| /* | |
| * drivers/sbus/char/jsflash.c | |
| * | |
| * Copyright (C) 1991, 1992 Linus Torvalds (drivers/char/mem.c) | |
| * Copyright (C) 1997 Eddie C. Dost (drivers/sbus/char/flash.c) | |
| * Copyright (C) 1997-2000 Pavel Machek <pavel@ucw.cz> (drivers/block/nbd.c) | |
| * Copyright (C) 1999-2000 Pete Zaitcev | |
| * | |
| * This driver is used to program OS into a Flash SIMM on | |
| * Krups and Espresso platforms. | |
| * | |
| * TODO: do not allow erase/programming if file systems are mounted. | |
| * TODO: Erase/program both banks of a 8MB SIMM. | |
| * | |
| * It is anticipated that programming an OS Flash will be a routine | |
| * procedure. In the same time it is exceedingly dangerous because | |
| * a user can program its OBP flash with OS image and effectively | |
| * kill the machine. | |
| * | |
| * This driver uses an interface different from Eddie's flash.c | |
| * as a silly safeguard. | |
| * | |
| * XXX The flash.c manipulates page caching characteristics in a certain | |
| * dubious way; also it assumes that remap_pfn_range() can remap | |
| * PCI bus locations, which may be false. ioremap() must be used | |
| * instead. We should discuss this. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/mutex.h> | |
| #include <linux/types.h> | |
| #include <linux/errno.h> | |
| #include <linux/miscdevice.h> | |
| #include <linux/fcntl.h> | |
| #include <linux/poll.h> | |
| #include <linux/init.h> | |
| #include <linux/string.h> | |
| #include <linux/genhd.h> | |
| #include <linux/blkdev.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/io.h> | |
| #include <asm/pcic.h> | |
| #include <asm/oplib.h> | |
| #include <asm/jsflash.h> /* ioctl arguments. <linux/> ?? */ | |
| #define JSFIDSZ (sizeof(struct jsflash_ident_arg)) | |
| #define JSFPRGSZ (sizeof(struct jsflash_program_arg)) | |
| /* | |
| * Our device numbers have no business in system headers. | |
| * The only thing a user knows is the device name /dev/jsflash. | |
| * | |
| * Block devices are laid out like this: | |
| * minor+0 - Bootstrap, for 8MB SIMM 0x20400000[0x800000] | |
| * minor+1 - Filesystem to mount, normally 0x20400400[0x7ffc00] | |
| * minor+2 - Whole flash area for any case... 0x20000000[0x01000000] | |
| * Total 3 minors per flash device. | |
| * | |
| * It is easier to have static size vectors, so we define | |
| * a total minor range JSF_MAX, which must cover all minors. | |
| */ | |
| /* character device */ | |
| #define JSF_MINOR 178 /* 178 is registered with hpa */ | |
| /* block device */ | |
| #define JSF_MAX 3 /* 3 minors wasted total so far. */ | |
| #define JSF_NPART 3 /* 3 minors per flash device */ | |
| #define JSF_PART_BITS 2 /* 2 bits of minors to cover JSF_NPART */ | |
| #define JSF_PART_MASK 0x3 /* 2 bits mask */ | |
| static DEFINE_MUTEX(jsf_mutex); | |
| /* | |
| * Access functions. | |
| * We could ioremap(), but it's easier this way. | |
| */ | |
| static unsigned int jsf_inl(unsigned long addr) | |
| { | |
| unsigned long retval; | |
| __asm__ __volatile__("lda [%1] %2, %0\n\t" : | |
| "=r" (retval) : | |
| "r" (addr), "i" (ASI_M_BYPASS)); | |
| return retval; | |
| } | |
| static void jsf_outl(unsigned long addr, __u32 data) | |
| { | |
| __asm__ __volatile__("sta %0, [%1] %2\n\t" : : | |
| "r" (data), "r" (addr), "i" (ASI_M_BYPASS) : | |
| "memory"); | |
| } | |
| /* | |
| * soft carrier | |
| */ | |
| struct jsfd_part { | |
| unsigned long dbase; | |
| unsigned long dsize; | |
| }; | |
| struct jsflash { | |
| unsigned long base; | |
| unsigned long size; | |
| unsigned long busy; /* In use? */ | |
| struct jsflash_ident_arg id; | |
| /* int mbase; */ /* Minor base, typically zero */ | |
| struct jsfd_part dv[JSF_NPART]; | |
| }; | |
| /* | |
| * We do not map normal memory or obio as a safety precaution. | |
| * But offsets are real, for ease of userland programming. | |
| */ | |
| #define JSF_BASE_TOP 0x30000000 | |
| #define JSF_BASE_ALL 0x20000000 | |
| #define JSF_BASE_JK 0x20400000 | |
| /* | |
| */ | |
| static struct gendisk *jsfd_disk[JSF_MAX]; | |
| /* | |
| * Let's pretend we may have several of these... | |
| */ | |
| static struct jsflash jsf0; | |
| /* | |
| * Wait for AMD to finish its embedded algorithm. | |
| * We use the Toggle bit DQ6 (0x40) because it does not | |
| * depend on the data value as /DATA bit DQ7 does. | |
| * | |
| * XXX Do we need any timeout here? So far it never hanged, beware broken hw. | |
| */ | |
| static void jsf_wait(unsigned long p) { | |
| unsigned int x1, x2; | |
| for (;;) { | |
| x1 = jsf_inl(p); | |
| x2 = jsf_inl(p); | |
| if ((x1 & 0x40404040) == (x2 & 0x40404040)) return; | |
| } | |
| } | |
| /* | |
| * Programming will only work if Flash is clean, | |
| * we leave it to the programmer application. | |
| * | |
| * AMD must be programmed one byte at a time; | |
| * thus, Simple Tech SIMM must be written 4 bytes at a time. | |
| * | |
| * Write waits for the chip to become ready after the write | |
| * was finished. This is done so that application would read | |
| * consistent data after the write is done. | |
| */ | |
| static void jsf_write4(unsigned long fa, u32 data) { | |
| jsf_outl(fa, 0xAAAAAAAA); /* Unlock 1 Write 1 */ | |
| jsf_outl(fa, 0x55555555); /* Unlock 1 Write 2 */ | |
| jsf_outl(fa, 0xA0A0A0A0); /* Byte Program */ | |
| jsf_outl(fa, data); | |
| jsf_wait(fa); | |
| } | |
| /* | |
| */ | |
| static void jsfd_read(char *buf, unsigned long p, size_t togo) { | |
| union byte4 { | |
| char s[4]; | |
| unsigned int n; | |
| } b; | |
| while (togo >= 4) { | |
| togo -= 4; | |
| b.n = jsf_inl(p); | |
| memcpy(buf, b.s, 4); | |
| p += 4; | |
| buf += 4; | |
| } | |
| } | |
| static void jsfd_do_request(struct request_queue *q) | |
| { | |
| struct request *req; | |
| req = blk_fetch_request(q); | |
| while (req) { | |
| struct jsfd_part *jdp = req->rq_disk->private_data; | |
| unsigned long offset = blk_rq_pos(req) << 9; | |
| size_t len = blk_rq_cur_bytes(req); | |
| int err = -EIO; | |
| if ((offset + len) > jdp->dsize) | |
| goto end; | |
| if (rq_data_dir(req) != READ) { | |
| printk(KERN_ERR "jsfd: write\n"); | |
| goto end; | |
| } | |
| if ((jdp->dbase & 0xff000000) != 0x20000000) { | |
| printk(KERN_ERR "jsfd: bad base %x\n", (int)jdp->dbase); | |
| goto end; | |
| } | |
| jsfd_read(bio_data(req->bio), jdp->dbase + offset, len); | |
| err = 0; | |
| end: | |
| if (!__blk_end_request_cur(req, err)) | |
| req = blk_fetch_request(q); | |
| } | |
| } | |
| /* | |
| * The memory devices use the full 32/64 bits of the offset, and so we cannot | |
| * check against negative addresses: they are ok. The return value is weird, | |
| * though, in that case (0). | |
| * | |
| * also note that seeking relative to the "end of file" isn't supported: | |
| * it has no meaning, so it returns -EINVAL. | |
| */ | |
| static loff_t jsf_lseek(struct file * file, loff_t offset, int orig) | |
| { | |
| loff_t ret; | |
| mutex_lock(&jsf_mutex); | |
| switch (orig) { | |
| case 0: | |
| file->f_pos = offset; | |
| ret = file->f_pos; | |
| break; | |
| case 1: | |
| file->f_pos += offset; | |
| ret = file->f_pos; | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| } | |
| mutex_unlock(&jsf_mutex); | |
| return ret; | |
| } | |
| /* | |
| * OS SIMM Cannot be read in other size but a 32bits word. | |
| */ | |
| static ssize_t jsf_read(struct file * file, char __user * buf, | |
| size_t togo, loff_t *ppos) | |
| { | |
| unsigned long p = *ppos; | |
| char __user *tmp = buf; | |
| union byte4 { | |
| char s[4]; | |
| unsigned int n; | |
| } b; | |
| if (p < JSF_BASE_ALL || p >= JSF_BASE_TOP) { | |
| return 0; | |
| } | |
| if ((p + togo) < p /* wrap */ | |
| || (p + togo) >= JSF_BASE_TOP) { | |
| togo = JSF_BASE_TOP - p; | |
| } | |
| if (p < JSF_BASE_ALL && togo != 0) { | |
| #if 0 /* __bzero XXX */ | |
| size_t x = JSF_BASE_ALL - p; | |
| if (x > togo) x = togo; | |
| clear_user(tmp, x); | |
| tmp += x; | |
| p += x; | |
| togo -= x; | |
| #else | |
| /* | |
| * Implementation of clear_user() calls __bzero | |
| * without regard to modversions, | |
| * so we cannot build a module. | |
| */ | |
| return 0; | |
| #endif | |
| } | |
| while (togo >= 4) { | |
| togo -= 4; | |
| b.n = jsf_inl(p); | |
| if (copy_to_user(tmp, b.s, 4)) | |
| return -EFAULT; | |
| tmp += 4; | |
| p += 4; | |
| } | |
| /* | |
| * XXX Small togo may remain if 1 byte is ordered. | |
| * It would be nice if we did a word size read and unpacked it. | |
| */ | |
| *ppos = p; | |
| return tmp-buf; | |
| } | |
| static ssize_t jsf_write(struct file * file, const char __user * buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| return -ENOSPC; | |
| } | |
| /* | |
| */ | |
| static int jsf_ioctl_erase(unsigned long arg) | |
| { | |
| unsigned long p; | |
| /* p = jsf0.base; hits wrong bank */ | |
| p = 0x20400000; | |
| jsf_outl(p, 0xAAAAAAAA); /* Unlock 1 Write 1 */ | |
| jsf_outl(p, 0x55555555); /* Unlock 1 Write 2 */ | |
| jsf_outl(p, 0x80808080); /* Erase setup */ | |
| jsf_outl(p, 0xAAAAAAAA); /* Unlock 2 Write 1 */ | |
| jsf_outl(p, 0x55555555); /* Unlock 2 Write 2 */ | |
| jsf_outl(p, 0x10101010); /* Chip erase */ | |
| #if 0 | |
| /* | |
| * This code is ok, except that counter based timeout | |
| * has no place in this world. Let's just drop timeouts... | |
| */ | |
| { | |
| int i; | |
| __u32 x; | |
| for (i = 0; i < 1000000; i++) { | |
| x = jsf_inl(p); | |
| if ((x & 0x80808080) == 0x80808080) break; | |
| } | |
| if ((x & 0x80808080) != 0x80808080) { | |
| printk("jsf0: erase timeout with 0x%08x\n", x); | |
| } else { | |
| printk("jsf0: erase done with 0x%08x\n", x); | |
| } | |
| } | |
| #else | |
| jsf_wait(p); | |
| #endif | |
| return 0; | |
| } | |
| /* | |
| * Program a block of flash. | |
| * Very simple because we can do it byte by byte anyway. | |
| */ | |
| static int jsf_ioctl_program(void __user *arg) | |
| { | |
| struct jsflash_program_arg abuf; | |
| char __user *uptr; | |
| unsigned long p; | |
| unsigned int togo; | |
| union { | |
| unsigned int n; | |
| char s[4]; | |
| } b; | |
| if (copy_from_user(&abuf, arg, JSFPRGSZ)) | |
| return -EFAULT; | |
| p = abuf.off; | |
| togo = abuf.size; | |
| if ((togo & 3) || (p & 3)) return -EINVAL; | |
| uptr = (char __user *) (unsigned long) abuf.data; | |
| while (togo != 0) { | |
| togo -= 4; | |
| if (copy_from_user(&b.s[0], uptr, 4)) | |
| return -EFAULT; | |
| jsf_write4(p, b.n); | |
| p += 4; | |
| uptr += 4; | |
| } | |
| return 0; | |
| } | |
| static long jsf_ioctl(struct file *f, unsigned int cmd, unsigned long arg) | |
| { | |
| mutex_lock(&jsf_mutex); | |
| int error = -ENOTTY; | |
| void __user *argp = (void __user *)arg; | |
| if (!capable(CAP_SYS_ADMIN)) { | |
| mutex_unlock(&jsf_mutex); | |
| return -EPERM; | |
| } | |
| switch (cmd) { | |
| case JSFLASH_IDENT: | |
| if (copy_to_user(argp, &jsf0.id, JSFIDSZ)) { | |
| mutex_unlock(&jsf_mutex); | |
| return -EFAULT; | |
| } | |
| break; | |
| case JSFLASH_ERASE: | |
| error = jsf_ioctl_erase(arg); | |
| break; | |
| case JSFLASH_PROGRAM: | |
| error = jsf_ioctl_program(argp); | |
| break; | |
| } | |
| mutex_unlock(&jsf_mutex); | |
| return error; | |
| } | |
| static int jsf_mmap(struct file * file, struct vm_area_struct * vma) | |
| { | |
| return -ENXIO; | |
| } | |
| static int jsf_open(struct inode * inode, struct file * filp) | |
| { | |
| mutex_lock(&jsf_mutex); | |
| if (jsf0.base == 0) { | |
| mutex_unlock(&jsf_mutex); | |
| return -ENXIO; | |
| } | |
| if (test_and_set_bit(0, (void *)&jsf0.busy) != 0) { | |
| mutex_unlock(&jsf_mutex); | |
| return -EBUSY; | |
| } | |
| mutex_unlock(&jsf_mutex); | |
| return 0; /* XXX What security? */ | |
| } | |
| static int jsf_release(struct inode *inode, struct file *file) | |
| { | |
| jsf0.busy = 0; | |
| return 0; | |
| } | |
| static const struct file_operations jsf_fops = { | |
| .owner = THIS_MODULE, | |
| .llseek = jsf_lseek, | |
| .read = jsf_read, | |
| .write = jsf_write, | |
| .unlocked_ioctl = jsf_ioctl, | |
| .mmap = jsf_mmap, | |
| .open = jsf_open, | |
| .release = jsf_release, | |
| }; | |
| static struct miscdevice jsf_dev = { JSF_MINOR, "jsflash", &jsf_fops }; | |
| static const struct block_device_operations jsfd_fops = { | |
| .owner = THIS_MODULE, | |
| }; | |
| static int jsflash_init(void) | |
| { | |
| int rc; | |
| struct jsflash *jsf; | |
| phandle node; | |
| char banner[128]; | |
| struct linux_prom_registers reg0; | |
| node = prom_getchild(prom_root_node); | |
| node = prom_searchsiblings(node, "flash-memory"); | |
| if (node != 0 && (s32)node != -1) { | |
| if (prom_getproperty(node, "reg", | |
| (char *)®0, sizeof(reg0)) == -1) { | |
| printk("jsflash: no \"reg\" property\n"); | |
| return -ENXIO; | |
| } | |
| if (reg0.which_io != 0) { | |
| printk("jsflash: bus number nonzero: 0x%x:%x\n", | |
| reg0.which_io, reg0.phys_addr); | |
| return -ENXIO; | |
| } | |
| /* | |
| * Flash may be somewhere else, for instance on Ebus. | |
| * So, don't do the following check for IIep flash space. | |
| */ | |
| #if 0 | |
| if ((reg0.phys_addr >> 24) != 0x20) { | |
| printk("jsflash: suspicious address: 0x%x:%x\n", | |
| reg0.which_io, reg0.phys_addr); | |
| return -ENXIO; | |
| } | |
| #endif | |
| if ((int)reg0.reg_size <= 0) { | |
| printk("jsflash: bad size 0x%x\n", (int)reg0.reg_size); | |
| return -ENXIO; | |
| } | |
| } else { | |
| /* XXX Remove this code once PROLL ID12 got widespread */ | |
| printk("jsflash: no /flash-memory node, use PROLL >= 12\n"); | |
| prom_getproperty(prom_root_node, "banner-name", banner, 128); | |
| if (strcmp (banner, "JavaStation-NC") != 0 && | |
| strcmp (banner, "JavaStation-E") != 0) { | |
| return -ENXIO; | |
| } | |
| reg0.which_io = 0; | |
| reg0.phys_addr = 0x20400000; | |
| reg0.reg_size = 0x00800000; | |
| } | |
| /* Let us be really paranoid for modifications to probing code. */ | |
| if (sparc_cpu_model != sun4m) { | |
| /* We must be on sun4m because we use MMU Bypass ASI. */ | |
| return -ENXIO; | |
| } | |
| if (jsf0.base == 0) { | |
| jsf = &jsf0; | |
| jsf->base = reg0.phys_addr; | |
| jsf->size = reg0.reg_size; | |
| /* XXX Redo the userland interface. */ | |
| jsf->id.off = JSF_BASE_ALL; | |
| jsf->id.size = 0x01000000; /* 16M - all segments */ | |
| strcpy(jsf->id.name, "Krups_all"); | |
| jsf->dv[0].dbase = jsf->base; | |
| jsf->dv[0].dsize = jsf->size; | |
| jsf->dv[1].dbase = jsf->base + 1024; | |
| jsf->dv[1].dsize = jsf->size - 1024; | |
| jsf->dv[2].dbase = JSF_BASE_ALL; | |
| jsf->dv[2].dsize = 0x01000000; | |
| printk("Espresso Flash @0x%lx [%d MB]\n", jsf->base, | |
| (int) (jsf->size / (1024*1024))); | |
| } | |
| if ((rc = misc_register(&jsf_dev)) != 0) { | |
| printk(KERN_ERR "jsf: unable to get misc minor %d\n", | |
| JSF_MINOR); | |
| jsf0.base = 0; | |
| return rc; | |
| } | |
| return 0; | |
| } | |
| static struct request_queue *jsf_queue; | |
| static int jsfd_init(void) | |
| { | |
| static DEFINE_SPINLOCK(lock); | |
| struct jsflash *jsf; | |
| struct jsfd_part *jdp; | |
| int err; | |
| int i; | |
| if (jsf0.base == 0) | |
| return -ENXIO; | |
| err = -ENOMEM; | |
| for (i = 0; i < JSF_MAX; i++) { | |
| struct gendisk *disk = alloc_disk(1); | |
| if (!disk) | |
| goto out; | |
| jsfd_disk[i] = disk; | |
| } | |
| if (register_blkdev(JSFD_MAJOR, "jsfd")) { | |
| err = -EIO; | |
| goto out; | |
| } | |
| jsf_queue = blk_init_queue(jsfd_do_request, &lock); | |
| if (!jsf_queue) { | |
| err = -ENOMEM; | |
| unregister_blkdev(JSFD_MAJOR, "jsfd"); | |
| goto out; | |
| } | |
| for (i = 0; i < JSF_MAX; i++) { | |
| struct gendisk *disk = jsfd_disk[i]; | |
| if ((i & JSF_PART_MASK) >= JSF_NPART) continue; | |
| jsf = &jsf0; /* actually, &jsfv[i >> JSF_PART_BITS] */ | |
| jdp = &jsf->dv[i&JSF_PART_MASK]; | |
| disk->major = JSFD_MAJOR; | |
| disk->first_minor = i; | |
| sprintf(disk->disk_name, "jsfd%d", i); | |
| disk->fops = &jsfd_fops; | |
| set_capacity(disk, jdp->dsize >> 9); | |
| disk->private_data = jdp; | |
| disk->queue = jsf_queue; | |
| add_disk(disk); | |
| set_disk_ro(disk, 1); | |
| } | |
| return 0; | |
| out: | |
| while (i--) | |
| put_disk(jsfd_disk[i]); | |
| return err; | |
| } | |
| MODULE_LICENSE("GPL"); | |
| static int __init jsflash_init_module(void) { | |
| int rc; | |
| if ((rc = jsflash_init()) == 0) { | |
| jsfd_init(); | |
| return 0; | |
| } | |
| return rc; | |
| } | |
| static void __exit jsflash_cleanup_module(void) | |
| { | |
| int i; | |
| for (i = 0; i < JSF_MAX; i++) { | |
| if ((i & JSF_PART_MASK) >= JSF_NPART) continue; | |
| del_gendisk(jsfd_disk[i]); | |
| put_disk(jsfd_disk[i]); | |
| } | |
| if (jsf0.busy) | |
| printk("jsf0: cleaning busy unit\n"); | |
| jsf0.base = 0; | |
| jsf0.busy = 0; | |
| misc_deregister(&jsf_dev); | |
| unregister_blkdev(JSFD_MAJOR, "jsfd"); | |
| blk_cleanup_queue(jsf_queue); | |
| } | |
| module_init(jsflash_init_module); | |
| module_exit(jsflash_cleanup_module); |