| #define SUSBCRequest_SetBaudRateParityAndStopBits 1 | |
| #define SUSBCR_SBR_MASK 0xFF00 | |
| #define SUSBCR_SBR_1200 0x0100 | |
| #define SUSBCR_SBR_9600 0x0200 | |
| #define SUSBCR_SBR_19200 0x0400 | |
| #define SUSBCR_SBR_28800 0x0800 | |
| #define SUSBCR_SBR_38400 0x1000 | |
| #define SUSBCR_SBR_57600 0x2000 | |
| #define SUSBCR_SBR_115200 0x4000 | |
| #define SUSBCR_SPASB_MASK 0x0070 | |
| #define SUSBCR_SPASB_NoParity 0x0010 | |
| #define SUSBCR_SPASB_OddParity 0x0020 | |
| #define SUSBCR_SPASB_EvenParity 0x0040 | |
| #define SUSBCR_SPASB_STPMASK 0x0003 | |
| #define SUSBCR_SPASB_1StopBit 0x0001 | |
| #define SUSBCR_SPASB_2StopBits 0x0002 | |
| #define SUSBCRequest_SetStatusLinesOrQueues 2 | |
| #define SUSBCR_SSL_SETRTS 0x0001 | |
| #define SUSBCR_SSL_CLRRTS 0x0002 | |
| #define SUSBCR_SSL_SETDTR 0x0004 | |
| #define SUSBCR_SSL_CLRDTR 0x0010 | |
| /* Kill the pending/current writes to the comm port. */ | |
| #define SUSBCR_SSL_PURGE_TXABORT 0x0100 | |
| /* Kill the pending/current reads to the comm port. */ | |
| #define SUSBCR_SSL_PURGE_RXABORT 0x0200 | |
| /* Kill the transmit queue if there. */ | |
| #define SUSBCR_SSL_PURGE_TXCLEAR 0x0400 | |
| /* Kill the typeahead buffer if there. */ | |
| #define SUSBCR_SSL_PURGE_RXCLEAR 0x0800 | |
| #define SUSBCRequest_GetStatusLineState 4 | |
| /* Any Character received */ | |
| #define SUSBCR_GSL_RXCHAR 0x0001 | |
| /* Transmitt Queue Empty */ | |
| #define SUSBCR_GSL_TXEMPTY 0x0004 | |
| /* CTS changed state */ | |
| #define SUSBCR_GSL_CTS 0x0008 | |
| /* DSR changed state */ | |
| #define SUSBCR_GSL_DSR 0x0010 | |
| /* RLSD changed state */ | |
| #define SUSBCR_GSL_RLSD 0x0020 | |
| /* BREAK received */ | |
| #define SUSBCR_GSL_BREAK 0x0040 | |
| /* Line status error occurred */ | |
| #define SUSBCR_GSL_ERR 0x0080 | |
| /* Ring signal detected */ | |
| #define SUSBCR_GSL_RING 0x0100 | |
| #define SUSBCRequest_Misc 8 | |
| /* use a predefined reset sequence */ | |
| #define SUSBCR_MSC_ResetReader 0x0001 | |
| /* use a predefined sequence to reset the internal queues */ | |
| #define SUSBCR_MSC_ResetAllQueues 0x0002 | |
| #define SUSBCRequest_GetMisc 0x10 | |
| /* | |
| * get the firmware version from device, coded like this 0xHHLLBBPP with | |
| * HH = Firmware Version High Byte | |
| * LL = Firmware Version Low Byte | |
| * BB = Build Number | |
| * PP = Further Attributes | |
| */ | |
| #define SUSBCR_MSC_GetFWVersion 0x0001 | |
| /* | |
| * get the hardware version from device coded like this 0xHHLLPPRR with | |
| * HH = Software Version High Byte | |
| * LL = Software Version Low Byte | |
| * PP = Further Attributes | |
| * RR = Reserved for the hardware ID | |
| */ | |
| #define SUSBCR_MSC_GetHWVersion 0x0002 |