| /* | |
| * This file is part of the Chelsio FCoE driver for Linux. | |
| * | |
| * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved. | |
| * | |
| * This software is available to you under a choice of one of two | |
| * licenses. You may choose to be licensed under the terms of the GNU | |
| * General Public License (GPL) Version 2, available from the file | |
| * COPYING in the main directory of this source tree, or the | |
| * OpenIB.org BSD license below: | |
| * | |
| * Redistribution and use in source and binary forms, with or | |
| * without modification, are permitted provided that the following | |
| * conditions are met: | |
| * | |
| * - Redistributions of source code must retain the above | |
| * copyright notice, this list of conditions and the following | |
| * disclaimer. | |
| * | |
| * - Redistributions in binary form must reproduce the above | |
| * copyright notice, this list of conditions and the following | |
| * disclaimer in the documentation and/or other materials | |
| * provided with the distribution. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, | |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF | |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND | |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS | |
| * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN | |
| * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
| * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE | |
| * SOFTWARE. | |
| */ | |
| #include <linux/pci.h> | |
| #include <linux/pci_regs.h> | |
| #include <linux/firmware.h> | |
| #include <linux/stddef.h> | |
| #include <linux/delay.h> | |
| #include <linux/string.h> | |
| #include <linux/compiler.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/kernel.h> | |
| #include <linux/log2.h> | |
| #include "csio_hw.h" | |
| #include "csio_lnode.h" | |
| #include "csio_rnode.h" | |
| int csio_dbg_level = 0xFEFF; | |
| unsigned int csio_port_mask = 0xf; | |
| /* Default FW event queue entries. */ | |
| static uint32_t csio_evtq_sz = CSIO_EVTQ_SIZE; | |
| /* Default MSI param level */ | |
| int csio_msi = 2; | |
| /* FCoE function instances */ | |
| static int dev_num; | |
| /* FCoE Adapter types & its description */ | |
| static const struct csio_adap_desc csio_t5_fcoe_adapters[] = { | |
| {"T580-Dbg 10G", "Chelsio T580-Dbg 10G [FCoE]"}, | |
| {"T520-CR 10G", "Chelsio T520-CR 10G [FCoE]"}, | |
| {"T522-CR 10G/1G", "Chelsio T522-CR 10G/1G [FCoE]"}, | |
| {"T540-CR 10G", "Chelsio T540-CR 10G [FCoE]"}, | |
| {"T520-BCH 10G", "Chelsio T520-BCH 10G [FCoE]"}, | |
| {"T540-BCH 10G", "Chelsio T540-BCH 10G [FCoE]"}, | |
| {"T540-CH 10G", "Chelsio T540-CH 10G [FCoE]"}, | |
| {"T520-SO 10G", "Chelsio T520-SO 10G [FCoE]"}, | |
| {"T520-CX4 10G", "Chelsio T520-CX4 10G [FCoE]"}, | |
| {"T520-BT 10G", "Chelsio T520-BT 10G [FCoE]"}, | |
| {"T504-BT 1G", "Chelsio T504-BT 1G [FCoE]"}, | |
| {"B520-SR 10G", "Chelsio B520-SR 10G [FCoE]"}, | |
| {"B504-BT 1G", "Chelsio B504-BT 1G [FCoE]"}, | |
| {"T580-CR 10G", "Chelsio T580-CR 10G [FCoE]"}, | |
| {"T540-LP-CR 10G", "Chelsio T540-LP-CR 10G [FCoE]"}, | |
| {"AMSTERDAM 10G", "Chelsio AMSTERDAM 10G [FCoE]"}, | |
| {"T580-LP-CR 40G", "Chelsio T580-LP-CR 40G [FCoE]"}, | |
| {"T520-LL-CR 10G", "Chelsio T520-LL-CR 10G [FCoE]"}, | |
| {"T560-CR 40G", "Chelsio T560-CR 40G [FCoE]"}, | |
| {"T580-CR 40G", "Chelsio T580-CR 40G [FCoE]"}, | |
| {"T580-SO 40G", "Chelsio T580-SO 40G [FCoE]"}, | |
| {"T502-BT 1G", "Chelsio T502-BT 1G [FCoE]"} | |
| }; | |
| static void csio_mgmtm_cleanup(struct csio_mgmtm *); | |
| static void csio_hw_mbm_cleanup(struct csio_hw *); | |
| /* State machine forward declarations */ | |
| static void csio_hws_uninit(struct csio_hw *, enum csio_hw_ev); | |
| static void csio_hws_configuring(struct csio_hw *, enum csio_hw_ev); | |
| static void csio_hws_initializing(struct csio_hw *, enum csio_hw_ev); | |
| static void csio_hws_ready(struct csio_hw *, enum csio_hw_ev); | |
| static void csio_hws_quiescing(struct csio_hw *, enum csio_hw_ev); | |
| static void csio_hws_quiesced(struct csio_hw *, enum csio_hw_ev); | |
| static void csio_hws_resetting(struct csio_hw *, enum csio_hw_ev); | |
| static void csio_hws_removing(struct csio_hw *, enum csio_hw_ev); | |
| static void csio_hws_pcierr(struct csio_hw *, enum csio_hw_ev); | |
| static void csio_hw_initialize(struct csio_hw *hw); | |
| static void csio_evtq_stop(struct csio_hw *hw); | |
| static void csio_evtq_start(struct csio_hw *hw); | |
| int csio_is_hw_ready(struct csio_hw *hw) | |
| { | |
| return csio_match_state(hw, csio_hws_ready); | |
| } | |
| int csio_is_hw_removing(struct csio_hw *hw) | |
| { | |
| return csio_match_state(hw, csio_hws_removing); | |
| } | |
| /* | |
| * csio_hw_wait_op_done_val - wait until an operation is completed | |
| * @hw: the HW module | |
| * @reg: the register to check for completion | |
| * @mask: a single-bit field within @reg that indicates completion | |
| * @polarity: the value of the field when the operation is completed | |
| * @attempts: number of check iterations | |
| * @delay: delay in usecs between iterations | |
| * @valp: where to store the value of the register at completion time | |
| * | |
| * Wait until an operation is completed by checking a bit in a register | |
| * up to @attempts times. If @valp is not NULL the value of the register | |
| * at the time it indicated completion is stored there. Returns 0 if the | |
| * operation completes and -EAGAIN otherwise. | |
| */ | |
| int | |
| csio_hw_wait_op_done_val(struct csio_hw *hw, int reg, uint32_t mask, | |
| int polarity, int attempts, int delay, uint32_t *valp) | |
| { | |
| uint32_t val; | |
| while (1) { | |
| val = csio_rd_reg32(hw, reg); | |
| if (!!(val & mask) == polarity) { | |
| if (valp) | |
| *valp = val; | |
| return 0; | |
| } | |
| if (--attempts == 0) | |
| return -EAGAIN; | |
| if (delay) | |
| udelay(delay); | |
| } | |
| } | |
| /* | |
| * csio_hw_tp_wr_bits_indirect - set/clear bits in an indirect TP register | |
| * @hw: the adapter | |
| * @addr: the indirect TP register address | |
| * @mask: specifies the field within the register to modify | |
| * @val: new value for the field | |
| * | |
| * Sets a field of an indirect TP register to the given value. | |
| */ | |
| void | |
| csio_hw_tp_wr_bits_indirect(struct csio_hw *hw, unsigned int addr, | |
| unsigned int mask, unsigned int val) | |
| { | |
| csio_wr_reg32(hw, addr, TP_PIO_ADDR_A); | |
| val |= csio_rd_reg32(hw, TP_PIO_DATA_A) & ~mask; | |
| csio_wr_reg32(hw, val, TP_PIO_DATA_A); | |
| } | |
| void | |
| csio_set_reg_field(struct csio_hw *hw, uint32_t reg, uint32_t mask, | |
| uint32_t value) | |
| { | |
| uint32_t val = csio_rd_reg32(hw, reg) & ~mask; | |
| csio_wr_reg32(hw, val | value, reg); | |
| /* Flush */ | |
| csio_rd_reg32(hw, reg); | |
| } | |
| static int | |
| csio_memory_write(struct csio_hw *hw, int mtype, u32 addr, u32 len, u32 *buf) | |
| { | |
| return hw->chip_ops->chip_memory_rw(hw, MEMWIN_CSIOSTOR, mtype, | |
| addr, len, buf, 0); | |
| } | |
| /* | |
| * EEPROM reads take a few tens of us while writes can take a bit over 5 ms. | |
| */ | |
| #define EEPROM_MAX_RD_POLL 40 | |
| #define EEPROM_MAX_WR_POLL 6 | |
| #define EEPROM_STAT_ADDR 0x7bfc | |
| #define VPD_BASE 0x400 | |
| #define VPD_BASE_OLD 0 | |
| #define VPD_LEN 1024 | |
| #define VPD_INFO_FLD_HDR_SIZE 3 | |
| /* | |
| * csio_hw_seeprom_read - read a serial EEPROM location | |
| * @hw: hw to read | |
| * @addr: EEPROM virtual address | |
| * @data: where to store the read data | |
| * | |
| * Read a 32-bit word from a location in serial EEPROM using the card's PCI | |
| * VPD capability. Note that this function must be called with a virtual | |
| * address. | |
| */ | |
| static int | |
| csio_hw_seeprom_read(struct csio_hw *hw, uint32_t addr, uint32_t *data) | |
| { | |
| uint16_t val = 0; | |
| int attempts = EEPROM_MAX_RD_POLL; | |
| uint32_t base = hw->params.pci.vpd_cap_addr; | |
| if (addr >= EEPROMVSIZE || (addr & 3)) | |
| return -EINVAL; | |
| pci_write_config_word(hw->pdev, base + PCI_VPD_ADDR, (uint16_t)addr); | |
| do { | |
| udelay(10); | |
| pci_read_config_word(hw->pdev, base + PCI_VPD_ADDR, &val); | |
| } while (!(val & PCI_VPD_ADDR_F) && --attempts); | |
| if (!(val & PCI_VPD_ADDR_F)) { | |
| csio_err(hw, "reading EEPROM address 0x%x failed\n", addr); | |
| return -EINVAL; | |
| } | |
| pci_read_config_dword(hw->pdev, base + PCI_VPD_DATA, data); | |
| *data = le32_to_cpu(*(__le32 *)data); | |
| return 0; | |
| } | |
| /* | |
| * Partial EEPROM Vital Product Data structure. Includes only the ID and | |
| * VPD-R sections. | |
| */ | |
| struct t4_vpd_hdr { | |
| u8 id_tag; | |
| u8 id_len[2]; | |
| u8 id_data[ID_LEN]; | |
| u8 vpdr_tag; | |
| u8 vpdr_len[2]; | |
| }; | |
| /* | |
| * csio_hw_get_vpd_keyword_val - Locates an information field keyword in | |
| * the VPD | |
| * @v: Pointer to buffered vpd data structure | |
| * @kw: The keyword to search for | |
| * | |
| * Returns the value of the information field keyword or | |
| * -EINVAL otherwise. | |
| */ | |
| static int | |
| csio_hw_get_vpd_keyword_val(const struct t4_vpd_hdr *v, const char *kw) | |
| { | |
| int32_t i; | |
| int32_t offset , len; | |
| const uint8_t *buf = &v->id_tag; | |
| const uint8_t *vpdr_len = &v->vpdr_tag; | |
| offset = sizeof(struct t4_vpd_hdr); | |
| len = (uint16_t)vpdr_len[1] + ((uint16_t)vpdr_len[2] << 8); | |
| if (len + sizeof(struct t4_vpd_hdr) > VPD_LEN) | |
| return -EINVAL; | |
| for (i = offset; (i + VPD_INFO_FLD_HDR_SIZE) <= (offset + len);) { | |
| if (memcmp(buf + i , kw, 2) == 0) { | |
| i += VPD_INFO_FLD_HDR_SIZE; | |
| return i; | |
| } | |
| i += VPD_INFO_FLD_HDR_SIZE + buf[i+2]; | |
| } | |
| return -EINVAL; | |
| } | |
| static int | |
| csio_pci_capability(struct pci_dev *pdev, int cap, int *pos) | |
| { | |
| *pos = pci_find_capability(pdev, cap); | |
| if (*pos) | |
| return 0; | |
| return -1; | |
| } | |
| /* | |
| * csio_hw_get_vpd_params - read VPD parameters from VPD EEPROM | |
| * @hw: HW module | |
| * @p: where to store the parameters | |
| * | |
| * Reads card parameters stored in VPD EEPROM. | |
| */ | |
| static int | |
| csio_hw_get_vpd_params(struct csio_hw *hw, struct csio_vpd *p) | |
| { | |
| int i, ret, ec, sn, addr; | |
| uint8_t *vpd, csum; | |
| const struct t4_vpd_hdr *v; | |
| /* To get around compilation warning from strstrip */ | |
| char *s; | |
| if (csio_is_valid_vpd(hw)) | |
| return 0; | |
| ret = csio_pci_capability(hw->pdev, PCI_CAP_ID_VPD, | |
| &hw->params.pci.vpd_cap_addr); | |
| if (ret) | |
| return -EINVAL; | |
| vpd = kzalloc(VPD_LEN, GFP_ATOMIC); | |
| if (vpd == NULL) | |
| return -ENOMEM; | |
| /* | |
| * Card information normally starts at VPD_BASE but early cards had | |
| * it at 0. | |
| */ | |
| ret = csio_hw_seeprom_read(hw, VPD_BASE, (uint32_t *)(vpd)); | |
| addr = *vpd == 0x82 ? VPD_BASE : VPD_BASE_OLD; | |
| for (i = 0; i < VPD_LEN; i += 4) { | |
| ret = csio_hw_seeprom_read(hw, addr + i, (uint32_t *)(vpd + i)); | |
| if (ret) { | |
| kfree(vpd); | |
| return ret; | |
| } | |
| } | |
| /* Reset the VPD flag! */ | |
| hw->flags &= (~CSIO_HWF_VPD_VALID); | |
| v = (const struct t4_vpd_hdr *)vpd; | |
| #define FIND_VPD_KW(var, name) do { \ | |
| var = csio_hw_get_vpd_keyword_val(v, name); \ | |
| if (var < 0) { \ | |
| csio_err(hw, "missing VPD keyword " name "\n"); \ | |
| kfree(vpd); \ | |
| return -EINVAL; \ | |
| } \ | |
| } while (0) | |
| FIND_VPD_KW(i, "RV"); | |
| for (csum = 0; i >= 0; i--) | |
| csum += vpd[i]; | |
| if (csum) { | |
| csio_err(hw, "corrupted VPD EEPROM, actual csum %u\n", csum); | |
| kfree(vpd); | |
| return -EINVAL; | |
| } | |
| FIND_VPD_KW(ec, "EC"); | |
| FIND_VPD_KW(sn, "SN"); | |
| #undef FIND_VPD_KW | |
| memcpy(p->id, v->id_data, ID_LEN); | |
| s = strstrip(p->id); | |
| memcpy(p->ec, vpd + ec, EC_LEN); | |
| s = strstrip(p->ec); | |
| i = vpd[sn - VPD_INFO_FLD_HDR_SIZE + 2]; | |
| memcpy(p->sn, vpd + sn, min(i, SERNUM_LEN)); | |
| s = strstrip(p->sn); | |
| csio_valid_vpd_copied(hw); | |
| kfree(vpd); | |
| return 0; | |
| } | |
| /* | |
| * csio_hw_sf1_read - read data from the serial flash | |
| * @hw: the HW module | |
| * @byte_cnt: number of bytes to read | |
| * @cont: whether another operation will be chained | |
| * @lock: whether to lock SF for PL access only | |
| * @valp: where to store the read data | |
| * | |
| * Reads up to 4 bytes of data from the serial flash. The location of | |
| * the read needs to be specified prior to calling this by issuing the | |
| * appropriate commands to the serial flash. | |
| */ | |
| static int | |
| csio_hw_sf1_read(struct csio_hw *hw, uint32_t byte_cnt, int32_t cont, | |
| int32_t lock, uint32_t *valp) | |
| { | |
| int ret; | |
| if (!byte_cnt || byte_cnt > 4) | |
| return -EINVAL; | |
| if (csio_rd_reg32(hw, SF_OP_A) & SF_BUSY_F) | |
| return -EBUSY; | |
| csio_wr_reg32(hw, SF_LOCK_V(lock) | SF_CONT_V(cont) | | |
| BYTECNT_V(byte_cnt - 1), SF_OP_A); | |
| ret = csio_hw_wait_op_done_val(hw, SF_OP_A, SF_BUSY_F, 0, SF_ATTEMPTS, | |
| 10, NULL); | |
| if (!ret) | |
| *valp = csio_rd_reg32(hw, SF_DATA_A); | |
| return ret; | |
| } | |
| /* | |
| * csio_hw_sf1_write - write data to the serial flash | |
| * @hw: the HW module | |
| * @byte_cnt: number of bytes to write | |
| * @cont: whether another operation will be chained | |
| * @lock: whether to lock SF for PL access only | |
| * @val: value to write | |
| * | |
| * Writes up to 4 bytes of data to the serial flash. The location of | |
| * the write needs to be specified prior to calling this by issuing the | |
| * appropriate commands to the serial flash. | |
| */ | |
| static int | |
| csio_hw_sf1_write(struct csio_hw *hw, uint32_t byte_cnt, uint32_t cont, | |
| int32_t lock, uint32_t val) | |
| { | |
| if (!byte_cnt || byte_cnt > 4) | |
| return -EINVAL; | |
| if (csio_rd_reg32(hw, SF_OP_A) & SF_BUSY_F) | |
| return -EBUSY; | |
| csio_wr_reg32(hw, val, SF_DATA_A); | |
| csio_wr_reg32(hw, SF_CONT_V(cont) | BYTECNT_V(byte_cnt - 1) | | |
| OP_V(1) | SF_LOCK_V(lock), SF_OP_A); | |
| return csio_hw_wait_op_done_val(hw, SF_OP_A, SF_BUSY_F, 0, SF_ATTEMPTS, | |
| 10, NULL); | |
| } | |
| /* | |
| * csio_hw_flash_wait_op - wait for a flash operation to complete | |
| * @hw: the HW module | |
| * @attempts: max number of polls of the status register | |
| * @delay: delay between polls in ms | |
| * | |
| * Wait for a flash operation to complete by polling the status register. | |
| */ | |
| static int | |
| csio_hw_flash_wait_op(struct csio_hw *hw, int32_t attempts, int32_t delay) | |
| { | |
| int ret; | |
| uint32_t status; | |
| while (1) { | |
| ret = csio_hw_sf1_write(hw, 1, 1, 1, SF_RD_STATUS); | |
| if (ret != 0) | |
| return ret; | |
| ret = csio_hw_sf1_read(hw, 1, 0, 1, &status); | |
| if (ret != 0) | |
| return ret; | |
| if (!(status & 1)) | |
| return 0; | |
| if (--attempts == 0) | |
| return -EAGAIN; | |
| if (delay) | |
| msleep(delay); | |
| } | |
| } | |
| /* | |
| * csio_hw_read_flash - read words from serial flash | |
| * @hw: the HW module | |
| * @addr: the start address for the read | |
| * @nwords: how many 32-bit words to read | |
| * @data: where to store the read data | |
| * @byte_oriented: whether to store data as bytes or as words | |
| * | |
| * Read the specified number of 32-bit words from the serial flash. | |
| * If @byte_oriented is set the read data is stored as a byte array | |
| * (i.e., big-endian), otherwise as 32-bit words in the platform's | |
| * natural endianess. | |
| */ | |
| static int | |
| csio_hw_read_flash(struct csio_hw *hw, uint32_t addr, uint32_t nwords, | |
| uint32_t *data, int32_t byte_oriented) | |
| { | |
| int ret; | |
| if (addr + nwords * sizeof(uint32_t) > hw->params.sf_size || (addr & 3)) | |
| return -EINVAL; | |
| addr = swab32(addr) | SF_RD_DATA_FAST; | |
| ret = csio_hw_sf1_write(hw, 4, 1, 0, addr); | |
| if (ret != 0) | |
| return ret; | |
| ret = csio_hw_sf1_read(hw, 1, 1, 0, data); | |
| if (ret != 0) | |
| return ret; | |
| for ( ; nwords; nwords--, data++) { | |
| ret = csio_hw_sf1_read(hw, 4, nwords > 1, nwords == 1, data); | |
| if (nwords == 1) | |
| csio_wr_reg32(hw, 0, SF_OP_A); /* unlock SF */ | |
| if (ret) | |
| return ret; | |
| if (byte_oriented) | |
| *data = (__force __u32) htonl(*data); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * csio_hw_write_flash - write up to a page of data to the serial flash | |
| * @hw: the hw | |
| * @addr: the start address to write | |
| * @n: length of data to write in bytes | |
| * @data: the data to write | |
| * | |
| * Writes up to a page of data (256 bytes) to the serial flash starting | |
| * at the given address. All the data must be written to the same page. | |
| */ | |
| static int | |
| csio_hw_write_flash(struct csio_hw *hw, uint32_t addr, | |
| uint32_t n, const uint8_t *data) | |
| { | |
| int ret = -EINVAL; | |
| uint32_t buf[64]; | |
| uint32_t i, c, left, val, offset = addr & 0xff; | |
| if (addr >= hw->params.sf_size || offset + n > SF_PAGE_SIZE) | |
| return -EINVAL; | |
| val = swab32(addr) | SF_PROG_PAGE; | |
| ret = csio_hw_sf1_write(hw, 1, 0, 1, SF_WR_ENABLE); | |
| if (ret != 0) | |
| goto unlock; | |
| ret = csio_hw_sf1_write(hw, 4, 1, 1, val); | |
| if (ret != 0) | |
| goto unlock; | |
| for (left = n; left; left -= c) { | |
| c = min(left, 4U); | |
| for (val = 0, i = 0; i < c; ++i) | |
| val = (val << 8) + *data++; | |
| ret = csio_hw_sf1_write(hw, c, c != left, 1, val); | |
| if (ret) | |
| goto unlock; | |
| } | |
| ret = csio_hw_flash_wait_op(hw, 8, 1); | |
| if (ret) | |
| goto unlock; | |
| csio_wr_reg32(hw, 0, SF_OP_A); /* unlock SF */ | |
| /* Read the page to verify the write succeeded */ | |
| ret = csio_hw_read_flash(hw, addr & ~0xff, ARRAY_SIZE(buf), buf, 1); | |
| if (ret) | |
| return ret; | |
| if (memcmp(data - n, (uint8_t *)buf + offset, n)) { | |
| csio_err(hw, | |
| "failed to correctly write the flash page at %#x\n", | |
| addr); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| unlock: | |
| csio_wr_reg32(hw, 0, SF_OP_A); /* unlock SF */ | |
| return ret; | |
| } | |
| /* | |
| * csio_hw_flash_erase_sectors - erase a range of flash sectors | |
| * @hw: the HW module | |
| * @start: the first sector to erase | |
| * @end: the last sector to erase | |
| * | |
| * Erases the sectors in the given inclusive range. | |
| */ | |
| static int | |
| csio_hw_flash_erase_sectors(struct csio_hw *hw, int32_t start, int32_t end) | |
| { | |
| int ret = 0; | |
| while (start <= end) { | |
| ret = csio_hw_sf1_write(hw, 1, 0, 1, SF_WR_ENABLE); | |
| if (ret != 0) | |
| goto out; | |
| ret = csio_hw_sf1_write(hw, 4, 0, 1, | |
| SF_ERASE_SECTOR | (start << 8)); | |
| if (ret != 0) | |
| goto out; | |
| ret = csio_hw_flash_wait_op(hw, 14, 500); | |
| if (ret != 0) | |
| goto out; | |
| start++; | |
| } | |
| out: | |
| if (ret) | |
| csio_err(hw, "erase of flash sector %d failed, error %d\n", | |
| start, ret); | |
| csio_wr_reg32(hw, 0, SF_OP_A); /* unlock SF */ | |
| return 0; | |
| } | |
| static void | |
| csio_hw_print_fw_version(struct csio_hw *hw, char *str) | |
| { | |
| csio_info(hw, "%s: %u.%u.%u.%u\n", str, | |
| FW_HDR_FW_VER_MAJOR_G(hw->fwrev), | |
| FW_HDR_FW_VER_MINOR_G(hw->fwrev), | |
| FW_HDR_FW_VER_MICRO_G(hw->fwrev), | |
| FW_HDR_FW_VER_BUILD_G(hw->fwrev)); | |
| } | |
| /* | |
| * csio_hw_get_fw_version - read the firmware version | |
| * @hw: HW module | |
| * @vers: where to place the version | |
| * | |
| * Reads the FW version from flash. | |
| */ | |
| static int | |
| csio_hw_get_fw_version(struct csio_hw *hw, uint32_t *vers) | |
| { | |
| return csio_hw_read_flash(hw, FLASH_FW_START + | |
| offsetof(struct fw_hdr, fw_ver), 1, | |
| vers, 0); | |
| } | |
| /* | |
| * csio_hw_get_tp_version - read the TP microcode version | |
| * @hw: HW module | |
| * @vers: where to place the version | |
| * | |
| * Reads the TP microcode version from flash. | |
| */ | |
| static int | |
| csio_hw_get_tp_version(struct csio_hw *hw, u32 *vers) | |
| { | |
| return csio_hw_read_flash(hw, FLASH_FW_START + | |
| offsetof(struct fw_hdr, tp_microcode_ver), 1, | |
| vers, 0); | |
| } | |
| /* | |
| * csio_hw_fw_dload - download firmware. | |
| * @hw: HW module | |
| * @fw_data: firmware image to write. | |
| * @size: image size | |
| * | |
| * Write the supplied firmware image to the card's serial flash. | |
| */ | |
| static int | |
| csio_hw_fw_dload(struct csio_hw *hw, uint8_t *fw_data, uint32_t size) | |
| { | |
| uint32_t csum; | |
| int32_t addr; | |
| int ret; | |
| uint32_t i; | |
| uint8_t first_page[SF_PAGE_SIZE]; | |
| const __be32 *p = (const __be32 *)fw_data; | |
| struct fw_hdr *hdr = (struct fw_hdr *)fw_data; | |
| uint32_t sf_sec_size; | |
| if ((!hw->params.sf_size) || (!hw->params.sf_nsec)) { | |
| csio_err(hw, "Serial Flash data invalid\n"); | |
| return -EINVAL; | |
| } | |
| if (!size) { | |
| csio_err(hw, "FW image has no data\n"); | |
| return -EINVAL; | |
| } | |
| if (size & 511) { | |
| csio_err(hw, "FW image size not multiple of 512 bytes\n"); | |
| return -EINVAL; | |
| } | |
| if (ntohs(hdr->len512) * 512 != size) { | |
| csio_err(hw, "FW image size differs from size in FW header\n"); | |
| return -EINVAL; | |
| } | |
| if (size > FLASH_FW_MAX_SIZE) { | |
| csio_err(hw, "FW image too large, max is %u bytes\n", | |
| FLASH_FW_MAX_SIZE); | |
| return -EINVAL; | |
| } | |
| for (csum = 0, i = 0; i < size / sizeof(csum); i++) | |
| csum += ntohl(p[i]); | |
| if (csum != 0xffffffff) { | |
| csio_err(hw, "corrupted firmware image, checksum %#x\n", csum); | |
| return -EINVAL; | |
| } | |
| sf_sec_size = hw->params.sf_size / hw->params.sf_nsec; | |
| i = DIV_ROUND_UP(size, sf_sec_size); /* # of sectors spanned */ | |
| csio_dbg(hw, "Erasing sectors... start:%d end:%d\n", | |
| FLASH_FW_START_SEC, FLASH_FW_START_SEC + i - 1); | |
| ret = csio_hw_flash_erase_sectors(hw, FLASH_FW_START_SEC, | |
| FLASH_FW_START_SEC + i - 1); | |
| if (ret) { | |
| csio_err(hw, "Flash Erase failed\n"); | |
| goto out; | |
| } | |
| /* | |
| * We write the correct version at the end so the driver can see a bad | |
| * version if the FW write fails. Start by writing a copy of the | |
| * first page with a bad version. | |
| */ | |
| memcpy(first_page, fw_data, SF_PAGE_SIZE); | |
| ((struct fw_hdr *)first_page)->fw_ver = htonl(0xffffffff); | |
| ret = csio_hw_write_flash(hw, FLASH_FW_START, SF_PAGE_SIZE, first_page); | |
| if (ret) | |
| goto out; | |
| csio_dbg(hw, "Writing Flash .. start:%d end:%d\n", | |
| FW_IMG_START, FW_IMG_START + size); | |
| addr = FLASH_FW_START; | |
| for (size -= SF_PAGE_SIZE; size; size -= SF_PAGE_SIZE) { | |
| addr += SF_PAGE_SIZE; | |
| fw_data += SF_PAGE_SIZE; | |
| ret = csio_hw_write_flash(hw, addr, SF_PAGE_SIZE, fw_data); | |
| if (ret) | |
| goto out; | |
| } | |
| ret = csio_hw_write_flash(hw, | |
| FLASH_FW_START + | |
| offsetof(struct fw_hdr, fw_ver), | |
| sizeof(hdr->fw_ver), | |
| (const uint8_t *)&hdr->fw_ver); | |
| out: | |
| if (ret) | |
| csio_err(hw, "firmware download failed, error %d\n", ret); | |
| return ret; | |
| } | |
| static int | |
| csio_hw_get_flash_params(struct csio_hw *hw) | |
| { | |
| int ret; | |
| uint32_t info = 0; | |
| ret = csio_hw_sf1_write(hw, 1, 1, 0, SF_RD_ID); | |
| if (!ret) | |
| ret = csio_hw_sf1_read(hw, 3, 0, 1, &info); | |
| csio_wr_reg32(hw, 0, SF_OP_A); /* unlock SF */ | |
| if (ret != 0) | |
| return ret; | |
| if ((info & 0xff) != 0x20) /* not a Numonix flash */ | |
| return -EINVAL; | |
| info >>= 16; /* log2 of size */ | |
| if (info >= 0x14 && info < 0x18) | |
| hw->params.sf_nsec = 1 << (info - 16); | |
| else if (info == 0x18) | |
| hw->params.sf_nsec = 64; | |
| else | |
| return -EINVAL; | |
| hw->params.sf_size = 1 << info; | |
| return 0; | |
| } | |
| /*****************************************************************************/ | |
| /* HW State machine assists */ | |
| /*****************************************************************************/ | |
| static int | |
| csio_hw_dev_ready(struct csio_hw *hw) | |
| { | |
| uint32_t reg; | |
| int cnt = 6; | |
| while (((reg = csio_rd_reg32(hw, PL_WHOAMI_A)) == 0xFFFFFFFF) && | |
| (--cnt != 0)) | |
| mdelay(100); | |
| if ((cnt == 0) && (((int32_t)(SOURCEPF_G(reg)) < 0) || | |
| (SOURCEPF_G(reg) >= CSIO_MAX_PFN))) { | |
| csio_err(hw, "PL_WHOAMI returned 0x%x, cnt:%d\n", reg, cnt); | |
| return -EIO; | |
| } | |
| hw->pfn = SOURCEPF_G(reg); | |
| return 0; | |
| } | |
| /* | |
| * csio_do_hello - Perform the HELLO FW Mailbox command and process response. | |
| * @hw: HW module | |
| * @state: Device state | |
| * | |
| * FW_HELLO_CMD has to be polled for completion. | |
| */ | |
| static int | |
| csio_do_hello(struct csio_hw *hw, enum csio_dev_state *state) | |
| { | |
| struct csio_mb *mbp; | |
| int rv = 0; | |
| enum fw_retval retval; | |
| uint8_t mpfn; | |
| char state_str[16]; | |
| int retries = FW_CMD_HELLO_RETRIES; | |
| memset(state_str, 0, sizeof(state_str)); | |
| mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); | |
| if (!mbp) { | |
| rv = -ENOMEM; | |
| CSIO_INC_STATS(hw, n_err_nomem); | |
| goto out; | |
| } | |
| retry: | |
| csio_mb_hello(hw, mbp, CSIO_MB_DEFAULT_TMO, hw->pfn, | |
| hw->pfn, CSIO_MASTER_MAY, NULL); | |
| rv = csio_mb_issue(hw, mbp); | |
| if (rv) { | |
| csio_err(hw, "failed to issue HELLO cmd. ret:%d.\n", rv); | |
| goto out_free_mb; | |
| } | |
| csio_mb_process_hello_rsp(hw, mbp, &retval, state, &mpfn); | |
| if (retval != FW_SUCCESS) { | |
| csio_err(hw, "HELLO cmd failed with ret: %d\n", retval); | |
| rv = -EINVAL; | |
| goto out_free_mb; | |
| } | |
| /* Firmware has designated us to be master */ | |
| if (hw->pfn == mpfn) { | |
| hw->flags |= CSIO_HWF_MASTER; | |
| } else if (*state == CSIO_DEV_STATE_UNINIT) { | |
| /* | |
| * If we're not the Master PF then we need to wait around for | |
| * the Master PF Driver to finish setting up the adapter. | |
| * | |
| * Note that we also do this wait if we're a non-Master-capable | |
| * PF and there is no current Master PF; a Master PF may show up | |
| * momentarily and we wouldn't want to fail pointlessly. (This | |
| * can happen when an OS loads lots of different drivers rapidly | |
| * at the same time). In this case, the Master PF returned by | |
| * the firmware will be PCIE_FW_MASTER_MASK so the test below | |
| * will work ... | |
| */ | |
| int waiting = FW_CMD_HELLO_TIMEOUT; | |
| /* | |
| * Wait for the firmware to either indicate an error or | |
| * initialized state. If we see either of these we bail out | |
| * and report the issue to the caller. If we exhaust the | |
| * "hello timeout" and we haven't exhausted our retries, try | |
| * again. Otherwise bail with a timeout error. | |
| */ | |
| for (;;) { | |
| uint32_t pcie_fw; | |
| spin_unlock_irq(&hw->lock); | |
| msleep(50); | |
| spin_lock_irq(&hw->lock); | |
| waiting -= 50; | |
| /* | |
| * If neither Error nor Initialialized are indicated | |
| * by the firmware keep waiting till we exaust our | |
| * timeout ... and then retry if we haven't exhausted | |
| * our retries ... | |
| */ | |
| pcie_fw = csio_rd_reg32(hw, PCIE_FW_A); | |
| if (!(pcie_fw & (PCIE_FW_ERR_F|PCIE_FW_INIT_F))) { | |
| if (waiting <= 0) { | |
| if (retries-- > 0) | |
| goto retry; | |
| rv = -ETIMEDOUT; | |
| break; | |
| } | |
| continue; | |
| } | |
| /* | |
| * We either have an Error or Initialized condition | |
| * report errors preferentially. | |
| */ | |
| if (state) { | |
| if (pcie_fw & PCIE_FW_ERR_F) { | |
| *state = CSIO_DEV_STATE_ERR; | |
| rv = -ETIMEDOUT; | |
| } else if (pcie_fw & PCIE_FW_INIT_F) | |
| *state = CSIO_DEV_STATE_INIT; | |
| } | |
| /* | |
| * If we arrived before a Master PF was selected and | |
| * there's not a valid Master PF, grab its identity | |
| * for our caller. | |
| */ | |
| if (mpfn == PCIE_FW_MASTER_M && | |
| (pcie_fw & PCIE_FW_MASTER_VLD_F)) | |
| mpfn = PCIE_FW_MASTER_G(pcie_fw); | |
| break; | |
| } | |
| hw->flags &= ~CSIO_HWF_MASTER; | |
| } | |
| switch (*state) { | |
| case CSIO_DEV_STATE_UNINIT: | |
| strcpy(state_str, "Initializing"); | |
| break; | |
| case CSIO_DEV_STATE_INIT: | |
| strcpy(state_str, "Initialized"); | |
| break; | |
| case CSIO_DEV_STATE_ERR: | |
| strcpy(state_str, "Error"); | |
| break; | |
| default: | |
| strcpy(state_str, "Unknown"); | |
| break; | |
| } | |
| if (hw->pfn == mpfn) | |
| csio_info(hw, "PF: %d, Coming up as MASTER, HW state: %s\n", | |
| hw->pfn, state_str); | |
| else | |
| csio_info(hw, | |
| "PF: %d, Coming up as SLAVE, Master PF: %d, HW state: %s\n", | |
| hw->pfn, mpfn, state_str); | |
| out_free_mb: | |
| mempool_free(mbp, hw->mb_mempool); | |
| out: | |
| return rv; | |
| } | |
| /* | |
| * csio_do_bye - Perform the BYE FW Mailbox command and process response. | |
| * @hw: HW module | |
| * | |
| */ | |
| static int | |
| csio_do_bye(struct csio_hw *hw) | |
| { | |
| struct csio_mb *mbp; | |
| enum fw_retval retval; | |
| mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); | |
| if (!mbp) { | |
| CSIO_INC_STATS(hw, n_err_nomem); | |
| return -ENOMEM; | |
| } | |
| csio_mb_bye(hw, mbp, CSIO_MB_DEFAULT_TMO, NULL); | |
| if (csio_mb_issue(hw, mbp)) { | |
| csio_err(hw, "Issue of BYE command failed\n"); | |
| mempool_free(mbp, hw->mb_mempool); | |
| return -EINVAL; | |
| } | |
| retval = csio_mb_fw_retval(mbp); | |
| if (retval != FW_SUCCESS) { | |
| mempool_free(mbp, hw->mb_mempool); | |
| return -EINVAL; | |
| } | |
| mempool_free(mbp, hw->mb_mempool); | |
| return 0; | |
| } | |
| /* | |
| * csio_do_reset- Perform the device reset. | |
| * @hw: HW module | |
| * @fw_rst: FW reset | |
| * | |
| * If fw_rst is set, issues FW reset mbox cmd otherwise | |
| * does PIO reset. | |
| * Performs reset of the function. | |
| */ | |
| static int | |
| csio_do_reset(struct csio_hw *hw, bool fw_rst) | |
| { | |
| struct csio_mb *mbp; | |
| enum fw_retval retval; | |
| if (!fw_rst) { | |
| /* PIO reset */ | |
| csio_wr_reg32(hw, PIORSTMODE_F | PIORST_F, PL_RST_A); | |
| mdelay(2000); | |
| return 0; | |
| } | |
| mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); | |
| if (!mbp) { | |
| CSIO_INC_STATS(hw, n_err_nomem); | |
| return -ENOMEM; | |
| } | |
| csio_mb_reset(hw, mbp, CSIO_MB_DEFAULT_TMO, | |
| PIORSTMODE_F | PIORST_F, 0, NULL); | |
| if (csio_mb_issue(hw, mbp)) { | |
| csio_err(hw, "Issue of RESET command failed.n"); | |
| mempool_free(mbp, hw->mb_mempool); | |
| return -EINVAL; | |
| } | |
| retval = csio_mb_fw_retval(mbp); | |
| if (retval != FW_SUCCESS) { | |
| csio_err(hw, "RESET cmd failed with ret:0x%x.\n", retval); | |
| mempool_free(mbp, hw->mb_mempool); | |
| return -EINVAL; | |
| } | |
| mempool_free(mbp, hw->mb_mempool); | |
| return 0; | |
| } | |
| static int | |
| csio_hw_validate_caps(struct csio_hw *hw, struct csio_mb *mbp) | |
| { | |
| struct fw_caps_config_cmd *rsp = (struct fw_caps_config_cmd *)mbp->mb; | |
| uint16_t caps; | |
| caps = ntohs(rsp->fcoecaps); | |
| if (!(caps & FW_CAPS_CONFIG_FCOE_INITIATOR)) { | |
| csio_err(hw, "No FCoE Initiator capability in the firmware.\n"); | |
| return -EINVAL; | |
| } | |
| if (!(caps & FW_CAPS_CONFIG_FCOE_CTRL_OFLD)) { | |
| csio_err(hw, "No FCoE Control Offload capability\n"); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * csio_hw_fw_halt - issue a reset/halt to FW and put uP into RESET | |
| * @hw: the HW module | |
| * @mbox: mailbox to use for the FW RESET command (if desired) | |
| * @force: force uP into RESET even if FW RESET command fails | |
| * | |
| * Issues a RESET command to firmware (if desired) with a HALT indication | |
| * and then puts the microprocessor into RESET state. The RESET command | |
| * will only be issued if a legitimate mailbox is provided (mbox <= | |
| * PCIE_FW_MASTER_MASK). | |
| * | |
| * This is generally used in order for the host to safely manipulate the | |
| * adapter without fear of conflicting with whatever the firmware might | |
| * be doing. The only way out of this state is to RESTART the firmware | |
| * ... | |
| */ | |
| static int | |
| csio_hw_fw_halt(struct csio_hw *hw, uint32_t mbox, int32_t force) | |
| { | |
| enum fw_retval retval = 0; | |
| /* | |
| * If a legitimate mailbox is provided, issue a RESET command | |
| * with a HALT indication. | |
| */ | |
| if (mbox <= PCIE_FW_MASTER_M) { | |
| struct csio_mb *mbp; | |
| mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); | |
| if (!mbp) { | |
| CSIO_INC_STATS(hw, n_err_nomem); | |
| return -ENOMEM; | |
| } | |
| csio_mb_reset(hw, mbp, CSIO_MB_DEFAULT_TMO, | |
| PIORSTMODE_F | PIORST_F, FW_RESET_CMD_HALT_F, | |
| NULL); | |
| if (csio_mb_issue(hw, mbp)) { | |
| csio_err(hw, "Issue of RESET command failed!\n"); | |
| mempool_free(mbp, hw->mb_mempool); | |
| return -EINVAL; | |
| } | |
| retval = csio_mb_fw_retval(mbp); | |
| mempool_free(mbp, hw->mb_mempool); | |
| } | |
| /* | |
| * Normally we won't complete the operation if the firmware RESET | |
| * command fails but if our caller insists we'll go ahead and put the | |
| * uP into RESET. This can be useful if the firmware is hung or even | |
| * missing ... We'll have to take the risk of putting the uP into | |
| * RESET without the cooperation of firmware in that case. | |
| * | |
| * We also force the firmware's HALT flag to be on in case we bypassed | |
| * the firmware RESET command above or we're dealing with old firmware | |
| * which doesn't have the HALT capability. This will serve as a flag | |
| * for the incoming firmware to know that it's coming out of a HALT | |
| * rather than a RESET ... if it's new enough to understand that ... | |
| */ | |
| if (retval == 0 || force) { | |
| csio_set_reg_field(hw, CIM_BOOT_CFG_A, UPCRST_F, UPCRST_F); | |
| csio_set_reg_field(hw, PCIE_FW_A, PCIE_FW_HALT_F, | |
| PCIE_FW_HALT_F); | |
| } | |
| /* | |
| * And we always return the result of the firmware RESET command | |
| * even when we force the uP into RESET ... | |
| */ | |
| return retval ? -EINVAL : 0; | |
| } | |
| /* | |
| * csio_hw_fw_restart - restart the firmware by taking the uP out of RESET | |
| * @hw: the HW module | |
| * @reset: if we want to do a RESET to restart things | |
| * | |
| * Restart firmware previously halted by csio_hw_fw_halt(). On successful | |
| * return the previous PF Master remains as the new PF Master and there | |
| * is no need to issue a new HELLO command, etc. | |
| * | |
| * We do this in two ways: | |
| * | |
| * 1. If we're dealing with newer firmware we'll simply want to take | |
| * the chip's microprocessor out of RESET. This will cause the | |
| * firmware to start up from its start vector. And then we'll loop | |
| * until the firmware indicates it's started again (PCIE_FW.HALT | |
| * reset to 0) or we timeout. | |
| * | |
| * 2. If we're dealing with older firmware then we'll need to RESET | |
| * the chip since older firmware won't recognize the PCIE_FW.HALT | |
| * flag and automatically RESET itself on startup. | |
| */ | |
| static int | |
| csio_hw_fw_restart(struct csio_hw *hw, uint32_t mbox, int32_t reset) | |
| { | |
| if (reset) { | |
| /* | |
| * Since we're directing the RESET instead of the firmware | |
| * doing it automatically, we need to clear the PCIE_FW.HALT | |
| * bit. | |
| */ | |
| csio_set_reg_field(hw, PCIE_FW_A, PCIE_FW_HALT_F, 0); | |
| /* | |
| * If we've been given a valid mailbox, first try to get the | |
| * firmware to do the RESET. If that works, great and we can | |
| * return success. Otherwise, if we haven't been given a | |
| * valid mailbox or the RESET command failed, fall back to | |
| * hitting the chip with a hammer. | |
| */ | |
| if (mbox <= PCIE_FW_MASTER_M) { | |
| csio_set_reg_field(hw, CIM_BOOT_CFG_A, UPCRST_F, 0); | |
| msleep(100); | |
| if (csio_do_reset(hw, true) == 0) | |
| return 0; | |
| } | |
| csio_wr_reg32(hw, PIORSTMODE_F | PIORST_F, PL_RST_A); | |
| msleep(2000); | |
| } else { | |
| int ms; | |
| csio_set_reg_field(hw, CIM_BOOT_CFG_A, UPCRST_F, 0); | |
| for (ms = 0; ms < FW_CMD_MAX_TIMEOUT; ) { | |
| if (!(csio_rd_reg32(hw, PCIE_FW_A) & PCIE_FW_HALT_F)) | |
| return 0; | |
| msleep(100); | |
| ms += 100; | |
| } | |
| return -ETIMEDOUT; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * csio_hw_fw_upgrade - perform all of the steps necessary to upgrade FW | |
| * @hw: the HW module | |
| * @mbox: mailbox to use for the FW RESET command (if desired) | |
| * @fw_data: the firmware image to write | |
| * @size: image size | |
| * @force: force upgrade even if firmware doesn't cooperate | |
| * | |
| * Perform all of the steps necessary for upgrading an adapter's | |
| * firmware image. Normally this requires the cooperation of the | |
| * existing firmware in order to halt all existing activities | |
| * but if an invalid mailbox token is passed in we skip that step | |
| * (though we'll still put the adapter microprocessor into RESET in | |
| * that case). | |
| * | |
| * On successful return the new firmware will have been loaded and | |
| * the adapter will have been fully RESET losing all previous setup | |
| * state. On unsuccessful return the adapter may be completely hosed ... | |
| * positive errno indicates that the adapter is ~probably~ intact, a | |
| * negative errno indicates that things are looking bad ... | |
| */ | |
| static int | |
| csio_hw_fw_upgrade(struct csio_hw *hw, uint32_t mbox, | |
| const u8 *fw_data, uint32_t size, int32_t force) | |
| { | |
| const struct fw_hdr *fw_hdr = (const struct fw_hdr *)fw_data; | |
| int reset, ret; | |
| ret = csio_hw_fw_halt(hw, mbox, force); | |
| if (ret != 0 && !force) | |
| return ret; | |
| ret = csio_hw_fw_dload(hw, (uint8_t *) fw_data, size); | |
| if (ret != 0) | |
| return ret; | |
| /* | |
| * Older versions of the firmware don't understand the new | |
| * PCIE_FW.HALT flag and so won't know to perform a RESET when they | |
| * restart. So for newly loaded older firmware we'll have to do the | |
| * RESET for it so it starts up on a clean slate. We can tell if | |
| * the newly loaded firmware will handle this right by checking | |
| * its header flags to see if it advertises the capability. | |
| */ | |
| reset = ((ntohl(fw_hdr->flags) & FW_HDR_FLAGS_RESET_HALT) == 0); | |
| return csio_hw_fw_restart(hw, mbox, reset); | |
| } | |
| /* | |
| * csio_get_device_params - Get device parameters. | |
| * @hw: HW module | |
| * | |
| */ | |
| static int | |
| csio_get_device_params(struct csio_hw *hw) | |
| { | |
| struct csio_wrm *wrm = csio_hw_to_wrm(hw); | |
| struct csio_mb *mbp; | |
| enum fw_retval retval; | |
| u32 param[6]; | |
| int i, j = 0; | |
| /* Initialize portids to -1 */ | |
| for (i = 0; i < CSIO_MAX_PPORTS; i++) | |
| hw->pport[i].portid = -1; | |
| mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); | |
| if (!mbp) { | |
| CSIO_INC_STATS(hw, n_err_nomem); | |
| return -ENOMEM; | |
| } | |
| /* Get port vec information. */ | |
| param[0] = FW_PARAM_DEV(PORTVEC); | |
| /* Get Core clock. */ | |
| param[1] = FW_PARAM_DEV(CCLK); | |
| /* Get EQ id start and end. */ | |
| param[2] = FW_PARAM_PFVF(EQ_START); | |
| param[3] = FW_PARAM_PFVF(EQ_END); | |
| /* Get IQ id start and end. */ | |
| param[4] = FW_PARAM_PFVF(IQFLINT_START); | |
| param[5] = FW_PARAM_PFVF(IQFLINT_END); | |
| csio_mb_params(hw, mbp, CSIO_MB_DEFAULT_TMO, hw->pfn, 0, | |
| ARRAY_SIZE(param), param, NULL, false, NULL); | |
| if (csio_mb_issue(hw, mbp)) { | |
| csio_err(hw, "Issue of FW_PARAMS_CMD(read) failed!\n"); | |
| mempool_free(mbp, hw->mb_mempool); | |
| return -EINVAL; | |
| } | |
| csio_mb_process_read_params_rsp(hw, mbp, &retval, | |
| ARRAY_SIZE(param), param); | |
| if (retval != FW_SUCCESS) { | |
| csio_err(hw, "FW_PARAMS_CMD(read) failed with ret:0x%x!\n", | |
| retval); | |
| mempool_free(mbp, hw->mb_mempool); | |
| return -EINVAL; | |
| } | |
| /* cache the information. */ | |
| hw->port_vec = param[0]; | |
| hw->vpd.cclk = param[1]; | |
| wrm->fw_eq_start = param[2]; | |
| wrm->fw_iq_start = param[4]; | |
| /* Using FW configured max iqs & eqs */ | |
| if ((hw->flags & CSIO_HWF_USING_SOFT_PARAMS) || | |
| !csio_is_hw_master(hw)) { | |
| hw->cfg_niq = param[5] - param[4] + 1; | |
| hw->cfg_neq = param[3] - param[2] + 1; | |
| csio_dbg(hw, "Using fwconfig max niqs %d neqs %d\n", | |
| hw->cfg_niq, hw->cfg_neq); | |
| } | |
| hw->port_vec &= csio_port_mask; | |
| hw->num_pports = hweight32(hw->port_vec); | |
| csio_dbg(hw, "Port vector: 0x%x, #ports: %d\n", | |
| hw->port_vec, hw->num_pports); | |
| for (i = 0; i < hw->num_pports; i++) { | |
| while ((hw->port_vec & (1 << j)) == 0) | |
| j++; | |
| hw->pport[i].portid = j++; | |
| csio_dbg(hw, "Found Port:%d\n", hw->pport[i].portid); | |
| } | |
| mempool_free(mbp, hw->mb_mempool); | |
| return 0; | |
| } | |
| /* | |
| * csio_config_device_caps - Get and set device capabilities. | |
| * @hw: HW module | |
| * | |
| */ | |
| static int | |
| csio_config_device_caps(struct csio_hw *hw) | |
| { | |
| struct csio_mb *mbp; | |
| enum fw_retval retval; | |
| int rv = -EINVAL; | |
| mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); | |
| if (!mbp) { | |
| CSIO_INC_STATS(hw, n_err_nomem); | |
| return -ENOMEM; | |
| } | |
| /* Get device capabilities */ | |
| csio_mb_caps_config(hw, mbp, CSIO_MB_DEFAULT_TMO, 0, 0, 0, 0, NULL); | |
| if (csio_mb_issue(hw, mbp)) { | |
| csio_err(hw, "Issue of FW_CAPS_CONFIG_CMD(r) failed!\n"); | |
| goto out; | |
| } | |
| retval = csio_mb_fw_retval(mbp); | |
| if (retval != FW_SUCCESS) { | |
| csio_err(hw, "FW_CAPS_CONFIG_CMD(r) returned %d!\n", retval); | |
| goto out; | |
| } | |
| /* Validate device capabilities */ | |
| rv = csio_hw_validate_caps(hw, mbp); | |
| if (rv != 0) | |
| goto out; | |
| /* Don't config device capabilities if already configured */ | |
| if (hw->fw_state == CSIO_DEV_STATE_INIT) { | |
| rv = 0; | |
| goto out; | |
| } | |
| /* Write back desired device capabilities */ | |
| csio_mb_caps_config(hw, mbp, CSIO_MB_DEFAULT_TMO, true, true, | |
| false, true, NULL); | |
| if (csio_mb_issue(hw, mbp)) { | |
| csio_err(hw, "Issue of FW_CAPS_CONFIG_CMD(w) failed!\n"); | |
| goto out; | |
| } | |
| retval = csio_mb_fw_retval(mbp); | |
| if (retval != FW_SUCCESS) { | |
| csio_err(hw, "FW_CAPS_CONFIG_CMD(w) returned %d!\n", retval); | |
| goto out; | |
| } | |
| rv = 0; | |
| out: | |
| mempool_free(mbp, hw->mb_mempool); | |
| return rv; | |
| } | |
| /* | |
| * csio_enable_ports - Bring up all available ports. | |
| * @hw: HW module. | |
| * | |
| */ | |
| static int | |
| csio_enable_ports(struct csio_hw *hw) | |
| { | |
| struct csio_mb *mbp; | |
| enum fw_retval retval; | |
| uint8_t portid; | |
| int i; | |
| mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); | |
| if (!mbp) { | |
| CSIO_INC_STATS(hw, n_err_nomem); | |
| return -ENOMEM; | |
| } | |
| for (i = 0; i < hw->num_pports; i++) { | |
| portid = hw->pport[i].portid; | |
| /* Read PORT information */ | |
| csio_mb_port(hw, mbp, CSIO_MB_DEFAULT_TMO, portid, | |
| false, 0, 0, NULL); | |
| if (csio_mb_issue(hw, mbp)) { | |
| csio_err(hw, "failed to issue FW_PORT_CMD(r) port:%d\n", | |
| portid); | |
| mempool_free(mbp, hw->mb_mempool); | |
| return -EINVAL; | |
| } | |
| csio_mb_process_read_port_rsp(hw, mbp, &retval, | |
| &hw->pport[i].pcap); | |
| if (retval != FW_SUCCESS) { | |
| csio_err(hw, "FW_PORT_CMD(r) port:%d failed: 0x%x\n", | |
| portid, retval); | |
| mempool_free(mbp, hw->mb_mempool); | |
| return -EINVAL; | |
| } | |
| /* Write back PORT information */ | |
| csio_mb_port(hw, mbp, CSIO_MB_DEFAULT_TMO, portid, true, | |
| (PAUSE_RX | PAUSE_TX), hw->pport[i].pcap, NULL); | |
| if (csio_mb_issue(hw, mbp)) { | |
| csio_err(hw, "failed to issue FW_PORT_CMD(w) port:%d\n", | |
| portid); | |
| mempool_free(mbp, hw->mb_mempool); | |
| return -EINVAL; | |
| } | |
| retval = csio_mb_fw_retval(mbp); | |
| if (retval != FW_SUCCESS) { | |
| csio_err(hw, "FW_PORT_CMD(w) port:%d failed :0x%x\n", | |
| portid, retval); | |
| mempool_free(mbp, hw->mb_mempool); | |
| return -EINVAL; | |
| } | |
| } /* For all ports */ | |
| mempool_free(mbp, hw->mb_mempool); | |
| return 0; | |
| } | |
| /* | |
| * csio_get_fcoe_resinfo - Read fcoe fw resource info. | |
| * @hw: HW module | |
| * Issued with lock held. | |
| */ | |
| static int | |
| csio_get_fcoe_resinfo(struct csio_hw *hw) | |
| { | |
| struct csio_fcoe_res_info *res_info = &hw->fres_info; | |
| struct fw_fcoe_res_info_cmd *rsp; | |
| struct csio_mb *mbp; | |
| enum fw_retval retval; | |
| mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); | |
| if (!mbp) { | |
| CSIO_INC_STATS(hw, n_err_nomem); | |
| return -ENOMEM; | |
| } | |
| /* Get FCoE FW resource information */ | |
| csio_fcoe_read_res_info_init_mb(hw, mbp, CSIO_MB_DEFAULT_TMO, NULL); | |
| if (csio_mb_issue(hw, mbp)) { | |
| csio_err(hw, "failed to issue FW_FCOE_RES_INFO_CMD\n"); | |
| mempool_free(mbp, hw->mb_mempool); | |
| return -EINVAL; | |
| } | |
| rsp = (struct fw_fcoe_res_info_cmd *)(mbp->mb); | |
| retval = FW_CMD_RETVAL_G(ntohl(rsp->retval_len16)); | |
| if (retval != FW_SUCCESS) { | |
| csio_err(hw, "FW_FCOE_RES_INFO_CMD failed with ret x%x\n", | |
| retval); | |
| mempool_free(mbp, hw->mb_mempool); | |
| return -EINVAL; | |
| } | |
| res_info->e_d_tov = ntohs(rsp->e_d_tov); | |
| res_info->r_a_tov_seq = ntohs(rsp->r_a_tov_seq); | |
| res_info->r_a_tov_els = ntohs(rsp->r_a_tov_els); | |
| res_info->r_r_tov = ntohs(rsp->r_r_tov); | |
| res_info->max_xchgs = ntohl(rsp->max_xchgs); | |
| res_info->max_ssns = ntohl(rsp->max_ssns); | |
| res_info->used_xchgs = ntohl(rsp->used_xchgs); | |
| res_info->used_ssns = ntohl(rsp->used_ssns); | |
| res_info->max_fcfs = ntohl(rsp->max_fcfs); | |
| res_info->max_vnps = ntohl(rsp->max_vnps); | |
| res_info->used_fcfs = ntohl(rsp->used_fcfs); | |
| res_info->used_vnps = ntohl(rsp->used_vnps); | |
| csio_dbg(hw, "max ssns:%d max xchgs:%d\n", res_info->max_ssns, | |
| res_info->max_xchgs); | |
| mempool_free(mbp, hw->mb_mempool); | |
| return 0; | |
| } | |
| static int | |
| csio_hw_check_fwconfig(struct csio_hw *hw, u32 *param) | |
| { | |
| struct csio_mb *mbp; | |
| enum fw_retval retval; | |
| u32 _param[1]; | |
| mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); | |
| if (!mbp) { | |
| CSIO_INC_STATS(hw, n_err_nomem); | |
| return -ENOMEM; | |
| } | |
| /* | |
| * Find out whether we're dealing with a version of | |
| * the firmware which has configuration file support. | |
| */ | |
| _param[0] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) | | |
| FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_CF)); | |
| csio_mb_params(hw, mbp, CSIO_MB_DEFAULT_TMO, hw->pfn, 0, | |
| ARRAY_SIZE(_param), _param, NULL, false, NULL); | |
| if (csio_mb_issue(hw, mbp)) { | |
| csio_err(hw, "Issue of FW_PARAMS_CMD(read) failed!\n"); | |
| mempool_free(mbp, hw->mb_mempool); | |
| return -EINVAL; | |
| } | |
| csio_mb_process_read_params_rsp(hw, mbp, &retval, | |
| ARRAY_SIZE(_param), _param); | |
| if (retval != FW_SUCCESS) { | |
| csio_err(hw, "FW_PARAMS_CMD(read) failed with ret:0x%x!\n", | |
| retval); | |
| mempool_free(mbp, hw->mb_mempool); | |
| return -EINVAL; | |
| } | |
| mempool_free(mbp, hw->mb_mempool); | |
| *param = _param[0]; | |
| return 0; | |
| } | |
| static int | |
| csio_hw_flash_config(struct csio_hw *hw, u32 *fw_cfg_param, char *path) | |
| { | |
| int ret = 0; | |
| const struct firmware *cf; | |
| struct pci_dev *pci_dev = hw->pdev; | |
| struct device *dev = &pci_dev->dev; | |
| unsigned int mtype = 0, maddr = 0; | |
| uint32_t *cfg_data; | |
| int value_to_add = 0; | |
| if (request_firmware(&cf, FW_CFG_NAME_T5, dev) < 0) { | |
| csio_err(hw, "could not find config file %s, err: %d\n", | |
| FW_CFG_NAME_T5, ret); | |
| return -ENOENT; | |
| } | |
| if (cf->size%4 != 0) | |
| value_to_add = 4 - (cf->size % 4); | |
| cfg_data = kzalloc(cf->size+value_to_add, GFP_KERNEL); | |
| if (cfg_data == NULL) { | |
| ret = -ENOMEM; | |
| goto leave; | |
| } | |
| memcpy((void *)cfg_data, (const void *)cf->data, cf->size); | |
| if (csio_hw_check_fwconfig(hw, fw_cfg_param) != 0) { | |
| ret = -EINVAL; | |
| goto leave; | |
| } | |
| mtype = FW_PARAMS_PARAM_Y_G(*fw_cfg_param); | |
| maddr = FW_PARAMS_PARAM_Z_G(*fw_cfg_param) << 16; | |
| ret = csio_memory_write(hw, mtype, maddr, | |
| cf->size + value_to_add, cfg_data); | |
| if ((ret == 0) && (value_to_add != 0)) { | |
| union { | |
| u32 word; | |
| char buf[4]; | |
| } last; | |
| size_t size = cf->size & ~0x3; | |
| int i; | |
| last.word = cfg_data[size >> 2]; | |
| for (i = value_to_add; i < 4; i++) | |
| last.buf[i] = 0; | |
| ret = csio_memory_write(hw, mtype, maddr + size, 4, &last.word); | |
| } | |
| if (ret == 0) { | |
| csio_info(hw, "config file upgraded to %s\n", | |
| FW_CFG_NAME_T5); | |
| snprintf(path, 64, "%s%s", "/lib/firmware/", FW_CFG_NAME_T5); | |
| } | |
| leave: | |
| kfree(cfg_data); | |
| release_firmware(cf); | |
| return ret; | |
| } | |
| /* | |
| * HW initialization: contact FW, obtain config, perform basic init. | |
| * | |
| * If the firmware we're dealing with has Configuration File support, then | |
| * we use that to perform all configuration -- either using the configuration | |
| * file stored in flash on the adapter or using a filesystem-local file | |
| * if available. | |
| * | |
| * If we don't have configuration file support in the firmware, then we'll | |
| * have to set things up the old fashioned way with hard-coded register | |
| * writes and firmware commands ... | |
| */ | |
| /* | |
| * Attempt to initialize the HW via a Firmware Configuration File. | |
| */ | |
| static int | |
| csio_hw_use_fwconfig(struct csio_hw *hw, int reset, u32 *fw_cfg_param) | |
| { | |
| struct csio_mb *mbp = NULL; | |
| struct fw_caps_config_cmd *caps_cmd; | |
| unsigned int mtype, maddr; | |
| int rv = -EINVAL; | |
| uint32_t finiver = 0, finicsum = 0, cfcsum = 0; | |
| char path[64]; | |
| char *config_name = NULL; | |
| /* | |
| * Reset device if necessary | |
| */ | |
| if (reset) { | |
| rv = csio_do_reset(hw, true); | |
| if (rv != 0) | |
| goto bye; | |
| } | |
| /* | |
| * If we have a configuration file in host , | |
| * then use that. Otherwise, use the configuration file stored | |
| * in the HW flash ... | |
| */ | |
| spin_unlock_irq(&hw->lock); | |
| rv = csio_hw_flash_config(hw, fw_cfg_param, path); | |
| spin_lock_irq(&hw->lock); | |
| if (rv != 0) { | |
| /* | |
| * config file was not found. Use default | |
| * config file from flash. | |
| */ | |
| config_name = "On FLASH"; | |
| mtype = FW_MEMTYPE_CF_FLASH; | |
| maddr = hw->chip_ops->chip_flash_cfg_addr(hw); | |
| } else { | |
| config_name = path; | |
| mtype = FW_PARAMS_PARAM_Y_G(*fw_cfg_param); | |
| maddr = FW_PARAMS_PARAM_Z_G(*fw_cfg_param) << 16; | |
| } | |
| mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); | |
| if (!mbp) { | |
| CSIO_INC_STATS(hw, n_err_nomem); | |
| return -ENOMEM; | |
| } | |
| /* | |
| * Tell the firmware to process the indicated Configuration File. | |
| * If there are no errors and the caller has provided return value | |
| * pointers for the [fini] section version, checksum and computed | |
| * checksum, pass those back to the caller. | |
| */ | |
| caps_cmd = (struct fw_caps_config_cmd *)(mbp->mb); | |
| CSIO_INIT_MBP(mbp, caps_cmd, CSIO_MB_DEFAULT_TMO, hw, NULL, 1); | |
| caps_cmd->op_to_write = | |
| htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) | | |
| FW_CMD_REQUEST_F | | |
| FW_CMD_READ_F); | |
| caps_cmd->cfvalid_to_len16 = | |
| htonl(FW_CAPS_CONFIG_CMD_CFVALID_F | | |
| FW_CAPS_CONFIG_CMD_MEMTYPE_CF_V(mtype) | | |
| FW_CAPS_CONFIG_CMD_MEMADDR64K_CF_V(maddr >> 16) | | |
| FW_LEN16(*caps_cmd)); | |
| if (csio_mb_issue(hw, mbp)) { | |
| rv = -EINVAL; | |
| goto bye; | |
| } | |
| rv = csio_mb_fw_retval(mbp); | |
| /* If the CAPS_CONFIG failed with an ENOENT (for a Firmware | |
| * Configuration File in FLASH), our last gasp effort is to use the | |
| * Firmware Configuration File which is embedded in the | |
| * firmware. A very few early versions of the firmware didn't | |
| * have one embedded but we can ignore those. | |
| */ | |
| if (rv == ENOENT) { | |
| CSIO_INIT_MBP(mbp, caps_cmd, CSIO_MB_DEFAULT_TMO, hw, NULL, 1); | |
| caps_cmd->op_to_write = htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) | | |
| FW_CMD_REQUEST_F | | |
| FW_CMD_READ_F); | |
| caps_cmd->cfvalid_to_len16 = htonl(FW_LEN16(*caps_cmd)); | |
| if (csio_mb_issue(hw, mbp)) { | |
| rv = -EINVAL; | |
| goto bye; | |
| } | |
| rv = csio_mb_fw_retval(mbp); | |
| config_name = "Firmware Default"; | |
| } | |
| if (rv != FW_SUCCESS) | |
| goto bye; | |
| finiver = ntohl(caps_cmd->finiver); | |
| finicsum = ntohl(caps_cmd->finicsum); | |
| cfcsum = ntohl(caps_cmd->cfcsum); | |
| /* | |
| * And now tell the firmware to use the configuration we just loaded. | |
| */ | |
| caps_cmd->op_to_write = | |
| htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) | | |
| FW_CMD_REQUEST_F | | |
| FW_CMD_WRITE_F); | |
| caps_cmd->cfvalid_to_len16 = htonl(FW_LEN16(*caps_cmd)); | |
| if (csio_mb_issue(hw, mbp)) { | |
| rv = -EINVAL; | |
| goto bye; | |
| } | |
| rv = csio_mb_fw_retval(mbp); | |
| if (rv != FW_SUCCESS) { | |
| csio_dbg(hw, "FW_CAPS_CONFIG_CMD returned %d!\n", rv); | |
| goto bye; | |
| } | |
| mempool_free(mbp, hw->mb_mempool); | |
| if (finicsum != cfcsum) { | |
| csio_warn(hw, | |
| "Config File checksum mismatch: csum=%#x, computed=%#x\n", | |
| finicsum, cfcsum); | |
| } | |
| /* Validate device capabilities */ | |
| rv = csio_hw_validate_caps(hw, mbp); | |
| if (rv != 0) | |
| goto bye; | |
| /* | |
| * Note that we're operating with parameters | |
| * not supplied by the driver, rather than from hard-wired | |
| * initialization constants buried in the driver. | |
| */ | |
| hw->flags |= CSIO_HWF_USING_SOFT_PARAMS; | |
| /* device parameters */ | |
| rv = csio_get_device_params(hw); | |
| if (rv != 0) | |
| goto bye; | |
| /* Configure SGE */ | |
| csio_wr_sge_init(hw); | |
| /* | |
| * And finally tell the firmware to initialize itself using the | |
| * parameters from the Configuration File. | |
| */ | |
| /* Post event to notify completion of configuration */ | |
| csio_post_event(&hw->sm, CSIO_HWE_INIT); | |
| csio_info(hw, "Successfully configure using Firmware " | |
| "Configuration File %s, version %#x, computed checksum %#x\n", | |
| config_name, finiver, cfcsum); | |
| return 0; | |
| /* | |
| * Something bad happened. Return the error ... | |
| */ | |
| bye: | |
| if (mbp) | |
| mempool_free(mbp, hw->mb_mempool); | |
| hw->flags &= ~CSIO_HWF_USING_SOFT_PARAMS; | |
| csio_warn(hw, "Configuration file error %d\n", rv); | |
| return rv; | |
| } | |
| /* Is the given firmware API compatible with the one the driver was compiled | |
| * with? | |
| */ | |
| static int fw_compatible(const struct fw_hdr *hdr1, const struct fw_hdr *hdr2) | |
| { | |
| /* short circuit if it's the exact same firmware version */ | |
| if (hdr1->chip == hdr2->chip && hdr1->fw_ver == hdr2->fw_ver) | |
| return 1; | |
| #define SAME_INTF(x) (hdr1->intfver_##x == hdr2->intfver_##x) | |
| if (hdr1->chip == hdr2->chip && SAME_INTF(nic) && SAME_INTF(vnic) && | |
| SAME_INTF(ri) && SAME_INTF(iscsi) && SAME_INTF(fcoe)) | |
| return 1; | |
| #undef SAME_INTF | |
| return 0; | |
| } | |
| /* The firmware in the filesystem is usable, but should it be installed? | |
| * This routine explains itself in detail if it indicates the filesystem | |
| * firmware should be installed. | |
| */ | |
| static int csio_should_install_fs_fw(struct csio_hw *hw, int card_fw_usable, | |
| int k, int c) | |
| { | |
| const char *reason; | |
| if (!card_fw_usable) { | |
| reason = "incompatible or unusable"; | |
| goto install; | |
| } | |
| if (k > c) { | |
| reason = "older than the version supported with this driver"; | |
| goto install; | |
| } | |
| return 0; | |
| install: | |
| csio_err(hw, "firmware on card (%u.%u.%u.%u) is %s, " | |
| "installing firmware %u.%u.%u.%u on card.\n", | |
| FW_HDR_FW_VER_MAJOR_G(c), FW_HDR_FW_VER_MINOR_G(c), | |
| FW_HDR_FW_VER_MICRO_G(c), FW_HDR_FW_VER_BUILD_G(c), reason, | |
| FW_HDR_FW_VER_MAJOR_G(k), FW_HDR_FW_VER_MINOR_G(k), | |
| FW_HDR_FW_VER_MICRO_G(k), FW_HDR_FW_VER_BUILD_G(k)); | |
| return 1; | |
| } | |
| static struct fw_info fw_info_array[] = { | |
| { | |
| .chip = CHELSIO_T5, | |
| .fs_name = FW_CFG_NAME_T5, | |
| .fw_mod_name = FW_FNAME_T5, | |
| .fw_hdr = { | |
| .chip = FW_HDR_CHIP_T5, | |
| .fw_ver = __cpu_to_be32(FW_VERSION(T5)), | |
| .intfver_nic = FW_INTFVER(T5, NIC), | |
| .intfver_vnic = FW_INTFVER(T5, VNIC), | |
| .intfver_ri = FW_INTFVER(T5, RI), | |
| .intfver_iscsi = FW_INTFVER(T5, ISCSI), | |
| .intfver_fcoe = FW_INTFVER(T5, FCOE), | |
| }, | |
| } | |
| }; | |
| static struct fw_info *find_fw_info(int chip) | |
| { | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(fw_info_array); i++) { | |
| if (fw_info_array[i].chip == chip) | |
| return &fw_info_array[i]; | |
| } | |
| return NULL; | |
| } | |
| static int csio_hw_prep_fw(struct csio_hw *hw, struct fw_info *fw_info, | |
| const u8 *fw_data, unsigned int fw_size, | |
| struct fw_hdr *card_fw, enum csio_dev_state state, | |
| int *reset) | |
| { | |
| int ret, card_fw_usable, fs_fw_usable; | |
| const struct fw_hdr *fs_fw; | |
| const struct fw_hdr *drv_fw; | |
| drv_fw = &fw_info->fw_hdr; | |
| /* Read the header of the firmware on the card */ | |
| ret = csio_hw_read_flash(hw, FLASH_FW_START, | |
| sizeof(*card_fw) / sizeof(uint32_t), | |
| (uint32_t *)card_fw, 1); | |
| if (ret == 0) { | |
| card_fw_usable = fw_compatible(drv_fw, (const void *)card_fw); | |
| } else { | |
| csio_err(hw, | |
| "Unable to read card's firmware header: %d\n", ret); | |
| card_fw_usable = 0; | |
| } | |
| if (fw_data != NULL) { | |
| fs_fw = (const void *)fw_data; | |
| fs_fw_usable = fw_compatible(drv_fw, fs_fw); | |
| } else { | |
| fs_fw = NULL; | |
| fs_fw_usable = 0; | |
| } | |
| if (card_fw_usable && card_fw->fw_ver == drv_fw->fw_ver && | |
| (!fs_fw_usable || fs_fw->fw_ver == drv_fw->fw_ver)) { | |
| /* Common case: the firmware on the card is an exact match and | |
| * the filesystem one is an exact match too, or the filesystem | |
| * one is absent/incompatible. | |
| */ | |
| } else if (fs_fw_usable && state == CSIO_DEV_STATE_UNINIT && | |
| csio_should_install_fs_fw(hw, card_fw_usable, | |
| be32_to_cpu(fs_fw->fw_ver), | |
| be32_to_cpu(card_fw->fw_ver))) { | |
| ret = csio_hw_fw_upgrade(hw, hw->pfn, fw_data, | |
| fw_size, 0); | |
| if (ret != 0) { | |
| csio_err(hw, | |
| "failed to install firmware: %d\n", ret); | |
| goto bye; | |
| } | |
| /* Installed successfully, update the cached header too. */ | |
| memcpy(card_fw, fs_fw, sizeof(*card_fw)); | |
| card_fw_usable = 1; | |
| *reset = 0; /* already reset as part of load_fw */ | |
| } | |
| if (!card_fw_usable) { | |
| uint32_t d, c, k; | |
| d = be32_to_cpu(drv_fw->fw_ver); | |
| c = be32_to_cpu(card_fw->fw_ver); | |
| k = fs_fw ? be32_to_cpu(fs_fw->fw_ver) : 0; | |
| csio_err(hw, "Cannot find a usable firmware: " | |
| "chip state %d, " | |
| "driver compiled with %d.%d.%d.%d, " | |
| "card has %d.%d.%d.%d, filesystem has %d.%d.%d.%d\n", | |
| state, | |
| FW_HDR_FW_VER_MAJOR_G(d), FW_HDR_FW_VER_MINOR_G(d), | |
| FW_HDR_FW_VER_MICRO_G(d), FW_HDR_FW_VER_BUILD_G(d), | |
| FW_HDR_FW_VER_MAJOR_G(c), FW_HDR_FW_VER_MINOR_G(c), | |
| FW_HDR_FW_VER_MICRO_G(c), FW_HDR_FW_VER_BUILD_G(c), | |
| FW_HDR_FW_VER_MAJOR_G(k), FW_HDR_FW_VER_MINOR_G(k), | |
| FW_HDR_FW_VER_MICRO_G(k), FW_HDR_FW_VER_BUILD_G(k)); | |
| ret = EINVAL; | |
| goto bye; | |
| } | |
| /* We're using whatever's on the card and it's known to be good. */ | |
| hw->fwrev = be32_to_cpu(card_fw->fw_ver); | |
| hw->tp_vers = be32_to_cpu(card_fw->tp_microcode_ver); | |
| bye: | |
| return ret; | |
| } | |
| /* | |
| * Returns -EINVAL if attempts to flash the firmware failed | |
| * else returns 0, | |
| * if flashing was not attempted because the card had the | |
| * latest firmware ECANCELED is returned | |
| */ | |
| static int | |
| csio_hw_flash_fw(struct csio_hw *hw, int *reset) | |
| { | |
| int ret = -ECANCELED; | |
| const struct firmware *fw; | |
| struct fw_info *fw_info; | |
| struct fw_hdr *card_fw; | |
| struct pci_dev *pci_dev = hw->pdev; | |
| struct device *dev = &pci_dev->dev ; | |
| const u8 *fw_data = NULL; | |
| unsigned int fw_size = 0; | |
| /* This is the firmware whose headers the driver was compiled | |
| * against | |
| */ | |
| fw_info = find_fw_info(CHELSIO_CHIP_VERSION(hw->chip_id)); | |
| if (fw_info == NULL) { | |
| csio_err(hw, | |
| "unable to get firmware info for chip %d.\n", | |
| CHELSIO_CHIP_VERSION(hw->chip_id)); | |
| return -EINVAL; | |
| } | |
| if (request_firmware(&fw, FW_FNAME_T5, dev) < 0) { | |
| csio_err(hw, "could not find firmware image %s, err: %d\n", | |
| FW_FNAME_T5, ret); | |
| } else { | |
| fw_data = fw->data; | |
| fw_size = fw->size; | |
| } | |
| /* allocate memory to read the header of the firmware on the | |
| * card | |
| */ | |
| card_fw = kmalloc(sizeof(*card_fw), GFP_KERNEL); | |
| /* upgrade FW logic */ | |
| ret = csio_hw_prep_fw(hw, fw_info, fw_data, fw_size, card_fw, | |
| hw->fw_state, reset); | |
| /* Cleaning up */ | |
| if (fw != NULL) | |
| release_firmware(fw); | |
| kfree(card_fw); | |
| return ret; | |
| } | |
| /* | |
| * csio_hw_configure - Configure HW | |
| * @hw - HW module | |
| * | |
| */ | |
| static void | |
| csio_hw_configure(struct csio_hw *hw) | |
| { | |
| int reset = 1; | |
| int rv; | |
| u32 param[1]; | |
| rv = csio_hw_dev_ready(hw); | |
| if (rv != 0) { | |
| CSIO_INC_STATS(hw, n_err_fatal); | |
| csio_post_event(&hw->sm, CSIO_HWE_FATAL); | |
| goto out; | |
| } | |
| /* HW version */ | |
| hw->chip_ver = (char)csio_rd_reg32(hw, PL_REV_A); | |
| /* Needed for FW download */ | |
| rv = csio_hw_get_flash_params(hw); | |
| if (rv != 0) { | |
| csio_err(hw, "Failed to get serial flash params rv:%d\n", rv); | |
| csio_post_event(&hw->sm, CSIO_HWE_FATAL); | |
| goto out; | |
| } | |
| /* Set PCIe completion timeout to 4 seconds */ | |
| if (pci_is_pcie(hw->pdev)) | |
| pcie_capability_clear_and_set_word(hw->pdev, PCI_EXP_DEVCTL2, | |
| PCI_EXP_DEVCTL2_COMP_TIMEOUT, 0xd); | |
| hw->chip_ops->chip_set_mem_win(hw, MEMWIN_CSIOSTOR); | |
| rv = csio_hw_get_fw_version(hw, &hw->fwrev); | |
| if (rv != 0) | |
| goto out; | |
| csio_hw_print_fw_version(hw, "Firmware revision"); | |
| rv = csio_do_hello(hw, &hw->fw_state); | |
| if (rv != 0) { | |
| CSIO_INC_STATS(hw, n_err_fatal); | |
| csio_post_event(&hw->sm, CSIO_HWE_FATAL); | |
| goto out; | |
| } | |
| /* Read vpd */ | |
| rv = csio_hw_get_vpd_params(hw, &hw->vpd); | |
| if (rv != 0) | |
| goto out; | |
| csio_hw_get_fw_version(hw, &hw->fwrev); | |
| csio_hw_get_tp_version(hw, &hw->tp_vers); | |
| if (csio_is_hw_master(hw) && hw->fw_state != CSIO_DEV_STATE_INIT) { | |
| /* Do firmware update */ | |
| spin_unlock_irq(&hw->lock); | |
| rv = csio_hw_flash_fw(hw, &reset); | |
| spin_lock_irq(&hw->lock); | |
| if (rv != 0) | |
| goto out; | |
| /* If the firmware doesn't support Configuration Files, | |
| * return an error. | |
| */ | |
| rv = csio_hw_check_fwconfig(hw, param); | |
| if (rv != 0) { | |
| csio_info(hw, "Firmware doesn't support " | |
| "Firmware Configuration files\n"); | |
| goto out; | |
| } | |
| /* The firmware provides us with a memory buffer where we can | |
| * load a Configuration File from the host if we want to | |
| * override the Configuration File in flash. | |
| */ | |
| rv = csio_hw_use_fwconfig(hw, reset, param); | |
| if (rv == -ENOENT) { | |
| csio_info(hw, "Could not initialize " | |
| "adapter, error%d\n", rv); | |
| goto out; | |
| } | |
| if (rv != 0) { | |
| csio_info(hw, "Could not initialize " | |
| "adapter, error%d\n", rv); | |
| goto out; | |
| } | |
| } else { | |
| if (hw->fw_state == CSIO_DEV_STATE_INIT) { | |
| hw->flags |= CSIO_HWF_USING_SOFT_PARAMS; | |
| /* device parameters */ | |
| rv = csio_get_device_params(hw); | |
| if (rv != 0) | |
| goto out; | |
| /* Get device capabilities */ | |
| rv = csio_config_device_caps(hw); | |
| if (rv != 0) | |
| goto out; | |
| /* Configure SGE */ | |
| csio_wr_sge_init(hw); | |
| /* Post event to notify completion of configuration */ | |
| csio_post_event(&hw->sm, CSIO_HWE_INIT); | |
| goto out; | |
| } | |
| } /* if not master */ | |
| out: | |
| return; | |
| } | |
| /* | |
| * csio_hw_initialize - Initialize HW | |
| * @hw - HW module | |
| * | |
| */ | |
| static void | |
| csio_hw_initialize(struct csio_hw *hw) | |
| { | |
| struct csio_mb *mbp; | |
| enum fw_retval retval; | |
| int rv; | |
| int i; | |
| if (csio_is_hw_master(hw) && hw->fw_state != CSIO_DEV_STATE_INIT) { | |
| mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); | |
| if (!mbp) | |
| goto out; | |
| csio_mb_initialize(hw, mbp, CSIO_MB_DEFAULT_TMO, NULL); | |
| if (csio_mb_issue(hw, mbp)) { | |
| csio_err(hw, "Issue of FW_INITIALIZE_CMD failed!\n"); | |
| goto free_and_out; | |
| } | |
| retval = csio_mb_fw_retval(mbp); | |
| if (retval != FW_SUCCESS) { | |
| csio_err(hw, "FW_INITIALIZE_CMD returned 0x%x!\n", | |
| retval); | |
| goto free_and_out; | |
| } | |
| mempool_free(mbp, hw->mb_mempool); | |
| } | |
| rv = csio_get_fcoe_resinfo(hw); | |
| if (rv != 0) { | |
| csio_err(hw, "Failed to read fcoe resource info: %d\n", rv); | |
| goto out; | |
| } | |
| spin_unlock_irq(&hw->lock); | |
| rv = csio_config_queues(hw); | |
| spin_lock_irq(&hw->lock); | |
| if (rv != 0) { | |
| csio_err(hw, "Config of queues failed!: %d\n", rv); | |
| goto out; | |
| } | |
| for (i = 0; i < hw->num_pports; i++) | |
| hw->pport[i].mod_type = FW_PORT_MOD_TYPE_NA; | |
| if (csio_is_hw_master(hw) && hw->fw_state != CSIO_DEV_STATE_INIT) { | |
| rv = csio_enable_ports(hw); | |
| if (rv != 0) { | |
| csio_err(hw, "Failed to enable ports: %d\n", rv); | |
| goto out; | |
| } | |
| } | |
| csio_post_event(&hw->sm, CSIO_HWE_INIT_DONE); | |
| return; | |
| free_and_out: | |
| mempool_free(mbp, hw->mb_mempool); | |
| out: | |
| return; | |
| } | |
| #define PF_INTR_MASK (PFSW_F | PFCIM_F) | |
| /* | |
| * csio_hw_intr_enable - Enable HW interrupts | |
| * @hw: Pointer to HW module. | |
| * | |
| * Enable interrupts in HW registers. | |
| */ | |
| static void | |
| csio_hw_intr_enable(struct csio_hw *hw) | |
| { | |
| uint16_t vec = (uint16_t)csio_get_mb_intr_idx(csio_hw_to_mbm(hw)); | |
| uint32_t pf = SOURCEPF_G(csio_rd_reg32(hw, PL_WHOAMI_A)); | |
| uint32_t pl = csio_rd_reg32(hw, PL_INT_ENABLE_A); | |
| /* | |
| * Set aivec for MSI/MSIX. PCIE_PF_CFG.INTXType is set up | |
| * by FW, so do nothing for INTX. | |
| */ | |
| if (hw->intr_mode == CSIO_IM_MSIX) | |
| csio_set_reg_field(hw, MYPF_REG(PCIE_PF_CFG_A), | |
| AIVEC_V(AIVEC_M), vec); | |
| else if (hw->intr_mode == CSIO_IM_MSI) | |
| csio_set_reg_field(hw, MYPF_REG(PCIE_PF_CFG_A), | |
| AIVEC_V(AIVEC_M), 0); | |
| csio_wr_reg32(hw, PF_INTR_MASK, MYPF_REG(PL_PF_INT_ENABLE_A)); | |
| /* Turn on MB interrupts - this will internally flush PIO as well */ | |
| csio_mb_intr_enable(hw); | |
| /* These are common registers - only a master can modify them */ | |
| if (csio_is_hw_master(hw)) { | |
| /* | |
| * Disable the Serial FLASH interrupt, if enabled! | |
| */ | |
| pl &= (~SF_F); | |
| csio_wr_reg32(hw, pl, PL_INT_ENABLE_A); | |
| csio_wr_reg32(hw, ERR_CPL_EXCEED_IQE_SIZE_F | | |
| EGRESS_SIZE_ERR_F | ERR_INVALID_CIDX_INC_F | | |
| ERR_CPL_OPCODE_0_F | ERR_DROPPED_DB_F | | |
| ERR_DATA_CPL_ON_HIGH_QID1_F | | |
| ERR_DATA_CPL_ON_HIGH_QID0_F | ERR_BAD_DB_PIDX3_F | | |
| ERR_BAD_DB_PIDX2_F | ERR_BAD_DB_PIDX1_F | | |
| ERR_BAD_DB_PIDX0_F | ERR_ING_CTXT_PRIO_F | | |
| ERR_EGR_CTXT_PRIO_F | INGRESS_SIZE_ERR_F, | |
| SGE_INT_ENABLE3_A); | |
| csio_set_reg_field(hw, PL_INT_MAP0_A, 0, 1 << pf); | |
| } | |
| hw->flags |= CSIO_HWF_HW_INTR_ENABLED; | |
| } | |
| /* | |
| * csio_hw_intr_disable - Disable HW interrupts | |
| * @hw: Pointer to HW module. | |
| * | |
| * Turn off Mailbox and PCI_PF_CFG interrupts. | |
| */ | |
| void | |
| csio_hw_intr_disable(struct csio_hw *hw) | |
| { | |
| uint32_t pf = SOURCEPF_G(csio_rd_reg32(hw, PL_WHOAMI_A)); | |
| if (!(hw->flags & CSIO_HWF_HW_INTR_ENABLED)) | |
| return; | |
| hw->flags &= ~CSIO_HWF_HW_INTR_ENABLED; | |
| csio_wr_reg32(hw, 0, MYPF_REG(PL_PF_INT_ENABLE_A)); | |
| if (csio_is_hw_master(hw)) | |
| csio_set_reg_field(hw, PL_INT_MAP0_A, 1 << pf, 0); | |
| /* Turn off MB interrupts */ | |
| csio_mb_intr_disable(hw); | |
| } | |
| void | |
| csio_hw_fatal_err(struct csio_hw *hw) | |
| { | |
| csio_set_reg_field(hw, SGE_CONTROL_A, GLOBALENABLE_F, 0); | |
| csio_hw_intr_disable(hw); | |
| /* Do not reset HW, we may need FW state for debugging */ | |
| csio_fatal(hw, "HW Fatal error encountered!\n"); | |
| } | |
| /*****************************************************************************/ | |
| /* START: HW SM */ | |
| /*****************************************************************************/ | |
| /* | |
| * csio_hws_uninit - Uninit state | |
| * @hw - HW module | |
| * @evt - Event | |
| * | |
| */ | |
| static void | |
| csio_hws_uninit(struct csio_hw *hw, enum csio_hw_ev evt) | |
| { | |
| hw->prev_evt = hw->cur_evt; | |
| hw->cur_evt = evt; | |
| CSIO_INC_STATS(hw, n_evt_sm[evt]); | |
| switch (evt) { | |
| case CSIO_HWE_CFG: | |
| csio_set_state(&hw->sm, csio_hws_configuring); | |
| csio_hw_configure(hw); | |
| break; | |
| default: | |
| CSIO_INC_STATS(hw, n_evt_unexp); | |
| break; | |
| } | |
| } | |
| /* | |
| * csio_hws_configuring - Configuring state | |
| * @hw - HW module | |
| * @evt - Event | |
| * | |
| */ | |
| static void | |
| csio_hws_configuring(struct csio_hw *hw, enum csio_hw_ev evt) | |
| { | |
| hw->prev_evt = hw->cur_evt; | |
| hw->cur_evt = evt; | |
| CSIO_INC_STATS(hw, n_evt_sm[evt]); | |
| switch (evt) { | |
| case CSIO_HWE_INIT: | |
| csio_set_state(&hw->sm, csio_hws_initializing); | |
| csio_hw_initialize(hw); | |
| break; | |
| case CSIO_HWE_INIT_DONE: | |
| csio_set_state(&hw->sm, csio_hws_ready); | |
| /* Fan out event to all lnode SMs */ | |
| csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWREADY); | |
| break; | |
| case CSIO_HWE_FATAL: | |
| csio_set_state(&hw->sm, csio_hws_uninit); | |
| break; | |
| case CSIO_HWE_PCI_REMOVE: | |
| csio_do_bye(hw); | |
| break; | |
| default: | |
| CSIO_INC_STATS(hw, n_evt_unexp); | |
| break; | |
| } | |
| } | |
| /* | |
| * csio_hws_initializing - Initialiazing state | |
| * @hw - HW module | |
| * @evt - Event | |
| * | |
| */ | |
| static void | |
| csio_hws_initializing(struct csio_hw *hw, enum csio_hw_ev evt) | |
| { | |
| hw->prev_evt = hw->cur_evt; | |
| hw->cur_evt = evt; | |
| CSIO_INC_STATS(hw, n_evt_sm[evt]); | |
| switch (evt) { | |
| case CSIO_HWE_INIT_DONE: | |
| csio_set_state(&hw->sm, csio_hws_ready); | |
| /* Fan out event to all lnode SMs */ | |
| csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWREADY); | |
| /* Enable interrupts */ | |
| csio_hw_intr_enable(hw); | |
| break; | |
| case CSIO_HWE_FATAL: | |
| csio_set_state(&hw->sm, csio_hws_uninit); | |
| break; | |
| case CSIO_HWE_PCI_REMOVE: | |
| csio_do_bye(hw); | |
| break; | |
| default: | |
| CSIO_INC_STATS(hw, n_evt_unexp); | |
| break; | |
| } | |
| } | |
| /* | |
| * csio_hws_ready - Ready state | |
| * @hw - HW module | |
| * @evt - Event | |
| * | |
| */ | |
| static void | |
| csio_hws_ready(struct csio_hw *hw, enum csio_hw_ev evt) | |
| { | |
| /* Remember the event */ | |
| hw->evtflag = evt; | |
| hw->prev_evt = hw->cur_evt; | |
| hw->cur_evt = evt; | |
| CSIO_INC_STATS(hw, n_evt_sm[evt]); | |
| switch (evt) { | |
| case CSIO_HWE_HBA_RESET: | |
| case CSIO_HWE_FW_DLOAD: | |
| case CSIO_HWE_SUSPEND: | |
| case CSIO_HWE_PCI_REMOVE: | |
| case CSIO_HWE_PCIERR_DETECTED: | |
| csio_set_state(&hw->sm, csio_hws_quiescing); | |
| /* cleanup all outstanding cmds */ | |
| if (evt == CSIO_HWE_HBA_RESET || | |
| evt == CSIO_HWE_PCIERR_DETECTED) | |
| csio_scsim_cleanup_io(csio_hw_to_scsim(hw), false); | |
| else | |
| csio_scsim_cleanup_io(csio_hw_to_scsim(hw), true); | |
| csio_hw_intr_disable(hw); | |
| csio_hw_mbm_cleanup(hw); | |
| csio_evtq_stop(hw); | |
| csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWSTOP); | |
| csio_evtq_flush(hw); | |
| csio_mgmtm_cleanup(csio_hw_to_mgmtm(hw)); | |
| csio_post_event(&hw->sm, CSIO_HWE_QUIESCED); | |
| break; | |
| case CSIO_HWE_FATAL: | |
| csio_set_state(&hw->sm, csio_hws_uninit); | |
| break; | |
| default: | |
| CSIO_INC_STATS(hw, n_evt_unexp); | |
| break; | |
| } | |
| } | |
| /* | |
| * csio_hws_quiescing - Quiescing state | |
| * @hw - HW module | |
| * @evt - Event | |
| * | |
| */ | |
| static void | |
| csio_hws_quiescing(struct csio_hw *hw, enum csio_hw_ev evt) | |
| { | |
| hw->prev_evt = hw->cur_evt; | |
| hw->cur_evt = evt; | |
| CSIO_INC_STATS(hw, n_evt_sm[evt]); | |
| switch (evt) { | |
| case CSIO_HWE_QUIESCED: | |
| switch (hw->evtflag) { | |
| case CSIO_HWE_FW_DLOAD: | |
| csio_set_state(&hw->sm, csio_hws_resetting); | |
| /* Download firmware */ | |
| /* Fall through */ | |
| case CSIO_HWE_HBA_RESET: | |
| csio_set_state(&hw->sm, csio_hws_resetting); | |
| /* Start reset of the HBA */ | |
| csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWRESET); | |
| csio_wr_destroy_queues(hw, false); | |
| csio_do_reset(hw, false); | |
| csio_post_event(&hw->sm, CSIO_HWE_HBA_RESET_DONE); | |
| break; | |
| case CSIO_HWE_PCI_REMOVE: | |
| csio_set_state(&hw->sm, csio_hws_removing); | |
| csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWREMOVE); | |
| csio_wr_destroy_queues(hw, true); | |
| /* Now send the bye command */ | |
| csio_do_bye(hw); | |
| break; | |
| case CSIO_HWE_SUSPEND: | |
| csio_set_state(&hw->sm, csio_hws_quiesced); | |
| break; | |
| case CSIO_HWE_PCIERR_DETECTED: | |
| csio_set_state(&hw->sm, csio_hws_pcierr); | |
| csio_wr_destroy_queues(hw, false); | |
| break; | |
| default: | |
| CSIO_INC_STATS(hw, n_evt_unexp); | |
| break; | |
| } | |
| break; | |
| default: | |
| CSIO_INC_STATS(hw, n_evt_unexp); | |
| break; | |
| } | |
| } | |
| /* | |
| * csio_hws_quiesced - Quiesced state | |
| * @hw - HW module | |
| * @evt - Event | |
| * | |
| */ | |
| static void | |
| csio_hws_quiesced(struct csio_hw *hw, enum csio_hw_ev evt) | |
| { | |
| hw->prev_evt = hw->cur_evt; | |
| hw->cur_evt = evt; | |
| CSIO_INC_STATS(hw, n_evt_sm[evt]); | |
| switch (evt) { | |
| case CSIO_HWE_RESUME: | |
| csio_set_state(&hw->sm, csio_hws_configuring); | |
| csio_hw_configure(hw); | |
| break; | |
| default: | |
| CSIO_INC_STATS(hw, n_evt_unexp); | |
| break; | |
| } | |
| } | |
| /* | |
| * csio_hws_resetting - HW Resetting state | |
| * @hw - HW module | |
| * @evt - Event | |
| * | |
| */ | |
| static void | |
| csio_hws_resetting(struct csio_hw *hw, enum csio_hw_ev evt) | |
| { | |
| hw->prev_evt = hw->cur_evt; | |
| hw->cur_evt = evt; | |
| CSIO_INC_STATS(hw, n_evt_sm[evt]); | |
| switch (evt) { | |
| case CSIO_HWE_HBA_RESET_DONE: | |
| csio_evtq_start(hw); | |
| csio_set_state(&hw->sm, csio_hws_configuring); | |
| csio_hw_configure(hw); | |
| break; | |
| default: | |
| CSIO_INC_STATS(hw, n_evt_unexp); | |
| break; | |
| } | |
| } | |
| /* | |
| * csio_hws_removing - PCI Hotplug removing state | |
| * @hw - HW module | |
| * @evt - Event | |
| * | |
| */ | |
| static void | |
| csio_hws_removing(struct csio_hw *hw, enum csio_hw_ev evt) | |
| { | |
| hw->prev_evt = hw->cur_evt; | |
| hw->cur_evt = evt; | |
| CSIO_INC_STATS(hw, n_evt_sm[evt]); | |
| switch (evt) { | |
| case CSIO_HWE_HBA_RESET: | |
| if (!csio_is_hw_master(hw)) | |
| break; | |
| /* | |
| * The BYE should have alerady been issued, so we cant | |
| * use the mailbox interface. Hence we use the PL_RST | |
| * register directly. | |
| */ | |
| csio_err(hw, "Resetting HW and waiting 2 seconds...\n"); | |
| csio_wr_reg32(hw, PIORSTMODE_F | PIORST_F, PL_RST_A); | |
| mdelay(2000); | |
| break; | |
| /* Should never receive any new events */ | |
| default: | |
| CSIO_INC_STATS(hw, n_evt_unexp); | |
| break; | |
| } | |
| } | |
| /* | |
| * csio_hws_pcierr - PCI Error state | |
| * @hw - HW module | |
| * @evt - Event | |
| * | |
| */ | |
| static void | |
| csio_hws_pcierr(struct csio_hw *hw, enum csio_hw_ev evt) | |
| { | |
| hw->prev_evt = hw->cur_evt; | |
| hw->cur_evt = evt; | |
| CSIO_INC_STATS(hw, n_evt_sm[evt]); | |
| switch (evt) { | |
| case CSIO_HWE_PCIERR_SLOT_RESET: | |
| csio_evtq_start(hw); | |
| csio_set_state(&hw->sm, csio_hws_configuring); | |
| csio_hw_configure(hw); | |
| break; | |
| default: | |
| CSIO_INC_STATS(hw, n_evt_unexp); | |
| break; | |
| } | |
| } | |
| /*****************************************************************************/ | |
| /* END: HW SM */ | |
| /*****************************************************************************/ | |
| /* | |
| * csio_handle_intr_status - table driven interrupt handler | |
| * @hw: HW instance | |
| * @reg: the interrupt status register to process | |
| * @acts: table of interrupt actions | |
| * | |
| * A table driven interrupt handler that applies a set of masks to an | |
| * interrupt status word and performs the corresponding actions if the | |
| * interrupts described by the mask have occured. The actions include | |
| * optionally emitting a warning or alert message. The table is terminated | |
| * by an entry specifying mask 0. Returns the number of fatal interrupt | |
| * conditions. | |
| */ | |
| int | |
| csio_handle_intr_status(struct csio_hw *hw, unsigned int reg, | |
| const struct intr_info *acts) | |
| { | |
| int fatal = 0; | |
| unsigned int mask = 0; | |
| unsigned int status = csio_rd_reg32(hw, reg); | |
| for ( ; acts->mask; ++acts) { | |
| if (!(status & acts->mask)) | |
| continue; | |
| if (acts->fatal) { | |
| fatal++; | |
| csio_fatal(hw, "Fatal %s (0x%x)\n", | |
| acts->msg, status & acts->mask); | |
| } else if (acts->msg) | |
| csio_info(hw, "%s (0x%x)\n", | |
| acts->msg, status & acts->mask); | |
| mask |= acts->mask; | |
| } | |
| status &= mask; | |
| if (status) /* clear processed interrupts */ | |
| csio_wr_reg32(hw, status, reg); | |
| return fatal; | |
| } | |
| /* | |
| * TP interrupt handler. | |
| */ | |
| static void csio_tp_intr_handler(struct csio_hw *hw) | |
| { | |
| static struct intr_info tp_intr_info[] = { | |
| { 0x3fffffff, "TP parity error", -1, 1 }, | |
| { FLMTXFLSTEMPTY_F, "TP out of Tx pages", -1, 1 }, | |
| { 0, NULL, 0, 0 } | |
| }; | |
| if (csio_handle_intr_status(hw, TP_INT_CAUSE_A, tp_intr_info)) | |
| csio_hw_fatal_err(hw); | |
| } | |
| /* | |
| * SGE interrupt handler. | |
| */ | |
| static void csio_sge_intr_handler(struct csio_hw *hw) | |
| { | |
| uint64_t v; | |
| static struct intr_info sge_intr_info[] = { | |
| { ERR_CPL_EXCEED_IQE_SIZE_F, | |
| "SGE received CPL exceeding IQE size", -1, 1 }, | |
| { ERR_INVALID_CIDX_INC_F, | |
| "SGE GTS CIDX increment too large", -1, 0 }, | |
| { ERR_CPL_OPCODE_0_F, "SGE received 0-length CPL", -1, 0 }, | |
| { ERR_DROPPED_DB_F, "SGE doorbell dropped", -1, 0 }, | |
| { ERR_DATA_CPL_ON_HIGH_QID1_F | ERR_DATA_CPL_ON_HIGH_QID0_F, | |
| "SGE IQID > 1023 received CPL for FL", -1, 0 }, | |
| { ERR_BAD_DB_PIDX3_F, "SGE DBP 3 pidx increment too large", -1, | |
| 0 }, | |
| { ERR_BAD_DB_PIDX2_F, "SGE DBP 2 pidx increment too large", -1, | |
| 0 }, | |
| { ERR_BAD_DB_PIDX1_F, "SGE DBP 1 pidx increment too large", -1, | |
| 0 }, | |
| { ERR_BAD_DB_PIDX0_F, "SGE DBP 0 pidx increment too large", -1, | |
| 0 }, | |
| { ERR_ING_CTXT_PRIO_F, | |
| "SGE too many priority ingress contexts", -1, 0 }, | |
| { ERR_EGR_CTXT_PRIO_F, | |
| "SGE too many priority egress contexts", -1, 0 }, | |
| { INGRESS_SIZE_ERR_F, "SGE illegal ingress QID", -1, 0 }, | |
| { EGRESS_SIZE_ERR_F, "SGE illegal egress QID", -1, 0 }, | |
| { 0, NULL, 0, 0 } | |
| }; | |
| v = (uint64_t)csio_rd_reg32(hw, SGE_INT_CAUSE1_A) | | |
| ((uint64_t)csio_rd_reg32(hw, SGE_INT_CAUSE2_A) << 32); | |
| if (v) { | |
| csio_fatal(hw, "SGE parity error (%#llx)\n", | |
| (unsigned long long)v); | |
| csio_wr_reg32(hw, (uint32_t)(v & 0xFFFFFFFF), | |
| SGE_INT_CAUSE1_A); | |
| csio_wr_reg32(hw, (uint32_t)(v >> 32), SGE_INT_CAUSE2_A); | |
| } | |
| v |= csio_handle_intr_status(hw, SGE_INT_CAUSE3_A, sge_intr_info); | |
| if (csio_handle_intr_status(hw, SGE_INT_CAUSE3_A, sge_intr_info) || | |
| v != 0) | |
| csio_hw_fatal_err(hw); | |
| } | |
| #define CIM_OBQ_INTR (OBQULP0PARERR_F | OBQULP1PARERR_F | OBQULP2PARERR_F |\ | |
| OBQULP3PARERR_F | OBQSGEPARERR_F | OBQNCSIPARERR_F) | |
| #define CIM_IBQ_INTR (IBQTP0PARERR_F | IBQTP1PARERR_F | IBQULPPARERR_F |\ | |
| IBQSGEHIPARERR_F | IBQSGELOPARERR_F | IBQNCSIPARERR_F) | |
| /* | |
| * CIM interrupt handler. | |
| */ | |
| static void csio_cim_intr_handler(struct csio_hw *hw) | |
| { | |
| static struct intr_info cim_intr_info[] = { | |
| { PREFDROPINT_F, "CIM control register prefetch drop", -1, 1 }, | |
| { CIM_OBQ_INTR, "CIM OBQ parity error", -1, 1 }, | |
| { CIM_IBQ_INTR, "CIM IBQ parity error", -1, 1 }, | |
| { MBUPPARERR_F, "CIM mailbox uP parity error", -1, 1 }, | |
| { MBHOSTPARERR_F, "CIM mailbox host parity error", -1, 1 }, | |
| { TIEQINPARERRINT_F, "CIM TIEQ outgoing parity error", -1, 1 }, | |
| { TIEQOUTPARERRINT_F, "CIM TIEQ incoming parity error", -1, 1 }, | |
| { 0, NULL, 0, 0 } | |
| }; | |
| static struct intr_info cim_upintr_info[] = { | |
| { RSVDSPACEINT_F, "CIM reserved space access", -1, 1 }, | |
| { ILLTRANSINT_F, "CIM illegal transaction", -1, 1 }, | |
| { ILLWRINT_F, "CIM illegal write", -1, 1 }, | |
| { ILLRDINT_F, "CIM illegal read", -1, 1 }, | |
| { ILLRDBEINT_F, "CIM illegal read BE", -1, 1 }, | |
| { ILLWRBEINT_F, "CIM illegal write BE", -1, 1 }, | |
| { SGLRDBOOTINT_F, "CIM single read from boot space", -1, 1 }, | |
| { SGLWRBOOTINT_F, "CIM single write to boot space", -1, 1 }, | |
| { BLKWRBOOTINT_F, "CIM block write to boot space", -1, 1 }, | |
| { SGLRDFLASHINT_F, "CIM single read from flash space", -1, 1 }, | |
| { SGLWRFLASHINT_F, "CIM single write to flash space", -1, 1 }, | |
| { BLKWRFLASHINT_F, "CIM block write to flash space", -1, 1 }, | |
| { SGLRDEEPROMINT_F, "CIM single EEPROM read", -1, 1 }, | |
| { SGLWREEPROMINT_F, "CIM single EEPROM write", -1, 1 }, | |
| { BLKRDEEPROMINT_F, "CIM block EEPROM read", -1, 1 }, | |
| { BLKWREEPROMINT_F, "CIM block EEPROM write", -1, 1 }, | |
| { SGLRDCTLINT_F, "CIM single read from CTL space", -1, 1 }, | |
| { SGLWRCTLINT_F, "CIM single write to CTL space", -1, 1 }, | |
| { BLKRDCTLINT_F, "CIM block read from CTL space", -1, 1 }, | |
| { BLKWRCTLINT_F, "CIM block write to CTL space", -1, 1 }, | |
| { SGLRDPLINT_F, "CIM single read from PL space", -1, 1 }, | |
| { SGLWRPLINT_F, "CIM single write to PL space", -1, 1 }, | |
| { BLKRDPLINT_F, "CIM block read from PL space", -1, 1 }, | |
| { BLKWRPLINT_F, "CIM block write to PL space", -1, 1 }, | |
| { REQOVRLOOKUPINT_F, "CIM request FIFO overwrite", -1, 1 }, | |
| { RSPOVRLOOKUPINT_F, "CIM response FIFO overwrite", -1, 1 }, | |
| { TIMEOUTINT_F, "CIM PIF timeout", -1, 1 }, | |
| { TIMEOUTMAINT_F, "CIM PIF MA timeout", -1, 1 }, | |
| { 0, NULL, 0, 0 } | |
| }; | |
| int fat; | |
| fat = csio_handle_intr_status(hw, CIM_HOST_INT_CAUSE_A, | |
| cim_intr_info) + | |
| csio_handle_intr_status(hw, CIM_HOST_UPACC_INT_CAUSE_A, | |
| cim_upintr_info); | |
| if (fat) | |
| csio_hw_fatal_err(hw); | |
| } | |
| /* | |
| * ULP RX interrupt handler. | |
| */ | |
| static void csio_ulprx_intr_handler(struct csio_hw *hw) | |
| { | |
| static struct intr_info ulprx_intr_info[] = { | |
| { 0x1800000, "ULPRX context error", -1, 1 }, | |
| { 0x7fffff, "ULPRX parity error", -1, 1 }, | |
| { 0, NULL, 0, 0 } | |
| }; | |
| if (csio_handle_intr_status(hw, ULP_RX_INT_CAUSE_A, ulprx_intr_info)) | |
| csio_hw_fatal_err(hw); | |
| } | |
| /* | |
| * ULP TX interrupt handler. | |
| */ | |
| static void csio_ulptx_intr_handler(struct csio_hw *hw) | |
| { | |
| static struct intr_info ulptx_intr_info[] = { | |
| { PBL_BOUND_ERR_CH3_F, "ULPTX channel 3 PBL out of bounds", -1, | |
| 0 }, | |
| { PBL_BOUND_ERR_CH2_F, "ULPTX channel 2 PBL out of bounds", -1, | |
| 0 }, | |
| { PBL_BOUND_ERR_CH1_F, "ULPTX channel 1 PBL out of bounds", -1, | |
| 0 }, | |
| { PBL_BOUND_ERR_CH0_F, "ULPTX channel 0 PBL out of bounds", -1, | |
| 0 }, | |
| { 0xfffffff, "ULPTX parity error", -1, 1 }, | |
| { 0, NULL, 0, 0 } | |
| }; | |
| if (csio_handle_intr_status(hw, ULP_TX_INT_CAUSE_A, ulptx_intr_info)) | |
| csio_hw_fatal_err(hw); | |
| } | |
| /* | |
| * PM TX interrupt handler. | |
| */ | |
| static void csio_pmtx_intr_handler(struct csio_hw *hw) | |
| { | |
| static struct intr_info pmtx_intr_info[] = { | |
| { PCMD_LEN_OVFL0_F, "PMTX channel 0 pcmd too large", -1, 1 }, | |
| { PCMD_LEN_OVFL1_F, "PMTX channel 1 pcmd too large", -1, 1 }, | |
| { PCMD_LEN_OVFL2_F, "PMTX channel 2 pcmd too large", -1, 1 }, | |
| { ZERO_C_CMD_ERROR_F, "PMTX 0-length pcmd", -1, 1 }, | |
| { 0xffffff0, "PMTX framing error", -1, 1 }, | |
| { OESPI_PAR_ERROR_F, "PMTX oespi parity error", -1, 1 }, | |
| { DB_OPTIONS_PAR_ERROR_F, "PMTX db_options parity error", -1, | |
| 1 }, | |
| { ICSPI_PAR_ERROR_F, "PMTX icspi parity error", -1, 1 }, | |
| { PMTX_C_PCMD_PAR_ERROR_F, "PMTX c_pcmd parity error", -1, 1}, | |
| { 0, NULL, 0, 0 } | |
| }; | |
| if (csio_handle_intr_status(hw, PM_TX_INT_CAUSE_A, pmtx_intr_info)) | |
| csio_hw_fatal_err(hw); | |
| } | |
| /* | |
| * PM RX interrupt handler. | |
| */ | |
| static void csio_pmrx_intr_handler(struct csio_hw *hw) | |
| { | |
| static struct intr_info pmrx_intr_info[] = { | |
| { ZERO_E_CMD_ERROR_F, "PMRX 0-length pcmd", -1, 1 }, | |
| { 0x3ffff0, "PMRX framing error", -1, 1 }, | |
| { OCSPI_PAR_ERROR_F, "PMRX ocspi parity error", -1, 1 }, | |
| { DB_OPTIONS_PAR_ERROR_F, "PMRX db_options parity error", -1, | |
| 1 }, | |
| { IESPI_PAR_ERROR_F, "PMRX iespi parity error", -1, 1 }, | |
| { PMRX_E_PCMD_PAR_ERROR_F, "PMRX e_pcmd parity error", -1, 1}, | |
| { 0, NULL, 0, 0 } | |
| }; | |
| if (csio_handle_intr_status(hw, PM_RX_INT_CAUSE_A, pmrx_intr_info)) | |
| csio_hw_fatal_err(hw); | |
| } | |
| /* | |
| * CPL switch interrupt handler. | |
| */ | |
| static void csio_cplsw_intr_handler(struct csio_hw *hw) | |
| { | |
| static struct intr_info cplsw_intr_info[] = { | |
| { CIM_OP_MAP_PERR_F, "CPLSW CIM op_map parity error", -1, 1 }, | |
| { CIM_OVFL_ERROR_F, "CPLSW CIM overflow", -1, 1 }, | |
| { TP_FRAMING_ERROR_F, "CPLSW TP framing error", -1, 1 }, | |
| { SGE_FRAMING_ERROR_F, "CPLSW SGE framing error", -1, 1 }, | |
| { CIM_FRAMING_ERROR_F, "CPLSW CIM framing error", -1, 1 }, | |
| { ZERO_SWITCH_ERROR_F, "CPLSW no-switch error", -1, 1 }, | |
| { 0, NULL, 0, 0 } | |
| }; | |
| if (csio_handle_intr_status(hw, CPL_INTR_CAUSE_A, cplsw_intr_info)) | |
| csio_hw_fatal_err(hw); | |
| } | |
| /* | |
| * LE interrupt handler. | |
| */ | |
| static void csio_le_intr_handler(struct csio_hw *hw) | |
| { | |
| static struct intr_info le_intr_info[] = { | |
| { LIPMISS_F, "LE LIP miss", -1, 0 }, | |
| { LIP0_F, "LE 0 LIP error", -1, 0 }, | |
| { PARITYERR_F, "LE parity error", -1, 1 }, | |
| { UNKNOWNCMD_F, "LE unknown command", -1, 1 }, | |
| { REQQPARERR_F, "LE request queue parity error", -1, 1 }, | |
| { 0, NULL, 0, 0 } | |
| }; | |
| if (csio_handle_intr_status(hw, LE_DB_INT_CAUSE_A, le_intr_info)) | |
| csio_hw_fatal_err(hw); | |
| } | |
| /* | |
| * MPS interrupt handler. | |
| */ | |
| static void csio_mps_intr_handler(struct csio_hw *hw) | |
| { | |
| static struct intr_info mps_rx_intr_info[] = { | |
| { 0xffffff, "MPS Rx parity error", -1, 1 }, | |
| { 0, NULL, 0, 0 } | |
| }; | |
| static struct intr_info mps_tx_intr_info[] = { | |
| { TPFIFO_V(TPFIFO_M), "MPS Tx TP FIFO parity error", -1, 1 }, | |
| { NCSIFIFO_F, "MPS Tx NC-SI FIFO parity error", -1, 1 }, | |
| { TXDATAFIFO_V(TXDATAFIFO_M), "MPS Tx data FIFO parity error", | |
| -1, 1 }, | |
| { TXDESCFIFO_V(TXDESCFIFO_M), "MPS Tx desc FIFO parity error", | |
| -1, 1 }, | |
| { BUBBLE_F, "MPS Tx underflow", -1, 1 }, | |
| { SECNTERR_F, "MPS Tx SOP/EOP error", -1, 1 }, | |
| { FRMERR_F, "MPS Tx framing error", -1, 1 }, | |
| { 0, NULL, 0, 0 } | |
| }; | |
| static struct intr_info mps_trc_intr_info[] = { | |
| { FILTMEM_V(FILTMEM_M), "MPS TRC filter parity error", -1, 1 }, | |
| { PKTFIFO_V(PKTFIFO_M), "MPS TRC packet FIFO parity error", | |
| -1, 1 }, | |
| { MISCPERR_F, "MPS TRC misc parity error", -1, 1 }, | |
| { 0, NULL, 0, 0 } | |
| }; | |
| static struct intr_info mps_stat_sram_intr_info[] = { | |
| { 0x1fffff, "MPS statistics SRAM parity error", -1, 1 }, | |
| { 0, NULL, 0, 0 } | |
| }; | |
| static struct intr_info mps_stat_tx_intr_info[] = { | |
| { 0xfffff, "MPS statistics Tx FIFO parity error", -1, 1 }, | |
| { 0, NULL, 0, 0 } | |
| }; | |
| static struct intr_info mps_stat_rx_intr_info[] = { | |
| { 0xffffff, "MPS statistics Rx FIFO parity error", -1, 1 }, | |
| { 0, NULL, 0, 0 } | |
| }; | |
| static struct intr_info mps_cls_intr_info[] = { | |
| { MATCHSRAM_F, "MPS match SRAM parity error", -1, 1 }, | |
| { MATCHTCAM_F, "MPS match TCAM parity error", -1, 1 }, | |
| { HASHSRAM_F, "MPS hash SRAM parity error", -1, 1 }, | |
| { 0, NULL, 0, 0 } | |
| }; | |
| int fat; | |
| fat = csio_handle_intr_status(hw, MPS_RX_PERR_INT_CAUSE_A, | |
| mps_rx_intr_info) + | |
| csio_handle_intr_status(hw, MPS_TX_INT_CAUSE_A, | |
| mps_tx_intr_info) + | |
| csio_handle_intr_status(hw, MPS_TRC_INT_CAUSE_A, | |
| mps_trc_intr_info) + | |
| csio_handle_intr_status(hw, MPS_STAT_PERR_INT_CAUSE_SRAM_A, | |
| mps_stat_sram_intr_info) + | |
| csio_handle_intr_status(hw, MPS_STAT_PERR_INT_CAUSE_TX_FIFO_A, | |
| mps_stat_tx_intr_info) + | |
| csio_handle_intr_status(hw, MPS_STAT_PERR_INT_CAUSE_RX_FIFO_A, | |
| mps_stat_rx_intr_info) + | |
| csio_handle_intr_status(hw, MPS_CLS_INT_CAUSE_A, | |
| mps_cls_intr_info); | |
| csio_wr_reg32(hw, 0, MPS_INT_CAUSE_A); | |
| csio_rd_reg32(hw, MPS_INT_CAUSE_A); /* flush */ | |
| if (fat) | |
| csio_hw_fatal_err(hw); | |
| } | |
| #define MEM_INT_MASK (PERR_INT_CAUSE_F | ECC_CE_INT_CAUSE_F | \ | |
| ECC_UE_INT_CAUSE_F) | |
| /* | |
| * EDC/MC interrupt handler. | |
| */ | |
| static void csio_mem_intr_handler(struct csio_hw *hw, int idx) | |
| { | |
| static const char name[3][5] = { "EDC0", "EDC1", "MC" }; | |
| unsigned int addr, cnt_addr, v; | |
| if (idx <= MEM_EDC1) { | |
| addr = EDC_REG(EDC_INT_CAUSE_A, idx); | |
| cnt_addr = EDC_REG(EDC_ECC_STATUS_A, idx); | |
| } else { | |
| addr = MC_INT_CAUSE_A; | |
| cnt_addr = MC_ECC_STATUS_A; | |
| } | |
| v = csio_rd_reg32(hw, addr) & MEM_INT_MASK; | |
| if (v & PERR_INT_CAUSE_F) | |
| csio_fatal(hw, "%s FIFO parity error\n", name[idx]); | |
| if (v & ECC_CE_INT_CAUSE_F) { | |
| uint32_t cnt = ECC_CECNT_G(csio_rd_reg32(hw, cnt_addr)); | |
| csio_wr_reg32(hw, ECC_CECNT_V(ECC_CECNT_M), cnt_addr); | |
| csio_warn(hw, "%u %s correctable ECC data error%s\n", | |
| cnt, name[idx], cnt > 1 ? "s" : ""); | |
| } | |
| if (v & ECC_UE_INT_CAUSE_F) | |
| csio_fatal(hw, "%s uncorrectable ECC data error\n", name[idx]); | |
| csio_wr_reg32(hw, v, addr); | |
| if (v & (PERR_INT_CAUSE_F | ECC_UE_INT_CAUSE_F)) | |
| csio_hw_fatal_err(hw); | |
| } | |
| /* | |
| * MA interrupt handler. | |
| */ | |
| static void csio_ma_intr_handler(struct csio_hw *hw) | |
| { | |
| uint32_t v, status = csio_rd_reg32(hw, MA_INT_CAUSE_A); | |
| if (status & MEM_PERR_INT_CAUSE_F) | |
| csio_fatal(hw, "MA parity error, parity status %#x\n", | |
| csio_rd_reg32(hw, MA_PARITY_ERROR_STATUS_A)); | |
| if (status & MEM_WRAP_INT_CAUSE_F) { | |
| v = csio_rd_reg32(hw, MA_INT_WRAP_STATUS_A); | |
| csio_fatal(hw, | |
| "MA address wrap-around error by client %u to address %#x\n", | |
| MEM_WRAP_CLIENT_NUM_G(v), MEM_WRAP_ADDRESS_G(v) << 4); | |
| } | |
| csio_wr_reg32(hw, status, MA_INT_CAUSE_A); | |
| csio_hw_fatal_err(hw); | |
| } | |
| /* | |
| * SMB interrupt handler. | |
| */ | |
| static void csio_smb_intr_handler(struct csio_hw *hw) | |
| { | |
| static struct intr_info smb_intr_info[] = { | |
| { MSTTXFIFOPARINT_F, "SMB master Tx FIFO parity error", -1, 1 }, | |
| { MSTRXFIFOPARINT_F, "SMB master Rx FIFO parity error", -1, 1 }, | |
| { SLVFIFOPARINT_F, "SMB slave FIFO parity error", -1, 1 }, | |
| { 0, NULL, 0, 0 } | |
| }; | |
| if (csio_handle_intr_status(hw, SMB_INT_CAUSE_A, smb_intr_info)) | |
| csio_hw_fatal_err(hw); | |
| } | |
| /* | |
| * NC-SI interrupt handler. | |
| */ | |
| static void csio_ncsi_intr_handler(struct csio_hw *hw) | |
| { | |
| static struct intr_info ncsi_intr_info[] = { | |
| { CIM_DM_PRTY_ERR_F, "NC-SI CIM parity error", -1, 1 }, | |
| { MPS_DM_PRTY_ERR_F, "NC-SI MPS parity error", -1, 1 }, | |
| { TXFIFO_PRTY_ERR_F, "NC-SI Tx FIFO parity error", -1, 1 }, | |
| { RXFIFO_PRTY_ERR_F, "NC-SI Rx FIFO parity error", -1, 1 }, | |
| { 0, NULL, 0, 0 } | |
| }; | |
| if (csio_handle_intr_status(hw, NCSI_INT_CAUSE_A, ncsi_intr_info)) | |
| csio_hw_fatal_err(hw); | |
| } | |
| /* | |
| * XGMAC interrupt handler. | |
| */ | |
| static void csio_xgmac_intr_handler(struct csio_hw *hw, int port) | |
| { | |
| uint32_t v = csio_rd_reg32(hw, T5_PORT_REG(port, MAC_PORT_INT_CAUSE_A)); | |
| v &= TXFIFO_PRTY_ERR_F | RXFIFO_PRTY_ERR_F; | |
| if (!v) | |
| return; | |
| if (v & TXFIFO_PRTY_ERR_F) | |
| csio_fatal(hw, "XGMAC %d Tx FIFO parity error\n", port); | |
| if (v & RXFIFO_PRTY_ERR_F) | |
| csio_fatal(hw, "XGMAC %d Rx FIFO parity error\n", port); | |
| csio_wr_reg32(hw, v, T5_PORT_REG(port, MAC_PORT_INT_CAUSE_A)); | |
| csio_hw_fatal_err(hw); | |
| } | |
| /* | |
| * PL interrupt handler. | |
| */ | |
| static void csio_pl_intr_handler(struct csio_hw *hw) | |
| { | |
| static struct intr_info pl_intr_info[] = { | |
| { FATALPERR_F, "T4 fatal parity error", -1, 1 }, | |
| { PERRVFID_F, "PL VFID_MAP parity error", -1, 1 }, | |
| { 0, NULL, 0, 0 } | |
| }; | |
| if (csio_handle_intr_status(hw, PL_PL_INT_CAUSE_A, pl_intr_info)) | |
| csio_hw_fatal_err(hw); | |
| } | |
| /* | |
| * csio_hw_slow_intr_handler - control path interrupt handler | |
| * @hw: HW module | |
| * | |
| * Interrupt handler for non-data global interrupt events, e.g., errors. | |
| * The designation 'slow' is because it involves register reads, while | |
| * data interrupts typically don't involve any MMIOs. | |
| */ | |
| int | |
| csio_hw_slow_intr_handler(struct csio_hw *hw) | |
| { | |
| uint32_t cause = csio_rd_reg32(hw, PL_INT_CAUSE_A); | |
| if (!(cause & CSIO_GLBL_INTR_MASK)) { | |
| CSIO_INC_STATS(hw, n_plint_unexp); | |
| return 0; | |
| } | |
| csio_dbg(hw, "Slow interrupt! cause: 0x%x\n", cause); | |
| CSIO_INC_STATS(hw, n_plint_cnt); | |
| if (cause & CIM_F) | |
| csio_cim_intr_handler(hw); | |
| if (cause & MPS_F) | |
| csio_mps_intr_handler(hw); | |
| if (cause & NCSI_F) | |
| csio_ncsi_intr_handler(hw); | |
| if (cause & PL_F) | |
| csio_pl_intr_handler(hw); | |
| if (cause & SMB_F) | |
| csio_smb_intr_handler(hw); | |
| if (cause & XGMAC0_F) | |
| csio_xgmac_intr_handler(hw, 0); | |
| if (cause & XGMAC1_F) | |
| csio_xgmac_intr_handler(hw, 1); | |
| if (cause & XGMAC_KR0_F) | |
| csio_xgmac_intr_handler(hw, 2); | |
| if (cause & XGMAC_KR1_F) | |
| csio_xgmac_intr_handler(hw, 3); | |
| if (cause & PCIE_F) | |
| hw->chip_ops->chip_pcie_intr_handler(hw); | |
| if (cause & MC_F) | |
| csio_mem_intr_handler(hw, MEM_MC); | |
| if (cause & EDC0_F) | |
| csio_mem_intr_handler(hw, MEM_EDC0); | |
| if (cause & EDC1_F) | |
| csio_mem_intr_handler(hw, MEM_EDC1); | |
| if (cause & LE_F) | |
| csio_le_intr_handler(hw); | |
| if (cause & TP_F) | |
| csio_tp_intr_handler(hw); | |
| if (cause & MA_F) | |
| csio_ma_intr_handler(hw); | |
| if (cause & PM_TX_F) | |
| csio_pmtx_intr_handler(hw); | |
| if (cause & PM_RX_F) | |
| csio_pmrx_intr_handler(hw); | |
| if (cause & ULP_RX_F) | |
| csio_ulprx_intr_handler(hw); | |
| if (cause & CPL_SWITCH_F) | |
| csio_cplsw_intr_handler(hw); | |
| if (cause & SGE_F) | |
| csio_sge_intr_handler(hw); | |
| if (cause & ULP_TX_F) | |
| csio_ulptx_intr_handler(hw); | |
| /* Clear the interrupts just processed for which we are the master. */ | |
| csio_wr_reg32(hw, cause & CSIO_GLBL_INTR_MASK, PL_INT_CAUSE_A); | |
| csio_rd_reg32(hw, PL_INT_CAUSE_A); /* flush */ | |
| return 1; | |
| } | |
| /***************************************************************************** | |
| * HW <--> mailbox interfacing routines. | |
| ****************************************************************************/ | |
| /* | |
| * csio_mberr_worker - Worker thread (dpc) for mailbox/error completions | |
| * | |
| * @data: Private data pointer. | |
| * | |
| * Called from worker thread context. | |
| */ | |
| static void | |
| csio_mberr_worker(void *data) | |
| { | |
| struct csio_hw *hw = (struct csio_hw *)data; | |
| struct csio_mbm *mbm = &hw->mbm; | |
| LIST_HEAD(cbfn_q); | |
| struct csio_mb *mbp_next; | |
| int rv; | |
| del_timer_sync(&mbm->timer); | |
| spin_lock_irq(&hw->lock); | |
| if (list_empty(&mbm->cbfn_q)) { | |
| spin_unlock_irq(&hw->lock); | |
| return; | |
| } | |
| list_splice_tail_init(&mbm->cbfn_q, &cbfn_q); | |
| mbm->stats.n_cbfnq = 0; | |
| /* Try to start waiting mailboxes */ | |
| if (!list_empty(&mbm->req_q)) { | |
| mbp_next = list_first_entry(&mbm->req_q, struct csio_mb, list); | |
| list_del_init(&mbp_next->list); | |
| rv = csio_mb_issue(hw, mbp_next); | |
| if (rv != 0) | |
| list_add_tail(&mbp_next->list, &mbm->req_q); | |
| else | |
| CSIO_DEC_STATS(mbm, n_activeq); | |
| } | |
| spin_unlock_irq(&hw->lock); | |
| /* Now callback completions */ | |
| csio_mb_completions(hw, &cbfn_q); | |
| } | |
| /* | |
| * csio_hw_mb_timer - Top-level Mailbox timeout handler. | |
| * | |
| * @data: private data pointer | |
| * | |
| **/ | |
| static void | |
| csio_hw_mb_timer(uintptr_t data) | |
| { | |
| struct csio_hw *hw = (struct csio_hw *)data; | |
| struct csio_mb *mbp = NULL; | |
| spin_lock_irq(&hw->lock); | |
| mbp = csio_mb_tmo_handler(hw); | |
| spin_unlock_irq(&hw->lock); | |
| /* Call back the function for the timed-out Mailbox */ | |
| if (mbp) | |
| mbp->mb_cbfn(hw, mbp); | |
| } | |
| /* | |
| * csio_hw_mbm_cleanup - Cleanup Mailbox module. | |
| * @hw: HW module | |
| * | |
| * Called with lock held, should exit with lock held. | |
| * Cancels outstanding mailboxes (waiting, in-flight) and gathers them | |
| * into a local queue. Drops lock and calls the completions. Holds | |
| * lock and returns. | |
| */ | |
| static void | |
| csio_hw_mbm_cleanup(struct csio_hw *hw) | |
| { | |
| LIST_HEAD(cbfn_q); | |
| csio_mb_cancel_all(hw, &cbfn_q); | |
| spin_unlock_irq(&hw->lock); | |
| csio_mb_completions(hw, &cbfn_q); | |
| spin_lock_irq(&hw->lock); | |
| } | |
| /***************************************************************************** | |
| * Event handling | |
| ****************************************************************************/ | |
| int | |
| csio_enqueue_evt(struct csio_hw *hw, enum csio_evt type, void *evt_msg, | |
| uint16_t len) | |
| { | |
| struct csio_evt_msg *evt_entry = NULL; | |
| if (type >= CSIO_EVT_MAX) | |
| return -EINVAL; | |
| if (len > CSIO_EVT_MSG_SIZE) | |
| return -EINVAL; | |
| if (hw->flags & CSIO_HWF_FWEVT_STOP) | |
| return -EINVAL; | |
| if (list_empty(&hw->evt_free_q)) { | |
| csio_err(hw, "Failed to alloc evt entry, msg type %d len %d\n", | |
| type, len); | |
| return -ENOMEM; | |
| } | |
| evt_entry = list_first_entry(&hw->evt_free_q, | |
| struct csio_evt_msg, list); | |
| list_del_init(&evt_entry->list); | |
| /* copy event msg and queue the event */ | |
| evt_entry->type = type; | |
| memcpy((void *)evt_entry->data, evt_msg, len); | |
| list_add_tail(&evt_entry->list, &hw->evt_active_q); | |
| CSIO_DEC_STATS(hw, n_evt_freeq); | |
| CSIO_INC_STATS(hw, n_evt_activeq); | |
| return 0; | |
| } | |
| static int | |
| csio_enqueue_evt_lock(struct csio_hw *hw, enum csio_evt type, void *evt_msg, | |
| uint16_t len, bool msg_sg) | |
| { | |
| struct csio_evt_msg *evt_entry = NULL; | |
| struct csio_fl_dma_buf *fl_sg; | |
| uint32_t off = 0; | |
| unsigned long flags; | |
| int n, ret = 0; | |
| if (type >= CSIO_EVT_MAX) | |
| return -EINVAL; | |
| if (len > CSIO_EVT_MSG_SIZE) | |
| return -EINVAL; | |
| spin_lock_irqsave(&hw->lock, flags); | |
| if (hw->flags & CSIO_HWF_FWEVT_STOP) { | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| if (list_empty(&hw->evt_free_q)) { | |
| csio_err(hw, "Failed to alloc evt entry, msg type %d len %d\n", | |
| type, len); | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| evt_entry = list_first_entry(&hw->evt_free_q, | |
| struct csio_evt_msg, list); | |
| list_del_init(&evt_entry->list); | |
| /* copy event msg and queue the event */ | |
| evt_entry->type = type; | |
| /* If Payload in SG list*/ | |
| if (msg_sg) { | |
| fl_sg = (struct csio_fl_dma_buf *) evt_msg; | |
| for (n = 0; (n < CSIO_MAX_FLBUF_PER_IQWR && off < len); n++) { | |
| memcpy((void *)((uintptr_t)evt_entry->data + off), | |
| fl_sg->flbufs[n].vaddr, | |
| fl_sg->flbufs[n].len); | |
| off += fl_sg->flbufs[n].len; | |
| } | |
| } else | |
| memcpy((void *)evt_entry->data, evt_msg, len); | |
| list_add_tail(&evt_entry->list, &hw->evt_active_q); | |
| CSIO_DEC_STATS(hw, n_evt_freeq); | |
| CSIO_INC_STATS(hw, n_evt_activeq); | |
| out: | |
| spin_unlock_irqrestore(&hw->lock, flags); | |
| return ret; | |
| } | |
| static void | |
| csio_free_evt(struct csio_hw *hw, struct csio_evt_msg *evt_entry) | |
| { | |
| if (evt_entry) { | |
| spin_lock_irq(&hw->lock); | |
| list_del_init(&evt_entry->list); | |
| list_add_tail(&evt_entry->list, &hw->evt_free_q); | |
| CSIO_DEC_STATS(hw, n_evt_activeq); | |
| CSIO_INC_STATS(hw, n_evt_freeq); | |
| spin_unlock_irq(&hw->lock); | |
| } | |
| } | |
| void | |
| csio_evtq_flush(struct csio_hw *hw) | |
| { | |
| uint32_t count; | |
| count = 30; | |
| while (hw->flags & CSIO_HWF_FWEVT_PENDING && count--) { | |
| spin_unlock_irq(&hw->lock); | |
| msleep(2000); | |
| spin_lock_irq(&hw->lock); | |
| } | |
| CSIO_DB_ASSERT(!(hw->flags & CSIO_HWF_FWEVT_PENDING)); | |
| } | |
| static void | |
| csio_evtq_stop(struct csio_hw *hw) | |
| { | |
| hw->flags |= CSIO_HWF_FWEVT_STOP; | |
| } | |
| static void | |
| csio_evtq_start(struct csio_hw *hw) | |
| { | |
| hw->flags &= ~CSIO_HWF_FWEVT_STOP; | |
| } | |
| static void | |
| csio_evtq_cleanup(struct csio_hw *hw) | |
| { | |
| struct list_head *evt_entry, *next_entry; | |
| /* Release outstanding events from activeq to freeq*/ | |
| if (!list_empty(&hw->evt_active_q)) | |
| list_splice_tail_init(&hw->evt_active_q, &hw->evt_free_q); | |
| hw->stats.n_evt_activeq = 0; | |
| hw->flags &= ~CSIO_HWF_FWEVT_PENDING; | |
| /* Freeup event entry */ | |
| list_for_each_safe(evt_entry, next_entry, &hw->evt_free_q) { | |
| kfree(evt_entry); | |
| CSIO_DEC_STATS(hw, n_evt_freeq); | |
| } | |
| hw->stats.n_evt_freeq = 0; | |
| } | |
| static void | |
| csio_process_fwevtq_entry(struct csio_hw *hw, void *wr, uint32_t len, | |
| struct csio_fl_dma_buf *flb, void *priv) | |
| { | |
| __u8 op; | |
| void *msg = NULL; | |
| uint32_t msg_len = 0; | |
| bool msg_sg = 0; | |
| op = ((struct rss_header *) wr)->opcode; | |
| if (op == CPL_FW6_PLD) { | |
| CSIO_INC_STATS(hw, n_cpl_fw6_pld); | |
| if (!flb || !flb->totlen) { | |
| CSIO_INC_STATS(hw, n_cpl_unexp); | |
| return; | |
| } | |
| msg = (void *) flb; | |
| msg_len = flb->totlen; | |
| msg_sg = 1; | |
| } else if (op == CPL_FW6_MSG || op == CPL_FW4_MSG) { | |
| CSIO_INC_STATS(hw, n_cpl_fw6_msg); | |
| /* skip RSS header */ | |
| msg = (void *)((uintptr_t)wr + sizeof(__be64)); | |
| msg_len = (op == CPL_FW6_MSG) ? sizeof(struct cpl_fw6_msg) : | |
| sizeof(struct cpl_fw4_msg); | |
| } else { | |
| csio_warn(hw, "unexpected CPL %#x on FW event queue\n", op); | |
| CSIO_INC_STATS(hw, n_cpl_unexp); | |
| return; | |
| } | |
| /* | |
| * Enqueue event to EventQ. Events processing happens | |
| * in Event worker thread context | |
| */ | |
| if (csio_enqueue_evt_lock(hw, CSIO_EVT_FW, msg, | |
| (uint16_t)msg_len, msg_sg)) | |
| CSIO_INC_STATS(hw, n_evt_drop); | |
| } | |
| void | |
| csio_evtq_worker(struct work_struct *work) | |
| { | |
| struct csio_hw *hw = container_of(work, struct csio_hw, evtq_work); | |
| struct list_head *evt_entry, *next_entry; | |
| LIST_HEAD(evt_q); | |
| struct csio_evt_msg *evt_msg; | |
| struct cpl_fw6_msg *msg; | |
| struct csio_rnode *rn; | |
| int rv = 0; | |
| uint8_t evtq_stop = 0; | |
| csio_dbg(hw, "event worker thread active evts#%d\n", | |
| hw->stats.n_evt_activeq); | |
| spin_lock_irq(&hw->lock); | |
| while (!list_empty(&hw->evt_active_q)) { | |
| list_splice_tail_init(&hw->evt_active_q, &evt_q); | |
| spin_unlock_irq(&hw->lock); | |
| list_for_each_safe(evt_entry, next_entry, &evt_q) { | |
| evt_msg = (struct csio_evt_msg *) evt_entry; | |
| /* Drop events if queue is STOPPED */ | |
| spin_lock_irq(&hw->lock); | |
| if (hw->flags & CSIO_HWF_FWEVT_STOP) | |
| evtq_stop = 1; | |
| spin_unlock_irq(&hw->lock); | |
| if (evtq_stop) { | |
| CSIO_INC_STATS(hw, n_evt_drop); | |
| goto free_evt; | |
| } | |
| switch (evt_msg->type) { | |
| case CSIO_EVT_FW: | |
| msg = (struct cpl_fw6_msg *)(evt_msg->data); | |
| if ((msg->opcode == CPL_FW6_MSG || | |
| msg->opcode == CPL_FW4_MSG) && | |
| !msg->type) { | |
| rv = csio_mb_fwevt_handler(hw, | |
| msg->data); | |
| if (!rv) | |
| break; | |
| /* Handle any remaining fw events */ | |
| csio_fcoe_fwevt_handler(hw, | |
| msg->opcode, msg->data); | |
| } else if (msg->opcode == CPL_FW6_PLD) { | |
| csio_fcoe_fwevt_handler(hw, | |
| msg->opcode, msg->data); | |
| } else { | |
| csio_warn(hw, | |
| "Unhandled FW msg op %x type %x\n", | |
| msg->opcode, msg->type); | |
| CSIO_INC_STATS(hw, n_evt_drop); | |
| } | |
| break; | |
| case CSIO_EVT_MBX: | |
| csio_mberr_worker(hw); | |
| break; | |
| case CSIO_EVT_DEV_LOSS: | |
| memcpy(&rn, evt_msg->data, sizeof(rn)); | |
| csio_rnode_devloss_handler(rn); | |
| break; | |
| default: | |
| csio_warn(hw, "Unhandled event %x on evtq\n", | |
| evt_msg->type); | |
| CSIO_INC_STATS(hw, n_evt_unexp); | |
| break; | |
| } | |
| free_evt: | |
| csio_free_evt(hw, evt_msg); | |
| } | |
| spin_lock_irq(&hw->lock); | |
| } | |
| hw->flags &= ~CSIO_HWF_FWEVT_PENDING; | |
| spin_unlock_irq(&hw->lock); | |
| } | |
| int | |
| csio_fwevtq_handler(struct csio_hw *hw) | |
| { | |
| int rv; | |
| if (csio_q_iqid(hw, hw->fwevt_iq_idx) == CSIO_MAX_QID) { | |
| CSIO_INC_STATS(hw, n_int_stray); | |
| return -EINVAL; | |
| } | |
| rv = csio_wr_process_iq_idx(hw, hw->fwevt_iq_idx, | |
| csio_process_fwevtq_entry, NULL); | |
| return rv; | |
| } | |
| /**************************************************************************** | |
| * Entry points | |
| ****************************************************************************/ | |
| /* Management module */ | |
| /* | |
| * csio_mgmt_req_lookup - Lookup the given IO req exist in Active Q. | |
| * mgmt - mgmt module | |
| * @io_req - io request | |
| * | |
| * Return - 0:if given IO Req exists in active Q. | |
| * -EINVAL :if lookup fails. | |
| */ | |
| int | |
| csio_mgmt_req_lookup(struct csio_mgmtm *mgmtm, struct csio_ioreq *io_req) | |
| { | |
| struct list_head *tmp; | |
| /* Lookup ioreq in the ACTIVEQ */ | |
| list_for_each(tmp, &mgmtm->active_q) { | |
| if (io_req == (struct csio_ioreq *)tmp) | |
| return 0; | |
| } | |
| return -EINVAL; | |
| } | |
| #define ECM_MIN_TMO 1000 /* Minimum timeout value for req */ | |
| /* | |
| * csio_mgmts_tmo_handler - MGMT IO Timeout handler. | |
| * @data - Event data. | |
| * | |
| * Return - none. | |
| */ | |
| static void | |
| csio_mgmt_tmo_handler(uintptr_t data) | |
| { | |
| struct csio_mgmtm *mgmtm = (struct csio_mgmtm *) data; | |
| struct list_head *tmp; | |
| struct csio_ioreq *io_req; | |
| csio_dbg(mgmtm->hw, "Mgmt timer invoked!\n"); | |
| spin_lock_irq(&mgmtm->hw->lock); | |
| list_for_each(tmp, &mgmtm->active_q) { | |
| io_req = (struct csio_ioreq *) tmp; | |
| io_req->tmo -= min_t(uint32_t, io_req->tmo, ECM_MIN_TMO); | |
| if (!io_req->tmo) { | |
| /* Dequeue the request from retry Q. */ | |
| tmp = csio_list_prev(tmp); | |
| list_del_init(&io_req->sm.sm_list); | |
| if (io_req->io_cbfn) { | |
| /* io_req will be freed by completion handler */ | |
| io_req->wr_status = -ETIMEDOUT; | |
| io_req->io_cbfn(mgmtm->hw, io_req); | |
| } else { | |
| CSIO_DB_ASSERT(0); | |
| } | |
| } | |
| } | |
| /* If retry queue is not empty, re-arm timer */ | |
| if (!list_empty(&mgmtm->active_q)) | |
| mod_timer(&mgmtm->mgmt_timer, | |
| jiffies + msecs_to_jiffies(ECM_MIN_TMO)); | |
| spin_unlock_irq(&mgmtm->hw->lock); | |
| } | |
| static void | |
| csio_mgmtm_cleanup(struct csio_mgmtm *mgmtm) | |
| { | |
| struct csio_hw *hw = mgmtm->hw; | |
| struct csio_ioreq *io_req; | |
| struct list_head *tmp; | |
| uint32_t count; | |
| count = 30; | |
| /* Wait for all outstanding req to complete gracefully */ | |
| while ((!list_empty(&mgmtm->active_q)) && count--) { | |
| spin_unlock_irq(&hw->lock); | |
| msleep(2000); | |
| spin_lock_irq(&hw->lock); | |
| } | |
| /* release outstanding req from ACTIVEQ */ | |
| list_for_each(tmp, &mgmtm->active_q) { | |
| io_req = (struct csio_ioreq *) tmp; | |
| tmp = csio_list_prev(tmp); | |
| list_del_init(&io_req->sm.sm_list); | |
| mgmtm->stats.n_active--; | |
| if (io_req->io_cbfn) { | |
| /* io_req will be freed by completion handler */ | |
| io_req->wr_status = -ETIMEDOUT; | |
| io_req->io_cbfn(mgmtm->hw, io_req); | |
| } | |
| } | |
| } | |
| /* | |
| * csio_mgmt_init - Mgmt module init entry point | |
| * @mgmtsm - mgmt module | |
| * @hw - HW module | |
| * | |
| * Initialize mgmt timer, resource wait queue, active queue, | |
| * completion q. Allocate Egress and Ingress | |
| * WR queues and save off the queue index returned by the WR | |
| * module for future use. Allocate and save off mgmt reqs in the | |
| * mgmt_req_freelist for future use. Make sure their SM is initialized | |
| * to uninit state. | |
| * Returns: 0 - on success | |
| * -ENOMEM - on error. | |
| */ | |
| static int | |
| csio_mgmtm_init(struct csio_mgmtm *mgmtm, struct csio_hw *hw) | |
| { | |
| struct timer_list *timer = &mgmtm->mgmt_timer; | |
| init_timer(timer); | |
| timer->function = csio_mgmt_tmo_handler; | |
| timer->data = (unsigned long)mgmtm; | |
| INIT_LIST_HEAD(&mgmtm->active_q); | |
| INIT_LIST_HEAD(&mgmtm->cbfn_q); | |
| mgmtm->hw = hw; | |
| /*mgmtm->iq_idx = hw->fwevt_iq_idx;*/ | |
| return 0; | |
| } | |
| /* | |
| * csio_mgmtm_exit - MGMT module exit entry point | |
| * @mgmtsm - mgmt module | |
| * | |
| * This function called during MGMT module uninit. | |
| * Stop timers, free ioreqs allocated. | |
| * Returns: None | |
| * | |
| */ | |
| static void | |
| csio_mgmtm_exit(struct csio_mgmtm *mgmtm) | |
| { | |
| del_timer_sync(&mgmtm->mgmt_timer); | |
| } | |
| /** | |
| * csio_hw_start - Kicks off the HW State machine | |
| * @hw: Pointer to HW module. | |
| * | |
| * It is assumed that the initialization is a synchronous operation. | |
| * So when we return afer posting the event, the HW SM should be in | |
| * the ready state, if there were no errors during init. | |
| */ | |
| int | |
| csio_hw_start(struct csio_hw *hw) | |
| { | |
| spin_lock_irq(&hw->lock); | |
| csio_post_event(&hw->sm, CSIO_HWE_CFG); | |
| spin_unlock_irq(&hw->lock); | |
| if (csio_is_hw_ready(hw)) | |
| return 0; | |
| else | |
| return -EINVAL; | |
| } | |
| int | |
| csio_hw_stop(struct csio_hw *hw) | |
| { | |
| csio_post_event(&hw->sm, CSIO_HWE_PCI_REMOVE); | |
| if (csio_is_hw_removing(hw)) | |
| return 0; | |
| else | |
| return -EINVAL; | |
| } | |
| /* Max reset retries */ | |
| #define CSIO_MAX_RESET_RETRIES 3 | |
| /** | |
| * csio_hw_reset - Reset the hardware | |
| * @hw: HW module. | |
| * | |
| * Caller should hold lock across this function. | |
| */ | |
| int | |
| csio_hw_reset(struct csio_hw *hw) | |
| { | |
| if (!csio_is_hw_master(hw)) | |
| return -EPERM; | |
| if (hw->rst_retries >= CSIO_MAX_RESET_RETRIES) { | |
| csio_dbg(hw, "Max hw reset attempts reached.."); | |
| return -EINVAL; | |
| } | |
| hw->rst_retries++; | |
| csio_post_event(&hw->sm, CSIO_HWE_HBA_RESET); | |
| if (csio_is_hw_ready(hw)) { | |
| hw->rst_retries = 0; | |
| hw->stats.n_reset_start = jiffies_to_msecs(jiffies); | |
| return 0; | |
| } else | |
| return -EINVAL; | |
| } | |
| /* | |
| * csio_hw_get_device_id - Caches the Adapter's vendor & device id. | |
| * @hw: HW module. | |
| */ | |
| static void | |
| csio_hw_get_device_id(struct csio_hw *hw) | |
| { | |
| /* Is the adapter device id cached already ?*/ | |
| if (csio_is_dev_id_cached(hw)) | |
| return; | |
| /* Get the PCI vendor & device id */ | |
| pci_read_config_word(hw->pdev, PCI_VENDOR_ID, | |
| &hw->params.pci.vendor_id); | |
| pci_read_config_word(hw->pdev, PCI_DEVICE_ID, | |
| &hw->params.pci.device_id); | |
| csio_dev_id_cached(hw); | |
| hw->chip_id = (hw->params.pci.device_id & CSIO_HW_CHIP_MASK); | |
| } /* csio_hw_get_device_id */ | |
| /* | |
| * csio_hw_set_description - Set the model, description of the hw. | |
| * @hw: HW module. | |
| * @ven_id: PCI Vendor ID | |
| * @dev_id: PCI Device ID | |
| */ | |
| static void | |
| csio_hw_set_description(struct csio_hw *hw, uint16_t ven_id, uint16_t dev_id) | |
| { | |
| uint32_t adap_type, prot_type; | |
| if (ven_id == CSIO_VENDOR_ID) { | |
| prot_type = (dev_id & CSIO_ASIC_DEVID_PROTO_MASK); | |
| adap_type = (dev_id & CSIO_ASIC_DEVID_TYPE_MASK); | |
| if (prot_type == CSIO_T5_FCOE_ASIC) { | |
| memcpy(hw->hw_ver, | |
| csio_t5_fcoe_adapters[adap_type].model_no, 16); | |
| memcpy(hw->model_desc, | |
| csio_t5_fcoe_adapters[adap_type].description, | |
| 32); | |
| } else { | |
| char tempName[32] = "Chelsio FCoE Controller"; | |
| memcpy(hw->model_desc, tempName, 32); | |
| } | |
| } | |
| } /* csio_hw_set_description */ | |
| /** | |
| * csio_hw_init - Initialize HW module. | |
| * @hw: Pointer to HW module. | |
| * | |
| * Initialize the members of the HW module. | |
| */ | |
| int | |
| csio_hw_init(struct csio_hw *hw) | |
| { | |
| int rv = -EINVAL; | |
| uint32_t i; | |
| uint16_t ven_id, dev_id; | |
| struct csio_evt_msg *evt_entry; | |
| INIT_LIST_HEAD(&hw->sm.sm_list); | |
| csio_init_state(&hw->sm, csio_hws_uninit); | |
| spin_lock_init(&hw->lock); | |
| INIT_LIST_HEAD(&hw->sln_head); | |
| /* Get the PCI vendor & device id */ | |
| csio_hw_get_device_id(hw); | |
| strcpy(hw->name, CSIO_HW_NAME); | |
| /* Initialize the HW chip ops T5 specific ops */ | |
| hw->chip_ops = &t5_ops; | |
| /* Set the model & its description */ | |
| ven_id = hw->params.pci.vendor_id; | |
| dev_id = hw->params.pci.device_id; | |
| csio_hw_set_description(hw, ven_id, dev_id); | |
| /* Initialize default log level */ | |
| hw->params.log_level = (uint32_t) csio_dbg_level; | |
| csio_set_fwevt_intr_idx(hw, -1); | |
| csio_set_nondata_intr_idx(hw, -1); | |
| /* Init all the modules: Mailbox, WorkRequest and Transport */ | |
| if (csio_mbm_init(csio_hw_to_mbm(hw), hw, csio_hw_mb_timer)) | |
| goto err; | |
| rv = csio_wrm_init(csio_hw_to_wrm(hw), hw); | |
| if (rv) | |
| goto err_mbm_exit; | |
| rv = csio_scsim_init(csio_hw_to_scsim(hw), hw); | |
| if (rv) | |
| goto err_wrm_exit; | |
| rv = csio_mgmtm_init(csio_hw_to_mgmtm(hw), hw); | |
| if (rv) | |
| goto err_scsim_exit; | |
| /* Pre-allocate evtq and initialize them */ | |
| INIT_LIST_HEAD(&hw->evt_active_q); | |
| INIT_LIST_HEAD(&hw->evt_free_q); | |
| for (i = 0; i < csio_evtq_sz; i++) { | |
| evt_entry = kzalloc(sizeof(struct csio_evt_msg), GFP_KERNEL); | |
| if (!evt_entry) { | |
| rv = -ENOMEM; | |
| csio_err(hw, "Failed to initialize eventq"); | |
| goto err_evtq_cleanup; | |
| } | |
| list_add_tail(&evt_entry->list, &hw->evt_free_q); | |
| CSIO_INC_STATS(hw, n_evt_freeq); | |
| } | |
| hw->dev_num = dev_num; | |
| dev_num++; | |
| return 0; | |
| err_evtq_cleanup: | |
| csio_evtq_cleanup(hw); | |
| csio_mgmtm_exit(csio_hw_to_mgmtm(hw)); | |
| err_scsim_exit: | |
| csio_scsim_exit(csio_hw_to_scsim(hw)); | |
| err_wrm_exit: | |
| csio_wrm_exit(csio_hw_to_wrm(hw), hw); | |
| err_mbm_exit: | |
| csio_mbm_exit(csio_hw_to_mbm(hw)); | |
| err: | |
| return rv; | |
| } | |
| /** | |
| * csio_hw_exit - Un-initialize HW module. | |
| * @hw: Pointer to HW module. | |
| * | |
| */ | |
| void | |
| csio_hw_exit(struct csio_hw *hw) | |
| { | |
| csio_evtq_cleanup(hw); | |
| csio_mgmtm_exit(csio_hw_to_mgmtm(hw)); | |
| csio_scsim_exit(csio_hw_to_scsim(hw)); | |
| csio_wrm_exit(csio_hw_to_wrm(hw), hw); | |
| csio_mbm_exit(csio_hw_to_mbm(hw)); | |
| } |