| /* | |
| * PMC-Sierra PM8001/8081/8088/8089 SAS/SATA based host adapters driver | |
| * | |
| * Copyright (c) 2008-2009 USI Co., Ltd. | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * 1. Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions, and the following disclaimer, | |
| * without modification. | |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer | |
| * substantially similar to the "NO WARRANTY" disclaimer below | |
| * ("Disclaimer") and any redistribution must be conditioned upon | |
| * including a substantially similar Disclaimer requirement for further | |
| * binary redistribution. | |
| * 3. Neither the names of the above-listed copyright holders nor the names | |
| * of any contributors may be used to endorse or promote products derived | |
| * from this software without specific prior written permission. | |
| * | |
| * Alternatively, this software may be distributed under the terms of the | |
| * GNU General Public License ("GPL") version 2 as published by the Free | |
| * Software Foundation. | |
| * | |
| * NO WARRANTY | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR | |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING | |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
| * POSSIBILITY OF SUCH DAMAGES. | |
| * | |
| */ | |
| #include <linux/slab.h> | |
| #include "pm8001_sas.h" | |
| /** | |
| * pm8001_find_tag - from sas task to find out tag that belongs to this task | |
| * @task: the task sent to the LLDD | |
| * @tag: the found tag associated with the task | |
| */ | |
| static int pm8001_find_tag(struct sas_task *task, u32 *tag) | |
| { | |
| if (task->lldd_task) { | |
| struct pm8001_ccb_info *ccb; | |
| ccb = task->lldd_task; | |
| *tag = ccb->ccb_tag; | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * pm8001_tag_free - free the no more needed tag | |
| * @pm8001_ha: our hba struct | |
| * @tag: the found tag associated with the task | |
| */ | |
| void pm8001_tag_free(struct pm8001_hba_info *pm8001_ha, u32 tag) | |
| { | |
| void *bitmap = pm8001_ha->tags; | |
| clear_bit(tag, bitmap); | |
| } | |
| /** | |
| * pm8001_tag_alloc - allocate a empty tag for task used. | |
| * @pm8001_ha: our hba struct | |
| * @tag_out: the found empty tag . | |
| */ | |
| inline int pm8001_tag_alloc(struct pm8001_hba_info *pm8001_ha, u32 *tag_out) | |
| { | |
| unsigned int tag; | |
| void *bitmap = pm8001_ha->tags; | |
| unsigned long flags; | |
| spin_lock_irqsave(&pm8001_ha->bitmap_lock, flags); | |
| tag = find_first_zero_bit(bitmap, pm8001_ha->tags_num); | |
| if (tag >= pm8001_ha->tags_num) { | |
| spin_unlock_irqrestore(&pm8001_ha->bitmap_lock, flags); | |
| return -SAS_QUEUE_FULL; | |
| } | |
| set_bit(tag, bitmap); | |
| spin_unlock_irqrestore(&pm8001_ha->bitmap_lock, flags); | |
| *tag_out = tag; | |
| return 0; | |
| } | |
| void pm8001_tag_init(struct pm8001_hba_info *pm8001_ha) | |
| { | |
| int i; | |
| for (i = 0; i < pm8001_ha->tags_num; ++i) | |
| pm8001_tag_free(pm8001_ha, i); | |
| } | |
| /** | |
| * pm8001_mem_alloc - allocate memory for pm8001. | |
| * @pdev: pci device. | |
| * @virt_addr: the allocated virtual address | |
| * @pphys_addr_hi: the physical address high byte address. | |
| * @pphys_addr_lo: the physical address low byte address. | |
| * @mem_size: memory size. | |
| */ | |
| int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr, | |
| dma_addr_t *pphys_addr, u32 *pphys_addr_hi, | |
| u32 *pphys_addr_lo, u32 mem_size, u32 align) | |
| { | |
| caddr_t mem_virt_alloc; | |
| dma_addr_t mem_dma_handle; | |
| u64 phys_align; | |
| u64 align_offset = 0; | |
| if (align) | |
| align_offset = (dma_addr_t)align - 1; | |
| mem_virt_alloc = pci_zalloc_consistent(pdev, mem_size + align, | |
| &mem_dma_handle); | |
| if (!mem_virt_alloc) { | |
| pm8001_printk("memory allocation error\n"); | |
| return -1; | |
| } | |
| *pphys_addr = mem_dma_handle; | |
| phys_align = (*pphys_addr + align_offset) & ~align_offset; | |
| *virt_addr = (void *)mem_virt_alloc + phys_align - *pphys_addr; | |
| *pphys_addr_hi = upper_32_bits(phys_align); | |
| *pphys_addr_lo = lower_32_bits(phys_align); | |
| return 0; | |
| } | |
| /** | |
| * pm8001_find_ha_by_dev - from domain device which come from sas layer to | |
| * find out our hba struct. | |
| * @dev: the domain device which from sas layer. | |
| */ | |
| static | |
| struct pm8001_hba_info *pm8001_find_ha_by_dev(struct domain_device *dev) | |
| { | |
| struct sas_ha_struct *sha = dev->port->ha; | |
| struct pm8001_hba_info *pm8001_ha = sha->lldd_ha; | |
| return pm8001_ha; | |
| } | |
| /** | |
| * pm8001_phy_control - this function should be registered to | |
| * sas_domain_function_template to provide libsas used, note: this is just | |
| * control the HBA phy rather than other expander phy if you want control | |
| * other phy, you should use SMP command. | |
| * @sas_phy: which phy in HBA phys. | |
| * @func: the operation. | |
| * @funcdata: always NULL. | |
| */ | |
| int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func, | |
| void *funcdata) | |
| { | |
| int rc = 0, phy_id = sas_phy->id; | |
| struct pm8001_hba_info *pm8001_ha = NULL; | |
| struct sas_phy_linkrates *rates; | |
| DECLARE_COMPLETION_ONSTACK(completion); | |
| unsigned long flags; | |
| pm8001_ha = sas_phy->ha->lldd_ha; | |
| pm8001_ha->phy[phy_id].enable_completion = &completion; | |
| switch (func) { | |
| case PHY_FUNC_SET_LINK_RATE: | |
| rates = funcdata; | |
| if (rates->minimum_linkrate) { | |
| pm8001_ha->phy[phy_id].minimum_linkrate = | |
| rates->minimum_linkrate; | |
| } | |
| if (rates->maximum_linkrate) { | |
| pm8001_ha->phy[phy_id].maximum_linkrate = | |
| rates->maximum_linkrate; | |
| } | |
| if (pm8001_ha->phy[phy_id].phy_state == 0) { | |
| PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id); | |
| wait_for_completion(&completion); | |
| } | |
| PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id, | |
| PHY_LINK_RESET); | |
| break; | |
| case PHY_FUNC_HARD_RESET: | |
| if (pm8001_ha->phy[phy_id].phy_state == 0) { | |
| PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id); | |
| wait_for_completion(&completion); | |
| } | |
| PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id, | |
| PHY_HARD_RESET); | |
| break; | |
| case PHY_FUNC_LINK_RESET: | |
| if (pm8001_ha->phy[phy_id].phy_state == 0) { | |
| PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id); | |
| wait_for_completion(&completion); | |
| } | |
| PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id, | |
| PHY_LINK_RESET); | |
| break; | |
| case PHY_FUNC_RELEASE_SPINUP_HOLD: | |
| PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id, | |
| PHY_LINK_RESET); | |
| break; | |
| case PHY_FUNC_DISABLE: | |
| PM8001_CHIP_DISP->phy_stop_req(pm8001_ha, phy_id); | |
| break; | |
| case PHY_FUNC_GET_EVENTS: | |
| spin_lock_irqsave(&pm8001_ha->lock, flags); | |
| if (pm8001_ha->chip_id == chip_8001) { | |
| if (-1 == pm8001_bar4_shift(pm8001_ha, | |
| (phy_id < 4) ? 0x30000 : 0x40000)) { | |
| spin_unlock_irqrestore(&pm8001_ha->lock, flags); | |
| return -EINVAL; | |
| } | |
| } | |
| { | |
| struct sas_phy *phy = sas_phy->phy; | |
| uint32_t *qp = (uint32_t *)(((char *) | |
| pm8001_ha->io_mem[2].memvirtaddr) | |
| + 0x1034 + (0x4000 * (phy_id & 3))); | |
| phy->invalid_dword_count = qp[0]; | |
| phy->running_disparity_error_count = qp[1]; | |
| phy->loss_of_dword_sync_count = qp[3]; | |
| phy->phy_reset_problem_count = qp[4]; | |
| } | |
| if (pm8001_ha->chip_id == chip_8001) | |
| pm8001_bar4_shift(pm8001_ha, 0); | |
| spin_unlock_irqrestore(&pm8001_ha->lock, flags); | |
| return 0; | |
| default: | |
| rc = -EOPNOTSUPP; | |
| } | |
| msleep(300); | |
| return rc; | |
| } | |
| /** | |
| * pm8001_scan_start - we should enable all HBA phys by sending the phy_start | |
| * command to HBA. | |
| * @shost: the scsi host data. | |
| */ | |
| void pm8001_scan_start(struct Scsi_Host *shost) | |
| { | |
| int i; | |
| struct pm8001_hba_info *pm8001_ha; | |
| struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost); | |
| pm8001_ha = sha->lldd_ha; | |
| /* SAS_RE_INITIALIZATION not available in SPCv/ve */ | |
| if (pm8001_ha->chip_id == chip_8001) | |
| PM8001_CHIP_DISP->sas_re_init_req(pm8001_ha); | |
| for (i = 0; i < pm8001_ha->chip->n_phy; ++i) | |
| PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i); | |
| } | |
| int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time) | |
| { | |
| struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost); | |
| /* give the phy enabling interrupt event time to come in (1s | |
| * is empirically about all it takes) */ | |
| if (time < HZ) | |
| return 0; | |
| /* Wait for discovery to finish */ | |
| sas_drain_work(ha); | |
| return 1; | |
| } | |
| /** | |
| * pm8001_task_prep_smp - the dispatcher function, prepare data for smp task | |
| * @pm8001_ha: our hba card information | |
| * @ccb: the ccb which attached to smp task | |
| */ | |
| static int pm8001_task_prep_smp(struct pm8001_hba_info *pm8001_ha, | |
| struct pm8001_ccb_info *ccb) | |
| { | |
| return PM8001_CHIP_DISP->smp_req(pm8001_ha, ccb); | |
| } | |
| u32 pm8001_get_ncq_tag(struct sas_task *task, u32 *tag) | |
| { | |
| struct ata_queued_cmd *qc = task->uldd_task; | |
| if (qc) { | |
| if (qc->tf.command == ATA_CMD_FPDMA_WRITE || | |
| qc->tf.command == ATA_CMD_FPDMA_READ || | |
| qc->tf.command == ATA_CMD_FPDMA_RECV || | |
| qc->tf.command == ATA_CMD_FPDMA_SEND || | |
| qc->tf.command == ATA_CMD_NCQ_NON_DATA) { | |
| *tag = qc->tag; | |
| return 1; | |
| } | |
| } | |
| return 0; | |
| } | |
| /** | |
| * pm8001_task_prep_ata - the dispatcher function, prepare data for sata task | |
| * @pm8001_ha: our hba card information | |
| * @ccb: the ccb which attached to sata task | |
| */ | |
| static int pm8001_task_prep_ata(struct pm8001_hba_info *pm8001_ha, | |
| struct pm8001_ccb_info *ccb) | |
| { | |
| return PM8001_CHIP_DISP->sata_req(pm8001_ha, ccb); | |
| } | |
| /** | |
| * pm8001_task_prep_ssp_tm - the dispatcher function, prepare task management data | |
| * @pm8001_ha: our hba card information | |
| * @ccb: the ccb which attached to TM | |
| * @tmf: the task management IU | |
| */ | |
| static int pm8001_task_prep_ssp_tm(struct pm8001_hba_info *pm8001_ha, | |
| struct pm8001_ccb_info *ccb, struct pm8001_tmf_task *tmf) | |
| { | |
| return PM8001_CHIP_DISP->ssp_tm_req(pm8001_ha, ccb, tmf); | |
| } | |
| /** | |
| * pm8001_task_prep_ssp - the dispatcher function,prepare ssp data for ssp task | |
| * @pm8001_ha: our hba card information | |
| * @ccb: the ccb which attached to ssp task | |
| */ | |
| static int pm8001_task_prep_ssp(struct pm8001_hba_info *pm8001_ha, | |
| struct pm8001_ccb_info *ccb) | |
| { | |
| return PM8001_CHIP_DISP->ssp_io_req(pm8001_ha, ccb); | |
| } | |
| /* Find the local port id that's attached to this device */ | |
| static int sas_find_local_port_id(struct domain_device *dev) | |
| { | |
| struct domain_device *pdev = dev->parent; | |
| /* Directly attached device */ | |
| if (!pdev) | |
| return dev->port->id; | |
| while (pdev) { | |
| struct domain_device *pdev_p = pdev->parent; | |
| if (!pdev_p) | |
| return pdev->port->id; | |
| pdev = pdev->parent; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * pm8001_task_exec - queue the task(ssp, smp && ata) to the hardware. | |
| * @task: the task to be execute. | |
| * @num: if can_queue great than 1, the task can be queued up. for SMP task, | |
| * we always execute one one time. | |
| * @gfp_flags: gfp_flags. | |
| * @is_tmf: if it is task management task. | |
| * @tmf: the task management IU | |
| */ | |
| #define DEV_IS_GONE(pm8001_dev) \ | |
| ((!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED))) | |
| static int pm8001_task_exec(struct sas_task *task, | |
| gfp_t gfp_flags, int is_tmf, struct pm8001_tmf_task *tmf) | |
| { | |
| struct domain_device *dev = task->dev; | |
| struct pm8001_hba_info *pm8001_ha; | |
| struct pm8001_device *pm8001_dev; | |
| struct pm8001_port *port = NULL; | |
| struct sas_task *t = task; | |
| struct pm8001_ccb_info *ccb; | |
| u32 tag = 0xdeadbeef, rc, n_elem = 0; | |
| unsigned long flags = 0; | |
| if (!dev->port) { | |
| struct task_status_struct *tsm = &t->task_status; | |
| tsm->resp = SAS_TASK_UNDELIVERED; | |
| tsm->stat = SAS_PHY_DOWN; | |
| if (dev->dev_type != SAS_SATA_DEV) | |
| t->task_done(t); | |
| return 0; | |
| } | |
| pm8001_ha = pm8001_find_ha_by_dev(task->dev); | |
| PM8001_IO_DBG(pm8001_ha, pm8001_printk("pm8001_task_exec device \n ")); | |
| spin_lock_irqsave(&pm8001_ha->lock, flags); | |
| do { | |
| dev = t->dev; | |
| pm8001_dev = dev->lldd_dev; | |
| port = &pm8001_ha->port[sas_find_local_port_id(dev)]; | |
| if (DEV_IS_GONE(pm8001_dev) || !port->port_attached) { | |
| if (sas_protocol_ata(t->task_proto)) { | |
| struct task_status_struct *ts = &t->task_status; | |
| ts->resp = SAS_TASK_UNDELIVERED; | |
| ts->stat = SAS_PHY_DOWN; | |
| spin_unlock_irqrestore(&pm8001_ha->lock, flags); | |
| t->task_done(t); | |
| spin_lock_irqsave(&pm8001_ha->lock, flags); | |
| continue; | |
| } else { | |
| struct task_status_struct *ts = &t->task_status; | |
| ts->resp = SAS_TASK_UNDELIVERED; | |
| ts->stat = SAS_PHY_DOWN; | |
| t->task_done(t); | |
| continue; | |
| } | |
| } | |
| rc = pm8001_tag_alloc(pm8001_ha, &tag); | |
| if (rc) | |
| goto err_out; | |
| ccb = &pm8001_ha->ccb_info[tag]; | |
| if (!sas_protocol_ata(t->task_proto)) { | |
| if (t->num_scatter) { | |
| n_elem = dma_map_sg(pm8001_ha->dev, | |
| t->scatter, | |
| t->num_scatter, | |
| t->data_dir); | |
| if (!n_elem) { | |
| rc = -ENOMEM; | |
| goto err_out_tag; | |
| } | |
| } | |
| } else { | |
| n_elem = t->num_scatter; | |
| } | |
| t->lldd_task = ccb; | |
| ccb->n_elem = n_elem; | |
| ccb->ccb_tag = tag; | |
| ccb->task = t; | |
| ccb->device = pm8001_dev; | |
| switch (t->task_proto) { | |
| case SAS_PROTOCOL_SMP: | |
| rc = pm8001_task_prep_smp(pm8001_ha, ccb); | |
| break; | |
| case SAS_PROTOCOL_SSP: | |
| if (is_tmf) | |
| rc = pm8001_task_prep_ssp_tm(pm8001_ha, | |
| ccb, tmf); | |
| else | |
| rc = pm8001_task_prep_ssp(pm8001_ha, ccb); | |
| break; | |
| case SAS_PROTOCOL_SATA: | |
| case SAS_PROTOCOL_STP: | |
| rc = pm8001_task_prep_ata(pm8001_ha, ccb); | |
| break; | |
| default: | |
| dev_printk(KERN_ERR, pm8001_ha->dev, | |
| "unknown sas_task proto: 0x%x\n", | |
| t->task_proto); | |
| rc = -EINVAL; | |
| break; | |
| } | |
| if (rc) { | |
| PM8001_IO_DBG(pm8001_ha, | |
| pm8001_printk("rc is %x\n", rc)); | |
| goto err_out_tag; | |
| } | |
| /* TODO: select normal or high priority */ | |
| spin_lock(&t->task_state_lock); | |
| t->task_state_flags |= SAS_TASK_AT_INITIATOR; | |
| spin_unlock(&t->task_state_lock); | |
| pm8001_dev->running_req++; | |
| } while (0); | |
| rc = 0; | |
| goto out_done; | |
| err_out_tag: | |
| pm8001_tag_free(pm8001_ha, tag); | |
| err_out: | |
| dev_printk(KERN_ERR, pm8001_ha->dev, "pm8001 exec failed[%d]!\n", rc); | |
| if (!sas_protocol_ata(t->task_proto)) | |
| if (n_elem) | |
| dma_unmap_sg(pm8001_ha->dev, t->scatter, n_elem, | |
| t->data_dir); | |
| out_done: | |
| spin_unlock_irqrestore(&pm8001_ha->lock, flags); | |
| return rc; | |
| } | |
| /** | |
| * pm8001_queue_command - register for upper layer used, all IO commands sent | |
| * to HBA are from this interface. | |
| * @task: the task to be execute. | |
| * @gfp_flags: gfp_flags | |
| */ | |
| int pm8001_queue_command(struct sas_task *task, gfp_t gfp_flags) | |
| { | |
| return pm8001_task_exec(task, gfp_flags, 0, NULL); | |
| } | |
| /** | |
| * pm8001_ccb_task_free - free the sg for ssp and smp command, free the ccb. | |
| * @pm8001_ha: our hba card information | |
| * @ccb: the ccb which attached to ssp task | |
| * @task: the task to be free. | |
| * @ccb_idx: ccb index. | |
| */ | |
| void pm8001_ccb_task_free(struct pm8001_hba_info *pm8001_ha, | |
| struct sas_task *task, struct pm8001_ccb_info *ccb, u32 ccb_idx) | |
| { | |
| if (!ccb->task) | |
| return; | |
| if (!sas_protocol_ata(task->task_proto)) | |
| if (ccb->n_elem) | |
| dma_unmap_sg(pm8001_ha->dev, task->scatter, | |
| task->num_scatter, task->data_dir); | |
| switch (task->task_proto) { | |
| case SAS_PROTOCOL_SMP: | |
| dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_resp, 1, | |
| PCI_DMA_FROMDEVICE); | |
| dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_req, 1, | |
| PCI_DMA_TODEVICE); | |
| break; | |
| case SAS_PROTOCOL_SATA: | |
| case SAS_PROTOCOL_STP: | |
| case SAS_PROTOCOL_SSP: | |
| default: | |
| /* do nothing */ | |
| break; | |
| } | |
| task->lldd_task = NULL; | |
| ccb->task = NULL; | |
| ccb->ccb_tag = 0xFFFFFFFF; | |
| ccb->open_retry = 0; | |
| pm8001_tag_free(pm8001_ha, ccb_idx); | |
| } | |
| /** | |
| * pm8001_alloc_dev - find a empty pm8001_device | |
| * @pm8001_ha: our hba card information | |
| */ | |
| static struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha) | |
| { | |
| u32 dev; | |
| for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) { | |
| if (pm8001_ha->devices[dev].dev_type == SAS_PHY_UNUSED) { | |
| pm8001_ha->devices[dev].id = dev; | |
| return &pm8001_ha->devices[dev]; | |
| } | |
| } | |
| if (dev == PM8001_MAX_DEVICES) { | |
| PM8001_FAIL_DBG(pm8001_ha, | |
| pm8001_printk("max support %d devices, ignore ..\n", | |
| PM8001_MAX_DEVICES)); | |
| } | |
| return NULL; | |
| } | |
| /** | |
| * pm8001_find_dev - find a matching pm8001_device | |
| * @pm8001_ha: our hba card information | |
| */ | |
| struct pm8001_device *pm8001_find_dev(struct pm8001_hba_info *pm8001_ha, | |
| u32 device_id) | |
| { | |
| u32 dev; | |
| for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) { | |
| if (pm8001_ha->devices[dev].device_id == device_id) | |
| return &pm8001_ha->devices[dev]; | |
| } | |
| if (dev == PM8001_MAX_DEVICES) { | |
| PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("NO MATCHING " | |
| "DEVICE FOUND !!!\n")); | |
| } | |
| return NULL; | |
| } | |
| static void pm8001_free_dev(struct pm8001_device *pm8001_dev) | |
| { | |
| u32 id = pm8001_dev->id; | |
| memset(pm8001_dev, 0, sizeof(*pm8001_dev)); | |
| pm8001_dev->id = id; | |
| pm8001_dev->dev_type = SAS_PHY_UNUSED; | |
| pm8001_dev->device_id = PM8001_MAX_DEVICES; | |
| pm8001_dev->sas_device = NULL; | |
| } | |
| /** | |
| * pm8001_dev_found_notify - libsas notify a device is found. | |
| * @dev: the device structure which sas layer used. | |
| * | |
| * when libsas find a sas domain device, it should tell the LLDD that | |
| * device is found, and then LLDD register this device to HBA firmware | |
| * by the command "OPC_INB_REG_DEV", after that the HBA will assign a | |
| * device ID(according to device's sas address) and returned it to LLDD. From | |
| * now on, we communicate with HBA FW with the device ID which HBA assigned | |
| * rather than sas address. it is the necessary step for our HBA but it is | |
| * the optional for other HBA driver. | |
| */ | |
| static int pm8001_dev_found_notify(struct domain_device *dev) | |
| { | |
| unsigned long flags = 0; | |
| int res = 0; | |
| struct pm8001_hba_info *pm8001_ha = NULL; | |
| struct domain_device *parent_dev = dev->parent; | |
| struct pm8001_device *pm8001_device; | |
| DECLARE_COMPLETION_ONSTACK(completion); | |
| u32 flag = 0; | |
| pm8001_ha = pm8001_find_ha_by_dev(dev); | |
| spin_lock_irqsave(&pm8001_ha->lock, flags); | |
| pm8001_device = pm8001_alloc_dev(pm8001_ha); | |
| if (!pm8001_device) { | |
| res = -1; | |
| goto found_out; | |
| } | |
| pm8001_device->sas_device = dev; | |
| dev->lldd_dev = pm8001_device; | |
| pm8001_device->dev_type = dev->dev_type; | |
| pm8001_device->dcompletion = &completion; | |
| if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) { | |
| int phy_id; | |
| struct ex_phy *phy; | |
| for (phy_id = 0; phy_id < parent_dev->ex_dev.num_phys; | |
| phy_id++) { | |
| phy = &parent_dev->ex_dev.ex_phy[phy_id]; | |
| if (SAS_ADDR(phy->attached_sas_addr) | |
| == SAS_ADDR(dev->sas_addr)) { | |
| pm8001_device->attached_phy = phy_id; | |
| break; | |
| } | |
| } | |
| if (phy_id == parent_dev->ex_dev.num_phys) { | |
| PM8001_FAIL_DBG(pm8001_ha, | |
| pm8001_printk("Error: no attached dev:%016llx" | |
| " at ex:%016llx.\n", SAS_ADDR(dev->sas_addr), | |
| SAS_ADDR(parent_dev->sas_addr))); | |
| res = -1; | |
| } | |
| } else { | |
| if (dev->dev_type == SAS_SATA_DEV) { | |
| pm8001_device->attached_phy = | |
| dev->rphy->identify.phy_identifier; | |
| flag = 1; /* directly sata*/ | |
| } | |
| } /*register this device to HBA*/ | |
| PM8001_DISC_DBG(pm8001_ha, pm8001_printk("Found device\n")); | |
| PM8001_CHIP_DISP->reg_dev_req(pm8001_ha, pm8001_device, flag); | |
| spin_unlock_irqrestore(&pm8001_ha->lock, flags); | |
| wait_for_completion(&completion); | |
| if (dev->dev_type == SAS_END_DEVICE) | |
| msleep(50); | |
| pm8001_ha->flags = PM8001F_RUN_TIME; | |
| return 0; | |
| found_out: | |
| spin_unlock_irqrestore(&pm8001_ha->lock, flags); | |
| return res; | |
| } | |
| int pm8001_dev_found(struct domain_device *dev) | |
| { | |
| return pm8001_dev_found_notify(dev); | |
| } | |
| void pm8001_task_done(struct sas_task *task) | |
| { | |
| if (!del_timer(&task->slow_task->timer)) | |
| return; | |
| complete(&task->slow_task->completion); | |
| } | |
| static void pm8001_tmf_timedout(unsigned long data) | |
| { | |
| struct sas_task *task = (struct sas_task *)data; | |
| task->task_state_flags |= SAS_TASK_STATE_ABORTED; | |
| complete(&task->slow_task->completion); | |
| } | |
| #define PM8001_TASK_TIMEOUT 20 | |
| /** | |
| * pm8001_exec_internal_tmf_task - execute some task management commands. | |
| * @dev: the wanted device. | |
| * @tmf: which task management wanted to be take. | |
| * @para_len: para_len. | |
| * @parameter: ssp task parameter. | |
| * | |
| * when errors or exception happened, we may want to do something, for example | |
| * abort the issued task which result in this execption, it is done by calling | |
| * this function, note it is also with the task execute interface. | |
| */ | |
| static int pm8001_exec_internal_tmf_task(struct domain_device *dev, | |
| void *parameter, u32 para_len, struct pm8001_tmf_task *tmf) | |
| { | |
| int res, retry; | |
| struct sas_task *task = NULL; | |
| struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev); | |
| struct pm8001_device *pm8001_dev = dev->lldd_dev; | |
| DECLARE_COMPLETION_ONSTACK(completion_setstate); | |
| for (retry = 0; retry < 3; retry++) { | |
| task = sas_alloc_slow_task(GFP_KERNEL); | |
| if (!task) | |
| return -ENOMEM; | |
| task->dev = dev; | |
| task->task_proto = dev->tproto; | |
| memcpy(&task->ssp_task, parameter, para_len); | |
| task->task_done = pm8001_task_done; | |
| task->slow_task->timer.data = (unsigned long)task; | |
| task->slow_task->timer.function = pm8001_tmf_timedout; | |
| task->slow_task->timer.expires = jiffies + PM8001_TASK_TIMEOUT*HZ; | |
| add_timer(&task->slow_task->timer); | |
| res = pm8001_task_exec(task, GFP_KERNEL, 1, tmf); | |
| if (res) { | |
| del_timer(&task->slow_task->timer); | |
| PM8001_FAIL_DBG(pm8001_ha, | |
| pm8001_printk("Executing internal task " | |
| "failed\n")); | |
| goto ex_err; | |
| } | |
| wait_for_completion(&task->slow_task->completion); | |
| if (pm8001_ha->chip_id != chip_8001) { | |
| pm8001_dev->setds_completion = &completion_setstate; | |
| PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha, | |
| pm8001_dev, 0x01); | |
| wait_for_completion(&completion_setstate); | |
| } | |
| res = -TMF_RESP_FUNC_FAILED; | |
| /* Even TMF timed out, return direct. */ | |
| if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) { | |
| if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) { | |
| PM8001_FAIL_DBG(pm8001_ha, | |
| pm8001_printk("TMF task[%x]timeout.\n", | |
| tmf->tmf)); | |
| goto ex_err; | |
| } | |
| } | |
| if (task->task_status.resp == SAS_TASK_COMPLETE && | |
| task->task_status.stat == SAM_STAT_GOOD) { | |
| res = TMF_RESP_FUNC_COMPLETE; | |
| break; | |
| } | |
| if (task->task_status.resp == SAS_TASK_COMPLETE && | |
| task->task_status.stat == SAS_DATA_UNDERRUN) { | |
| /* no error, but return the number of bytes of | |
| * underrun */ | |
| res = task->task_status.residual; | |
| break; | |
| } | |
| if (task->task_status.resp == SAS_TASK_COMPLETE && | |
| task->task_status.stat == SAS_DATA_OVERRUN) { | |
| PM8001_FAIL_DBG(pm8001_ha, | |
| pm8001_printk("Blocked task error.\n")); | |
| res = -EMSGSIZE; | |
| break; | |
| } else { | |
| PM8001_EH_DBG(pm8001_ha, | |
| pm8001_printk(" Task to dev %016llx response:" | |
| "0x%x status 0x%x\n", | |
| SAS_ADDR(dev->sas_addr), | |
| task->task_status.resp, | |
| task->task_status.stat)); | |
| sas_free_task(task); | |
| task = NULL; | |
| } | |
| } | |
| ex_err: | |
| BUG_ON(retry == 3 && task != NULL); | |
| sas_free_task(task); | |
| return res; | |
| } | |
| static int | |
| pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha, | |
| struct pm8001_device *pm8001_dev, struct domain_device *dev, u32 flag, | |
| u32 task_tag) | |
| { | |
| int res, retry; | |
| u32 ccb_tag; | |
| struct pm8001_ccb_info *ccb; | |
| struct sas_task *task = NULL; | |
| for (retry = 0; retry < 3; retry++) { | |
| task = sas_alloc_slow_task(GFP_KERNEL); | |
| if (!task) | |
| return -ENOMEM; | |
| task->dev = dev; | |
| task->task_proto = dev->tproto; | |
| task->task_done = pm8001_task_done; | |
| task->slow_task->timer.data = (unsigned long)task; | |
| task->slow_task->timer.function = pm8001_tmf_timedout; | |
| task->slow_task->timer.expires = jiffies + PM8001_TASK_TIMEOUT * HZ; | |
| add_timer(&task->slow_task->timer); | |
| res = pm8001_tag_alloc(pm8001_ha, &ccb_tag); | |
| if (res) | |
| return res; | |
| ccb = &pm8001_ha->ccb_info[ccb_tag]; | |
| ccb->device = pm8001_dev; | |
| ccb->ccb_tag = ccb_tag; | |
| ccb->task = task; | |
| ccb->n_elem = 0; | |
| res = PM8001_CHIP_DISP->task_abort(pm8001_ha, | |
| pm8001_dev, flag, task_tag, ccb_tag); | |
| if (res) { | |
| del_timer(&task->slow_task->timer); | |
| PM8001_FAIL_DBG(pm8001_ha, | |
| pm8001_printk("Executing internal task " | |
| "failed\n")); | |
| goto ex_err; | |
| } | |
| wait_for_completion(&task->slow_task->completion); | |
| res = TMF_RESP_FUNC_FAILED; | |
| /* Even TMF timed out, return direct. */ | |
| if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) { | |
| if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) { | |
| PM8001_FAIL_DBG(pm8001_ha, | |
| pm8001_printk("TMF task timeout.\n")); | |
| goto ex_err; | |
| } | |
| } | |
| if (task->task_status.resp == SAS_TASK_COMPLETE && | |
| task->task_status.stat == SAM_STAT_GOOD) { | |
| res = TMF_RESP_FUNC_COMPLETE; | |
| break; | |
| } else { | |
| PM8001_EH_DBG(pm8001_ha, | |
| pm8001_printk(" Task to dev %016llx response: " | |
| "0x%x status 0x%x\n", | |
| SAS_ADDR(dev->sas_addr), | |
| task->task_status.resp, | |
| task->task_status.stat)); | |
| sas_free_task(task); | |
| task = NULL; | |
| } | |
| } | |
| ex_err: | |
| BUG_ON(retry == 3 && task != NULL); | |
| sas_free_task(task); | |
| return res; | |
| } | |
| /** | |
| * pm8001_dev_gone_notify - see the comments for "pm8001_dev_found_notify" | |
| * @dev: the device structure which sas layer used. | |
| */ | |
| static void pm8001_dev_gone_notify(struct domain_device *dev) | |
| { | |
| unsigned long flags = 0; | |
| struct pm8001_hba_info *pm8001_ha; | |
| struct pm8001_device *pm8001_dev = dev->lldd_dev; | |
| pm8001_ha = pm8001_find_ha_by_dev(dev); | |
| spin_lock_irqsave(&pm8001_ha->lock, flags); | |
| if (pm8001_dev) { | |
| u32 device_id = pm8001_dev->device_id; | |
| PM8001_DISC_DBG(pm8001_ha, | |
| pm8001_printk("found dev[%d:%x] is gone.\n", | |
| pm8001_dev->device_id, pm8001_dev->dev_type)); | |
| if (pm8001_dev->running_req) { | |
| spin_unlock_irqrestore(&pm8001_ha->lock, flags); | |
| pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev , | |
| dev, 1, 0); | |
| spin_lock_irqsave(&pm8001_ha->lock, flags); | |
| } | |
| PM8001_CHIP_DISP->dereg_dev_req(pm8001_ha, device_id); | |
| pm8001_free_dev(pm8001_dev); | |
| } else { | |
| PM8001_DISC_DBG(pm8001_ha, | |
| pm8001_printk("Found dev has gone.\n")); | |
| } | |
| dev->lldd_dev = NULL; | |
| spin_unlock_irqrestore(&pm8001_ha->lock, flags); | |
| } | |
| void pm8001_dev_gone(struct domain_device *dev) | |
| { | |
| pm8001_dev_gone_notify(dev); | |
| } | |
| static int pm8001_issue_ssp_tmf(struct domain_device *dev, | |
| u8 *lun, struct pm8001_tmf_task *tmf) | |
| { | |
| struct sas_ssp_task ssp_task; | |
| if (!(dev->tproto & SAS_PROTOCOL_SSP)) | |
| return TMF_RESP_FUNC_ESUPP; | |
| strncpy((u8 *)&ssp_task.LUN, lun, 8); | |
| return pm8001_exec_internal_tmf_task(dev, &ssp_task, sizeof(ssp_task), | |
| tmf); | |
| } | |
| /* retry commands by ha, by task and/or by device */ | |
| void pm8001_open_reject_retry( | |
| struct pm8001_hba_info *pm8001_ha, | |
| struct sas_task *task_to_close, | |
| struct pm8001_device *device_to_close) | |
| { | |
| int i; | |
| unsigned long flags; | |
| if (pm8001_ha == NULL) | |
| return; | |
| spin_lock_irqsave(&pm8001_ha->lock, flags); | |
| for (i = 0; i < PM8001_MAX_CCB; i++) { | |
| struct sas_task *task; | |
| struct task_status_struct *ts; | |
| struct pm8001_device *pm8001_dev; | |
| unsigned long flags1; | |
| u32 tag; | |
| struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[i]; | |
| pm8001_dev = ccb->device; | |
| if (!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED)) | |
| continue; | |
| if (!device_to_close) { | |
| uintptr_t d = (uintptr_t)pm8001_dev | |
| - (uintptr_t)&pm8001_ha->devices; | |
| if (((d % sizeof(*pm8001_dev)) != 0) | |
| || ((d / sizeof(*pm8001_dev)) >= PM8001_MAX_DEVICES)) | |
| continue; | |
| } else if (pm8001_dev != device_to_close) | |
| continue; | |
| tag = ccb->ccb_tag; | |
| if (!tag || (tag == 0xFFFFFFFF)) | |
| continue; | |
| task = ccb->task; | |
| if (!task || !task->task_done) | |
| continue; | |
| if (task_to_close && (task != task_to_close)) | |
| continue; | |
| ts = &task->task_status; | |
| ts->resp = SAS_TASK_COMPLETE; | |
| /* Force the midlayer to retry */ | |
| ts->stat = SAS_OPEN_REJECT; | |
| ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; | |
| if (pm8001_dev) | |
| pm8001_dev->running_req--; | |
| spin_lock_irqsave(&task->task_state_lock, flags1); | |
| task->task_state_flags &= ~SAS_TASK_STATE_PENDING; | |
| task->task_state_flags &= ~SAS_TASK_AT_INITIATOR; | |
| task->task_state_flags |= SAS_TASK_STATE_DONE; | |
| if (unlikely((task->task_state_flags | |
| & SAS_TASK_STATE_ABORTED))) { | |
| spin_unlock_irqrestore(&task->task_state_lock, | |
| flags1); | |
| pm8001_ccb_task_free(pm8001_ha, task, ccb, tag); | |
| } else { | |
| spin_unlock_irqrestore(&task->task_state_lock, | |
| flags1); | |
| pm8001_ccb_task_free(pm8001_ha, task, ccb, tag); | |
| mb();/* in order to force CPU ordering */ | |
| spin_unlock_irqrestore(&pm8001_ha->lock, flags); | |
| task->task_done(task); | |
| spin_lock_irqsave(&pm8001_ha->lock, flags); | |
| } | |
| } | |
| spin_unlock_irqrestore(&pm8001_ha->lock, flags); | |
| } | |
| /** | |
| * Standard mandates link reset for ATA (type 0) and hard reset for | |
| * SSP (type 1) , only for RECOVERY | |
| */ | |
| int pm8001_I_T_nexus_reset(struct domain_device *dev) | |
| { | |
| int rc = TMF_RESP_FUNC_FAILED; | |
| struct pm8001_device *pm8001_dev; | |
| struct pm8001_hba_info *pm8001_ha; | |
| struct sas_phy *phy; | |
| if (!dev || !dev->lldd_dev) | |
| return -ENODEV; | |
| pm8001_dev = dev->lldd_dev; | |
| pm8001_ha = pm8001_find_ha_by_dev(dev); | |
| phy = sas_get_local_phy(dev); | |
| if (dev_is_sata(dev)) { | |
| if (scsi_is_sas_phy_local(phy)) { | |
| rc = 0; | |
| goto out; | |
| } | |
| rc = sas_phy_reset(phy, 1); | |
| if (rc) { | |
| PM8001_EH_DBG(pm8001_ha, | |
| pm8001_printk("phy reset failed for device %x\n" | |
| "with rc %d\n", pm8001_dev->device_id, rc)); | |
| rc = TMF_RESP_FUNC_FAILED; | |
| goto out; | |
| } | |
| msleep(2000); | |
| rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev , | |
| dev, 1, 0); | |
| if (rc) { | |
| PM8001_EH_DBG(pm8001_ha, | |
| pm8001_printk("task abort failed %x\n" | |
| "with rc %d\n", pm8001_dev->device_id, rc)); | |
| rc = TMF_RESP_FUNC_FAILED; | |
| } | |
| } else { | |
| rc = sas_phy_reset(phy, 1); | |
| msleep(2000); | |
| } | |
| PM8001_EH_DBG(pm8001_ha, pm8001_printk(" for device[%x]:rc=%d\n", | |
| pm8001_dev->device_id, rc)); | |
| out: | |
| sas_put_local_phy(phy); | |
| return rc; | |
| } | |
| /* | |
| * This function handle the IT_NEXUS_XXX event or completion | |
| * status code for SSP/SATA/SMP I/O request. | |
| */ | |
| int pm8001_I_T_nexus_event_handler(struct domain_device *dev) | |
| { | |
| int rc = TMF_RESP_FUNC_FAILED; | |
| struct pm8001_device *pm8001_dev; | |
| struct pm8001_hba_info *pm8001_ha; | |
| struct sas_phy *phy; | |
| u32 device_id = 0; | |
| if (!dev || !dev->lldd_dev) | |
| return -1; | |
| pm8001_dev = dev->lldd_dev; | |
| device_id = pm8001_dev->device_id; | |
| pm8001_ha = pm8001_find_ha_by_dev(dev); | |
| PM8001_EH_DBG(pm8001_ha, | |
| pm8001_printk("I_T_Nexus handler invoked !!")); | |
| phy = sas_get_local_phy(dev); | |
| if (dev_is_sata(dev)) { | |
| DECLARE_COMPLETION_ONSTACK(completion_setstate); | |
| if (scsi_is_sas_phy_local(phy)) { | |
| rc = 0; | |
| goto out; | |
| } | |
| /* send internal ssp/sata/smp abort command to FW */ | |
| rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev , | |
| dev, 1, 0); | |
| msleep(100); | |
| /* deregister the target device */ | |
| pm8001_dev_gone_notify(dev); | |
| msleep(200); | |
| /*send phy reset to hard reset target */ | |
| rc = sas_phy_reset(phy, 1); | |
| msleep(2000); | |
| pm8001_dev->setds_completion = &completion_setstate; | |
| wait_for_completion(&completion_setstate); | |
| } else { | |
| /* send internal ssp/sata/smp abort command to FW */ | |
| rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev , | |
| dev, 1, 0); | |
| msleep(100); | |
| /* deregister the target device */ | |
| pm8001_dev_gone_notify(dev); | |
| msleep(200); | |
| /*send phy reset to hard reset target */ | |
| rc = sas_phy_reset(phy, 1); | |
| msleep(2000); | |
| } | |
| PM8001_EH_DBG(pm8001_ha, pm8001_printk(" for device[%x]:rc=%d\n", | |
| pm8001_dev->device_id, rc)); | |
| out: | |
| sas_put_local_phy(phy); | |
| return rc; | |
| } | |
| /* mandatory SAM-3, the task reset the specified LUN*/ | |
| int pm8001_lu_reset(struct domain_device *dev, u8 *lun) | |
| { | |
| int rc = TMF_RESP_FUNC_FAILED; | |
| struct pm8001_tmf_task tmf_task; | |
| struct pm8001_device *pm8001_dev = dev->lldd_dev; | |
| struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev); | |
| DECLARE_COMPLETION_ONSTACK(completion_setstate); | |
| if (dev_is_sata(dev)) { | |
| struct sas_phy *phy = sas_get_local_phy(dev); | |
| rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev , | |
| dev, 1, 0); | |
| rc = sas_phy_reset(phy, 1); | |
| sas_put_local_phy(phy); | |
| pm8001_dev->setds_completion = &completion_setstate; | |
| rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha, | |
| pm8001_dev, 0x01); | |
| wait_for_completion(&completion_setstate); | |
| } else { | |
| tmf_task.tmf = TMF_LU_RESET; | |
| rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task); | |
| } | |
| /* If failed, fall-through I_T_Nexus reset */ | |
| PM8001_EH_DBG(pm8001_ha, pm8001_printk("for device[%x]:rc=%d\n", | |
| pm8001_dev->device_id, rc)); | |
| return rc; | |
| } | |
| /* optional SAM-3 */ | |
| int pm8001_query_task(struct sas_task *task) | |
| { | |
| u32 tag = 0xdeadbeef; | |
| int i = 0; | |
| struct scsi_lun lun; | |
| struct pm8001_tmf_task tmf_task; | |
| int rc = TMF_RESP_FUNC_FAILED; | |
| if (unlikely(!task || !task->lldd_task || !task->dev)) | |
| return rc; | |
| if (task->task_proto & SAS_PROTOCOL_SSP) { | |
| struct scsi_cmnd *cmnd = task->uldd_task; | |
| struct domain_device *dev = task->dev; | |
| struct pm8001_hba_info *pm8001_ha = | |
| pm8001_find_ha_by_dev(dev); | |
| int_to_scsilun(cmnd->device->lun, &lun); | |
| rc = pm8001_find_tag(task, &tag); | |
| if (rc == 0) { | |
| rc = TMF_RESP_FUNC_FAILED; | |
| return rc; | |
| } | |
| PM8001_EH_DBG(pm8001_ha, pm8001_printk("Query:[")); | |
| for (i = 0; i < 16; i++) | |
| printk(KERN_INFO "%02x ", cmnd->cmnd[i]); | |
| printk(KERN_INFO "]\n"); | |
| tmf_task.tmf = TMF_QUERY_TASK; | |
| tmf_task.tag_of_task_to_be_managed = tag; | |
| rc = pm8001_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task); | |
| switch (rc) { | |
| /* The task is still in Lun, release it then */ | |
| case TMF_RESP_FUNC_SUCC: | |
| PM8001_EH_DBG(pm8001_ha, | |
| pm8001_printk("The task is still in Lun\n")); | |
| break; | |
| /* The task is not in Lun or failed, reset the phy */ | |
| case TMF_RESP_FUNC_FAILED: | |
| case TMF_RESP_FUNC_COMPLETE: | |
| PM8001_EH_DBG(pm8001_ha, | |
| pm8001_printk("The task is not in Lun or failed," | |
| " reset the phy\n")); | |
| break; | |
| } | |
| } | |
| pm8001_printk(":rc= %d\n", rc); | |
| return rc; | |
| } | |
| /* mandatory SAM-3, still need free task/ccb info, abord the specified task */ | |
| int pm8001_abort_task(struct sas_task *task) | |
| { | |
| unsigned long flags; | |
| u32 tag = 0xdeadbeef; | |
| u32 device_id; | |
| struct domain_device *dev ; | |
| struct pm8001_hba_info *pm8001_ha = NULL; | |
| struct pm8001_ccb_info *ccb; | |
| struct scsi_lun lun; | |
| struct pm8001_device *pm8001_dev; | |
| struct pm8001_tmf_task tmf_task; | |
| int rc = TMF_RESP_FUNC_FAILED; | |
| if (unlikely(!task || !task->lldd_task || !task->dev)) | |
| return rc; | |
| spin_lock_irqsave(&task->task_state_lock, flags); | |
| if (task->task_state_flags & SAS_TASK_STATE_DONE) { | |
| spin_unlock_irqrestore(&task->task_state_lock, flags); | |
| rc = TMF_RESP_FUNC_COMPLETE; | |
| goto out; | |
| } | |
| spin_unlock_irqrestore(&task->task_state_lock, flags); | |
| if (task->task_proto & SAS_PROTOCOL_SSP) { | |
| struct scsi_cmnd *cmnd = task->uldd_task; | |
| dev = task->dev; | |
| ccb = task->lldd_task; | |
| pm8001_dev = dev->lldd_dev; | |
| pm8001_ha = pm8001_find_ha_by_dev(dev); | |
| int_to_scsilun(cmnd->device->lun, &lun); | |
| rc = pm8001_find_tag(task, &tag); | |
| if (rc == 0) { | |
| printk(KERN_INFO "No such tag in %s\n", __func__); | |
| rc = TMF_RESP_FUNC_FAILED; | |
| return rc; | |
| } | |
| device_id = pm8001_dev->device_id; | |
| PM8001_EH_DBG(pm8001_ha, | |
| pm8001_printk("abort io to deviceid= %d\n", device_id)); | |
| tmf_task.tmf = TMF_ABORT_TASK; | |
| tmf_task.tag_of_task_to_be_managed = tag; | |
| rc = pm8001_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task); | |
| pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev, | |
| pm8001_dev->sas_device, 0, tag); | |
| } else if (task->task_proto & SAS_PROTOCOL_SATA || | |
| task->task_proto & SAS_PROTOCOL_STP) { | |
| dev = task->dev; | |
| pm8001_dev = dev->lldd_dev; | |
| pm8001_ha = pm8001_find_ha_by_dev(dev); | |
| rc = pm8001_find_tag(task, &tag); | |
| if (rc == 0) { | |
| printk(KERN_INFO "No such tag in %s\n", __func__); | |
| rc = TMF_RESP_FUNC_FAILED; | |
| return rc; | |
| } | |
| rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev, | |
| pm8001_dev->sas_device, 0, tag); | |
| } else if (task->task_proto & SAS_PROTOCOL_SMP) { | |
| /* SMP */ | |
| dev = task->dev; | |
| pm8001_dev = dev->lldd_dev; | |
| pm8001_ha = pm8001_find_ha_by_dev(dev); | |
| rc = pm8001_find_tag(task, &tag); | |
| if (rc == 0) { | |
| printk(KERN_INFO "No such tag in %s\n", __func__); | |
| rc = TMF_RESP_FUNC_FAILED; | |
| return rc; | |
| } | |
| rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev, | |
| pm8001_dev->sas_device, 0, tag); | |
| } | |
| out: | |
| if (rc != TMF_RESP_FUNC_COMPLETE) | |
| pm8001_printk("rc= %d\n", rc); | |
| return rc; | |
| } | |
| int pm8001_abort_task_set(struct domain_device *dev, u8 *lun) | |
| { | |
| int rc = TMF_RESP_FUNC_FAILED; | |
| struct pm8001_tmf_task tmf_task; | |
| tmf_task.tmf = TMF_ABORT_TASK_SET; | |
| rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task); | |
| return rc; | |
| } | |
| int pm8001_clear_aca(struct domain_device *dev, u8 *lun) | |
| { | |
| int rc = TMF_RESP_FUNC_FAILED; | |
| struct pm8001_tmf_task tmf_task; | |
| tmf_task.tmf = TMF_CLEAR_ACA; | |
| rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task); | |
| return rc; | |
| } | |
| int pm8001_clear_task_set(struct domain_device *dev, u8 *lun) | |
| { | |
| int rc = TMF_RESP_FUNC_FAILED; | |
| struct pm8001_tmf_task tmf_task; | |
| struct pm8001_device *pm8001_dev = dev->lldd_dev; | |
| struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev); | |
| PM8001_EH_DBG(pm8001_ha, | |
| pm8001_printk("I_T_L_Q clear task set[%x]\n", | |
| pm8001_dev->device_id)); | |
| tmf_task.tmf = TMF_CLEAR_TASK_SET; | |
| rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task); | |
| return rc; | |
| } | |