| /* | |
| * QLogic iSCSI HBA Driver | |
| * Copyright (c) 2011-2013 QLogic Corporation | |
| * | |
| * See LICENSE.qla4xxx for copyright and licensing details. | |
| */ | |
| #include "ql4_def.h" | |
| #include "ql4_glbl.h" | |
| #include "ql4_bsg.h" | |
| static int | |
| qla4xxx_read_flash(struct bsg_job *bsg_job) | |
| { | |
| struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); | |
| struct scsi_qla_host *ha = to_qla_host(host); | |
| struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; | |
| struct iscsi_bsg_request *bsg_req = bsg_job->request; | |
| uint32_t offset = 0; | |
| uint32_t length = 0; | |
| dma_addr_t flash_dma; | |
| uint8_t *flash = NULL; | |
| int rval = -EINVAL; | |
| bsg_reply->reply_payload_rcv_len = 0; | |
| if (unlikely(pci_channel_offline(ha->pdev))) | |
| goto leave; | |
| if (ql4xxx_reset_active(ha)) { | |
| ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__); | |
| rval = -EBUSY; | |
| goto leave; | |
| } | |
| if (ha->flash_state != QLFLASH_WAITING) { | |
| ql4_printk(KERN_ERR, ha, "%s: another flash operation " | |
| "active\n", __func__); | |
| rval = -EBUSY; | |
| goto leave; | |
| } | |
| ha->flash_state = QLFLASH_READING; | |
| offset = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; | |
| length = bsg_job->reply_payload.payload_len; | |
| flash = dma_alloc_coherent(&ha->pdev->dev, length, &flash_dma, | |
| GFP_KERNEL); | |
| if (!flash) { | |
| ql4_printk(KERN_ERR, ha, "%s: dma alloc failed for flash " | |
| "data\n", __func__); | |
| rval = -ENOMEM; | |
| goto leave; | |
| } | |
| rval = qla4xxx_get_flash(ha, flash_dma, offset, length); | |
| if (rval) { | |
| ql4_printk(KERN_ERR, ha, "%s: get flash failed\n", __func__); | |
| bsg_reply->result = DID_ERROR << 16; | |
| rval = -EIO; | |
| } else { | |
| bsg_reply->reply_payload_rcv_len = | |
| sg_copy_from_buffer(bsg_job->reply_payload.sg_list, | |
| bsg_job->reply_payload.sg_cnt, | |
| flash, length); | |
| bsg_reply->result = DID_OK << 16; | |
| } | |
| bsg_job_done(bsg_job, bsg_reply->result, | |
| bsg_reply->reply_payload_rcv_len); | |
| dma_free_coherent(&ha->pdev->dev, length, flash, flash_dma); | |
| leave: | |
| ha->flash_state = QLFLASH_WAITING; | |
| return rval; | |
| } | |
| static int | |
| qla4xxx_update_flash(struct bsg_job *bsg_job) | |
| { | |
| struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); | |
| struct scsi_qla_host *ha = to_qla_host(host); | |
| struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; | |
| struct iscsi_bsg_request *bsg_req = bsg_job->request; | |
| uint32_t length = 0; | |
| uint32_t offset = 0; | |
| uint32_t options = 0; | |
| dma_addr_t flash_dma; | |
| uint8_t *flash = NULL; | |
| int rval = -EINVAL; | |
| bsg_reply->reply_payload_rcv_len = 0; | |
| if (unlikely(pci_channel_offline(ha->pdev))) | |
| goto leave; | |
| if (ql4xxx_reset_active(ha)) { | |
| ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__); | |
| rval = -EBUSY; | |
| goto leave; | |
| } | |
| if (ha->flash_state != QLFLASH_WAITING) { | |
| ql4_printk(KERN_ERR, ha, "%s: another flash operation " | |
| "active\n", __func__); | |
| rval = -EBUSY; | |
| goto leave; | |
| } | |
| ha->flash_state = QLFLASH_WRITING; | |
| length = bsg_job->request_payload.payload_len; | |
| offset = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; | |
| options = bsg_req->rqst_data.h_vendor.vendor_cmd[2]; | |
| flash = dma_alloc_coherent(&ha->pdev->dev, length, &flash_dma, | |
| GFP_KERNEL); | |
| if (!flash) { | |
| ql4_printk(KERN_ERR, ha, "%s: dma alloc failed for flash " | |
| "data\n", __func__); | |
| rval = -ENOMEM; | |
| goto leave; | |
| } | |
| sg_copy_to_buffer(bsg_job->request_payload.sg_list, | |
| bsg_job->request_payload.sg_cnt, flash, length); | |
| rval = qla4xxx_set_flash(ha, flash_dma, offset, length, options); | |
| if (rval) { | |
| ql4_printk(KERN_ERR, ha, "%s: set flash failed\n", __func__); | |
| bsg_reply->result = DID_ERROR << 16; | |
| rval = -EIO; | |
| } else | |
| bsg_reply->result = DID_OK << 16; | |
| bsg_job_done(bsg_job, bsg_reply->result, | |
| bsg_reply->reply_payload_rcv_len); | |
| dma_free_coherent(&ha->pdev->dev, length, flash, flash_dma); | |
| leave: | |
| ha->flash_state = QLFLASH_WAITING; | |
| return rval; | |
| } | |
| static int | |
| qla4xxx_get_acb_state(struct bsg_job *bsg_job) | |
| { | |
| struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); | |
| struct scsi_qla_host *ha = to_qla_host(host); | |
| struct iscsi_bsg_request *bsg_req = bsg_job->request; | |
| struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; | |
| uint32_t status[MBOX_REG_COUNT]; | |
| uint32_t acb_idx; | |
| uint32_t ip_idx; | |
| int rval = -EINVAL; | |
| bsg_reply->reply_payload_rcv_len = 0; | |
| if (unlikely(pci_channel_offline(ha->pdev))) | |
| goto leave; | |
| /* Only 4022 and above adapters are supported */ | |
| if (is_qla4010(ha)) | |
| goto leave; | |
| if (ql4xxx_reset_active(ha)) { | |
| ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__); | |
| rval = -EBUSY; | |
| goto leave; | |
| } | |
| if (bsg_job->reply_payload.payload_len < sizeof(status)) { | |
| ql4_printk(KERN_ERR, ha, "%s: invalid payload len %d\n", | |
| __func__, bsg_job->reply_payload.payload_len); | |
| rval = -EINVAL; | |
| goto leave; | |
| } | |
| acb_idx = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; | |
| ip_idx = bsg_req->rqst_data.h_vendor.vendor_cmd[2]; | |
| rval = qla4xxx_get_ip_state(ha, acb_idx, ip_idx, status); | |
| if (rval) { | |
| ql4_printk(KERN_ERR, ha, "%s: get ip state failed\n", | |
| __func__); | |
| bsg_reply->result = DID_ERROR << 16; | |
| rval = -EIO; | |
| } else { | |
| bsg_reply->reply_payload_rcv_len = | |
| sg_copy_from_buffer(bsg_job->reply_payload.sg_list, | |
| bsg_job->reply_payload.sg_cnt, | |
| status, sizeof(status)); | |
| bsg_reply->result = DID_OK << 16; | |
| } | |
| bsg_job_done(bsg_job, bsg_reply->result, | |
| bsg_reply->reply_payload_rcv_len); | |
| leave: | |
| return rval; | |
| } | |
| static int | |
| qla4xxx_read_nvram(struct bsg_job *bsg_job) | |
| { | |
| struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); | |
| struct scsi_qla_host *ha = to_qla_host(host); | |
| struct iscsi_bsg_request *bsg_req = bsg_job->request; | |
| struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; | |
| uint32_t offset = 0; | |
| uint32_t len = 0; | |
| uint32_t total_len = 0; | |
| dma_addr_t nvram_dma; | |
| uint8_t *nvram = NULL; | |
| int rval = -EINVAL; | |
| bsg_reply->reply_payload_rcv_len = 0; | |
| if (unlikely(pci_channel_offline(ha->pdev))) | |
| goto leave; | |
| /* Only 40xx adapters are supported */ | |
| if (!(is_qla4010(ha) || is_qla4022(ha) || is_qla4032(ha))) | |
| goto leave; | |
| if (ql4xxx_reset_active(ha)) { | |
| ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__); | |
| rval = -EBUSY; | |
| goto leave; | |
| } | |
| offset = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; | |
| len = bsg_job->reply_payload.payload_len; | |
| total_len = offset + len; | |
| /* total len should not be greater than max NVRAM size */ | |
| if ((is_qla4010(ha) && total_len > QL4010_NVRAM_SIZE) || | |
| ((is_qla4022(ha) || is_qla4032(ha)) && | |
| total_len > QL40X2_NVRAM_SIZE)) { | |
| ql4_printk(KERN_ERR, ha, "%s: offset+len greater than max" | |
| " nvram size, offset=%d len=%d\n", | |
| __func__, offset, len); | |
| goto leave; | |
| } | |
| nvram = dma_alloc_coherent(&ha->pdev->dev, len, &nvram_dma, | |
| GFP_KERNEL); | |
| if (!nvram) { | |
| ql4_printk(KERN_ERR, ha, "%s: dma alloc failed for nvram " | |
| "data\n", __func__); | |
| rval = -ENOMEM; | |
| goto leave; | |
| } | |
| rval = qla4xxx_get_nvram(ha, nvram_dma, offset, len); | |
| if (rval) { | |
| ql4_printk(KERN_ERR, ha, "%s: get nvram failed\n", __func__); | |
| bsg_reply->result = DID_ERROR << 16; | |
| rval = -EIO; | |
| } else { | |
| bsg_reply->reply_payload_rcv_len = | |
| sg_copy_from_buffer(bsg_job->reply_payload.sg_list, | |
| bsg_job->reply_payload.sg_cnt, | |
| nvram, len); | |
| bsg_reply->result = DID_OK << 16; | |
| } | |
| bsg_job_done(bsg_job, bsg_reply->result, | |
| bsg_reply->reply_payload_rcv_len); | |
| dma_free_coherent(&ha->pdev->dev, len, nvram, nvram_dma); | |
| leave: | |
| return rval; | |
| } | |
| static int | |
| qla4xxx_update_nvram(struct bsg_job *bsg_job) | |
| { | |
| struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); | |
| struct scsi_qla_host *ha = to_qla_host(host); | |
| struct iscsi_bsg_request *bsg_req = bsg_job->request; | |
| struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; | |
| uint32_t offset = 0; | |
| uint32_t len = 0; | |
| uint32_t total_len = 0; | |
| dma_addr_t nvram_dma; | |
| uint8_t *nvram = NULL; | |
| int rval = -EINVAL; | |
| bsg_reply->reply_payload_rcv_len = 0; | |
| if (unlikely(pci_channel_offline(ha->pdev))) | |
| goto leave; | |
| if (!(is_qla4010(ha) || is_qla4022(ha) || is_qla4032(ha))) | |
| goto leave; | |
| if (ql4xxx_reset_active(ha)) { | |
| ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__); | |
| rval = -EBUSY; | |
| goto leave; | |
| } | |
| offset = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; | |
| len = bsg_job->request_payload.payload_len; | |
| total_len = offset + len; | |
| /* total len should not be greater than max NVRAM size */ | |
| if ((is_qla4010(ha) && total_len > QL4010_NVRAM_SIZE) || | |
| ((is_qla4022(ha) || is_qla4032(ha)) && | |
| total_len > QL40X2_NVRAM_SIZE)) { | |
| ql4_printk(KERN_ERR, ha, "%s: offset+len greater than max" | |
| " nvram size, offset=%d len=%d\n", | |
| __func__, offset, len); | |
| goto leave; | |
| } | |
| nvram = dma_alloc_coherent(&ha->pdev->dev, len, &nvram_dma, | |
| GFP_KERNEL); | |
| if (!nvram) { | |
| ql4_printk(KERN_ERR, ha, "%s: dma alloc failed for flash " | |
| "data\n", __func__); | |
| rval = -ENOMEM; | |
| goto leave; | |
| } | |
| sg_copy_to_buffer(bsg_job->request_payload.sg_list, | |
| bsg_job->request_payload.sg_cnt, nvram, len); | |
| rval = qla4xxx_set_nvram(ha, nvram_dma, offset, len); | |
| if (rval) { | |
| ql4_printk(KERN_ERR, ha, "%s: set nvram failed\n", __func__); | |
| bsg_reply->result = DID_ERROR << 16; | |
| rval = -EIO; | |
| } else | |
| bsg_reply->result = DID_OK << 16; | |
| bsg_job_done(bsg_job, bsg_reply->result, | |
| bsg_reply->reply_payload_rcv_len); | |
| dma_free_coherent(&ha->pdev->dev, len, nvram, nvram_dma); | |
| leave: | |
| return rval; | |
| } | |
| static int | |
| qla4xxx_restore_defaults(struct bsg_job *bsg_job) | |
| { | |
| struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); | |
| struct scsi_qla_host *ha = to_qla_host(host); | |
| struct iscsi_bsg_request *bsg_req = bsg_job->request; | |
| struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; | |
| uint32_t region = 0; | |
| uint32_t field0 = 0; | |
| uint32_t field1 = 0; | |
| int rval = -EINVAL; | |
| bsg_reply->reply_payload_rcv_len = 0; | |
| if (unlikely(pci_channel_offline(ha->pdev))) | |
| goto leave; | |
| if (is_qla4010(ha)) | |
| goto leave; | |
| if (ql4xxx_reset_active(ha)) { | |
| ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__); | |
| rval = -EBUSY; | |
| goto leave; | |
| } | |
| region = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; | |
| field0 = bsg_req->rqst_data.h_vendor.vendor_cmd[2]; | |
| field1 = bsg_req->rqst_data.h_vendor.vendor_cmd[3]; | |
| rval = qla4xxx_restore_factory_defaults(ha, region, field0, field1); | |
| if (rval) { | |
| ql4_printk(KERN_ERR, ha, "%s: set nvram failed\n", __func__); | |
| bsg_reply->result = DID_ERROR << 16; | |
| rval = -EIO; | |
| } else | |
| bsg_reply->result = DID_OK << 16; | |
| bsg_job_done(bsg_job, bsg_reply->result, | |
| bsg_reply->reply_payload_rcv_len); | |
| leave: | |
| return rval; | |
| } | |
| static int | |
| qla4xxx_bsg_get_acb(struct bsg_job *bsg_job) | |
| { | |
| struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); | |
| struct scsi_qla_host *ha = to_qla_host(host); | |
| struct iscsi_bsg_request *bsg_req = bsg_job->request; | |
| struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; | |
| uint32_t acb_type = 0; | |
| uint32_t len = 0; | |
| dma_addr_t acb_dma; | |
| uint8_t *acb = NULL; | |
| int rval = -EINVAL; | |
| bsg_reply->reply_payload_rcv_len = 0; | |
| if (unlikely(pci_channel_offline(ha->pdev))) | |
| goto leave; | |
| /* Only 4022 and above adapters are supported */ | |
| if (is_qla4010(ha)) | |
| goto leave; | |
| if (ql4xxx_reset_active(ha)) { | |
| ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__); | |
| rval = -EBUSY; | |
| goto leave; | |
| } | |
| acb_type = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; | |
| len = bsg_job->reply_payload.payload_len; | |
| if (len < sizeof(struct addr_ctrl_blk)) { | |
| ql4_printk(KERN_ERR, ha, "%s: invalid acb len %d\n", | |
| __func__, len); | |
| rval = -EINVAL; | |
| goto leave; | |
| } | |
| acb = dma_alloc_coherent(&ha->pdev->dev, len, &acb_dma, GFP_KERNEL); | |
| if (!acb) { | |
| ql4_printk(KERN_ERR, ha, "%s: dma alloc failed for acb " | |
| "data\n", __func__); | |
| rval = -ENOMEM; | |
| goto leave; | |
| } | |
| rval = qla4xxx_get_acb(ha, acb_dma, acb_type, len); | |
| if (rval) { | |
| ql4_printk(KERN_ERR, ha, "%s: get acb failed\n", __func__); | |
| bsg_reply->result = DID_ERROR << 16; | |
| rval = -EIO; | |
| } else { | |
| bsg_reply->reply_payload_rcv_len = | |
| sg_copy_from_buffer(bsg_job->reply_payload.sg_list, | |
| bsg_job->reply_payload.sg_cnt, | |
| acb, len); | |
| bsg_reply->result = DID_OK << 16; | |
| } | |
| bsg_job_done(bsg_job, bsg_reply->result, | |
| bsg_reply->reply_payload_rcv_len); | |
| dma_free_coherent(&ha->pdev->dev, len, acb, acb_dma); | |
| leave: | |
| return rval; | |
| } | |
| static void ql4xxx_execute_diag_cmd(struct bsg_job *bsg_job) | |
| { | |
| struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); | |
| struct scsi_qla_host *ha = to_qla_host(host); | |
| struct iscsi_bsg_request *bsg_req = bsg_job->request; | |
| struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; | |
| uint8_t *rsp_ptr = NULL; | |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; | |
| uint32_t mbox_sts[MBOX_REG_COUNT]; | |
| int status = QLA_ERROR; | |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: in\n", __func__)); | |
| if (test_bit(DPC_RESET_HA, &ha->dpc_flags)) { | |
| ql4_printk(KERN_INFO, ha, "%s: Adapter reset in progress. Invalid Request\n", | |
| __func__); | |
| bsg_reply->result = DID_ERROR << 16; | |
| goto exit_diag_mem_test; | |
| } | |
| bsg_reply->reply_payload_rcv_len = 0; | |
| memcpy(mbox_cmd, &bsg_req->rqst_data.h_vendor.vendor_cmd[1], | |
| sizeof(uint32_t) * MBOX_REG_COUNT); | |
| DEBUG2(ql4_printk(KERN_INFO, ha, | |
| "%s: mbox_cmd: %08X %08X %08X %08X %08X %08X %08X %08X\n", | |
| __func__, mbox_cmd[0], mbox_cmd[1], mbox_cmd[2], | |
| mbox_cmd[3], mbox_cmd[4], mbox_cmd[5], mbox_cmd[6], | |
| mbox_cmd[7])); | |
| status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 8, &mbox_cmd[0], | |
| &mbox_sts[0]); | |
| DEBUG2(ql4_printk(KERN_INFO, ha, | |
| "%s: mbox_sts: %08X %08X %08X %08X %08X %08X %08X %08X\n", | |
| __func__, mbox_sts[0], mbox_sts[1], mbox_sts[2], | |
| mbox_sts[3], mbox_sts[4], mbox_sts[5], mbox_sts[6], | |
| mbox_sts[7])); | |
| if (status == QLA_SUCCESS) | |
| bsg_reply->result = DID_OK << 16; | |
| else | |
| bsg_reply->result = DID_ERROR << 16; | |
| /* Send mbox_sts to application */ | |
| bsg_job->reply_len = sizeof(struct iscsi_bsg_reply) + sizeof(mbox_sts); | |
| rsp_ptr = ((uint8_t *)bsg_reply) + sizeof(struct iscsi_bsg_reply); | |
| memcpy(rsp_ptr, mbox_sts, sizeof(mbox_sts)); | |
| exit_diag_mem_test: | |
| DEBUG2(ql4_printk(KERN_INFO, ha, | |
| "%s: bsg_reply->result = x%x, status = %s\n", | |
| __func__, bsg_reply->result, STATUS(status))); | |
| bsg_job_done(bsg_job, bsg_reply->result, | |
| bsg_reply->reply_payload_rcv_len); | |
| } | |
| static int qla4_83xx_wait_for_loopback_config_comp(struct scsi_qla_host *ha, | |
| int wait_for_link) | |
| { | |
| int status = QLA_SUCCESS; | |
| if (!wait_for_completion_timeout(&ha->idc_comp, (IDC_COMP_TOV * HZ))) { | |
| ql4_printk(KERN_INFO, ha, "%s: IDC Complete notification not received, Waiting for another %d timeout", | |
| __func__, ha->idc_extend_tmo); | |
| if (ha->idc_extend_tmo) { | |
| if (!wait_for_completion_timeout(&ha->idc_comp, | |
| (ha->idc_extend_tmo * HZ))) { | |
| ha->notify_idc_comp = 0; | |
| ha->notify_link_up_comp = 0; | |
| ql4_printk(KERN_WARNING, ha, "%s: Aborting: IDC Complete notification not received", | |
| __func__); | |
| status = QLA_ERROR; | |
| goto exit_wait; | |
| } else { | |
| DEBUG2(ql4_printk(KERN_INFO, ha, | |
| "%s: IDC Complete notification received\n", | |
| __func__)); | |
| } | |
| } | |
| } else { | |
| DEBUG2(ql4_printk(KERN_INFO, ha, | |
| "%s: IDC Complete notification received\n", | |
| __func__)); | |
| } | |
| ha->notify_idc_comp = 0; | |
| if (wait_for_link) { | |
| if (!wait_for_completion_timeout(&ha->link_up_comp, | |
| (IDC_COMP_TOV * HZ))) { | |
| ha->notify_link_up_comp = 0; | |
| ql4_printk(KERN_WARNING, ha, "%s: Aborting: LINK UP notification not received", | |
| __func__); | |
| status = QLA_ERROR; | |
| goto exit_wait; | |
| } else { | |
| DEBUG2(ql4_printk(KERN_INFO, ha, | |
| "%s: LINK UP notification received\n", | |
| __func__)); | |
| } | |
| ha->notify_link_up_comp = 0; | |
| } | |
| exit_wait: | |
| return status; | |
| } | |
| static int qla4_83xx_pre_loopback_config(struct scsi_qla_host *ha, | |
| uint32_t *mbox_cmd) | |
| { | |
| uint32_t config = 0; | |
| int status = QLA_SUCCESS; | |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: in\n", __func__)); | |
| status = qla4_83xx_get_port_config(ha, &config); | |
| if (status != QLA_SUCCESS) | |
| goto exit_pre_loopback_config; | |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Default port config=%08X\n", | |
| __func__, config)); | |
| if ((config & ENABLE_INTERNAL_LOOPBACK) || | |
| (config & ENABLE_EXTERNAL_LOOPBACK)) { | |
| ql4_printk(KERN_INFO, ha, "%s: Loopback diagnostics already in progress. Invalid request\n", | |
| __func__); | |
| goto exit_pre_loopback_config; | |
| } | |
| if (mbox_cmd[1] == QL_DIAG_CMD_TEST_INT_LOOPBACK) | |
| config |= ENABLE_INTERNAL_LOOPBACK; | |
| if (mbox_cmd[1] == QL_DIAG_CMD_TEST_EXT_LOOPBACK) | |
| config |= ENABLE_EXTERNAL_LOOPBACK; | |
| config &= ~ENABLE_DCBX; | |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: New port config=%08X\n", | |
| __func__, config)); | |
| ha->notify_idc_comp = 1; | |
| ha->notify_link_up_comp = 1; | |
| /* get the link state */ | |
| qla4xxx_get_firmware_state(ha); | |
| status = qla4_83xx_set_port_config(ha, &config); | |
| if (status != QLA_SUCCESS) { | |
| ha->notify_idc_comp = 0; | |
| ha->notify_link_up_comp = 0; | |
| goto exit_pre_loopback_config; | |
| } | |
| exit_pre_loopback_config: | |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: status = %s\n", __func__, | |
| STATUS(status))); | |
| return status; | |
| } | |
| static int qla4_83xx_post_loopback_config(struct scsi_qla_host *ha, | |
| uint32_t *mbox_cmd) | |
| { | |
| int status = QLA_SUCCESS; | |
| uint32_t config = 0; | |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: in\n", __func__)); | |
| status = qla4_83xx_get_port_config(ha, &config); | |
| if (status != QLA_SUCCESS) | |
| goto exit_post_loopback_config; | |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: port config=%08X\n", __func__, | |
| config)); | |
| if (mbox_cmd[1] == QL_DIAG_CMD_TEST_INT_LOOPBACK) | |
| config &= ~ENABLE_INTERNAL_LOOPBACK; | |
| else if (mbox_cmd[1] == QL_DIAG_CMD_TEST_EXT_LOOPBACK) | |
| config &= ~ENABLE_EXTERNAL_LOOPBACK; | |
| config |= ENABLE_DCBX; | |
| DEBUG2(ql4_printk(KERN_INFO, ha, | |
| "%s: Restore default port config=%08X\n", __func__, | |
| config)); | |
| ha->notify_idc_comp = 1; | |
| if (ha->addl_fw_state & FW_ADDSTATE_LINK_UP) | |
| ha->notify_link_up_comp = 1; | |
| status = qla4_83xx_set_port_config(ha, &config); | |
| if (status != QLA_SUCCESS) { | |
| ql4_printk(KERN_INFO, ha, "%s: Scheduling adapter reset\n", | |
| __func__); | |
| set_bit(DPC_RESET_HA, &ha->dpc_flags); | |
| clear_bit(AF_LOOPBACK, &ha->flags); | |
| goto exit_post_loopback_config; | |
| } | |
| exit_post_loopback_config: | |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: status = %s\n", __func__, | |
| STATUS(status))); | |
| return status; | |
| } | |
| static void qla4xxx_execute_diag_loopback_cmd(struct bsg_job *bsg_job) | |
| { | |
| struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); | |
| struct scsi_qla_host *ha = to_qla_host(host); | |
| struct iscsi_bsg_request *bsg_req = bsg_job->request; | |
| struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; | |
| uint8_t *rsp_ptr = NULL; | |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; | |
| uint32_t mbox_sts[MBOX_REG_COUNT]; | |
| int wait_for_link = 1; | |
| int status = QLA_ERROR; | |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: in\n", __func__)); | |
| bsg_reply->reply_payload_rcv_len = 0; | |
| if (test_bit(AF_LOOPBACK, &ha->flags)) { | |
| ql4_printk(KERN_INFO, ha, "%s: Loopback Diagnostics already in progress. Invalid Request\n", | |
| __func__); | |
| bsg_reply->result = DID_ERROR << 16; | |
| goto exit_loopback_cmd; | |
| } | |
| if (test_bit(DPC_RESET_HA, &ha->dpc_flags)) { | |
| ql4_printk(KERN_INFO, ha, "%s: Adapter reset in progress. Invalid Request\n", | |
| __func__); | |
| bsg_reply->result = DID_ERROR << 16; | |
| goto exit_loopback_cmd; | |
| } | |
| memcpy(mbox_cmd, &bsg_req->rqst_data.h_vendor.vendor_cmd[1], | |
| sizeof(uint32_t) * MBOX_REG_COUNT); | |
| if (is_qla8032(ha) || is_qla8042(ha)) { | |
| status = qla4_83xx_pre_loopback_config(ha, mbox_cmd); | |
| if (status != QLA_SUCCESS) { | |
| bsg_reply->result = DID_ERROR << 16; | |
| goto exit_loopback_cmd; | |
| } | |
| status = qla4_83xx_wait_for_loopback_config_comp(ha, | |
| wait_for_link); | |
| if (status != QLA_SUCCESS) { | |
| bsg_reply->result = DID_TIME_OUT << 16; | |
| goto restore; | |
| } | |
| } | |
| DEBUG2(ql4_printk(KERN_INFO, ha, | |
| "%s: mbox_cmd: %08X %08X %08X %08X %08X %08X %08X %08X\n", | |
| __func__, mbox_cmd[0], mbox_cmd[1], mbox_cmd[2], | |
| mbox_cmd[3], mbox_cmd[4], mbox_cmd[5], mbox_cmd[6], | |
| mbox_cmd[7])); | |
| status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 8, &mbox_cmd[0], | |
| &mbox_sts[0]); | |
| if (status == QLA_SUCCESS) | |
| bsg_reply->result = DID_OK << 16; | |
| else | |
| bsg_reply->result = DID_ERROR << 16; | |
| DEBUG2(ql4_printk(KERN_INFO, ha, | |
| "%s: mbox_sts: %08X %08X %08X %08X %08X %08X %08X %08X\n", | |
| __func__, mbox_sts[0], mbox_sts[1], mbox_sts[2], | |
| mbox_sts[3], mbox_sts[4], mbox_sts[5], mbox_sts[6], | |
| mbox_sts[7])); | |
| /* Send mbox_sts to application */ | |
| bsg_job->reply_len = sizeof(struct iscsi_bsg_reply) + sizeof(mbox_sts); | |
| rsp_ptr = ((uint8_t *)bsg_reply) + sizeof(struct iscsi_bsg_reply); | |
| memcpy(rsp_ptr, mbox_sts, sizeof(mbox_sts)); | |
| restore: | |
| if (is_qla8032(ha) || is_qla8042(ha)) { | |
| status = qla4_83xx_post_loopback_config(ha, mbox_cmd); | |
| if (status != QLA_SUCCESS) { | |
| bsg_reply->result = DID_ERROR << 16; | |
| goto exit_loopback_cmd; | |
| } | |
| /* for pre_loopback_config() wait for LINK UP only | |
| * if PHY LINK is UP */ | |
| if (!(ha->addl_fw_state & FW_ADDSTATE_LINK_UP)) | |
| wait_for_link = 0; | |
| status = qla4_83xx_wait_for_loopback_config_comp(ha, | |
| wait_for_link); | |
| if (status != QLA_SUCCESS) { | |
| bsg_reply->result = DID_TIME_OUT << 16; | |
| goto exit_loopback_cmd; | |
| } | |
| } | |
| exit_loopback_cmd: | |
| DEBUG2(ql4_printk(KERN_INFO, ha, | |
| "%s: bsg_reply->result = x%x, status = %s\n", | |
| __func__, bsg_reply->result, STATUS(status))); | |
| bsg_job_done(bsg_job, bsg_reply->result, | |
| bsg_reply->reply_payload_rcv_len); | |
| } | |
| static int qla4xxx_execute_diag_test(struct bsg_job *bsg_job) | |
| { | |
| struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); | |
| struct scsi_qla_host *ha = to_qla_host(host); | |
| struct iscsi_bsg_request *bsg_req = bsg_job->request; | |
| uint32_t diag_cmd; | |
| int rval = -EINVAL; | |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: in\n", __func__)); | |
| diag_cmd = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; | |
| if (diag_cmd == MBOX_CMD_DIAG_TEST) { | |
| switch (bsg_req->rqst_data.h_vendor.vendor_cmd[2]) { | |
| case QL_DIAG_CMD_TEST_DDR_SIZE: | |
| case QL_DIAG_CMD_TEST_DDR_RW: | |
| case QL_DIAG_CMD_TEST_ONCHIP_MEM_RW: | |
| case QL_DIAG_CMD_TEST_NVRAM: | |
| case QL_DIAG_CMD_TEST_FLASH_ROM: | |
| case QL_DIAG_CMD_TEST_DMA_XFER: | |
| case QL_DIAG_CMD_SELF_DDR_RW: | |
| case QL_DIAG_CMD_SELF_ONCHIP_MEM_RW: | |
| /* Execute diag test for adapter RAM/FLASH */ | |
| ql4xxx_execute_diag_cmd(bsg_job); | |
| /* Always return success as we want to sent bsg_reply | |
| * to Application */ | |
| rval = QLA_SUCCESS; | |
| break; | |
| case QL_DIAG_CMD_TEST_INT_LOOPBACK: | |
| case QL_DIAG_CMD_TEST_EXT_LOOPBACK: | |
| /* Execute diag test for Network */ | |
| qla4xxx_execute_diag_loopback_cmd(bsg_job); | |
| /* Always return success as we want to sent bsg_reply | |
| * to Application */ | |
| rval = QLA_SUCCESS; | |
| break; | |
| default: | |
| ql4_printk(KERN_ERR, ha, "%s: Invalid diag test: 0x%x\n", | |
| __func__, | |
| bsg_req->rqst_data.h_vendor.vendor_cmd[2]); | |
| } | |
| } else if ((diag_cmd == MBOX_CMD_SET_LED_CONFIG) || | |
| (diag_cmd == MBOX_CMD_GET_LED_CONFIG)) { | |
| ql4xxx_execute_diag_cmd(bsg_job); | |
| rval = QLA_SUCCESS; | |
| } else { | |
| ql4_printk(KERN_ERR, ha, "%s: Invalid diag cmd: 0x%x\n", | |
| __func__, diag_cmd); | |
| } | |
| return rval; | |
| } | |
| /** | |
| * qla4xxx_process_vendor_specific - handle vendor specific bsg request | |
| * @job: iscsi_bsg_job to handle | |
| **/ | |
| int qla4xxx_process_vendor_specific(struct bsg_job *bsg_job) | |
| { | |
| struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; | |
| struct iscsi_bsg_request *bsg_req = bsg_job->request; | |
| struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); | |
| struct scsi_qla_host *ha = to_qla_host(host); | |
| switch (bsg_req->rqst_data.h_vendor.vendor_cmd[0]) { | |
| case QLISCSI_VND_READ_FLASH: | |
| return qla4xxx_read_flash(bsg_job); | |
| case QLISCSI_VND_UPDATE_FLASH: | |
| return qla4xxx_update_flash(bsg_job); | |
| case QLISCSI_VND_GET_ACB_STATE: | |
| return qla4xxx_get_acb_state(bsg_job); | |
| case QLISCSI_VND_READ_NVRAM: | |
| return qla4xxx_read_nvram(bsg_job); | |
| case QLISCSI_VND_UPDATE_NVRAM: | |
| return qla4xxx_update_nvram(bsg_job); | |
| case QLISCSI_VND_RESTORE_DEFAULTS: | |
| return qla4xxx_restore_defaults(bsg_job); | |
| case QLISCSI_VND_GET_ACB: | |
| return qla4xxx_bsg_get_acb(bsg_job); | |
| case QLISCSI_VND_DIAG_TEST: | |
| return qla4xxx_execute_diag_test(bsg_job); | |
| default: | |
| ql4_printk(KERN_ERR, ha, "%s: invalid BSG vendor command: " | |
| "0x%x\n", __func__, bsg_req->msgcode); | |
| bsg_reply->result = (DID_ERROR << 16); | |
| bsg_reply->reply_payload_rcv_len = 0; | |
| bsg_job_done(bsg_job, bsg_reply->result, | |
| bsg_reply->reply_payload_rcv_len); | |
| return -ENOSYS; | |
| } | |
| } | |
| /** | |
| * qla4xxx_bsg_request - handle bsg request from ISCSI transport | |
| * @job: iscsi_bsg_job to handle | |
| */ | |
| int qla4xxx_bsg_request(struct bsg_job *bsg_job) | |
| { | |
| struct iscsi_bsg_request *bsg_req = bsg_job->request; | |
| struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); | |
| struct scsi_qla_host *ha = to_qla_host(host); | |
| switch (bsg_req->msgcode) { | |
| case ISCSI_BSG_HST_VENDOR: | |
| return qla4xxx_process_vendor_specific(bsg_job); | |
| default: | |
| ql4_printk(KERN_ERR, ha, "%s: invalid BSG command: 0x%x\n", | |
| __func__, bsg_req->msgcode); | |
| } | |
| return -ENOSYS; | |
| } |