| /* | |
| * Junction temperature thermal driver for Maxim Max77620. | |
| * | |
| * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved. | |
| * | |
| * Author: Laxman Dewangan <ldewangan@nvidia.com> | |
| * Mallikarjun Kasoju <mkasoju@nvidia.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms and conditions of the GNU General Public License, | |
| * version 2, as published by the Free Software Foundation. | |
| */ | |
| #include <linux/irq.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/mfd/max77620.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/regmap.h> | |
| #include <linux/slab.h> | |
| #include <linux/thermal.h> | |
| #define MAX77620_NORMAL_OPERATING_TEMP 100000 | |
| #define MAX77620_TJALARM1_TEMP 120000 | |
| #define MAX77620_TJALARM2_TEMP 140000 | |
| struct max77620_therm_info { | |
| struct device *dev; | |
| struct regmap *rmap; | |
| struct thermal_zone_device *tz_device; | |
| int irq_tjalarm1; | |
| int irq_tjalarm2; | |
| }; | |
| /** | |
| * max77620_thermal_read_temp: Read PMIC die temperatue. | |
| * @data: Device specific data. | |
| * temp: Temperature in millidegrees Celsius | |
| * | |
| * The actual temperature of PMIC die is not available from PMIC. | |
| * PMIC only tells the status if it has crossed or not the threshold level | |
| * of 120degC or 140degC. | |
| * If threshold has not been crossed then assume die temperature as 100degC | |
| * else 120degC or 140deG based on the PMIC die temp threshold status. | |
| * | |
| * Return 0 on success otherwise error number to show reason of failure. | |
| */ | |
| static int max77620_thermal_read_temp(void *data, int *temp) | |
| { | |
| struct max77620_therm_info *mtherm = data; | |
| unsigned int val; | |
| int ret; | |
| ret = regmap_read(mtherm->rmap, MAX77620_REG_STATLBT, &val); | |
| if (ret < 0) { | |
| dev_err(mtherm->dev, "Failed to read STATLBT: %d\n", ret); | |
| return ret; | |
| } | |
| if (val & MAX77620_IRQ_TJALRM2_MASK) | |
| *temp = MAX77620_TJALARM2_TEMP; | |
| else if (val & MAX77620_IRQ_TJALRM1_MASK) | |
| *temp = MAX77620_TJALARM1_TEMP; | |
| else | |
| *temp = MAX77620_NORMAL_OPERATING_TEMP; | |
| return 0; | |
| } | |
| static const struct thermal_zone_of_device_ops max77620_thermal_ops = { | |
| .get_temp = max77620_thermal_read_temp, | |
| }; | |
| static irqreturn_t max77620_thermal_irq(int irq, void *data) | |
| { | |
| struct max77620_therm_info *mtherm = data; | |
| if (irq == mtherm->irq_tjalarm1) | |
| dev_warn(mtherm->dev, "Junction Temp Alarm1(120C) occurred\n"); | |
| else if (irq == mtherm->irq_tjalarm2) | |
| dev_crit(mtherm->dev, "Junction Temp Alarm2(140C) occurred\n"); | |
| thermal_zone_device_update(mtherm->tz_device, | |
| THERMAL_EVENT_UNSPECIFIED); | |
| return IRQ_HANDLED; | |
| } | |
| static int max77620_thermal_probe(struct platform_device *pdev) | |
| { | |
| struct max77620_therm_info *mtherm; | |
| int ret; | |
| mtherm = devm_kzalloc(&pdev->dev, sizeof(*mtherm), GFP_KERNEL); | |
| if (!mtherm) | |
| return -ENOMEM; | |
| mtherm->irq_tjalarm1 = platform_get_irq(pdev, 0); | |
| mtherm->irq_tjalarm2 = platform_get_irq(pdev, 1); | |
| if ((mtherm->irq_tjalarm1 < 0) || (mtherm->irq_tjalarm2 < 0)) { | |
| dev_err(&pdev->dev, "Alarm irq number not available\n"); | |
| return -EINVAL; | |
| } | |
| pdev->dev.of_node = pdev->dev.parent->of_node; | |
| mtherm->dev = &pdev->dev; | |
| mtherm->rmap = dev_get_regmap(pdev->dev.parent, NULL); | |
| if (!mtherm->rmap) { | |
| dev_err(&pdev->dev, "Failed to get parent regmap\n"); | |
| return -ENODEV; | |
| } | |
| mtherm->tz_device = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, | |
| mtherm, &max77620_thermal_ops); | |
| if (IS_ERR(mtherm->tz_device)) { | |
| ret = PTR_ERR(mtherm->tz_device); | |
| dev_err(&pdev->dev, "Failed to register thermal zone: %d\n", | |
| ret); | |
| return ret; | |
| } | |
| ret = devm_request_threaded_irq(&pdev->dev, mtherm->irq_tjalarm1, NULL, | |
| max77620_thermal_irq, | |
| IRQF_ONESHOT | IRQF_SHARED, | |
| dev_name(&pdev->dev), mtherm); | |
| if (ret < 0) { | |
| dev_err(&pdev->dev, "Failed to request irq1: %d\n", ret); | |
| return ret; | |
| } | |
| ret = devm_request_threaded_irq(&pdev->dev, mtherm->irq_tjalarm2, NULL, | |
| max77620_thermal_irq, | |
| IRQF_ONESHOT | IRQF_SHARED, | |
| dev_name(&pdev->dev), mtherm); | |
| if (ret < 0) { | |
| dev_err(&pdev->dev, "Failed to request irq2: %d\n", ret); | |
| return ret; | |
| } | |
| platform_set_drvdata(pdev, mtherm); | |
| return 0; | |
| } | |
| static struct platform_device_id max77620_thermal_devtype[] = { | |
| { .name = "max77620-thermal", }, | |
| {}, | |
| }; | |
| static struct platform_driver max77620_thermal_driver = { | |
| .driver = { | |
| .name = "max77620-thermal", | |
| }, | |
| .probe = max77620_thermal_probe, | |
| .id_table = max77620_thermal_devtype, | |
| }; | |
| module_platform_driver(max77620_thermal_driver); | |
| MODULE_DESCRIPTION("Max77620 Junction temperature Thermal driver"); | |
| MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>"); | |
| MODULE_AUTHOR("Mallikarjun Kasoju <mkasoju@nvidia.com>"); | |
| MODULE_LICENSE("GPL v2"); |