| /* | |
| * PMC-Sierra 8001/8081/8088/8089 SAS/SATA based host adapters driver | |
| * | |
| * Copyright (c) 2008-2009 USI Co., Ltd. | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * 1. Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions, and the following disclaimer, | |
| * without modification. | |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer | |
| * substantially similar to the "NO WARRANTY" disclaimer below | |
| * ("Disclaimer") and any redistribution must be conditioned upon | |
| * including a substantially similar Disclaimer requirement for further | |
| * binary redistribution. | |
| * 3. Neither the names of the above-listed copyright holders nor the names | |
| * of any contributors may be used to endorse or promote products derived | |
| * from this software without specific prior written permission. | |
| * | |
| * Alternatively, this software may be distributed under the terms of the | |
| * GNU General Public License ("GPL") version 2 as published by the Free | |
| * Software Foundation. | |
| * | |
| * NO WARRANTY | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR | |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING | |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
| * POSSIBILITY OF SUCH DAMAGES. | |
| * | |
| */ | |
| #ifndef _PM8001_DEFS_H_ | |
| #define _PM8001_DEFS_H_ | |
| enum chip_flavors { | |
| chip_8001, | |
| chip_8008, | |
| chip_8009, | |
| chip_8018, | |
| chip_8019, | |
| chip_8074, | |
| chip_8076, | |
| chip_8077, | |
| chip_8006, | |
| chip_8070, | |
| chip_8072 | |
| }; | |
| enum phy_speed { | |
| PHY_SPEED_15 = 0x01, | |
| PHY_SPEED_30 = 0x02, | |
| PHY_SPEED_60 = 0x04, | |
| PHY_SPEED_120 = 0x08, | |
| }; | |
| enum data_direction { | |
| DATA_DIR_NONE = 0x0, /* NO TRANSFER */ | |
| DATA_DIR_IN = 0x01, /* INBOUND */ | |
| DATA_DIR_OUT = 0x02, /* OUTBOUND */ | |
| DATA_DIR_BYRECIPIENT = 0x04, /* UNSPECIFIED */ | |
| }; | |
| enum port_type { | |
| PORT_TYPE_SAS = (1L << 1), | |
| PORT_TYPE_SATA = (1L << 0), | |
| }; | |
| /* driver compile-time configuration */ | |
| #define PM8001_MAX_CCB 512 /* max ccbs supported */ | |
| #define PM8001_MPI_QUEUE 1024 /* maximum mpi queue entries */ | |
| #define PM8001_MAX_INB_NUM 1 | |
| #define PM8001_MAX_OUTB_NUM 1 | |
| #define PM8001_MAX_SPCV_INB_NUM 1 | |
| #define PM8001_MAX_SPCV_OUTB_NUM 4 | |
| #define PM8001_CAN_QUEUE 508 /* SCSI Queue depth */ | |
| /* Inbound/Outbound queue size */ | |
| #define IOMB_SIZE_SPC 64 | |
| #define IOMB_SIZE_SPCV 128 | |
| /* unchangeable hardware details */ | |
| #define PM8001_MAX_PHYS 16 /* max. possible phys */ | |
| #define PM8001_MAX_PORTS 16 /* max. possible ports */ | |
| #define PM8001_MAX_DEVICES 2048 /* max supported device */ | |
| #define PM8001_MAX_MSIX_VEC 64 /* max msi-x int for spcv/ve */ | |
| #define USI_MAX_MEMCNT_BASE 5 | |
| #define IB (USI_MAX_MEMCNT_BASE + 1) | |
| #define CI (IB + PM8001_MAX_SPCV_INB_NUM) | |
| #define OB (CI + PM8001_MAX_SPCV_INB_NUM) | |
| #define PI (OB + PM8001_MAX_SPCV_OUTB_NUM) | |
| #define USI_MAX_MEMCNT (PI + PM8001_MAX_SPCV_OUTB_NUM) | |
| #define PM8001_MAX_DMA_SG SG_ALL | |
| enum memory_region_num { | |
| AAP1 = 0x0, /* application acceleration processor */ | |
| IOP, /* IO processor */ | |
| NVMD, /* NVM device */ | |
| DEV_MEM, /* memory for devices */ | |
| CCB_MEM, /* memory for command control block */ | |
| FW_FLASH, /* memory for fw flash update */ | |
| FORENSIC_MEM /* memory for fw forensic data */ | |
| }; | |
| #define PM8001_EVENT_LOG_SIZE (128 * 1024) | |
| /*error code*/ | |
| enum mpi_err { | |
| MPI_IO_STATUS_SUCCESS = 0x0, | |
| MPI_IO_STATUS_BUSY = 0x01, | |
| MPI_IO_STATUS_FAIL = 0x02, | |
| }; | |
| /** | |
| * Phy Control constants | |
| */ | |
| enum phy_control_type { | |
| PHY_LINK_RESET = 0x01, | |
| PHY_HARD_RESET = 0x02, | |
| PHY_NOTIFY_ENABLE_SPINUP = 0x10, | |
| }; | |
| enum pm8001_hba_info_flags { | |
| PM8001F_INIT_TIME = (1U << 0), | |
| PM8001F_RUN_TIME = (1U << 1), | |
| }; | |
| #endif |