| /* | |
| * Serial Attached SCSI (SAS) class SCSI Host glue. | |
| * | |
| * Copyright (C) 2005 Adaptec, Inc. All rights reserved. | |
| * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> | |
| * | |
| * This file is licensed under GPLv2. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of the | |
| * License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 | |
| * USA | |
| * | |
| */ | |
| #include <linux/kthread.h> | |
| #include <linux/firmware.h> | |
| #include <linux/export.h> | |
| #include <linux/ctype.h> | |
| #include "sas_internal.h" | |
| #include <scsi/scsi_host.h> | |
| #include <scsi/scsi_device.h> | |
| #include <scsi/scsi_tcq.h> | |
| #include <scsi/scsi.h> | |
| #include <scsi/scsi_eh.h> | |
| #include <scsi/scsi_transport.h> | |
| #include <scsi/scsi_transport_sas.h> | |
| #include <scsi/sas_ata.h> | |
| #include "../scsi_sas_internal.h" | |
| #include "../scsi_transport_api.h" | |
| #include "../scsi_priv.h" | |
| #include <linux/err.h> | |
| #include <linux/blkdev.h> | |
| #include <linux/freezer.h> | |
| #include <linux/gfp.h> | |
| #include <linux/scatterlist.h> | |
| #include <linux/libata.h> | |
| /* record final status and free the task */ | |
| static void sas_end_task(struct scsi_cmnd *sc, struct sas_task *task) | |
| { | |
| struct task_status_struct *ts = &task->task_status; | |
| int hs = 0, stat = 0; | |
| if (ts->resp == SAS_TASK_UNDELIVERED) { | |
| /* transport error */ | |
| hs = DID_NO_CONNECT; | |
| } else { /* ts->resp == SAS_TASK_COMPLETE */ | |
| /* task delivered, what happened afterwards? */ | |
| switch (ts->stat) { | |
| case SAS_DEV_NO_RESPONSE: | |
| case SAS_INTERRUPTED: | |
| case SAS_PHY_DOWN: | |
| case SAS_NAK_R_ERR: | |
| case SAS_OPEN_TO: | |
| hs = DID_NO_CONNECT; | |
| break; | |
| case SAS_DATA_UNDERRUN: | |
| scsi_set_resid(sc, ts->residual); | |
| if (scsi_bufflen(sc) - scsi_get_resid(sc) < sc->underflow) | |
| hs = DID_ERROR; | |
| break; | |
| case SAS_DATA_OVERRUN: | |
| hs = DID_ERROR; | |
| break; | |
| case SAS_QUEUE_FULL: | |
| hs = DID_SOFT_ERROR; /* retry */ | |
| break; | |
| case SAS_DEVICE_UNKNOWN: | |
| hs = DID_BAD_TARGET; | |
| break; | |
| case SAS_SG_ERR: | |
| hs = DID_PARITY; | |
| break; | |
| case SAS_OPEN_REJECT: | |
| if (ts->open_rej_reason == SAS_OREJ_RSVD_RETRY) | |
| hs = DID_SOFT_ERROR; /* retry */ | |
| else | |
| hs = DID_ERROR; | |
| break; | |
| case SAS_PROTO_RESPONSE: | |
| SAS_DPRINTK("LLDD:%s sent SAS_PROTO_RESP for an SSP " | |
| "task; please report this\n", | |
| task->dev->port->ha->sas_ha_name); | |
| break; | |
| case SAS_ABORTED_TASK: | |
| hs = DID_ABORT; | |
| break; | |
| case SAM_STAT_CHECK_CONDITION: | |
| memcpy(sc->sense_buffer, ts->buf, | |
| min(SCSI_SENSE_BUFFERSIZE, ts->buf_valid_size)); | |
| stat = SAM_STAT_CHECK_CONDITION; | |
| break; | |
| default: | |
| stat = ts->stat; | |
| break; | |
| } | |
| } | |
| sc->result = (hs << 16) | stat; | |
| ASSIGN_SAS_TASK(sc, NULL); | |
| sas_free_task(task); | |
| } | |
| static void sas_scsi_task_done(struct sas_task *task) | |
| { | |
| struct scsi_cmnd *sc = task->uldd_task; | |
| struct domain_device *dev = task->dev; | |
| struct sas_ha_struct *ha = dev->port->ha; | |
| unsigned long flags; | |
| spin_lock_irqsave(&dev->done_lock, flags); | |
| if (test_bit(SAS_HA_FROZEN, &ha->state)) | |
| task = NULL; | |
| else | |
| ASSIGN_SAS_TASK(sc, NULL); | |
| spin_unlock_irqrestore(&dev->done_lock, flags); | |
| if (unlikely(!task)) { | |
| /* task will be completed by the error handler */ | |
| SAS_DPRINTK("task done but aborted\n"); | |
| return; | |
| } | |
| if (unlikely(!sc)) { | |
| SAS_DPRINTK("task_done called with non existing SCSI cmnd!\n"); | |
| sas_free_task(task); | |
| return; | |
| } | |
| sas_end_task(sc, task); | |
| sc->scsi_done(sc); | |
| } | |
| static struct sas_task *sas_create_task(struct scsi_cmnd *cmd, | |
| struct domain_device *dev, | |
| gfp_t gfp_flags) | |
| { | |
| struct sas_task *task = sas_alloc_task(gfp_flags); | |
| struct scsi_lun lun; | |
| if (!task) | |
| return NULL; | |
| task->uldd_task = cmd; | |
| ASSIGN_SAS_TASK(cmd, task); | |
| task->dev = dev; | |
| task->task_proto = task->dev->tproto; /* BUG_ON(!SSP) */ | |
| task->ssp_task.retry_count = 1; | |
| int_to_scsilun(cmd->device->lun, &lun); | |
| memcpy(task->ssp_task.LUN, &lun.scsi_lun, 8); | |
| task->ssp_task.task_attr = TASK_ATTR_SIMPLE; | |
| task->ssp_task.cmd = cmd; | |
| task->scatter = scsi_sglist(cmd); | |
| task->num_scatter = scsi_sg_count(cmd); | |
| task->total_xfer_len = scsi_bufflen(cmd); | |
| task->data_dir = cmd->sc_data_direction; | |
| task->task_done = sas_scsi_task_done; | |
| return task; | |
| } | |
| int sas_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd) | |
| { | |
| struct sas_internal *i = to_sas_internal(host->transportt); | |
| struct domain_device *dev = cmd_to_domain_dev(cmd); | |
| struct sas_task *task; | |
| int res = 0; | |
| /* If the device fell off, no sense in issuing commands */ | |
| if (test_bit(SAS_DEV_GONE, &dev->state)) { | |
| cmd->result = DID_BAD_TARGET << 16; | |
| goto out_done; | |
| } | |
| if (dev_is_sata(dev)) { | |
| spin_lock_irq(dev->sata_dev.ap->lock); | |
| res = ata_sas_queuecmd(cmd, dev->sata_dev.ap); | |
| spin_unlock_irq(dev->sata_dev.ap->lock); | |
| return res; | |
| } | |
| task = sas_create_task(cmd, dev, GFP_ATOMIC); | |
| if (!task) | |
| return SCSI_MLQUEUE_HOST_BUSY; | |
| res = i->dft->lldd_execute_task(task, GFP_ATOMIC); | |
| if (res) | |
| goto out_free_task; | |
| return 0; | |
| out_free_task: | |
| SAS_DPRINTK("lldd_execute_task returned: %d\n", res); | |
| ASSIGN_SAS_TASK(cmd, NULL); | |
| sas_free_task(task); | |
| if (res == -SAS_QUEUE_FULL) | |
| cmd->result = DID_SOFT_ERROR << 16; /* retry */ | |
| else | |
| cmd->result = DID_ERROR << 16; | |
| out_done: | |
| cmd->scsi_done(cmd); | |
| return 0; | |
| } | |
| static void sas_eh_finish_cmd(struct scsi_cmnd *cmd) | |
| { | |
| struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(cmd->device->host); | |
| struct sas_task *task = TO_SAS_TASK(cmd); | |
| /* At this point, we only get called following an actual abort | |
| * of the task, so we should be guaranteed not to be racing with | |
| * any completions from the LLD. Task is freed after this. | |
| */ | |
| sas_end_task(cmd, task); | |
| /* now finish the command and move it on to the error | |
| * handler done list, this also takes it off the | |
| * error handler pending list. | |
| */ | |
| scsi_eh_finish_cmd(cmd, &sas_ha->eh_done_q); | |
| } | |
| static void sas_eh_defer_cmd(struct scsi_cmnd *cmd) | |
| { | |
| struct domain_device *dev = cmd_to_domain_dev(cmd); | |
| struct sas_ha_struct *ha = dev->port->ha; | |
| struct sas_task *task = TO_SAS_TASK(cmd); | |
| if (!dev_is_sata(dev)) { | |
| sas_eh_finish_cmd(cmd); | |
| return; | |
| } | |
| /* report the timeout to libata */ | |
| sas_end_task(cmd, task); | |
| list_move_tail(&cmd->eh_entry, &ha->eh_ata_q); | |
| } | |
| static void sas_scsi_clear_queue_lu(struct list_head *error_q, struct scsi_cmnd *my_cmd) | |
| { | |
| struct scsi_cmnd *cmd, *n; | |
| list_for_each_entry_safe(cmd, n, error_q, eh_entry) { | |
| if (cmd->device->sdev_target == my_cmd->device->sdev_target && | |
| cmd->device->lun == my_cmd->device->lun) | |
| sas_eh_defer_cmd(cmd); | |
| } | |
| } | |
| static void sas_scsi_clear_queue_I_T(struct list_head *error_q, | |
| struct domain_device *dev) | |
| { | |
| struct scsi_cmnd *cmd, *n; | |
| list_for_each_entry_safe(cmd, n, error_q, eh_entry) { | |
| struct domain_device *x = cmd_to_domain_dev(cmd); | |
| if (x == dev) | |
| sas_eh_finish_cmd(cmd); | |
| } | |
| } | |
| static void sas_scsi_clear_queue_port(struct list_head *error_q, | |
| struct asd_sas_port *port) | |
| { | |
| struct scsi_cmnd *cmd, *n; | |
| list_for_each_entry_safe(cmd, n, error_q, eh_entry) { | |
| struct domain_device *dev = cmd_to_domain_dev(cmd); | |
| struct asd_sas_port *x = dev->port; | |
| if (x == port) | |
| sas_eh_finish_cmd(cmd); | |
| } | |
| } | |
| enum task_disposition { | |
| TASK_IS_DONE, | |
| TASK_IS_ABORTED, | |
| TASK_IS_AT_LU, | |
| TASK_IS_NOT_AT_LU, | |
| TASK_ABORT_FAILED, | |
| }; | |
| static enum task_disposition sas_scsi_find_task(struct sas_task *task) | |
| { | |
| unsigned long flags; | |
| int i, res; | |
| struct sas_internal *si = | |
| to_sas_internal(task->dev->port->ha->core.shost->transportt); | |
| for (i = 0; i < 5; i++) { | |
| SAS_DPRINTK("%s: aborting task 0x%p\n", __func__, task); | |
| res = si->dft->lldd_abort_task(task); | |
| spin_lock_irqsave(&task->task_state_lock, flags); | |
| if (task->task_state_flags & SAS_TASK_STATE_DONE) { | |
| spin_unlock_irqrestore(&task->task_state_lock, flags); | |
| SAS_DPRINTK("%s: task 0x%p is done\n", __func__, | |
| task); | |
| return TASK_IS_DONE; | |
| } | |
| spin_unlock_irqrestore(&task->task_state_lock, flags); | |
| if (res == TMF_RESP_FUNC_COMPLETE) { | |
| SAS_DPRINTK("%s: task 0x%p is aborted\n", | |
| __func__, task); | |
| return TASK_IS_ABORTED; | |
| } else if (si->dft->lldd_query_task) { | |
| SAS_DPRINTK("%s: querying task 0x%p\n", | |
| __func__, task); | |
| res = si->dft->lldd_query_task(task); | |
| switch (res) { | |
| case TMF_RESP_FUNC_SUCC: | |
| SAS_DPRINTK("%s: task 0x%p at LU\n", | |
| __func__, task); | |
| return TASK_IS_AT_LU; | |
| case TMF_RESP_FUNC_COMPLETE: | |
| SAS_DPRINTK("%s: task 0x%p not at LU\n", | |
| __func__, task); | |
| return TASK_IS_NOT_AT_LU; | |
| case TMF_RESP_FUNC_FAILED: | |
| SAS_DPRINTK("%s: task 0x%p failed to abort\n", | |
| __func__, task); | |
| return TASK_ABORT_FAILED; | |
| } | |
| } | |
| } | |
| return res; | |
| } | |
| static int sas_recover_lu(struct domain_device *dev, struct scsi_cmnd *cmd) | |
| { | |
| int res = TMF_RESP_FUNC_FAILED; | |
| struct scsi_lun lun; | |
| struct sas_internal *i = | |
| to_sas_internal(dev->port->ha->core.shost->transportt); | |
| int_to_scsilun(cmd->device->lun, &lun); | |
| SAS_DPRINTK("eh: device %llx LUN %llx has the task\n", | |
| SAS_ADDR(dev->sas_addr), | |
| cmd->device->lun); | |
| if (i->dft->lldd_abort_task_set) | |
| res = i->dft->lldd_abort_task_set(dev, lun.scsi_lun); | |
| if (res == TMF_RESP_FUNC_FAILED) { | |
| if (i->dft->lldd_clear_task_set) | |
| res = i->dft->lldd_clear_task_set(dev, lun.scsi_lun); | |
| } | |
| if (res == TMF_RESP_FUNC_FAILED) { | |
| if (i->dft->lldd_lu_reset) | |
| res = i->dft->lldd_lu_reset(dev, lun.scsi_lun); | |
| } | |
| return res; | |
| } | |
| static int sas_recover_I_T(struct domain_device *dev) | |
| { | |
| int res = TMF_RESP_FUNC_FAILED; | |
| struct sas_internal *i = | |
| to_sas_internal(dev->port->ha->core.shost->transportt); | |
| SAS_DPRINTK("I_T nexus reset for dev %016llx\n", | |
| SAS_ADDR(dev->sas_addr)); | |
| if (i->dft->lldd_I_T_nexus_reset) | |
| res = i->dft->lldd_I_T_nexus_reset(dev); | |
| return res; | |
| } | |
| /* take a reference on the last known good phy for this device */ | |
| struct sas_phy *sas_get_local_phy(struct domain_device *dev) | |
| { | |
| struct sas_ha_struct *ha = dev->port->ha; | |
| struct sas_phy *phy; | |
| unsigned long flags; | |
| /* a published domain device always has a valid phy, it may be | |
| * stale, but it is never NULL | |
| */ | |
| BUG_ON(!dev->phy); | |
| spin_lock_irqsave(&ha->phy_port_lock, flags); | |
| phy = dev->phy; | |
| get_device(&phy->dev); | |
| spin_unlock_irqrestore(&ha->phy_port_lock, flags); | |
| return phy; | |
| } | |
| EXPORT_SYMBOL_GPL(sas_get_local_phy); | |
| static void sas_wait_eh(struct domain_device *dev) | |
| { | |
| struct sas_ha_struct *ha = dev->port->ha; | |
| DEFINE_WAIT(wait); | |
| if (dev_is_sata(dev)) { | |
| ata_port_wait_eh(dev->sata_dev.ap); | |
| return; | |
| } | |
| retry: | |
| spin_lock_irq(&ha->lock); | |
| while (test_bit(SAS_DEV_EH_PENDING, &dev->state)) { | |
| prepare_to_wait(&ha->eh_wait_q, &wait, TASK_UNINTERRUPTIBLE); | |
| spin_unlock_irq(&ha->lock); | |
| schedule(); | |
| spin_lock_irq(&ha->lock); | |
| } | |
| finish_wait(&ha->eh_wait_q, &wait); | |
| spin_unlock_irq(&ha->lock); | |
| /* make sure SCSI EH is complete */ | |
| if (scsi_host_in_recovery(ha->core.shost)) { | |
| msleep(10); | |
| goto retry; | |
| } | |
| } | |
| EXPORT_SYMBOL(sas_wait_eh); | |
| static int sas_queue_reset(struct domain_device *dev, int reset_type, | |
| u64 lun, int wait) | |
| { | |
| struct sas_ha_struct *ha = dev->port->ha; | |
| int scheduled = 0, tries = 100; | |
| /* ata: promote lun reset to bus reset */ | |
| if (dev_is_sata(dev)) { | |
| sas_ata_schedule_reset(dev); | |
| if (wait) | |
| sas_ata_wait_eh(dev); | |
| return SUCCESS; | |
| } | |
| while (!scheduled && tries--) { | |
| spin_lock_irq(&ha->lock); | |
| if (!test_bit(SAS_DEV_EH_PENDING, &dev->state) && | |
| !test_bit(reset_type, &dev->state)) { | |
| scheduled = 1; | |
| ha->eh_active++; | |
| list_add_tail(&dev->ssp_dev.eh_list_node, &ha->eh_dev_q); | |
| set_bit(SAS_DEV_EH_PENDING, &dev->state); | |
| set_bit(reset_type, &dev->state); | |
| int_to_scsilun(lun, &dev->ssp_dev.reset_lun); | |
| scsi_schedule_eh(ha->core.shost); | |
| } | |
| spin_unlock_irq(&ha->lock); | |
| if (wait) | |
| sas_wait_eh(dev); | |
| if (scheduled) | |
| return SUCCESS; | |
| } | |
| SAS_DPRINTK("%s reset of %s failed\n", | |
| reset_type == SAS_DEV_LU_RESET ? "LUN" : "Bus", | |
| dev_name(&dev->rphy->dev)); | |
| return FAILED; | |
| } | |
| int sas_eh_abort_handler(struct scsi_cmnd *cmd) | |
| { | |
| int res; | |
| struct sas_task *task = TO_SAS_TASK(cmd); | |
| struct Scsi_Host *host = cmd->device->host; | |
| struct sas_internal *i = to_sas_internal(host->transportt); | |
| if (current != host->ehandler) | |
| return FAILED; | |
| if (!i->dft->lldd_abort_task) | |
| return FAILED; | |
| res = i->dft->lldd_abort_task(task); | |
| if (res == TMF_RESP_FUNC_SUCC || res == TMF_RESP_FUNC_COMPLETE) | |
| return SUCCESS; | |
| return FAILED; | |
| } | |
| EXPORT_SYMBOL_GPL(sas_eh_abort_handler); | |
| /* Attempt to send a LUN reset message to a device */ | |
| int sas_eh_device_reset_handler(struct scsi_cmnd *cmd) | |
| { | |
| int res; | |
| struct scsi_lun lun; | |
| struct Scsi_Host *host = cmd->device->host; | |
| struct domain_device *dev = cmd_to_domain_dev(cmd); | |
| struct sas_internal *i = to_sas_internal(host->transportt); | |
| if (current != host->ehandler) | |
| return sas_queue_reset(dev, SAS_DEV_LU_RESET, cmd->device->lun, 0); | |
| int_to_scsilun(cmd->device->lun, &lun); | |
| if (!i->dft->lldd_lu_reset) | |
| return FAILED; | |
| res = i->dft->lldd_lu_reset(dev, lun.scsi_lun); | |
| if (res == TMF_RESP_FUNC_SUCC || res == TMF_RESP_FUNC_COMPLETE) | |
| return SUCCESS; | |
| return FAILED; | |
| } | |
| int sas_eh_bus_reset_handler(struct scsi_cmnd *cmd) | |
| { | |
| int res; | |
| struct Scsi_Host *host = cmd->device->host; | |
| struct domain_device *dev = cmd_to_domain_dev(cmd); | |
| struct sas_internal *i = to_sas_internal(host->transportt); | |
| if (current != host->ehandler) | |
| return sas_queue_reset(dev, SAS_DEV_RESET, 0, 0); | |
| if (!i->dft->lldd_I_T_nexus_reset) | |
| return FAILED; | |
| res = i->dft->lldd_I_T_nexus_reset(dev); | |
| if (res == TMF_RESP_FUNC_SUCC || res == TMF_RESP_FUNC_COMPLETE || | |
| res == -ENODEV) | |
| return SUCCESS; | |
| return FAILED; | |
| } | |
| /* Try to reset a device */ | |
| static int try_to_reset_cmd_device(struct scsi_cmnd *cmd) | |
| { | |
| int res; | |
| struct Scsi_Host *shost = cmd->device->host; | |
| if (!shost->hostt->eh_device_reset_handler) | |
| goto try_bus_reset; | |
| res = shost->hostt->eh_device_reset_handler(cmd); | |
| if (res == SUCCESS) | |
| return res; | |
| try_bus_reset: | |
| if (shost->hostt->eh_bus_reset_handler) | |
| return shost->hostt->eh_bus_reset_handler(cmd); | |
| return FAILED; | |
| } | |
| static void sas_eh_handle_sas_errors(struct Scsi_Host *shost, struct list_head *work_q) | |
| { | |
| struct scsi_cmnd *cmd, *n; | |
| enum task_disposition res = TASK_IS_DONE; | |
| int tmf_resp, need_reset; | |
| struct sas_internal *i = to_sas_internal(shost->transportt); | |
| unsigned long flags; | |
| struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost); | |
| LIST_HEAD(done); | |
| /* clean out any commands that won the completion vs eh race */ | |
| list_for_each_entry_safe(cmd, n, work_q, eh_entry) { | |
| struct domain_device *dev = cmd_to_domain_dev(cmd); | |
| struct sas_task *task; | |
| spin_lock_irqsave(&dev->done_lock, flags); | |
| /* by this point the lldd has either observed | |
| * SAS_HA_FROZEN and is leaving the task alone, or has | |
| * won the race with eh and decided to complete it | |
| */ | |
| task = TO_SAS_TASK(cmd); | |
| spin_unlock_irqrestore(&dev->done_lock, flags); | |
| if (!task) | |
| list_move_tail(&cmd->eh_entry, &done); | |
| } | |
| Again: | |
| list_for_each_entry_safe(cmd, n, work_q, eh_entry) { | |
| struct sas_task *task = TO_SAS_TASK(cmd); | |
| list_del_init(&cmd->eh_entry); | |
| spin_lock_irqsave(&task->task_state_lock, flags); | |
| need_reset = task->task_state_flags & SAS_TASK_NEED_DEV_RESET; | |
| spin_unlock_irqrestore(&task->task_state_lock, flags); | |
| if (need_reset) { | |
| SAS_DPRINTK("%s: task 0x%p requests reset\n", | |
| __func__, task); | |
| goto reset; | |
| } | |
| SAS_DPRINTK("trying to find task 0x%p\n", task); | |
| res = sas_scsi_find_task(task); | |
| cmd->eh_eflags = 0; | |
| switch (res) { | |
| case TASK_IS_DONE: | |
| SAS_DPRINTK("%s: task 0x%p is done\n", __func__, | |
| task); | |
| sas_eh_defer_cmd(cmd); | |
| continue; | |
| case TASK_IS_ABORTED: | |
| SAS_DPRINTK("%s: task 0x%p is aborted\n", | |
| __func__, task); | |
| sas_eh_defer_cmd(cmd); | |
| continue; | |
| case TASK_IS_AT_LU: | |
| SAS_DPRINTK("task 0x%p is at LU: lu recover\n", task); | |
| reset: | |
| tmf_resp = sas_recover_lu(task->dev, cmd); | |
| if (tmf_resp == TMF_RESP_FUNC_COMPLETE) { | |
| SAS_DPRINTK("dev %016llx LU %llx is " | |
| "recovered\n", | |
| SAS_ADDR(task->dev), | |
| cmd->device->lun); | |
| sas_eh_defer_cmd(cmd); | |
| sas_scsi_clear_queue_lu(work_q, cmd); | |
| goto Again; | |
| } | |
| /* fallthrough */ | |
| case TASK_IS_NOT_AT_LU: | |
| case TASK_ABORT_FAILED: | |
| SAS_DPRINTK("task 0x%p is not at LU: I_T recover\n", | |
| task); | |
| tmf_resp = sas_recover_I_T(task->dev); | |
| if (tmf_resp == TMF_RESP_FUNC_COMPLETE || | |
| tmf_resp == -ENODEV) { | |
| struct domain_device *dev = task->dev; | |
| SAS_DPRINTK("I_T %016llx recovered\n", | |
| SAS_ADDR(task->dev->sas_addr)); | |
| sas_eh_finish_cmd(cmd); | |
| sas_scsi_clear_queue_I_T(work_q, dev); | |
| goto Again; | |
| } | |
| /* Hammer time :-) */ | |
| try_to_reset_cmd_device(cmd); | |
| if (i->dft->lldd_clear_nexus_port) { | |
| struct asd_sas_port *port = task->dev->port; | |
| SAS_DPRINTK("clearing nexus for port:%d\n", | |
| port->id); | |
| res = i->dft->lldd_clear_nexus_port(port); | |
| if (res == TMF_RESP_FUNC_COMPLETE) { | |
| SAS_DPRINTK("clear nexus port:%d " | |
| "succeeded\n", port->id); | |
| sas_eh_finish_cmd(cmd); | |
| sas_scsi_clear_queue_port(work_q, | |
| port); | |
| goto Again; | |
| } | |
| } | |
| if (i->dft->lldd_clear_nexus_ha) { | |
| SAS_DPRINTK("clear nexus ha\n"); | |
| res = i->dft->lldd_clear_nexus_ha(ha); | |
| if (res == TMF_RESP_FUNC_COMPLETE) { | |
| SAS_DPRINTK("clear nexus ha " | |
| "succeeded\n"); | |
| sas_eh_finish_cmd(cmd); | |
| goto clear_q; | |
| } | |
| } | |
| /* If we are here -- this means that no amount | |
| * of effort could recover from errors. Quite | |
| * possibly the HA just disappeared. | |
| */ | |
| SAS_DPRINTK("error from device %llx, LUN %llx " | |
| "couldn't be recovered in any way\n", | |
| SAS_ADDR(task->dev->sas_addr), | |
| cmd->device->lun); | |
| sas_eh_finish_cmd(cmd); | |
| goto clear_q; | |
| } | |
| } | |
| out: | |
| list_splice_tail(&done, work_q); | |
| list_splice_tail_init(&ha->eh_ata_q, work_q); | |
| return; | |
| clear_q: | |
| SAS_DPRINTK("--- Exit %s -- clear_q\n", __func__); | |
| list_for_each_entry_safe(cmd, n, work_q, eh_entry) | |
| sas_eh_finish_cmd(cmd); | |
| goto out; | |
| } | |
| static void sas_eh_handle_resets(struct Scsi_Host *shost) | |
| { | |
| struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost); | |
| struct sas_internal *i = to_sas_internal(shost->transportt); | |
| /* handle directed resets to sas devices */ | |
| spin_lock_irq(&ha->lock); | |
| while (!list_empty(&ha->eh_dev_q)) { | |
| struct domain_device *dev; | |
| struct ssp_device *ssp; | |
| ssp = list_entry(ha->eh_dev_q.next, typeof(*ssp), eh_list_node); | |
| list_del_init(&ssp->eh_list_node); | |
| dev = container_of(ssp, typeof(*dev), ssp_dev); | |
| kref_get(&dev->kref); | |
| WARN_ONCE(dev_is_sata(dev), "ssp reset to ata device?\n"); | |
| spin_unlock_irq(&ha->lock); | |
| if (test_and_clear_bit(SAS_DEV_LU_RESET, &dev->state)) | |
| i->dft->lldd_lu_reset(dev, ssp->reset_lun.scsi_lun); | |
| if (test_and_clear_bit(SAS_DEV_RESET, &dev->state)) | |
| i->dft->lldd_I_T_nexus_reset(dev); | |
| sas_put_device(dev); | |
| spin_lock_irq(&ha->lock); | |
| clear_bit(SAS_DEV_EH_PENDING, &dev->state); | |
| ha->eh_active--; | |
| } | |
| spin_unlock_irq(&ha->lock); | |
| } | |
| void sas_scsi_recover_host(struct Scsi_Host *shost) | |
| { | |
| struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost); | |
| LIST_HEAD(eh_work_q); | |
| int tries = 0; | |
| bool retry; | |
| retry: | |
| tries++; | |
| retry = true; | |
| spin_lock_irq(shost->host_lock); | |
| list_splice_init(&shost->eh_cmd_q, &eh_work_q); | |
| spin_unlock_irq(shost->host_lock); | |
| SAS_DPRINTK("Enter %s busy: %d failed: %d\n", | |
| __func__, atomic_read(&shost->host_busy), shost->host_failed); | |
| /* | |
| * Deal with commands that still have SAS tasks (i.e. they didn't | |
| * complete via the normal sas_task completion mechanism), | |
| * SAS_HA_FROZEN gives eh dominion over all sas_task completion. | |
| */ | |
| set_bit(SAS_HA_FROZEN, &ha->state); | |
| sas_eh_handle_sas_errors(shost, &eh_work_q); | |
| clear_bit(SAS_HA_FROZEN, &ha->state); | |
| if (list_empty(&eh_work_q)) | |
| goto out; | |
| /* | |
| * Now deal with SCSI commands that completed ok but have a an error | |
| * code (and hopefully sense data) attached. This is roughly what | |
| * scsi_unjam_host does, but we skip scsi_eh_abort_cmds because any | |
| * command we see here has no sas_task and is thus unknown to the HA. | |
| */ | |
| sas_ata_eh(shost, &eh_work_q, &ha->eh_done_q); | |
| if (!scsi_eh_get_sense(&eh_work_q, &ha->eh_done_q)) | |
| scsi_eh_ready_devs(shost, &eh_work_q, &ha->eh_done_q); | |
| out: | |
| sas_eh_handle_resets(shost); | |
| /* now link into libata eh --- if we have any ata devices */ | |
| sas_ata_strategy_handler(shost); | |
| scsi_eh_flush_done_q(&ha->eh_done_q); | |
| /* check if any new eh work was scheduled during the last run */ | |
| spin_lock_irq(&ha->lock); | |
| if (ha->eh_active == 0) { | |
| shost->host_eh_scheduled = 0; | |
| retry = false; | |
| } | |
| spin_unlock_irq(&ha->lock); | |
| if (retry) | |
| goto retry; | |
| SAS_DPRINTK("--- Exit %s: busy: %d failed: %d tries: %d\n", | |
| __func__, atomic_read(&shost->host_busy), | |
| shost->host_failed, tries); | |
| } | |
| enum blk_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *cmd) | |
| { | |
| scmd_dbg(cmd, "command %p timed out\n", cmd); | |
| return BLK_EH_NOT_HANDLED; | |
| } | |
| int sas_ioctl(struct scsi_device *sdev, int cmd, void __user *arg) | |
| { | |
| struct domain_device *dev = sdev_to_domain_dev(sdev); | |
| if (dev_is_sata(dev)) | |
| return ata_sas_scsi_ioctl(dev->sata_dev.ap, sdev, cmd, arg); | |
| return -EINVAL; | |
| } | |
| struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy) | |
| { | |
| struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent); | |
| struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost); | |
| struct domain_device *found_dev = NULL; | |
| int i; | |
| unsigned long flags; | |
| spin_lock_irqsave(&ha->phy_port_lock, flags); | |
| for (i = 0; i < ha->num_phys; i++) { | |
| struct asd_sas_port *port = ha->sas_port[i]; | |
| struct domain_device *dev; | |
| spin_lock(&port->dev_list_lock); | |
| list_for_each_entry(dev, &port->dev_list, dev_list_node) { | |
| if (rphy == dev->rphy) { | |
| found_dev = dev; | |
| spin_unlock(&port->dev_list_lock); | |
| goto found; | |
| } | |
| } | |
| spin_unlock(&port->dev_list_lock); | |
| } | |
| found: | |
| spin_unlock_irqrestore(&ha->phy_port_lock, flags); | |
| return found_dev; | |
| } | |
| int sas_target_alloc(struct scsi_target *starget) | |
| { | |
| struct sas_rphy *rphy = dev_to_rphy(starget->dev.parent); | |
| struct domain_device *found_dev = sas_find_dev_by_rphy(rphy); | |
| if (!found_dev) | |
| return -ENODEV; | |
| kref_get(&found_dev->kref); | |
| starget->hostdata = found_dev; | |
| return 0; | |
| } | |
| #define SAS_DEF_QD 256 | |
| int sas_slave_configure(struct scsi_device *scsi_dev) | |
| { | |
| struct domain_device *dev = sdev_to_domain_dev(scsi_dev); | |
| struct sas_ha_struct *sas_ha; | |
| BUG_ON(dev->rphy->identify.device_type != SAS_END_DEVICE); | |
| if (dev_is_sata(dev)) { | |
| ata_sas_slave_configure(scsi_dev, dev->sata_dev.ap); | |
| return 0; | |
| } | |
| sas_ha = dev->port->ha; | |
| sas_read_port_mode_page(scsi_dev); | |
| if (scsi_dev->tagged_supported) { | |
| scsi_change_queue_depth(scsi_dev, SAS_DEF_QD); | |
| } else { | |
| SAS_DPRINTK("device %llx, LUN %llx doesn't support " | |
| "TCQ\n", SAS_ADDR(dev->sas_addr), | |
| scsi_dev->lun); | |
| scsi_change_queue_depth(scsi_dev, 1); | |
| } | |
| scsi_dev->allow_restart = 1; | |
| return 0; | |
| } | |
| int sas_change_queue_depth(struct scsi_device *sdev, int depth) | |
| { | |
| struct domain_device *dev = sdev_to_domain_dev(sdev); | |
| if (dev_is_sata(dev)) | |
| return __ata_change_queue_depth(dev->sata_dev.ap, sdev, depth); | |
| if (!sdev->tagged_supported) | |
| depth = 1; | |
| return scsi_change_queue_depth(sdev, depth); | |
| } | |
| int sas_bios_param(struct scsi_device *scsi_dev, | |
| struct block_device *bdev, | |
| sector_t capacity, int *hsc) | |
| { | |
| hsc[0] = 255; | |
| hsc[1] = 63; | |
| sector_div(capacity, 255*63); | |
| hsc[2] = capacity; | |
| return 0; | |
| } | |
| /* | |
| * Tell an upper layer that it needs to initiate an abort for a given task. | |
| * This should only ever be called by an LLDD. | |
| */ | |
| void sas_task_abort(struct sas_task *task) | |
| { | |
| struct scsi_cmnd *sc = task->uldd_task; | |
| /* Escape for libsas internal commands */ | |
| if (!sc) { | |
| struct sas_task_slow *slow = task->slow_task; | |
| if (!slow) | |
| return; | |
| if (!del_timer(&slow->timer)) | |
| return; | |
| slow->timer.function(slow->timer.data); | |
| return; | |
| } | |
| if (dev_is_sata(task->dev)) { | |
| sas_ata_task_abort(task); | |
| } else { | |
| struct request_queue *q = sc->device->request_queue; | |
| unsigned long flags; | |
| spin_lock_irqsave(q->queue_lock, flags); | |
| blk_abort_request(sc->request); | |
| spin_unlock_irqrestore(q->queue_lock, flags); | |
| } | |
| } | |
| void sas_target_destroy(struct scsi_target *starget) | |
| { | |
| struct domain_device *found_dev = starget->hostdata; | |
| if (!found_dev) | |
| return; | |
| starget->hostdata = NULL; | |
| sas_put_device(found_dev); | |
| } | |
| static void sas_parse_addr(u8 *sas_addr, const char *p) | |
| { | |
| int i; | |
| for (i = 0; i < SAS_ADDR_SIZE; i++) { | |
| u8 h, l; | |
| if (!*p) | |
| break; | |
| h = isdigit(*p) ? *p-'0' : toupper(*p)-'A'+10; | |
| p++; | |
| l = isdigit(*p) ? *p-'0' : toupper(*p)-'A'+10; | |
| p++; | |
| sas_addr[i] = (h<<4) | l; | |
| } | |
| } | |
| #define SAS_STRING_ADDR_SIZE 16 | |
| int sas_request_addr(struct Scsi_Host *shost, u8 *addr) | |
| { | |
| int res; | |
| const struct firmware *fw; | |
| res = request_firmware(&fw, "sas_addr", &shost->shost_gendev); | |
| if (res) | |
| return res; | |
| if (fw->size < SAS_STRING_ADDR_SIZE) { | |
| res = -ENODEV; | |
| goto out; | |
| } | |
| sas_parse_addr(addr, fw->data); | |
| out: | |
| release_firmware(fw); | |
| return res; | |
| } | |
| EXPORT_SYMBOL_GPL(sas_request_addr); | |
| EXPORT_SYMBOL_GPL(sas_queuecommand); | |
| EXPORT_SYMBOL_GPL(sas_target_alloc); | |
| EXPORT_SYMBOL_GPL(sas_slave_configure); | |
| EXPORT_SYMBOL_GPL(sas_change_queue_depth); | |
| EXPORT_SYMBOL_GPL(sas_bios_param); | |
| EXPORT_SYMBOL_GPL(sas_task_abort); | |
| EXPORT_SYMBOL_GPL(sas_phy_reset); | |
| EXPORT_SYMBOL_GPL(sas_eh_device_reset_handler); | |
| EXPORT_SYMBOL_GPL(sas_eh_bus_reset_handler); | |
| EXPORT_SYMBOL_GPL(sas_target_destroy); | |
| EXPORT_SYMBOL_GPL(sas_ioctl); |