| /* | |
| * sd_dif.c - SCSI Data Integrity Field | |
| * | |
| * Copyright (C) 2007, 2008 Oracle Corporation | |
| * Written by: Martin K. Petersen <martin.petersen@oracle.com> | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License version | |
| * 2 as published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; see the file COPYING. If not, write to | |
| * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, | |
| * USA. | |
| * | |
| */ | |
| #include <linux/blkdev.h> | |
| #include <linux/t10-pi.h> | |
| #include <scsi/scsi.h> | |
| #include <scsi/scsi_cmnd.h> | |
| #include <scsi/scsi_dbg.h> | |
| #include <scsi/scsi_device.h> | |
| #include <scsi/scsi_driver.h> | |
| #include <scsi/scsi_eh.h> | |
| #include <scsi/scsi_host.h> | |
| #include <scsi/scsi_ioctl.h> | |
| #include <scsi/scsicam.h> | |
| #include "sd.h" | |
| /* | |
| * Configure exchange of protection information between OS and HBA. | |
| */ | |
| void sd_dif_config_host(struct scsi_disk *sdkp) | |
| { | |
| struct scsi_device *sdp = sdkp->device; | |
| struct gendisk *disk = sdkp->disk; | |
| u8 type = sdkp->protection_type; | |
| struct blk_integrity bi; | |
| int dif, dix; | |
| dif = scsi_host_dif_capable(sdp->host, type); | |
| dix = scsi_host_dix_capable(sdp->host, type); | |
| if (!dix && scsi_host_dix_capable(sdp->host, 0)) { | |
| dif = 0; dix = 1; | |
| } | |
| if (!dix) | |
| return; | |
| memset(&bi, 0, sizeof(bi)); | |
| /* Enable DMA of protection information */ | |
| if (scsi_host_get_guard(sdkp->device->host) & SHOST_DIX_GUARD_IP) { | |
| if (type == T10_PI_TYPE3_PROTECTION) | |
| bi.profile = &t10_pi_type3_ip; | |
| else | |
| bi.profile = &t10_pi_type1_ip; | |
| bi.flags |= BLK_INTEGRITY_IP_CHECKSUM; | |
| } else | |
| if (type == T10_PI_TYPE3_PROTECTION) | |
| bi.profile = &t10_pi_type3_crc; | |
| else | |
| bi.profile = &t10_pi_type1_crc; | |
| bi.tuple_size = sizeof(struct t10_pi_tuple); | |
| sd_printk(KERN_NOTICE, sdkp, | |
| "Enabling DIX %s protection\n", bi.profile->name); | |
| if (dif && type) { | |
| bi.flags |= BLK_INTEGRITY_DEVICE_CAPABLE; | |
| if (!sdkp->ATO) | |
| goto out; | |
| if (type == T10_PI_TYPE3_PROTECTION) | |
| bi.tag_size = sizeof(u16) + sizeof(u32); | |
| else | |
| bi.tag_size = sizeof(u16); | |
| sd_printk(KERN_NOTICE, sdkp, "DIF application tag size %u\n", | |
| bi.tag_size); | |
| } | |
| out: | |
| blk_integrity_register(disk, &bi); | |
| } | |
| /* | |
| * The virtual start sector is the one that was originally submitted | |
| * by the block layer. Due to partitioning, MD/DM cloning, etc. the | |
| * actual physical start sector is likely to be different. Remap | |
| * protection information to match the physical LBA. | |
| * | |
| * From a protocol perspective there's a slight difference between | |
| * Type 1 and 2. The latter uses 32-byte CDBs exclusively, and the | |
| * reference tag is seeded in the CDB. This gives us the potential to | |
| * avoid virt->phys remapping during write. However, at read time we | |
| * don't know whether the virt sector is the same as when we wrote it | |
| * (we could be reading from real disk as opposed to MD/DM device. So | |
| * we always remap Type 2 making it identical to Type 1. | |
| * | |
| * Type 3 does not have a reference tag so no remapping is required. | |
| */ | |
| void sd_dif_prepare(struct scsi_cmnd *scmd) | |
| { | |
| const int tuple_sz = sizeof(struct t10_pi_tuple); | |
| struct bio *bio; | |
| struct scsi_disk *sdkp; | |
| struct t10_pi_tuple *pi; | |
| u32 phys, virt; | |
| sdkp = scsi_disk(scmd->request->rq_disk); | |
| if (sdkp->protection_type == T10_PI_TYPE3_PROTECTION) | |
| return; | |
| phys = scsi_prot_ref_tag(scmd); | |
| __rq_for_each_bio(bio, scmd->request) { | |
| struct bio_integrity_payload *bip = bio_integrity(bio); | |
| struct bio_vec iv; | |
| struct bvec_iter iter; | |
| unsigned int j; | |
| /* Already remapped? */ | |
| if (bip->bip_flags & BIP_MAPPED_INTEGRITY) | |
| break; | |
| virt = bip_get_seed(bip) & 0xffffffff; | |
| bip_for_each_vec(iv, bip, iter) { | |
| pi = kmap_atomic(iv.bv_page) + iv.bv_offset; | |
| for (j = 0; j < iv.bv_len; j += tuple_sz, pi++) { | |
| if (be32_to_cpu(pi->ref_tag) == virt) | |
| pi->ref_tag = cpu_to_be32(phys); | |
| virt++; | |
| phys++; | |
| } | |
| kunmap_atomic(pi); | |
| } | |
| bip->bip_flags |= BIP_MAPPED_INTEGRITY; | |
| } | |
| } | |
| /* | |
| * Remap physical sector values in the reference tag to the virtual | |
| * values expected by the block layer. | |
| */ | |
| void sd_dif_complete(struct scsi_cmnd *scmd, unsigned int good_bytes) | |
| { | |
| const int tuple_sz = sizeof(struct t10_pi_tuple); | |
| struct scsi_disk *sdkp; | |
| struct bio *bio; | |
| struct t10_pi_tuple *pi; | |
| unsigned int j, intervals; | |
| u32 phys, virt; | |
| sdkp = scsi_disk(scmd->request->rq_disk); | |
| if (sdkp->protection_type == T10_PI_TYPE3_PROTECTION || good_bytes == 0) | |
| return; | |
| intervals = good_bytes / scsi_prot_interval(scmd); | |
| phys = scsi_prot_ref_tag(scmd); | |
| __rq_for_each_bio(bio, scmd->request) { | |
| struct bio_integrity_payload *bip = bio_integrity(bio); | |
| struct bio_vec iv; | |
| struct bvec_iter iter; | |
| virt = bip_get_seed(bip) & 0xffffffff; | |
| bip_for_each_vec(iv, bip, iter) { | |
| pi = kmap_atomic(iv.bv_page) + iv.bv_offset; | |
| for (j = 0; j < iv.bv_len; j += tuple_sz, pi++) { | |
| if (intervals == 0) { | |
| kunmap_atomic(pi); | |
| return; | |
| } | |
| if (be32_to_cpu(pi->ref_tag) == phys) | |
| pi->ref_tag = cpu_to_be32(virt); | |
| virt++; | |
| phys++; | |
| intervals--; | |
| } | |
| kunmap_atomic(pi); | |
| } | |
| } | |
| } | |