| /* | |
| * OMAP OTG controller driver | |
| * | |
| * Based on code from tahvo-usb.c and isp1301_omap.c drivers. | |
| * | |
| * Copyright (C) 2005-2006 Nokia Corporation | |
| * Copyright (C) 2004 Texas Instruments | |
| * Copyright (C) 2004 David Brownell | |
| * | |
| * This file is subject to the terms and conditions of the GNU General | |
| * Public License. See the file "COPYING" in the main directory of this | |
| * archive for more details. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| */ | |
| #include <linux/io.h> | |
| #include <linux/err.h> | |
| #include <linux/extcon.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/platform_data/usb-omap1.h> | |
| struct otg_device { | |
| void __iomem *base; | |
| bool id; | |
| bool vbus; | |
| struct extcon_dev *extcon; | |
| struct notifier_block vbus_nb; | |
| struct notifier_block id_nb; | |
| }; | |
| #define OMAP_OTG_CTRL 0x0c | |
| #define OMAP_OTG_ASESSVLD (1 << 20) | |
| #define OMAP_OTG_BSESSEND (1 << 19) | |
| #define OMAP_OTG_BSESSVLD (1 << 18) | |
| #define OMAP_OTG_VBUSVLD (1 << 17) | |
| #define OMAP_OTG_ID (1 << 16) | |
| #define OMAP_OTG_XCEIV_OUTPUTS \ | |
| (OMAP_OTG_ASESSVLD | OMAP_OTG_BSESSEND | OMAP_OTG_BSESSVLD | \ | |
| OMAP_OTG_VBUSVLD | OMAP_OTG_ID) | |
| static void omap_otg_ctrl(struct otg_device *otg_dev, u32 outputs) | |
| { | |
| u32 l; | |
| l = readl(otg_dev->base + OMAP_OTG_CTRL); | |
| l &= ~OMAP_OTG_XCEIV_OUTPUTS; | |
| l |= outputs; | |
| writel(l, otg_dev->base + OMAP_OTG_CTRL); | |
| } | |
| static void omap_otg_set_mode(struct otg_device *otg_dev) | |
| { | |
| if (!otg_dev->id && otg_dev->vbus) | |
| /* Set B-session valid. */ | |
| omap_otg_ctrl(otg_dev, OMAP_OTG_ID | OMAP_OTG_BSESSVLD); | |
| else if (otg_dev->vbus) | |
| /* Set A-session valid. */ | |
| omap_otg_ctrl(otg_dev, OMAP_OTG_ASESSVLD); | |
| else if (!otg_dev->id) | |
| /* Set B-session end to indicate no VBUS. */ | |
| omap_otg_ctrl(otg_dev, OMAP_OTG_ID | OMAP_OTG_BSESSEND); | |
| } | |
| static int omap_otg_id_notifier(struct notifier_block *nb, | |
| unsigned long event, void *ptr) | |
| { | |
| struct otg_device *otg_dev = container_of(nb, struct otg_device, id_nb); | |
| otg_dev->id = event; | |
| omap_otg_set_mode(otg_dev); | |
| return NOTIFY_DONE; | |
| } | |
| static int omap_otg_vbus_notifier(struct notifier_block *nb, | |
| unsigned long event, void *ptr) | |
| { | |
| struct otg_device *otg_dev = container_of(nb, struct otg_device, | |
| vbus_nb); | |
| otg_dev->vbus = event; | |
| omap_otg_set_mode(otg_dev); | |
| return NOTIFY_DONE; | |
| } | |
| static int omap_otg_probe(struct platform_device *pdev) | |
| { | |
| const struct omap_usb_config *config = pdev->dev.platform_data; | |
| struct otg_device *otg_dev; | |
| struct extcon_dev *extcon; | |
| int ret; | |
| u32 rev; | |
| if (!config || !config->extcon) | |
| return -ENODEV; | |
| extcon = extcon_get_extcon_dev(config->extcon); | |
| if (!extcon) | |
| return -EPROBE_DEFER; | |
| otg_dev = devm_kzalloc(&pdev->dev, sizeof(*otg_dev), GFP_KERNEL); | |
| if (!otg_dev) | |
| return -ENOMEM; | |
| otg_dev->base = devm_ioremap_resource(&pdev->dev, &pdev->resource[0]); | |
| if (IS_ERR(otg_dev->base)) | |
| return PTR_ERR(otg_dev->base); | |
| otg_dev->extcon = extcon; | |
| otg_dev->id_nb.notifier_call = omap_otg_id_notifier; | |
| otg_dev->vbus_nb.notifier_call = omap_otg_vbus_notifier; | |
| ret = extcon_register_notifier(extcon, EXTCON_USB_HOST, &otg_dev->id_nb); | |
| if (ret) | |
| return ret; | |
| ret = extcon_register_notifier(extcon, EXTCON_USB, &otg_dev->vbus_nb); | |
| if (ret) { | |
| extcon_unregister_notifier(extcon, EXTCON_USB_HOST, | |
| &otg_dev->id_nb); | |
| return ret; | |
| } | |
| otg_dev->id = extcon_get_cable_state_(extcon, EXTCON_USB_HOST); | |
| otg_dev->vbus = extcon_get_cable_state_(extcon, EXTCON_USB); | |
| omap_otg_set_mode(otg_dev); | |
| rev = readl(otg_dev->base); | |
| dev_info(&pdev->dev, | |
| "OMAP USB OTG controller rev %d.%d (%s, id=%d, vbus=%d)\n", | |
| (rev >> 4) & 0xf, rev & 0xf, config->extcon, otg_dev->id, | |
| otg_dev->vbus); | |
| platform_set_drvdata(pdev, otg_dev); | |
| return 0; | |
| } | |
| static int omap_otg_remove(struct platform_device *pdev) | |
| { | |
| struct otg_device *otg_dev = platform_get_drvdata(pdev); | |
| struct extcon_dev *edev = otg_dev->extcon; | |
| extcon_unregister_notifier(edev, EXTCON_USB_HOST, &otg_dev->id_nb); | |
| extcon_unregister_notifier(edev, EXTCON_USB, &otg_dev->vbus_nb); | |
| return 0; | |
| } | |
| static struct platform_driver omap_otg_driver = { | |
| .probe = omap_otg_probe, | |
| .remove = omap_otg_remove, | |
| .driver = { | |
| .name = "omap_otg", | |
| }, | |
| }; | |
| module_platform_driver(omap_otg_driver); | |
| MODULE_DESCRIPTION("OMAP USB OTG controller driver"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_AUTHOR("Aaro Koskinen <aaro.koskinen@iki.fi>"); |