| # | |
| # USB Dual Role (OTG-ready) Controller Drivers | |
| # for silicon based on Mentor Graphics INVENTRA designs | |
| # | |
| # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller | |
| config USB_MUSB_HDRC | |
| tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, AW, ...)' | |
| depends on (USB || USB_GADGET) | |
| depends on HAS_IOMEM | |
| help | |
| Say Y here if your system has a dual role high speed USB | |
| controller based on the Mentor Graphics silicon IP. Then | |
| configure options to match your silicon and the board | |
| it's being used with, including the USB peripheral role, | |
| or the USB host role, or both. | |
| Texas Instruments families using this IP include DaVinci | |
| (35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010. | |
| Analog Devices parts using this IP include Blackfin BF54x, | |
| BF525 and BF527. | |
| Allwinner SoCs using this IP include A10, A13, A20, ... | |
| If you do not know what this is, please say N. | |
| To compile this driver as a module, choose M here; the | |
| module will be called "musb-hdrc". | |
| if USB_MUSB_HDRC | |
| choice | |
| bool "MUSB Mode Selection" | |
| default USB_MUSB_DUAL_ROLE if (USB && USB_GADGET) | |
| default USB_MUSB_HOST if (USB && !USB_GADGET) | |
| default USB_MUSB_GADGET if (!USB && USB_GADGET) | |
| config USB_MUSB_HOST | |
| bool "Host only mode" | |
| depends on USB=y || USB=USB_MUSB_HDRC | |
| help | |
| Select this when you want to use MUSB in host mode only, | |
| thereby the gadget feature will be regressed. | |
| config USB_MUSB_GADGET | |
| bool "Gadget only mode" | |
| depends on USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC | |
| depends on HAS_DMA | |
| help | |
| Select this when you want to use MUSB in gadget mode only, | |
| thereby the host feature will be regressed. | |
| config USB_MUSB_DUAL_ROLE | |
| bool "Dual Role mode" | |
| depends on ((USB=y || USB=USB_MUSB_HDRC) && (USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC)) | |
| depends on HAS_DMA | |
| help | |
| This is the default mode of working of MUSB controller where | |
| both host and gadget features are enabled. | |
| endchoice | |
| comment "Platform Glue Layer" | |
| config USB_MUSB_SUNXI | |
| tristate "Allwinner (sunxi)" | |
| depends on ARCH_SUNXI | |
| depends on NOP_USB_XCEIV | |
| depends on PHY_SUN4I_USB | |
| depends on EXTCON | |
| depends on GENERIC_PHY | |
| select SUNXI_SRAM | |
| config USB_MUSB_DAVINCI | |
| tristate "DaVinci" | |
| depends on ARCH_DAVINCI_DMx | |
| depends on NOP_USB_XCEIV | |
| depends on BROKEN | |
| config USB_MUSB_DA8XX | |
| tristate "DA8xx/OMAP-L1x" | |
| depends on ARCH_DAVINCI_DA8XX | |
| depends on NOP_USB_XCEIV | |
| select PHY_DA8XX_USB | |
| config USB_MUSB_TUSB6010 | |
| tristate "TUSB6010" | |
| depends on HAS_IOMEM | |
| depends on (ARCH_OMAP2PLUS || COMPILE_TEST) && !BLACKFIN | |
| depends on NOP_USB_XCEIV = USB_MUSB_HDRC # both built-in or both modules | |
| config USB_MUSB_OMAP2PLUS | |
| tristate "OMAP2430 and onwards" | |
| depends on ARCH_OMAP2PLUS && USB | |
| depends on OMAP_CONTROL_PHY || !OMAP_CONTROL_PHY | |
| select GENERIC_PHY | |
| config USB_MUSB_AM35X | |
| tristate "AM35x" | |
| depends on ARCH_OMAP | |
| depends on NOP_USB_XCEIV | |
| config USB_MUSB_DSPS | |
| tristate "TI DSPS platforms" | |
| select USB_MUSB_AM335X_CHILD | |
| depends on ARCH_OMAP2PLUS || COMPILE_TEST | |
| depends on OF_IRQ | |
| config USB_MUSB_BLACKFIN | |
| tristate "Blackfin" | |
| depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523) | |
| depends on NOP_USB_XCEIV | |
| config USB_MUSB_UX500 | |
| tristate "Ux500 platforms" | |
| depends on ARCH_U8500 || COMPILE_TEST | |
| config USB_MUSB_JZ4740 | |
| tristate "JZ4740" | |
| depends on NOP_USB_XCEIV | |
| depends on MACH_JZ4740 || COMPILE_TEST | |
| depends on USB_MUSB_GADGET | |
| depends on USB_OTG_BLACKLIST_HUB | |
| config USB_MUSB_AM335X_CHILD | |
| tristate | |
| comment "MUSB DMA mode" | |
| config MUSB_PIO_ONLY | |
| bool 'Disable DMA (always use PIO)' | |
| help | |
| All data is copied between memory and FIFO by the CPU. | |
| DMA controllers are ignored. | |
| Do not choose this unless DMA support for your SOC or board | |
| is unavailable (or unstable). When DMA is enabled at compile time, | |
| you can still disable it at run time using the "use_dma=n" module | |
| parameter. | |
| if !MUSB_PIO_ONLY | |
| config USB_UX500_DMA | |
| bool 'ST Ericsson Ux500' | |
| depends on USB_MUSB_UX500 | |
| help | |
| Enable DMA transfers on UX500 platforms. | |
| config USB_INVENTRA_DMA | |
| bool 'Inventra' | |
| depends on USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN | |
| help | |
| Enable DMA transfers using Mentor's engine. | |
| config USB_TI_CPPI_DMA | |
| bool 'TI CPPI (Davinci)' | |
| depends on USB_MUSB_DAVINCI | |
| help | |
| Enable DMA transfers when TI CPPI DMA is available. | |
| config USB_TI_CPPI41_DMA | |
| bool 'TI CPPI 4.1 (AM335x)' | |
| depends on ARCH_OMAP && DMADEVICES | |
| select TI_CPPI41 | |
| config USB_TUSB_OMAP_DMA | |
| bool 'TUSB 6010' | |
| depends on USB_MUSB_TUSB6010 = USB_MUSB_HDRC # both built-in or both modules | |
| depends on ARCH_OMAP | |
| help | |
| Enable DMA transfers on TUSB 6010 when OMAP DMA is available. | |
| endif # !MUSB_PIO_ONLY | |
| endif # USB_MUSB_HDRC |