| #include <linux/types.h> | |
| #include <linux/init.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/mm.h> | |
| #include <linux/slab.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/zorro.h> | |
| #include <linux/module.h> | |
| #include <asm/page.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/amigaints.h> | |
| #include <asm/amigahw.h> | |
| #include "scsi.h" | |
| #include "wd33c93.h" | |
| #include "a2091.h" | |
| struct a2091_hostdata { | |
| struct WD33C93_hostdata wh; | |
| struct a2091_scsiregs *regs; | |
| }; | |
| static irqreturn_t a2091_intr(int irq, void *data) | |
| { | |
| struct Scsi_Host *instance = data; | |
| struct a2091_hostdata *hdata = shost_priv(instance); | |
| unsigned int status = hdata->regs->ISTR; | |
| unsigned long flags; | |
| if (!(status & (ISTR_INT_F | ISTR_INT_P)) || !(status & ISTR_INTS)) | |
| return IRQ_NONE; | |
| spin_lock_irqsave(instance->host_lock, flags); | |
| wd33c93_intr(instance); | |
| spin_unlock_irqrestore(instance->host_lock, flags); | |
| return IRQ_HANDLED; | |
| } | |
| static int dma_setup(struct scsi_cmnd *cmd, int dir_in) | |
| { | |
| struct Scsi_Host *instance = cmd->device->host; | |
| struct a2091_hostdata *hdata = shost_priv(instance); | |
| struct WD33C93_hostdata *wh = &hdata->wh; | |
| struct a2091_scsiregs *regs = hdata->regs; | |
| unsigned short cntr = CNTR_PDMD | CNTR_INTEN; | |
| unsigned long addr = virt_to_bus(cmd->SCp.ptr); | |
| /* don't allow DMA if the physical address is bad */ | |
| if (addr & A2091_XFER_MASK) { | |
| wh->dma_bounce_len = (cmd->SCp.this_residual + 511) & ~0x1ff; | |
| wh->dma_bounce_buffer = kmalloc(wh->dma_bounce_len, | |
| GFP_KERNEL); | |
| /* can't allocate memory; use PIO */ | |
| if (!wh->dma_bounce_buffer) { | |
| wh->dma_bounce_len = 0; | |
| return 1; | |
| } | |
| /* get the physical address of the bounce buffer */ | |
| addr = virt_to_bus(wh->dma_bounce_buffer); | |
| /* the bounce buffer may not be in the first 16M of physmem */ | |
| if (addr & A2091_XFER_MASK) { | |
| /* we could use chipmem... maybe later */ | |
| kfree(wh->dma_bounce_buffer); | |
| wh->dma_bounce_buffer = NULL; | |
| wh->dma_bounce_len = 0; | |
| return 1; | |
| } | |
| if (!dir_in) { | |
| /* copy to bounce buffer for a write */ | |
| memcpy(wh->dma_bounce_buffer, cmd->SCp.ptr, | |
| cmd->SCp.this_residual); | |
| } | |
| } | |
| /* setup dma direction */ | |
| if (!dir_in) | |
| cntr |= CNTR_DDIR; | |
| /* remember direction */ | |
| wh->dma_dir = dir_in; | |
| regs->CNTR = cntr; | |
| /* setup DMA *physical* address */ | |
| regs->ACR = addr; | |
| if (dir_in) { | |
| /* invalidate any cache */ | |
| cache_clear(addr, cmd->SCp.this_residual); | |
| } else { | |
| /* push any dirty cache */ | |
| cache_push(addr, cmd->SCp.this_residual); | |
| } | |
| /* start DMA */ | |
| regs->ST_DMA = 1; | |
| /* return success */ | |
| return 0; | |
| } | |
| static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt, | |
| int status) | |
| { | |
| struct a2091_hostdata *hdata = shost_priv(instance); | |
| struct WD33C93_hostdata *wh = &hdata->wh; | |
| struct a2091_scsiregs *regs = hdata->regs; | |
| /* disable SCSI interrupts */ | |
| unsigned short cntr = CNTR_PDMD; | |
| if (!wh->dma_dir) | |
| cntr |= CNTR_DDIR; | |
| /* disable SCSI interrupts */ | |
| regs->CNTR = cntr; | |
| /* flush if we were reading */ | |
| if (wh->dma_dir) { | |
| regs->FLUSH = 1; | |
| while (!(regs->ISTR & ISTR_FE_FLG)) | |
| ; | |
| } | |
| /* clear a possible interrupt */ | |
| regs->CINT = 1; | |
| /* stop DMA */ | |
| regs->SP_DMA = 1; | |
| /* restore the CONTROL bits (minus the direction flag) */ | |
| regs->CNTR = CNTR_PDMD | CNTR_INTEN; | |
| /* copy from a bounce buffer, if necessary */ | |
| if (status && wh->dma_bounce_buffer) { | |
| if (wh->dma_dir) | |
| memcpy(SCpnt->SCp.ptr, wh->dma_bounce_buffer, | |
| SCpnt->SCp.this_residual); | |
| kfree(wh->dma_bounce_buffer); | |
| wh->dma_bounce_buffer = NULL; | |
| wh->dma_bounce_len = 0; | |
| } | |
| } | |
| static int a2091_bus_reset(struct scsi_cmnd *cmd) | |
| { | |
| struct Scsi_Host *instance = cmd->device->host; | |
| /* FIXME perform bus-specific reset */ | |
| /* FIXME 2: kill this function, and let midlayer fall back | |
| to the same action, calling wd33c93_host_reset() */ | |
| spin_lock_irq(instance->host_lock); | |
| wd33c93_host_reset(cmd); | |
| spin_unlock_irq(instance->host_lock); | |
| return SUCCESS; | |
| } | |
| static struct scsi_host_template a2091_scsi_template = { | |
| .module = THIS_MODULE, | |
| .name = "Commodore A2091/A590 SCSI", | |
| .show_info = wd33c93_show_info, | |
| .write_info = wd33c93_write_info, | |
| .proc_name = "A2901", | |
| .queuecommand = wd33c93_queuecommand, | |
| .eh_abort_handler = wd33c93_abort, | |
| .eh_bus_reset_handler = a2091_bus_reset, | |
| .eh_host_reset_handler = wd33c93_host_reset, | |
| .can_queue = CAN_QUEUE, | |
| .this_id = 7, | |
| .sg_tablesize = SG_ALL, | |
| .cmd_per_lun = CMD_PER_LUN, | |
| .use_clustering = DISABLE_CLUSTERING | |
| }; | |
| static int a2091_probe(struct zorro_dev *z, const struct zorro_device_id *ent) | |
| { | |
| struct Scsi_Host *instance; | |
| int error; | |
| struct a2091_scsiregs *regs; | |
| wd33c93_regs wdregs; | |
| struct a2091_hostdata *hdata; | |
| if (!request_mem_region(z->resource.start, 256, "wd33c93")) | |
| return -EBUSY; | |
| instance = scsi_host_alloc(&a2091_scsi_template, | |
| sizeof(struct a2091_hostdata)); | |
| if (!instance) { | |
| error = -ENOMEM; | |
| goto fail_alloc; | |
| } | |
| instance->irq = IRQ_AMIGA_PORTS; | |
| instance->unique_id = z->slotaddr; | |
| regs = ZTWO_VADDR(z->resource.start); | |
| regs->DAWR = DAWR_A2091; | |
| wdregs.SASR = ®s->SASR; | |
| wdregs.SCMD = ®s->SCMD; | |
| hdata = shost_priv(instance); | |
| hdata->wh.no_sync = 0xff; | |
| hdata->wh.fast = 0; | |
| hdata->wh.dma_mode = CTRL_DMA; | |
| hdata->regs = regs; | |
| wd33c93_init(instance, wdregs, dma_setup, dma_stop, WD33C93_FS_8_10); | |
| error = request_irq(IRQ_AMIGA_PORTS, a2091_intr, IRQF_SHARED, | |
| "A2091 SCSI", instance); | |
| if (error) | |
| goto fail_irq; | |
| regs->CNTR = CNTR_PDMD | CNTR_INTEN; | |
| error = scsi_add_host(instance, NULL); | |
| if (error) | |
| goto fail_host; | |
| zorro_set_drvdata(z, instance); | |
| scsi_scan_host(instance); | |
| return 0; | |
| fail_host: | |
| free_irq(IRQ_AMIGA_PORTS, instance); | |
| fail_irq: | |
| scsi_host_put(instance); | |
| fail_alloc: | |
| release_mem_region(z->resource.start, 256); | |
| return error; | |
| } | |
| static void a2091_remove(struct zorro_dev *z) | |
| { | |
| struct Scsi_Host *instance = zorro_get_drvdata(z); | |
| struct a2091_hostdata *hdata = shost_priv(instance); | |
| hdata->regs->CNTR = 0; | |
| scsi_remove_host(instance); | |
| free_irq(IRQ_AMIGA_PORTS, instance); | |
| scsi_host_put(instance); | |
| release_mem_region(z->resource.start, 256); | |
| } | |
| static struct zorro_device_id a2091_zorro_tbl[] = { | |
| { ZORRO_PROD_CBM_A590_A2091_1 }, | |
| { ZORRO_PROD_CBM_A590_A2091_2 }, | |
| { 0 } | |
| }; | |
| MODULE_DEVICE_TABLE(zorro, a2091_zorro_tbl); | |
| static struct zorro_driver a2091_driver = { | |
| .name = "a2091", | |
| .id_table = a2091_zorro_tbl, | |
| .probe = a2091_probe, | |
| .remove = a2091_remove, | |
| }; | |
| static int __init a2091_init(void) | |
| { | |
| return zorro_register_driver(&a2091_driver); | |
| } | |
| module_init(a2091_init); | |
| static void __exit a2091_exit(void) | |
| { | |
| zorro_unregister_driver(&a2091_driver); | |
| } | |
| module_exit(a2091_exit); | |
| MODULE_DESCRIPTION("Commodore A2091/A590 SCSI"); | |
| MODULE_LICENSE("GPL"); |