| /* | |
| * Wireless Host Controller (WHC) periodic schedule management. | |
| * | |
| * Copyright (C) 2007 Cambridge Silicon Radio Ltd. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License version | |
| * 2 as published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/gfp.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/uwb/umc.h> | |
| #include <linux/usb.h> | |
| #include "../../wusbcore/wusbhc.h" | |
| #include "whcd.h" | |
| static void update_pzl_pointers(struct whc *whc, int period, u64 addr) | |
| { | |
| switch (period) { | |
| case 0: | |
| whc_qset_set_link_ptr(&whc->pz_list[0], addr); | |
| whc_qset_set_link_ptr(&whc->pz_list[2], addr); | |
| whc_qset_set_link_ptr(&whc->pz_list[4], addr); | |
| whc_qset_set_link_ptr(&whc->pz_list[6], addr); | |
| whc_qset_set_link_ptr(&whc->pz_list[8], addr); | |
| whc_qset_set_link_ptr(&whc->pz_list[10], addr); | |
| whc_qset_set_link_ptr(&whc->pz_list[12], addr); | |
| whc_qset_set_link_ptr(&whc->pz_list[14], addr); | |
| break; | |
| case 1: | |
| whc_qset_set_link_ptr(&whc->pz_list[1], addr); | |
| whc_qset_set_link_ptr(&whc->pz_list[5], addr); | |
| whc_qset_set_link_ptr(&whc->pz_list[9], addr); | |
| whc_qset_set_link_ptr(&whc->pz_list[13], addr); | |
| break; | |
| case 2: | |
| whc_qset_set_link_ptr(&whc->pz_list[3], addr); | |
| whc_qset_set_link_ptr(&whc->pz_list[11], addr); | |
| break; | |
| case 3: | |
| whc_qset_set_link_ptr(&whc->pz_list[7], addr); | |
| break; | |
| case 4: | |
| whc_qset_set_link_ptr(&whc->pz_list[15], addr); | |
| break; | |
| } | |
| } | |
| /* | |
| * Return the 'period' to use for this qset. The minimum interval for | |
| * the endpoint is used so whatever urbs are submitted the device is | |
| * polled often enough. | |
| */ | |
| static int qset_get_period(struct whc *whc, struct whc_qset *qset) | |
| { | |
| uint8_t bInterval = qset->ep->desc.bInterval; | |
| if (bInterval < 6) | |
| bInterval = 6; | |
| if (bInterval > 10) | |
| bInterval = 10; | |
| return bInterval - 6; | |
| } | |
| static void qset_insert_in_sw_list(struct whc *whc, struct whc_qset *qset) | |
| { | |
| int period; | |
| period = qset_get_period(whc, qset); | |
| qset_clear(whc, qset); | |
| list_move(&qset->list_node, &whc->periodic_list[period]); | |
| qset->in_sw_list = true; | |
| } | |
| static void pzl_qset_remove(struct whc *whc, struct whc_qset *qset) | |
| { | |
| list_move(&qset->list_node, &whc->periodic_removed_list); | |
| qset->in_hw_list = false; | |
| qset->in_sw_list = false; | |
| } | |
| /** | |
| * pzl_process_qset - process any recently inactivated or halted qTDs | |
| * in a qset. | |
| * | |
| * After inactive qTDs are removed, new qTDs can be added if the | |
| * urb queue still contains URBs. | |
| * | |
| * Returns the schedule updates required. | |
| */ | |
| static enum whc_update pzl_process_qset(struct whc *whc, struct whc_qset *qset) | |
| { | |
| enum whc_update update = 0; | |
| uint32_t status = 0; | |
| while (qset->ntds) { | |
| struct whc_qtd *td; | |
| int t; | |
| t = qset->td_start; | |
| td = &qset->qtd[qset->td_start]; | |
| status = le32_to_cpu(td->status); | |
| /* | |
| * Nothing to do with a still active qTD. | |
| */ | |
| if (status & QTD_STS_ACTIVE) | |
| break; | |
| if (status & QTD_STS_HALTED) { | |
| /* Ug, an error. */ | |
| process_halted_qtd(whc, qset, td); | |
| /* A halted qTD always triggers an update | |
| because the qset was either removed or | |
| reactivated. */ | |
| update |= WHC_UPDATE_UPDATED; | |
| goto done; | |
| } | |
| /* Mmm, a completed qTD. */ | |
| process_inactive_qtd(whc, qset, td); | |
| } | |
| if (!qset->remove) | |
| update |= qset_add_qtds(whc, qset); | |
| done: | |
| /* | |
| * If there are no qTDs in this qset, remove it from the PZL. | |
| */ | |
| if (qset->remove && qset->ntds == 0) { | |
| pzl_qset_remove(whc, qset); | |
| update |= WHC_UPDATE_REMOVED; | |
| } | |
| return update; | |
| } | |
| /** | |
| * pzl_start - start the periodic schedule | |
| * @whc: the WHCI host controller | |
| * | |
| * The PZL must be valid (e.g., all entries in the list should have | |
| * the T bit set). | |
| */ | |
| void pzl_start(struct whc *whc) | |
| { | |
| le_writeq(whc->pz_list_dma, whc->base + WUSBPERIODICLISTBASE); | |
| whc_write_wusbcmd(whc, WUSBCMD_PERIODIC_EN, WUSBCMD_PERIODIC_EN); | |
| whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, | |
| WUSBSTS_PERIODIC_SCHED, WUSBSTS_PERIODIC_SCHED, | |
| 1000, "start PZL"); | |
| } | |
| /** | |
| * pzl_stop - stop the periodic schedule | |
| * @whc: the WHCI host controller | |
| */ | |
| void pzl_stop(struct whc *whc) | |
| { | |
| whc_write_wusbcmd(whc, WUSBCMD_PERIODIC_EN, 0); | |
| whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, | |
| WUSBSTS_PERIODIC_SCHED, 0, | |
| 1000, "stop PZL"); | |
| } | |
| /** | |
| * pzl_update - request a PZL update and wait for the hardware to be synced | |
| * @whc: the WHCI HC | |
| * @wusbcmd: WUSBCMD value to start the update. | |
| * | |
| * If the WUSB HC is inactive (i.e., the PZL is stopped) then the | |
| * update must be skipped as the hardware may not respond to update | |
| * requests. | |
| */ | |
| void pzl_update(struct whc *whc, uint32_t wusbcmd) | |
| { | |
| struct wusbhc *wusbhc = &whc->wusbhc; | |
| long t; | |
| mutex_lock(&wusbhc->mutex); | |
| if (wusbhc->active) { | |
| whc_write_wusbcmd(whc, wusbcmd, wusbcmd); | |
| t = wait_event_timeout( | |
| whc->periodic_list_wq, | |
| (le_readl(whc->base + WUSBCMD) & WUSBCMD_PERIODIC_UPDATED) == 0, | |
| msecs_to_jiffies(1000)); | |
| if (t == 0) | |
| whc_hw_error(whc, "PZL update timeout"); | |
| } | |
| mutex_unlock(&wusbhc->mutex); | |
| } | |
| static void update_pzl_hw_view(struct whc *whc) | |
| { | |
| struct whc_qset *qset, *t; | |
| int period; | |
| u64 tmp_qh = 0; | |
| for (period = 0; period < 5; period++) { | |
| list_for_each_entry_safe(qset, t, &whc->periodic_list[period], list_node) { | |
| whc_qset_set_link_ptr(&qset->qh.link, tmp_qh); | |
| tmp_qh = qset->qset_dma; | |
| qset->in_hw_list = true; | |
| } | |
| update_pzl_pointers(whc, period, tmp_qh); | |
| } | |
| } | |
| /** | |
| * scan_periodic_work - scan the PZL for qsets to process. | |
| * | |
| * Process each qset in the PZL in turn and then signal the WHC that | |
| * the PZL has been updated. | |
| * | |
| * Then start, stop or update the periodic schedule as required. | |
| */ | |
| void scan_periodic_work(struct work_struct *work) | |
| { | |
| struct whc *whc = container_of(work, struct whc, periodic_work); | |
| struct whc_qset *qset, *t; | |
| enum whc_update update = 0; | |
| int period; | |
| spin_lock_irq(&whc->lock); | |
| for (period = 4; period >= 0; period--) { | |
| list_for_each_entry_safe(qset, t, &whc->periodic_list[period], list_node) { | |
| if (!qset->in_hw_list) | |
| update |= WHC_UPDATE_ADDED; | |
| update |= pzl_process_qset(whc, qset); | |
| } | |
| } | |
| if (update & (WHC_UPDATE_ADDED | WHC_UPDATE_REMOVED)) | |
| update_pzl_hw_view(whc); | |
| spin_unlock_irq(&whc->lock); | |
| if (update) { | |
| uint32_t wusbcmd = WUSBCMD_PERIODIC_UPDATED | WUSBCMD_PERIODIC_SYNCED_DB; | |
| if (update & WHC_UPDATE_REMOVED) | |
| wusbcmd |= WUSBCMD_PERIODIC_QSET_RM; | |
| pzl_update(whc, wusbcmd); | |
| } | |
| /* | |
| * Now that the PZL is updated, complete the removal of any | |
| * removed qsets. | |
| * | |
| * If the qset was to be reset, do so and reinsert it into the | |
| * PZL if it has pending transfers. | |
| */ | |
| spin_lock_irq(&whc->lock); | |
| list_for_each_entry_safe(qset, t, &whc->periodic_removed_list, list_node) { | |
| qset_remove_complete(whc, qset); | |
| if (qset->reset) { | |
| qset_reset(whc, qset); | |
| if (!list_empty(&qset->stds)) { | |
| qset_insert_in_sw_list(whc, qset); | |
| queue_work(whc->workqueue, &whc->periodic_work); | |
| } | |
| } | |
| } | |
| spin_unlock_irq(&whc->lock); | |
| } | |
| /** | |
| * pzl_urb_enqueue - queue an URB onto the periodic list (PZL) | |
| * @whc: the WHCI host controller | |
| * @urb: the URB to enqueue | |
| * @mem_flags: flags for any memory allocations | |
| * | |
| * The qset for the endpoint is obtained and the urb queued on to it. | |
| * | |
| * Work is scheduled to update the hardware's view of the PZL. | |
| */ | |
| int pzl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags) | |
| { | |
| struct whc_qset *qset; | |
| int err; | |
| unsigned long flags; | |
| spin_lock_irqsave(&whc->lock, flags); | |
| err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb); | |
| if (err < 0) { | |
| spin_unlock_irqrestore(&whc->lock, flags); | |
| return err; | |
| } | |
| qset = get_qset(whc, urb, GFP_ATOMIC); | |
| if (qset == NULL) | |
| err = -ENOMEM; | |
| else | |
| err = qset_add_urb(whc, qset, urb, GFP_ATOMIC); | |
| if (!err) { | |
| if (!qset->in_sw_list && !qset->remove) | |
| qset_insert_in_sw_list(whc, qset); | |
| } else | |
| usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb); | |
| spin_unlock_irqrestore(&whc->lock, flags); | |
| if (!err) | |
| queue_work(whc->workqueue, &whc->periodic_work); | |
| return err; | |
| } | |
| /** | |
| * pzl_urb_dequeue - remove an URB (qset) from the periodic list | |
| * @whc: the WHCI host controller | |
| * @urb: the URB to dequeue | |
| * @status: the current status of the URB | |
| * | |
| * URBs that do yet have qTDs can simply be removed from the software | |
| * queue, otherwise the qset must be removed so the qTDs can be safely | |
| * removed. | |
| */ | |
| int pzl_urb_dequeue(struct whc *whc, struct urb *urb, int status) | |
| { | |
| struct whc_urb *wurb = urb->hcpriv; | |
| struct whc_qset *qset = wurb->qset; | |
| struct whc_std *std, *t; | |
| bool has_qtd = false; | |
| int ret; | |
| unsigned long flags; | |
| spin_lock_irqsave(&whc->lock, flags); | |
| ret = usb_hcd_check_unlink_urb(&whc->wusbhc.usb_hcd, urb, status); | |
| if (ret < 0) | |
| goto out; | |
| list_for_each_entry_safe(std, t, &qset->stds, list_node) { | |
| if (std->urb == urb) { | |
| if (std->qtd) | |
| has_qtd = true; | |
| qset_free_std(whc, std); | |
| } else | |
| std->qtd = NULL; /* so this std is re-added when the qset is */ | |
| } | |
| if (has_qtd) { | |
| pzl_qset_remove(whc, qset); | |
| update_pzl_hw_view(whc); | |
| wurb->status = status; | |
| wurb->is_async = false; | |
| queue_work(whc->workqueue, &wurb->dequeue_work); | |
| } else | |
| qset_remove_urb(whc, qset, urb, status); | |
| out: | |
| spin_unlock_irqrestore(&whc->lock, flags); | |
| return ret; | |
| } | |
| /** | |
| * pzl_qset_delete - delete a qset from the PZL | |
| */ | |
| void pzl_qset_delete(struct whc *whc, struct whc_qset *qset) | |
| { | |
| qset->remove = 1; | |
| queue_work(whc->workqueue, &whc->periodic_work); | |
| qset_delete(whc, qset); | |
| } | |
| /** | |
| * pzl_init - initialize the periodic zone list | |
| * @whc: the WHCI host controller | |
| */ | |
| int pzl_init(struct whc *whc) | |
| { | |
| int i; | |
| whc->pz_list = dma_alloc_coherent(&whc->umc->dev, sizeof(u64) * 16, | |
| &whc->pz_list_dma, GFP_KERNEL); | |
| if (whc->pz_list == NULL) | |
| return -ENOMEM; | |
| /* Set T bit on all elements in PZL. */ | |
| for (i = 0; i < 16; i++) | |
| whc->pz_list[i] = cpu_to_le64(QH_LINK_NTDS(8) | QH_LINK_T); | |
| le_writeq(whc->pz_list_dma, whc->base + WUSBPERIODICLISTBASE); | |
| return 0; | |
| } | |
| /** | |
| * pzl_clean_up - free PZL resources | |
| * @whc: the WHCI host controller | |
| * | |
| * The PZL is stopped and empty. | |
| */ | |
| void pzl_clean_up(struct whc *whc) | |
| { | |
| if (whc->pz_list) | |
| dma_free_coherent(&whc->umc->dev, sizeof(u64) * 16, whc->pz_list, | |
| whc->pz_list_dma); | |
| } |