| /******************************************************************* | |
| * This file is part of the Emulex Linux Device Driver for * | |
| * Fibre Channel Host Bus Adapters. * | |
| * Copyright (C) 2004-2016 Emulex. All rights reserved. * | |
| * EMULEX and SLI are trademarks of Emulex. * | |
| * www.emulex.com * | |
| * Portions Copyright (C) 2004-2005 Christoph Hellwig * | |
| * * | |
| * This program is free software; you can redistribute it and/or * | |
| * modify it under the terms of version 2 of the GNU General * | |
| * Public License as published by the Free Software Foundation. * | |
| * This program is distributed in the hope that it will be useful. * | |
| * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * | |
| * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * | |
| * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * | |
| * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * | |
| * TO BE LEGALLY INVALID. See the GNU General Public License for * | |
| * more details, a copy of which can be found in the file COPYING * | |
| * included with this package. * | |
| *******************************************************************/ | |
| #include <linux/blkdev.h> | |
| #include <linux/delay.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/idr.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/kthread.h> | |
| #include <linux/pci.h> | |
| #include <linux/slab.h> | |
| #include <linux/spinlock.h> | |
| #include <scsi/scsi.h> | |
| #include <scsi/scsi_device.h> | |
| #include <scsi/scsi_host.h> | |
| #include <scsi/scsi_transport_fc.h> | |
| #include "lpfc_hw4.h" | |
| #include "lpfc_hw.h" | |
| #include "lpfc_sli.h" | |
| #include "lpfc_sli4.h" | |
| #include "lpfc_nl.h" | |
| #include "lpfc_disc.h" | |
| #include "lpfc_scsi.h" | |
| #include "lpfc.h" | |
| #include "lpfc_logmsg.h" | |
| #include "lpfc_crtn.h" | |
| #include "lpfc_version.h" | |
| #include "lpfc_vport.h" | |
| inline void lpfc_vport_set_state(struct lpfc_vport *vport, | |
| enum fc_vport_state new_state) | |
| { | |
| struct fc_vport *fc_vport = vport->fc_vport; | |
| if (fc_vport) { | |
| /* | |
| * When the transport defines fc_vport_set state we will replace | |
| * this code with the following line | |
| */ | |
| /* fc_vport_set_state(fc_vport, new_state); */ | |
| if (new_state != FC_VPORT_INITIALIZING) | |
| fc_vport->vport_last_state = fc_vport->vport_state; | |
| fc_vport->vport_state = new_state; | |
| } | |
| /* for all the error states we will set the invternal state to FAILED */ | |
| switch (new_state) { | |
| case FC_VPORT_NO_FABRIC_SUPP: | |
| case FC_VPORT_NO_FABRIC_RSCS: | |
| case FC_VPORT_FABRIC_LOGOUT: | |
| case FC_VPORT_FABRIC_REJ_WWN: | |
| case FC_VPORT_FAILED: | |
| vport->port_state = LPFC_VPORT_FAILED; | |
| break; | |
| case FC_VPORT_LINKDOWN: | |
| vport->port_state = LPFC_VPORT_UNKNOWN; | |
| break; | |
| default: | |
| /* do nothing */ | |
| break; | |
| } | |
| } | |
| int | |
| lpfc_alloc_vpi(struct lpfc_hba *phba) | |
| { | |
| unsigned long vpi; | |
| spin_lock_irq(&phba->hbalock); | |
| /* Start at bit 1 because vpi zero is reserved for the physical port */ | |
| vpi = find_next_zero_bit(phba->vpi_bmask, (phba->max_vpi + 1), 1); | |
| if (vpi > phba->max_vpi) | |
| vpi = 0; | |
| else | |
| set_bit(vpi, phba->vpi_bmask); | |
| if (phba->sli_rev == LPFC_SLI_REV4) | |
| phba->sli4_hba.max_cfg_param.vpi_used++; | |
| spin_unlock_irq(&phba->hbalock); | |
| return vpi; | |
| } | |
| static void | |
| lpfc_free_vpi(struct lpfc_hba *phba, int vpi) | |
| { | |
| if (vpi == 0) | |
| return; | |
| spin_lock_irq(&phba->hbalock); | |
| clear_bit(vpi, phba->vpi_bmask); | |
| if (phba->sli_rev == LPFC_SLI_REV4) | |
| phba->sli4_hba.max_cfg_param.vpi_used--; | |
| spin_unlock_irq(&phba->hbalock); | |
| } | |
| static int | |
| lpfc_vport_sparm(struct lpfc_hba *phba, struct lpfc_vport *vport) | |
| { | |
| LPFC_MBOXQ_t *pmb; | |
| MAILBOX_t *mb; | |
| struct lpfc_dmabuf *mp; | |
| int rc; | |
| pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | |
| if (!pmb) { | |
| return -ENOMEM; | |
| } | |
| mb = &pmb->u.mb; | |
| rc = lpfc_read_sparam(phba, pmb, vport->vpi); | |
| if (rc) { | |
| mempool_free(pmb, phba->mbox_mem_pool); | |
| return -ENOMEM; | |
| } | |
| /* | |
| * Grab buffer pointer and clear context1 so we can use | |
| * lpfc_sli_issue_box_wait | |
| */ | |
| mp = (struct lpfc_dmabuf *) pmb->context1; | |
| pmb->context1 = NULL; | |
| pmb->vport = vport; | |
| rc = lpfc_sli_issue_mbox_wait(phba, pmb, phba->fc_ratov * 2); | |
| if (rc != MBX_SUCCESS) { | |
| if (signal_pending(current)) { | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT | LOG_VPORT, | |
| "1830 Signal aborted mbxCmd x%x\n", | |
| mb->mbxCommand); | |
| lpfc_mbuf_free(phba, mp->virt, mp->phys); | |
| kfree(mp); | |
| if (rc != MBX_TIMEOUT) | |
| mempool_free(pmb, phba->mbox_mem_pool); | |
| return -EINTR; | |
| } else { | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT | LOG_VPORT, | |
| "1818 VPort failed init, mbxCmd x%x " | |
| "READ_SPARM mbxStatus x%x, rc = x%x\n", | |
| mb->mbxCommand, mb->mbxStatus, rc); | |
| lpfc_mbuf_free(phba, mp->virt, mp->phys); | |
| kfree(mp); | |
| if (rc != MBX_TIMEOUT) | |
| mempool_free(pmb, phba->mbox_mem_pool); | |
| return -EIO; | |
| } | |
| } | |
| memcpy(&vport->fc_sparam, mp->virt, sizeof (struct serv_parm)); | |
| memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName, | |
| sizeof (struct lpfc_name)); | |
| memcpy(&vport->fc_portname, &vport->fc_sparam.portName, | |
| sizeof (struct lpfc_name)); | |
| lpfc_mbuf_free(phba, mp->virt, mp->phys); | |
| kfree(mp); | |
| mempool_free(pmb, phba->mbox_mem_pool); | |
| return 0; | |
| } | |
| static int | |
| lpfc_valid_wwn_format(struct lpfc_hba *phba, struct lpfc_name *wwn, | |
| const char *name_type) | |
| { | |
| /* ensure that IEEE format 1 addresses | |
| * contain zeros in bits 59-48 | |
| */ | |
| if (!((wwn->u.wwn[0] >> 4) == 1 && | |
| ((wwn->u.wwn[0] & 0xf) != 0 || (wwn->u.wwn[1] & 0xf) != 0))) | |
| return 1; | |
| lpfc_printf_log(phba, KERN_ERR, LOG_VPORT, | |
| "1822 Invalid %s: %02x:%02x:%02x:%02x:" | |
| "%02x:%02x:%02x:%02x\n", | |
| name_type, | |
| wwn->u.wwn[0], wwn->u.wwn[1], | |
| wwn->u.wwn[2], wwn->u.wwn[3], | |
| wwn->u.wwn[4], wwn->u.wwn[5], | |
| wwn->u.wwn[6], wwn->u.wwn[7]); | |
| return 0; | |
| } | |
| static int | |
| lpfc_unique_wwpn(struct lpfc_hba *phba, struct lpfc_vport *new_vport) | |
| { | |
| struct lpfc_vport *vport; | |
| unsigned long flags; | |
| spin_lock_irqsave(&phba->hbalock, flags); | |
| list_for_each_entry(vport, &phba->port_list, listentry) { | |
| if (vport == new_vport) | |
| continue; | |
| /* If they match, return not unique */ | |
| if (memcmp(&vport->fc_sparam.portName, | |
| &new_vport->fc_sparam.portName, | |
| sizeof(struct lpfc_name)) == 0) { | |
| spin_unlock_irqrestore(&phba->hbalock, flags); | |
| return 0; | |
| } | |
| } | |
| spin_unlock_irqrestore(&phba->hbalock, flags); | |
| return 1; | |
| } | |
| /** | |
| * lpfc_discovery_wait - Wait for driver discovery to quiesce | |
| * @vport: The virtual port for which this call is being executed. | |
| * | |
| * This driver calls this routine specifically from lpfc_vport_delete | |
| * to enforce a synchronous execution of vport | |
| * delete relative to discovery activities. The | |
| * lpfc_vport_delete routine should not return until it | |
| * can reasonably guarantee that discovery has quiesced. | |
| * Post FDISC LOGO, the driver must wait until its SAN teardown is | |
| * complete and all resources recovered before allowing | |
| * cleanup. | |
| * | |
| * This routine does not require any locks held. | |
| **/ | |
| static void lpfc_discovery_wait(struct lpfc_vport *vport) | |
| { | |
| struct lpfc_hba *phba = vport->phba; | |
| uint32_t wait_flags = 0; | |
| unsigned long wait_time_max; | |
| unsigned long start_time; | |
| wait_flags = FC_RSCN_MODE | FC_RSCN_DISCOVERY | FC_NLP_MORE | | |
| FC_RSCN_DEFERRED | FC_NDISC_ACTIVE | FC_DISC_TMO; | |
| /* | |
| * The time constraint on this loop is a balance between the | |
| * fabric RA_TOV value and dev_loss tmo. The driver's | |
| * devloss_tmo is 10 giving this loop a 3x multiplier minimally. | |
| */ | |
| wait_time_max = msecs_to_jiffies(((phba->fc_ratov * 3) + 3) * 1000); | |
| wait_time_max += jiffies; | |
| start_time = jiffies; | |
| while (time_before(jiffies, wait_time_max)) { | |
| if ((vport->num_disc_nodes > 0) || | |
| (vport->fc_flag & wait_flags) || | |
| ((vport->port_state > LPFC_VPORT_FAILED) && | |
| (vport->port_state < LPFC_VPORT_READY))) { | |
| lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT, | |
| "1833 Vport discovery quiesce Wait:" | |
| " state x%x fc_flags x%x" | |
| " num_nodes x%x, waiting 1000 msecs" | |
| " total wait msecs x%x\n", | |
| vport->port_state, vport->fc_flag, | |
| vport->num_disc_nodes, | |
| jiffies_to_msecs(jiffies - start_time)); | |
| msleep(1000); | |
| } else { | |
| /* Base case. Wait variants satisfied. Break out */ | |
| lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT, | |
| "1834 Vport discovery quiesced:" | |
| " state x%x fc_flags x%x" | |
| " wait msecs x%x\n", | |
| vport->port_state, vport->fc_flag, | |
| jiffies_to_msecs(jiffies | |
| - start_time)); | |
| break; | |
| } | |
| } | |
| if (time_after(jiffies, wait_time_max)) | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, | |
| "1835 Vport discovery quiesce failed:" | |
| " state x%x fc_flags x%x wait msecs x%x\n", | |
| vport->port_state, vport->fc_flag, | |
| jiffies_to_msecs(jiffies - start_time)); | |
| } | |
| int | |
| lpfc_vport_create(struct fc_vport *fc_vport, bool disable) | |
| { | |
| struct lpfc_nodelist *ndlp; | |
| struct Scsi_Host *shost = fc_vport->shost; | |
| struct lpfc_vport *pport = (struct lpfc_vport *) shost->hostdata; | |
| struct lpfc_hba *phba = pport->phba; | |
| struct lpfc_vport *vport = NULL; | |
| int instance; | |
| int vpi; | |
| int rc = VPORT_ERROR; | |
| int status; | |
| if ((phba->sli_rev < 3) || !(phba->cfg_enable_npiv)) { | |
| lpfc_printf_log(phba, KERN_ERR, LOG_VPORT, | |
| "1808 Create VPORT failed: " | |
| "NPIV is not enabled: SLImode:%d\n", | |
| phba->sli_rev); | |
| rc = VPORT_INVAL; | |
| goto error_out; | |
| } | |
| vpi = lpfc_alloc_vpi(phba); | |
| if (vpi == 0) { | |
| lpfc_printf_log(phba, KERN_ERR, LOG_VPORT, | |
| "1809 Create VPORT failed: " | |
| "Max VPORTs (%d) exceeded\n", | |
| phba->max_vpi); | |
| rc = VPORT_NORESOURCES; | |
| goto error_out; | |
| } | |
| /* Assign an unused board number */ | |
| if ((instance = lpfc_get_instance()) < 0) { | |
| lpfc_printf_log(phba, KERN_ERR, LOG_VPORT, | |
| "1810 Create VPORT failed: Cannot get " | |
| "instance number\n"); | |
| lpfc_free_vpi(phba, vpi); | |
| rc = VPORT_NORESOURCES; | |
| goto error_out; | |
| } | |
| vport = lpfc_create_port(phba, instance, &fc_vport->dev); | |
| if (!vport) { | |
| lpfc_printf_log(phba, KERN_ERR, LOG_VPORT, | |
| "1811 Create VPORT failed: vpi x%x\n", vpi); | |
| lpfc_free_vpi(phba, vpi); | |
| rc = VPORT_NORESOURCES; | |
| goto error_out; | |
| } | |
| vport->vpi = vpi; | |
| lpfc_debugfs_initialize(vport); | |
| if ((status = lpfc_vport_sparm(phba, vport))) { | |
| if (status == -EINTR) { | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, | |
| "1831 Create VPORT Interrupted.\n"); | |
| rc = VPORT_ERROR; | |
| } else { | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, | |
| "1813 Create VPORT failed. " | |
| "Cannot get sparam\n"); | |
| rc = VPORT_NORESOURCES; | |
| } | |
| lpfc_free_vpi(phba, vpi); | |
| destroy_port(vport); | |
| goto error_out; | |
| } | |
| u64_to_wwn(fc_vport->node_name, vport->fc_nodename.u.wwn); | |
| u64_to_wwn(fc_vport->port_name, vport->fc_portname.u.wwn); | |
| memcpy(&vport->fc_sparam.portName, vport->fc_portname.u.wwn, 8); | |
| memcpy(&vport->fc_sparam.nodeName, vport->fc_nodename.u.wwn, 8); | |
| if (!lpfc_valid_wwn_format(phba, &vport->fc_sparam.nodeName, "WWNN") || | |
| !lpfc_valid_wwn_format(phba, &vport->fc_sparam.portName, "WWPN")) { | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, | |
| "1821 Create VPORT failed. " | |
| "Invalid WWN format\n"); | |
| lpfc_free_vpi(phba, vpi); | |
| destroy_port(vport); | |
| rc = VPORT_INVAL; | |
| goto error_out; | |
| } | |
| if (!lpfc_unique_wwpn(phba, vport)) { | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, | |
| "1823 Create VPORT failed. " | |
| "Duplicate WWN on HBA\n"); | |
| lpfc_free_vpi(phba, vpi); | |
| destroy_port(vport); | |
| rc = VPORT_INVAL; | |
| goto error_out; | |
| } | |
| /* Create binary sysfs attribute for vport */ | |
| lpfc_alloc_sysfs_attr(vport); | |
| /* Set the DFT_LUN_Q_DEPTH accordingly */ | |
| vport->cfg_lun_queue_depth = phba->pport->cfg_lun_queue_depth; | |
| *(struct lpfc_vport **)fc_vport->dd_data = vport; | |
| vport->fc_vport = fc_vport; | |
| /* At this point we are fully registered with SCSI Layer. */ | |
| vport->load_flag |= FC_ALLOW_FDMI; | |
| if (phba->cfg_enable_SmartSAN || | |
| (phba->cfg_fdmi_on == LPFC_FDMI_SUPPORT)) { | |
| /* Setup appropriate attribute masks */ | |
| vport->fdmi_hba_mask = phba->pport->fdmi_hba_mask; | |
| vport->fdmi_port_mask = phba->pport->fdmi_port_mask; | |
| } | |
| /* | |
| * In SLI4, the vpi must be activated before it can be used | |
| * by the port. | |
| */ | |
| if ((phba->sli_rev == LPFC_SLI_REV4) && | |
| (pport->fc_flag & FC_VFI_REGISTERED)) { | |
| rc = lpfc_sli4_init_vpi(vport); | |
| if (rc) { | |
| lpfc_printf_log(phba, KERN_ERR, LOG_VPORT, | |
| "1838 Failed to INIT_VPI on vpi %d " | |
| "status %d\n", vpi, rc); | |
| rc = VPORT_NORESOURCES; | |
| lpfc_free_vpi(phba, vpi); | |
| goto error_out; | |
| } | |
| } else if (phba->sli_rev == LPFC_SLI_REV4) { | |
| /* | |
| * Driver cannot INIT_VPI now. Set the flags to | |
| * init_vpi when reg_vfi complete. | |
| */ | |
| vport->fc_flag |= FC_VPORT_NEEDS_INIT_VPI; | |
| lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN); | |
| rc = VPORT_OK; | |
| goto out; | |
| } | |
| if ((phba->link_state < LPFC_LINK_UP) || | |
| (pport->port_state < LPFC_FABRIC_CFG_LINK) || | |
| (phba->fc_topology == LPFC_TOPOLOGY_LOOP)) { | |
| lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN); | |
| rc = VPORT_OK; | |
| goto out; | |
| } | |
| if (disable) { | |
| lpfc_vport_set_state(vport, FC_VPORT_DISABLED); | |
| rc = VPORT_OK; | |
| goto out; | |
| } | |
| /* Use the Physical nodes Fabric NDLP to determine if the link is | |
| * up and ready to FDISC. | |
| */ | |
| ndlp = lpfc_findnode_did(phba->pport, Fabric_DID); | |
| if (ndlp && NLP_CHK_NODE_ACT(ndlp) && | |
| ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) { | |
| if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) { | |
| lpfc_set_disctmo(vport); | |
| lpfc_initial_fdisc(vport); | |
| } else { | |
| lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP); | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS, | |
| "0262 No NPIV Fabric support\n"); | |
| } | |
| } else { | |
| lpfc_vport_set_state(vport, FC_VPORT_FAILED); | |
| } | |
| rc = VPORT_OK; | |
| out: | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, | |
| "1825 Vport Created.\n"); | |
| lpfc_host_attrib_init(lpfc_shost_from_vport(vport)); | |
| error_out: | |
| return rc; | |
| } | |
| static int | |
| disable_vport(struct fc_vport *fc_vport) | |
| { | |
| struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data; | |
| struct lpfc_hba *phba = vport->phba; | |
| struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL; | |
| long timeout; | |
| struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | |
| ndlp = lpfc_findnode_did(vport, Fabric_DID); | |
| if (ndlp && NLP_CHK_NODE_ACT(ndlp) | |
| && phba->link_state >= LPFC_LINK_UP) { | |
| vport->unreg_vpi_cmpl = VPORT_INVAL; | |
| timeout = msecs_to_jiffies(phba->fc_ratov * 2000); | |
| if (!lpfc_issue_els_npiv_logo(vport, ndlp)) | |
| while (vport->unreg_vpi_cmpl == VPORT_INVAL && timeout) | |
| timeout = schedule_timeout(timeout); | |
| } | |
| lpfc_sli_host_down(vport); | |
| /* Mark all nodes for discovery so we can remove them by | |
| * calling lpfc_cleanup_rpis(vport, 1) | |
| */ | |
| list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { | |
| if (!NLP_CHK_NODE_ACT(ndlp)) | |
| continue; | |
| if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) | |
| continue; | |
| lpfc_disc_state_machine(vport, ndlp, NULL, | |
| NLP_EVT_DEVICE_RECOVERY); | |
| } | |
| lpfc_cleanup_rpis(vport, 1); | |
| lpfc_stop_vport_timers(vport); | |
| lpfc_unreg_all_rpis(vport); | |
| lpfc_unreg_default_rpis(vport); | |
| /* | |
| * Completion of unreg_vpi (lpfc_mbx_cmpl_unreg_vpi) does the | |
| * scsi_host_put() to release the vport. | |
| */ | |
| lpfc_mbx_unreg_vpi(vport); | |
| spin_lock_irq(shost->host_lock); | |
| vport->fc_flag |= FC_VPORT_NEEDS_INIT_VPI; | |
| spin_unlock_irq(shost->host_lock); | |
| lpfc_vport_set_state(vport, FC_VPORT_DISABLED); | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, | |
| "1826 Vport Disabled.\n"); | |
| return VPORT_OK; | |
| } | |
| static int | |
| enable_vport(struct fc_vport *fc_vport) | |
| { | |
| struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data; | |
| struct lpfc_hba *phba = vport->phba; | |
| struct lpfc_nodelist *ndlp = NULL; | |
| struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | |
| if ((phba->link_state < LPFC_LINK_UP) || | |
| (phba->fc_topology == LPFC_TOPOLOGY_LOOP)) { | |
| lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN); | |
| return VPORT_OK; | |
| } | |
| spin_lock_irq(shost->host_lock); | |
| vport->load_flag |= FC_LOADING; | |
| vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI; | |
| spin_unlock_irq(shost->host_lock); | |
| /* Use the Physical nodes Fabric NDLP to determine if the link is | |
| * up and ready to FDISC. | |
| */ | |
| ndlp = lpfc_findnode_did(phba->pport, Fabric_DID); | |
| if (ndlp && NLP_CHK_NODE_ACT(ndlp) | |
| && ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) { | |
| if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) { | |
| lpfc_set_disctmo(vport); | |
| lpfc_initial_fdisc(vport); | |
| } else { | |
| lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP); | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS, | |
| "0264 No NPIV Fabric support\n"); | |
| } | |
| } else { | |
| lpfc_vport_set_state(vport, FC_VPORT_FAILED); | |
| } | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, | |
| "1827 Vport Enabled.\n"); | |
| return VPORT_OK; | |
| } | |
| int | |
| lpfc_vport_disable(struct fc_vport *fc_vport, bool disable) | |
| { | |
| if (disable) | |
| return disable_vport(fc_vport); | |
| else | |
| return enable_vport(fc_vport); | |
| } | |
| int | |
| lpfc_vport_delete(struct fc_vport *fc_vport) | |
| { | |
| struct lpfc_nodelist *ndlp = NULL; | |
| struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data; | |
| struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | |
| struct lpfc_hba *phba = vport->phba; | |
| long timeout; | |
| bool ns_ndlp_referenced = false; | |
| if (vport->port_type == LPFC_PHYSICAL_PORT) { | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, | |
| "1812 vport_delete failed: Cannot delete " | |
| "physical host\n"); | |
| return VPORT_ERROR; | |
| } | |
| /* If the vport is a static vport fail the deletion. */ | |
| if ((vport->vport_flag & STATIC_VPORT) && | |
| !(phba->pport->load_flag & FC_UNLOADING)) { | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, | |
| "1837 vport_delete failed: Cannot delete " | |
| "static vport.\n"); | |
| return VPORT_ERROR; | |
| } | |
| spin_lock_irq(&phba->hbalock); | |
| vport->load_flag |= FC_UNLOADING; | |
| spin_unlock_irq(&phba->hbalock); | |
| /* | |
| * If we are not unloading the driver then prevent the vport_delete | |
| * from happening until after this vport's discovery is finished. | |
| */ | |
| if (!(phba->pport->load_flag & FC_UNLOADING)) { | |
| int check_count = 0; | |
| while (check_count < ((phba->fc_ratov * 3) + 3) && | |
| vport->port_state > LPFC_VPORT_FAILED && | |
| vport->port_state < LPFC_VPORT_READY) { | |
| check_count++; | |
| msleep(1000); | |
| } | |
| if (vport->port_state > LPFC_VPORT_FAILED && | |
| vport->port_state < LPFC_VPORT_READY) | |
| return -EAGAIN; | |
| } | |
| /* | |
| * This is a bit of a mess. We want to ensure the shost doesn't get | |
| * torn down until we're done with the embedded lpfc_vport structure. | |
| * | |
| * Beyond holding a reference for this function, we also need a | |
| * reference for outstanding I/O requests we schedule during delete | |
| * processing. But once we scsi_remove_host() we can no longer obtain | |
| * a reference through scsi_host_get(). | |
| * | |
| * So we take two references here. We release one reference at the | |
| * bottom of the function -- after delinking the vport. And we | |
| * release the other at the completion of the unreg_vpi that get's | |
| * initiated after we've disposed of all other resources associated | |
| * with the port. | |
| */ | |
| if (!scsi_host_get(shost)) | |
| return VPORT_INVAL; | |
| if (!scsi_host_get(shost)) { | |
| scsi_host_put(shost); | |
| return VPORT_INVAL; | |
| } | |
| lpfc_free_sysfs_attr(vport); | |
| lpfc_debugfs_terminate(vport); | |
| /* | |
| * The call to fc_remove_host might release the NameServer ndlp. Since | |
| * we might need to use the ndlp to send the DA_ID CT command, | |
| * increment the reference for the NameServer ndlp to prevent it from | |
| * being released. | |
| */ | |
| ndlp = lpfc_findnode_did(vport, NameServer_DID); | |
| if (ndlp && NLP_CHK_NODE_ACT(ndlp)) { | |
| lpfc_nlp_get(ndlp); | |
| ns_ndlp_referenced = true; | |
| } | |
| /* Remove FC host and then SCSI host with the vport */ | |
| fc_remove_host(shost); | |
| scsi_remove_host(shost); | |
| ndlp = lpfc_findnode_did(phba->pport, Fabric_DID); | |
| /* In case of driver unload, we shall not perform fabric logo as the | |
| * worker thread already stopped at this stage and, in this case, we | |
| * can safely skip the fabric logo. | |
| */ | |
| if (phba->pport->load_flag & FC_UNLOADING) { | |
| if (ndlp && NLP_CHK_NODE_ACT(ndlp) && | |
| ndlp->nlp_state == NLP_STE_UNMAPPED_NODE && | |
| phba->link_state >= LPFC_LINK_UP) { | |
| /* First look for the Fabric ndlp */ | |
| ndlp = lpfc_findnode_did(vport, Fabric_DID); | |
| if (!ndlp) | |
| goto skip_logo; | |
| else if (!NLP_CHK_NODE_ACT(ndlp)) { | |
| ndlp = lpfc_enable_node(vport, ndlp, | |
| NLP_STE_UNUSED_NODE); | |
| if (!ndlp) | |
| goto skip_logo; | |
| } | |
| /* Remove ndlp from vport npld list */ | |
| lpfc_dequeue_node(vport, ndlp); | |
| /* Indicate free memory when release */ | |
| spin_lock_irq(&phba->ndlp_lock); | |
| NLP_SET_FREE_REQ(ndlp); | |
| spin_unlock_irq(&phba->ndlp_lock); | |
| /* Kick off release ndlp when it can be safely done */ | |
| lpfc_nlp_put(ndlp); | |
| } | |
| goto skip_logo; | |
| } | |
| /* Otherwise, we will perform fabric logo as needed */ | |
| if (ndlp && NLP_CHK_NODE_ACT(ndlp) && | |
| ndlp->nlp_state == NLP_STE_UNMAPPED_NODE && | |
| phba->link_state >= LPFC_LINK_UP && | |
| phba->fc_topology != LPFC_TOPOLOGY_LOOP) { | |
| if (vport->cfg_enable_da_id) { | |
| timeout = msecs_to_jiffies(phba->fc_ratov * 2000); | |
| if (!lpfc_ns_cmd(vport, SLI_CTNS_DA_ID, 0, 0)) | |
| while (vport->ct_flags && timeout) | |
| timeout = schedule_timeout(timeout); | |
| else | |
| lpfc_printf_log(vport->phba, KERN_WARNING, | |
| LOG_VPORT, | |
| "1829 CT command failed to " | |
| "delete objects on fabric\n"); | |
| } | |
| /* First look for the Fabric ndlp */ | |
| ndlp = lpfc_findnode_did(vport, Fabric_DID); | |
| if (!ndlp) { | |
| /* Cannot find existing Fabric ndlp, allocate one */ | |
| ndlp = mempool_alloc(phba->nlp_mem_pool, GFP_KERNEL); | |
| if (!ndlp) | |
| goto skip_logo; | |
| lpfc_nlp_init(vport, ndlp, Fabric_DID); | |
| /* Indicate free memory when release */ | |
| NLP_SET_FREE_REQ(ndlp); | |
| } else { | |
| if (!NLP_CHK_NODE_ACT(ndlp)) { | |
| ndlp = lpfc_enable_node(vport, ndlp, | |
| NLP_STE_UNUSED_NODE); | |
| if (!ndlp) | |
| goto skip_logo; | |
| } | |
| /* Remove ndlp from vport list */ | |
| lpfc_dequeue_node(vport, ndlp); | |
| spin_lock_irq(&phba->ndlp_lock); | |
| if (!NLP_CHK_FREE_REQ(ndlp)) | |
| /* Indicate free memory when release */ | |
| NLP_SET_FREE_REQ(ndlp); | |
| else { | |
| /* Skip this if ndlp is already in free mode */ | |
| spin_unlock_irq(&phba->ndlp_lock); | |
| goto skip_logo; | |
| } | |
| spin_unlock_irq(&phba->ndlp_lock); | |
| } | |
| /* | |
| * If the vpi is not registered, then a valid FDISC doesn't | |
| * exist and there is no need for a ELS LOGO. Just cleanup | |
| * the ndlp. | |
| */ | |
| if (!(vport->vpi_state & LPFC_VPI_REGISTERED)) { | |
| lpfc_nlp_put(ndlp); | |
| goto skip_logo; | |
| } | |
| vport->unreg_vpi_cmpl = VPORT_INVAL; | |
| timeout = msecs_to_jiffies(phba->fc_ratov * 2000); | |
| if (!lpfc_issue_els_npiv_logo(vport, ndlp)) | |
| while (vport->unreg_vpi_cmpl == VPORT_INVAL && timeout) | |
| timeout = schedule_timeout(timeout); | |
| } | |
| if (!(phba->pport->load_flag & FC_UNLOADING)) | |
| lpfc_discovery_wait(vport); | |
| skip_logo: | |
| /* | |
| * If the NameServer ndlp has been incremented to allow the DA_ID CT | |
| * command to be sent, decrement the ndlp now. | |
| */ | |
| if (ns_ndlp_referenced) { | |
| ndlp = lpfc_findnode_did(vport, NameServer_DID); | |
| lpfc_nlp_put(ndlp); | |
| } | |
| lpfc_cleanup(vport); | |
| lpfc_sli_host_down(vport); | |
| lpfc_stop_vport_timers(vport); | |
| if (!(phba->pport->load_flag & FC_UNLOADING)) { | |
| lpfc_unreg_all_rpis(vport); | |
| lpfc_unreg_default_rpis(vport); | |
| /* | |
| * Completion of unreg_vpi (lpfc_mbx_cmpl_unreg_vpi) | |
| * does the scsi_host_put() to release the vport. | |
| */ | |
| if (!(vport->vpi_state & LPFC_VPI_REGISTERED) || | |
| lpfc_mbx_unreg_vpi(vport)) | |
| scsi_host_put(shost); | |
| } else | |
| scsi_host_put(shost); | |
| lpfc_free_vpi(phba, vport->vpi); | |
| vport->work_port_events = 0; | |
| spin_lock_irq(&phba->hbalock); | |
| list_del_init(&vport->listentry); | |
| spin_unlock_irq(&phba->hbalock); | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, | |
| "1828 Vport Deleted.\n"); | |
| scsi_host_put(shost); | |
| return VPORT_OK; | |
| } | |
| struct lpfc_vport ** | |
| lpfc_create_vport_work_array(struct lpfc_hba *phba) | |
| { | |
| struct lpfc_vport *port_iterator; | |
| struct lpfc_vport **vports; | |
| int index = 0; | |
| vports = kzalloc((phba->max_vports + 1) * sizeof(struct lpfc_vport *), | |
| GFP_KERNEL); | |
| if (vports == NULL) | |
| return NULL; | |
| spin_lock_irq(&phba->hbalock); | |
| list_for_each_entry(port_iterator, &phba->port_list, listentry) { | |
| if (port_iterator->load_flag & FC_UNLOADING) | |
| continue; | |
| if (!scsi_host_get(lpfc_shost_from_vport(port_iterator))) { | |
| lpfc_printf_vlog(port_iterator, KERN_ERR, LOG_VPORT, | |
| "1801 Create vport work array FAILED: " | |
| "cannot do scsi_host_get\n"); | |
| continue; | |
| } | |
| vports[index++] = port_iterator; | |
| } | |
| spin_unlock_irq(&phba->hbalock); | |
| return vports; | |
| } | |
| void | |
| lpfc_destroy_vport_work_array(struct lpfc_hba *phba, struct lpfc_vport **vports) | |
| { | |
| int i; | |
| if (vports == NULL) | |
| return; | |
| for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) | |
| scsi_host_put(lpfc_shost_from_vport(vports[i])); | |
| kfree(vports); | |
| } | |
| /** | |
| * lpfc_vport_reset_stat_data - Reset the statistical data for the vport | |
| * @vport: Pointer to vport object. | |
| * | |
| * This function resets the statistical data for the vport. This function | |
| * is called with the host_lock held | |
| **/ | |
| void | |
| lpfc_vport_reset_stat_data(struct lpfc_vport *vport) | |
| { | |
| struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL; | |
| list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { | |
| if (!NLP_CHK_NODE_ACT(ndlp)) | |
| continue; | |
| if (ndlp->lat_data) | |
| memset(ndlp->lat_data, 0, LPFC_MAX_BUCKET_COUNT * | |
| sizeof(struct lpfc_scsicmd_bkt)); | |
| } | |
| } | |
| /** | |
| * lpfc_alloc_bucket - Allocate data buffer required for statistical data | |
| * @vport: Pointer to vport object. | |
| * | |
| * This function allocates data buffer required for all the FC | |
| * nodes of the vport to collect statistical data. | |
| **/ | |
| void | |
| lpfc_alloc_bucket(struct lpfc_vport *vport) | |
| { | |
| struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL; | |
| list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { | |
| if (!NLP_CHK_NODE_ACT(ndlp)) | |
| continue; | |
| kfree(ndlp->lat_data); | |
| ndlp->lat_data = NULL; | |
| if (ndlp->nlp_state == NLP_STE_MAPPED_NODE) { | |
| ndlp->lat_data = kcalloc(LPFC_MAX_BUCKET_COUNT, | |
| sizeof(struct lpfc_scsicmd_bkt), | |
| GFP_ATOMIC); | |
| if (!ndlp->lat_data) | |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE, | |
| "0287 lpfc_alloc_bucket failed to " | |
| "allocate statistical data buffer DID " | |
| "0x%x\n", ndlp->nlp_DID); | |
| } | |
| } | |
| } | |
| /** | |
| * lpfc_free_bucket - Free data buffer required for statistical data | |
| * @vport: Pointer to vport object. | |
| * | |
| * Th function frees statistical data buffer of all the FC | |
| * nodes of the vport. | |
| **/ | |
| void | |
| lpfc_free_bucket(struct lpfc_vport *vport) | |
| { | |
| struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL; | |
| list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { | |
| if (!NLP_CHK_NODE_ACT(ndlp)) | |
| continue; | |
| kfree(ndlp->lat_data); | |
| ndlp->lat_data = NULL; | |
| } | |
| } |