| /* | |
| * Copyright (c) 2014, The Linux foundation. All rights reserved. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License rev 2 and | |
| * only rev 2 as published by the free Software foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or fITNESS fOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| */ | |
| #include <linux/clk.h> | |
| #include <linux/err.h> | |
| #include <linux/io.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/of_platform.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/regmap.h> | |
| #include <linux/mfd/syscon.h> | |
| #include <dt-bindings/soc/qcom,gsbi.h> | |
| #define GSBI_CTRL_REG 0x0000 | |
| #define GSBI_PROTOCOL_SHIFT 4 | |
| #define MAX_GSBI 12 | |
| #define TCSR_ADM_CRCI_BASE 0x70 | |
| struct crci_config { | |
| u32 num_rows; | |
| const u32 (*array)[MAX_GSBI]; | |
| }; | |
| static const u32 crci_ipq8064[][MAX_GSBI] = { | |
| { | |
| 0x000003, 0x00000c, 0x000030, 0x0000c0, | |
| 0x000300, 0x000c00, 0x003000, 0x00c000, | |
| 0x030000, 0x0c0000, 0x300000, 0xc00000 | |
| }, | |
| { | |
| 0x000003, 0x00000c, 0x000030, 0x0000c0, | |
| 0x000300, 0x000c00, 0x003000, 0x00c000, | |
| 0x030000, 0x0c0000, 0x300000, 0xc00000 | |
| }, | |
| }; | |
| static const struct crci_config config_ipq8064 = { | |
| .num_rows = ARRAY_SIZE(crci_ipq8064), | |
| .array = crci_ipq8064, | |
| }; | |
| static const unsigned int crci_apq8064[][MAX_GSBI] = { | |
| { | |
| 0x001800, 0x006000, 0x000030, 0x0000c0, | |
| 0x000300, 0x000400, 0x000000, 0x000000, | |
| 0x000000, 0x000000, 0x000000, 0x000000 | |
| }, | |
| { | |
| 0x000000, 0x000000, 0x000000, 0x000000, | |
| 0x000000, 0x000020, 0x0000c0, 0x000000, | |
| 0x000000, 0x000000, 0x000000, 0x000000 | |
| }, | |
| }; | |
| static const struct crci_config config_apq8064 = { | |
| .num_rows = ARRAY_SIZE(crci_apq8064), | |
| .array = crci_apq8064, | |
| }; | |
| static const unsigned int crci_msm8960[][MAX_GSBI] = { | |
| { | |
| 0x000003, 0x00000c, 0x000030, 0x0000c0, | |
| 0x000300, 0x000400, 0x000000, 0x000000, | |
| 0x000000, 0x000000, 0x000000, 0x000000 | |
| }, | |
| { | |
| 0x000000, 0x000000, 0x000000, 0x000000, | |
| 0x000000, 0x000020, 0x0000c0, 0x000300, | |
| 0x001800, 0x006000, 0x000000, 0x000000 | |
| }, | |
| }; | |
| static const struct crci_config config_msm8960 = { | |
| .num_rows = ARRAY_SIZE(crci_msm8960), | |
| .array = crci_msm8960, | |
| }; | |
| static const unsigned int crci_msm8660[][MAX_GSBI] = { | |
| { /* ADM 0 - B */ | |
| 0x000003, 0x00000c, 0x000030, 0x0000c0, | |
| 0x000300, 0x000c00, 0x003000, 0x00c000, | |
| 0x030000, 0x0c0000, 0x300000, 0xc00000 | |
| }, | |
| { /* ADM 0 - B */ | |
| 0x000003, 0x00000c, 0x000030, 0x0000c0, | |
| 0x000300, 0x000c00, 0x003000, 0x00c000, | |
| 0x030000, 0x0c0000, 0x300000, 0xc00000 | |
| }, | |
| { /* ADM 1 - A */ | |
| 0x000003, 0x00000c, 0x000030, 0x0000c0, | |
| 0x000300, 0x000c00, 0x003000, 0x00c000, | |
| 0x030000, 0x0c0000, 0x300000, 0xc00000 | |
| }, | |
| { /* ADM 1 - B */ | |
| 0x000003, 0x00000c, 0x000030, 0x0000c0, | |
| 0x000300, 0x000c00, 0x003000, 0x00c000, | |
| 0x030000, 0x0c0000, 0x300000, 0xc00000 | |
| }, | |
| }; | |
| static const struct crci_config config_msm8660 = { | |
| .num_rows = ARRAY_SIZE(crci_msm8660), | |
| .array = crci_msm8660, | |
| }; | |
| struct gsbi_info { | |
| struct clk *hclk; | |
| u32 mode; | |
| u32 crci; | |
| struct regmap *tcsr; | |
| }; | |
| static const struct of_device_id tcsr_dt_match[] = { | |
| { .compatible = "qcom,tcsr-ipq8064", .data = &config_ipq8064}, | |
| { .compatible = "qcom,tcsr-apq8064", .data = &config_apq8064}, | |
| { .compatible = "qcom,tcsr-msm8960", .data = &config_msm8960}, | |
| { .compatible = "qcom,tcsr-msm8660", .data = &config_msm8660}, | |
| { }, | |
| }; | |
| static int gsbi_probe(struct platform_device *pdev) | |
| { | |
| struct device_node *node = pdev->dev.of_node; | |
| struct device_node *tcsr_node; | |
| const struct of_device_id *match; | |
| struct resource *res; | |
| void __iomem *base; | |
| struct gsbi_info *gsbi; | |
| int i; | |
| u32 mask, gsbi_num; | |
| const struct crci_config *config = NULL; | |
| gsbi = devm_kzalloc(&pdev->dev, sizeof(*gsbi), GFP_KERNEL); | |
| if (!gsbi) | |
| return -ENOMEM; | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| base = devm_ioremap_resource(&pdev->dev, res); | |
| if (IS_ERR(base)) | |
| return PTR_ERR(base); | |
| /* get the tcsr node and setup the config and regmap */ | |
| gsbi->tcsr = syscon_regmap_lookup_by_phandle(node, "syscon-tcsr"); | |
| if (!IS_ERR(gsbi->tcsr)) { | |
| tcsr_node = of_parse_phandle(node, "syscon-tcsr", 0); | |
| if (tcsr_node) { | |
| match = of_match_node(tcsr_dt_match, tcsr_node); | |
| if (match) | |
| config = match->data; | |
| else | |
| dev_warn(&pdev->dev, "no matching TCSR\n"); | |
| of_node_put(tcsr_node); | |
| } | |
| } | |
| if (of_property_read_u32(node, "cell-index", &gsbi_num)) { | |
| dev_err(&pdev->dev, "missing cell-index\n"); | |
| return -EINVAL; | |
| } | |
| if (gsbi_num < 1 || gsbi_num > MAX_GSBI) { | |
| dev_err(&pdev->dev, "invalid cell-index\n"); | |
| return -EINVAL; | |
| } | |
| if (of_property_read_u32(node, "qcom,mode", &gsbi->mode)) { | |
| dev_err(&pdev->dev, "missing mode configuration\n"); | |
| return -EINVAL; | |
| } | |
| /* not required, so default to 0 if not present */ | |
| of_property_read_u32(node, "qcom,crci", &gsbi->crci); | |
| dev_info(&pdev->dev, "GSBI port protocol: %d crci: %d\n", | |
| gsbi->mode, gsbi->crci); | |
| gsbi->hclk = devm_clk_get(&pdev->dev, "iface"); | |
| if (IS_ERR(gsbi->hclk)) | |
| return PTR_ERR(gsbi->hclk); | |
| clk_prepare_enable(gsbi->hclk); | |
| writel_relaxed((gsbi->mode << GSBI_PROTOCOL_SHIFT) | gsbi->crci, | |
| base + GSBI_CTRL_REG); | |
| /* | |
| * modify tcsr to reflect mode and ADM CRCI mux | |
| * Each gsbi contains a pair of bits, one for RX and one for TX | |
| * SPI mode requires both bits cleared, otherwise they are set | |
| */ | |
| if (config) { | |
| for (i = 0; i < config->num_rows; i++) { | |
| mask = config->array[i][gsbi_num - 1]; | |
| if (gsbi->mode == GSBI_PROT_SPI) | |
| regmap_update_bits(gsbi->tcsr, | |
| TCSR_ADM_CRCI_BASE + 4 * i, mask, 0); | |
| else | |
| regmap_update_bits(gsbi->tcsr, | |
| TCSR_ADM_CRCI_BASE + 4 * i, mask, mask); | |
| } | |
| } | |
| /* make sure the gsbi control write is not reordered */ | |
| wmb(); | |
| platform_set_drvdata(pdev, gsbi); | |
| return of_platform_populate(node, NULL, NULL, &pdev->dev); | |
| } | |
| static int gsbi_remove(struct platform_device *pdev) | |
| { | |
| struct gsbi_info *gsbi = platform_get_drvdata(pdev); | |
| clk_disable_unprepare(gsbi->hclk); | |
| return 0; | |
| } | |
| static const struct of_device_id gsbi_dt_match[] = { | |
| { .compatible = "qcom,gsbi-v1.0.0", }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(of, gsbi_dt_match); | |
| static struct platform_driver gsbi_driver = { | |
| .driver = { | |
| .name = "gsbi", | |
| .of_match_table = gsbi_dt_match, | |
| }, | |
| .probe = gsbi_probe, | |
| .remove = gsbi_remove, | |
| }; | |
| module_platform_driver(gsbi_driver); | |
| MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>"); | |
| MODULE_DESCRIPTION("QCOM GSBI driver"); | |
| MODULE_LICENSE("GPL v2"); |