| /* | |
| * Virtio SCSI HBA driver | |
| * | |
| * Copyright IBM Corp. 2010 | |
| * Copyright Red Hat, Inc. 2011 | |
| * | |
| * Authors: | |
| * Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> | |
| * Paolo Bonzini <pbonzini@redhat.com> | |
| * | |
| * This work is licensed under the terms of the GNU GPL, version 2 or later. | |
| * See the COPYING file in the top-level directory. | |
| * | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/module.h> | |
| #include <linux/slab.h> | |
| #include <linux/mempool.h> | |
| #include <linux/virtio.h> | |
| #include <linux/virtio_ids.h> | |
| #include <linux/virtio_config.h> | |
| #include <linux/virtio_scsi.h> | |
| #include <linux/cpu.h> | |
| #include <linux/blkdev.h> | |
| #include <scsi/scsi_host.h> | |
| #include <scsi/scsi_device.h> | |
| #include <scsi/scsi_cmnd.h> | |
| #include <scsi/scsi_tcq.h> | |
| #include <linux/seqlock.h> | |
| #define VIRTIO_SCSI_MEMPOOL_SZ 64 | |
| #define VIRTIO_SCSI_EVENT_LEN 8 | |
| #define VIRTIO_SCSI_VQ_BASE 2 | |
| /* Command queue element */ | |
| struct virtio_scsi_cmd { | |
| struct scsi_cmnd *sc; | |
| struct completion *comp; | |
| union { | |
| struct virtio_scsi_cmd_req cmd; | |
| struct virtio_scsi_cmd_req_pi cmd_pi; | |
| struct virtio_scsi_ctrl_tmf_req tmf; | |
| struct virtio_scsi_ctrl_an_req an; | |
| } req; | |
| union { | |
| struct virtio_scsi_cmd_resp cmd; | |
| struct virtio_scsi_ctrl_tmf_resp tmf; | |
| struct virtio_scsi_ctrl_an_resp an; | |
| struct virtio_scsi_event evt; | |
| } resp; | |
| } ____cacheline_aligned_in_smp; | |
| struct virtio_scsi_event_node { | |
| struct virtio_scsi *vscsi; | |
| struct virtio_scsi_event event; | |
| struct work_struct work; | |
| }; | |
| struct virtio_scsi_vq { | |
| /* Protects vq */ | |
| spinlock_t vq_lock; | |
| struct virtqueue *vq; | |
| }; | |
| /* | |
| * Per-target queue state. | |
| * | |
| * This struct holds the data needed by the queue steering policy. When a | |
| * target is sent multiple requests, we need to drive them to the same queue so | |
| * that FIFO processing order is kept. However, if a target was idle, we can | |
| * choose a queue arbitrarily. In this case the queue is chosen according to | |
| * the current VCPU, so the driver expects the number of request queues to be | |
| * equal to the number of VCPUs. This makes it easy and fast to select the | |
| * queue, and also lets the driver optimize the IRQ affinity for the virtqueues | |
| * (each virtqueue's affinity is set to the CPU that "owns" the queue). | |
| * | |
| * tgt_seq is held to serialize reading and writing req_vq. | |
| * | |
| * Decrements of reqs are never concurrent with writes of req_vq: before the | |
| * decrement reqs will be != 0; after the decrement the virtqueue completion | |
| * routine will not use the req_vq so it can be changed by a new request. | |
| * Thus they can happen outside the tgt_seq, provided of course we make reqs | |
| * an atomic_t. | |
| */ | |
| struct virtio_scsi_target_state { | |
| seqcount_t tgt_seq; | |
| /* Count of outstanding requests. */ | |
| atomic_t reqs; | |
| /* Currently active virtqueue for requests sent to this target. */ | |
| struct virtio_scsi_vq *req_vq; | |
| }; | |
| /* Driver instance state */ | |
| struct virtio_scsi { | |
| struct virtio_device *vdev; | |
| /* Get some buffers ready for event vq */ | |
| struct virtio_scsi_event_node event_list[VIRTIO_SCSI_EVENT_LEN]; | |
| u32 num_queues; | |
| /* If the affinity hint is set for virtqueues */ | |
| bool affinity_hint_set; | |
| struct hlist_node node; | |
| struct hlist_node node_dead; | |
| /* Protected by event_vq lock */ | |
| bool stop_events; | |
| struct virtio_scsi_vq ctrl_vq; | |
| struct virtio_scsi_vq event_vq; | |
| struct virtio_scsi_vq req_vqs[]; | |
| }; | |
| static enum cpuhp_state virtioscsi_online; | |
| static struct kmem_cache *virtscsi_cmd_cache; | |
| static mempool_t *virtscsi_cmd_pool; | |
| static inline struct Scsi_Host *virtio_scsi_host(struct virtio_device *vdev) | |
| { | |
| return vdev->priv; | |
| } | |
| static void virtscsi_compute_resid(struct scsi_cmnd *sc, u32 resid) | |
| { | |
| if (!resid) | |
| return; | |
| if (!scsi_bidi_cmnd(sc)) { | |
| scsi_set_resid(sc, resid); | |
| return; | |
| } | |
| scsi_in(sc)->resid = min(resid, scsi_in(sc)->length); | |
| scsi_out(sc)->resid = resid - scsi_in(sc)->resid; | |
| } | |
| /** | |
| * virtscsi_complete_cmd - finish a scsi_cmd and invoke scsi_done | |
| * | |
| * Called with vq_lock held. | |
| */ | |
| static void virtscsi_complete_cmd(struct virtio_scsi *vscsi, void *buf) | |
| { | |
| struct virtio_scsi_cmd *cmd = buf; | |
| struct scsi_cmnd *sc = cmd->sc; | |
| struct virtio_scsi_cmd_resp *resp = &cmd->resp.cmd; | |
| struct virtio_scsi_target_state *tgt = | |
| scsi_target(sc->device)->hostdata; | |
| dev_dbg(&sc->device->sdev_gendev, | |
| "cmd %p response %u status %#02x sense_len %u\n", | |
| sc, resp->response, resp->status, resp->sense_len); | |
| sc->result = resp->status; | |
| virtscsi_compute_resid(sc, virtio32_to_cpu(vscsi->vdev, resp->resid)); | |
| switch (resp->response) { | |
| case VIRTIO_SCSI_S_OK: | |
| set_host_byte(sc, DID_OK); | |
| break; | |
| case VIRTIO_SCSI_S_OVERRUN: | |
| set_host_byte(sc, DID_ERROR); | |
| break; | |
| case VIRTIO_SCSI_S_ABORTED: | |
| set_host_byte(sc, DID_ABORT); | |
| break; | |
| case VIRTIO_SCSI_S_BAD_TARGET: | |
| set_host_byte(sc, DID_BAD_TARGET); | |
| break; | |
| case VIRTIO_SCSI_S_RESET: | |
| set_host_byte(sc, DID_RESET); | |
| break; | |
| case VIRTIO_SCSI_S_BUSY: | |
| set_host_byte(sc, DID_BUS_BUSY); | |
| break; | |
| case VIRTIO_SCSI_S_TRANSPORT_FAILURE: | |
| set_host_byte(sc, DID_TRANSPORT_DISRUPTED); | |
| break; | |
| case VIRTIO_SCSI_S_TARGET_FAILURE: | |
| set_host_byte(sc, DID_TARGET_FAILURE); | |
| break; | |
| case VIRTIO_SCSI_S_NEXUS_FAILURE: | |
| set_host_byte(sc, DID_NEXUS_FAILURE); | |
| break; | |
| default: | |
| scmd_printk(KERN_WARNING, sc, "Unknown response %d", | |
| resp->response); | |
| /* fall through */ | |
| case VIRTIO_SCSI_S_FAILURE: | |
| set_host_byte(sc, DID_ERROR); | |
| break; | |
| } | |
| WARN_ON(virtio32_to_cpu(vscsi->vdev, resp->sense_len) > | |
| VIRTIO_SCSI_SENSE_SIZE); | |
| if (sc->sense_buffer) { | |
| memcpy(sc->sense_buffer, resp->sense, | |
| min_t(u32, | |
| virtio32_to_cpu(vscsi->vdev, resp->sense_len), | |
| VIRTIO_SCSI_SENSE_SIZE)); | |
| if (resp->sense_len) | |
| set_driver_byte(sc, DRIVER_SENSE); | |
| } | |
| sc->scsi_done(sc); | |
| atomic_dec(&tgt->reqs); | |
| } | |
| static void virtscsi_vq_done(struct virtio_scsi *vscsi, | |
| struct virtio_scsi_vq *virtscsi_vq, | |
| void (*fn)(struct virtio_scsi *vscsi, void *buf)) | |
| { | |
| void *buf; | |
| unsigned int len; | |
| unsigned long flags; | |
| struct virtqueue *vq = virtscsi_vq->vq; | |
| spin_lock_irqsave(&virtscsi_vq->vq_lock, flags); | |
| do { | |
| virtqueue_disable_cb(vq); | |
| while ((buf = virtqueue_get_buf(vq, &len)) != NULL) | |
| fn(vscsi, buf); | |
| if (unlikely(virtqueue_is_broken(vq))) | |
| break; | |
| } while (!virtqueue_enable_cb(vq)); | |
| spin_unlock_irqrestore(&virtscsi_vq->vq_lock, flags); | |
| } | |
| static void virtscsi_req_done(struct virtqueue *vq) | |
| { | |
| struct Scsi_Host *sh = virtio_scsi_host(vq->vdev); | |
| struct virtio_scsi *vscsi = shost_priv(sh); | |
| int index = vq->index - VIRTIO_SCSI_VQ_BASE; | |
| struct virtio_scsi_vq *req_vq = &vscsi->req_vqs[index]; | |
| virtscsi_vq_done(vscsi, req_vq, virtscsi_complete_cmd); | |
| }; | |
| static void virtscsi_poll_requests(struct virtio_scsi *vscsi) | |
| { | |
| int i, num_vqs; | |
| num_vqs = vscsi->num_queues; | |
| for (i = 0; i < num_vqs; i++) | |
| virtscsi_vq_done(vscsi, &vscsi->req_vqs[i], | |
| virtscsi_complete_cmd); | |
| } | |
| static void virtscsi_complete_free(struct virtio_scsi *vscsi, void *buf) | |
| { | |
| struct virtio_scsi_cmd *cmd = buf; | |
| if (cmd->comp) | |
| complete(cmd->comp); | |
| } | |
| static void virtscsi_ctrl_done(struct virtqueue *vq) | |
| { | |
| struct Scsi_Host *sh = virtio_scsi_host(vq->vdev); | |
| struct virtio_scsi *vscsi = shost_priv(sh); | |
| virtscsi_vq_done(vscsi, &vscsi->ctrl_vq, virtscsi_complete_free); | |
| }; | |
| static void virtscsi_handle_event(struct work_struct *work); | |
| static int virtscsi_kick_event(struct virtio_scsi *vscsi, | |
| struct virtio_scsi_event_node *event_node) | |
| { | |
| int err; | |
| struct scatterlist sg; | |
| unsigned long flags; | |
| INIT_WORK(&event_node->work, virtscsi_handle_event); | |
| sg_init_one(&sg, &event_node->event, sizeof(struct virtio_scsi_event)); | |
| spin_lock_irqsave(&vscsi->event_vq.vq_lock, flags); | |
| err = virtqueue_add_inbuf(vscsi->event_vq.vq, &sg, 1, event_node, | |
| GFP_ATOMIC); | |
| if (!err) | |
| virtqueue_kick(vscsi->event_vq.vq); | |
| spin_unlock_irqrestore(&vscsi->event_vq.vq_lock, flags); | |
| return err; | |
| } | |
| static int virtscsi_kick_event_all(struct virtio_scsi *vscsi) | |
| { | |
| int i; | |
| for (i = 0; i < VIRTIO_SCSI_EVENT_LEN; i++) { | |
| vscsi->event_list[i].vscsi = vscsi; | |
| virtscsi_kick_event(vscsi, &vscsi->event_list[i]); | |
| } | |
| return 0; | |
| } | |
| static void virtscsi_cancel_event_work(struct virtio_scsi *vscsi) | |
| { | |
| int i; | |
| /* Stop scheduling work before calling cancel_work_sync. */ | |
| spin_lock_irq(&vscsi->event_vq.vq_lock); | |
| vscsi->stop_events = true; | |
| spin_unlock_irq(&vscsi->event_vq.vq_lock); | |
| for (i = 0; i < VIRTIO_SCSI_EVENT_LEN; i++) | |
| cancel_work_sync(&vscsi->event_list[i].work); | |
| } | |
| static void virtscsi_handle_transport_reset(struct virtio_scsi *vscsi, | |
| struct virtio_scsi_event *event) | |
| { | |
| struct scsi_device *sdev; | |
| struct Scsi_Host *shost = virtio_scsi_host(vscsi->vdev); | |
| unsigned int target = event->lun[1]; | |
| unsigned int lun = (event->lun[2] << 8) | event->lun[3]; | |
| switch (virtio32_to_cpu(vscsi->vdev, event->reason)) { | |
| case VIRTIO_SCSI_EVT_RESET_RESCAN: | |
| scsi_add_device(shost, 0, target, lun); | |
| break; | |
| case VIRTIO_SCSI_EVT_RESET_REMOVED: | |
| sdev = scsi_device_lookup(shost, 0, target, lun); | |
| if (sdev) { | |
| scsi_remove_device(sdev); | |
| scsi_device_put(sdev); | |
| } else { | |
| pr_err("SCSI device %d 0 %d %d not found\n", | |
| shost->host_no, target, lun); | |
| } | |
| break; | |
| default: | |
| pr_info("Unsupport virtio scsi event reason %x\n", event->reason); | |
| } | |
| } | |
| static void virtscsi_handle_param_change(struct virtio_scsi *vscsi, | |
| struct virtio_scsi_event *event) | |
| { | |
| struct scsi_device *sdev; | |
| struct Scsi_Host *shost = virtio_scsi_host(vscsi->vdev); | |
| unsigned int target = event->lun[1]; | |
| unsigned int lun = (event->lun[2] << 8) | event->lun[3]; | |
| u8 asc = virtio32_to_cpu(vscsi->vdev, event->reason) & 255; | |
| u8 ascq = virtio32_to_cpu(vscsi->vdev, event->reason) >> 8; | |
| sdev = scsi_device_lookup(shost, 0, target, lun); | |
| if (!sdev) { | |
| pr_err("SCSI device %d 0 %d %d not found\n", | |
| shost->host_no, target, lun); | |
| return; | |
| } | |
| /* Handle "Parameters changed", "Mode parameters changed", and | |
| "Capacity data has changed". */ | |
| if (asc == 0x2a && (ascq == 0x00 || ascq == 0x01 || ascq == 0x09)) | |
| scsi_rescan_device(&sdev->sdev_gendev); | |
| scsi_device_put(sdev); | |
| } | |
| static void virtscsi_handle_event(struct work_struct *work) | |
| { | |
| struct virtio_scsi_event_node *event_node = | |
| container_of(work, struct virtio_scsi_event_node, work); | |
| struct virtio_scsi *vscsi = event_node->vscsi; | |
| struct virtio_scsi_event *event = &event_node->event; | |
| if (event->event & | |
| cpu_to_virtio32(vscsi->vdev, VIRTIO_SCSI_T_EVENTS_MISSED)) { | |
| event->event &= ~cpu_to_virtio32(vscsi->vdev, | |
| VIRTIO_SCSI_T_EVENTS_MISSED); | |
| scsi_scan_host(virtio_scsi_host(vscsi->vdev)); | |
| } | |
| switch (virtio32_to_cpu(vscsi->vdev, event->event)) { | |
| case VIRTIO_SCSI_T_NO_EVENT: | |
| break; | |
| case VIRTIO_SCSI_T_TRANSPORT_RESET: | |
| virtscsi_handle_transport_reset(vscsi, event); | |
| break; | |
| case VIRTIO_SCSI_T_PARAM_CHANGE: | |
| virtscsi_handle_param_change(vscsi, event); | |
| break; | |
| default: | |
| pr_err("Unsupport virtio scsi event %x\n", event->event); | |
| } | |
| virtscsi_kick_event(vscsi, event_node); | |
| } | |
| static void virtscsi_complete_event(struct virtio_scsi *vscsi, void *buf) | |
| { | |
| struct virtio_scsi_event_node *event_node = buf; | |
| if (!vscsi->stop_events) | |
| queue_work(system_freezable_wq, &event_node->work); | |
| } | |
| static void virtscsi_event_done(struct virtqueue *vq) | |
| { | |
| struct Scsi_Host *sh = virtio_scsi_host(vq->vdev); | |
| struct virtio_scsi *vscsi = shost_priv(sh); | |
| virtscsi_vq_done(vscsi, &vscsi->event_vq, virtscsi_complete_event); | |
| }; | |
| /** | |
| * virtscsi_add_cmd - add a virtio_scsi_cmd to a virtqueue | |
| * @vq : the struct virtqueue we're talking about | |
| * @cmd : command structure | |
| * @req_size : size of the request buffer | |
| * @resp_size : size of the response buffer | |
| */ | |
| static int virtscsi_add_cmd(struct virtqueue *vq, | |
| struct virtio_scsi_cmd *cmd, | |
| size_t req_size, size_t resp_size) | |
| { | |
| struct scsi_cmnd *sc = cmd->sc; | |
| struct scatterlist *sgs[6], req, resp; | |
| struct sg_table *out, *in; | |
| unsigned out_num = 0, in_num = 0; | |
| out = in = NULL; | |
| if (sc && sc->sc_data_direction != DMA_NONE) { | |
| if (sc->sc_data_direction != DMA_FROM_DEVICE) | |
| out = &scsi_out(sc)->table; | |
| if (sc->sc_data_direction != DMA_TO_DEVICE) | |
| in = &scsi_in(sc)->table; | |
| } | |
| /* Request header. */ | |
| sg_init_one(&req, &cmd->req, req_size); | |
| sgs[out_num++] = &req; | |
| /* Data-out buffer. */ | |
| if (out) { | |
| /* Place WRITE protection SGLs before Data OUT payload */ | |
| if (scsi_prot_sg_count(sc)) | |
| sgs[out_num++] = scsi_prot_sglist(sc); | |
| sgs[out_num++] = out->sgl; | |
| } | |
| /* Response header. */ | |
| sg_init_one(&resp, &cmd->resp, resp_size); | |
| sgs[out_num + in_num++] = &resp; | |
| /* Data-in buffer */ | |
| if (in) { | |
| /* Place READ protection SGLs before Data IN payload */ | |
| if (scsi_prot_sg_count(sc)) | |
| sgs[out_num + in_num++] = scsi_prot_sglist(sc); | |
| sgs[out_num + in_num++] = in->sgl; | |
| } | |
| return virtqueue_add_sgs(vq, sgs, out_num, in_num, cmd, GFP_ATOMIC); | |
| } | |
| static int virtscsi_kick_cmd(struct virtio_scsi_vq *vq, | |
| struct virtio_scsi_cmd *cmd, | |
| size_t req_size, size_t resp_size) | |
| { | |
| unsigned long flags; | |
| int err; | |
| bool needs_kick = false; | |
| spin_lock_irqsave(&vq->vq_lock, flags); | |
| err = virtscsi_add_cmd(vq->vq, cmd, req_size, resp_size); | |
| if (!err) | |
| needs_kick = virtqueue_kick_prepare(vq->vq); | |
| spin_unlock_irqrestore(&vq->vq_lock, flags); | |
| if (needs_kick) | |
| virtqueue_notify(vq->vq); | |
| return err; | |
| } | |
| static void virtio_scsi_init_hdr(struct virtio_device *vdev, | |
| struct virtio_scsi_cmd_req *cmd, | |
| struct scsi_cmnd *sc) | |
| { | |
| cmd->lun[0] = 1; | |
| cmd->lun[1] = sc->device->id; | |
| cmd->lun[2] = (sc->device->lun >> 8) | 0x40; | |
| cmd->lun[3] = sc->device->lun & 0xff; | |
| cmd->tag = cpu_to_virtio64(vdev, (unsigned long)sc); | |
| cmd->task_attr = VIRTIO_SCSI_S_SIMPLE; | |
| cmd->prio = 0; | |
| cmd->crn = 0; | |
| } | |
| #ifdef CONFIG_BLK_DEV_INTEGRITY | |
| static void virtio_scsi_init_hdr_pi(struct virtio_device *vdev, | |
| struct virtio_scsi_cmd_req_pi *cmd_pi, | |
| struct scsi_cmnd *sc) | |
| { | |
| struct request *rq = sc->request; | |
| struct blk_integrity *bi; | |
| virtio_scsi_init_hdr(vdev, (struct virtio_scsi_cmd_req *)cmd_pi, sc); | |
| if (!rq || !scsi_prot_sg_count(sc)) | |
| return; | |
| bi = blk_get_integrity(rq->rq_disk); | |
| if (sc->sc_data_direction == DMA_TO_DEVICE) | |
| cmd_pi->pi_bytesout = cpu_to_virtio32(vdev, | |
| blk_rq_sectors(rq) * | |
| bi->tuple_size); | |
| else if (sc->sc_data_direction == DMA_FROM_DEVICE) | |
| cmd_pi->pi_bytesin = cpu_to_virtio32(vdev, | |
| blk_rq_sectors(rq) * | |
| bi->tuple_size); | |
| } | |
| #endif | |
| static int virtscsi_queuecommand(struct virtio_scsi *vscsi, | |
| struct virtio_scsi_vq *req_vq, | |
| struct scsi_cmnd *sc) | |
| { | |
| struct Scsi_Host *shost = virtio_scsi_host(vscsi->vdev); | |
| struct virtio_scsi_cmd *cmd = scsi_cmd_priv(sc); | |
| int req_size; | |
| BUG_ON(scsi_sg_count(sc) > shost->sg_tablesize); | |
| /* TODO: check feature bit and fail if unsupported? */ | |
| BUG_ON(sc->sc_data_direction == DMA_BIDIRECTIONAL); | |
| dev_dbg(&sc->device->sdev_gendev, | |
| "cmd %p CDB: %#02x\n", sc, sc->cmnd[0]); | |
| memset(cmd, 0, sizeof(*cmd)); | |
| cmd->sc = sc; | |
| BUG_ON(sc->cmd_len > VIRTIO_SCSI_CDB_SIZE); | |
| #ifdef CONFIG_BLK_DEV_INTEGRITY | |
| if (virtio_has_feature(vscsi->vdev, VIRTIO_SCSI_F_T10_PI)) { | |
| virtio_scsi_init_hdr_pi(vscsi->vdev, &cmd->req.cmd_pi, sc); | |
| memcpy(cmd->req.cmd_pi.cdb, sc->cmnd, sc->cmd_len); | |
| req_size = sizeof(cmd->req.cmd_pi); | |
| } else | |
| #endif | |
| { | |
| virtio_scsi_init_hdr(vscsi->vdev, &cmd->req.cmd, sc); | |
| memcpy(cmd->req.cmd.cdb, sc->cmnd, sc->cmd_len); | |
| req_size = sizeof(cmd->req.cmd); | |
| } | |
| if (virtscsi_kick_cmd(req_vq, cmd, req_size, sizeof(cmd->resp.cmd)) != 0) | |
| return SCSI_MLQUEUE_HOST_BUSY; | |
| return 0; | |
| } | |
| static int virtscsi_queuecommand_single(struct Scsi_Host *sh, | |
| struct scsi_cmnd *sc) | |
| { | |
| struct virtio_scsi *vscsi = shost_priv(sh); | |
| struct virtio_scsi_target_state *tgt = | |
| scsi_target(sc->device)->hostdata; | |
| atomic_inc(&tgt->reqs); | |
| return virtscsi_queuecommand(vscsi, &vscsi->req_vqs[0], sc); | |
| } | |
| static struct virtio_scsi_vq *virtscsi_pick_vq_mq(struct virtio_scsi *vscsi, | |
| struct scsi_cmnd *sc) | |
| { | |
| u32 tag = blk_mq_unique_tag(sc->request); | |
| u16 hwq = blk_mq_unique_tag_to_hwq(tag); | |
| return &vscsi->req_vqs[hwq]; | |
| } | |
| static struct virtio_scsi_vq *virtscsi_pick_vq(struct virtio_scsi *vscsi, | |
| struct virtio_scsi_target_state *tgt) | |
| { | |
| struct virtio_scsi_vq *vq; | |
| unsigned long flags; | |
| u32 queue_num; | |
| local_irq_save(flags); | |
| if (atomic_inc_return(&tgt->reqs) > 1) { | |
| unsigned long seq; | |
| do { | |
| seq = read_seqcount_begin(&tgt->tgt_seq); | |
| vq = tgt->req_vq; | |
| } while (read_seqcount_retry(&tgt->tgt_seq, seq)); | |
| } else { | |
| /* no writes can be concurrent because of atomic_t */ | |
| write_seqcount_begin(&tgt->tgt_seq); | |
| /* keep previous req_vq if a reader just arrived */ | |
| if (unlikely(atomic_read(&tgt->reqs) > 1)) { | |
| vq = tgt->req_vq; | |
| goto unlock; | |
| } | |
| queue_num = smp_processor_id(); | |
| while (unlikely(queue_num >= vscsi->num_queues)) | |
| queue_num -= vscsi->num_queues; | |
| tgt->req_vq = vq = &vscsi->req_vqs[queue_num]; | |
| unlock: | |
| write_seqcount_end(&tgt->tgt_seq); | |
| } | |
| local_irq_restore(flags); | |
| return vq; | |
| } | |
| static int virtscsi_queuecommand_multi(struct Scsi_Host *sh, | |
| struct scsi_cmnd *sc) | |
| { | |
| struct virtio_scsi *vscsi = shost_priv(sh); | |
| struct virtio_scsi_target_state *tgt = | |
| scsi_target(sc->device)->hostdata; | |
| struct virtio_scsi_vq *req_vq; | |
| if (shost_use_blk_mq(sh)) | |
| req_vq = virtscsi_pick_vq_mq(vscsi, sc); | |
| else | |
| req_vq = virtscsi_pick_vq(vscsi, tgt); | |
| return virtscsi_queuecommand(vscsi, req_vq, sc); | |
| } | |
| static int virtscsi_tmf(struct virtio_scsi *vscsi, struct virtio_scsi_cmd *cmd) | |
| { | |
| DECLARE_COMPLETION_ONSTACK(comp); | |
| int ret = FAILED; | |
| cmd->comp = ∁ | |
| if (virtscsi_kick_cmd(&vscsi->ctrl_vq, cmd, | |
| sizeof cmd->req.tmf, sizeof cmd->resp.tmf) < 0) | |
| goto out; | |
| wait_for_completion(&comp); | |
| if (cmd->resp.tmf.response == VIRTIO_SCSI_S_OK || | |
| cmd->resp.tmf.response == VIRTIO_SCSI_S_FUNCTION_SUCCEEDED) | |
| ret = SUCCESS; | |
| /* | |
| * The spec guarantees that all requests related to the TMF have | |
| * been completed, but the callback might not have run yet if | |
| * we're using independent interrupts (e.g. MSI). Poll the | |
| * virtqueues once. | |
| * | |
| * In the abort case, sc->scsi_done will do nothing, because | |
| * the block layer must have detected a timeout and as a result | |
| * REQ_ATOM_COMPLETE has been set. | |
| */ | |
| virtscsi_poll_requests(vscsi); | |
| out: | |
| mempool_free(cmd, virtscsi_cmd_pool); | |
| return ret; | |
| } | |
| static int virtscsi_device_reset(struct scsi_cmnd *sc) | |
| { | |
| struct virtio_scsi *vscsi = shost_priv(sc->device->host); | |
| struct virtio_scsi_cmd *cmd; | |
| sdev_printk(KERN_INFO, sc->device, "device reset\n"); | |
| cmd = mempool_alloc(virtscsi_cmd_pool, GFP_NOIO); | |
| if (!cmd) | |
| return FAILED; | |
| memset(cmd, 0, sizeof(*cmd)); | |
| cmd->sc = sc; | |
| cmd->req.tmf = (struct virtio_scsi_ctrl_tmf_req){ | |
| .type = VIRTIO_SCSI_T_TMF, | |
| .subtype = cpu_to_virtio32(vscsi->vdev, | |
| VIRTIO_SCSI_T_TMF_LOGICAL_UNIT_RESET), | |
| .lun[0] = 1, | |
| .lun[1] = sc->device->id, | |
| .lun[2] = (sc->device->lun >> 8) | 0x40, | |
| .lun[3] = sc->device->lun & 0xff, | |
| }; | |
| return virtscsi_tmf(vscsi, cmd); | |
| } | |
| /** | |
| * virtscsi_change_queue_depth() - Change a virtscsi target's queue depth | |
| * @sdev: Virtscsi target whose queue depth to change | |
| * @qdepth: New queue depth | |
| */ | |
| static int virtscsi_change_queue_depth(struct scsi_device *sdev, int qdepth) | |
| { | |
| struct Scsi_Host *shost = sdev->host; | |
| int max_depth = shost->cmd_per_lun; | |
| return scsi_change_queue_depth(sdev, min(max_depth, qdepth)); | |
| } | |
| static int virtscsi_abort(struct scsi_cmnd *sc) | |
| { | |
| struct virtio_scsi *vscsi = shost_priv(sc->device->host); | |
| struct virtio_scsi_cmd *cmd; | |
| scmd_printk(KERN_INFO, sc, "abort\n"); | |
| cmd = mempool_alloc(virtscsi_cmd_pool, GFP_NOIO); | |
| if (!cmd) | |
| return FAILED; | |
| memset(cmd, 0, sizeof(*cmd)); | |
| cmd->sc = sc; | |
| cmd->req.tmf = (struct virtio_scsi_ctrl_tmf_req){ | |
| .type = VIRTIO_SCSI_T_TMF, | |
| .subtype = VIRTIO_SCSI_T_TMF_ABORT_TASK, | |
| .lun[0] = 1, | |
| .lun[1] = sc->device->id, | |
| .lun[2] = (sc->device->lun >> 8) | 0x40, | |
| .lun[3] = sc->device->lun & 0xff, | |
| .tag = cpu_to_virtio64(vscsi->vdev, (unsigned long)sc), | |
| }; | |
| return virtscsi_tmf(vscsi, cmd); | |
| } | |
| static int virtscsi_target_alloc(struct scsi_target *starget) | |
| { | |
| struct Scsi_Host *sh = dev_to_shost(starget->dev.parent); | |
| struct virtio_scsi *vscsi = shost_priv(sh); | |
| struct virtio_scsi_target_state *tgt = | |
| kmalloc(sizeof(*tgt), GFP_KERNEL); | |
| if (!tgt) | |
| return -ENOMEM; | |
| seqcount_init(&tgt->tgt_seq); | |
| atomic_set(&tgt->reqs, 0); | |
| tgt->req_vq = &vscsi->req_vqs[0]; | |
| starget->hostdata = tgt; | |
| return 0; | |
| } | |
| static void virtscsi_target_destroy(struct scsi_target *starget) | |
| { | |
| struct virtio_scsi_target_state *tgt = starget->hostdata; | |
| kfree(tgt); | |
| } | |
| static struct scsi_host_template virtscsi_host_template_single = { | |
| .module = THIS_MODULE, | |
| .name = "Virtio SCSI HBA", | |
| .proc_name = "virtio_scsi", | |
| .this_id = -1, | |
| .cmd_size = sizeof(struct virtio_scsi_cmd), | |
| .queuecommand = virtscsi_queuecommand_single, | |
| .change_queue_depth = virtscsi_change_queue_depth, | |
| .eh_abort_handler = virtscsi_abort, | |
| .eh_device_reset_handler = virtscsi_device_reset, | |
| .can_queue = 1024, | |
| .dma_boundary = UINT_MAX, | |
| .use_clustering = ENABLE_CLUSTERING, | |
| .target_alloc = virtscsi_target_alloc, | |
| .target_destroy = virtscsi_target_destroy, | |
| .track_queue_depth = 1, | |
| }; | |
| static struct scsi_host_template virtscsi_host_template_multi = { | |
| .module = THIS_MODULE, | |
| .name = "Virtio SCSI HBA", | |
| .proc_name = "virtio_scsi", | |
| .this_id = -1, | |
| .cmd_size = sizeof(struct virtio_scsi_cmd), | |
| .queuecommand = virtscsi_queuecommand_multi, | |
| .change_queue_depth = virtscsi_change_queue_depth, | |
| .eh_abort_handler = virtscsi_abort, | |
| .eh_device_reset_handler = virtscsi_device_reset, | |
| .can_queue = 1024, | |
| .dma_boundary = UINT_MAX, | |
| .use_clustering = ENABLE_CLUSTERING, | |
| .target_alloc = virtscsi_target_alloc, | |
| .target_destroy = virtscsi_target_destroy, | |
| .track_queue_depth = 1, | |
| }; | |
| #define virtscsi_config_get(vdev, fld) \ | |
| ({ \ | |
| typeof(((struct virtio_scsi_config *)0)->fld) __val; \ | |
| virtio_cread(vdev, struct virtio_scsi_config, fld, &__val); \ | |
| __val; \ | |
| }) | |
| #define virtscsi_config_set(vdev, fld, val) \ | |
| do { \ | |
| typeof(((struct virtio_scsi_config *)0)->fld) __val = (val); \ | |
| virtio_cwrite(vdev, struct virtio_scsi_config, fld, &__val); \ | |
| } while(0) | |
| static void __virtscsi_set_affinity(struct virtio_scsi *vscsi, bool affinity) | |
| { | |
| int i; | |
| int cpu; | |
| /* In multiqueue mode, when the number of cpu is equal | |
| * to the number of request queues, we let the qeueues | |
| * to be private to one cpu by setting the affinity hint | |
| * to eliminate the contention. | |
| */ | |
| if ((vscsi->num_queues == 1 || | |
| vscsi->num_queues != num_online_cpus()) && affinity) { | |
| if (vscsi->affinity_hint_set) | |
| affinity = false; | |
| else | |
| return; | |
| } | |
| if (affinity) { | |
| i = 0; | |
| for_each_online_cpu(cpu) { | |
| virtqueue_set_affinity(vscsi->req_vqs[i].vq, cpu); | |
| i++; | |
| } | |
| vscsi->affinity_hint_set = true; | |
| } else { | |
| for (i = 0; i < vscsi->num_queues; i++) { | |
| if (!vscsi->req_vqs[i].vq) | |
| continue; | |
| virtqueue_set_affinity(vscsi->req_vqs[i].vq, -1); | |
| } | |
| vscsi->affinity_hint_set = false; | |
| } | |
| } | |
| static void virtscsi_set_affinity(struct virtio_scsi *vscsi, bool affinity) | |
| { | |
| get_online_cpus(); | |
| __virtscsi_set_affinity(vscsi, affinity); | |
| put_online_cpus(); | |
| } | |
| static int virtscsi_cpu_online(unsigned int cpu, struct hlist_node *node) | |
| { | |
| struct virtio_scsi *vscsi = hlist_entry_safe(node, struct virtio_scsi, | |
| node); | |
| __virtscsi_set_affinity(vscsi, true); | |
| return 0; | |
| } | |
| static int virtscsi_cpu_notif_add(struct virtio_scsi *vi) | |
| { | |
| int ret; | |
| ret = cpuhp_state_add_instance(virtioscsi_online, &vi->node); | |
| if (ret) | |
| return ret; | |
| ret = cpuhp_state_add_instance(CPUHP_VIRT_SCSI_DEAD, &vi->node_dead); | |
| if (ret) | |
| cpuhp_state_remove_instance(virtioscsi_online, &vi->node); | |
| return ret; | |
| } | |
| static void virtscsi_cpu_notif_remove(struct virtio_scsi *vi) | |
| { | |
| cpuhp_state_remove_instance_nocalls(virtioscsi_online, &vi->node); | |
| cpuhp_state_remove_instance_nocalls(CPUHP_VIRT_SCSI_DEAD, | |
| &vi->node_dead); | |
| } | |
| static void virtscsi_init_vq(struct virtio_scsi_vq *virtscsi_vq, | |
| struct virtqueue *vq) | |
| { | |
| spin_lock_init(&virtscsi_vq->vq_lock); | |
| virtscsi_vq->vq = vq; | |
| } | |
| static void virtscsi_remove_vqs(struct virtio_device *vdev) | |
| { | |
| struct Scsi_Host *sh = virtio_scsi_host(vdev); | |
| struct virtio_scsi *vscsi = shost_priv(sh); | |
| virtscsi_set_affinity(vscsi, false); | |
| /* Stop all the virtqueues. */ | |
| vdev->config->reset(vdev); | |
| vdev->config->del_vqs(vdev); | |
| } | |
| static int virtscsi_init(struct virtio_device *vdev, | |
| struct virtio_scsi *vscsi) | |
| { | |
| int err; | |
| u32 i; | |
| u32 num_vqs; | |
| vq_callback_t **callbacks; | |
| const char **names; | |
| struct virtqueue **vqs; | |
| num_vqs = vscsi->num_queues + VIRTIO_SCSI_VQ_BASE; | |
| vqs = kmalloc(num_vqs * sizeof(struct virtqueue *), GFP_KERNEL); | |
| callbacks = kmalloc(num_vqs * sizeof(vq_callback_t *), GFP_KERNEL); | |
| names = kmalloc(num_vqs * sizeof(char *), GFP_KERNEL); | |
| if (!callbacks || !vqs || !names) { | |
| err = -ENOMEM; | |
| goto out; | |
| } | |
| callbacks[0] = virtscsi_ctrl_done; | |
| callbacks[1] = virtscsi_event_done; | |
| names[0] = "control"; | |
| names[1] = "event"; | |
| for (i = VIRTIO_SCSI_VQ_BASE; i < num_vqs; i++) { | |
| callbacks[i] = virtscsi_req_done; | |
| names[i] = "request"; | |
| } | |
| /* Discover virtqueues and write information to configuration. */ | |
| err = vdev->config->find_vqs(vdev, num_vqs, vqs, callbacks, names); | |
| if (err) | |
| goto out; | |
| virtscsi_init_vq(&vscsi->ctrl_vq, vqs[0]); | |
| virtscsi_init_vq(&vscsi->event_vq, vqs[1]); | |
| for (i = VIRTIO_SCSI_VQ_BASE; i < num_vqs; i++) | |
| virtscsi_init_vq(&vscsi->req_vqs[i - VIRTIO_SCSI_VQ_BASE], | |
| vqs[i]); | |
| virtscsi_config_set(vdev, cdb_size, VIRTIO_SCSI_CDB_SIZE); | |
| virtscsi_config_set(vdev, sense_size, VIRTIO_SCSI_SENSE_SIZE); | |
| err = 0; | |
| out: | |
| kfree(names); | |
| kfree(callbacks); | |
| kfree(vqs); | |
| if (err) | |
| virtscsi_remove_vqs(vdev); | |
| return err; | |
| } | |
| static int virtscsi_probe(struct virtio_device *vdev) | |
| { | |
| struct Scsi_Host *shost; | |
| struct virtio_scsi *vscsi; | |
| int err; | |
| u32 sg_elems, num_targets; | |
| u32 cmd_per_lun; | |
| u32 num_queues; | |
| struct scsi_host_template *hostt; | |
| if (!vdev->config->get) { | |
| dev_err(&vdev->dev, "%s failure: config access disabled\n", | |
| __func__); | |
| return -EINVAL; | |
| } | |
| /* We need to know how many queues before we allocate. */ | |
| num_queues = virtscsi_config_get(vdev, num_queues) ? : 1; | |
| num_targets = virtscsi_config_get(vdev, max_target) + 1; | |
| if (num_queues == 1) | |
| hostt = &virtscsi_host_template_single; | |
| else | |
| hostt = &virtscsi_host_template_multi; | |
| shost = scsi_host_alloc(hostt, | |
| sizeof(*vscsi) + sizeof(vscsi->req_vqs[0]) * num_queues); | |
| if (!shost) | |
| return -ENOMEM; | |
| sg_elems = virtscsi_config_get(vdev, seg_max) ?: 1; | |
| shost->sg_tablesize = sg_elems; | |
| vscsi = shost_priv(shost); | |
| vscsi->vdev = vdev; | |
| vscsi->num_queues = num_queues; | |
| vdev->priv = shost; | |
| err = virtscsi_init(vdev, vscsi); | |
| if (err) | |
| goto virtscsi_init_failed; | |
| err = virtscsi_cpu_notif_add(vscsi); | |
| if (err) | |
| goto scsi_add_host_failed; | |
| cmd_per_lun = virtscsi_config_get(vdev, cmd_per_lun) ?: 1; | |
| shost->cmd_per_lun = min_t(u32, cmd_per_lun, shost->can_queue); | |
| shost->max_sectors = virtscsi_config_get(vdev, max_sectors) ?: 0xFFFF; | |
| /* LUNs > 256 are reported with format 1, so they go in the range | |
| * 16640-32767. | |
| */ | |
| shost->max_lun = virtscsi_config_get(vdev, max_lun) + 1 + 0x4000; | |
| shost->max_id = num_targets; | |
| shost->max_channel = 0; | |
| shost->max_cmd_len = VIRTIO_SCSI_CDB_SIZE; | |
| shost->nr_hw_queues = num_queues; | |
| #ifdef CONFIG_BLK_DEV_INTEGRITY | |
| if (virtio_has_feature(vdev, VIRTIO_SCSI_F_T10_PI)) { | |
| int host_prot; | |
| host_prot = SHOST_DIF_TYPE1_PROTECTION | SHOST_DIF_TYPE2_PROTECTION | | |
| SHOST_DIF_TYPE3_PROTECTION | SHOST_DIX_TYPE1_PROTECTION | | |
| SHOST_DIX_TYPE2_PROTECTION | SHOST_DIX_TYPE3_PROTECTION; | |
| scsi_host_set_prot(shost, host_prot); | |
| scsi_host_set_guard(shost, SHOST_DIX_GUARD_CRC); | |
| } | |
| #endif | |
| err = scsi_add_host(shost, &vdev->dev); | |
| if (err) | |
| goto scsi_add_host_failed; | |
| virtio_device_ready(vdev); | |
| if (virtio_has_feature(vdev, VIRTIO_SCSI_F_HOTPLUG)) | |
| virtscsi_kick_event_all(vscsi); | |
| scsi_scan_host(shost); | |
| return 0; | |
| scsi_add_host_failed: | |
| vdev->config->del_vqs(vdev); | |
| virtscsi_init_failed: | |
| scsi_host_put(shost); | |
| return err; | |
| } | |
| static void virtscsi_remove(struct virtio_device *vdev) | |
| { | |
| struct Scsi_Host *shost = virtio_scsi_host(vdev); | |
| struct virtio_scsi *vscsi = shost_priv(shost); | |
| if (virtio_has_feature(vdev, VIRTIO_SCSI_F_HOTPLUG)) | |
| virtscsi_cancel_event_work(vscsi); | |
| scsi_remove_host(shost); | |
| virtscsi_cpu_notif_remove(vscsi); | |
| virtscsi_remove_vqs(vdev); | |
| scsi_host_put(shost); | |
| } | |
| #ifdef CONFIG_PM_SLEEP | |
| static int virtscsi_freeze(struct virtio_device *vdev) | |
| { | |
| struct Scsi_Host *sh = virtio_scsi_host(vdev); | |
| struct virtio_scsi *vscsi = shost_priv(sh); | |
| virtscsi_cpu_notif_remove(vscsi); | |
| virtscsi_remove_vqs(vdev); | |
| return 0; | |
| } | |
| static int virtscsi_restore(struct virtio_device *vdev) | |
| { | |
| struct Scsi_Host *sh = virtio_scsi_host(vdev); | |
| struct virtio_scsi *vscsi = shost_priv(sh); | |
| int err; | |
| err = virtscsi_init(vdev, vscsi); | |
| if (err) | |
| return err; | |
| err = virtscsi_cpu_notif_add(vscsi); | |
| if (err) { | |
| vdev->config->del_vqs(vdev); | |
| return err; | |
| } | |
| virtio_device_ready(vdev); | |
| if (virtio_has_feature(vdev, VIRTIO_SCSI_F_HOTPLUG)) | |
| virtscsi_kick_event_all(vscsi); | |
| return err; | |
| } | |
| #endif | |
| static struct virtio_device_id id_table[] = { | |
| { VIRTIO_ID_SCSI, VIRTIO_DEV_ANY_ID }, | |
| { 0 }, | |
| }; | |
| static unsigned int features[] = { | |
| VIRTIO_SCSI_F_HOTPLUG, | |
| VIRTIO_SCSI_F_CHANGE, | |
| #ifdef CONFIG_BLK_DEV_INTEGRITY | |
| VIRTIO_SCSI_F_T10_PI, | |
| #endif | |
| }; | |
| static struct virtio_driver virtio_scsi_driver = { | |
| .feature_table = features, | |
| .feature_table_size = ARRAY_SIZE(features), | |
| .driver.name = KBUILD_MODNAME, | |
| .driver.owner = THIS_MODULE, | |
| .id_table = id_table, | |
| .probe = virtscsi_probe, | |
| #ifdef CONFIG_PM_SLEEP | |
| .freeze = virtscsi_freeze, | |
| .restore = virtscsi_restore, | |
| #endif | |
| .remove = virtscsi_remove, | |
| }; | |
| static int __init init(void) | |
| { | |
| int ret = -ENOMEM; | |
| virtscsi_cmd_cache = KMEM_CACHE(virtio_scsi_cmd, 0); | |
| if (!virtscsi_cmd_cache) { | |
| pr_err("kmem_cache_create() for virtscsi_cmd_cache failed\n"); | |
| goto error; | |
| } | |
| virtscsi_cmd_pool = | |
| mempool_create_slab_pool(VIRTIO_SCSI_MEMPOOL_SZ, | |
| virtscsi_cmd_cache); | |
| if (!virtscsi_cmd_pool) { | |
| pr_err("mempool_create() for virtscsi_cmd_pool failed\n"); | |
| goto error; | |
| } | |
| ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN, | |
| "scsi/virtio:online", | |
| virtscsi_cpu_online, NULL); | |
| if (ret < 0) | |
| goto error; | |
| virtioscsi_online = ret; | |
| ret = cpuhp_setup_state_multi(CPUHP_VIRT_SCSI_DEAD, "scsi/virtio:dead", | |
| NULL, virtscsi_cpu_online); | |
| if (ret) | |
| goto error; | |
| ret = register_virtio_driver(&virtio_scsi_driver); | |
| if (ret < 0) | |
| goto error; | |
| return 0; | |
| error: | |
| if (virtscsi_cmd_pool) { | |
| mempool_destroy(virtscsi_cmd_pool); | |
| virtscsi_cmd_pool = NULL; | |
| } | |
| if (virtscsi_cmd_cache) { | |
| kmem_cache_destroy(virtscsi_cmd_cache); | |
| virtscsi_cmd_cache = NULL; | |
| } | |
| if (virtioscsi_online) | |
| cpuhp_remove_multi_state(virtioscsi_online); | |
| cpuhp_remove_multi_state(CPUHP_VIRT_SCSI_DEAD); | |
| return ret; | |
| } | |
| static void __exit fini(void) | |
| { | |
| unregister_virtio_driver(&virtio_scsi_driver); | |
| cpuhp_remove_multi_state(virtioscsi_online); | |
| cpuhp_remove_multi_state(CPUHP_VIRT_SCSI_DEAD); | |
| mempool_destroy(virtscsi_cmd_pool); | |
| kmem_cache_destroy(virtscsi_cmd_cache); | |
| } | |
| module_init(init); | |
| module_exit(fini); | |
| MODULE_DEVICE_TABLE(virtio, id_table); | |
| MODULE_DESCRIPTION("Virtio SCSI HBA driver"); | |
| MODULE_LICENSE("GPL"); |