| /* | |
| * UIO Hilscher CIF card driver | |
| * | |
| * (C) 2007 Hans J. Koch <hjk@hansjkoch.de> | |
| * Original code (C) 2005 Benedikt Spranger <b.spranger@linutronix.de> | |
| * | |
| * Licensed under GPL version 2 only. | |
| * | |
| */ | |
| #include <linux/device.h> | |
| #include <linux/module.h> | |
| #include <linux/pci.h> | |
| #include <linux/slab.h> | |
| #include <linux/uio_driver.h> | |
| #include <asm/io.h> | |
| #define PLX9030_INTCSR 0x4C | |
| #define INTSCR_INT1_ENABLE 0x01 | |
| #define INTSCR_INT1_STATUS 0x04 | |
| #define INT1_ENABLED_AND_ACTIVE (INTSCR_INT1_ENABLE | INTSCR_INT1_STATUS) | |
| #define PCI_SUBVENDOR_ID_PEP 0x1518 | |
| #define CIF_SUBDEVICE_PROFIBUS 0x430 | |
| #define CIF_SUBDEVICE_DEVICENET 0x432 | |
| static irqreturn_t hilscher_handler(int irq, struct uio_info *dev_info) | |
| { | |
| void __iomem *plx_intscr = dev_info->mem[0].internal_addr | |
| + PLX9030_INTCSR; | |
| if ((ioread8(plx_intscr) & INT1_ENABLED_AND_ACTIVE) | |
| != INT1_ENABLED_AND_ACTIVE) | |
| return IRQ_NONE; | |
| /* Disable interrupt */ | |
| iowrite8(ioread8(plx_intscr) & ~INTSCR_INT1_ENABLE, plx_intscr); | |
| return IRQ_HANDLED; | |
| } | |
| static int hilscher_pci_probe(struct pci_dev *dev, | |
| const struct pci_device_id *id) | |
| { | |
| struct uio_info *info; | |
| info = kzalloc(sizeof(struct uio_info), GFP_KERNEL); | |
| if (!info) | |
| return -ENOMEM; | |
| if (pci_enable_device(dev)) | |
| goto out_free; | |
| if (pci_request_regions(dev, "hilscher")) | |
| goto out_disable; | |
| info->mem[0].addr = pci_resource_start(dev, 0); | |
| if (!info->mem[0].addr) | |
| goto out_release; | |
| info->mem[0].internal_addr = pci_ioremap_bar(dev, 0); | |
| if (!info->mem[0].internal_addr) | |
| goto out_release; | |
| info->mem[0].size = pci_resource_len(dev, 0); | |
| info->mem[0].memtype = UIO_MEM_PHYS; | |
| info->mem[1].addr = pci_resource_start(dev, 2); | |
| info->mem[1].size = pci_resource_len(dev, 2); | |
| info->mem[1].memtype = UIO_MEM_PHYS; | |
| switch (id->subdevice) { | |
| case CIF_SUBDEVICE_PROFIBUS: | |
| info->name = "CIF_Profibus"; | |
| break; | |
| case CIF_SUBDEVICE_DEVICENET: | |
| info->name = "CIF_Devicenet"; | |
| break; | |
| default: | |
| info->name = "CIF_???"; | |
| } | |
| info->version = "0.0.1"; | |
| info->irq = dev->irq; | |
| info->irq_flags = IRQF_SHARED; | |
| info->handler = hilscher_handler; | |
| if (uio_register_device(&dev->dev, info)) | |
| goto out_unmap; | |
| pci_set_drvdata(dev, info); | |
| return 0; | |
| out_unmap: | |
| iounmap(info->mem[0].internal_addr); | |
| out_release: | |
| pci_release_regions(dev); | |
| out_disable: | |
| pci_disable_device(dev); | |
| out_free: | |
| kfree (info); | |
| return -ENODEV; | |
| } | |
| static void hilscher_pci_remove(struct pci_dev *dev) | |
| { | |
| struct uio_info *info = pci_get_drvdata(dev); | |
| uio_unregister_device(info); | |
| pci_release_regions(dev); | |
| pci_disable_device(dev); | |
| iounmap(info->mem[0].internal_addr); | |
| kfree (info); | |
| } | |
| static struct pci_device_id hilscher_pci_ids[] = { | |
| { | |
| .vendor = PCI_VENDOR_ID_PLX, | |
| .device = PCI_DEVICE_ID_PLX_9030, | |
| .subvendor = PCI_SUBVENDOR_ID_PEP, | |
| .subdevice = CIF_SUBDEVICE_PROFIBUS, | |
| }, | |
| { | |
| .vendor = PCI_VENDOR_ID_PLX, | |
| .device = PCI_DEVICE_ID_PLX_9030, | |
| .subvendor = PCI_SUBVENDOR_ID_PEP, | |
| .subdevice = CIF_SUBDEVICE_DEVICENET, | |
| }, | |
| { 0, } | |
| }; | |
| static struct pci_driver hilscher_pci_driver = { | |
| .name = "hilscher", | |
| .id_table = hilscher_pci_ids, | |
| .probe = hilscher_pci_probe, | |
| .remove = hilscher_pci_remove, | |
| }; | |
| module_pci_driver(hilscher_pci_driver); | |
| MODULE_DEVICE_TABLE(pci, hilscher_pci_ids); | |
| MODULE_LICENSE("GPL v2"); | |
| MODULE_AUTHOR("Hans J. Koch, Benedikt Spranger"); |