| /* | |
| * Wireless Host Controller: Radio Control Interface (WHCI v0.95[2.3]) | |
| * Radio Control command/event transport to the UWB stack | |
| * | |
| * Copyright (C) 2005-2006 Intel Corporation | |
| * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License version | |
| * 2 as published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA | |
| * 02110-1301, USA. | |
| * | |
| * | |
| * Initialize and hook up the Radio Control interface. | |
| * | |
| * For each device probed, creates an 'struct whcrc' which contains | |
| * just the representation of the UWB Radio Controller, and the logic | |
| * for reading notifications and passing them to the UWB Core. | |
| * | |
| * So we initialize all of those, register the UWB Radio Controller | |
| * and setup the notification/event handle to pipe the notifications | |
| * to the UWB management Daemon. | |
| * | |
| * Once uwb_rc_add() is called, the UWB stack takes control, resets | |
| * the radio and readies the device to take commands the UWB | |
| * API/user-space. | |
| * | |
| * Note this driver is just a transport driver; the commands are | |
| * formed at the UWB stack and given to this driver who will deliver | |
| * them to the hw and transfer the replies/notifications back to the | |
| * UWB stack through the UWB daemon (UWBD). | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/module.h> | |
| #include <linux/pci.h> | |
| #include <linux/sched.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/slab.h> | |
| #include <linux/workqueue.h> | |
| #include <linux/uwb.h> | |
| #include <linux/uwb/whci.h> | |
| #include <linux/uwb/umc.h> | |
| #include "uwb-internal.h" | |
| /** | |
| * Descriptor for an instance of the UWB Radio Control Driver that | |
| * attaches to the URC interface of the WHCI PCI card. | |
| * | |
| * Unless there is a lock specific to the 'data members', all access | |
| * is protected by uwb_rc->mutex. | |
| */ | |
| struct whcrc { | |
| struct umc_dev *umc_dev; | |
| struct uwb_rc *uwb_rc; /* UWB host controller */ | |
| unsigned long area; | |
| void __iomem *rc_base; | |
| size_t rc_len; | |
| spinlock_t irq_lock; | |
| void *evt_buf, *cmd_buf; | |
| dma_addr_t evt_dma_buf, cmd_dma_buf; | |
| wait_queue_head_t cmd_wq; | |
| struct work_struct event_work; | |
| }; | |
| /** | |
| * Execute an UWB RC command on WHCI/RC | |
| * | |
| * @rc: Instance of a Radio Controller that is a whcrc | |
| * @cmd: Buffer containing the RCCB and payload to execute | |
| * @cmd_size: Size of the command buffer. | |
| * | |
| * We copy the command into whcrc->cmd_buf (as it is pretty and | |
| * aligned`and physically contiguous) and then press the right keys in | |
| * the controller's URCCMD register to get it to read it. We might | |
| * have to wait for the cmd_sem to be open to us. | |
| * | |
| * NOTE: rc's mutex has to be locked | |
| */ | |
| static int whcrc_cmd(struct uwb_rc *uwb_rc, | |
| const struct uwb_rccb *cmd, size_t cmd_size) | |
| { | |
| int result = 0; | |
| struct whcrc *whcrc = uwb_rc->priv; | |
| struct device *dev = &whcrc->umc_dev->dev; | |
| u32 urccmd; | |
| if (cmd_size >= 4096) | |
| return -EINVAL; | |
| /* | |
| * If the URC is halted, then the hardware has reset itself. | |
| * Attempt to recover by restarting the device and then return | |
| * an error as it's likely that the current command isn't | |
| * valid for a newly started RC. | |
| */ | |
| if (le_readl(whcrc->rc_base + URCSTS) & URCSTS_HALTED) { | |
| dev_err(dev, "requesting reset of halted radio controller\n"); | |
| uwb_rc_reset_all(uwb_rc); | |
| return -EIO; | |
| } | |
| result = wait_event_timeout(whcrc->cmd_wq, | |
| !(le_readl(whcrc->rc_base + URCCMD) & URCCMD_ACTIVE), HZ/2); | |
| if (result == 0) { | |
| dev_err(dev, "device is not ready to execute commands\n"); | |
| return -ETIMEDOUT; | |
| } | |
| memmove(whcrc->cmd_buf, cmd, cmd_size); | |
| le_writeq(whcrc->cmd_dma_buf, whcrc->rc_base + URCCMDADDR); | |
| spin_lock(&whcrc->irq_lock); | |
| urccmd = le_readl(whcrc->rc_base + URCCMD); | |
| urccmd &= ~(URCCMD_EARV | URCCMD_SIZE_MASK); | |
| le_writel(urccmd | URCCMD_ACTIVE | URCCMD_IWR | cmd_size, | |
| whcrc->rc_base + URCCMD); | |
| spin_unlock(&whcrc->irq_lock); | |
| return 0; | |
| } | |
| static int whcrc_reset(struct uwb_rc *rc) | |
| { | |
| struct whcrc *whcrc = rc->priv; | |
| return umc_controller_reset(whcrc->umc_dev); | |
| } | |
| /** | |
| * Reset event reception mechanism and tell hw we are ready to get more | |
| * | |
| * We have read all the events in the event buffer, so we are ready to | |
| * reset it to the beginning. | |
| * | |
| * This is only called during initialization or after an event buffer | |
| * has been retired. This means we can be sure that event processing | |
| * is disabled and it's safe to update the URCEVTADDR register. | |
| * | |
| * There's no need to wait for the event processing to start as the | |
| * URC will not clear URCCMD_ACTIVE until (internal) event buffer | |
| * space is available. | |
| */ | |
| static | |
| void whcrc_enable_events(struct whcrc *whcrc) | |
| { | |
| u32 urccmd; | |
| le_writeq(whcrc->evt_dma_buf, whcrc->rc_base + URCEVTADDR); | |
| spin_lock(&whcrc->irq_lock); | |
| urccmd = le_readl(whcrc->rc_base + URCCMD) & ~URCCMD_ACTIVE; | |
| le_writel(urccmd | URCCMD_EARV, whcrc->rc_base + URCCMD); | |
| spin_unlock(&whcrc->irq_lock); | |
| } | |
| static void whcrc_event_work(struct work_struct *work) | |
| { | |
| struct whcrc *whcrc = container_of(work, struct whcrc, event_work); | |
| size_t size; | |
| u64 urcevtaddr; | |
| urcevtaddr = le_readq(whcrc->rc_base + URCEVTADDR); | |
| size = urcevtaddr & URCEVTADDR_OFFSET_MASK; | |
| uwb_rc_neh_grok(whcrc->uwb_rc, whcrc->evt_buf, size); | |
| whcrc_enable_events(whcrc); | |
| } | |
| /** | |
| * Catch interrupts? | |
| * | |
| * We ack inmediately (and expect the hw to do the right thing and | |
| * raise another IRQ if things have changed :) | |
| */ | |
| static | |
| irqreturn_t whcrc_irq_cb(int irq, void *_whcrc) | |
| { | |
| struct whcrc *whcrc = _whcrc; | |
| struct device *dev = &whcrc->umc_dev->dev; | |
| u32 urcsts; | |
| urcsts = le_readl(whcrc->rc_base + URCSTS); | |
| if (!(urcsts & URCSTS_INT_MASK)) | |
| return IRQ_NONE; | |
| le_writel(urcsts & URCSTS_INT_MASK, whcrc->rc_base + URCSTS); | |
| if (urcsts & URCSTS_HSE) { | |
| dev_err(dev, "host system error -- hardware halted\n"); | |
| /* FIXME: do something sensible here */ | |
| goto out; | |
| } | |
| if (urcsts & URCSTS_ER) | |
| schedule_work(&whcrc->event_work); | |
| if (urcsts & URCSTS_RCI) | |
| wake_up_all(&whcrc->cmd_wq); | |
| out: | |
| return IRQ_HANDLED; | |
| } | |
| /** | |
| * Initialize a UMC RC interface: map regions, get (shared) IRQ | |
| */ | |
| static | |
| int whcrc_setup_rc_umc(struct whcrc *whcrc) | |
| { | |
| int result = 0; | |
| struct device *dev = &whcrc->umc_dev->dev; | |
| struct umc_dev *umc_dev = whcrc->umc_dev; | |
| whcrc->area = umc_dev->resource.start; | |
| whcrc->rc_len = resource_size(&umc_dev->resource); | |
| result = -EBUSY; | |
| if (request_mem_region(whcrc->area, whcrc->rc_len, KBUILD_MODNAME) == NULL) { | |
| dev_err(dev, "can't request URC region (%zu bytes @ 0x%lx): %d\n", | |
| whcrc->rc_len, whcrc->area, result); | |
| goto error_request_region; | |
| } | |
| whcrc->rc_base = ioremap_nocache(whcrc->area, whcrc->rc_len); | |
| if (whcrc->rc_base == NULL) { | |
| dev_err(dev, "can't ioremap registers (%zu bytes @ 0x%lx): %d\n", | |
| whcrc->rc_len, whcrc->area, result); | |
| goto error_ioremap_nocache; | |
| } | |
| result = request_irq(umc_dev->irq, whcrc_irq_cb, IRQF_SHARED, | |
| KBUILD_MODNAME, whcrc); | |
| if (result < 0) { | |
| dev_err(dev, "can't allocate IRQ %d: %d\n", | |
| umc_dev->irq, result); | |
| goto error_request_irq; | |
| } | |
| result = -ENOMEM; | |
| whcrc->cmd_buf = dma_alloc_coherent(&umc_dev->dev, PAGE_SIZE, | |
| &whcrc->cmd_dma_buf, GFP_KERNEL); | |
| if (whcrc->cmd_buf == NULL) { | |
| dev_err(dev, "Can't allocate cmd transfer buffer\n"); | |
| goto error_cmd_buffer; | |
| } | |
| whcrc->evt_buf = dma_alloc_coherent(&umc_dev->dev, PAGE_SIZE, | |
| &whcrc->evt_dma_buf, GFP_KERNEL); | |
| if (whcrc->evt_buf == NULL) { | |
| dev_err(dev, "Can't allocate evt transfer buffer\n"); | |
| goto error_evt_buffer; | |
| } | |
| return 0; | |
| error_evt_buffer: | |
| dma_free_coherent(&umc_dev->dev, PAGE_SIZE, whcrc->cmd_buf, | |
| whcrc->cmd_dma_buf); | |
| error_cmd_buffer: | |
| free_irq(umc_dev->irq, whcrc); | |
| error_request_irq: | |
| iounmap(whcrc->rc_base); | |
| error_ioremap_nocache: | |
| release_mem_region(whcrc->area, whcrc->rc_len); | |
| error_request_region: | |
| return result; | |
| } | |
| /** | |
| * Release RC's UMC resources | |
| */ | |
| static | |
| void whcrc_release_rc_umc(struct whcrc *whcrc) | |
| { | |
| struct umc_dev *umc_dev = whcrc->umc_dev; | |
| dma_free_coherent(&umc_dev->dev, PAGE_SIZE, whcrc->evt_buf, | |
| whcrc->evt_dma_buf); | |
| dma_free_coherent(&umc_dev->dev, PAGE_SIZE, whcrc->cmd_buf, | |
| whcrc->cmd_dma_buf); | |
| free_irq(umc_dev->irq, whcrc); | |
| iounmap(whcrc->rc_base); | |
| release_mem_region(whcrc->area, whcrc->rc_len); | |
| } | |
| /** | |
| * whcrc_start_rc - start a WHCI radio controller | |
| * @whcrc: the radio controller to start | |
| * | |
| * Reset the UMC device, start the radio controller, enable events and | |
| * finally enable interrupts. | |
| */ | |
| static int whcrc_start_rc(struct uwb_rc *rc) | |
| { | |
| struct whcrc *whcrc = rc->priv; | |
| struct device *dev = &whcrc->umc_dev->dev; | |
| /* Reset the thing */ | |
| le_writel(URCCMD_RESET, whcrc->rc_base + URCCMD); | |
| if (whci_wait_for(dev, whcrc->rc_base + URCCMD, URCCMD_RESET, 0, | |
| 5000, "hardware reset") < 0) | |
| return -EBUSY; | |
| /* Set the event buffer, start the controller (enable IRQs later) */ | |
| le_writel(0, whcrc->rc_base + URCINTR); | |
| le_writel(URCCMD_RS, whcrc->rc_base + URCCMD); | |
| if (whci_wait_for(dev, whcrc->rc_base + URCSTS, URCSTS_HALTED, 0, | |
| 5000, "radio controller start") < 0) | |
| return -ETIMEDOUT; | |
| whcrc_enable_events(whcrc); | |
| le_writel(URCINTR_EN_ALL, whcrc->rc_base + URCINTR); | |
| return 0; | |
| } | |
| /** | |
| * whcrc_stop_rc - stop a WHCI radio controller | |
| * @whcrc: the radio controller to stop | |
| * | |
| * Disable interrupts and cancel any pending event processing work | |
| * before clearing the Run/Stop bit. | |
| */ | |
| static | |
| void whcrc_stop_rc(struct uwb_rc *rc) | |
| { | |
| struct whcrc *whcrc = rc->priv; | |
| struct umc_dev *umc_dev = whcrc->umc_dev; | |
| le_writel(0, whcrc->rc_base + URCINTR); | |
| cancel_work_sync(&whcrc->event_work); | |
| le_writel(0, whcrc->rc_base + URCCMD); | |
| whci_wait_for(&umc_dev->dev, whcrc->rc_base + URCSTS, | |
| URCSTS_HALTED, URCSTS_HALTED, 100, "radio controller stop"); | |
| } | |
| static void whcrc_init(struct whcrc *whcrc) | |
| { | |
| spin_lock_init(&whcrc->irq_lock); | |
| init_waitqueue_head(&whcrc->cmd_wq); | |
| INIT_WORK(&whcrc->event_work, whcrc_event_work); | |
| } | |
| /** | |
| * Initialize the radio controller. | |
| * | |
| * NOTE: we setup whcrc->uwb_rc before calling uwb_rc_add(); in the | |
| * IRQ handler we use that to determine if the hw is ready to | |
| * handle events. Looks like a race condition, but it really is | |
| * not. | |
| */ | |
| static | |
| int whcrc_probe(struct umc_dev *umc_dev) | |
| { | |
| int result; | |
| struct uwb_rc *uwb_rc; | |
| struct whcrc *whcrc; | |
| struct device *dev = &umc_dev->dev; | |
| result = -ENOMEM; | |
| uwb_rc = uwb_rc_alloc(); | |
| if (uwb_rc == NULL) { | |
| dev_err(dev, "unable to allocate RC instance\n"); | |
| goto error_rc_alloc; | |
| } | |
| whcrc = kzalloc(sizeof(*whcrc), GFP_KERNEL); | |
| if (whcrc == NULL) { | |
| dev_err(dev, "unable to allocate WHC-RC instance\n"); | |
| goto error_alloc; | |
| } | |
| whcrc_init(whcrc); | |
| whcrc->umc_dev = umc_dev; | |
| result = whcrc_setup_rc_umc(whcrc); | |
| if (result < 0) { | |
| dev_err(dev, "Can't setup RC UMC interface: %d\n", result); | |
| goto error_setup_rc_umc; | |
| } | |
| whcrc->uwb_rc = uwb_rc; | |
| uwb_rc->owner = THIS_MODULE; | |
| uwb_rc->cmd = whcrc_cmd; | |
| uwb_rc->reset = whcrc_reset; | |
| uwb_rc->start = whcrc_start_rc; | |
| uwb_rc->stop = whcrc_stop_rc; | |
| result = uwb_rc_add(uwb_rc, dev, whcrc); | |
| if (result < 0) | |
| goto error_rc_add; | |
| umc_set_drvdata(umc_dev, whcrc); | |
| return 0; | |
| error_rc_add: | |
| whcrc_release_rc_umc(whcrc); | |
| error_setup_rc_umc: | |
| kfree(whcrc); | |
| error_alloc: | |
| uwb_rc_put(uwb_rc); | |
| error_rc_alloc: | |
| return result; | |
| } | |
| /** | |
| * Clean up the radio control resources | |
| * | |
| * When we up the command semaphore, everybody possibly held trying to | |
| * execute a command should be granted entry and then they'll see the | |
| * host is quiescing and up it (so it will chain to the next waiter). | |
| * This should not happen (in any case), as we can only remove when | |
| * there are no handles open... | |
| */ | |
| static void whcrc_remove(struct umc_dev *umc_dev) | |
| { | |
| struct whcrc *whcrc = umc_get_drvdata(umc_dev); | |
| struct uwb_rc *uwb_rc = whcrc->uwb_rc; | |
| umc_set_drvdata(umc_dev, NULL); | |
| uwb_rc_rm(uwb_rc); | |
| whcrc_release_rc_umc(whcrc); | |
| kfree(whcrc); | |
| uwb_rc_put(uwb_rc); | |
| } | |
| static int whcrc_pre_reset(struct umc_dev *umc) | |
| { | |
| struct whcrc *whcrc = umc_get_drvdata(umc); | |
| struct uwb_rc *uwb_rc = whcrc->uwb_rc; | |
| uwb_rc_pre_reset(uwb_rc); | |
| return 0; | |
| } | |
| static int whcrc_post_reset(struct umc_dev *umc) | |
| { | |
| struct whcrc *whcrc = umc_get_drvdata(umc); | |
| struct uwb_rc *uwb_rc = whcrc->uwb_rc; | |
| return uwb_rc_post_reset(uwb_rc); | |
| } | |
| /* PCI device ID's that we handle [so it gets loaded] */ | |
| static struct pci_device_id __used whcrc_id_table[] = { | |
| { PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) }, | |
| { /* empty last entry */ } | |
| }; | |
| MODULE_DEVICE_TABLE(pci, whcrc_id_table); | |
| static struct umc_driver whcrc_driver = { | |
| .name = "whc-rc", | |
| .cap_id = UMC_CAP_ID_WHCI_RC, | |
| .probe = whcrc_probe, | |
| .remove = whcrc_remove, | |
| .pre_reset = whcrc_pre_reset, | |
| .post_reset = whcrc_post_reset, | |
| }; | |
| static int __init whcrc_driver_init(void) | |
| { | |
| return umc_driver_register(&whcrc_driver); | |
| } | |
| module_init(whcrc_driver_init); | |
| static void __exit whcrc_driver_exit(void) | |
| { | |
| umc_driver_unregister(&whcrc_driver); | |
| } | |
| module_exit(whcrc_driver_exit); | |
| MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); | |
| MODULE_DESCRIPTION("Wireless Host Controller Radio Control Driver"); | |
| MODULE_LICENSE("GPL"); |