| #include <linux/io.h> | |
| #include <linux/delay.h> | |
| #include <linux/module.h> | |
| #include <linux/thermal.h> | |
| #include <linux/platform_device.h> | |
| /* | |
| * According to a data sheet draft, "this temperature sensor uses a bandgap | |
| * type of circuit to compare a voltage which has a negative temperature | |
| * coefficient with a voltage that is proportional to absolute temperature. | |
| * A resistor bank allows 41 different temperature thresholds to be selected | |
| * and the logic output will then indicate whether the actual die temperature | |
| * lies above or below the selected threshold." | |
| */ | |
| #define TEMPSI_CMD 0 | |
| #define TEMPSI_RES 4 | |
| #define TEMPSI_CFG 8 | |
| #define CMD_OFF 0 | |
| #define CMD_ON 1 | |
| #define CMD_READ 2 | |
| #define IDX_MIN 15 | |
| #define IDX_MAX 40 | |
| struct tango_thermal_priv { | |
| void __iomem *base; | |
| int thresh_idx; | |
| }; | |
| static bool temp_above_thresh(void __iomem *base, int thresh_idx) | |
| { | |
| writel(CMD_READ | thresh_idx << 8, base + TEMPSI_CMD); | |
| usleep_range(10, 20); | |
| writel(CMD_READ | thresh_idx << 8, base + TEMPSI_CMD); | |
| return readl(base + TEMPSI_RES); | |
| } | |
| static int tango_get_temp(void *arg, int *res) | |
| { | |
| struct tango_thermal_priv *priv = arg; | |
| int idx = priv->thresh_idx; | |
| if (temp_above_thresh(priv->base, idx)) { | |
| /* Search upward by incrementing thresh_idx */ | |
| while (idx < IDX_MAX && temp_above_thresh(priv->base, ++idx)) | |
| cpu_relax(); | |
| idx = idx - 1; /* always return lower bound */ | |
| } else { | |
| /* Search downward by decrementing thresh_idx */ | |
| while (idx > IDX_MIN && !temp_above_thresh(priv->base, --idx)) | |
| cpu_relax(); | |
| } | |
| *res = (idx * 9 / 2 - 38) * 1000; /* millidegrees Celsius */ | |
| priv->thresh_idx = idx; | |
| return 0; | |
| } | |
| static const struct thermal_zone_of_device_ops ops = { | |
| .get_temp = tango_get_temp, | |
| }; | |
| static void tango_thermal_init(struct tango_thermal_priv *priv) | |
| { | |
| writel(0, priv->base + TEMPSI_CFG); | |
| writel(CMD_ON, priv->base + TEMPSI_CMD); | |
| } | |
| static int tango_thermal_probe(struct platform_device *pdev) | |
| { | |
| struct resource *res; | |
| struct tango_thermal_priv *priv; | |
| struct thermal_zone_device *tzdev; | |
| priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); | |
| if (!priv) | |
| return -ENOMEM; | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| priv->base = devm_ioremap_resource(&pdev->dev, res); | |
| if (IS_ERR(priv->base)) | |
| return PTR_ERR(priv->base); | |
| platform_set_drvdata(pdev, priv); | |
| priv->thresh_idx = IDX_MIN; | |
| tango_thermal_init(priv); | |
| tzdev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, priv, &ops); | |
| return PTR_ERR_OR_ZERO(tzdev); | |
| } | |
| static int __maybe_unused tango_thermal_resume(struct device *dev) | |
| { | |
| tango_thermal_init(dev_get_drvdata(dev)); | |
| return 0; | |
| } | |
| static SIMPLE_DEV_PM_OPS(tango_thermal_pm, NULL, tango_thermal_resume); | |
| static const struct of_device_id tango_sensor_ids[] = { | |
| { | |
| .compatible = "sigma,smp8758-thermal", | |
| }, | |
| { /* sentinel */ } | |
| }; | |
| static struct platform_driver tango_thermal_driver = { | |
| .probe = tango_thermal_probe, | |
| .driver = { | |
| .name = "tango-thermal", | |
| .of_match_table = tango_sensor_ids, | |
| .pm = &tango_thermal_pm, | |
| }, | |
| }; | |
| module_platform_driver(tango_thermal_driver); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_AUTHOR("Sigma Designs"); | |
| MODULE_DESCRIPTION("Tango temperature sensor"); |