) | |
| { | |
| switch (cmd) { | |
| case TAPE390_DISPLAY: { | |
| struct display_struct disp; | |
| if (copy_from_user(&disp, (char __user *) arg, sizeof(disp))) | |
| return -EFAULT; | |
| return tape_std_display(device, &disp); | |
| } | |
| case TAPE390_KEKL_SET: | |
| return tape_3592_ioctl_kekl_set(device, arg); | |
| case TAPE390_KEKL_QUERY: | |
| return tape_3592_ioctl_kekl_query(device, arg); | |
| case TAPE390_CRYPT_SET: | |
| return tape_3592_ioctl_crypt_set(device, arg); | |
| case TAPE390_CRYPT_QUERY: | |
| return tape_3592_ioctl_crypt_query(device, arg); | |
| default: | |
| return -EINVAL; /* no additional ioctls */ | |
| } | |
| } | |
| /* | |
| * SENSE Medium: Get Sense data about medium state | |
| */ | |
| static int tape_3590_sense_medium(struct tape_device *device) | |
| { | |
| struct tape_request *request; | |
| request = tape_alloc_request(1, 128); | |
| if (IS_ERR(request)) | |
| return PTR_ERR(request); | |
| request->op = TO_MSEN; | |
| tape_ccw_end(request->cpaddr, MEDIUM_SENSE, 128, request->cpdata); | |
| return tape_do_io_free(device, request); | |
| } | |
| static void tape_3590_sense_medium_async(struct tape_device *device) | |
| { | |
| struct tape_request *request; | |
| request = tape_alloc_request(1, 128); | |
| if (IS_ERR(request)) | |
| return; | |
| request->op = TO_MSEN; | |
| tape_ccw_end(request->cpaddr, MEDIUM_SENSE, 128, request->cpdata); | |
| tape_do_io_async_free(device, request); | |
| } | |
| /* | |
| * MTTELL: Tell block. Return the number of block relative to current file. | |
| */ | |
| static int | |
| tape_3590_mttell(struct tape_device *device, int mt_count) | |
| { | |
| __u64 block_id; | |
| int rc; | |
| rc = tape_std_read_block_id(device, &block_id); | |
| if (rc) | |
| return rc; | |
| return block_id >> 32; | |
| } | |
| /* | |
| * MTSEEK: seek to the specified block. | |
| */ | |
| static int | |
| tape_3590_mtseek(struct tape_device *device, int count) | |
| { | |
| struct tape_request *request; | |
| DBF_EVENT(6, "xsee id: %x\n", count); | |
| request = tape_alloc_request(3, 4); | |
| if (IS_ERR(request)) | |
| return PTR_ERR(request); | |
| request->op = TO_LBL; | |
| tape_ccw_cc(request->cpaddr, MODE_SET_DB, 1, device->modeset_byte); | |
| *(__u32 *) request->cpdata = count; | |
| tape_ccw_cc(request->cpaddr + 1, LOCATE, 4, request->cpdata); | |
| tape_ccw_end(request->cpaddr + 2, NOP, 0, NULL); | |
| return tape_do_io_free(device, request); | |
| } | |
| /* | |
| * Read Opposite Error Recovery Function: | |
| * Used, when Read Forward does not work | |
| */ | |
| static void | |
| tape_3590_read_opposite(struct tape_device *device, | |
| struct tape_request *request) | |
| { | |
| struct tape_3590_disc_data *data; | |
| /* | |
| * We have allocated 4 ccws in tape_std_read, so we can now | |
| * transform the request to a read backward, followed by a | |
| * forward space block. | |
| */ | |
| request->op = TO_RBA; | |
| tape_ccw_cc(request->cpaddr, MODE_SET_DB, 1, device->modeset_byte); | |
| data = device->discdata; | |
| tape_ccw_cc_idal(request->cpaddr + 1, data->read_back_op, | |
| device->char_data.idal_buf); | |
| tape_ccw_cc(request->cpaddr + 2, FORSPACEBLOCK, 0, NULL); | |
| tape_ccw_end(request->cpaddr + 3, NOP, 0, NULL); | |
| DBF_EVENT(6, "xrop ccwg\n"); | |
| } | |
| /* | |
| * Read Attention Msg | |
| * This should be done after an interrupt with attention bit (0x80) | |
| * in device state. | |
| * | |
| * After a "read attention message" request there are two possible | |
| * results: | |
| * | |
| * 1. A unit check is presented, when attention sense is present (e.g. when | |
| * a medium has been unloaded). The attention sense comes then | |
| * together with the unit check. The recovery action is either "retry" | |
| * (in case there is an attention message pending) or "permanent error". | |
| * | |
| * 2. The attention msg is written to the "read subsystem data" buffer. | |
| * In this case we probably should print it to the console. | |
| */ | |
| static void tape_3590_read_attmsg_async(struct tape_device *device) | |
| { | |
| struct tape_request *request; | |
| char *buf; | |
| request = tape_alloc_request(3, 4096); | |
| if (IS_ERR(request)) | |
| return; | |
| request->op = TO_READ_ATTMSG; | |
| buf = request->cpdata; | |
| buf[0] = PREP_RD_SS_DATA; | |
| buf[6] = RD_ATTMSG; /* read att msg */ | |
| tape_ccw_cc(request->cpaddr, PERFORM_SS_FUNC, 12, buf); | |
| tape_ccw_cc(request->cpaddr + 1, READ_SS_DATA, 4096 - 12, buf + 12); | |
| tape_ccw_end(request->cpaddr + 2, NOP, 0, NULL); | |
| tape_do_io_async_free(device, request); | |
| } | |
| /* | |
| * These functions are used to schedule follow-up actions from within an | |
| * interrupt context (like unsolicited interrupts). | |
| * Note: the work handler is called by the system work queue. The tape | |
| * commands started by the handler need to be asynchrounous, otherwise | |
| * a deadlock can occur e.g. in case of a deferred cc=1 (see __tape_do_irq). | |
| */ | |
| struct work_handler_data { | |
| struct tape_device *device; | |
| enum tape_op op; | |
| struct work_struct work; | |
| }; | |
| static void | |
| tape_3590_work_handler(struct work_struct *work) | |
| { | |
| struct work_handler_data *p = | |
| container_of(work, struct work_handler_data, work); | |
| switch (p->op) { | |
| case TO_MSEN: | |
| tape_3590_sense_medium_async(p->device); | |
| break; | |
| case TO_READ_ATTMSG: | |
| tape_3590_read_attmsg_async(p->device); | |
| break; | |
| case TO_CRYPT_ON: | |
| tape_3592_enable_crypt_async(p->device); | |
| break; | |
| case TO_CRYPT_OFF: | |
| tape_3592_disable_crypt_async(p->device); | |
| break; | |
| default: | |
| DBF_EVENT(3, "T3590: work handler undefined for " | |
| "operation 0x%02x\n", p->op); | |
| } | |
| tape_put_device(p->device); | |
| kfree(p); | |
| } | |
| static int | |
| tape_3590_schedule_work(struct tape_device *device, enum tape_op op) | |
| { | |
| struct work_handler_data *p; | |
| if ((p = kzalloc(sizeof(*p), GFP_ATOMIC)) == NULL) | |
| return -ENOMEM; | |
| INIT_WORK(&p->work, tape_3590_work_handler); | |
| p->device = tape_get_device(device); | |
| p->op = op; | |
| queue_work(tape_3590_wq, &p->work); | |
| return 0; | |
| } | |
| static void tape_3590_med_state_set(struct tape_device *device, | |
| struct tape_3590_med_sense *sense) | |
| { | |
| struct tape390_crypt_info *c_info; | |
| c_info = &TAPE_3590_CRYPT_INFO(device); | |
| DBF_EVENT(6, "medium state: %x:%x\n", sense->macst, sense->masst); | |
| switch (sense->macst) { | |
| case 0x04: | |
| case 0x05: | |
| case 0x06: | |
| tape_med_state_set(device, MS_UNLOADED); | |
| TAPE_3590_CRYPT_INFO(device).medium_status = 0; | |
| return; | |
| case 0x08: | |
| case 0x09: | |
| tape_med_state_set(device, MS_LOADED); | |
| break; | |
| default: | |
| tape_med_state_set(device, MS_UNKNOWN); | |
| return; | |
| } | |
| c_info->medium_status |= TAPE390_MEDIUM_LOADED_MASK; | |
| if (sense->flags & MSENSE_CRYPT_MASK) { | |
| DBF_EVENT(6, "Medium is encrypted (%04x)\n", sense->flags); | |
| c_info->medium_status |= TAPE390_MEDIUM_ENCRYPTED_MASK; | |
| } else { | |
| DBF_EVENT(6, "Medium is not encrypted %04x\n", sense->flags); | |
| c_info->medium_status &= ~TAPE390_MEDIUM_ENCRYPTED_MASK; | |
| } | |
| } | |
| /* | |
| * The done handler is called at device/channel end and wakes up the sleeping | |
| * process | |
| */ | |
| static int | |
| tape_3590_done(struct tape_device *device, struct tape_request *request) | |
| { | |
| DBF_EVENT(6, "%s done\n", tape_op_verbose[request->op]); | |
| switch (request->op) { | |
| case TO_BSB: | |
| case TO_BSF: | |
| case TO_DSE: | |
| case TO_FSB: | |
| case TO_FSF: | |
| case TO_LBL: | |
| case TO_RFO: | |
| case TO_RBA: | |
| case TO_REW: | |
| case TO_WRI: | |
| case TO_WTM: | |
| case TO_BLOCK: | |
| case TO_LOAD: | |
| tape_med_state_set(device, MS_LOADED); | |
| break; | |
| case TO_RUN: | |
| tape_med_state_set(device, MS_UNLOADED); | |
| tape_3590_schedule_work(device, TO_CRYPT_OFF); | |
| break; | |
| case TO_MSEN: | |
| tape_3590_med_state_set(device, request->cpdata); | |
| break; | |
| case TO_CRYPT_ON: | |
| TAPE_3590_CRYPT_INFO(device).status | |
| |= TAPE390_CRYPT_ON_MASK; | |
| *(device->modeset_byte) |= 0x03; | |
| break; | |
| case TO_CRYPT_OFF: | |
| TAPE_3590_CRYPT_INFO(device).status | |
| &= ~TAPE390_CRYPT_ON_MASK; | |
| *(device->modeset_byte) &= ~0x03; | |
| break; | |
| case TO_RBI: /* RBI seems to succeed even without medium loaded. */ | |
| case TO_NOP: /* Same to NOP. */ | |
| case TO_READ_CONFIG: | |
| case TO_READ_ATTMSG: | |
| case TO_DIS: | |
| case TO_ASSIGN: | |
| case TO_UNASSIGN: | |
| case TO_SIZE: | |
| case TO_KEKL_SET: | |
| case TO_KEKL_QUERY: | |
| case TO_RDC: | |
| break; | |
| } | |
| return TAPE_IO_SUCCESS; | |
| } | |
| /* | |
| * This function is called, when error recovery was successful | |
| */ | |
| static inline int | |
| tape_3590_erp_succeded(struct tape_device *device, struct tape_request *request) | |
| { | |
| DBF_EVENT(3, "Error Recovery successful for %s\n", | |
| tape_op_verbose[request->op]); | |
| return tape_3590_done(device, request); | |
| } | |
| /* | |
| * This function is called, when error recovery was not successful | |
| */ | |
| static inline int | |
| tape_3590_erp_failed(struct tape_device *device, struct tape_request *request, | |
| struct irb *irb, int rc) | |
| { | |
| DBF_EVENT(3, "Error Recovery failed for %s\n", | |
| tape_op_verbose[request->op]); | |
| tape_dump_sense_dbf(device, request, irb); | |
| return rc; | |
| } | |
| /* | |
| * Error Recovery do retry | |
| */ | |
| static inline int | |
| tape_3590_erp_retry(struct tape_device *device, struct tape_request *request, | |
| struct irb *irb) | |
| { | |
| DBF_EVENT(2, "Retry: %s\n", tape_op_verbose[request->op]); | |
| tape_dump_sense_dbf(device, request, irb); | |
| return TAPE_IO_RETRY; | |
| } | |
| /* | |
| * Handle unsolicited interrupts | |
| */ | |
| static int | |
| tape_3590_unsolicited_irq(struct tape_device *device, struct irb *irb) | |
| { | |
| if (irb->scsw.cmd.dstat == DEV_STAT_CHN_END) | |
| /* Probably result of halt ssch */ | |
| return TAPE_IO_PENDING; | |
| else if (irb->scsw.cmd.dstat == 0x85) | |
| /* Device Ready */ | |
| DBF_EVENT(3, "unsol.irq! tape ready: %08x\n", device->cdev_id); | |
| else if (irb->scsw.cmd.dstat & DEV_STAT_ATTENTION) { | |
| tape_3590_schedule_work(device, TO_READ_ATTMSG); | |
| } else { | |
| DBF_EVENT(3, "unsol.irq! dev end: %08x\n", device->cdev_id); | |
| tape_dump_sense_dbf(device, NULL, irb); | |
| } | |
| /* check medium state */ | |
| tape_3590_schedule_work(device, TO_MSEN); | |
| return TAPE_IO_SUCCESS; | |
| } | |
| /* | |
| * Basic Recovery routine | |
| */ | |
| static int | |
| tape_3590_erp_basic(struct tape_device *device, struct tape_request *request, | |
| struct irb *irb, int rc) | |
| { | |
| struct tape_3590_sense *sense; | |
| sense = (struct tape_3590_sense *) irb->ecw; | |
| switch (sense->bra) { | |
| case SENSE_BRA_PER: | |
| return tape_3590_erp_failed(device, request, irb, rc); | |
| case SENSE_BRA_CONT: | |
| return tape_3590_erp_succeded(device, request); | |
| case SENSE_BRA_RE: | |
| return tape_3590_erp_retry(device, request, irb); | |
| case SENSE_BRA_DRE: | |
| return tape_3590_erp_failed(device, request, irb, rc); | |
| default: | |
| BUG(); | |
| return TAPE_IO_STOP; | |
| } | |
| } | |
| /* | |
| * RDL: Read Device (buffered) log | |
| */ | |
| static int | |
| tape_3590_erp_read_buf_log(struct tape_device *device, | |
| struct tape_request *request, struct irb *irb) | |
| { | |
| /* | |
| * We just do the basic error recovery at the moment (retry). | |
| * Perhaps in the future, we read the log and dump it somewhere... | |
| */ | |
| return tape_3590_erp_basic(device, request, irb, -EIO); | |
| } | |
| /* | |
| * SWAP: Swap Devices | |
| */ | |
| static int | |
| tape_3590_erp_swap(struct tape_device *device, struct tape_request *request, | |
| struct irb *irb) | |
| { | |
| /* | |
| * This error recovery should swap the tapes | |
| * if the original has a problem. The operation | |
| * should proceed with the new tape... this | |
| * should probably be done in user space! | |
| */ | |
| dev_warn (&device->cdev->dev, "The tape medium must be loaded into a " | |
| "different tape unit\n"); | |
| return tape_3590_erp_basic(device, request, irb, -EIO); | |
| } | |
| /* | |
| * LBY: Long Busy | |
| */ | |
| static int | |
| tape_3590_erp_long_busy(struct tape_device *device, | |
| struct tape_request *request, struct irb *irb) | |
| { | |
| DBF_EVENT(6, "Device is busy\n"); | |
| return TAPE_IO_LONG_BUSY; | |
| } | |
| /* | |
| * SPI: Special Intercept | |
| */ | |
| static int | |
| tape_3590_erp_special_interrupt(struct tape_device *device, | |
| struct tape_request *request, struct irb *irb) | |
| { | |
| return tape_3590_erp_basic(device, request, irb, -EIO); | |
| } | |
| /* | |
| * RDA: Read Alternate | |
| */ | |
| static int | |
| tape_3590_erp_read_alternate(struct tape_device *device, | |
| struct tape_request *request, struct irb *irb) | |
| { | |
| struct tape_3590_disc_data *data; | |
| /* | |
| * The issued Read Backward or Read Previous command is not | |
| * supported by the device | |
| * The recovery action should be to issue another command: | |
| * Read Revious: if Read Backward is not supported | |
| * Read Backward: if Read Previous is not supported | |
| */ | |
| data = device->discdata; | |
| if (data->read_back_op == READ_PREVIOUS) { | |
| DBF_EVENT(2, "(%08x): No support for READ_PREVIOUS command\n", | |
| device->cdev_id); | |
| data->read_back_op = READ_BACKWARD; | |
| } else { | |
| DBF_EVENT(2, "(%08x): No support for READ_BACKWARD command\n", | |
| device->cdev_id); | |
| data->read_back_op = READ_PREVIOUS; | |
| } | |
| tape_3590_read_opposite(device, request); | |
| return tape_3590_erp_retry(device, request, irb); | |
| } | |
| /* | |
| * Error Recovery read opposite | |
| */ | |
| static int | |
| tape_3590_erp_read_opposite(struct tape_device *device, | |
| struct tape_request *request, struct irb *irb) | |
| { | |
| switch (request->op) { | |
| case TO_RFO: | |
| /* | |
| * We did read forward, but the data could not be read. | |
| * We will read backward and then skip forward again. | |
| */ | |
| tape_3590_read_opposite(device, request); | |
| return tape_3590_erp_retry(device, request, irb); | |
| case TO_RBA: | |
| /* We tried to read forward and backward, but hat no success */ | |
| return tape_3590_erp_failed(device, request, irb, -EIO); | |
| break; | |
| default: | |
| return tape_3590_erp_failed(device, request, irb, -EIO); | |
| } | |
| } | |
| /* | |
| * Print an MIM (Media Information Message) (message code f0) | |
| */ | |
| static void | |
| tape_3590_print_mim_msg_f0(struct tape_device *device, struct irb *irb) | |
| { | |
| struct tape_3590_sense *sense; | |
| char *exception, *service; | |
| exception = kmalloc(BUFSIZE, GFP_ATOMIC); | |
| service = kmalloc(BUFSIZE, GFP_ATOMIC); | |
| if (!exception || !service) | |
| goto out_nomem; | |
| sense = (struct tape_3590_sense *) irb->ecw; | |
| /* Exception Message */ | |
| switch (sense->fmt.f70.emc) { | |
| case 0x02: | |
| snprintf(exception, BUFSIZE, "Data degraded"); | |
| break; | |
| case 0x03: | |
| snprintf(exception, BUFSIZE, "Data degraded in partion %i", | |
| sense->fmt.f70.mp); | |
| break; | |
| case 0x04: | |
| snprintf(exception, BUFSIZE, "Medium degraded"); | |
| break; | |
| case 0x05: | |
| snprintf(exception, BUFSIZE, "Medium degraded in partition %i", | |
| sense->fmt.f70.mp); | |
| break; | |
| case 0x06: | |
| snprintf(exception, BUFSIZE, "Block 0 Error"); | |
| break; | |
| case 0x07: | |
| snprintf(exception, BUFSIZE, "Medium Exception 0x%02x", | |
| sense->fmt.f70.md); | |
| break; | |
| default: | |
| snprintf(exception, BUFSIZE, "0x%02x", | |
| sense->fmt.f70.emc); | |
| break; | |
| } | |
| /* Service Message */ | |
| switch (sense->fmt.f70.smc) { | |
| case 0x02: | |
| snprintf(service, BUFSIZE, "Reference Media maintenance " | |
| "procedure %i", sense->fmt.f70.md); | |
| break; | |
| default: | |
| snprintf(service, BUFSIZE, "0x%02x", | |
| sense->fmt.f70.smc); | |
| break; | |
| } | |
| dev_warn (&device->cdev->dev, "Tape media information: exception %s, " | |
| "service %s\n", exception, service); | |
| out_nomem: | |
| kfree(exception); | |
| kfree(service); | |
| } | |
| /* | |
| * Print an I/O Subsystem Service Information Message (message code f1) | |
| */ | |
| static void | |
| tape_3590_print_io_sim_msg_f1(struct tape_device *device, struct irb *irb) | |
| { | |
| struct tape_3590_sense *sense; | |
| char *exception, *service; | |
| exception = kmalloc(BUFSIZE, GFP_ATOMIC); | |
| service = kmalloc(BUFSIZE, GFP_ATOMIC); | |
| if (!exception || !service) | |
| goto out_nomem; | |
| sense = (struct tape_3590_sense *) irb->ecw; | |
| /* Exception Message */ | |
| switch (sense->fmt.f71.emc) { | |
| case 0x01: | |
| snprintf(exception, BUFSIZE, "Effect of failure is unknown"); | |
| break; | |
| case 0x02: | |
| snprintf(exception, BUFSIZE, "CU Exception - no performance " | |
| "impact"); | |
| break; | |
| case 0x03: | |
| snprintf(exception, BUFSIZE, "CU Exception on channel " | |
| "interface 0x%02x", sense->fmt.f71.md[0]); | |
| break; | |
| case 0x04: | |
| snprintf(exception, BUFSIZE, "CU Exception on device path " | |
| "0x%02x", sense->fmt.f71.md[0]); | |
| break; | |
| case 0x05: | |
| snprintf(exception, BUFSIZE, "CU Exception on library path " | |
| "0x%02x", sense->fmt.f71.md[0]); | |
| break; | |
| case 0x06: | |
| snprintf(exception, BUFSIZE, "CU Exception on node 0x%02x", | |
| sense->fmt.f71.md[0]); | |
| break; | |
| case 0x07: | |
| snprintf(exception, BUFSIZE, "CU Exception on partition " | |
| "0x%02x", sense->fmt.f71.md[0]); | |
| break; | |
| default: | |
| snprintf(exception, BUFSIZE, "0x%02x", | |
| sense->fmt.f71.emc); | |
| } | |
| /* Service Message */ | |
| switch (sense->fmt.f71.smc) { | |
| case 0x01: | |
| snprintf(service, BUFSIZE, "Repair impact is unknown"); | |
| break; | |
| case 0x02: | |
| snprintf(service, BUFSIZE, "Repair will not impact cu " | |
| "performance"); | |
| break; | |
| case 0x03: | |
| if (sense->fmt.f71.mdf == 0) | |
| snprintf(service, BUFSIZE, "Repair will disable node " | |
| "0x%x on CU", sense->fmt.f71.md[1]); | |
| else | |
| snprintf(service, BUFSIZE, "Repair will disable " | |
| "nodes (0x%x-0x%x) on CU", sense->fmt.f71.md[1], | |
| sense->fmt.f71.md[2]); | |
| break; | |
| case 0x04: | |
| if (sense->fmt.f71.mdf == 0) | |
| snprintf(service, BUFSIZE, "Repair will disable " | |
| "channel path 0x%x on CU", | |
| sense->fmt.f71.md[1]); | |
| else | |
| snprintf(service, BUFSIZE, "Repair will disable channel" | |
| " paths (0x%x-0x%x) on CU", | |
| sense->fmt.f71.md[1], sense->fmt.f71.md[2]); | |
| break; | |
| case 0x05: | |
| if (sense->fmt.f71.mdf == 0) | |
| snprintf(service, BUFSIZE, "Repair will disable device" | |
| " path 0x%x on CU", sense->fmt.f71.md[1]); | |
| else | |
| snprintf(service, BUFSIZE, "Repair will disable device" | |
| " paths (0x%x-0x%x) on CU", | |
| sense->fmt.f71.md[1], sense->fmt.f71.md[2]); | |
| break; | |
| case 0x06: | |
| if (sense->fmt.f71.mdf == 0) | |
| snprintf(service, BUFSIZE, "Repair will disable " | |
| "library path 0x%x on CU", | |
| sense->fmt.f71.md[1]); | |
| else | |
| snprintf(service, BUFSIZE, "Repair will disable " | |
| "library paths (0x%x-0x%x) on CU", | |
| sense->fmt.f71.md[1], sense->fmt.f71.md[2]); | |
| break; | |
| case 0x07: | |
| snprintf(service, BUFSIZE, "Repair will disable access to CU"); | |
| break; | |
| default: | |
| snprintf(service, BUFSIZE, "0x%02x", | |
| sense->fmt.f71.smc); | |
| } | |
| dev_warn (&device->cdev->dev, "I/O subsystem information: exception" | |
| " %s, service %s\n", exception, service); | |
| out_nomem: | |
| kfree(exception); | |
| kfree(service); | |
| } | |
| /* | |
| * Print an Device Subsystem Service Information Message (message code f2) | |
| */ | |
| static void | |
| tape_3590_print_dev_sim_msg_f2(struct tape_device *device, struct irb *irb) | |
| { | |
| struct tape_3590_sense *sense; | |
| char *exception, *service; | |
| exception = kmalloc(BUFSIZE, GFP_ATOMIC); | |
| service = kmalloc(BUFSIZE, GFP_ATOMIC); | |
| if (!exception || !service) | |
| goto out_nomem; | |
| sense = (struct tape_3590_sense *) irb->ecw; | |
| /* Exception Message */ | |
| switch (sense->fmt.f71.emc) { | |
| case 0x01: | |
| snprintf(exception, BUFSIZE, "Effect of failure is unknown"); | |
| break; | |
| case 0x02: | |
| snprintf(exception, BUFSIZE, "DV Exception - no performance" | |
| " impact"); | |
| break; | |
| case 0x03: | |
| snprintf(exception, BUFSIZE, "DV Exception on channel " | |
| "interface 0x%02x", sense->fmt.f71.md[0]); | |
| break; | |
| case 0x04: | |
| snprintf(exception, BUFSIZE, "DV Exception on loader 0x%02x", | |
| sense->fmt.f71.md[0]); | |
| break; | |
| case 0x05: | |
| snprintf(exception, BUFSIZE, "DV Exception on message display" | |
| " 0x%02x", sense->fmt.f71.md[0]); | |
| break; | |
| case 0x06: | |
| snprintf(exception, BUFSIZE, "DV Exception in tape path"); | |
| break; | |
| case 0x07: | |
| snprintf(exception, BUFSIZE, "DV Exception in drive"); | |
| break; | |
| default: | |
| snprintf(exception, BUFSIZE, "0x%02x", | |
| sense->fmt.f71.emc); | |
| } | |
| /* Service Message */ | |
| switch (sense->fmt.f71.smc) { | |
| case 0x01: | |
| snprintf(service, BUFSIZE, "Repair impact is unknown"); | |
| break; | |
| case 0x02: | |
| snprintf(service, BUFSIZE, "Repair will not impact device " | |
| "performance"); | |
| break; | |
| case 0x03: | |
| if (sense->fmt.f71.mdf == 0) | |
| snprintf(service, BUFSIZE, "Repair will disable " | |
| "channel path 0x%x on DV", | |
| sense->fmt.f71.md[1]); | |
| else | |
| snprintf(service, BUFSIZE, "Repair will disable " | |
| "channel path (0x%x-0x%x) on DV", | |
| sense->fmt.f71.md[1], sense->fmt.f71.md[2]); | |
| break; | |
| case 0x04: | |
| if (sense->fmt.f71.mdf == 0) | |
| snprintf(service, BUFSIZE, "Repair will disable " | |
| "interface 0x%x on DV", sense->fmt.f71.md[1]); | |
| else | |
| snprintf(service, BUFSIZE, "Repair will disable " | |
| "interfaces (0x%x-0x%x) on DV", | |
| sense->fmt.f71.md[1], sense->fmt.f71.md[2]); | |
| break; | |
| case 0x05: | |
| if (sense->fmt.f71.mdf == 0) | |
| snprintf(service, BUFSIZE, "Repair will disable loader" | |
| " 0x%x on DV", sense->fmt.f71.md[1]); | |
| else | |
| snprintf(service, BUFSIZE, "Repair will disable loader" | |
| " (0x%x-0x%x) on DV", | |
| sense->fmt.f71.md[1], sense->fmt.f71.md[2]); | |
| break; | |
| case 0x07: | |
| snprintf(service, BUFSIZE, "Repair will disable access to DV"); | |
| break; | |
| case 0x08: | |
| if (sense->fmt.f71.mdf == 0) | |
| snprintf(service, BUFSIZE, "Repair will disable " | |
| "message display 0x%x on DV", | |
| sense->fmt.f71.md[1]); | |
| else | |
| snprintf(service, BUFSIZE, "Repair will disable " | |
| "message displays (0x%x-0x%x) on DV", | |
| sense->fmt.f71.md[1], sense->fmt.f71.md[2]); | |
| break; | |
| case 0x09: | |
| snprintf(service, BUFSIZE, "Clean DV"); | |
| break; | |
| default: | |
| snprintf(service, BUFSIZE, "0x%02x", | |
| sense->fmt.f71.smc); | |
| } | |
| dev_warn (&device->cdev->dev, "Device subsystem information: exception" | |
| " %s, service %s\n", exception, service); | |
| out_nomem: | |
| kfree(exception); | |
| kfree(service); | |
| } | |
| /* | |
| * Print standard ERA Message | |
| */ | |
| static void | |
| tape_3590_print_era_msg(struct tape_device *device, struct irb *irb) | |
| { | |
| struct tape_3590_sense *sense; | |
| sense = (struct tape_3590_sense *) irb->ecw; | |
| if (sense->mc == 0) | |
| return; | |
| if ((sense->mc > 0) && (sense->mc < TAPE_3590_MAX_MSG)) { | |
| if (tape_3590_msg[sense->mc] != NULL) | |
| dev_warn (&device->cdev->dev, "The tape unit has " | |
| "issued sense message %s\n", | |
| tape_3590_msg[sense->mc]); | |
| else | |
| dev_warn (&device->cdev->dev, "The tape unit has " | |
| "issued an unknown sense message code 0x%x\n", | |
| sense->mc); | |
| return; | |
| } | |
| if (sense->mc == 0xf0) { | |
| /* Standard Media Information Message */ | |
| dev_warn (&device->cdev->dev, "MIM SEV=%i, MC=%02x, ES=%x/%x, " | |
| "RC=%02x-%04x-%02x\n", sense->fmt.f70.sev, sense->mc, | |
| sense->fmt.f70.emc, sense->fmt.f70.smc, | |
| sense->fmt.f70.refcode, sense->fmt.f70.mid, | |
| sense->fmt.f70.fid); | |
| tape_3590_print_mim_msg_f0(device, irb); | |
| return; | |
| } | |
| if (sense->mc == 0xf1) { | |
| /* Standard I/O Subsystem Service Information Message */ | |
| dev_warn (&device->cdev->dev, "IOSIM SEV=%i, DEVTYPE=3590/%02x," | |
| " MC=%02x, ES=%x/%x, REF=0x%04x-0x%04x-0x%04x\n", | |
| sense->fmt.f71.sev, device->cdev->id.dev_model, | |
| sense->mc, sense->fmt.f71.emc, sense->fmt.f71.smc, | |
| sense->fmt.f71.refcode1, sense->fmt.f71.refcode2, | |
| sense->fmt.f71.refcode3); | |
| tape_3590_print_io_sim_msg_f1(device, irb); | |
| return; | |
| } | |
| if (sense->mc == 0xf2) { | |
| /* Standard Device Service Information Message */ | |
| dev_warn (&device->cdev->dev, "DEVSIM SEV=%i, DEVTYPE=3590/%02x" | |
| ", MC=%02x, ES=%x/%x, REF=0x%04x-0x%04x-0x%04x\n", | |
| sense->fmt.f71.sev, device->cdev->id.dev_model, | |
| sense->mc, sense->fmt.f71.emc, sense->fmt.f71.smc, | |
| sense->fmt.f71.refcode1, sense->fmt.f71.refcode2, | |
| sense->fmt.f71.refcode3); | |
| tape_3590_print_dev_sim_msg_f2(device, irb); | |
| return; | |
| } | |
| if (sense->mc == 0xf3) { | |
| /* Standard Library Service Information Message */ | |
| return; | |
| } | |
| dev_warn (&device->cdev->dev, "The tape unit has issued an unknown " | |
| "sense message code %x\n", sense->mc); | |
| } | |
| static int tape_3590_crypt_error(struct tape_device *device, | |
| struct tape_request *request, struct irb *irb) | |
| { | |
| u8 cu_rc; | |
| u16 ekm_rc2; | |
| char *sense; | |
| sense = ((struct tape_3590_sense *) irb->ecw)->fmt.data; | |
| cu_rc = sense[0]; | |
| ekm_rc2 = *((u16*) &sense[10]); | |
| if ((cu_rc == 0) && (ekm_rc2 == 0xee31)) | |
| /* key not defined on EKM */ | |
| return tape_3590_erp_basic(device, request, irb, -EKEYREJECTED); | |
| if ((cu_rc == 1) || (cu_rc == 2)) | |
| /* No connection to EKM */ | |
| return tape_3590_erp_basic(device, request, irb, -ENOTCONN); | |
| dev_err (&device->cdev->dev, "The tape unit failed to obtain the " | |
| "encryption key from EKM\n"); | |
| return tape_3590_erp_basic(device, request, irb, -ENOKEY); | |
| } | |
| /* | |
| * 3590 error Recovery routine: | |
| * If possible, it tries to recover from the error. If this is not possible, | |
| * inform the user about the problem. | |
| */ | |
| static int | |
| tape_3590_unit_check(struct tape_device *device, struct tape_request *request, | |
| struct irb *irb) | |
| { | |
| struct tape_3590_sense *sense; | |
| sense = (struct tape_3590_sense *) irb->ecw; | |
| DBF_EVENT(6, "Unit Check: RQC = %x\n", sense->rc_rqc); | |
| /* | |
| * First check all RC-QRCs where we want to do something special | |
| * - "break": basic error recovery is done | |
| * - "goto out:": just print error message if available | |
| */ | |
| switch (sense->rc_rqc) { | |
| case 0x1110: | |
| tape_3590_print_era_msg(device, irb); | |
| return tape_3590_erp_read_buf_log(device, request, irb); | |
| case 0x2011: | |
| tape_3590_print_era_msg(device, irb); | |
| return tape_3590_erp_read_alternate(device, request, irb); | |
| case 0x2230: | |
| case 0x2231: | |
| tape_3590_print_era_msg(device, irb); | |
| return tape_3590_erp_special_interrupt(device, request, irb); | |
| case 0x2240: | |
| return tape_3590_crypt_error(device, request, irb); | |
| case 0x3010: | |
| DBF_EVENT(2, "(%08x): Backward at Beginning of Partition\n", | |
| device->cdev_id); | |
| return tape_3590_erp_basic(device, request, irb, -ENOSPC); | |
| case 0x3012: | |
| DBF_EVENT(2, "(%08x): Forward at End of Partition\n", | |
| device->cdev_id); | |
| return tape_3590_erp_basic(device, request, irb, -ENOSPC); | |
| case 0x3020: | |
| DBF_EVENT(2, "(%08x): End of Data Mark\n", device->cdev_id); | |
| return tape_3590_erp_basic(device, request, irb, -ENOSPC); | |
| case 0x3122: | |
| DBF_EVENT(2, "(%08x): Rewind Unload initiated\n", | |
| device->cdev_id); | |
| return tape_3590_erp_basic(device, request, irb, -EIO); | |
| case 0x3123: | |
| DBF_EVENT(2, "(%08x): Rewind Unload complete\n", | |
| device->cdev_id); | |
| tape_med_state_set(device, MS_UNLOADED); | |
| tape_3590_schedule_work(device, TO_CRYPT_OFF); | |
| return tape_3590_erp_basic(device, request, irb, 0); | |
| case 0x4010: | |
| /* | |
| * print additional msg since default msg | |
| * "device intervention" is not very meaningfull | |
| */ | |
| tape_med_state_set(device, MS_UNLOADED); | |
| tape_3590_schedule_work(device, TO_CRYPT_OFF); | |
| return tape_3590_erp_basic(device, request, irb, -ENOMEDIUM); | |
| case 0x4012: /* Device Long Busy */ | |
| /* XXX: Also use long busy handling here? */ | |
| DBF_EVENT(6, "(%08x): LONG BUSY\n", device->cdev_id); | |
| tape_3590_print_era_msg(device, irb); | |
| return tape_3590_erp_basic(device, request, irb, -EBUSY); | |
| case 0x4014: | |
| DBF_EVENT(6, "(%08x): Crypto LONG BUSY\n", device->cdev_id); | |
| return tape_3590_erp_long_busy(device, request, irb); | |
| case 0x5010: | |
| if (sense->rac == 0xd0) { | |
| /* Swap */ | |
| tape_3590_print_era_msg(device, irb); | |
| return tape_3590_erp_swap(device, request, irb); | |
| } | |
| if (sense->rac == 0x26) { | |
| /* Read Opposite */ | |
| tape_3590_print_era_msg(device, irb); | |
| return tape_3590_erp_read_opposite(device, request, | |
| irb); | |
| } | |
| return tape_3590_erp_basic(device, request, irb, -EIO); | |
| case 0x5020: | |
| case 0x5021: | |
| case 0x5022: | |
| case 0x5040: | |
| case 0x5041: | |
| case 0x5042: | |
| tape_3590_print_era_msg(device, irb); | |
| return tape_3590_erp_swap(device, request, irb); | |
| case 0x5110: | |
| case 0x5111: | |
| return tape_3590_erp_basic(device, request, irb, -EMEDIUMTYPE); | |
| case 0x5120: | |
| case 0x1120: | |
| tape_med_state_set(device, MS_UNLOADED); | |
| tape_3590_schedule_work(device, TO_CRYPT_OFF); | |
| return tape_3590_erp_basic(device, request, irb, -ENOMEDIUM); | |
| case 0x6020: | |
| return tape_3590_erp_basic(device, request, irb, -EMEDIUMTYPE); | |
| case 0x8011: | |
| return tape_3590_erp_basic(device, request, irb, -EPERM); | |
| case 0x8013: | |
| dev_warn (&device->cdev->dev, "A different host has privileged" | |
| " access to the tape unit\n"); | |
| return tape_3590_erp_basic(device, request, irb, -EPERM); | |
| default: | |
| return tape_3590_erp_basic(device, request, irb, -EIO); | |
| } | |
| } | |
| /* | |
| * 3590 interrupt handler: | |
| */ | |
| static int | |
| tape_3590_irq(struct tape_device *device, struct tape_request *request, | |
| struct irb *irb) | |
| { | |
| if (request == NULL) | |
| return tape_3590_unsolicited_irq(device, irb); | |
| if ((irb->scsw.cmd.dstat & DEV_STAT_UNIT_EXCEP) && | |
| (irb->scsw.cmd.dstat & DEV_STAT_DEV_END) && | |
| (request->op == TO_WRI)) { | |
| /* Write at end of volume */ | |
| DBF_EVENT(2, "End of volume\n"); | |
| return tape_3590_erp_failed(device, request, irb, -ENOSPC); | |
| } | |
| if (irb->scsw.cmd.dstat & DEV_STAT_UNIT_CHECK) | |
| return tape_3590_unit_check(device, request, irb); | |
| if (irb->scsw.cmd.dstat & DEV_STAT_DEV_END) { | |
| if (irb->scsw.cmd.dstat == DEV_STAT_UNIT_EXCEP) { | |
| if (request->op == TO_FSB || request->op == TO_BSB) | |
| request->rescnt++; | |
| else | |
| DBF_EVENT(5, "Unit Exception!\n"); | |
| } | |
| return tape_3590_done(device, request); | |
| } | |
| if (irb->scsw.cmd.dstat & DEV_STAT_CHN_END) { | |
| DBF_EVENT(2, "channel end\n"); | |
| return TAPE_IO_PENDING; | |
| } | |
| if (irb->scsw.cmd.dstat & DEV_STAT_ATTENTION) { | |
| DBF_EVENT(2, "Unit Attention when busy..\n"); | |
| return TAPE_IO_PENDING; | |
| } | |
| DBF_EVENT(6, "xunknownirq\n"); | |
| tape_dump_sense_dbf(device, request, irb); | |
| return TAPE_IO_STOP; | |
| } | |
| static int tape_3590_read_dev_chars(struct tape_device *device, | |
| struct tape_3590_rdc_data *rdc_data) | |
| { | |
| int rc; | |
| struct tape_request *request; | |
| request = tape_alloc_request(1, sizeof(*rdc_data)); | |
| if (IS_ERR(request)) | |
| return PTR_ERR(request); | |
| request->op = TO_RDC; | |
| tape_ccw_end(request->cpaddr, CCW_CMD_RDC, sizeof(*rdc_data), | |
| request->cpdata); | |
| rc = tape_do_io(device, request); | |
| if (rc == 0) | |
| memcpy(rdc_data, request->cpdata, sizeof(*rdc_data)); | |
| tape_free_request(request); | |
| return rc; | |
| } | |
| /* | |
| * Setup device function | |
| */ | |
| static int | |
| tape_3590_setup_device(struct tape_device *device) | |
| { | |
| int rc; | |
| struct tape_3590_disc_data *data; | |
| struct tape_3590_rdc_data *rdc_data; | |
| DBF_EVENT(6, "3590 device setup\n"); | |
| data = kzalloc(sizeof(struct tape_3590_disc_data), GFP_KERNEL | GFP_DMA); | |
| if (data == NULL) | |
| return -ENOMEM; | |
| data->read_back_op = READ_PREVIOUS; | |
| device->discdata = data; | |
| rdc_data = kmalloc(sizeof(*rdc_data), GFP_KERNEL | GFP_DMA); | |
| if (!rdc_data) { | |
| rc = -ENOMEM; | |
| goto fail_kmalloc; | |
| } | |
| rc = tape_3590_read_dev_chars(device, rdc_data); | |
| if (rc) { | |
| DBF_LH(3, "Read device characteristics failed!\n"); | |
| goto fail_rdc_data; | |
| } | |
| rc = tape_std_assign(device); | |
| if (rc) | |
| goto fail_rdc_data; | |
| if (rdc_data->data[31] == 0x13) { | |
| data->crypt_info.capability |= TAPE390_CRYPT_SUPPORTED_MASK; | |
| tape_3592_disable_crypt(device); | |
| } else { | |
| DBF_EVENT(6, "Device has NO crypto support\n"); | |
| } | |
| /* Try to find out if medium is loaded */ | |
| rc = tape_3590_sense_medium(device); | |
| if (rc) { | |
| DBF_LH(3, "3590 medium sense returned %d\n", rc); | |
| goto fail_rdc_data; | |
| } | |
| return 0; | |
| fail_rdc_data: | |
| kfree(rdc_data); | |
| fail_kmalloc: | |
| kfree(data); | |
| return rc; | |
| } | |
| /* | |
| * Cleanup device function | |
| */ | |
| static void | |
| tape_3590_cleanup_device(struct tape_device *device) | |
| { | |
| flush_workqueue(tape_3590_wq); | |
| tape_std_unassign(device); | |
| kfree(device->discdata); | |
| device->discdata = NULL; | |
| } | |
| /* | |
| * List of 3590 magnetic tape commands. | |
| */ | |
| static tape_mtop_fn tape_3590_mtop[TAPE_NR_MTOPS] = { | |
| [MTRESET] = tape_std_mtreset, | |
| [MTFSF] = tape_std_mtfsf, | |
| [MTBSF] = tape_std_mtbsf, | |
| [MTFSR] = tape_std_mtfsr, | |
| [MTBSR] = tape_std_mtbsr, | |
| [MTWEOF] = tape_std_mtweof, | |
| [MTREW] = tape_std_mtrew, | |
| [MTOFFL] = tape_std_mtoffl, | |
| [MTNOP] = tape_std_mtnop, | |
| [MTRETEN] = tape_std_mtreten, | |
| [MTBSFM] = tape_std_mtbsfm, | |
| [MTFSFM] = tape_std_mtfsfm, | |
| [MTEOM] = tape_std_mteom, | |
| [MTERASE] = tape_std_mterase, | |
| [MTRAS1] = NULL, | |
| [MTRAS2] = NULL, | |
| [MTRAS3] = NULL, | |
| [MTSETBLK] = tape_std_mtsetblk, | |
| [MTSETDENSITY] = NULL, | |
| [MTSEEK] = tape_3590_mtseek, | |
| [MTTELL] = tape_3590_mttell, | |
| [MTSETDRVBUFFER] = NULL, | |
| [MTFSS] = NULL, | |
| [MTBSS] = NULL, | |
| [MTWSM] = NULL, | |
| [MTLOCK] = NULL, | |
| [MTUNLOCK] = NULL, | |
| [MTLOAD] = tape_std_mtload, | |
| [MTUNLOAD] = tape_std_mtunload, | |
| [MTCOMPRESSION] = tape_std_mtcompression, | |
| [MTSETPART] = NULL, | |
| [MTMKPART] = NULL | |
| }; | |
| /* | |
| * Tape discipline structure for 3590. | |
| */ | |
| static struct tape_discipline tape_discipline_3590 = { | |
| .owner = THIS_MODULE, | |
| .setup_device = tape_3590_setup_device, | |
| .cleanup_device = tape_3590_cleanup_device, | |
| .process_eov = tape_std_process_eov, | |
| .irq = tape_3590_irq, | |
| .read_block = tape_std_read_block, | |
| .write_block = tape_std_write_block, | |
| .ioctl_fn = tape_3590_ioctl, | |
| .mtop_array = tape_3590_mtop | |
| }; | |
| static struct ccw_device_id tape_3590_ids[] = { | |
| {CCW_DEVICE_DEVTYPE(0x3590, 0, 0x3590, 0), .driver_info = tape_3590}, | |
| {CCW_DEVICE_DEVTYPE(0x3592, 0, 0x3592, 0), .driver_info = tape_3592}, | |
| { /* end of list */ } | |
| }; | |
| static int | |
| tape_3590_online(struct ccw_device *cdev) | |
| { | |
| return tape_generic_online(dev_get_drvdata(&cdev->dev), | |
| &tape_discipline_3590); | |
| } | |
| static struct ccw_driver tape_3590_driver = { | |
| .driver = { | |
| .name = "tape_3590", | |
| .owner = THIS_MODULE, | |
| }, | |
| .ids = tape_3590_ids, | |
| .probe = tape_generic_probe, | |
| .remove = tape_generic_remove, | |
| .set_offline = tape_generic_offline, | |
| .set_online = tape_3590_online, | |
| .freeze = tape_generic_pm_suspend, | |
| .int_class = IRQIO_TAP, | |
| }; | |
| /* | |
| * Setup discipline structure. | |
| */ | |
| static int | |
| tape_3590_init(void) | |
| { | |
| int rc; | |
| TAPE_DBF_AREA = debug_register("tape_3590", 2, 2, 4 * sizeof(long)); | |
| debug_register_view(TAPE_DBF_AREA, &debug_sprintf_view); | |
| #ifdef DBF_LIKE_HELL | |
| debug_set_level(TAPE_DBF_AREA, 6); | |
| #endif | |
| DBF_EVENT(3, "3590 init\n"); | |
| tape_3590_wq = alloc_workqueue("tape_3590", 0, 0); | |
| if (!tape_3590_wq) | |
| return -ENOMEM; | |
| /* Register driver for 3590 tapes. */ | |
| rc = ccw_driver_register(&tape_3590_driver); | |
| if (rc) { | |
| destroy_workqueue(tape_3590_wq); | |
| DBF_EVENT(3, "3590 init failed\n"); | |
| } else | |
| DBF_EVENT(3, "3590 registered\n"); | |
| return rc; | |
| } | |
| static void | |
| tape_3590_exit(void) | |
| { | |
| ccw_driver_unregister(&tape_3590_driver); | |
| destroy_workqueue(tape_3590_wq); | |
| debug_unregister(TAPE_DBF_AREA); | |
| } | |
| MODULE_DEVICE_TABLE(ccw, tape_3590_ids); | |
| MODULE_AUTHOR("(C) 2001,2006 IBM Corporation"); | |
| MODULE_DESCRIPTION("Linux on zSeries channel attached 3590 tape device driver"); | |
| MODULE_LICENSE("GPL"); | |
| module_init(tape_3590_init); | |
| module_exit(tape_3590_exit); |