| /* | |
| * lms501kf03 TFT LCD panel driver. | |
| * | |
| * Copyright (c) 2012 Samsung Electronics Co., Ltd. | |
| * Author: Jingoo Han <jg1.han@samsung.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| */ | |
| #include <linux/backlight.h> | |
| #include <linux/delay.h> | |
| #include <linux/fb.h> | |
| #include <linux/gpio.h> | |
| #include <linux/lcd.h> | |
| #include <linux/module.h> | |
| #include <linux/spi/spi.h> | |
| #include <linux/wait.h> | |
| #define COMMAND_ONLY 0x00 | |
| #define DATA_ONLY 0x01 | |
| struct lms501kf03 { | |
| struct device *dev; | |
| struct spi_device *spi; | |
| unsigned int power; | |
| struct lcd_device *ld; | |
| struct lcd_platform_data *lcd_pd; | |
| }; | |
| static const unsigned char seq_password[] = { | |
| 0xb9, 0xff, 0x83, 0x69, | |
| }; | |
| static const unsigned char seq_power[] = { | |
| 0xb1, 0x01, 0x00, 0x34, 0x06, 0x00, 0x14, 0x14, 0x20, 0x28, | |
| 0x12, 0x12, 0x17, 0x0a, 0x01, 0xe6, 0xe6, 0xe6, 0xe6, 0xe6, | |
| }; | |
| static const unsigned char seq_display[] = { | |
| 0xb2, 0x00, 0x2b, 0x03, 0x03, 0x70, 0x00, 0xff, 0x00, 0x00, | |
| 0x00, 0x00, 0x03, 0x03, 0x00, 0x01, | |
| }; | |
| static const unsigned char seq_rgb_if[] = { | |
| 0xb3, 0x09, | |
| }; | |
| static const unsigned char seq_display_inv[] = { | |
| 0xb4, 0x01, 0x08, 0x77, 0x0e, 0x06, | |
| }; | |
| static const unsigned char seq_vcom[] = { | |
| 0xb6, 0x4c, 0x2e, | |
| }; | |
| static const unsigned char seq_gate[] = { | |
| 0xd5, 0x00, 0x05, 0x03, 0x29, 0x01, 0x07, 0x17, 0x68, 0x13, | |
| 0x37, 0x20, 0x31, 0x8a, 0x46, 0x9b, 0x57, 0x13, 0x02, 0x75, | |
| 0xb9, 0x64, 0xa8, 0x07, 0x0f, 0x04, 0x07, | |
| }; | |
| static const unsigned char seq_panel[] = { | |
| 0xcc, 0x02, | |
| }; | |
| static const unsigned char seq_col_mod[] = { | |
| 0x3a, 0x77, | |
| }; | |
| static const unsigned char seq_w_gamma[] = { | |
| 0xe0, 0x00, 0x04, 0x09, 0x0f, 0x1f, 0x3f, 0x1f, 0x2f, 0x0a, | |
| 0x0f, 0x10, 0x16, 0x18, 0x16, 0x17, 0x0d, 0x15, 0x00, 0x04, | |
| 0x09, 0x0f, 0x38, 0x3f, 0x20, 0x39, 0x0a, 0x0f, 0x10, 0x16, | |
| 0x18, 0x16, 0x17, 0x0d, 0x15, | |
| }; | |
| static const unsigned char seq_rgb_gamma[] = { | |
| 0xc1, 0x01, 0x03, 0x07, 0x0f, 0x1a, 0x22, 0x2c, 0x33, 0x3c, | |
| 0x46, 0x4f, 0x58, 0x60, 0x69, 0x71, 0x79, 0x82, 0x89, 0x92, | |
| 0x9a, 0xa1, 0xa9, 0xb1, 0xb9, 0xc1, 0xc9, 0xcf, 0xd6, 0xde, | |
| 0xe5, 0xec, 0xf3, 0xf9, 0xff, 0xdd, 0x39, 0x07, 0x1c, 0xcb, | |
| 0xab, 0x5f, 0x49, 0x80, 0x03, 0x07, 0x0f, 0x19, 0x20, 0x2a, | |
| 0x31, 0x39, 0x42, 0x4b, 0x53, 0x5b, 0x63, 0x6b, 0x73, 0x7b, | |
| 0x83, 0x8a, 0x92, 0x9b, 0xa2, 0xaa, 0xb2, 0xba, 0xc2, 0xca, | |
| 0xd0, 0xd8, 0xe1, 0xe8, 0xf0, 0xf8, 0xff, 0xf7, 0xd8, 0xbe, | |
| 0xa7, 0x39, 0x40, 0x85, 0x8c, 0xc0, 0x04, 0x07, 0x0c, 0x17, | |
| 0x1c, 0x23, 0x2b, 0x34, 0x3b, 0x43, 0x4c, 0x54, 0x5b, 0x63, | |
| 0x6a, 0x73, 0x7a, 0x82, 0x8a, 0x91, 0x98, 0xa1, 0xa8, 0xb0, | |
| 0xb7, 0xc1, 0xc9, 0xcf, 0xd9, 0xe3, 0xea, 0xf4, 0xff, 0x00, | |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
| }; | |
| static const unsigned char seq_up_dn[] = { | |
| 0x36, 0x10, | |
| }; | |
| static const unsigned char seq_sleep_in[] = { | |
| 0x10, | |
| }; | |
| static const unsigned char seq_sleep_out[] = { | |
| 0x11, | |
| }; | |
| static const unsigned char seq_display_on[] = { | |
| 0x29, | |
| }; | |
| static const unsigned char seq_display_off[] = { | |
| 0x10, | |
| }; | |
| static int lms501kf03_spi_write_byte(struct lms501kf03 *lcd, int addr, int data) | |
| { | |
| u16 buf[1]; | |
| struct spi_message msg; | |
| struct spi_transfer xfer = { | |
| .len = 2, | |
| .tx_buf = buf, | |
| }; | |
| buf[0] = (addr << 8) | data; | |
| spi_message_init(&msg); | |
| spi_message_add_tail(&xfer, &msg); | |
| return spi_sync(lcd->spi, &msg); | |
| } | |
| static int lms501kf03_spi_write(struct lms501kf03 *lcd, unsigned char address, | |
| unsigned char command) | |
| { | |
| return lms501kf03_spi_write_byte(lcd, address, command); | |
| } | |
| static int lms501kf03_panel_send_sequence(struct lms501kf03 *lcd, | |
| const unsigned char *wbuf, | |
| unsigned int len) | |
| { | |
| int ret = 0, i = 0; | |
| while (i < len) { | |
| if (i == 0) | |
| ret = lms501kf03_spi_write(lcd, COMMAND_ONLY, wbuf[i]); | |
| else | |
| ret = lms501kf03_spi_write(lcd, DATA_ONLY, wbuf[i]); | |
| if (ret) | |
| break; | |
| i += 1; | |
| } | |
| return ret; | |
| } | |
| static int lms501kf03_ldi_init(struct lms501kf03 *lcd) | |
| { | |
| int ret, i; | |
| static const unsigned char *init_seq[] = { | |
| seq_password, | |
| seq_power, | |
| seq_display, | |
| seq_rgb_if, | |
| seq_display_inv, | |
| seq_vcom, | |
| seq_gate, | |
| seq_panel, | |
| seq_col_mod, | |
| seq_w_gamma, | |
| seq_rgb_gamma, | |
| seq_sleep_out, | |
| }; | |
| static const unsigned int size_seq[] = { | |
| ARRAY_SIZE(seq_password), | |
| ARRAY_SIZE(seq_power), | |
| ARRAY_SIZE(seq_display), | |
| ARRAY_SIZE(seq_rgb_if), | |
| ARRAY_SIZE(seq_display_inv), | |
| ARRAY_SIZE(seq_vcom), | |
| ARRAY_SIZE(seq_gate), | |
| ARRAY_SIZE(seq_panel), | |
| ARRAY_SIZE(seq_col_mod), | |
| ARRAY_SIZE(seq_w_gamma), | |
| ARRAY_SIZE(seq_rgb_gamma), | |
| ARRAY_SIZE(seq_sleep_out), | |
| }; | |
| for (i = 0; i < ARRAY_SIZE(init_seq); i++) { | |
| ret = lms501kf03_panel_send_sequence(lcd, init_seq[i], | |
| size_seq[i]); | |
| if (ret) | |
| break; | |
| } | |
| /* | |
| * According to the datasheet, 120ms delay time is required. | |
| * After sleep out sequence, command is blocked for 120ms. | |
| * Thus, LDI should wait for 120ms. | |
| */ | |
| msleep(120); | |
| return ret; | |
| } | |
| static int lms501kf03_ldi_enable(struct lms501kf03 *lcd) | |
| { | |
| return lms501kf03_panel_send_sequence(lcd, seq_display_on, | |
| ARRAY_SIZE(seq_display_on)); | |
| } | |
| static int lms501kf03_ldi_disable(struct lms501kf03 *lcd) | |
| { | |
| return lms501kf03_panel_send_sequence(lcd, seq_display_off, | |
| ARRAY_SIZE(seq_display_off)); | |
| } | |
| static int lms501kf03_power_is_on(int power) | |
| { | |
| return (power) <= FB_BLANK_NORMAL; | |
| } | |
| static int lms501kf03_power_on(struct lms501kf03 *lcd) | |
| { | |
| int ret = 0; | |
| struct lcd_platform_data *pd; | |
| pd = lcd->lcd_pd; | |
| if (!pd->power_on) { | |
| dev_err(lcd->dev, "power_on is NULL.\n"); | |
| return -EINVAL; | |
| } | |
| pd->power_on(lcd->ld, 1); | |
| msleep(pd->power_on_delay); | |
| if (!pd->reset) { | |
| dev_err(lcd->dev, "reset is NULL.\n"); | |
| return -EINVAL; | |
| } | |
| pd->reset(lcd->ld); | |
| msleep(pd->reset_delay); | |
| ret = lms501kf03_ldi_init(lcd); | |
| if (ret) { | |
| dev_err(lcd->dev, "failed to initialize ldi.\n"); | |
| return ret; | |
| } | |
| ret = lms501kf03_ldi_enable(lcd); | |
| if (ret) { | |
| dev_err(lcd->dev, "failed to enable ldi.\n"); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int lms501kf03_power_off(struct lms501kf03 *lcd) | |
| { | |
| int ret = 0; | |
| struct lcd_platform_data *pd; | |
| pd = lcd->lcd_pd; | |
| ret = lms501kf03_ldi_disable(lcd); | |
| if (ret) { | |
| dev_err(lcd->dev, "lcd setting failed.\n"); | |
| return -EIO; | |
| } | |
| msleep(pd->power_off_delay); | |
| pd->power_on(lcd->ld, 0); | |
| return 0; | |
| } | |
| static int lms501kf03_power(struct lms501kf03 *lcd, int power) | |
| { | |
| int ret = 0; | |
| if (lms501kf03_power_is_on(power) && | |
| !lms501kf03_power_is_on(lcd->power)) | |
| ret = lms501kf03_power_on(lcd); | |
| else if (!lms501kf03_power_is_on(power) && | |
| lms501kf03_power_is_on(lcd->power)) | |
| ret = lms501kf03_power_off(lcd); | |
| if (!ret) | |
| lcd->power = power; | |
| return ret; | |
| } | |
| static int lms501kf03_get_power(struct lcd_device *ld) | |
| { | |
| struct lms501kf03 *lcd = lcd_get_data(ld); | |
| return lcd->power; | |
| } | |
| static int lms501kf03_set_power(struct lcd_device *ld, int power) | |
| { | |
| struct lms501kf03 *lcd = lcd_get_data(ld); | |
| if (power != FB_BLANK_UNBLANK && power != FB_BLANK_POWERDOWN && | |
| power != FB_BLANK_NORMAL) { | |
| dev_err(lcd->dev, "power value should be 0, 1 or 4.\n"); | |
| return -EINVAL; | |
| } | |
| return lms501kf03_power(lcd, power); | |
| } | |
| static struct lcd_ops lms501kf03_lcd_ops = { | |
| .get_power = lms501kf03_get_power, | |
| .set_power = lms501kf03_set_power, | |
| }; | |
| static int lms501kf03_probe(struct spi_device *spi) | |
| { | |
| struct lms501kf03 *lcd = NULL; | |
| struct lcd_device *ld = NULL; | |
| int ret = 0; | |
| lcd = devm_kzalloc(&spi->dev, sizeof(struct lms501kf03), GFP_KERNEL); | |
| if (!lcd) | |
| return -ENOMEM; | |
| /* lms501kf03 lcd panel uses 3-wire 9-bit SPI Mode. */ | |
| spi->bits_per_word = 9; | |
| ret = spi_setup(spi); | |
| if (ret < 0) { | |
| dev_err(&spi->dev, "spi setup failed.\n"); | |
| return ret; | |
| } | |
| lcd->spi = spi; | |
| lcd->dev = &spi->dev; | |
| lcd->lcd_pd = dev_get_platdata(&spi->dev); | |
| if (!lcd->lcd_pd) { | |
| dev_err(&spi->dev, "platform data is NULL\n"); | |
| return -EINVAL; | |
| } | |
| ld = devm_lcd_device_register(&spi->dev, "lms501kf03", &spi->dev, lcd, | |
| &lms501kf03_lcd_ops); | |
| if (IS_ERR(ld)) | |
| return PTR_ERR(ld); | |
| lcd->ld = ld; | |
| if (!lcd->lcd_pd->lcd_enabled) { | |
| /* | |
| * if lcd panel was off from bootloader then | |
| * current lcd status is powerdown and then | |
| * it enables lcd panel. | |
| */ | |
| lcd->power = FB_BLANK_POWERDOWN; | |
| lms501kf03_power(lcd, FB_BLANK_UNBLANK); | |
| } else { | |
| lcd->power = FB_BLANK_UNBLANK; | |
| } | |
| spi_set_drvdata(spi, lcd); | |
| dev_info(&spi->dev, "lms501kf03 panel driver has been probed.\n"); | |
| return 0; | |
| } | |
| static int lms501kf03_remove(struct spi_device *spi) | |
| { | |
| struct lms501kf03 *lcd = spi_get_drvdata(spi); | |
| lms501kf03_power(lcd, FB_BLANK_POWERDOWN); | |
| return 0; | |
| } | |
| #ifdef CONFIG_PM_SLEEP | |
| static int lms501kf03_suspend(struct device *dev) | |
| { | |
| struct lms501kf03 *lcd = dev_get_drvdata(dev); | |
| dev_dbg(dev, "lcd->power = %d\n", lcd->power); | |
| /* | |
| * when lcd panel is suspend, lcd panel becomes off | |
| * regardless of status. | |
| */ | |
| return lms501kf03_power(lcd, FB_BLANK_POWERDOWN); | |
| } | |
| static int lms501kf03_resume(struct device *dev) | |
| { | |
| struct lms501kf03 *lcd = dev_get_drvdata(dev); | |
| lcd->power = FB_BLANK_POWERDOWN; | |
| return lms501kf03_power(lcd, FB_BLANK_UNBLANK); | |
| } | |
| #endif | |
| static SIMPLE_DEV_PM_OPS(lms501kf03_pm_ops, lms501kf03_suspend, | |
| lms501kf03_resume); | |
| static void lms501kf03_shutdown(struct spi_device *spi) | |
| { | |
| struct lms501kf03 *lcd = spi_get_drvdata(spi); | |
| lms501kf03_power(lcd, FB_BLANK_POWERDOWN); | |
| } | |
| static struct spi_driver lms501kf03_driver = { | |
| .driver = { | |
| .name = "lms501kf03", | |
| .pm = &lms501kf03_pm_ops, | |
| }, | |
| .probe = lms501kf03_probe, | |
| .remove = lms501kf03_remove, | |
| .shutdown = lms501kf03_shutdown, | |
| }; | |
| module_spi_driver(lms501kf03_driver); | |
| MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>"); | |
| MODULE_DESCRIPTION("lms501kf03 LCD Driver"); | |
| MODULE_LICENSE("GPL"); |