| /* | |
| * LSI/Engenio/NetApp E-Series RDAC SCSI Device Handler | |
| * | |
| * Copyright (C) 2005 Mike Christie. All rights reserved. | |
| * Copyright (C) Chandra Seetharaman, IBM Corp. 2007 | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | |
| * | |
| */ | |
| #include <scsi/scsi.h> | |
| #include <scsi/scsi_eh.h> | |
| #include <scsi/scsi_dh.h> | |
| #include <linux/workqueue.h> | |
| #include <linux/slab.h> | |
| #include <linux/module.h> | |
| #define RDAC_NAME "rdac" | |
| #define RDAC_RETRY_COUNT 5 | |
| /* | |
| * LSI mode page stuff | |
| * | |
| * These struct definitions and the forming of the | |
| * mode page were taken from the LSI RDAC 2.4 GPL'd | |
| * driver, and then converted to Linux conventions. | |
| */ | |
| #define RDAC_QUIESCENCE_TIME 20 | |
| /* | |
| * Page Codes | |
| */ | |
| #define RDAC_PAGE_CODE_REDUNDANT_CONTROLLER 0x2c | |
| /* | |
| * Controller modes definitions | |
| */ | |
| #define RDAC_MODE_TRANSFER_SPECIFIED_LUNS 0x02 | |
| /* | |
| * RDAC Options field | |
| */ | |
| #define RDAC_FORCED_QUIESENCE 0x02 | |
| #define RDAC_TIMEOUT (60 * HZ) | |
| #define RDAC_RETRIES 3 | |
| struct rdac_mode_6_hdr { | |
| u8 data_len; | |
| u8 medium_type; | |
| u8 device_params; | |
| u8 block_desc_len; | |
| }; | |
| struct rdac_mode_10_hdr { | |
| u16 data_len; | |
| u8 medium_type; | |
| u8 device_params; | |
| u16 reserved; | |
| u16 block_desc_len; | |
| }; | |
| struct rdac_mode_common { | |
| u8 controller_serial[16]; | |
| u8 alt_controller_serial[16]; | |
| u8 rdac_mode[2]; | |
| u8 alt_rdac_mode[2]; | |
| u8 quiescence_timeout; | |
| u8 rdac_options; | |
| }; | |
| struct rdac_pg_legacy { | |
| struct rdac_mode_6_hdr hdr; | |
| u8 page_code; | |
| u8 page_len; | |
| struct rdac_mode_common common; | |
| #define MODE6_MAX_LUN 32 | |
| u8 lun_table[MODE6_MAX_LUN]; | |
| u8 reserved2[32]; | |
| u8 reserved3; | |
| u8 reserved4; | |
| }; | |
| struct rdac_pg_expanded { | |
| struct rdac_mode_10_hdr hdr; | |
| u8 page_code; | |
| u8 subpage_code; | |
| u8 page_len[2]; | |
| struct rdac_mode_common common; | |
| u8 lun_table[256]; | |
| u8 reserved3; | |
| u8 reserved4; | |
| }; | |
| struct c9_inquiry { | |
| u8 peripheral_info; | |
| u8 page_code; /* 0xC9 */ | |
| u8 reserved1; | |
| u8 page_len; | |
| u8 page_id[4]; /* "vace" */ | |
| u8 avte_cvp; | |
| u8 path_prio; | |
| u8 reserved2[38]; | |
| }; | |
| #define SUBSYS_ID_LEN 16 | |
| #define SLOT_ID_LEN 2 | |
| #define ARRAY_LABEL_LEN 31 | |
| struct c4_inquiry { | |
| u8 peripheral_info; | |
| u8 page_code; /* 0xC4 */ | |
| u8 reserved1; | |
| u8 page_len; | |
| u8 page_id[4]; /* "subs" */ | |
| u8 subsys_id[SUBSYS_ID_LEN]; | |
| u8 revision[4]; | |
| u8 slot_id[SLOT_ID_LEN]; | |
| u8 reserved[2]; | |
| }; | |
| #define UNIQUE_ID_LEN 16 | |
| struct c8_inquiry { | |
| u8 peripheral_info; | |
| u8 page_code; /* 0xC8 */ | |
| u8 reserved1; | |
| u8 page_len; | |
| u8 page_id[4]; /* "edid" */ | |
| u8 reserved2[3]; | |
| u8 vol_uniq_id_len; | |
| u8 vol_uniq_id[16]; | |
| u8 vol_user_label_len; | |
| u8 vol_user_label[60]; | |
| u8 array_uniq_id_len; | |
| u8 array_unique_id[UNIQUE_ID_LEN]; | |
| u8 array_user_label_len; | |
| u8 array_user_label[60]; | |
| u8 lun[8]; | |
| }; | |
| struct rdac_controller { | |
| u8 array_id[UNIQUE_ID_LEN]; | |
| int use_ms10; | |
| struct kref kref; | |
| struct list_head node; /* list of all controllers */ | |
| union { | |
| struct rdac_pg_legacy legacy; | |
| struct rdac_pg_expanded expanded; | |
| } mode_select; | |
| u8 index; | |
| u8 array_name[ARRAY_LABEL_LEN]; | |
| struct Scsi_Host *host; | |
| spinlock_t ms_lock; | |
| int ms_queued; | |
| struct work_struct ms_work; | |
| struct scsi_device *ms_sdev; | |
| struct list_head ms_head; | |
| struct list_head dh_list; | |
| }; | |
| struct c2_inquiry { | |
| u8 peripheral_info; | |
| u8 page_code; /* 0xC2 */ | |
| u8 reserved1; | |
| u8 page_len; | |
| u8 page_id[4]; /* "swr4" */ | |
| u8 sw_version[3]; | |
| u8 sw_date[3]; | |
| u8 features_enabled; | |
| u8 max_lun_supported; | |
| u8 partitions[239]; /* Total allocation length should be 0xFF */ | |
| }; | |
| struct rdac_dh_data { | |
| struct list_head node; | |
| struct rdac_controller *ctlr; | |
| struct scsi_device *sdev; | |
| #define UNINITIALIZED_LUN (1 << 8) | |
| unsigned lun; | |
| #define RDAC_MODE 0 | |
| #define RDAC_MODE_AVT 1 | |
| #define RDAC_MODE_IOSHIP 2 | |
| unsigned char mode; | |
| #define RDAC_STATE_ACTIVE 0 | |
| #define RDAC_STATE_PASSIVE 1 | |
| unsigned char state; | |
| #define RDAC_LUN_UNOWNED 0 | |
| #define RDAC_LUN_OWNED 1 | |
| char lun_state; | |
| #define RDAC_PREFERRED 0 | |
| #define RDAC_NON_PREFERRED 1 | |
| char preferred; | |
| unsigned char sense[SCSI_SENSE_BUFFERSIZE]; | |
| union { | |
| struct c2_inquiry c2; | |
| struct c4_inquiry c4; | |
| struct c8_inquiry c8; | |
| struct c9_inquiry c9; | |
| } inq; | |
| }; | |
| static const char *mode[] = { | |
| "RDAC", | |
| "AVT", | |
| "IOSHIP", | |
| }; | |
| static const char *lun_state[] = | |
| { | |
| "unowned", | |
| "owned", | |
| }; | |
| struct rdac_queue_data { | |
| struct list_head entry; | |
| struct rdac_dh_data *h; | |
| activate_complete callback_fn; | |
| void *callback_data; | |
| }; | |
| static LIST_HEAD(ctlr_list); | |
| static DEFINE_SPINLOCK(list_lock); | |
| static struct workqueue_struct *kmpath_rdacd; | |
| static void send_mode_select(struct work_struct *work); | |
| /* | |
| * module parameter to enable rdac debug logging. | |
| * 2 bits for each type of logging, only two types defined for now | |
| * Can be enhanced if required at later point | |
| */ | |
| static int rdac_logging = 1; | |
| module_param(rdac_logging, int, S_IRUGO|S_IWUSR); | |
| MODULE_PARM_DESC(rdac_logging, "A bit mask of rdac logging levels, " | |
| "Default is 1 - failover logging enabled, " | |
| "set it to 0xF to enable all the logs"); | |
| #define RDAC_LOG_FAILOVER 0 | |
| #define RDAC_LOG_SENSE 2 | |
| #define RDAC_LOG_BITS 2 | |
| #define RDAC_LOG_LEVEL(SHIFT) \ | |
| ((rdac_logging >> (SHIFT)) & ((1 << (RDAC_LOG_BITS)) - 1)) | |
| #define RDAC_LOG(SHIFT, sdev, f, arg...) \ | |
| do { \ | |
| if (unlikely(RDAC_LOG_LEVEL(SHIFT))) \ | |
| sdev_printk(KERN_INFO, sdev, RDAC_NAME ": " f "\n", ## arg); \ | |
| } while (0); | |
| static struct request *get_rdac_req(struct scsi_device *sdev, | |
| void *buffer, unsigned buflen, int rw) | |
| { | |
| struct request *rq; | |
| struct request_queue *q = sdev->request_queue; | |
| rq = blk_get_request(q, rw, GFP_NOIO); | |
| if (IS_ERR(rq)) { | |
| sdev_printk(KERN_INFO, sdev, | |
| "get_rdac_req: blk_get_request failed.\n"); | |
| return NULL; | |
| } | |
| blk_rq_set_block_pc(rq); | |
| if (buflen && blk_rq_map_kern(q, rq, buffer, buflen, GFP_NOIO)) { | |
| blk_put_request(rq); | |
| sdev_printk(KERN_INFO, sdev, | |
| "get_rdac_req: blk_rq_map_kern failed.\n"); | |
| return NULL; | |
| } | |
| rq->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | | |
| REQ_FAILFAST_DRIVER; | |
| rq->retries = RDAC_RETRIES; | |
| rq->timeout = RDAC_TIMEOUT; | |
| return rq; | |
| } | |
| static struct request *rdac_failover_get(struct scsi_device *sdev, | |
| struct rdac_dh_data *h, struct list_head *list) | |
| { | |
| struct request *rq; | |
| struct rdac_mode_common *common; | |
| unsigned data_size; | |
| struct rdac_queue_data *qdata; | |
| u8 *lun_table; | |
| if (h->ctlr->use_ms10) { | |
| struct rdac_pg_expanded *rdac_pg; | |
| data_size = sizeof(struct rdac_pg_expanded); | |
| rdac_pg = &h->ctlr->mode_select.expanded; | |
| memset(rdac_pg, 0, data_size); | |
| common = &rdac_pg->common; | |
| rdac_pg->page_code = RDAC_PAGE_CODE_REDUNDANT_CONTROLLER + 0x40; | |
| rdac_pg->subpage_code = 0x1; | |
| rdac_pg->page_len[0] = 0x01; | |
| rdac_pg->page_len[1] = 0x28; | |
| lun_table = rdac_pg->lun_table; | |
| } else { | |
| struct rdac_pg_legacy *rdac_pg; | |
| data_size = sizeof(struct rdac_pg_legacy); | |
| rdac_pg = &h->ctlr->mode_select.legacy; | |
| memset(rdac_pg, 0, data_size); | |
| common = &rdac_pg->common; | |
| rdac_pg->page_code = RDAC_PAGE_CODE_REDUNDANT_CONTROLLER; | |
| rdac_pg->page_len = 0x68; | |
| lun_table = rdac_pg->lun_table; | |
| } | |
| common->rdac_mode[1] = RDAC_MODE_TRANSFER_SPECIFIED_LUNS; | |
| common->quiescence_timeout = RDAC_QUIESCENCE_TIME; | |
| common->rdac_options = RDAC_FORCED_QUIESENCE; | |
| list_for_each_entry(qdata, list, entry) { | |
| lun_table[qdata->h->lun] = 0x81; | |
| } | |
| /* get request for block layer packet command */ | |
| rq = get_rdac_req(sdev, &h->ctlr->mode_select, data_size, WRITE); | |
| if (!rq) | |
| return NULL; | |
| /* Prepare the command. */ | |
| if (h->ctlr->use_ms10) { | |
| rq->cmd[0] = MODE_SELECT_10; | |
| rq->cmd[7] = data_size >> 8; | |
| rq->cmd[8] = data_size & 0xff; | |
| } else { | |
| rq->cmd[0] = MODE_SELECT; | |
| rq->cmd[4] = data_size; | |
| } | |
| rq->cmd_len = COMMAND_SIZE(rq->cmd[0]); | |
| rq->sense = h->sense; | |
| memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE); | |
| rq->sense_len = 0; | |
| return rq; | |
| } | |
| static void release_controller(struct kref *kref) | |
| { | |
| struct rdac_controller *ctlr; | |
| ctlr = container_of(kref, struct rdac_controller, kref); | |
| list_del(&ctlr->node); | |
| kfree(ctlr); | |
| } | |
| static struct rdac_controller *get_controller(int index, char *array_name, | |
| u8 *array_id, struct scsi_device *sdev) | |
| { | |
| struct rdac_controller *ctlr, *tmp; | |
| list_for_each_entry(tmp, &ctlr_list, node) { | |
| if ((memcmp(tmp->array_id, array_id, UNIQUE_ID_LEN) == 0) && | |
| (tmp->index == index) && | |
| (tmp->host == sdev->host)) { | |
| kref_get(&tmp->kref); | |
| return tmp; | |
| } | |
| } | |
| ctlr = kmalloc(sizeof(*ctlr), GFP_ATOMIC); | |
| if (!ctlr) | |
| return NULL; | |
| /* initialize fields of controller */ | |
| memcpy(ctlr->array_id, array_id, UNIQUE_ID_LEN); | |
| ctlr->index = index; | |
| ctlr->host = sdev->host; | |
| memcpy(ctlr->array_name, array_name, ARRAY_LABEL_LEN); | |
| kref_init(&ctlr->kref); | |
| ctlr->use_ms10 = -1; | |
| ctlr->ms_queued = 0; | |
| ctlr->ms_sdev = NULL; | |
| spin_lock_init(&ctlr->ms_lock); | |
| INIT_WORK(&ctlr->ms_work, send_mode_select); | |
| INIT_LIST_HEAD(&ctlr->ms_head); | |
| list_add(&ctlr->node, &ctlr_list); | |
| INIT_LIST_HEAD(&ctlr->dh_list); | |
| return ctlr; | |
| } | |
| static int submit_inquiry(struct scsi_device *sdev, int page_code, | |
| unsigned int len, struct rdac_dh_data *h) | |
| { | |
| struct request *rq; | |
| struct request_queue *q = sdev->request_queue; | |
| int err = SCSI_DH_RES_TEMP_UNAVAIL; | |
| rq = get_rdac_req(sdev, &h->inq, len, READ); | |
| if (!rq) | |
| goto done; | |
| /* Prepare the command. */ | |
| rq->cmd[0] = INQUIRY; | |
| rq->cmd[1] = 1; | |
| rq->cmd[2] = page_code; | |
| rq->cmd[4] = len; | |
| rq->cmd_len = COMMAND_SIZE(INQUIRY); | |
| rq->sense = h->sense; | |
| memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE); | |
| rq->sense_len = 0; | |
| err = blk_execute_rq(q, NULL, rq, 1); | |
| if (err == -EIO) | |
| err = SCSI_DH_IO; | |
| blk_put_request(rq); | |
| done: | |
| return err; | |
| } | |
| static int get_lun_info(struct scsi_device *sdev, struct rdac_dh_data *h, | |
| char *array_name, u8 *array_id) | |
| { | |
| int err, i; | |
| struct c8_inquiry *inqp; | |
| err = submit_inquiry(sdev, 0xC8, sizeof(struct c8_inquiry), h); | |
| if (err == SCSI_DH_OK) { | |
| inqp = &h->inq.c8; | |
| if (inqp->page_code != 0xc8) | |
| return SCSI_DH_NOSYS; | |
| if (inqp->page_id[0] != 'e' || inqp->page_id[1] != 'd' || | |
| inqp->page_id[2] != 'i' || inqp->page_id[3] != 'd') | |
| return SCSI_DH_NOSYS; | |
| h->lun = inqp->lun[7]; /* Uses only the last byte */ | |
| for(i=0; i<ARRAY_LABEL_LEN-1; ++i) | |
| *(array_name+i) = inqp->array_user_label[(2*i)+1]; | |
| *(array_name+ARRAY_LABEL_LEN-1) = '\0'; | |
| memset(array_id, 0, UNIQUE_ID_LEN); | |
| memcpy(array_id, inqp->array_unique_id, inqp->array_uniq_id_len); | |
| } | |
| return err; | |
| } | |
| static int check_ownership(struct scsi_device *sdev, struct rdac_dh_data *h) | |
| { | |
| int err, access_state; | |
| struct rdac_dh_data *tmp; | |
| struct c9_inquiry *inqp; | |
| h->state = RDAC_STATE_ACTIVE; | |
| err = submit_inquiry(sdev, 0xC9, sizeof(struct c9_inquiry), h); | |
| if (err == SCSI_DH_OK) { | |
| inqp = &h->inq.c9; | |
| /* detect the operating mode */ | |
| if ((inqp->avte_cvp >> 5) & 0x1) | |
| h->mode = RDAC_MODE_IOSHIP; /* LUN in IOSHIP mode */ | |
| else if (inqp->avte_cvp >> 7) | |
| h->mode = RDAC_MODE_AVT; /* LUN in AVT mode */ | |
| else | |
| h->mode = RDAC_MODE; /* LUN in RDAC mode */ | |
| /* Update ownership */ | |
| if (inqp->avte_cvp & 0x1) { | |
| h->lun_state = RDAC_LUN_OWNED; | |
| access_state = SCSI_ACCESS_STATE_OPTIMAL; | |
| } else { | |
| h->lun_state = RDAC_LUN_UNOWNED; | |
| if (h->mode == RDAC_MODE) { | |
| h->state = RDAC_STATE_PASSIVE; | |
| access_state = SCSI_ACCESS_STATE_STANDBY; | |
| } else | |
| access_state = SCSI_ACCESS_STATE_ACTIVE; | |
| } | |
| /* Update path prio*/ | |
| if (inqp->path_prio & 0x1) { | |
| h->preferred = RDAC_PREFERRED; | |
| access_state |= SCSI_ACCESS_STATE_PREFERRED; | |
| } else | |
| h->preferred = RDAC_NON_PREFERRED; | |
| rcu_read_lock(); | |
| list_for_each_entry_rcu(tmp, &h->ctlr->dh_list, node) { | |
| /* h->sdev should always be valid */ | |
| BUG_ON(!tmp->sdev); | |
| tmp->sdev->access_state = access_state; | |
| } | |
| rcu_read_unlock(); | |
| } | |
| return err; | |
| } | |
| static int initialize_controller(struct scsi_device *sdev, | |
| struct rdac_dh_data *h, char *array_name, u8 *array_id) | |
| { | |
| int err, index; | |
| struct c4_inquiry *inqp; | |
| err = submit_inquiry(sdev, 0xC4, sizeof(struct c4_inquiry), h); | |
| if (err == SCSI_DH_OK) { | |
| inqp = &h->inq.c4; | |
| /* get the controller index */ | |
| if (inqp->slot_id[1] == 0x31) | |
| index = 0; | |
| else | |
| index = 1; | |
| spin_lock(&list_lock); | |
| h->ctlr = get_controller(index, array_name, array_id, sdev); | |
| if (!h->ctlr) | |
| err = SCSI_DH_RES_TEMP_UNAVAIL; | |
| else { | |
| list_add_rcu(&h->node, &h->ctlr->dh_list); | |
| h->sdev = sdev; | |
| } | |
| spin_unlock(&list_lock); | |
| } | |
| return err; | |
| } | |
| static int set_mode_select(struct scsi_device *sdev, struct rdac_dh_data *h) | |
| { | |
| int err; | |
| struct c2_inquiry *inqp; | |
| err = submit_inquiry(sdev, 0xC2, sizeof(struct c2_inquiry), h); | |
| if (err == SCSI_DH_OK) { | |
| inqp = &h->inq.c2; | |
| /* | |
| * If more than MODE6_MAX_LUN luns are supported, use | |
| * mode select 10 | |
| */ | |
| if (inqp->max_lun_supported >= MODE6_MAX_LUN) | |
| h->ctlr->use_ms10 = 1; | |
| else | |
| h->ctlr->use_ms10 = 0; | |
| } | |
| return err; | |
| } | |
| static int mode_select_handle_sense(struct scsi_device *sdev, | |
| unsigned char *sensebuf) | |
| { | |
| struct scsi_sense_hdr sense_hdr; | |
| int err = SCSI_DH_IO, ret; | |
| struct rdac_dh_data *h = sdev->handler_data; | |
| ret = scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE, &sense_hdr); | |
| if (!ret) | |
| goto done; | |
| switch (sense_hdr.sense_key) { | |
| case NO_SENSE: | |
| case ABORTED_COMMAND: | |
| case UNIT_ATTENTION: | |
| err = SCSI_DH_RETRY; | |
| break; | |
| case NOT_READY: | |
| if (sense_hdr.asc == 0x04 && sense_hdr.ascq == 0x01) | |
| /* LUN Not Ready and is in the Process of Becoming | |
| * Ready | |
| */ | |
| err = SCSI_DH_RETRY; | |
| break; | |
| case ILLEGAL_REQUEST: | |
| if (sense_hdr.asc == 0x91 && sense_hdr.ascq == 0x36) | |
| /* | |
| * Command Lock contention | |
| */ | |
| err = SCSI_DH_IMM_RETRY; | |
| break; | |
| default: | |
| break; | |
| } | |
| RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, " | |
| "MODE_SELECT returned with sense %02x/%02x/%02x", | |
| (char *) h->ctlr->array_name, h->ctlr->index, | |
| sense_hdr.sense_key, sense_hdr.asc, sense_hdr.ascq); | |
| done: | |
| return err; | |
| } | |
| static void send_mode_select(struct work_struct *work) | |
| { | |
| struct rdac_controller *ctlr = | |
| container_of(work, struct rdac_controller, ms_work); | |
| struct request *rq; | |
| struct scsi_device *sdev = ctlr->ms_sdev; | |
| struct rdac_dh_data *h = sdev->handler_data; | |
| struct request_queue *q = sdev->request_queue; | |
| int err, retry_cnt = RDAC_RETRY_COUNT; | |
| struct rdac_queue_data *tmp, *qdata; | |
| LIST_HEAD(list); | |
| spin_lock(&ctlr->ms_lock); | |
| list_splice_init(&ctlr->ms_head, &list); | |
| ctlr->ms_queued = 0; | |
| ctlr->ms_sdev = NULL; | |
| spin_unlock(&ctlr->ms_lock); | |
| retry: | |
| err = SCSI_DH_RES_TEMP_UNAVAIL; | |
| rq = rdac_failover_get(sdev, h, &list); | |
| if (!rq) | |
| goto done; | |
| RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, " | |
| "%s MODE_SELECT command", | |
| (char *) h->ctlr->array_name, h->ctlr->index, | |
| (retry_cnt == RDAC_RETRY_COUNT) ? "queueing" : "retrying"); | |
| err = blk_execute_rq(q, NULL, rq, 1); | |
| blk_put_request(rq); | |
| if (err != SCSI_DH_OK) { | |
| err = mode_select_handle_sense(sdev, h->sense); | |
| if (err == SCSI_DH_RETRY && retry_cnt--) | |
| goto retry; | |
| if (err == SCSI_DH_IMM_RETRY) | |
| goto retry; | |
| } | |
| if (err == SCSI_DH_OK) { | |
| h->state = RDAC_STATE_ACTIVE; | |
| RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, " | |
| "MODE_SELECT completed", | |
| (char *) h->ctlr->array_name, h->ctlr->index); | |
| } | |
| done: | |
| list_for_each_entry_safe(qdata, tmp, &list, entry) { | |
| list_del(&qdata->entry); | |
| if (err == SCSI_DH_OK) | |
| qdata->h->state = RDAC_STATE_ACTIVE; | |
| if (qdata->callback_fn) | |
| qdata->callback_fn(qdata->callback_data, err); | |
| kfree(qdata); | |
| } | |
| return; | |
| } | |
| static int queue_mode_select(struct scsi_device *sdev, | |
| activate_complete fn, void *data) | |
| { | |
| struct rdac_queue_data *qdata; | |
| struct rdac_controller *ctlr; | |
| qdata = kzalloc(sizeof(*qdata), GFP_KERNEL); | |
| if (!qdata) | |
| return SCSI_DH_RETRY; | |
| qdata->h = sdev->handler_data; | |
| qdata->callback_fn = fn; | |
| qdata->callback_data = data; | |
| ctlr = qdata->h->ctlr; | |
| spin_lock(&ctlr->ms_lock); | |
| list_add_tail(&qdata->entry, &ctlr->ms_head); | |
| if (!ctlr->ms_queued) { | |
| ctlr->ms_queued = 1; | |
| ctlr->ms_sdev = sdev; | |
| queue_work(kmpath_rdacd, &ctlr->ms_work); | |
| } | |
| spin_unlock(&ctlr->ms_lock); | |
| return SCSI_DH_OK; | |
| } | |
| static int rdac_activate(struct scsi_device *sdev, | |
| activate_complete fn, void *data) | |
| { | |
| struct rdac_dh_data *h = sdev->handler_data; | |
| int err = SCSI_DH_OK; | |
| int act = 0; | |
| err = check_ownership(sdev, h); | |
| if (err != SCSI_DH_OK) | |
| goto done; | |
| switch (h->mode) { | |
| case RDAC_MODE: | |
| if (h->lun_state == RDAC_LUN_UNOWNED) | |
| act = 1; | |
| break; | |
| case RDAC_MODE_IOSHIP: | |
| if ((h->lun_state == RDAC_LUN_UNOWNED) && | |
| (h->preferred == RDAC_PREFERRED)) | |
| act = 1; | |
| break; | |
| default: | |
| break; | |
| } | |
| if (act) { | |
| err = queue_mode_select(sdev, fn, data); | |
| if (err == SCSI_DH_OK) | |
| return 0; | |
| } | |
| done: | |
| if (fn) | |
| fn(data, err); | |
| return 0; | |
| } | |
| static int rdac_prep_fn(struct scsi_device *sdev, struct request *req) | |
| { | |
| struct rdac_dh_data *h = sdev->handler_data; | |
| int ret = BLKPREP_OK; | |
| if (h->state != RDAC_STATE_ACTIVE) { | |
| ret = BLKPREP_KILL; | |
| req->cmd_flags |= REQ_QUIET; | |
| } | |
| return ret; | |
| } | |
| static int rdac_check_sense(struct scsi_device *sdev, | |
| struct scsi_sense_hdr *sense_hdr) | |
| { | |
| struct rdac_dh_data *h = sdev->handler_data; | |
| RDAC_LOG(RDAC_LOG_SENSE, sdev, "array %s, ctlr %d, " | |
| "I/O returned with sense %02x/%02x/%02x", | |
| (char *) h->ctlr->array_name, h->ctlr->index, | |
| sense_hdr->sense_key, sense_hdr->asc, sense_hdr->ascq); | |
| switch (sense_hdr->sense_key) { | |
| case NOT_READY: | |
| if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x01) | |
| /* LUN Not Ready - Logical Unit Not Ready and is in | |
| * the process of becoming ready | |
| * Just retry. | |
| */ | |
| return ADD_TO_MLQUEUE; | |
| if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x81) | |
| /* LUN Not Ready - Storage firmware incompatible | |
| * Manual code synchonisation required. | |
| * | |
| * Nothing we can do here. Try to bypass the path. | |
| */ | |
| return SUCCESS; | |
| if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0xA1) | |
| /* LUN Not Ready - Quiescense in progress | |
| * | |
| * Just retry and wait. | |
| */ | |
| return ADD_TO_MLQUEUE; | |
| if (sense_hdr->asc == 0xA1 && sense_hdr->ascq == 0x02) | |
| /* LUN Not Ready - Quiescense in progress | |
| * or has been achieved | |
| * Just retry. | |
| */ | |
| return ADD_TO_MLQUEUE; | |
| break; | |
| case ILLEGAL_REQUEST: | |
| if (sense_hdr->asc == 0x94 && sense_hdr->ascq == 0x01) { | |
| /* Invalid Request - Current Logical Unit Ownership. | |
| * Controller is not the current owner of the LUN, | |
| * Fail the path, so that the other path be used. | |
| */ | |
| h->state = RDAC_STATE_PASSIVE; | |
| return SUCCESS; | |
| } | |
| break; | |
| case UNIT_ATTENTION: | |
| if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00) | |
| /* | |
| * Power On, Reset, or Bus Device Reset, just retry. | |
| */ | |
| return ADD_TO_MLQUEUE; | |
| if (sense_hdr->asc == 0x8b && sense_hdr->ascq == 0x02) | |
| /* | |
| * Quiescence in progress , just retry. | |
| */ | |
| return ADD_TO_MLQUEUE; | |
| break; | |
| } | |
| /* success just means we do not care what scsi-ml does */ | |
| return SCSI_RETURN_NOT_HANDLED; | |
| } | |
| static int rdac_bus_attach(struct scsi_device *sdev) | |
| { | |
| struct rdac_dh_data *h; | |
| int err; | |
| char array_name[ARRAY_LABEL_LEN]; | |
| char array_id[UNIQUE_ID_LEN]; | |
| h = kzalloc(sizeof(*h) , GFP_KERNEL); | |
| if (!h) | |
| return -ENOMEM; | |
| h->lun = UNINITIALIZED_LUN; | |
| h->state = RDAC_STATE_ACTIVE; | |
| err = get_lun_info(sdev, h, array_name, array_id); | |
| if (err != SCSI_DH_OK) | |
| goto failed; | |
| err = initialize_controller(sdev, h, array_name, array_id); | |
| if (err != SCSI_DH_OK) | |
| goto failed; | |
| err = check_ownership(sdev, h); | |
| if (err != SCSI_DH_OK) | |
| goto clean_ctlr; | |
| err = set_mode_select(sdev, h); | |
| if (err != SCSI_DH_OK) | |
| goto clean_ctlr; | |
| sdev_printk(KERN_NOTICE, sdev, | |
| "%s: LUN %d (%s) (%s)\n", | |
| RDAC_NAME, h->lun, mode[(int)h->mode], | |
| lun_state[(int)h->lun_state]); | |
| sdev->handler_data = h; | |
| return 0; | |
| clean_ctlr: | |
| spin_lock(&list_lock); | |
| kref_put(&h->ctlr->kref, release_controller); | |
| spin_unlock(&list_lock); | |
| failed: | |
| kfree(h); | |
| return -EINVAL; | |
| } | |
| static void rdac_bus_detach( struct scsi_device *sdev ) | |
| { | |
| struct rdac_dh_data *h = sdev->handler_data; | |
| if (h->ctlr && h->ctlr->ms_queued) | |
| flush_workqueue(kmpath_rdacd); | |
| spin_lock(&list_lock); | |
| if (h->ctlr) { | |
| list_del_rcu(&h->node); | |
| h->sdev = NULL; | |
| kref_put(&h->ctlr->kref, release_controller); | |
| } | |
| spin_unlock(&list_lock); | |
| sdev->handler_data = NULL; | |
| kfree(h); | |
| } | |
| static struct scsi_device_handler rdac_dh = { | |
| .name = RDAC_NAME, | |
| .module = THIS_MODULE, | |
| .prep_fn = rdac_prep_fn, | |
| .check_sense = rdac_check_sense, | |
| .attach = rdac_bus_attach, | |
| .detach = rdac_bus_detach, | |
| .activate = rdac_activate, | |
| }; | |
| static int __init rdac_init(void) | |
| { | |
| int r; | |
| r = scsi_register_device_handler(&rdac_dh); | |
| if (r != 0) { | |
| printk(KERN_ERR "Failed to register scsi device handler."); | |
| goto done; | |
| } | |
| /* | |
| * Create workqueue to handle mode selects for rdac | |
| */ | |
| kmpath_rdacd = create_singlethread_workqueue("kmpath_rdacd"); | |
| if (!kmpath_rdacd) { | |
| scsi_unregister_device_handler(&rdac_dh); | |
| printk(KERN_ERR "kmpath_rdacd creation failed.\n"); | |
| r = -EINVAL; | |
| } | |
| done: | |
| return r; | |
| } | |
| static void __exit rdac_exit(void) | |
| { | |
| destroy_workqueue(kmpath_rdacd); | |
| scsi_unregister_device_handler(&rdac_dh); | |
| } | |
| module_init(rdac_init); | |
| module_exit(rdac_exit); | |
| MODULE_DESCRIPTION("Multipath LSI/Engenio/NetApp E-Series RDAC driver"); | |
| MODULE_AUTHOR("Mike Christie, Chandra Seetharaman"); | |
| MODULE_VERSION("01.00.0000.0000"); | |
| MODULE_LICENSE("GPL"); |