| /* | |
| * Adaptec AAC series RAID controller driver | |
| * (c) Copyright 2001 Red Hat Inc. | |
| * | |
| * based on the old aacraid driver that is.. | |
| * Adaptec aacraid device driver for Linux. | |
| * | |
| * Copyright (c) 2000-2010 Adaptec, Inc. | |
| * 2010 PMC-Sierra, Inc. (aacraid@pmc-sierra.com) | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2, or (at your option) | |
| * any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; see the file COPYING. If not, write to | |
| * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. | |
| * | |
| * Module Name: | |
| * dpcsup.c | |
| * | |
| * Abstract: All DPC processing routines for the cyclone board occur here. | |
| * | |
| * | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/types.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/slab.h> | |
| #include <linux/completion.h> | |
| #include <linux/blkdev.h> | |
| #include <linux/semaphore.h> | |
| #include "aacraid.h" | |
| /** | |
| * aac_response_normal - Handle command replies | |
| * @q: Queue to read from | |
| * | |
| * This DPC routine will be run when the adapter interrupts us to let us | |
| * know there is a response on our normal priority queue. We will pull off | |
| * all QE there are and wake up all the waiters before exiting. We will | |
| * take a spinlock out on the queue before operating on it. | |
| */ | |
| unsigned int aac_response_normal(struct aac_queue * q) | |
| { | |
| struct aac_dev * dev = q->dev; | |
| struct aac_entry *entry; | |
| struct hw_fib * hwfib; | |
| struct fib * fib; | |
| int consumed = 0; | |
| unsigned long flags, mflags; | |
| spin_lock_irqsave(q->lock, flags); | |
| /* | |
| * Keep pulling response QEs off the response queue and waking | |
| * up the waiters until there are no more QEs. We then return | |
| * back to the system. If no response was requesed we just | |
| * deallocate the Fib here and continue. | |
| */ | |
| while(aac_consumer_get(dev, q, &entry)) | |
| { | |
| int fast; | |
| u32 index = le32_to_cpu(entry->addr); | |
| fast = index & 0x01; | |
| fib = &dev->fibs[index >> 2]; | |
| hwfib = fib->hw_fib_va; | |
| aac_consumer_free(dev, q, HostNormRespQueue); | |
| /* | |
| * Remove this fib from the Outstanding I/O queue. | |
| * But only if it has not already been timed out. | |
| * | |
| * If the fib has been timed out already, then just | |
| * continue. The caller has already been notified that | |
| * the fib timed out. | |
| */ | |
| atomic_dec(&dev->queues->queue[AdapNormCmdQueue].numpending); | |
| if (unlikely(fib->flags & FIB_CONTEXT_FLAG_TIMED_OUT)) { | |
| spin_unlock_irqrestore(q->lock, flags); | |
| aac_fib_complete(fib); | |
| aac_fib_free(fib); | |
| spin_lock_irqsave(q->lock, flags); | |
| continue; | |
| } | |
| spin_unlock_irqrestore(q->lock, flags); | |
| if (fast) { | |
| /* | |
| * Doctor the fib | |
| */ | |
| *(__le32 *)hwfib->data = cpu_to_le32(ST_OK); | |
| hwfib->header.XferState |= cpu_to_le32(AdapterProcessed); | |
| fib->flags |= FIB_CONTEXT_FLAG_FASTRESP; | |
| } | |
| FIB_COUNTER_INCREMENT(aac_config.FibRecved); | |
| if (hwfib->header.Command == cpu_to_le16(NuFileSystem)) | |
| { | |
| __le32 *pstatus = (__le32 *)hwfib->data; | |
| if (*pstatus & cpu_to_le32(0xffff0000)) | |
| *pstatus = cpu_to_le32(ST_OK); | |
| } | |
| if (hwfib->header.XferState & cpu_to_le32(NoResponseExpected | Async)) | |
| { | |
| if (hwfib->header.XferState & cpu_to_le32(NoResponseExpected)) | |
| FIB_COUNTER_INCREMENT(aac_config.NoResponseRecved); | |
| else | |
| FIB_COUNTER_INCREMENT(aac_config.AsyncRecved); | |
| /* | |
| * NOTE: we cannot touch the fib after this | |
| * call, because it may have been deallocated. | |
| */ | |
| fib->flags &= FIB_CONTEXT_FLAG_FASTRESP; | |
| fib->callback(fib->callback_data, fib); | |
| } else { | |
| unsigned long flagv; | |
| spin_lock_irqsave(&fib->event_lock, flagv); | |
| if (!fib->done) { | |
| fib->done = 1; | |
| up(&fib->event_wait); | |
| } | |
| spin_unlock_irqrestore(&fib->event_lock, flagv); | |
| spin_lock_irqsave(&dev->manage_lock, mflags); | |
| dev->management_fib_count--; | |
| spin_unlock_irqrestore(&dev->manage_lock, mflags); | |
| FIB_COUNTER_INCREMENT(aac_config.NormalRecved); | |
| if (fib->done == 2) { | |
| spin_lock_irqsave(&fib->event_lock, flagv); | |
| fib->done = 0; | |
| spin_unlock_irqrestore(&fib->event_lock, flagv); | |
| aac_fib_complete(fib); | |
| aac_fib_free(fib); | |
| } | |
| } | |
| consumed++; | |
| spin_lock_irqsave(q->lock, flags); | |
| } | |
| if (consumed > aac_config.peak_fibs) | |
| aac_config.peak_fibs = consumed; | |
| if (consumed == 0) | |
| aac_config.zero_fibs++; | |
| spin_unlock_irqrestore(q->lock, flags); | |
| return 0; | |
| } | |
| /** | |
| * aac_command_normal - handle commands | |
| * @q: queue to process | |
| * | |
| * This DPC routine will be queued when the adapter interrupts us to | |
| * let us know there is a command on our normal priority queue. We will | |
| * pull off all QE there are and wake up all the waiters before exiting. | |
| * We will take a spinlock out on the queue before operating on it. | |
| */ | |
| unsigned int aac_command_normal(struct aac_queue *q) | |
| { | |
| struct aac_dev * dev = q->dev; | |
| struct aac_entry *entry; | |
| unsigned long flags; | |
| spin_lock_irqsave(q->lock, flags); | |
| /* | |
| * Keep pulling response QEs off the response queue and waking | |
| * up the waiters until there are no more QEs. We then return | |
| * back to the system. | |
| */ | |
| while(aac_consumer_get(dev, q, &entry)) | |
| { | |
| struct fib fibctx; | |
| struct hw_fib * hw_fib; | |
| u32 index; | |
| struct fib *fib = &fibctx; | |
| index = le32_to_cpu(entry->addr) / sizeof(struct hw_fib); | |
| hw_fib = &dev->aif_base_va[index]; | |
| /* | |
| * Allocate a FIB at all costs. For non queued stuff | |
| * we can just use the stack so we are happy. We need | |
| * a fib object in order to manage the linked lists | |
| */ | |
| if (dev->aif_thread) | |
| if((fib = kmalloc(sizeof(struct fib), GFP_ATOMIC)) == NULL) | |
| fib = &fibctx; | |
| memset(fib, 0, sizeof(struct fib)); | |
| INIT_LIST_HEAD(&fib->fiblink); | |
| fib->type = FSAFS_NTC_FIB_CONTEXT; | |
| fib->size = sizeof(struct fib); | |
| fib->hw_fib_va = hw_fib; | |
| fib->data = hw_fib->data; | |
| fib->dev = dev; | |
| if (dev->aif_thread && fib != &fibctx) { | |
| list_add_tail(&fib->fiblink, &q->cmdq); | |
| aac_consumer_free(dev, q, HostNormCmdQueue); | |
| wake_up_interruptible(&q->cmdready); | |
| } else { | |
| aac_consumer_free(dev, q, HostNormCmdQueue); | |
| spin_unlock_irqrestore(q->lock, flags); | |
| /* | |
| * Set the status of this FIB | |
| */ | |
| *(__le32 *)hw_fib->data = cpu_to_le32(ST_OK); | |
| aac_fib_adapter_complete(fib, sizeof(u32)); | |
| spin_lock_irqsave(q->lock, flags); | |
| } | |
| } | |
| spin_unlock_irqrestore(q->lock, flags); | |
| return 0; | |
| } | |
| /* | |
| * | |
| * aac_aif_callback | |
| * @context: the context set in the fib - here it is scsi cmd | |
| * @fibptr: pointer to the fib | |
| * | |
| * Handles the AIFs - new method (SRC) | |
| * | |
| */ | |
| static void aac_aif_callback(void *context, struct fib * fibptr) | |
| { | |
| struct fib *fibctx; | |
| struct aac_dev *dev; | |
| struct aac_aifcmd *cmd; | |
| int status; | |
| fibctx = (struct fib *)context; | |
| BUG_ON(fibptr == NULL); | |
| dev = fibptr->dev; | |
| if (fibptr->hw_fib_va->header.XferState & | |
| cpu_to_le32(NoMoreAifDataAvailable)) { | |
| aac_fib_complete(fibptr); | |
| aac_fib_free(fibptr); | |
| return; | |
| } | |
| aac_intr_normal(dev, 0, 1, 0, fibptr->hw_fib_va); | |
| aac_fib_init(fibctx); | |
| cmd = (struct aac_aifcmd *) fib_data(fibctx); | |
| cmd->command = cpu_to_le32(AifReqEvent); | |
| status = aac_fib_send(AifRequest, | |
| fibctx, | |
| sizeof(struct hw_fib)-sizeof(struct aac_fibhdr), | |
| FsaNormal, | |
| 0, 1, | |
| (fib_callback)aac_aif_callback, fibctx); | |
| } | |
| /** | |
| * aac_intr_normal - Handle command replies | |
| * @dev: Device | |
| * @index: completion reference | |
| * | |
| * This DPC routine will be run when the adapter interrupts us to let us | |
| * know there is a response on our normal priority queue. We will pull off | |
| * all QE there are and wake up all the waiters before exiting. | |
| */ | |
| unsigned int aac_intr_normal(struct aac_dev *dev, u32 index, | |
| int isAif, int isFastResponse, struct hw_fib *aif_fib) | |
| { | |
| unsigned long mflags; | |
| dprintk((KERN_INFO "aac_intr_normal(%p,%x)\n", dev, index)); | |
| if (isAif == 1) { /* AIF - common */ | |
| struct hw_fib * hw_fib; | |
| struct fib * fib; | |
| struct aac_queue *q = &dev->queues->queue[HostNormCmdQueue]; | |
| unsigned long flags; | |
| /* | |
| * Allocate a FIB. For non queued stuff we can just use | |
| * the stack so we are happy. We need a fib object in order to | |
| * manage the linked lists. | |
| */ | |
| if ((!dev->aif_thread) | |
| || (!(fib = kzalloc(sizeof(struct fib),GFP_ATOMIC)))) | |
| return 1; | |
| if (!(hw_fib = kzalloc(sizeof(struct hw_fib),GFP_ATOMIC))) { | |
| kfree (fib); | |
| return 1; | |
| } | |
| if (aif_fib != NULL) { | |
| memcpy(hw_fib, aif_fib, sizeof(struct hw_fib)); | |
| } else { | |
| memcpy(hw_fib, | |
| (struct hw_fib *)(((uintptr_t)(dev->regs.sa)) + | |
| index), sizeof(struct hw_fib)); | |
| } | |
| INIT_LIST_HEAD(&fib->fiblink); | |
| fib->type = FSAFS_NTC_FIB_CONTEXT; | |
| fib->size = sizeof(struct fib); | |
| fib->hw_fib_va = hw_fib; | |
| fib->data = hw_fib->data; | |
| fib->dev = dev; | |
| spin_lock_irqsave(q->lock, flags); | |
| list_add_tail(&fib->fiblink, &q->cmdq); | |
| wake_up_interruptible(&q->cmdready); | |
| spin_unlock_irqrestore(q->lock, flags); | |
| return 1; | |
| } else if (isAif == 2) { /* AIF - new (SRC) */ | |
| struct fib *fibctx; | |
| struct aac_aifcmd *cmd; | |
| fibctx = aac_fib_alloc(dev); | |
| if (!fibctx) | |
| return 1; | |
| aac_fib_init(fibctx); | |
| cmd = (struct aac_aifcmd *) fib_data(fibctx); | |
| cmd->command = cpu_to_le32(AifReqEvent); | |
| return aac_fib_send(AifRequest, | |
| fibctx, | |
| sizeof(struct hw_fib)-sizeof(struct aac_fibhdr), | |
| FsaNormal, | |
| 0, 1, | |
| (fib_callback)aac_aif_callback, fibctx); | |
| } else { | |
| struct fib *fib = &dev->fibs[index]; | |
| struct hw_fib * hwfib = fib->hw_fib_va; | |
| /* | |
| * Remove this fib from the Outstanding I/O queue. | |
| * But only if it has not already been timed out. | |
| * | |
| * If the fib has been timed out already, then just | |
| * continue. The caller has already been notified that | |
| * the fib timed out. | |
| */ | |
| atomic_dec(&dev->queues->queue[AdapNormCmdQueue].numpending); | |
| if (unlikely(fib->flags & FIB_CONTEXT_FLAG_TIMED_OUT)) { | |
| aac_fib_complete(fib); | |
| aac_fib_free(fib); | |
| return 0; | |
| } | |
| if (isFastResponse) { | |
| /* | |
| * Doctor the fib | |
| */ | |
| *(__le32 *)hwfib->data = cpu_to_le32(ST_OK); | |
| hwfib->header.XferState |= cpu_to_le32(AdapterProcessed); | |
| fib->flags |= FIB_CONTEXT_FLAG_FASTRESP; | |
| } | |
| FIB_COUNTER_INCREMENT(aac_config.FibRecved); | |
| if (hwfib->header.Command == cpu_to_le16(NuFileSystem)) | |
| { | |
| __le32 *pstatus = (__le32 *)hwfib->data; | |
| if (*pstatus & cpu_to_le32(0xffff0000)) | |
| *pstatus = cpu_to_le32(ST_OK); | |
| } | |
| if (hwfib->header.XferState & cpu_to_le32(NoResponseExpected | Async)) | |
| { | |
| if (hwfib->header.XferState & cpu_to_le32(NoResponseExpected)) | |
| FIB_COUNTER_INCREMENT(aac_config.NoResponseRecved); | |
| else | |
| FIB_COUNTER_INCREMENT(aac_config.AsyncRecved); | |
| /* | |
| * NOTE: we cannot touch the fib after this | |
| * call, because it may have been deallocated. | |
| */ | |
| if (likely(fib->callback && fib->callback_data)) { | |
| fib->flags &= FIB_CONTEXT_FLAG_FASTRESP; | |
| fib->callback(fib->callback_data, fib); | |
| } else | |
| dev_info(&dev->pdev->dev, | |
| "Invalid callback_fib[%d] (*%p)(%p)\n", | |
| index, fib->callback, fib->callback_data); | |
| } else { | |
| unsigned long flagv; | |
| dprintk((KERN_INFO "event_wait up\n")); | |
| spin_lock_irqsave(&fib->event_lock, flagv); | |
| if (!fib->done) { | |
| fib->done = 1; | |
| up(&fib->event_wait); | |
| } | |
| spin_unlock_irqrestore(&fib->event_lock, flagv); | |
| spin_lock_irqsave(&dev->manage_lock, mflags); | |
| dev->management_fib_count--; | |
| spin_unlock_irqrestore(&dev->manage_lock, mflags); | |
| FIB_COUNTER_INCREMENT(aac_config.NormalRecved); | |
| if (fib->done == 2) { | |
| spin_lock_irqsave(&fib->event_lock, flagv); | |
| fib->done = 0; | |
| spin_unlock_irqrestore(&fib->event_lock, flagv); | |
| aac_fib_complete(fib); | |
| } | |
| } | |
| return 0; | |
| } | |
| } |